Ultrasound sensing at thermomechanical limits with optomechanical buckled-dome microcavities.

We describe the use of monolithic, buckled-dome cavities as ultrasound sensors. Patterned delamination within a compressively stressed thin film stack produces high-finesse plano-concave optical resonators with sealed and empty cavity regions. The buckled mirror also functions as a flexible membrane, highly responsive to changes in external pressure. Owing to their efficient opto-acousto-mechanical coupling, thermal-displacement-noise limited sensitivity is achieved at low optical interrogation powers and for modest optical (Q ∼ 103) and mechanical (Q ∼ 102) quality factors. We predict and verify broadband (up to ∼ 5 MHz), air-coupled ultrasound detection with noise-equivalent pressure (NEP) as low as ∼ 30-100 µPa/Hz1/2. This corresponds to an ultrasonic force sensitivity ∼ 2 × 10-13 N/Hz1/2 and enables the detection of MHz-range signals propagated over distances as large as ∼ 20 cm in air. In water, thermal-noise-limited sensitivity is demonstrated over a wide frequency range (up to ∼ 30 MHz), with NEP as low as ∼ 100-800 µPa/Hz1/2. These cavities exhibit a nearly omnidirectional response, while being ∼ 3-4 orders of magnitude more sensitive than piezoelectric devices of similar size. Easily realized as large arrays and naturally suited to direct coupling by free-space beams or optical fibers, they offer significant practical advantages over competing optical devices, and thus could be of interest for several emerging applications in medical and industrial ultrasound imaging.

Label-free in vivo fiber-based optical-resolution photoacoustic microscopy.

In this Letter, the capability of label-free fiber-based optical-resolution photoacoustic microscopy is demonstrated. This real-time imaging system takes advantage of image-guide fibers and a unique fiber laser. The 800 µm image-guide consists of 30,000 individual single-mode fibers in a bundle and the diode-pumped, pulsed Ytterbium fiber laser is utilized to perform up to 600 kHz repetition rate. Phantom studies indicate 7 µm resolution. The proposed setup keeps many of the powerful properties of previous tabletop OR-PAM systems, but also offers a submillimeter probe footprint and high flexibility due to the nature of the image-guide. This system could have significant clinical impact for endoscopic applications where the thin fiber can be inserted into the body.

Realtime photoacoustic microscopy of murine cardiovascular dynamics.

Non-invasive visualization of cardiovascular dynamics in small animals is challenging due to their rapid heart-rates. We present a realtime photoacoustic imaging system consisting of a 30-MHz ultrasound array transducer, receive electronics, a high-repetition-rate laser, and a multicore-computer, and demonstrate its ability to image optically-absorbing structures of the beating hearts of young athymic nude mice at rates of approximately 50 frames per second with 100 microm x 25 microm spatial resolution. To our knowledge this is the first report of realtime photoacoustic imaging of physiological dynamics.