Risk factors for gingival invagination: A retrospective study.

AIM: This study aimed to identify the risk factors for gingival invagination during orthodontic treatment after premolar extraction. MATERIALS AND METHODS: The medical records of 135 patients who had undergone interdental space closure after premolar extraction were collected, and cone beam computed tomography was performed to determine the presence of gingival invagination. The risk factors were examined using mixed-effects models and generalized propensity score weighting (GPSW) to develop a predictive model. RESULTS: Univariate analysis revealed that the extraction site, buccal bone thickness 4 mm apical to the cemento-enamel junction (MB1), mid-root buccal bone thickness (MB2) and vertical skeletal relationships were related to gingival invagination (p < .05). Furthermore, a subsequent multivariable mixed-effects model analysis indicated a significantly increased risk of gingival invagination at MB1 < 1 mm (p < .001; odds ratio [ORMB1≤0.5mm] = 29.304; 95% confidence interval [CI]: 8.986-93.807; OR0.5

Effect of storage temperature on the dimensional stability of DLP printed casts.

STATEMENT OF PROBLEM: Despite studies focusing on the accuracy and dimensional stability of additive manufacturing, research on the impact of storage conditions on these properties of 3-dimensional (3D) printed objects is lacking. PURPOSE: The purpose of this in vitro study was to investigate the influence of storage temperature on the dimensional stability of digital light processing (DLP) printed casts and to determine how different locations in printed casts react differently. MATERIAL AND METHODS: A completely dentate maxillary typodont model was digitized with a desktop laser scanner. The typodont was subsequently modified with a software program by adding cuboids with a side length of 3 mm on both maxillary central incisors, first molars, and second molars. The file was saved in the standard tessellation language (STL) format. The modified digitized typodont was then processed through the DLP technology printing process with a desktop DLP printer and photopolymerizing resin. The casts were printed 32 times and stored in sealed plastic bags, shielded from light, and subjected to 4 different temperature conditions (-20 °C, 4 °C, 20 °C, and 37 °C, n=8 each). The cuboids on the central incisors were labeled as the P1 group, first molars as the P2 group, and second molars as the P3 group. The distance between the cuboids was measured 5 times, with results recorded immediately after cast production and at 1, 2, 3, 5, 7, 14, and 28 days after. Repeated analysis of variance (ANOVA) and the Tukey honestly significant difference (HSD) test were used to compare the recorded values among the groups (α=.05). RESULTS: In the P1 group, the casts stored at -20 °C exhibited the smallest overall size change, with a mean ±standard deviation volume of 99.42 ±0.04% compared with the original casts after 28 days of storage. This was followed by the casts stored at 4 °C, 20 °C, and 37 °C, with remaining volumes of 99.39 ±0.06% (P=.139), 99.14 ±0.08% (P<.001), and 98.96 ±0.03% (P<.001), respectively. For the P2 and P3 groups, casts stored at 4 °C retained the most volume at 99.82 ±0.01%, whereas those stored at -20 °C, 20 °C, and 37 °C underwent greater changes, with remaining volumes of 99.66 ±0.03%, 100.32 ±0.02%, and 100.44 ±0.02%, respectively (P<.001). The P3 group exhibited a similar trend to that of the P2 group, with the casts stored at 4 °C remaining closest to the original dimensions at 99.86 ±0.02%, while casts stored at -20 °C showed 99.73 ±0.03% of the original volume and those stored at 20 °C and 37 °C expanded with volumes of 100.37 ±0.03% and 100.48 ±0.03%, respectively (P<.001). CONCLUSIONS: DLP printed casts stored at 4 °C exhibited the greatest overall dimensional stability, followed sequentially by those stored at -20 °C, 20 °C, and 37 °C. Additionally, the study confirmed that the posterior and anterior teeth regions of DLP printed casts respond differently to different storage temperatures.

Accuracy and efficiency of dynamic navigated root-end resection in endodontic surgery: a pilot in vitro study.

BACKGROUND: The operation accuracy and efficiency of dynamic navigated endodontic surgery were evaluated through in vitro experiments. This study provides a reference for future clinical application of dynamic navigation systems in endodontic surgery. MATERIALS AND METHODS: 3D-printed maxillary anterior teeth were used in the preparation of models for endodontic surgery. Endodontic surgery was performed with and without dynamic navigation by an operator who was proficient in dynamic navigation technology but had no experience in endodontic surgery. Optical scanning data were applied to evaluate the length and angle deviations of root-end resection. And the operation time was recorded. T tests were used to analyze the effect of dynamic navigation technology on the accuracy and duration of endodontic surgery. RESULTS: With dynamic navigation, the root-end resection length deviation was 0.46 ± 0.06 mm, the angle deviation was 2.45 ± 0.96°, and the operation time was 187 ± 22.97 s. Without dynamic navigation, the root-end resection length deviation was 1.20 ± 0.92 mm, the angle deviation was 16.20 ± 9.59°, and the operation time was 247 ± 61.47 s. Less deviation was achieved and less operation time was spent with than without dynamic navigation (P < 0.01). CONCLUSION: The application of a dynamic navigation system in endodontic surgery can improve the accuracy and efficiency significantly for operators without surgical experience and reduce the operation time.

[Preliminary evaluation of chin symmetry with three dimentional soft tissue spatial angle wireframe template].

OBJECTIVE: To develop an efficient and robust method based on three dimensional facial landmarks for evaluating chin region asymmetry at the soft tissue level and to compare it with the traditional mirror-overlap analysis method in order to test its availability. METHODS: Standard symmetrical face was used for mental tubercle coordinate transformation so as to filter soft tissue three dimensional spatial angle and construct corresponding three dimensional spatial angle wireframe template. Ten patients aged 12-32 years with clinical chin region asymmetry diagnosis at the Department of Orthodontics of Peking University Hospital of Stomatology from November 2020 to November 2021 were randomly selected. Three dimensional soft tissue face scan data of the patients were collected by three dimensional face scanner and the landmark points were automatically determined by the Meshmonk non-rigid registration algorithm program, and in this way, the asymmetric three dimensional spatial angle wireframe template and corresponding spatial angle parameters were generated. Mirror-overlap analysis of face scan data was also performed in Geomagic Studio 2015 software and deviation color maps were generated. This study took mirror-overlap analysis as the gold standard method, the response rate of chin region asymmetry was eva-luated by the outcomes of the mirror-overlap analysis and three dimensional spatial angle wireframe template analysis. RESULTS: Nine three dimensional spatial angle indicators were selected through coordinate transformation, and the response rate was calculated using mirror-overlap analysis as the gold standard method. Among these ten selected patients, the response rate of the total chin region asymmetry was 90% (9/10). Using the deviation value of mirror-overlap analysis as a reference, the response rate of chin region asymmetry in the X dimension was 86%, the response rate of chin region asymmetry in the Y dimension was 89%, and the response rate of chin region asymmetry in the Z dimension was 100%. CONCLUSION: The three dimensional soft tissue spatial angle wireframe template proposed in this study has some feasibility in evaluating chin region asymmetry at the soft tissue level, and its ability to recognize asymmetry separately in the three dimensional direction is better than the mirror-overlap analysis method, and the indicators recognition rate still needs to be further improved.

[Current Status and Analysis of the Clinical Application of Digital Technology in Oral Medicine]. / æ•°å­—åŒ–æŠ€æœ¯åœ¨å£è ”åŒ»å­¦çš„ä¸´åºŠåº”ç”¨çŽ°çŠ¶ä¸Žåˆ†æž.

With the increasing maturity and popularization of digital technology in oral medicine, its application has now expanded to various clinical subspecialties of oral medicine. Digitalization has become one of the important development directions of oral medicine. What is the current development status of digital technology in oral medicine? In what ways is digital technology applied across various clinical specialties of oral medicine? Dentists are particularly concerned about these issues in their clinical work and research. In this paper, all the digital technologies applied in oral medicine are organized and categorized from a technical perspective. In this paper, we focused on presenting three-dimensional data acquisition technology, dental computer-aided design technology, dental computer-aided processing technology, and oral surgery implementation technology. Their technical principles, technical characteristics, applications in oral medicine, a secondary discipline of medicine, and the development status of domestically-developed technology are described and reviewed in detail. The other technologies such as oral digital materials, oral virtual simulation teaching, and oral multi-source data management are briefly discussed. We intend to provide references for dentists to apply digital technology in clinical practice and research.

Clinical evaluation and quantitative occlusal change analysis of posterior implant-supported all-ceramic crowns: A 3-year randomized controlled clinical trial.

OBJECTIVES: To compare the survival and complication rates of posterior screw-retained monolithic lithium disilicate (LS2 )/veneered zirconia (ZrO2 ) single implant crowns (SICs), as well as analyze the occlusal changes observed during a 3-year follow-up period. MATERIALS AND METHODS: Thirty-three patients were included and randomly divided into two groups. The test group consisted of 17 patients who received monolithic-LS2 -SIC, while the control group consisted of 16 patients who received veneered-ZrO2 -SIC. Implant/prosthesis survival rates, technical complications, peri-implant soft tissue conditions, and quantitative occlusal changes of SIC (obtained by the intra-oral scanner and analyzed in reverse software Geomagic Control 2015) were assessed at 1- and 3-year follow-ups. Bone loss and Functional Implant Prosthodontic Score (FIPS) were evaluated at a 3-year follow-up. RESULTS: After a 3-year follow-up period, one patient dropped out of the follow-up. No implant loss was observed. One crown was fractured, resulting in prosthesis survival rates of 93.75% for the monolithic group and 100% for the veneered group. A technical complication rate of 25% (4/16) was observed in the veneered group (p = .333). No significant differences in the marginal bone loss were observed at the 3-year follow-up (0.00 (-0.22, 0.17) mm versus 0.00 (-0.12, 0.12) mm, p = .956). The total FIPS scores for the test group were 9.0 (9.0, 9.0), while the control group received scores of 9.0 (8.0, 10.0) (p = .953). The changes in mean occlusal clearance were 0.022 ± 0.083 mm for the test and 0.034 ± 0.077 mm for the control group (at 3 years, p = .497). The changes in occlusal contact area were 1.075 ± 2.575 mm2 for the test and 1.676 ± 2.551 mm2 for the control group (at 3 years, p = .873). CONCLUSION: After a 3-year follow-up, screw-retained monolithic LS2 and veneered ZrO2 SIC demonstrated similar survival rates. The occlusal performance of implant prostheses needs to be closely examined during follow-up, and appropriate occlusal adjustments need to be considered.

3D-printed titanium surgical guides for extraction of horizontally impacted lower third molars.

OBJECTIVES: This prospective study introduced a digitally designed sectioning guide and evaluated its feasibility for the extraction of horizontally impacted lower third molars. MATERIALS AND METHODS: This study included 38 horizontally impacted lower third molars, randomly divided into experimental and control groups. The teeth were extracted using a 3D-printed titanium surgical guide in the experimental group; free-hand extractions were performed in the control group. The surgical duration, tooth sectioning duration, cortical bone perforation, and postoperative complications, including pain, swelling, trismus, dry socket, infection, and hemorrhage, were evaluated. RESULTS: Although not statistically significant, guided surgery tended to reduce the number of tooth sectioning steps compared to free-hand extractions. There were no cases of cortical bone perforation in the experimental group. Although the surgical duration was greater in the experimental group (p < 0.05), there were no differences in postoperative pain, swelling, and trismus. There were no cases of postoperative infection and hemorrhage in either group. CONCLUSIONS: 3D-printed titanium surgical guides had superior accuracy and safety compared to free-hand surgery. Further studies with larger sample sizes are required to verify these findings. CLINICAL RELEVANCE: The template improved the safety of tooth sectioning during impacted lower third molar surgery and resulted in a more predictable extraction. The narrow sectioning groove could fit comfortably with hypertrophic soft tissues in the posterior mandible.

Enhanced Lip-Contour During Facial Scan for 3D DSD and Implant Planning: A Blue Screen Approach.

When obtaining 3-dimensional (3D) facial images for digital smile design (DSD) and dental implant planning, inaccuracies may frequently be introduced by distortion in the region between the lips' vermilion border and the teeth. The present clinical technique aimed to reduce such deformation during face scanning, thereby facilitating 3D DSD. This is also essential to plan bone reduction with precision for implant reconstructions. A custom-made silicone matrix acting as a blue screen provided reliable support for 3D visualization of facial images in a patient requiring a new maxillary screw-retained implant-supported fixed complete denture. Imperceptible volumetric changes were registered in the facial tissues when the silicone matrix was added. The usual deformation of the lip vermilion border originating in face scans was overcome by applying blue-screen technology with a silicone matrix. Reproducing the vermilion border of the lip contour accurately may offer improved communication and visualization for 3D DSD. The silicone matrix was a practical approach that acted as a blue screen to display the transition from lips to teeth with satisfactory precision. Implementing blue-screen technology in reconstructive dentistry might increase predictability by reducing errors when scanning objects with challenging-to-capture surfaces.

Perceptual difference of smile aesthetics between 2-dimensional photographs and 3-dimensional dentofacial images: a cross-sectional study.

BACKGROUND: The aim of this study was to compare the perceptual difference of smile aesthetics between 2D photographs and 3D dentofacial images as perceived by orthodontists and graduate students. METHODS: Forty-eight subjects finished orthodontic treatment were recruited with 2D photographs of frontal, oblique and lateral views as well as 3D dentofacial images. Twelve senior orthodontists and 13 postgraduate students were asked to rate the 2D and 3D smile simulations based on visual analog scale (VAS) and to vote for smile features that affect the attractiveness of smile. At the end, they completed a questionnaire about their views on different smile simulations. Wilcoxon signed-rank, Bland-Altman analysis, and multiple linear regression were used to compare the ratings and votes of smile perception between raters and between records. RESULTS: Orthodontists and postgraduate students rated smile consistently with 2D photographs, while orthodontists tended to give a higher rate for unattractive smiles and a lower rate for attractive smiles with 3D dentofacial images. The 3D dentofacial images were rated significantly lower than 2D photographs and the voting of most of the smile features showed significant negative main effect on VAS scores, while the effect of demographic characteristics of raters, voting on visible width of upper dentition and buccal corridor was not significant. In addition, a significant negative main effect of commissure and facial profile was found on the rating discrepancy between 2D and 3D images. CONCLUSIONS: Senior orthodontists tend to perceived 3D images more conservatively in smile evaluation. 3D dentofacial images were rated lower than 2D photographs and most of the smile features affect the aesthetic perception of smile. The perceptual difference of commissure and facial profile contributed to the lower ratings in 3D dentofacial images.

Subjective evaluation of facial asymmetry with three-dimensional simulated images among the orthodontists and laypersons: a cross-sectional study.

OBJECTIVES: We used three-dimensional (3D) virtual images to undertake a subjective evaluation of how different factors affect the perception of facial asymmetry among orthodontists and laypersons with the aim of providing a quantitative reference for clinics. MATERIALS AND METHODS: A 3D virtual symmetrical facial image was acquired using FaceGen Modeller software. The left chin, mandible, lip and cheek of the virtual face were simulated in the horizontal (interior/exterior), vertical (up/down), or sagittal (forward or backward) direction in 3, 5, and 7 mm respectively with Maya software to increase asymmetry for the further subjective evaluation. A pilot study was performed among ten volunteers and 30 subjects of each group were expected to be included based on 80% sensitivity in this study. The sample size was increased by 60% to exclude incomplete and unqualified questionnaires. Eventually, a total of 48 orthodontists and 40 laypersons evaluated these images with a 10-point visual analog scale (VAS). The images were presented in random order. Each image would stop for 30 s for observers with a two-second interval between images. Asymmetry ratings and recognition accuracy for asymmetric virtual faces were analyzed to explore how different factors affect the subjective evaluation of facial asymmetry. Multivariate linear regression and multivariate logistic regression models were used for statistical data analysis. RESULTS: Orthodontists were found to be more critical of asymmetry than laypersons. Our results showed that observers progressively decreased ratings by 1.219 on the VAS scale and increased recognition rates by 2.301-fold as the degree of asymmetry increased by 2 mm; asymmetry in the sagittal direction was the least noticeable compared with the horizontal and vertical directions; and chin asymmetry turned out to be the most sensitive part among the four parts we simulated. Mandible asymmetry was easily confused with cheek asymmetry in the horizontal direction. CONCLUSIONS: The degree, types and parts of asymmetry can affect ratings for facial deformity as well as the accuracy rate of identifying the asymmetrical part. Although orthodontists have higher accuracy in diagnosing asymmetrical faces than laypersons, they fail to correctly distinguish some specific asymmetrical areas.

Slim the face or not: 3D change of facial soft and hard tissues after third molars extraction: a pilot study.

BACKGROUND: Whether slim the face or not after removed third molars is the concern of some orthodontic treatment candidates. The aim of this article is to explore the volume changes of facial soft and hard tissues after third molars extraction, as well as develop a reproducible clinical protocol to precisely assess facial soft tissue volume change. METHODS: A non-randomized, non-blind, self-controlled pilot study was conducted. 24 adults aged 18-30 had ipsilateral third molars extracted. The body weight change was controlled within 2 kg. Structured light scans were taken under a standardized procedure pre-extraction (T0), three (T1), and six (T2) months post-extraction; CBCTs were taken at T0 and T2. The projection method was proposed to measure the soft tissue volume (STV) and the soft tissue volume change (STVC) by the Geomagic software. The hard tissue volume change (HTVC) was measured in the Dragonfly software. RESULTS: The final sample size is 23, including 5 males (age 26.6 ± 2.5 years) and 18 females (age 27.3 ± 2.5 years). The HTVC was - 2.33 ± 0.46ml on the extraction side. On the extraction side, the STV decreased by 1.396 (95% CI: 0.323-2.470) ml (P < 0.05) at T1, and increased by 1.753 (95% CI: -0.01-3.507) ml (P = 0.05) at T2. T2 and T0 had no difference (P > 0.05). The inter and intra-raters ICC of the projection method was 0.959 and 0.974. There was no correlation between the STVC and HTVC (P > 0.05). CONCLUSIONS: After ipsilateral wisdom teeth extraction, the volume of hard tissue on the extraction side reduces, and the volume of facial soft tissue does not change evidently. However, further research with large sample size is still needed. The STV measurement has excellent repeatability. It can be extended to other interested areas, including forehead, nose, paranasal, upper lip, lower lip and chin, which is meaningful in the field of orthodontics and orthopedics. TRIAL REGISTRATION: ChiCTR, ChiCTR1800018305 (11/09/2018), http://www.chictr.org.cn/showproj.aspx?proj=28868 .

A mathematical algorithm of the facial symmetry plane: Application to mandibular deformity 3D facial data.

The three-dimensional (3D) symmetry reference plane (SRP) is the premise and basis of 3D facial symmetry analysis. Currently, most methods for extracting the SRP are based on anatomical landmarks measured manually using a digital 3D facial model. However, as different clinicians have varying definitions of landmarks, establishing common methods suitable for different types of facial asymmetry remains challenging. The present study aimed to investigate and evaluate a novel mathematical algorithm based on power function weighted Procrustes analysis (PWPA) to determine 3D facial SRPs for patients with mandibular deviation. From 30 patients with mandibular deviation, 3D facial SRPs were determined using both our PWPA algorithms (two functions) and the traditional PA algorithm (experimental groups). A reference plane, defined by experts, was considered the 'truth plane'. The 'position error' index of mirrored landmarks was created to quantitatively evaluate the difference among the PWPA SRPs and the truth plane, including overall differences and regional differences of the face (upper, middle and lower). The 'angle error' values between the SRPs and the truth plane in the experimental groups were also evaluated in this study. Statistics and measurement analyses were used to comprehensively evaluate the clinical suitability of the PWPA algorithms to construct the SRP. The average angle error values between the PWPA SRPs of the two functions and the truth plane were 1.21 ± 0.65° and 1.18 ± 0.62°, which were smaller than those between the PA SRP and the truth plane. The position error values of mirrored landmarks constructed using the PWPA algorithms for the whole face and for each facial partition were lower than those constructed using the PA algorithm. In conclusion, for patients with mandibular deviation, this novel mathematical algorithm provided a more suitable SRP for their 3D facial model, which achieved a result approaching the true effect of experts.

Design of occlusal wear facets of fixed dental prostheses driven by personalized mandibular movement.

STATEMENT OF PROBLEM: Existing virtual articulators simulate mandibular movement by using various parameters and are used to design restorations. However, they are not able to reproduce actual patient movements, and the designs of occlusal wear facets by them and by personalized mandibular movement have not been compared. PURPOSE: The purpose of this clinical study was to establish a clinical application protocol for a virtual articulator based on previous research and to evaluate the accuracy of the occlusal wear facets designed by it. MATERIAL AND METHODS: The gypsum casts of 12 participants were scanned with a cast scanner as the original data. A single crown, 3-unit splinted crowns, a 5-unit fixed partial denture, and a fixed complete denture were virtually prepared on the digital mandibular casts by using the Geomagic Studio 2013 software program. High points were created at the wear facets, and corresponding digital wax patterns with occlusal interferences were generated. The exocad software program was used to design corresponding restorations with the copy method. Static (STA restoration) and dynamic (DYN restoration) occlusal adjustments were carried out with the built-in virtual articulator. The mandibular movements of participants were recorded by the novel virtual articulator system, and the occlusal surfaces of the digital wax patterns were adjusted (FUN restoration). The restorations adjusted with the 3 methods were compared with the original data. The mean value and root mean square (RMS) of 3D deviation and positive volumes (V+) in the occlusal direction were measured. Depending on the normality, 1-way ANOVA and the Kruskal-Wallis test were used to analyze the influence of occlusal surface design methods on the morphology of occlusal wear facets (α=.05). RESULTS: The mean deviation of the 4 kinds of STA restorations ranged from 0.19 mm to 0.22 mm, the DYN restorations from 0.13 mm to 0.17 mm, and the FUN restorations from 0.03 mm to 0.09 mm. A significant difference was found between the STA and FUN restorations of the 3-unit splinted crowns and 5-unit fixed partial dentures (Ρ=.013, Ρ=.021). The mean values of 3D deviation and V+ decreased from the STA group to the DYN group and then to the FUN group. The RMS and V+ were statistically similar (Ρ>.05). CONCLUSIONS: The preliminary results of the study indicate that the FUN 3-unit splinted crowns and 5-unit fixed partial dentures designed with the self-developed virtual articulator were better than the STA restorations. The FUN restorations were more coincident with the morphology of the wear facets on the original teeth.

Accuracy and feasibility of 3D-printed custom open trays for impressions of multiple implants: A self-controlled clinical trial.

STATEMENT OF PROBLEM: Three-dimensionally printed custom open trays have become a popular option in clinical implant dentistry because of advantages such as individualization, efficiency, and effectiveness. However, clinical evidence on their accuracy and feasibility is lacking. PURPOSE: The purpose of this clinical study was to evaluate the accuracy and feasibility for impressions of multiple implants by using 3D-printed custom open trays versus conventional custom open trays. MATERIAL AND METHODS: Twenty-two partially edentulous individuals needing impression making for restorations supported by multiple implants were enrolled. Two types of custom open trays were made for each participant, a 3D-printed tray (test) and a conventional tray (control). With a splinted technique, silicone definitive impressions were obtained with the 2 custom open trays and poured with Type IV dental stone. Impression accuracy (primary outcome) was evaluated by measuring linear distances and the marginal gaps between the implant replicas and verification devices on the test and control casts. Clinical tray fit, impression quality, and cast quality were rated by an independent technician through a visual analog scale (VAS). The fabrication time and cost of the 2 types of custom open trays were recorded. The feasibility of 3D-printed trays was determined from these outcomes. The paired Student t test and Wilcoxon rank-sum tests were used for statistical analysis (α=.05). RESULTS: For impression accuracy, no statistically significant difference was found between test and control groups (P>.05). In terms of clinical tray fit, impression quality, and cast quality, no statistically significant difference was found (all P>.05). Regarding fabrication time and cost, the test group (57.65 ±6.49 minutes, 0.37 ±0.07 United States dollars [USD]) exhibited superiority over the control group (101.96 ±2.92 minutes, 4.41 ±0.37 USD) (both P<.001). CONCLUSIONS: Within the limitations of this study, the 3D-printed custom open trays were clinically accurate, efficient, and cost-effective for impressions of multiple implants.

Morphologic reproducibility in 6 regions of the 3-dimensional facial models acquired by a standardized procedure: An in vivo study.

INTRODUCTION: A standardized procedure was proposed to control involuntary motion and other factors during the capture of structural light scanning that could influence the morphology of 3-dimensional facial models; interoperator reproducibility was evaluated. METHODS: Twenty subjects volunteered for facial scanning. Three researchers scanned each volunteer 3 times on the same day using the FaceScan structural light scanning system (Isravision, Darmstadt, Germany) and after the proposed procedure. Captures were done at 5-minute intervals. The 3 facial scans acquired by the same researcher were compared by reverse engineering software (Geomagic; 3D Systems, Rock Hill, SC). Six facial regions, including forehead, nose, paranasal, upper lip, lower lip and chin, and cheek, were divided. With the first scan as a reference, the other 2 scans were registered, and surface-to-surface distance maps were acquired to calculate the mean, standard deviation, and root mean squares (RMS) between 2 surfaces. The reproducibility between 3 researchers was then evaluated by a 1-way analysis of variance. RESULTS: The mean of 6 facial regions was close to 0. The RMS of lip regions were largest (0.48-0.53 mm), the forehead was smallest (0.21 mm), and the others ranged 0.37 mm to 0.42 mm. The standard deviation was slightly smaller than RMS and had the same trend of change. There was no significant difference in RMS among the 3 researchers (P >0.05). CONCLUSIONS: With the constraint of the standardized procedure, the morphologic reproducibility of facial models in 6 regions was satisfying.

Three-dimensional measurement of periodontal support during surgical orthodontic treatment of high-angle skeletal Class III malocclusion: A retrospective study.

INTRODUCTION: This study aimed to quantify the periodontal health of incisors during surgical orthodontic treatment in patients with high-angle Class III malocclusion using a cone-beam computed tomography (CBCT) 3-dimensional (3D) reconstruction technique. METHODS: The sample consisted of 30 patients with high-angle Class III malocclusion (mean age, 20.53 ± 2.86 years). CBCT images were taken before treatment (T0), after presurgical orthodontic treatment, and after treatment (T2). In addition, 3D tooth and alveolar bone models were generated. The root surface area, periodontal ligament (PDL)_Area, and vertical bone level (VBL) around the maxillary and mandibular central incisors were measured. RESULTS: The root surface area and PDL_Area of maxillary and mandibular central incisors decreased continuously between T0 and T2 (P <0.01). At T2, mandibular central incisors showed 38.64 ± 13.39% PDL_Area loss, and maxillary central incisors exhibited 21.13 ± 16.48% PDL_Area loss. For mandibular central incisors, the PDL_Area loss caused by VBL loss was significantly greater than that for maxillary central incisors (P <0.01) and significantly greater than the PDL_Area loss caused by root resorption (P <0.01). From T0 to T2, the lingual surface of maxillary central incisors exhibited greater VBL loss than the other 3 surfaces (P <0.01), and the labial and lingual surfaces of mandibular central incisors demonstrated greater VBL loss than proximal surfaces (P <0.01). CONCLUSIONS: The 3D CBCT reconstruction method provides useful information regarding the periodontal defects of incisors in patients with high-angle skeletal Class III malocclusion. The PDL_Area of maxillary and mandibular central incisors decreased continuously during the treatment. Vertical alveolar bone levels at proximal surfaces appeared to be relatively stable.

Digital versus radiographic accuracy evaluation of guided implant surgery: an in vitro study.

BACKGROUND: Cone-beam computed tomography (CBCT) is the most widely used method for postsurgical evaluation of the accuracy of guided implant surgery. However, the disadvantages of CBCT include radiation exposure, artifacts caused by metal implants, and high cost. Few studies have introduced a digital registration method to replace CBCT for evaluating the accuracy of guided surgery. The purpose of this study was to compare digital registration to conventional CBCT in terms of the capacity to evaluate the implant positioning accuracy of guided surgery. MATERIALS AND METHODS: This in vitro study included 40 acrylic resin models with posterior single mandibular tooth loss. Guided surgery software was used to determine the optimal implant position; 40 tooth-supported fully guided drilling templates were designed and milled accordingly. After the guided surgery, the accuracies of the surgical templates were evaluated by conventional CBCT and digital registration. For evaluation by conventional CBCT, postsurgical CBCT scans of the resin models were performed. The CBCT data were reconstructed and superimposed on the implant planning data. For digital registration, we constructed a virtual registration unit that consisted of an implant replica and a scan body. Next, we obtained postsurgical optical scans of resin models with the scan body. The postsurgical implant position was identified by superimposition of the registration unit and optical scan data. The implant planning data and postsurgical implant position data were superimposed; deviations were reported in terms of distance for implant entry/apex point and in terms of angle for the implant axis. Interclass correlation coefficients (ICCs) and Bland-Altman plots were used to analyze the agreement between the two evaluation methods. RESULTS: The ICCs between the two methods were 0.986, 0.993, and 0.968 for the entry point, apex point, and angle, respectively; all were significantly greater than 0.75 (p < 0.001). Bland-Altman plots showed that the 95% limits of agreement of the differences were - 0.144 to + 0.081 mm, - 0.135 to + 0.147 mm, and - 0.451° to + 0.729° for the entry point, apex point, and angle, respectively; all values were within the maximum tolerated difference. CONCLUSION: Conventional CBCT and digital registration showed good agreement in terms of evaluating the accuracy of implant positioning using tooth-supported surgical templates.

A Digital Technique to Fabricate Segmental Individual Tooth Trays for Making an Impression of Multiple Crown Preparations.

A digital technique is described for designing and fabricating segmental individual tooth trays that can be used to make an impression of multiple preparations with high accuracy and efficiency. A digital model of prepared dentition was acquired. The segmental individual tooth trays with retention attachments and tissue stops were designed and 3D printed with light-polymerizing resin. The segmental impression of each section of the prepared dentition was made with the corresponding individual tooth tray loaded with the impression material. A final overall impression was made to pick up the segmental individual tooth trays with a full arch tray.

The Accuracy of Transferring Casts in Maximal Intercuspal Position to a Virtual Articulator.

PURPOSE: To analyze the accuracy of transferring casts in maximal intercuspal position to a virtual articulator by using transfer plates in the laboratory scanner before and after occlusal optimization. MATERIAL AND METHODS: Five sets of standard dental casts were mounted on a mechanical articulator in maximal intercuspal position. The number and position of occlusal contacts were determined with 12-µm articulating foil. After a calibration process according to the manufacturer's instructions, the mountings were transferred to a virtual articulator using the transfer plates in a laboratory scanner. The occlusion of the digital casts was determined before and after the occlusal optimization process. Then, the sensitivity and positive predictive value were determined by comparing the occlusal contact points in the virtual articulator with those in the mechanical articulator. To evaluate trueness, the occlusal surface of the maxillary teeth in the mechanical articulator was recorded by polyvinyl siloxane occlusal record in maximal intercuspal position and retained on the mandibular arch. The trueness was calculated as the deviation between the occlusal surface of the maxillary teeth in the mechanical articulator and the virtual articulator. To evaluate precision, one set of the casts was scanned 10 times. And the deviation of the interarch position of the maxillary arches when superimposing the mandibular arches of every 2 different scans was calculated. RESULTS: The sensitivity before occlusal optimization (0.14 ± 0.15) was significantly lower than that after occlusal optimization (0.82 ± 0.10) (p = 0.003). However, there was no significant difference between the positive predictive value before (0.80 ± 0.45) and after (0.81 ± 0.09) occlusal optimization (p = 0.952). The trueness before (91.0 ± 10.7 µm) and after (75.4 ± 25.2 µm) occlusal optimization had no significant difference (p = 0.249). The precision before occlusal optimization (11.6 ± 3.8 µm) was significantly superior to that after occlusal optimization (75.6 ± 39.2 µm ) (p < 0.001). CONCLUSIONS: The accuracy of transferring casts in maximal intercuspal position to a virtual articulator using transfer plates in the laboratory scanner could be improved after occlusal optimization and can meet the clinical needs for occlusal design and analysis of prostheses.

Comparative transcriptomic analyses of glucosinolate metabolic genes during the formation of Chinese kale seeds.

BACKGROUND: To understand the mechanism of glucosinolates (GSs) accumulation in the specific organs, combined analysis of physiological change and transcriptome sequencing were applied in the current study. Taking Chinese kale as material, seeds and silique walls were divided into different stages based on the development of the embryo in seeds and then subjected to GS analysis and transcriptome sequencing. RESULTS: The main GS in seeds of Chinese kale were glucoiberin and gluconapin and their content changed with the development of the seed. During the transition of the embryo from torpedo- to the early cotyledonary-embryo stage, the accumulation of GS in the seed was accompanied by the salient decline of GS in the corresponding silique wall. Thus, the seed and corresponding silique wall at these two stages were subjected to transcriptomic sequencing analysis. 135 genes related to GS metabolism were identified, of which 24 genes were transcription factors, 81 genes were related to biosynthetic pathway, 25 genes encoded catabolic enzymes, and 5 genes matched with transporters. The expression of GS biosynthetic genes was detected both in seeds and silique walls. The high expression of FMOGS-OX and AOP2, which is related to the production of gluconapin by side modification, was noted in seeds at both stages. Interestingly, the expression of GS biosynthetic genes was higher in the silique wall compared with that in the seed albeit lower content of GS existed in the silique wall than in the seed. Combined with the higher expression of transporter genes GTRs in silique walls than in seeds, it was proposed that the transportation of GS from the silique wall to the seed is an important source for seed GS accumulation. In addition, genes related to GS degradation expressed abundantly in the seed at the early cotyledonary-embryo stage indicating its potential role in balancing seed GS content. CONCLUSIONS: Two stages including the torpedo-embryo and the early cotyledonary-embryo stage were identified as crucial in GS accumulation during seed development. Moreover, we confirmed the transportation of GS from the silique wall to the seed and proposed possible sidechain modification of GS biosynthesis may exist during seed formation.