High-quality semiconductor fibres via mechanical design.

Recent breakthroughs in fibre technology have enabled the assembly of functional materials with intimate interfaces into a single fibre with specific geometries1-11, delivering diverse functionalities over a large area, for example, serving as sensors, actuators, energy harvesting and storage, display, and healthcare apparatus12-17. As semiconductors are the critical component that governs device performance, the selection, control and engineering of semiconductors inside fibres are the key pathways to enabling high-performance functional fibres. However, owing to stress development and capillary instability in the high-yield fibre thermal drawing, both cracks and deformations in the semiconductor cores considerably affect the performance of these fibres. Here we report a mechanical design to achieve ultralong, fracture-free and perturbation-free semiconductor fibres, guided by a study on stress development and capillary instability at three stages of the fibre formation: the viscous flow, the core crystallization and the subsequent cooling stage. Then, the exposed semiconductor wires can be integrated into a single flexible fibre with well-defined interfaces with metal electrodes, thereby achieving optoelectronic fibres and large-scale optoelectronic fabrics. This work provides fundamental insights into extreme mechanics and fluid dynamics with geometries that are inaccessible in traditional platforms, essentially addressing the increasing demand for flexible and wearable optoelectronics.

Intuition-and-Tactile Bimodal Sensing Based on Artificial-Intelligence-Motivated All-Fabric Bionic Electronic Skin for Intelligent Material Perception.

Developing electronic skins (e-skins) with extraordinary perception through bionic strategies has far-reaching significance for the intellectualization of robot skins. Here, an artificial intelligence (AI)-motivated all-fabric bionic (AFB) e-skin is proposed, where the overall structure is inspired by the interlocked bionics of the epidermis-dermis interface inside the skin, while the structural design inspiration of the dielectric layer derives from the branch-needle structure of conifers. More importantly, AFB e-skin achieves intuition sensing in proximity mode and tactile sensing in pressure mode based on the fringing and iontronic effects, respectively, and is simulated and verified through COMSOL finite element analysis. The proposed AFB e-skin in pressure mode exhibits maximum sensitivity of 15.06 kPa-1 (<50 kPa), linear sensitivity of 6.06 kPa-1 (50-200 kPa), and fast response/recovery time of 5.6 ms (40 kPa). By integrating AFB e-skin with AI algorithm, and with the support of material inference mechanisms based on dielectric constant and softness/hardness, an intelligent material perception system capable of recognizing nine materials with indistinguishable surfaces within one proximity-pressure cycle is established, demonstrating abilities that surpass human perception.

Highly Conductive and Stable Composite Polymer Electrolyte with Boron Nitride Nanotubes for All-Solid-State Lithium Metal Batteries.

All-solid-state lithium metal batteries (ASSLMBs) have emerged as the most promising next-generation energy storage devices. However, the unsatisfactory ionic conductivity of solid electrolytes at room temperature has impeded the advancement of solid-state batteries. In this work, a multifunctional composite solid electrolyte (CSE) is developed by incorporating boron nitride nanotubes (BNNTs) into polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP). BNNTs, with a high aspect ratio, trigger the dissociation of Li salts, thus generating a greater population of mobile Li+, and establishing long-distance Li+ transport pathways. PVDF-HFP/BNNT exhibits a high ionic conductivity of 8.0 × 10-4 S cm-1 at room temperature and a Li+ transference number of 0.60. Moreover, a Li//Li symmetric cell based on PVDF-HFP/BNNT demonstrates robust cyclic performance for 3400 h at a current density of 0.2 mA cm-2. The ASSLMB formed from the assembly of PVDF-HFP/BNNT with LiFePO4 and Li exhibits a capacity retention of 93.2% after 850 cycles at 0.5C and 25 °C. The high-voltage all-solid-state LiCoO2/Li cell based on PVDF-HFP/BNNT also exhibits excellent cyclic performance, maintaining a capacity retention of 96.4% after 400 cycles at 1C and 25 °C. Furthermore, the introduction of BNNTs is shown to enhance the thermal conductivity and flame retardancy of the CSE.

Freestanding Metal-Organic Frameworks and Their Derivatives: An Emerging Platform for Electrochemical Energy Storage and Conversion.

Metal-organic frameworks (MOFs) have recently emerged as ideal electrode materials and precursors for electrochemical energy storage and conversion (EESC) owing to their large specific surface areas, highly tunable porosities, abundant active sites, and diversified choices of metal nodes and organic linkers. Both MOF-based and MOF-derived materials in powder form have been widely investigated in relation to their synthesis methods, structure and morphology controls, and performance advantages in targeted applications. However, to engage them for energy applications, both binders and additives would be required to form postprocessed electrodes, fundamentally eliminating some of the active sites and thus degrading the superior effects of the MOF-based/derived materials. The advancement of freestanding electrodes provides a new promising platform for MOF-based/derived materials in EESC thanks to their apparent merits, including fast electron/charge transmission and seamless contact between active materials and current collectors. Benefiting from the synergistic effect of freestanding structures and MOF-based/derived materials, outstanding electrochemical performance in EESC can be achieved, stimulating the increasing enthusiasm in recent years. This review provides a timely and comprehensive overview on the structural features and fabrication techniques of freestanding MOF-based/derived electrodes. Then, the latest advances in freestanding MOF-based/derived electrodes are summarized from electrochemical energy storage devices to electrocatalysis. Finally, insights into the currently faced challenges and further perspectives on these feasible solutions of freestanding MOF-based/derived electrodes for EESC are discussed, aiming at providing a new set of guidance to promote their further development in scale-up production and commercial applications.

High-Sensitivity Self-Powered Photodetector Fibers Using Hierarchical Heterojunction Photoelectrodes Enable Wearable Amphibious Optoelectronic Textiles.

Fiber-shaped photodetectors (FPDs) with multidirectional light absorption properties offer exciting opportunities for intelligent optoelectronic textiles. However, achieving FPDs capable of working in ampule environments, especially with high sensitivity, remains a fundamental challenge. Here, quasi-solid-state twisted-fiber photoelectrochemical photodetectors (FPPDs) consisting of photoanode, gel electrolyte, and counter electrode are successfully assembled. In situ decorated n-type one-dimensional (1D) TiO2 nanowire arrays with 2D Ni-Fe metal-organic framework (NiFeMOF) nanosheets serve as hierarchical heterojunction photoanodes, thereby optimizing carrier transfer dynamics at the photoanode/electrolyte interface. As expected, the resulting self-powered FPPD exhibits 88.6 mA W-1 high responsiveness and a < 30 ms fast response time. Significantly, our FPPD can operate in both terrestrial and aquatic environments thanks to its intrinsic ionic properties, making it a versatile tool for detecting ultraviolet light on land and facilitating optical communication underwater. These high-sensitivity self-powered FPPDs with hierarchical heterojunction photoelectrodes hold promise for the development of wearable amphibious optoelectronic textiles.

Flexible Tactile Sensor Based on Patterned Ag-Nanofiber Electrodes through Electrospinning.

The growing demand for intelligent equipment has greatly inspired the development of flexible devices. Thus, disparate flexible multifunctional devices, including pressure sensitive flexible/stretchable displays, have drawn worldwide research attention. Electrodes maintaining conductivity and mechanical strength against deformations are indispensable components in all prospective applications. In this work, a flexible pressure mapping sensor array is developed based on patterned Ag-nanofibers (Ag-NFs) electrode through electrospinning and lithography. The metallic Ag layer is sputtered onto the electrospinning polyvinyl alcohol (PVA) NFs. A uniform and super conductive electrode layer with outstanding mechanical performance is thus formed after dissolving PVA. Followed by the traditional lithography method, a patterned electrode array (4 × 4 sensors) is obtained. Based on the newly developed triboelectric nanogenerator (TENG) technology, a flexible pressure-mapping sensor with excellent stability towards bending deformations is further demonstrated. Moreover, a letter "Z" is successfully visualized by this pressure sensor array, encouraging more human-machine interactive implementations, such as multi-functional tactile screens.

Flexible and High-Voltage Coaxial-Fiber Aqueous Rechargeable Zinc-Ion Battery.

Extensive efforts have been devoted to construct a fiber-shaped energy-storage device to fulfill the increasing demand for power consumption of textile-based wearable electronics. Despite the myriad of available material selections and device architectures, it is still fundamentally challenging to develop eco-friendly fiber-shaped aqueous rechargeable batteries (FARBs) on a single-fiber architecture with high energy density and long-term stability. Here, we demonstrate flexible and high-voltage coaxial-fiber aqueous rechargeable zinc-ion batteries (CARZIBs). By utilizing a novel spherical zinc hexacyanoferrate with prominent electrochemical performance as cathode material, the assembled CARZIB offers a large capacity of 100.2 mAh cm-3 and a high energy density of 195.39 mWh cm-3, outperforming the state-of-the-art FARBs. Moreover, the resulting CARZIB delivers outstanding flexibility with the capacity retention of 93.2% after bending 3000 times. Last, high operating voltage and output current are achieved by the serial and parallel connection of CARZIBs woven into the flexible textile to power high-energy-consuming devices. Thus, this work provides proof-of-concept design for next-generation wearable energy-storage devices.

Conversion Synthesis of Self-Standing Potassium Zinc Hexacyanoferrate Arrays as Cathodes for High-Voltage Flexible Aqueous Rechargeable Sodium-Ion Batteries.

Prussian blue analogs exhibit great promise for applications in aqueous rechargeable sodium-ion batteries (ARSIBs) due to their unique open framework and well-defined discharge voltage plateau. However, traditional coprecipitation methods cannot prepare self-standing electrodes to meet the needs of wearable energy storage devices. In this work, a water bath method is reported to grow microcube-like K2 Zn3 (Fe(CN)6 )2 ·9H2 O on carbon cloth (CC) using Zn nanosheet arrays as the zinc source and reducing agent, directly serving as a self-standing cathode. Benefiting from fast ion diffusion and high conductivity, the cathode delivers a high areal capacity of 0.76 mAh cm-2 at 0.5 mA cm-2 and excellent capacity retention of 57.9% as the current density increases to 20 mA cm-2 . By coupling with NaTi2 (PO4 )3 grown on CC as an anode, a quasi-solid-state flexible ARSIB with a high output voltage plateau of 1.6 V is successfully assembled, exhibiting a superior areal capacity of 0.56 mAh cm-2 and energy density of 0.92 mWh cm-2 . In particular, the device shows admirable mechanical flexibility, maintaining 90.3% of initial capacity after 3000 bending cycles. This work is anticipated to open a new avenue for the rational design of self-standing electrodes used in high-voltage flexible ARSIBs.

Constructing Ultrahigh-Capacity Zinc-Nickel-Cobalt Oxide@Ni(OH)2 Core-Shell Nanowire Arrays for High-Performance Coaxial Fiber-Shaped Asymmetric Supercapacitors.

Increased efforts have recently been devoted to developing high-energy-density flexible supercapacitors for their practical applications in portable and wearable electronics. Although high operating voltages have been achieved in fiber-shaped asymmetric supercapacitors (FASCs), low specific capacitance still restricts the further enhancement of their energy density. This article specifies a facile and cost-effective method to directly grow three-dimensionally well-aligned zinc-nickel-cobalt oxide (ZNCO)@Ni(OH)2 nanowire arrays (NWAs) on a carbon nanotube fiber (CNTF) with an ultrahigh specific capacitance of 2847.5 F/cm3 (10.678 F/cm2) at a current density of 1 mA/cm2, These levels are approximately five times higher than those of ZNCO NWAs/CNTF electrodes (2.10 F/cm2) and four times higher than Ni(OH)2/CNTF electrodes (2.55 F/cm2). Benefiting from their unique features, we successfully fabricated a prototype coaxial FASC (CFASC) with a maximum operating voltage of 1.6 V, which was assembled by adopting ZNCO@Ni(OH)2 NWAs/CNTF as the core electrode and a thin layer of carbon coated vanadium nitride (VN@C) NWAs on a carbon nanotube strip (CNTS) as the outer electrode with KOH poly(vinyl alcohol) (PVA) as the gel electrolyte. A high specific capacitance of 94.67 F/cm3 (573.75 mF/cm2) and an exceptional energy density of 33.66 mWh/cm3 (204.02 µWh/cm2) were achieved for our CFASC device, which represent the highest levels of fiber-shaped supercapacitors to date. More importantly, the fiber-shaped ZnO-based photodetector is powered by the integrated CFASC, and it demonstrates excellent sensitivity in detecting UV light. Thus, this work paves the way to the construction of ultrahigh-capacity electrode materials for next-generation wearable energy-storage devices.

Wrapping Aligned Carbon Nanotube Composite Sheets around Vanadium Nitride Nanowire Arrays for Asymmetric Coaxial Fiber-Shaped Supercapacitors with Ultrahigh Energy Density.

The emergence of fiber-shaped supercapacitors (FSSs) has led to a revolution in portable and wearable electronic devices. However, obtaining high energy density FSSs for practical applications is still a key challenge. This article exhibits a facile and effective approach to directly grow well-aligned three-dimensional vanadium nitride (VN) nanowire arrays (NWAs) on carbon nanotube (CNT) fiber with an ultrahigh specific capacitance of 715 mF/cm2 in a three-electrode system. Benefiting from their intriguing structural features, we successfully fabricated a prototype asymmetric coaxial FSS (ACFSS) with a maximum operating voltage of 1.8 V. From core to shell, this ACFSS consists of a CNT fiber core coated with VN@C NWAs as the negative electrode, Na2SO4 poly(vinyl alcohol) (PVA) as the solid electrolyte, and MnO2/conducting polymer/CNT sheets as the positive electrode. The novel coaxial architecture not only fully enables utilization of the effective surface area and decreases the contact resistance between the two electrodes but also, more importantly, provides a short pathway for the ultrafast transport of axial electrons and ions. The electrochemical results show that the optimized ACFSS exhibits a remarkable specific capacitance of 213.5 mF/cm2 and an exceptional energy density of 96.07 µWh/cm2, the highest areal capacitance and areal energy density yet reported in FSSs. Furthermore, the device possesses excellent flexibility in that its capacitance retention reaches 96.8% after bending 5000 times, which further allows it to be woven into flexible electronic clothes with conventional weaving techniques. Therefore, the asymmetric coaxial architectural design allows new opportunities to fabricate high-performance flexible FSSs for future portable and wearable electronic devices.

In Situ Polymer Gel Electrolyte in Boosting Scalable Fibre Lithium Battery Applications.

The poor interfacial stability not only deteriorates fibre lithium-ion batteries (FLBs) performance but also impacts their scalable applications. To efficiently address these challenges, Prof. Huisheng Peng team proposed a generalized channel structures strategy with optimized in situ polymerization technology in their recent study. The resultant FLBs can be woven into different-sized powering textiles, providing a high energy density output of 128 Wh kg-1 and simultaneously demonstrating good durability even under harsh conditions. Such a promising strategy expands the horizon in developing FLB with particular polymer gel electrolytes, and significantly ever-deepening understanding of the scaled wearable energy textile system toward a sustainable future.

Self-Healable Multifunctional Fibers via Thermal Drawing.

The development of soft electronics and soft fiber devices has significantly advanced flexible and wearable technology. However, they still face the risk of damage when exposed to sharp objects in real-life applications. Taking inspiration from nature, self-healable materials that can restore their physical properties after external damage offer a solution to this problem. Nevertheless, large-scale production of self-healable fibers is currently constrained. To address this limitation, this study leverages the thermal drawing technique to create elastic and stretchable self-healable thermoplastic polyurethane (STPU) fibers, enabling cost-effective mass production of such functional fibers. Furthermore, despite substantial research into the mechanisms of self-healable materials, quantifying their healing speed and time poses a persistent challenge. Thus, transmission spectra are employed as a monitoring tool to observe the real-time self-healing process, facilitating an in-depth investigation into the healing kinetics and efficiency. The versatility of the fabricated self-healable fiber extends to its ability to be doped with a wide range of functional materials, including dye molecules and magnetic microparticles, which enables modular assembly to develop distributed strain sensors and soft actuators. These achievements highlight the potential applications of self-healable fibers that seamlessly integrate with daily lives and open up new possibilities in various industries.

Emerging Amorphous to Crystalline Conversion Chemistry in Ca-Doped VO2 Cathodes for High-Capacity and Long-Term Wearable Aqueous Zinc-Ion Batteries.

Amorphous transition metal oxides have attracted significant attention in energy storage devices owing to their potentially desirable electrochemical properties caused by abundant unsaturated dangling bonds. However, the amorphization further amplifies the shortcoming of the poor intrinsic electronic conductivity of the metal oxides, resulting in unsatisfying rate capability and power density. Herein, freestanding amorphous Ca-doped V2 O5 (a-Ca-V2 O5 ) cathodes are successfully prepared via in situ electrochemical oxidation of Ca-doped VO2 nanoarrays for wearable aqueous zinc-ion batteries. The doping of Ca and construction of freestanding structure effectively uncover the potential of amorphous V2 O5 , which can make full use of the abundant active sites for high volumetric capacity and simultaneously achieve fast reaction kinetics for excellent rate performance. More importantly, the introduction of Ca can notably reduce the formation energy of VO2 according to theoretical calculation results and realizes amorphous to crystalline reversible conversion chemistry in the charge/discharge procedure, thereby facilitating the reversible capacity of the newly developed a-Ca-V2 O5 . This work provides an innovative design strategy to construct high-rate capacity amorphous metal oxides as freestanding electrodes for low-cost and high-safe wearable energy-storage technology.

In Situ Self-Reconfiguration Induced Multifunctional Triple-Gradient Artificial Interfacial Layer toward Long-Life Zn-Metal Anodes.

Aqueous Zn-ion batteries featuring with intrinsic safety and low cost are highly desirable for large-scale energy storage, but the unstable Zn-metal anode resulting from uncontrollable dendrite growth and grievous hydrogen evolution reaction (HER) shortens their cycle life. Herein, a feasible in situ self-reconfiguration strategy is developed to generate triple-gradient poly(diallyldimethylammonium) bis(trifluoromethanesulfonyl)imide (PDDA-TFSI)-Zn5(OH)8Cl2·H2O-Sn (PT-ZHC-Sn) artificial layer. The resulting triple-gradient interface consists of the spherical top layer PT with cation confinement and H2O inhibition, the dense intermediate layer ZHC nanosheet with Zn2+ conduction and electron shielding, and the bottom layer Znophilic Sn metal. The well-designed triple-gradient artificial interfacial layer synergistically facilitates rapid Zn2+ diffusion to regulate uniform Zn deposition and accelerates the desolvation process while suppressing HER. Consequently, the PT-ZHC-Sn@Zn symmetric cell achieves an ultralong lifespan over 6500 h at 0.5 mA cm-2 for 0.5 mAh cm-2. Furthermore, a full battery coupling with MnO2 cathode exhibits a 17.2% increase in capacity retention compared with bare Zn anode after 1000 cycles. The in situ self-reconfiguration strategy is also applied to prepare triple-gradient PT-ZHC-In, and the assembled Zn//Cu cell operates steadily for over 8400 h while maintaining Coulombic efficiency of 99.6%. This work paves the way to designing multicomponent gradient interface for stable Zn-metal anodes.

Stretchable and Self-Powered Mechanoluminescent Triboelectric Nanogenerator Fibers toward Wearable Amphibious Electro-Optical Sensor Textiles.

Flexible electro-optical dual-mode sensor fibers with capability of the perceiving and converting mechanical stimuli into digital-visual signals show good prospects in smart human-machine interaction interfaces. However, heavy mass, low stretchability, and lack of non-contact sensing function seriously impede their practical application in wearable electronics. To address these challenges, a stretchable and self-powered mechanoluminescent triboelectric nanogenerator fiber (MLTENGF) based on lightweight carbon nanotube fiber is successfully constructed. Taking advantage of their mechanoluminescent-triboelectric synergistic effect, the well-designed MLTENGF delivers an excellent enhancement electrical signal of 200% and an evident optical signal whether on land or underwater. More encouragingly, the MLTENGF device possesses outstanding stability with almost unchanged sensitivity after stretching for 200%. Furthermore, an extraordinary non-contact sensing capability with a detection distance of up to 35 cm is achieved for the MLTENGF. As application demonstrations, MLTENGFs can be used for home security monitoring, intelligent zither, traffic vehicle collision avoidance, and underwater communication. Thus, this work accelerates the development of wearable electro-optical textile electronics for smart human-machine interaction interfaces.

A synchronous-twisting method to realize radial scalability in fibrous energy storage devices.

For wearable electronics, radial scalability is one of the key research areas for fibrous energy storage devices to be commercialized, but this field has been shelved for years due to the lack of effective methods and configuration arrangements. Here, the team presents a generalizable strategy to realize radial scalability by applying a synchronous-twisting method (STM) for synthesizing a coaxial-extensible configuration (CEC). As examples, aqueous fiber-shaped Zn-MnO2 batteries and MoS2-MnO2 supercapacitors with a diameter of ~500 µm and a length of 100 cm were made. Because of the radial scalability, uniform current distribution, and stable binding force in CEC, the devices not only have high energy densities (~316 Wh liter-1 for Zn-MnO2 batteries and ~107 Wh liter-1 for MoS2-MnO2 supercapacitors) but also maintain a stable operational state in textiles when external bending and tensile forces were applied. The fabricating method together with the radial scalability of the devices provides a reference for future fiber-shaped energy storage devices.

High-Fluidity/High-Strength Dual-Layer Gel Electrolytes Enable Ultra-Flexible and Dendrite-Free Fiber-Shaped Aqueous Zinc Metal Battery.

Fiber-shaped aqueous zinc-ion batteries (FAZIBs) with intrinsic safety, highcapacity, and superb omnidirectional flexibility hold promise for wearable energy-supply devices. However, the interfacial separation of fiber-shaped electrodes and electrolytes caused by Zinc (Zn) stripping process and severe Zn dendrites occurring at the folded area under bending condition seriously restricts FAZIBs' practical application. Here, an advanced confinement encapsulation strategy is originally reported to construct dual-layer gel electrolyte consisting of high-fluidity polyvinyl alcohol-Zn acetate inner layer and high-strength Zn alginate outer layer for fiber-shaped Zn anode. Benefiting from the synergistic effect of inner-outer gel electrolyte and the formation of solid electrolyte interphase on Zn anode surface by lysine additive, the resulting fiber-shaped Zn-Zn symmetric cell delivers long cycling life over 800 h at 1 mA cm-2 with dynamic bending frequency of 0.1 Hz. The finite element simulation further confirms that dual-layer gel electrolyte can effectively suppress the interfacial separation arising from the Zn stripping and bending process. More importantly, a robust twisted fiber-shaped Zn/zinc hexacyanoferrate battery based on dual-layer gel electrolyte is successfully assembled, achieving a remarkable capacity retention of 97.7% after bending 500 cycles. Therefore, such novel dual-layer gel electrolyte design paves the way for the development of long-life fiber-shaped aqueous metal batteries.

Free-standing conductive nickel metal-organic framework nanowires as bifunctional electrodes for wearable pressure sensors and Ni-Zn batteries.

Free-standing metal-organic frameworks (MOFs) with controllable structure and good stability are emerging as promising materials for applications in flexible pressure sensors and energy-storage devices. However, the inherent low electrical conductivity of MOF-based materials requires complex preparation processes that involve high-temperature carbonization. This work presents a simple method to grow conductive nickel MOF nanowire arrays on carbon cloth (Ni-CAT@CC) and use Ni-CAT@CC as the functional electrodes for flexible piezoresistive sensor. The resulting sensor is able to monitor human activity, including elbow bending, knee bending, and wrist bending. Besides, the soft-packaged aqueous Ni-Zn battery is assembled with Ni-CAT@CC, a piece of glass microfiber filters, and Zn foil acting as cathode, separator, and anode, respectively. The Ni-Zn battery can be used as a power source for finger pressure monitoring. This work demonstrates free-standing MOF-based nanowires as bifunctional fabric electrodes for wearable electronics.

Integrating High-Sensitivity Photodetector and High-Energy Aqueous Battery in All-in-One Triple-Twisted Fiber.

Fiber-shaped photodetectors (FPDs) have attracted special attention to wearable health monitoring due to their 3D absorption capabilities. However, the practical application of traditional FPDs is severely limited by the irreversible degradation of performance caused by vulnerable interface compatibility on complex deformation and a single function. Here, an integrated photoelectrochemical FPD/battery device (FPDB) is designed, consisting of a common electrode, photoanode, anode, and sol-gel electrolyte as an isolation layer, which not only effectively avoids the short circuit problem of FPD but also endows high-efficiency energy storage capacity. As expected, the resulting all-in-one triple-twisted fiber-shaped FPDB simultaneously achieves high responsiveness of 151.45 mA W-1 and excellent volume capacity of 18.75 mAh cm-3. Such a stable architectural design and multifunctional integration of functional fibers accelerate the development of next-generation wearable fabrics.

Fluorescent Fiber-Shaped Aqueous Zinc-Ion Batteries for Bifunctional Multicolor-Emission/Energy-Storage Textiles.

Wearable smart textiles are natural carriers to enable imperceptible and highly permeable sensing and response to environmental conditions via the system integration of multiple functional fibers. However, the existing massive interfaces between different functional fibers significantly increase the complexity and reduce the wearability of the textile system. Thus, it is significant yet challenging to achieve all-in-one multifunctional fibers for realizing miniaturized and lightweight smart textiles with high reliability. Herein, as bifunctional electrolyte additives, fluorescent carbon dots with abundant zincophilic functional groups are introduced into electrolytes to develop fluorescent fiber-shaped aqueous zinc-ion batteries (FFAZIBs). Originating from effective dendrite suppression of Zn anodes and multiple active sites of freestanding Prussian blue cathodes, high energy density (0.17 Wh·cm-3) and long-term cyclability (78.9% capacity retention after 1500 cycles) are achieved for FFAZIBs. More importantly, the one-dimensional structure ensures the same luminance in all directions of FFAZIBs, enabling the form of multicolor display-in-battery textiles.