Fatty acid binding protein 4 (FABP4) induces chondrocyte degeneration via activation of the NF-κb signaling pathway.

The pathogenesis of osteoarthritis (OA) is still unclear. Fatty acid binding protein 4 (FABP4), a novel adipokine, has been found to play a role in OA. This study aimed to explore the role of NF-κB in FABP4-induced OA. In the in vivo study, four pairs of 12-week-old male FABP4 knockout (KO) and wild-type (WT) mice were included. The activation of NF-κB was assessed. In parallel, 24 6-week-old male C57/Bl6 mice were fed a high-fat diet (HFD) and randomly allocated to four groups: daily oral gavage with (1) PBS solution; (2) QNZ (NF-κB-specific inhibitor, 1 mg/kg/d); (3) BMS309403 (FABP4-specific inhibitor, 30 mg/kg/d); and (4) BMS309403 (30 mg/kg/d) + QNZ (1 mg/kg/d). The diet and treatment were sustained for 4 months. The knee joints were obtained to assess cartilage degradation, NF-κB activation, and subchondral bone sclerosis. In the in vitro study, a mouse chondrogenic cell line (ATDC5) was cultured. FABP4 was supplemented to stimulate chondrocytes, and the activation of NF-κB was investigated. In parallel, QNZ and NF-κB-specific siRNA were used to inhibit NF-κB. In vivo, the FABP4 WT mice had more significant NF-κB activation than the KO mice. Dual inhibition of FABP4 and NF-κB alleviated knee OA in mice. FABP4 has no significant effect on the activation of the JNK signaling pathway. In vitro, FABP4 directly activated NF-κB in chondrocytes. The use of QNZ and NF-κB-siRNA significantly alleviated the expression of catabolic markers of chondrocytes induced by FABP4. FABP4 induces chondrocyte degeneration by activating the NF-κB pathway.

α-MnO2 Cathode with Oxygen Vacancies Accelerated Affinity Electrolyte for Dual-Ion Co-Encapsulated Aqueous Aluminum Ion Batteries.

Aluminum batteries (ABs) are identified as one of the most promising candidates for the next generation of large-scale energy storage elements because of their efficient three-electron reaction. Compared to ionic electrolytes, aqueous aluminum-ion batteries (AAIBs) are considered safer, less costly, and more environmentally friendly. However, considerable cycling performance is a key issue limiting the development of AAIBs. Stable, efficient, and electrolyte-friendly cathodes are most desirable for AAIBs. Herein, a rod-shaped defect-rich α-MnO2 is designed as a cathode, which is capable to deliver high performance with stable cycling for 180 cycles at 500 mA g-1 and maintains a discharge specific capacity of ≈100 mAh g-1. In addition, the infiltrability simulation is effectively utilized to corroborate the rapid electrochemical reaction brought about by the defective mechanism. With the formation of oxygen vacancies, the dual embedding of protons and metal ions is activated. This work provides a brand-new design for the development and characterization of cathodes for AAIBs.

Heterostructures Assembled from Bi2O2CO3 and MXene for Boosted Potassium-Ion Storage by Arousing the Built-in Electric Field.

Bismuth-based materials have been recognized as the appealing anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity. However, the kinetics sluggishness and capacity decline induced by the structure distortion predominately retard their further development. Here, a heterostructure of polyaniline intercalated Bi2O2CO3/MXene (BOC-PA/MXene) hybrids is reported via simple self-assembly strategy. The ingenious design of heterointerface-rich architecture motivates significantly the interior self-built-in electric field (IEF) and high-density electron flow, thus accelerating the charge transfer and boosting ion diffusion. As a result, the hybrids realize a high reversible specific capacity, satisfying rate capability as well as long-term cycling stability. The in/ex situ characterizations further elucidate the stepwise intercalation-conversion-alloying reaction mechanism of BOC-PA/MXene. More encouragingly, the full cell investigation further highlights its competitive merits for practical application in further PIBs. The present work not only opens the way to the design of other electrodes with an appropriate working mechanism but also offers inspiration for built-in electric-field engineering toward high-performance energy storage devices.

Transforming Growth Factor-ß1 Regulates Peroxisomal Genes/Proteins via Smad Signaling in Idiopathic Pulmonary Fibrosis Fibroblasts and Transgenic Mouse Models.

Idiopathic pulmonary fibrosis (IPF) is a chronic human disease with persistent destruction of lung parenchyma. Transforming growth factor-ß1 (TGF-ß1) signaling plays a pivotal role in the initiation and pathogenesis of IPF. As shown herein, TGF-ß1 signaling down-regulated not only peroxisome biogenesis but also the metabolism of these organelles in human IPF fibroblasts. In vitro cell culture observations in human fibroblasts and human lung tissue indicated that peroxisomal biogenesis and metabolic proteins were significantly down-regulated in the lung of 1-month-old transgenic mice expressing a constitutively active TGF-ß type I receptor kinase (ALK5). The peroxisome biogenesis protein peroxisomal membrane protein Pex13p (PEX13p) as well as the peroxisomal lipid metabolic enzyme peroxisomal acyl-coenzyme A oxidase 1 (ACOX1) and antioxidative enzyme catalase were highly up-regulated in TGF-ß type II receptor and Smad3 knockout mice. This study reports a novel mechanism of peroxisome biogenesis and metabolic regulation via TGF-ß1-Smad signaling: interaction of the Smad3 transcription factor with the PEX13 gene in chromatin immunoprecipitation-on-chip assay as well as in a bleomycin-induced pulmonary fibrosis model applied to TGF-ß type II receptor knockout mice. Taken together, data from this study suggest that TGF-ß1 participates in regulation of peroxisomal biogenesis and metabolism via Smad-dependent signaling, opening up novel strategies for the development of therapeutic approaches to inhibit progression of pulmonary fibrosis patients with IPF.

Dynamic imaging of micro-vibrations with an ultra-wide bandwidth and a femtometer noise using switchable pulsed laser interferometry.

Imaging the complex dynamics of micro-vibrations plays a fundamental role in the investigation of microelectromechanical systems (MEMS). However, it remains a challenge for achieving both a wide bandwidth and a low noise due to the high photodetector noise and electromagnetic interference at GHz frequencies. Here, we propose a pulsed laser interferometry system with an adaptable switch to image GHz vibrations based on stroboscopic mixing, while measuring lower-frequency vibrations based on the homodyne scheme. The noise power spectral density is shown in both regions from DC to 10 GHz with an average noise down to 30.8 fm/√Hz at GHz frequencies, which holds the highest resolution to the best of our knowledge. Vibrational amplitude and phase mappings of a kHz comb-drive resonator, a GHz piezoelectric transducer, and a GHz film bulk acoustic resonator are presented with animated visualizations and k-space analysis, paving a new paradigm for the first time to image and analyze various MEMS devices of a bandwidth spanning 10 orders of magnitude.

Sheathless CESI-MS versus LC-MS: Results of qualitative and quantitative analyses of the primary and secondary metabolites of Pleioblastus amarus bamboo shoots.

The bamboo shoot of Pleioblastus amarus (Keng) Keng f. is a medicinal and edible resource in China. In this study, three separation techniques were applied to identify the primary and secondary metabolites component of P. amarus bamboo shoots, including sheathless capillary electrophoresis electrospray ionization-mass spectrometry (CESI-MS), reverse-phase liquid chromatography-MS (RPLC-MS), and hydrophilic interaction liquid chromatography-MS (HILIC-MS). A total of 201 metabolites were identified by the three methods. Among those metabolites, 146 were identified by RPLC-MS, 85 were identified by HILIC-MS, and 46 were identified by sheathless CESI-MS. These methods were complementary and had a linear coefficient. CESI-MS presented advantages in the identification of isomers, high sensitivity, very low sample usage, and good detection of polar and nonpolar metabolites, showing its unique applications in food analysis and prospects in metabolic research.

Association of stress hyperglycemia ratio with in-hospital new-onset atrial fibrillation and long-term outcomes in patients with acute myocardial infarction.

AIMS: To investigate the predictive value and prognostic impact of stress hyperglycemia ratio (SHR) for new-onset atrial fibrillation (NOAF) complicating acute myocardial infarction (AMI). MATERIALS AND METHODS: This retrospective study included 2145 AMI patients without AF history between February 2014 and March 2018. SHR was calculated using fasting blood glucose (mmol/L)/[1.59*HbA1c (%)-2.59]. The association between SHR and post-MI NOAF was assessed with multivariable logistic regression analyses. The primary outcome was a composite of cardiac death, heart failure hospitalisation, recurrent MI, and ischaemic stroke (MACE). Cox regression-adjusted hazard ratios with 95% confidence intervals (CI) were estimated for MACE. RESULTS: A total of 245 (11.4%) patients developed NOAF. In the multivariable logistic regression analyses, SHR (each 10% increase) was significantly associated with increased risks of NOAF in the whole population (OR: 1.05, 95% CI: 1.01-1.10), particularly in non-diabetic individuals (OR:1.08, 95% CI: 1.01-1.17). During a median follow-up of 2.7 years, 370 (18.5%) MACEs were recorded. The optimal cut-off value of SHR for MACE prediction was 1.119. Patients with both high SHR (≥1.119) and NOAF possessed the highest risk of MACE compared to those with neither high SHR nor NOAF after multivariable adjustment (HR: 2.18, 95% CI: 1.39-3.42), especially for diabetics (HR: 2.63, 95% CI: 1.41-4.91). Similar findings were observed using competing-risk models. CONCLUSIONS: SHR is an independent predictor of post-MI NOAF in non-diabetic individuals. Diabetic patients with both high SHR and NOAF had the highest risk of MACE, suggesting that therapies targeting SHR may be considered in these patients. TRIAL REGISTRATION: ClinicalTrials.gov, NCT03533543.

Engineering industrial yeast for improved tolerance and robustness.

As an important cell factory, industrial yeast has been widely used for the production of compounds ranging from bulk chemicals to complex natural products. However, various adverse conditions including toxic products, extreme pH, and hyperosmosis etc., severely restrict microbial growth and metabolic performance, limiting the fermentation efficiency and diminishing its competitiveness. Therefore, enhancing the tolerance and robustness of yeasts is critical to ensure reliable and sustainable production of metabolites in complex industrial production processes. In this review, we provide a comprehensive review of various strategies for improving the tolerance of yeast cells, including random mutagenesis, system metabolic engineering, and material-mediated immobilization cell technology. It is expected that this review will provide a new perspective to realize the response and intelligent regulation of yeast cells to environmental stresses.

Metal-Organic Frameworks-Derived FeS-Co9S8/NCA Porous Aerogel Electrocatalyst as a High-Performance Cathode for Zinc-Air Batteries.

Herein, a novel strategy to establish a porous FeS-Co9S8/carbon aerogel (FeS-Co9S8/NCA) electrocatalyst for oxygen evolution reaction (OER) is fabricated via applying a green biomass carrageenan sulfuration method to CoFe-metal-organic frameworks (MOFs). The FeS-Co9S8/NCA exhibits optimized catalytic activity toward the OER with a lower overpotential of 322 mV, which is overmatched to the majority of transition metal sulfides (TMSs), as well as lifted long-term durability without evident variation in the LSV curves after 3000 cycles. Rechargeable liquid zinc-air battery (ZAB) assembled with FeS-Co9S8/NCA as the OER catalyst indicated a maximum power density of 176 mW cm-2 and superior cycling stability without raised polarization even after 48 h, outperforms commercial RuO2-based ZAB. Furthermore, the flexible solid-state ZAB built with FeS-Co9S8/NCA also demonstrated outdistance properties and bendability. The excellent performance stems from the hierarchical porous aerogel structure, which offers a multiscale mass/electron transport channel, together with the interfacial synergy effect between FeS and Co9S8, which serves as the active site of the OER reaction. Thus, this work instituted a novel strategy for obtaining both clean and efficient transition metal sulfide electrocatalysts for the OER reaction and an environmentally friendly biomass material-based sustainable electrocatalyst.

Oxygen Vacancies Boosted Proton Intercalation Kinetics for Aqueous Aluminum-Manganese Batteries.

Aluminum-ion batteries have garnered an extensive amount of attention due to their superior electrochemical performance, low cost, and high safety. To address the limitation of battery performance, exploring new cathode materials and understanding the reaction mechanism for these batteries are of great significance. Among numerous candidates, multiple structures and valence states make manganese-based oxides the best choice for aqueous aluminum-ion batteries (AAIBs). In this work, a new cathode consists of γ-MnO2 with abundant oxygen vacancies. As a result, the electrode shows a high discharge capacity of 481.9 mAh g-1 at 0.2 A g-1 and a sustained reversible capacity of 128.6 mAh g-1 after 200 cycles at 0.4 A g-1. In particular, through density functional theory calculation and experimental comparison, the role of oxygen vacancies in accelerating the reaction kinetics of H+ has been verified. This study provides insights into the application of manganese dioxide materials in aqueous AAIBs.

Unusual Hybrid Magnesium Storage Mechanism in a New Type of Bi2O2CO3 Anode.

Bismuth and bismuth-based compounds have been extensively studied as anodes as prospective candidates for rechargeable magnesium batteries (rMBs). However, the unsatisfactory magnesium-storage capability caused by the typical alloying reaction mechanism severely restricts the practical option for anodes in rMBs. Herein, polyaniline intercalated Bi2O2CO3 nanosheets are prepared by an effective interlayer engineering strategy to fine-tune the layer structure of Bi2O2CO3, achieving enhanced magnesium-storage capacity, rate performance, as well as long cycle life. Excitedly, a stepwise insertion-conversion-alloying reaction is aroused to stabilize the performance, which is elucidated by in/ex situ investigations. Moreover, first-principles calculations confirm that the coupling of Bi2O2CO3 and polyaniline not only increases the conductivity induced by the strong density of states and the interior self-built-in electric field but also significantly reduces the energy barrier of Mg shuttles. Our findings shed light on exploring new electrode materials with an appropriate working mechanism toward high-performance rechargeable batteries.

Comparative analysis of machine learning methods for prediction of chlorophyll-a in a river with different hydrology characteristics: A case study in Fuchun River, China.

Eutrophication is a serious threat to water quality and human health, and chlorophyll-a (Chla) is a key indicator to represent eutrophication in rivers or lakes. Understanding the spatial-temporal distribution of Chla and its accurate prediction are significant for water system management. In this study, spatial-temporal analysis and correlation analysis were applied to reveal Chla concentration pattern in the Fuchun River, China. Then four exogenous variables (wind speed, water temperature, dissolved oxygen and turbidity) were used for predicting Chla concentrations by six models (3 traditional machine learning models and 3 deep learning models) and compare the performance in a river with different hydrology characteristics. Statistical analysis shown that the Chla concentration in the reservoir river segment was higher than in the natural river segment during August and September, while the dominant algae gradually changed from Cyanophyta to Cryptophyta. Moreover, air temperature, water temperature and dissolved oxygen had high correlations with Chla concentrations among environment factors. The results of the prediction models demonstrate that extreme gradient boosting (XGBoost) and long short-term memory neural network (LSTM) were the best performance model in the reservoir river segment (NSE = 0.93; RMSE = 4.67) and natural river segment (NSE = 0.94; RMSE = 1.84), respectively. This study provides a reference for further understanding eutrophication and early warning of algal blooms in different type of rivers.

Particle size distribution of total suspended sediments in urban stormwater runoff: Effect of land uses, precipitation conditions, and seasonal variations.

Understanding particle size distribution (PSD) of total suspended sediments in urban runoff is essential for pollutant fate and designing effective stormwater treatment measures. However, the PSDs from different land uses under different weather conditions have yet to be sufficiently studied. This research conducted a six-year water sampling program in 15 study sites to analyze the PSD of total suspended sediments in runoff. The results revealed that the median particle size decreased in the order: paved residential, commercial, gravel lane residential, mixed land use, industrial, and roads. Fine particles less than 125 µm are the dominant particles (over 75%) of total suspended sediments in runoff in Calgary, Alberta, Canada. Roads have the largest percentage of particles finer than 32 µm (49%). Gravel lane residential areas have finer particle sizes than paved residential areas. The results of PSD were compared with previous literature to provide more comprehensive information about PSD from different land uses. The impact of rainfall event types can vary depending on land use types. A long antecedent dry period tends to result in the accumulation of fine particles on urban surfaces. High rainfall intensity and long duration can wash off more coarse particles. The PSD in spring exhibits the finest particles, while fall has the largest percentage of coarse particles. Snowmelt particles are finer for the same land use than that during rainfall events because the rainfall-runoff flows are usually larger than the snowmelt flows.

Strategies for the biological synthesis of D-glucuronic acid and its derivatives.

D-glucuronic acid is a kind of glucose derivative, which has excellent properties such as anti-oxidation, treatment of liver disease and hyperlipidemia, and has been widely used in medicine, cosmetics, food and other fields. The traditional production methods of D-glucuronic acid mainly include natural extraction and chemical synthesis, which can no longer meet the growing market demand. The production of D-glucuronic acid by biocatalysis has become a promising alternative method because of its high efficiency and environmental friendliness. This review describes different production methods of D-glucuronic acid, including single enzyme catalysis, multi-enzyme cascade, whole cell catalysis and co-culture, as well as the intervention of some special catalysts. In addition, some feasible enzyme engineering strategies are provided, including the application of enzyme immobilized scaffold, enzyme mutation and high-throughput screening, which provide good ideas for the research of D-glucuronic acid biocatalysis.

Strategies for the efficient biosynthesis of ß-carotene through microbial fermentation.

ß-Carotene is an orange fat-soluble compound, which has been widely used in fields such as food, medicine and cosmetics owing to its anticancer, antioxidant and cardiovascular disease prevention properties. Currently, natural ß-carotene is mainly extracted from plants and algae, which cannot meet the growing market demand, while chemical synthesis of ß-carotene cannot satisfy the pursuit for natural products of consumers. The ß-carotene production through microbial fermentation has become a promising alternative owing to its high efficiency and environmental friendliness. With the rapid development of synthetic biology and in-depth study on the synthesis pathway of ß-carotene, microbial fermentation has shown promising applications in the ß-carotene synthesis. Accordingly, this review aims to summarize the research progress and strategies of natural carotenoid producing strain and metabolic engineering strategies in the heterologous synthesis of ß-carotene by engineered microorganisms. Moreover, it also summarizes the adoption of inexpensive carbon sources to synthesize ß-carotene as well as proposes new strategies that can further improve the ß-carotene production.

Evaluation of fifteen processing methods of hellgrammites based on the flavor characteristics.

To investigate suitable processing methods for improve the flavor while maintaining quality, hellgrammites were subjected to fifteen different processing methods. The samples were tested by sensory evaluation and were analyzed using HS-SPME-GC-MS. The sensory evaluation revealed that five methods for head and chest removal, three wine-fried methods, and three vinegar-roasting methods significantly reduced the levels of hexanal (3129.05 ± 45.77 µg/kg) and heptanal (436.72 ± 7.42 µg/kg), compounds responsible for fishy and earthy flavors, compared to raw samples. The latter two methods exhibited increased aroma flavor. PCA and OPLS-DA analyses suggested that acids, alcohols, and esters played a crucial role in flavor modification. Notably, vinegar-roasting methods demonstrated the highest acid content and had a substantial impact on volatile compounds. Additionally, boiling methods effectively reduced the levels of hazardous compounds, such as toluene and 1,3-Dimethyl-benzene. However, other methods did not exhibit similar efficacy in reducing hazardous compounds. The accumulation of hazardous compounds showed a decreasing trend in the whole insect, head removal, and head and chest removal groups. Moreover, the relative odor activity value consistently identified aldehyde compounds, including hexanal and heptanal, as the main contributors to aroma. Overall, boiling and head and chest removal procedures were suggested as precautionary measures during the initial processing of hellgrammites-based food products. The vinegar-roasting and wine-fried methods could be employed to impart desired flavors, aligning with consumers' preferences. These findings lay the foundation for standardizing processing techniques and ensuring the quality control of products derived from hellgrammites.

A Stretchable and Tough Graphene Film Enabled by Mechanical Bond.

The pursuit of fabricating high-performance graphene films has aroused considerable attention due to their potential for practical applications. However, developing both stretchable and tough graphene films remains a formidable challenge. To address this issue, we herein introduce mechanical bond to comprehensively improve the mechanical properties of graphene films, utilizing [2]rotaxane as the bridging unit. Under external force, the [2]rotaxane cross-link undergoes intramolecular motion, releasing hidden chain and increasing the interlayer slip distance between graphene nanosheets. Compared with graphene films without [2]rotaxane cross-linking, the presence of mechanical bond not only boosted the strength of graphene films (247.3 vs 74.8 MPa) but also markedly promoted the tensile strain (23.6 vs 10.2 %) and toughness (23.9 vs 4.0 MJ/m3). Notably, the achieved tensile strain sets a record high and the toughness surpasses most reported results, rendering the graphene films suitable for applications as flexible electrodes. Even when the films were stretched within a 20 % strain and repeatedly bent vertically, the light-emitting diodes maintained an on-state with little changes in brightness. Additionally, the film electrodes effectively actuated mechanical joints, enabling uninterrupted grasping movements. Therefore, the study holds promise for expanding the application of graphene films and simultaneously inspiring the development of other high-performance two-dimensional films.

TRPV1+ neurons alter Staphylococcus aureus skin infection outcomes by affecting macrophage polarization and neutrophil recruitment.

BACKGROUND: The interaction between the nervous system and the immune system can affect the outcome of a bacterial infection. Staphylococcus aureus skin infection is a common infectious disease, and elucidating the relationship between the nervous system and immune system may help to improve treatment strategies. RESULTS: In this study, we found that the local release of calcitonin gene-related peptide (CGRP) increased during S. aureus skin infection, and S. aureus could promote the release of CGRP from transient receptor potential cation channel subfamily V member 1 (TRPV1+) neurons in vitro. The existence of TRPV1+ neurons inhibited the recruitment of neutrophils to the infected region and regulated the polarization of macrophages toward M2 while inhibiting polarization toward M1. This reduces the level of inflammation in the infected area, which aggravates the local infection. Furthermore, this study demonstrates that TRPV1 may be a target for the treatment of S. aureus skin infections and that botulinum neurotoxin A (BoNT/A) and BIBN4096 may reverse the inhibited inflammatory effect of CGRP, making them potential therapeutics for the treatment of skin infection in S. aureus. CONCLUSIONS: In S. aureus skin infection, TRPV1+ neurons inhibit neutrophil recruitment and regulate macrophage polarization by releasing CGRP. BoNT/A and BIBN4096 may be potential therapeutic agents for S. aureus skin infection.

Bimetallic Organic Framework-Decorated Leaf-like 2D Nanosheets as Flexible Air Cathode for Rechargeable Zn-air Batteries.

Exploring highly active and robust self-supporting air electrodes is the key for flexible Zn-air batteries (FZABs). Therefore, we report a novel 3D structural bimetal-based self-supporting electrode consisting of hybrid Cu, Co nanoparticles co-modified nitrogen-doped carbon nanosheets on carbon cloth (Cu, Co NPs@NCNSs/CC), which displays excellent electrochemical activity and durability of the oxygen reduction/evolution reaction (ORR/OER). The Cu, Co NPs@NCNSs/CC exhibits a half-wave potential of 0.863 V toward ORR and an overpotential of 225 mV at 10 mA cm-2 toward OER, owing to its exposed bimetallic sites accelerating the kinetic reaction. In addition, the density functional theory calculation proves that the synergistic effect of CuCo sites favors ORR and OER. Hence, the FZABs based on Cu, Co NPs@NCNSs/CC achieve a larger open-circuit potential (1.45 V), higher energy density (130.10 mW cm-2 ), and outstanding cycling stability. All remarkable results demonstrate valuable enlightenment for seeking advanced energy materials of portable and wearable electronics.

Investigation of the Sheltering Effects on the Mobilization of Microplastics in Open-Channel Flow.

Microplastics (MPs) can be sheltered by bed grains, resulting in a higher threshold of mobilization compared with those moving on a smooth bed. Only one formula considering the sheltering effects has been proposed for the critical shear stress (τc) of MP mobilization by including the densities and sizes of MPs and bed grains, but it is inaccurate for MPs of certain materials such as PS and shows limitations in understanding the sheltering effects. Additionally, no method exists for the critical depth-averaged velocity (Uc). In this study, experiments were conducted measuring both τc and Uc of MPs (made of PA, PVC, and PET) deposited on rough beds of different roughnesses, with a focus on the sheltering effects. A power law relationship between τc and the density and size of MPs was found, and a new formula for estimating τc was proposed for MPs, which reduced the errors by approximately 40% compared with that of the previous formula (27.8%). To explicitly quantify the sheltering effects in MP mobilizations, hiddenness (ΔZ), exposure (ΔH), and longitudinal exposure (ΔX) were introduced, all of which were observed to follow a normal distribution. A semiempirical method for Uc was then proposed incorporating the new measures, which reduced the errors by around 70% compared to the methods developed for estimating the Uc values of sediments.