Early versus Later Anticoagulation for Stroke with Atrial Fibrillation.

BACKGROUND: The effect of early as compared with later initiation of direct oral anticoagulants (DOACs) in persons with atrial fibrillation who have had an acute ischemic stroke is unclear. METHODS: We performed an investigator-initiated, open-label trial at 103 sites in 15 countries. Participants were randomly assigned in a 1:1 ratio to early anticoagulation (within 48 hours after a minor or moderate stroke or on day 6 or 7 after a major stroke) or later anticoagulation (day 3 or 4 after a minor stroke, day 6 or 7 after a moderate stroke, or day 12, 13, or 14 after a major stroke). Assessors were unaware of the trial-group assignments. The primary outcome was a composite of recurrent ischemic stroke, systemic embolism, major extracranial bleeding, symptomatic intracranial hemorrhage, or vascular death within 30 days after randomization. Secondary outcomes included the components of the composite primary outcome at 30 and 90 days. RESULTS: Of 2013 participants (37% with minor stroke, 40% with moderate stroke, and 23% with major stroke), 1006 were assigned to early anticoagulation and 1007 to later anticoagulation. A primary-outcome event occurred in 29 participants (2.9%) in the early-treatment group and 41 participants (4.1%) in the later-treatment group (risk difference, -1.18 percentage points; 95% confidence interval [CI], -2.84 to 0.47) by 30 days. Recurrent ischemic stroke occurred in 14 participants (1.4%) in the early-treatment group and 25 participants (2.5%) in the later-treatment group (odds ratio, 0.57; 95% CI, 0.29 to 1.07) by 30 days and in 18 participants (1.9%) and 30 participants (3.1%), respectively, by 90 days (odds ratio, 0.60; 95% CI, 0.33 to 1.06). Symptomatic intracranial hemorrhage occurred in 2 participants (0.2%) in both groups by 30 days. CONCLUSIONS: In this trial, the incidence of recurrent ischemic stroke, systemic embolism, major extracranial bleeding, symptomatic intracranial hemorrhage, or vascular death at 30 days was estimated to range from 2.8 percentage points lower to 0.5 percentage points higher (based on the 95% confidence interval) with early than with later use of DOACs. (Funded by the Swiss National Science Foundation and others; ELAN ClinicalTrials.gov number, NCT03148457.).

Analysis of the Rab GTPase Interactome in Dendritic Cells Reveals Anti-microbial Functions of the Rab32 Complex in Bacterial Containment.

Dendritic cells (DCs) orchestrate complex membrane trafficking through an interconnected transportation network linked together by Rab GTPases. Through a tandem affinity purification strategy and mass spectrometry, we depicted an interactomic landscape of major members of the mammalian Rab GTPase family. When complemented with imaging tools, this proteomic analysis provided a global view of intracellular membrane organization. Driven by this analysis, we investigated dynamic changes to the Rab32 subnetwork in DCs induced by L. monocytogenes infection and uncovered an essential role of this subnetwork in controlling the intracellular proliferation of L. monocytogenes. Mechanistically, Rab32 formed a persistent complex with two interacting proteins, PHB and PHB2, to encompass bacteria both during early phagosome formation and after L. monocytogenes escaped the original containment vacuole. Collectively, we have provided a functional compartmentalization overview and an organizational framework of intracellular Rab-mediated vesicle trafficking that can serve as a resource for future investigations.

Rational Design of F-Modified Polyester Electrolytes for Sustainable All-Solid-State Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) are one of the most practical candidates for solid-state batteries owing to their high flexibility and low production cost, but their application is limited by low Li+ conductivity and a narrow electrochemical window. To improve performance, it is necessary to reveal the structure-property relationship of SPEs. Here, 23 fluorinated linear polyesters were prepared by editing the coordination units, flexible linkage segments, and interface passivating groups. Besides the traditionally demonstrated coordinating capability and flexibility of polymer chains, the molecular asymmetry and resulting interchain aggregation are observed critical for Li+ conductivity. By tailoring the molecular asymmetry and coordination ability of polyesters, the Li+ conductivity can be raised by 10 times. Among these polyesters, solvent-free poly(pentanediol adipate) delivers the highest room-temperature Li+ conductivity of 0.59 × 10-4 S cm-1. The chelating coordination of oxalate and Li+ leads to an electron delocalization of alkoxy oxygen, enhancing the antioxidation capability of SPEs. To lower the cost, high-value LiTFSI in SPEs is recycled at 90%, and polyesters can be regenerated at 86%. This work elucidates the structure-property relationship of polyester-based SPEs, displays the design principles of SPEs, and provides a way for the development of sustainable solid-state batteries.

Biomass and Transparent Supramolecular Elastomers for Green Electronics Enabled by the Controlled Growth and Self-Assembly of Dynamic Polymer Networks.

Determining the optimal method for preparing supramolecular materials remains a profound challenge. This process requires a combination of renewable raw materials to create supramolecular materials with multiple functions and properties, including simple fabrication, sustainability, a dynamic nature, good toughness, and transparency. In this work, a strategy is presented for toughening supramolecular networks based on solid-phase chain extension. This toughening strategy is simple and environmentally friendly. In addition, a series of biobased elastomers are designed and prepared with adjustable performance characteristics. This strategy can significantly improve the transparency, tensile strength, and toughness of the synthesized elastomer. The synthesized biobased elastomers have great ductility, repairability, and recyclability, and they show good adhesion and dielectric properties. A biobased ionic skin is assembled from these biobased elastomers. Assembled ionic skin can sensitively detect external stimuli (such as stretching, bending, compression, or temperature changes) and monitor human movement. The conductive and dielectric layers of the biobased ionic skin are both obtained from renewable raw materials. This research provides novel molecular design approaches and material selection methods for promoting the development of green electronic devices and biobased elastomers.

Innovative Synthesis of Photo-Responsive, Self-Healing Silicone Elastomers with Enhanced Mechanical Properties and Thermal Stability.

Photo-responsive materials have garnered significant interest for their ability to react to non-contact stimuli, though achieving self-healing under gentle conditions remains an elusive goal. In this research, an innovative and straightforward approach for synthesizing silicone elastomers is proposed that not only self-heal at room temperature but also possess unique photochromic properties and adjustable mechanical strength, along with being both transparent and reprocessable. Initially, aldehyde-bifunctional dithiophene-ethylene molecules with dialdehyde groups (DTEM) and isocyanurate (IPDI) is introduced into the aminopropyl-terminated polydimethylsiloxane (H2N-PDMS-NH2) matrix. Subsequently, palladium is incorporated to enhance coordination within the matrix. These silicone elastomers transition to a blue state under 254 nm UV light and revert to transparency under 580 nm light. Remarkably, they demonstrate excellent thermal stability at temperatures up to 100 °C and show superior fatigue resistance. The optical switching capabilities of the silicone elastomers significantly affect both their mechanical characteristics and self-healing abilities. Notably, the PDMS-DTEM-IPDI-@Pd silicone elastomer, featuring closed-loop photo-switching molecules, exhibits a fracture toughness that is 1.3 times greater and a room temperature self-healing efficiency 1.4 times higher than its open-loop counterparts. This novel photo-responsive silicone elastomer offers promising potential for applications in data writing and erasure, UV protective coatings, and micro-trace development.

Topological Programmability of Isomerizable Polymers.

Topology isomerizable networks (TINs) can be programmed into numerous polymers exhibiting unique and spatially defined (thermo-) mechanical properties. However, capturing the dynamics in topological transformations and revealing the intrinsic mechanisms of mechanical property modulation at the microscopic level is a significant challenge. Here, we use a combination of coarse-grained molecular dynamics simulations and reaction kinetic theory to reveal the impact of dynamic bond exchange reactions on the topology of branched chains. We find that, the grafted units follow a geometric distribution with a converged uniformity, which depends solely on the average grafted units of branched chains. Furthermore, we demonstrate that the topological structure can lead to spontaneous modulation of mechanical properties. The theoretical framework provides a research paradigm for studying the topology and mechanical properties of TINs.

Manipulating the Properties of Polymer Vitrimer Nanocomposites by Designing Dual Dynamic Covalent Bonds.

Polymer vitrimer is a novel material that contains dynamic covalent bonds (DCBs) allowing it to combine the desirable characteristics of both thermoplastics and thermosets. Similar to the traditional polymer nanocomposites, introducing nanoparticles into polymer vitrimer is also an effective strategy to further enhance its properties. However, a comprehensive understanding of matrix and interfacial bond exchange reactions (BERs) to tailor the properties of polymer vitrimer nanocomposites (PVNs) is still lacking. Herein, we utilized coarse-grained molecular dynamics simulations to investigate model PVNs in which there are two different kinds of DCBs in the vitrimer matrix and at the interface. Our results show that the normalized bond autocorrelation function (Csw) confirms the independence of BERs in the vitrimer matrix and in the interface. By varying the bond swap energy barrier (ΔEsw) in the matrix ΔEswmat or in the interface ΔEswint, or in both ΔEswall, a maximum mechanical property is observed at the moderate value of ΔEswmat, ΔEswint, orΔEswall. Meanwhile, the effect of ΔEsw on the stress relaxation and the bond orientation as a function of the time under a fixed strain is well probed, which both decay more slowly at greater ΔEsw. We simulated the tension-recovery curve to examine the effect of ΔEsw on the hysteresis loss and permanent deformation of PVNs, finding an optimal value to achieve its minimum energy dissipation and maximum recovery ratio. Lastly, we investigated the efficiency of self-healing by building and removing walls from the system. Interestingly, a maximum self-healing efficiency of the stress-strain behavior is observed at moderate ΔEsw. Overall, this study provides valuable insights into the relationship between the structure and properties of PVNs, offering implications for the manipulation of their mechanical properties and enhancement of their self-healing capabilities.

Impact of Sacrificial Hydrogen Bonds on the Structure and Properties of Rubber Materials: Insights from All-Atom Molecular Dynamics Simulations.

The inclusion of sacrificial hydrogen bonds is crucial for advancing high-performance rubber materials. However, the molecular mechanisms governing the impact of these bonds on material properties remain unclear, hindering progress in advanced rubber material research. This study employed all-atom molecular dynamics simulations to thoroughly investigate how hydrogen bonds affect the structure, dynamics, mechanics, and linear viscoelasticity of rubber materials. As the modified repeating unit ratio (ß) increased, both interchain and intrachain hydrogen bond content rose, with interchain bonds playing a predominant role. This physical cross-linking network formed through interchain hydrogen bonds restricts molecular chain movement and relaxation and raises the glass transition temperature of rubber. Within a certain content of hydrogen bonds, the mechanical strength increases with increasing ß. However, further increasing ß leads to a subsequent decrease in the mechanical performance. Optimal mechanical properties were observed at ß = 6%. On the other hand, a higher ß value yields an elevated stress relaxation modulus and an extended stress relaxation plateau, signifying a more complex hydrogen-bond cross-linking network. Additionally, higher ß increases the storage modulus, loss modulus, and complex viscosity while reducing the loss factor. In summary, this study successfully established the relationship between the structure and properties of natural rubber containing hydrogen bonds, providing a scientific foundation for the design of high-performance rubber materials.

Dispersion, Dynamics, and Mechanics of Polymer Nanocomposites Filled with Rigid-Soft Janus Nanoparticles via Molecular Dynamics Simulation.

The introduction of nanoparticles (NPs) presents boundless possibilities for enhancing the performance of polymer nanocomposites (PNCs). Consequently, the design of novel NPs becomes of paramount significance for PNCs. In our study, we employ the dumbbell two-component model of Janus nanoparticles (JNPs) and design rigid-soft JNPs as fillers. Using coarse-grained molecular dynamics simulations, we systematically investigate the dispersion, dynamics, and mechanical properties of these novel PNCs. First, we determine the optimal dispersion conditions by studying rcutoff and εnp. The simulation indicates that when the interaction between polymer chains and JNPs is a repulsive potential, the JNPs tend to aggregate together, forming a cluster with soft NPs inside and rigid NPs outside. Conversely, under attractive interactions, JNPs show superior dispersion uniformity compared to the repulsive system, and as εnp increases, the dispersion improves. Then, the mean square displacement (MSD) indicates that JNPs effectively impede the mobility of polymer chains, with the degree of hindrance increasing as εnp grows; this effect is more pronounced in attractive systems. Comparing JNPs of different particle sizes, we find that smaller JNP systems exhibit higher temperature sensitivity. Furthermore, there exists a critical particle size (Dnp ≈ 5σ) under a constant filling fraction at which the NPs exert the most pronounced restriction effect on the polymer. Next, upon examining the mechanical behavior, we find that the rigid-soft JNPs demonstrate notable elasticity and variability compared to traditional NPs. This observation is confirmed through measurements of the bond orientation and mean square radius of gyration of the soft segments of JNPs. In summary, this research provides a comprehensive understanding of the intricate interplay among various factors, offering valuable insights for optimizing JNP dispersion and enhancing the mechanical properties of PNCs.

Thermal Conductivity of the Graphene/Polydimethylsiloxane Composite by Manipulating the Network Structure.

In this work, a nonequilibrium molecular dynamics simulation is utilized to explore the effect of network structure of graphene (GE) on the thermal conductivity of the GE/polydimethylsiloxane (PDMS) composite. First, the thermal conductivity of composites rises with increasing volume fraction of GE. The heat transfer ability via the GE channel is found to be nearly the same by analyzing the GE-GE interfacial thermal resistance (ITR). More heat energy is transferred via the GE channel at the high volume fraction of GE by calculating the GE heat transfer ratio, which leads to the high thermal conductivity. Then, the thermal conductivity of composites rises with increasing stacking area between GE, which is attributed to both the strong heat transfer ability via the GE channel and the high GE heat transfer ratio. Following it, the thermal conductivity of composites first rises and then drops down with increasing defect density for a single vacancy defect while it continuously increases for a single void defect. The heat transfer ability between GE is enhanced due to the formation of interlayer covalent bonds. However, the intrinsic thermal conductivity of GE is significantly reduced for a single vacancy defect while it remains relatively well for a single void defect. As a result, the GE heat transfer ratio is maximum at the intermediate defect density for a single vacancy defect while it rises monotonically for a single void defect, which can rationalize the thermal conductivity. Meanwhile, the relationship between ITR and the number of covalent bonds can be described by an empirical equation. Finally, the thermal conductivity for the stacked structure is larger than that for the noncontact structure or the intersected structure. In summary, this work provides a clear and novel understanding of how the network structure of GE influences the thermal conductivity of the GE/PDMS composite.

Comparison of the Interaction and Structure of Lignin in Pure Systems and in Asphalt Media by Molecular Dynamics Simulations.

Lignin is a class of organic aromatic polymers contributing to the rigidity and strength of plants and has been proposed as a modifier to improve asphalt performance on road pavement. However, contradicting experimental results on the lignin miscibility in asphalt were found from different studies, and lignin has been found to self-assemble in different solutions. Thus, investigating the interaction and microstructure of lignin in asphalt media in molecular detail is necessary. Molecular dynamics (MD) simulations using both the LAMMPS program with the OPLS-aa force field and the NAMD program with the CHARMM force field have been conducted on pure lignin (including lignin monomer, dimer, and polymer with 17 and 31 units) and their mixtures with model asphalt molecules at different temperatures. Consistent results were observed from both programs and force fields in terms of density, hydrogen bonds, diffusion coefficient, radius of gyration, and radial distribution function. Glass transition was observed in the pure lignin systems based on density and diffusion coefficient calculations at different temperatures. Lignin can form intramolecular hydrogen bonds and intermolecular hydrogen bonds with other lignin and 1,7-dimethylnapthalene in the asphalt mixture, which has dependence on temperature and lignin chain length. Correlating the lignin size and chain length using the power-law relationship showed that lignin polymers in pure systems are in quasi-relaxed structures at different temperatures; lignin molecules stay in quasi-relaxed structures in asphalt mixtures at high temperatures but in collapsed structures at low temperatures. Implementing lignin monomer, dimer, and polymer into the model asphalt mixture can improve its density. Although lignin in different chain lengths aggregates in asphalt, lignin can modify the packing between different components in asphalt media at different temperatures. The work suggests that temperature can significantly influence the miscibility of lignin polymer in asphalt and that lignin can function as both a modifier and a resin in asphalt.

Investigating the Effect of Chain Extender on the Phase Separation and Mechanical Properties of Polybutadiene-Based Polyurethane.

The thermodynamic incompatibility between the soft and hard segments of thermoplastic polyurethane (TPU) results in a microphase-separated behavior and excellent mechanical properties. However, the effect of the chain extender on the degree of microphase separation (DMS) and the resultant mechanical properties of TPU have not been well studied because of the complex interactions between the soft and hard segments. Herein, hydroxyl-terminated polybutadiene-based TPUs(HTPB-TPUs) without hydrogen bonding between the soft and hard segments are synthesized using hydroxyl-terminated polybutadiene, toluene diisocyanate, and four different chain extenders, and the effect of the chain extender structure on DMS is analyzed experimentally using a combination of analytical techniques. Furthermore, the solubility parameters of the soft and hard segments, glass transition temperatures, and hydrogen-bond density of the HTPB-TPUs, are computed using all-atom molecular dynamics simulations. The results clearly reveal that the chain extender significantly affects the DMS and thus the mechanical properties of HTPB-TPUs. This study paves the way for studying the relationship between the structure and properties of TPU.

Separating Charge Centers of Chain Segments in Dielectric Elastomer through Steric Hindrance Engineering.

Theoretically, separating the positive and negative charge centers of the chain segments of dielectric elastomers (DEs) is a viable alternative to the conventional decoration of chain backbone with polar handles, since it can dramatically increase the dipole vector and hence the dielectric constant (ε') of the DEs while circumvent the undesired impact of the decorated polar handles on the dielectric loss (tan δ). Herein, a novel and universal method is demonstrated to achieve effective separation of the charge centers of chain segments in homogeneous DEs by steric hindrance engineering, i.e., by incorporating a series of different included angle-containing building blocks into the networks. Both experimental and simulation results have shown that the introduction of these building blocks can create a spatially fixed included angle between two adjacent chain segments, thus separating the charge center of the associated region. Accordingly, incorporating a minimal amount of these building blocks (≈5 mol%) can lead to a considerably sharp increase (≈50%) in the ε' of the DEs while maintaining an extremely low tan δ (≈0.006@1 kHz), indicating that this methodology can substantially optimize the dielectric performance of DEs based on a completely different mechanism from the established methods.

Tissue distribution of emerging per- and polyfluoroalkyl substances in wild fish species from Qiantang river, east China: Comparison of 6:2 Cl-PFESA with PFOS.

This study argued for the first time that 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) and perfluorooctanesulfonic acid (PFOS) might have different tissue distribution mechanisms in wild fish species. Nine emerging and legacy per- and polyfluoroalkyl substances (PFASs) were detected in the water and wild fish tissues samples collected from the Qiantang River. Perfluorooctanoic acid (213 ng/L) was the predominant PFAS contaminant, and the other contaminants included perfluorohexanoate (19 ng/L), perfluorobutanoate (199 ng/L) and hexafuoropropylene oxide dimer acid (55 ng/L), which are the main fluorinated alternatives used in various industries located along the Qiantang River. Furthermore, PFOS (742 ng/g) and 6:2 Cl-PFESA (9.0 ng/g) were the predominant PFAS contaminants detected in the fish tissue samples. The differences in the potential molecular mechanism of the tissue distribution of PFOS and 6:2 Cl-PFESA in wild fish species are discussed. Additionally, we hypothesize that phospholipid partitioning is the primary mechanism underlying the tissue distribution of PFOS, and that a specific protein-binding mechanism is involved in the tissue distribution of 6:2 Cl-PFESA.

Multi-joint Assessment of Proprioception Impairments Poststroke.

OBJECTIVES: To investigate shoulder, elbow and wrist proprioception impairment poststroke. DESIGN: Proprioceptive acuity in terms of the threshold detection to passive motion at the shoulder, elbow and wrist joints was evaluated using an exoskeleton robot to the individual joints slowly in either inward or outward direction. SETTING: A university research laboratory. PARTICIPANTS: Seventeen stroke survivors and 17 healthy controls (N=34). Inclusion criteria of stroke survivors were (1) a single stroke; (2) stroke duration <1 year; and (3) cognitive ability to follow simple instructions. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Threshold detection to passive motion and detection error at the shoulder, elbow and wrist. RESULTS: There was significant impairment of proprioceptive acuity in stroke survivors as compared to healthy group at all 3 joints and in both the inward (shoulder horizontal adduction, elbow and wrist flexion, P<.01) and outward (P<.01) motion. Furthermore, the distal wrist joint showed more severe impairment in proprioception than the proximal shoulder and elbow joints poststroke (P<.01) in inward motion. Stroke survivors showed significantly larger detection error in identifying the individual joint in motion (P<.01) and the movement direction (P<.01) as compared to the healthy group. There were significant correlations among the proprioception acuity across the shoulder, elbow and wrist joints and 2 movement directions poststroke. CONCLUSIONS: There were significant proprioceptive sensory impairments across the shoulder, elbow and wrist joints poststroke, especially at the distal wrist joint. Accurate evaluations of multi-joint proprioception deficit may help guide more focused rehabilitation.

Albumin-to-D-dimer ratios: A novel prognostic factor for evaluating first-line chemotherapy efficacy in advanced lung adenocarcinoma patients.

The prognosis of advanced lung adenocarcinoma (LUAD) remains unfavorable, with chemotherapy constituting a primary treatment modality. Discerning the efficacy of chemotherapy for advanced LUAD is imperative. Prior investigations have demonstrated the prognostic value of albumin and D-dimer individually for malignancies; however, the predictive capacity of albumin-to-D-dimer ratios (ADR) for advanced LUAD subjected to first-line platinum-based chemotherapy remains unexplored. A cohort of 313 patients with advanced LUAD was retrospectively examined in this study, spanning from January 2017 to January 2021. ADR threshold values were ascertained via receiver operating characteristic analysis, followed by the evaluation of the association between pretreatment ADR and clinicopathological characteristics, disease control rate (DCR), and overall response rate (ORR) pertinent to first-line chemotherapy. Prognostic factors for progression-free survival (PFS) were determined employing Cox univariate and multivariate analyses. Subsequently, survival data were illustrated utilizing the Kaplan-Meier method and scrutinized through the log-rank test across the entire and subgroup populations. ADR demonstrated a superior area under the curve (AUC) value relative to albumin and D-dimer individually and exhibited enhanced prognostic predictive capability compared to albumin-to-fibrinogen ratios (AFR) for advanced LUAD (AUC: 0.805 vs. 0.640, DeLong test: p<0.001). ADR yielded a cut-off value of 16.608. A greater proportion of non-smokers was observed within the high-ADR group (ADR>16.608) compared to the low-ADR group (ADR≤16.608). Patients in the high-ADR group displayed elevated BMI and Na+ levels and reduced neutrophil count, monocyte count, globulin, and alkaline phosphatase (all p<0.05). Notably, the high-ADR group exhibited heightened DCR (96.7% vs. 89.2%, p=0.008) and ORR rates (70.1% vs. 51.0%, p=0.001) relative to the low-ADR group. Multivariate analysis outcomes indicated that high ADR constituted an independent risk factor for PFS (hazard ratio: 0.24, p<0.001). Furthermore, patients in the high-ADR cohort displayed a significantly prolonged median PFS (254 vs. 142 days, p<0.0001) compared to their low-ADR counterparts. In subpopulations exhibiting favorable implications for PFS, as determined by multivariate analysis, high-ADR patients consistently demonstrated extended PFS durations relative to the low-ADR group (all p<0.0001). Collectively, our findings suggest that ADR constitutes a novel and promising prognostic indicator for advanced LUAD patients, surpassing the accuracy of albumin and D-dimer individually and AFR. ADR thus serves as a potent instrument for assessing treatment effects and PFS in advanced LUAD patients undergoing first-line chemotherapy.

Biomechanical evaluation of different oblique lumbar interbody fusion constructs: a finite element analysis.

BACKGROUND: Finite element analysis (FEA) was performed to investigate the biomechanical differences between different adjunct fixation methods for oblique lumbar interbody fusion (OLIF) and to further analyze its effect on adjacent segmental degeneration. METHODS: We built a single-segment (Si-segment) finite element model (FEM) for L4-5 and a double-segment (Do-segment) FEM for L3-5. Each complete FEM was supplemented and modified, and both developed two surgical models of OLIF with assisted internal fixation. They were OLIF with posterior bilateral percutaneous pedicle screw (TINA system) fixation (OLIF + BPS) and OLIF with lateral plate system (OLIF + LPS). The range of motion (ROM) and displacement of the vertebral body, cage stress, adjacent segment disc stress, and spinal ligament tension were recorded for the four models during flexion/extension, right/left bending, and right/left rotation by applying follower load. RESULTS: For the BPS and LPS systems in the six postures of flexion, extension, right/left bending, and right/left rotation, the ROM of L4 in the Si-segment FEM were 0.32°/1.83°, 0.33°/1.34°, 0.23°/0.47°, 0.24°/0.45°, 0.33°/0.79°, and 0.34°/0.62°; the ROM of L4 in the Do-segment FEM were 0.39°/2.00°, 0.37°/1.38°, 0.23°/0.47°, 0.21°/0.44°, 0.33°/0.57°, and 0.31°/0.62°, and the ROM of L3 in the Do-segment FEM were 6.03°/7.31°, 2.52°/3.50°, 4.21°/4.38°, 4.21°/4.42°, 2.09°/2.32°, and 2.07°/2.43°. BPS system had less vertebral displacement, less cage maximum stress, and less spinal ligament tension in Si/Do-segment FEM relative to the LPS system. BPS system had a smaller upper adjacent vertebral ROM, greater intervertebral disc stress in terms of left and right bending as well as left and right rotation compared to the LPS system in the L3-4 of the Do-segment FEM. There was little biomechanical difference between the same fixation system in the Si/Do-segment FEM. CONCLUSIONS: Our finite element analysis showed that compared to OLIF + LPS, OLIF + BPS (TINA) is more effective in reducing interbody stress and spinal ligament tension, and it better maintains the stability of the target segment and provides a better fusion environment to resist cage subsidence. However, OLIF + BPS (TINA) may be more likely to cause adjacent segment degeneration than OLIF + LPS.

The Implementation and Effectiveness of Progressive Rehabilitation Nursing on Quality of Life, Self-Care Ability, and Psychological Status in Patients with Breast Cancer after Modified Radical Mastectomy.

Objective: To evaluate the implementation and effectiveness of progressive rehabilitation nursing in patients undergoing modified radical mastectomy for breast cancer. Methods: A total of 70 patients undergoing modified radical mastectomy for breast cancer in our hospital were selected as the research subjects, and they were randomly divided into a control group and an observation group, with 35 patients in each group. The control group received routine rehabilitation nursing intervention after surgery, while the observation group received progressive rehabilitation nursing intervention based on the control group's nursing. The quality of life, self-care ability, mental state, and incidence of complications were compared between the two groups. Results: Before the intervention, the two groups had no significant difference in the quality of life (P > .05). After the intervention, the quality of life in the observation group was significantly better than that in the control group (P < .05). Before the intervention, the two groups had no significant difference in the self-care ability (P > .05). After the intervention, the self-care ability in the observation group was significantly better than that in the control group (P < .05). Before the intervention, the two groups had no significant difference in the SAS and SDS scores (P > .05). After the intervention, the SAS and SDS scores in the observation group were significantly lower than those in the control group (P < .05). The incidence of complications in the control group was 22.86%, while that in the observation group was 5.71%. The incidence of complications in the observation group was significantly lower than in the control group (P < .05). Conclusion: Compared with routine nursing intervention, the implementation of progressive rehabilitation nursing intervention can further improve the quality of life, self-care ability, and mental state of patients undergoing modified radical mastectomy for breast cancer and reduce the risk of related complications, which helps promote the recovery process of patients and is worthy of clinical promotion and application.

Distribution of mercury and methylmercury in aquacultured fish in special waters formed by coal mining subsidence.

In China, fence net aquaculture practices have been established in some subsidence waters that have been formed in coal mining subsidence areas. Within this dynamic ecological context, diverse fish species grow continuously until being harvested at the culmination of their production cycle. The purpose of this study was to investigate diverse factors influencing the bioavailability and distribution of mercury (Hg) and methylmercury (MeHg), which have high physiological toxicity in fish, in the Guqiao coal mining subsidence area in Huainan, China. Mercury and MeHg were analyzed in 38 fish samples of eight species using direct mercury analysis (DMA-80) and gas chromatography-cold vapor atomic fluorescence spectrometry (GC-CVAFAS). The analysis results show that the ranges of Hg and MeHg content and methylation rate in the fish were 7.84-85.18 ng/g, 0.52-3.52 ng/g, and 0.81-42.68 %, respectively. Meanwhile, conclusions are also summarized as following: (1) Monophagous herbivorous fish that were fed continuously in fence net aquaculture areas had higher MeHg levels and mercury methylation rates than carnivorous fish. Hg and MeHg contents were affected by different feeding habits of fish. (2) Bottom-dwelling fish show higher MeHg levels, and habitat selection in terms of water depth also partially affected the MeHg content of fish. (3) The effect of fence net aquaculture on methylation of fish in subsidence water is mainly from feed and mercury-containing bottom sediments. However, a time-lag is observed in the physiological response of benthic fishes to the release of Hg from sediments. Our findings provides baseline reference data for the ecological impact of fence net aquaculture in waters affected by soil subsidence induced by coal mining in China. Prevalent environmental contaminants within coal mining locales, notably Hg, may infiltrate rain-induced subsidence waters through various pathways.

ON-OFF Control of Marangoni Self-propulsion via A Supra-amphiphile Fuel and Switch.

Marangoni self-propulsion refers to motion of liquid or solid driven by a surface tension gradient, and has applications in soft robots/devices, cargo delivery, self-assembly etc. However, two problems remain to be addressed for motion control (e.g., ON-OFF) with conventional surfactants as Marangoni fuel: (1) limited motion lifetime due to saturated interfacial adsorption of surfactants; (2) in- situ motion stop is difficult once Marangoni flows are triggered. Instead of covalent surfactants, supra-amphiphiles with hydrophilic and hydrophobic parts linked noncovalently, hold promise to solve these problems owing to its dynamic and reversible surface activity responsively. Here, we propose a new concept of 'supra-amphiphile fuel and switch' based on the facile synthesis of disodium-4-azobenzene-amino-1,3-benzenedisulfonate (DABS) linked by a Schiff base, which has amphiphilicity for self-propulsion, hydrolyzes timely to avoid saturated adsorption, and provides pH-responsive control over ON-OFF motion. The self-propulsion lifetime is extended by 50-fold with DABS and motion control is achieved. The mechanism is revealed with coupled interface chemistry involving two competitive processes of interfacial adsorption and hydrolysis of DABS based on both experiments and simulation. The concept of 'supra-amphiphile fuel and switch' provides an active solution to prolong and control Marangoni self-propulsive devices for the advance of intelligent material systems.