On a nonlinear hybrid method for multiscale analysis of a bearing-capacity test of a real-scale segmental tunnel ring.

A nonlinear hybrid method is developed for multiscale analysis of a bearing-capacity test of a real-scale segmental tunnel ring subjected to point loads. The structural analysis consists of two parts. Part I refers to modeling of bending-induced tensile cracking of the segments, resulting from the external loading. The segments are subdivided into elements, according to the crack spacing. Each element is either intact or contains one central crack band, flanked by lateral undamaged domains. A multiscale model for tensile softening of concrete is used to describe the progressive deterioration of the crack bands. After iterative determination of their state of damage, the effective bending and extensional stiffnesses of the corresponding elements are quantified by means of Voigt-Reuss-Hill estimates. The effective stiffnesses are used for linear-elastic simulations of the segmental tunnel ring. Part II refers to the relative rotation angles at the joints, which are estimated from monitoring data, using the Bernoulli-Euler hypothesis. Since the validity of this hypothesis is questionable for neck-like joints, the relative rotation angles are post-processed such that they refer to rigid body displacements of the segments. The following conclusions are drawn: The presented approach yields good estimates of crack widths. Relative rotation angles at the joints mainly result in rigid body displacements of the segments, governing the convergences. Because realistic interface models are lacking, hybrid analysis based on displacement-monitoring data allows for performing ultimate-load analysis of segmental tunnel rings.

Carbon-Supported Nickel Selenide Hollow Nanowires as Advanced Anode Materials for Sodium-Ion Batteries.

Carbon-supported nickel selenide (Ni0.85 Se/C) hollow nanowires are prepared from carbon-coated selenium nanowires via a self-templating hydrothermal method, by first dissolving selenium in the Se/C nanowires in hydrazine, allowing it to diffuse out of the carbon layer, and then reacting with nickel ions into Ni0.85 Se nanoplates on the outer surface of the carbon. Ni0.85 Se/C hollow nanowires are employed as anode materials for sodium-ion batteries, and their electrochemical performance is evaluated via the cyclic voltammetry and electrochemical impedance spectroscopy combined with ex situ X-ray photoelectron spectroscopy and X-ray diffraction measurements. It is found that Ni0.85 Se/C hollow nanowires exhibit greatly enhanced cycle stability and rate capability as compared to Ni0.85 Se nanoparticles, with a reversible capacity around 390 mA h g-1 (the theoretical capacity is 416 mA h g-1 ) at the rate of 0.2 C and 97% capacity retention after 100 cycles. When the current rate is raised to 5 C, they still deliver capacity of 219 mA h g-1 . The synthetic methodology introduced here is general and can easily be applied to building similar structures for other metal selenides in the future.

Oleanolic acid activates daf-16 to increase lifespan in Caenorhabditis elegans.

Oleanolic acid (OA) is an active ingredient in natural plants. It has been reported to possess a variety of pharmacological activities, but very little is known about its effects of anti-aging. We investigate here whether OA has an impact on longevity in vivo, and more specifically, we have examined effects of OA on the lifespan and stress tolerance in Caenorhabditis elegans (C. elegans). Our results showed that OA could extend the lifespan, increase its stress resistance and reduce the intracellular reactive oxygen species (ROS) in wild-type worms. Moreover, we have found that OA-induced longevity may not be associated with the calorie restriction (CR) mechanism. Our mechanistic studies using daf-16 loss-of-function mutant strains (GR1307) indicated that the extension of lifespan by OA requires daf-16. In addition, OA treatment could also modulate the nuclear localization, and the quantitative real-time PCR results revealed that up-regulation of daf-16 target genes such as sod-3, hsp-16.2 and ctl-1 could prolong lifespan and increase stress response in C. elegans. This study overall uncovers the longevity effect of OA and its underpinning mechanisms.

The longevity effect of echinacoside in Caenorhabditis elegans mediated through daf-16.

Echinacoside (ECH), a natural polyphenolic compound, has been reported to possess important pharmacological activities. However, very little is known about whether or how ECH affects longevity in vivo. We have examined the effects of ECH on the life span and stress tolerance in Caenorhabditis elegans. Our studies demonstrate that the life span of wild-type worms could be extended in the presence of ECH. Furthermore, ECH was found to increase tolerance of worms to heat shock and oxidative stress, while not exerting any influence on pharyngeal pumping rate and progeny production. Our mechanistic studies indicate that supplementation of ECH increases the transcript level of daf-16. ECH treatment also modulates the nuclear localization and transcriptional activities of daf-16, thus fine tunes the expression of daf-16 target genes to promote longevity and increases stress response in C. elegans. Overall, this work reveals the longevity effect of ECH and elucidates the underpinning mechanisms.

Enhancement of the cycling performance of Li3V2(PO4)3/C by stabilizing the crystal structure through Zn²âº doping.

A series of Li3V(2-2/3x)Zn(x)(PO4)3/C phases were synthesized by carbon thermal reduction assisted by the ball-mill process. Scanning electron microscopy (SEM) showed that the irregular morphology of the pristine Li3V2(PO4)3/C could be transformed to spherical upon doping with a suitable amount of zinc. The structural stability of the pristine and the Zn doped Li3V2(PO4)3/C were investigated via X-ray absorption near edge structure (XANES) spectroscopy and X-ray diffraction (XRD). The results revealed that Zn doping not only improves the stability of the VO6 octahedral structures before electrochemical cycling, but also reduces the degree of irreversible expansion of the c axis and the crystal volume upon repeated cycles. Among the Li3V(2-2/3x)Zn(x)(PO4)3/C (0 ≤x≤ 0.15) series, the sample doped with 0.05 Zn atoms per formula unit showed the best electrochemical performance. Excess Zn doping (x > 0.05) didn't result in further improvement in the electrochemical performance due to the segregation effect and the inactive nature of Zn.

Dimensionless analysis-based permeability model of reinforced concrete under tension.

Water permeability of reinforced concrete is essential for transportation of ingress ions inside concrete structures. The coupling effect of permeability and loading presents a challenge for the experimental simulation of water-permeate reinforced concrete subjected to tension. This renders the development of the model based on dimensionless analysis, using a series of experimental tests from an innovative experimental system that allows simultaneous measurement of permeability and crack width. The experiments focused on both ordinary concrete and high strength concrete under tension. The relationship between permeability and variables such as deformation, diameter of rebars, tensile load, and crack width under tension was formulated through multiple regression analysis using the testing data. The load to deformation characteristics determines the permeability of the concrete under tension. The proposed model accounts for the influence of continuous loading on permeability, as demonstrated by the robust analysis and proposed yield effective point. The robust analysis demonstrates that the diameter of the rebar, load, and crack width exert minimal influence on the permeability of concrete at lower significance levels. However, permeability variations become pronounced from 0.5 threshold, with significant changes observed between 0.5 and 0.9 thresholds. The findings indicate a differential impact of the variables on the permeability of concrete under tension. The yield-effective points delineate the relationship between the rebar diameter, load, and crack-width on the permeability of concrete with a threshold of 0.5, 0.5, and 0.58, respectively. At a threshold of 0.78, higher permeability will occur in the concrete, attributed to the prevalence of deformation. This deformation highlights the parameters with the most significant influence on the permeability of concrete under tension. The robust analysis and yield effective point derivative are useful parameters to measure concrete permeability and evaluate the behavior of the permeability model under tension.

The Time-Dependent Interfacial Adhesion between Artificial Rock and Fresh Mortar Modified by Nanoclay.

The time-dependent interfacial adhesion between rock and fresh mortar is key for printing concrete linings in mountain tunnels. However, a scientific deficit exists in the time-dependent evolution of the interfacial adhesion, which can cause adhesion failure when printing tunnel lining. Nanoclay has the potential to increase the interfacial adhesion and eliminate the adhesion failure. Before the actual printing of tunnel linings, the time-dependent interfacial adhesion between artificial rock and fresh mortar modified by nanoclay should be understood. This paper studied the time-dependent interfacial adhesion based on fast tack tests, fast shear tests, and isothermal calorimetry tests. With the addition of nanoclay, the maximum tensile stress and the maximum shear stress increased. Compared with a reference series, the maximum interfacial tensile stress in a 0.3% nanoclay series increased by 106% (resting time 1 min) and increased by 209% (resting time 32 min). A two-stage evolution of the interfacial adhesion was found with the addition of nanoclay. In the first stage, the time-dependent interfacial adhesion increased rapidly. A 0.3% NC series showed an increase rate six times higher than that of the reference series. As the matrices aged, the increase rate slowed down and followed a linear pattern of increase, still higher than that of the reference series. The stiffening of fresh matrices resulted in the interface failure mode transition from a ductile failure to a brittle failure. The effect of nanoclay on flocculation and on accelerating the hydration contributed to the time-dependent interfacial adhesion between artificial rock and fresh mortar.

Effects of artificial light at night and drought on the photosynthesis and physiological traits of two urban plants.

Urban plants are currently confronted with the stresses posed by artificial light at night (ALAN) and drought. A field block experiment was designed to explore the potential effects of ALAN and drought on the photosynthesis and physiological characters of two common urban plants, Euonymus japonicus (E. japonicus) and Rosa hybrida (R. hybrida). Each plant species was subjected to four distinct treatments: neither ALAN nor drought, ALAN, drought, and both ALAN and drought. The result showed the following: (1) ALAN significantly reduced the effective quantum yield (ΦPSII), apparent electron transfer rate (ETR), photochemical quenching parameter (qp), net photosynthetic (Pn), stomatal conductance (Gs), stomatal limit value (Ls), and the pigment concentrations and remarkably increased the content of malondialdehyde (MDA), total antioxidant capacity (TAC), and starch in both E. japonicus and R. hybrida. Furthermore, ALAN increased the soluble saccharides of E. japonicus, and this effect of ALAN also occurred on R. hybrida under drought. (2) Drought significantly decreased the ΦPSII, ETR, qp, Pn, Gs, Ls, and the pigment concentrations and remarkably increased the content of MDA and TAC for both E. japonicus and R. hybrida. Moreover, drought did not significantly change the starch content of both species, and it significantly increased the content of soluble saccharides for E. japonicus. (3) The interaction between ALAN and drought occurred on the ΦPSII, ETR, Pn, MDA, and TAC of E. japonicus, but had no effect on R. hybrida. For urban areas affected by ALAN and drought, it is advisable to select plant species with strong stress resistance for gardening purposes, and plants directly exposed to ALAN should receive sufficient water during hot and dry weather conditions to maintain their normal growth.

Organic electrochromic energy storage materials and device design.

While not affecting electrochemical performance of energy storage devices, integrating multi-functional properties such as electrochromic functions into energy storage devices can effectively promote the development of multifunctional devices. Compared with inorganic electrochromic materials, organic materials possess the significant advantages of facile preparation, low cost, and large color contrast. Specifically, most polymer materials show excellent electrochemical properties, which can be widely used in the design and development of energy storage devices. In this article, we focus on the application of organic electrochromic materials in energy storage devices. The working mechanisms, electrochemical performance of different types of organics as well as the shortcomings of organic electrochromic materials in related devices are discussed in detail.

Strategies for Stabilization of Zn Anodes for Aqueous Zn-Based Batteries: A Mini Review.

In recent years, thanks to the investigation of the in-depth mechanism, novel cathode material exploitation, and electrolyte optimization, the electrochemical performance of rechargeable Zn-based batteries (RZBs) has been significantly improved. Nevertheless, there are still some persistent challenges locating the instability of the Zn anodes that hinder the commercialization and industrialization of RZBs, especially the obstinate dendrites and hydrogen evolution reaction (HER) on Zn anodes, which will dramatically compromise the cycle stability and Coulombic efficiency. Therefore, various strategies with fundamental design principles focusing on the suppression of dendrite and the HER have been carefully summarized and categorized in this review, which are critically dissected according to the intrinsic mechanisms. Finally, pertinent insights into the challenges and perspectives on the future development of Zn anodes are also emphasized, expecting to supply potential research directions to promote the practical applications of RZBs.

Stable Cycling of High-Voltage Lithium-Metal Batteries Enabled by High-Concentration FEC-Based Electrolyte.

Functional electrolytes that are stable toward both Li-metal anode and high-voltage (>4 V vs Li/Li+) cathodes play a critical role in the development of high-energy density Li-metal batteries. Traditional carbonate-based electrolytes can hardly be used in high-voltage Li-metal batteries due to the dendritic Li deposits, low Coulombic efficiency, and anodic instability in the presence of aggressive cathodes. Herein, we design a concentrated dual-salt electrolyte that achieves high stability for both Li anodes and high-voltage cathodes of LiNi0.5Mn1.5O4 (LNMO) and LiNi0.7Co0.15Mn0.15O2 (NCM). A Li||Cu cell in the designed electrolyte shows a high Coulombic efficiency of >98% in long-term plating/stripping for 900 cycles. Li||LNMO and Li||NCM cells achieve a capacity retention of 88.5% over 500 cycles and 86.2% over 200 cycles with a cutoff voltage of 4.9 and 4.3 V, respectively. The Li||LNMO full cell with a cathode areal capacity of 1.8 mAh/cm2 and only 3× excess Li was fabricated, and it delivered a high capacity retention of 87.8% after 100 cycles. The reasons for the good cycling stability of the cells in a concentrated dual-salt electrolyte can be attributed to the reversible dendrite-free plating/stripping of a Li-metal anode and stable interfacial layers on both anode and cathode.

Application-oriented fundamental research on concrete and reinforced concrete structures: selected findings from an Austro-Chinese research project.

In this paper, the significance of application-oriented fundamental research on concrete and reinforced concrete structures for progress regarding practical applications to structural design is addressed based on four examples. They were treated in a joint research project of Vienna University of Technology and Tongji University. The first topic refers to sudden heating or cooling of concrete structures, the second one to high-dynamic strength of specimens made of cementitious materials, the third one to structural analysis of segmental tunnel rings used in mechanized tunneling, and the fourth one to serviceability and ultimate limit states of concrete hinges used in integral bridge construction. The first two topics deal with exceptional load cases. Results from the fundamental research call for improvements of state-of-the-art simulation approaches used in civil engineering design. The last two topics refer to reinforced concrete hinges used in mechanized tunneling and integral bridge construction, respectively. Integrative research has led to progress regarding the verification of serviceability and ultimate limit states. In all four examples, results from fundamental research are used to scrutinize state-of-the-art approaches used in practical structural design of civil engineering structures. This allows for identifying interesting directions for the future development of design guidelines and standards.

Comprehensive Review of P2-Type Na2/3Ni1/3Mn2/3O2, a Potential Cathode for Practical Application of Na-Ion Batteries.

P2-type Na2/3Ni1/3Mn2/3O2 is a promising cathode material for practical applications in Na-ion batteries, due to its high energy density, high volumetric capacity, excellent Na ion conductivity, ease of synthesis, and good stability in air. Yet, it is subject to structural rearrangements on charging to high voltage/low Na content and Na+/vacancy ordering transitions, which lead to poor reversibility and dramatic capacity decay upon cycling. In this Review, we present the latest advances related to Na2/3Ni1/3Mn2/3O2, with a main focus on strategies to stabilize the structural framework and improve the electrochemical properties. Practical issues and challenges are also proposed on the basis of current research status and progress.

Anisotropic particle in viscous shear flow: Navier slip, reciprocal symmetry, and Jeffery orbit.

The hydrodynamic reciprocal theorem for Stokes flows is generalized to incorporate the Navier slip boundary condition, which can be derived from Onsager's variational principle of least energy dissipation. The hydrodynamic reciprocal relations and the Jeffery orbit, both of which arise from the motion of a slippery anisotropic particle in a simple viscous shear flow, are investigated theoretically and numerically using the fluid particle dynamics method [Phys. Rev. Lett. 85, 1338 (2000)]. For a slippery elliptical particle in a linear shear flow, the hydrodynamic reciprocal relations between the rotational torque and the shear stress are studied and related to the Jeffery orbit, showing that the boundary slip can effectively enhance the anisotropy of the particle. Physically, by replacing the no-slip boundary condition with the Navier slip condition at the particle surface, the cross coupling between the rotational torque and the shear stress is enhanced, as manifested through a dimensionless parameter in both of the hydrodynamic reciprocal relations and the Jeffery orbit. In addition, simulations for a circular particle patterned with portions of no-slip and Navier slip are carried out, showing that the particle possesses an effective anisotropy and follows the Jeffery orbit as well. This effective anisotropy can be tuned by changing the ratio of no-slip portion to slip potion. The connection of the present work to nematic liquid crystals' constitutive relations is discussed.