[Association Between Dietary Knowledge and Food Preferences in Residents Aged 18 and Over in China Based on Latent Class Analysis].

Objective To investigate the food preferences and explore the potential association between dietary knowledge and food preferences in residents aged 18 and over in China,so as to provide a basis for promoting healthy diets.Methods The latent class analysis was carried out with the 2015 cross-sectional data of China health and nutrition survey to categorize the food preferences among 8 783 residents aged 18 and over.Multinomial Logistic regression was adopted to assess the association between and dietary knowledge and food preferences.Results The food preferences of the residents aged 18 and over in China were classified into preference for less vegetable(3.28%),lack of preference(11.20%),diverse preferences(4.19%),and preference for healthy diets(81.33%).The proportion of the adults with dietary knowledge was 36.87%(3 238/8 783).The dietary knowledge varied in the adults with different food preferences(all P<0.001).After adjusting for gender,age,urban and rural distribution,education background,and annual household income,for each point increase in the dietary knowledge score,there was an estimated reduction of 22% in the probability of preferring less vegetables(OR=0.78,95%CI=0.76-0.80, P<0.001),13% in the probability of lacking preference(OR=0.87,95%CI=0.86-0.89, P<0.001),and 3% in the probability of having diverse preferences(OR=0.97,95%CI=0.94-1.00, P=0.030).Compared with those lacking dietary knowledge,the individuals with dietary knowledge had a 77% less probability of preferring less vegetables(OR=0.23,95%CI=0.16-0.32, P<0.001),a 55% less probability of lacking preference(OR=0.45,95%CI=0.39-0.53, P<0.001),and a 23% less probability of having diverse preferences(OR=0.77,95%CI=0.61-0.96, P=0.023).Conclusions The residents aged 18 and over in China presented four food preferences,including preference for less vegetables,lack of preference,diverse preferences,and preference for healthy diets,the last of which had the highest proportion.The individuals with lower levels of dietary knowledge have higher probability of preferring unhealthy food.

[Comparison on Performance of Quantitative Ultrasound and Dual-Energy X-ray Absorptiometry in Evaluating Bone Health of Adults Aged 18-40 Years].

Objective To compare the consistency of quantitative ultrasound(QUS)and dual-energy X-ray absorptiometry(DXA)in measuring bone mineral density(BMD)of adults aged 18-40 years in Guangzhou and evaluate the diagnostic value of QUS for identifying low bone mass.Methods DXA was employed to measure the BMD and QUS to measure the speed of sound(SOS)in 731 participants.The Bland-Altman analysis was performed to evaluate the consistency of Z scores between SOS and BMD.With the BMD Z ≤-2.00 as the diagnostic criterion for low bone mass,the receiver operating characteristics curve of QUS was established,and the area under the curve(AUC)and the sensitivity,specificity,and correct diagnostic index for the optimal cut-off of SOS Z score were calculated.Results The results of Bland-Altman analysis showed that the mean differences in the Z scores of SOS and BMD in males and females were 1.27(-0.94 to 3.47)and 0.93(-1.33 to 3.18),respectively.The AUC of SOS Z score in the diagnosis of low bone mass in males and females was 0.734(95%CI=0.380-0.788)and 0.679(95%CI=0.625-0.732),respectively.In males,the optimal cut-off of SOS Z score for low bone mass was -0.35,with the sensitivity,specificity,and correct diagnostic index of 64.1%,68.6%,and 0.327,respectively.In females,the optimal cut-off value of SOS Z scores for low bone mass was -1.14,with the sensitivity,specificity,and correct index of 73.9%,54.8%,and 0.285,respectively.Conclusion QUS and DXA show poor consistency in the diagnosis of BMD in the adults aged 18-40 years in Guangzhou,while QUS demonstrates an acceptable value in identifying low bone mass.

Two Copper-Containing Polyoxometalate-Based Metal-Organic Complexes as Heterogeneous Catalysts for the C-H Bond Oxidation of Benzylic Compounds and Olefin Epoxidation.

Using a one-pot assembly method, two novel copper-containing Keggin-type polyoxometalates (POMs)-based metal-organic complexes, that is, [CuII2(pbba)2NO3-(H2O)2(PW12O40)]·3H2O [PW12-Cu-pbba, H2pbba = 1,1'-(1,4-phenylene-bis(methylene))-bis(pyridine-3-carboxylic acid)] and [CuII2(pbba)2(H2O)2(GeW12O40)]·3H2O (GeW12-Cu-pbba), were successfully synthesized. These two complexes are isostructural, differing only in their POM components. They are applicable as heterogeneous catalysts for the C-H bond oxidation of benzylic compounds and olefin epoxidation under mild conditions, with oxygen as the oxidant and isobutyraldehyde as the coreductant. The catalytic activity of PW12-Cu-pbba was superior to that of GeW12-Cu-pbba. Under the optimal conditions, PW12-Cu-pbba catalyzed the oxidation of indane into 1-indanone with an 81% yield and >99% selectivity within 48 h. As heterogeneous catalysts, both complexes demonstrated excellent recoverability and high stability and could be stably reused five times without significant activity loss.

Design and Synthesis of Cathepsin-K-Activated Osteoadsorptive Fluorogenic Sentinel (OFS) Probes for Detecting Early Osteoclastic Bone Resorption in a Multiple Myeloma Mouse Model.

We describe the design and synthesis of OFS-1, an Osteoadsorptive Fluorogenic Sentinel imaging probe that is adsorbed by hydroxyapatite (HAp) and bone mineral surfaces, where it generates an external fluorescent signal in response to osteoclast-secreted cathepsin K (Ctsk). The probe consists of a bone-anchoring bisphosphonate moiety connected to a Förster resonance energy transfer (FRET) internally quenched fluorescent (IQF) dye pair, linked by a Ctsk peptide substrate, GHPGGPQG. Key structural features contributing to the effectiveness of OFS-1 were defined by structure-activity relationship (SAR) and modeling studies comparing OFS-1 with two cognates, OFS-2 and OFS-3. In solution or when preadsorbed on HAp, OFS-1 exhibited strong fluorescence when exposed to Ctsk (2.5-20 nM). Time-lapse photomicrographs obtained after seeding human osteoclasts onto HAp-coated well plates containing preadsorbed OFS-1 revealed bright fluorescence at the periphery of resorbing cells. OFS-1 administered systemically detected early osteolysis colocalized with orthotopic engraftment of RPMI-8226-Luc human multiple myeloma cells at a metastatic skeletal site in a humanized mouse model. OFS-1 is thus a promising new imaging tool for detecting abnormal bone resorption.

Synthesis of 8-oxo-dGTP and its ß,γ-CH2-, ß, γ-CHF-, and ß, γ-CF2- analogues.

Three novel 8-oxo-dGTP bisphosphonate analogues of 3 in which the bridging ß,γ-oxygen is replaced by a methylene, fluoromethylene or difluoromethylene group (4-6, respectively) have been synthesized from 8-oxo-dGMP 2 by reaction of its morpholine 5'-phosphoramidate 14 or preferably, its N-methylimidazole 5'-phosphoramidate 15 with n-tributylammonium salts of the appropriate bisphosphonic acids, 11-13. The latter method also provides a convenient new route to 3. Analogues 4-6 may be useful as mechanistic probes for the role of 3 in abnormal DNA replication and repair.

DFT studies on the mechanism of Ag2 CO3 -catalyzed hydroazidation of unactivated terminal alkynes with TMS-N3 : An insight into the silver(I) activation mode.

Silver-mediated hydroazidation of unactivated alkynes has been developed as a new method for the synthesis of vinyl azides. Density functional theory calculations toward this reaction reveal that terminal alkynes with TMS-N3 participated hydroazidation proceed through HN3 formation, deprotonation and silver acetylides formation, nucleophilic addition, and protonation of terminal carbon by AgHCO3 . It is also found that water molecules and activation modes of Ag (I) have a significant influence on the title reaction mechanism. Initially, catalyst Ag2 CO3 coordinates preferentially with internal N atom of TMS-N3 to assist water as hydrogen source and proton-shuttle in facilitating HN3 formation. Then, the regioselective anti-addition of HN3 to triple bond of active silver-acetylide or ethynyl carbinols affords product vinyl azide via Ag-C σ-bond activation or Ag…C π-coordination activation modes, and the former one is more favorable. The origin of the difference regioselectivity is ascribed to the electronic and orbital effects of the reactive sites. Moreover, Ag2 CO3 is the critical catalyst, acting as activator, base, and stabilizer to promote the HN3 and vinyl azide formation. Water molecule plays an important role as proton shuttle to promote HN3 and key active silver acetylides formation, thus improving the yield of product. © 2017 Wiley Periodicals, Inc.

Computational Insights into an Enzyme-Catalyzed [4+2] Cycloaddition.

The enzyme SpnF, involved in the biosynthesis of spinosyn A, catalyzes a formal [4+2] cycloaddition of a 22-membered macrolactone, which may proceed as a concerted [4+2] Diels-Alder reaction or a stepwise [6+4] cycloaddition followed by a Cope rearrangement. Quantum mechanics/molecular mechanics (QM/MM) calculations combined with free energy simulations show that the Diels-Alder pathway is favored in the enzyme environment. OM2/CHARMM free energy simulations for the SpnF-catalyzed reaction predict a free energy barrier of 22 kcal/mol for the concerted Diels-Alder process and provide no evidence of a competitive stepwise pathway. Compared with the gas phase, the enzyme lowers the Diels-Alder barrier significantly, consistent with experimental observations. Inspection of the optimized geometries indicates that the enzyme may prearrange the substrate within the active site to accelerate the [4+2] cycloaddition and impede the [6+4] cycloaddition through interactions with active-site residues. Judging from partial charge analysis, we find that the hydrogen bond between the Thr196 residue of SpnF and the substrate C15 carbonyl group contributes to the enhancement of the rate of the Diels-Alder reaction. QM/MM simulations show that the substrate can easily adopt a reactive conformation in the active site of SpnF because interconversion between the C5-C6 s-trans and s-cis conformers is facile. Our QM/MM study suggests that the enzyme SpnF does behave as a Diels-Alderase.

α-Radical Phosphines: Synthesis, Structure, and Reactivity.

A series of phosphines featuring a persistent radical were synthesized in two steps by condensation of dialkyl-/diarylchlorophosphines with stable cyclic (alkyl)(amino)carbenes (cAACs) followed by one-electron reduction of the corresponding cationic intermediates. Structural, spectroscopic, and computational data indicate that the spin density in these phosphines is mainly localized on the original carbene carbon from the cAAC fragment; thus, it remains in the α-position with respect to the central phosphorus atom. The potential of these α-radical phosphines to serve as spin-labeled ligands is demonstrated through the preparation of several AuI derivatives, which were also structurally characterized by single-crystal X-ray diffraction.

α-Cationic Arsines: Synthesis, Structure, Reactivity, and Applications.

A series of structurally differentiated cationic arsines containing imidazolium, cyclopropenium, formamidinium, and pyridinium substituents have been synthesized through short and scalable routes. Evaluation of the donor properties of these compounds by IR spectroscopy and DFT calculations reveals similar σ-electron-releasing abilities for all of them; however, their π-acceptor properties are strongly influenced by the nature of the positively charged group. We describe the coordination chemistry of the newly prepared α-cationic arsines toward different metal centers and their reactivity in the presence of strong oxidants to afford cationic As(V) species. Their unique electronic properties have been exploited in Pt(II) catalysis to develop a new catalyst with remarkable activity in the cycloisomerization of enynes to trisubstituted cyclopropanes. To the best of our knowledge, this is the first report on the use of α-cationic arsine ligands in catalysis.

Nitrated Confined Imidodiphosphates Enable a Catalytic Asymmetric Oxa-Pictet-Spengler Reaction.

The development of a highly enantioselective catalytic oxa-Pictet-Spengler reaction has proven a great challenge for chemical synthesis. We now report the first example of such a process, which was realized by utilizing a nitrated confined imidodiphosphoric acid catalyst. Our approach provides substituted isochroman derivatives from both aliphatic and aromatic aldehydes with high yields and excellent enantioselectivities. DFT calculations provide insight into the reaction mechanism.

Mechanistic insight on (E)-methyl 3-(2-aminophenyl)acrylate cyclization reaction by multicatalysis of solvent and substrate.

The reaction mechanism of (E)-methyl 3-(2-aminophenyl)acrylate (A) with phenylisothiocyanate (B) as well as the vital roles of substrate A and solvent water were investigated under unassisted, water-assisted, substrate A-assisted, and water-A-assisted conditions. The reaction proceeds with four processes via nucleophilic addition, deprotonation and protonation, intramolecular cyclization with hydrogen transfer, and keto-enol tautomerization. According to the different H-shift mode, two possible types of H-shift P1 and P2 are carefully investigated to identify the most preferred pathway, differing in the NH2 group deprotonation and CH group of A protonation processes. It is found that substrate A and water not only act as reactant and solvent, but also as catalyst, proton shuttle, and stabilizer in effectively lowering the energy barrier. Therefore, the results demonstrate that the strong donating and accepting ability of NH2 group on A and the presence of bulk water are the keys to the title reaction proceed. © 2016 Wiley Periodicals, Inc.

Understanding the Mechanism of the Lewis Acid Promoted [3 + 2] Cycloaddition of Propargylic Alcohol and α-Oxo Ketene Dithioacetals.

The mechanism and origin of selectivities in BF3·Et2O-catalyzed intermolecular [3 + 2] cycloadditions of propargylic alcohol and α-oxo ketene dithioacetals have been studied using density functional theory. Several possible reaction pathways were evaluated on the basis of two possible binding modes between the carbonyl or hydroxyl oxygen of substrates and catalyst. The preferred mechanism initiates dehydroxylation of propargylic alcohol by Lewis acid BF3 and generates active allenic carbocation species to provide the favorable electrophile. It then proceeds via four processes involving nucleophilic addition of C(α) on α-oxo ketene dithioacetals to the C1 of active allenic carbocation intermediate, [1,4]-alkylthio shift, H(α)-elimination, and intramolecular cyclization. This reaction sequence is in contrast to the mechanism by a previously published study, that is, [1,4]-alkylthio migration occurs prior to the cyclization. Our calculated results suggested that electrostatic attraction and hydrogen-bonding interactions between substrates and catalyst play a vital role in the [3 + 2] cycloaddition.

Photocycloaddition reaction of atropisomeric maleimides: mechanism and selectivity.

We report a density functional study on the mechanism of the [2+2] photocyclization of atropisomeric maleimides. Experimentally, the reaction is known to proceed through the triplet state. We have located all relevant S0 and T1 minima and transition states, as well as the T1/S0 crossing points, and mapped eight stepwise photocyclization pathways for four different conformers in the T1 state that lead to distinct regioisomers. In the preferred four pathways (one for each conformer) the initially formed C-C bond involves the terminal carbon atom of the alkene moiety. This regioselectivity originates from electrostatic preferences (arising from the charge distribution in the polarized C[double bond, length as m-dash]C double bonds) and from the different thermodynamic stability of the resulting triplet diradical intermediates (caused by electron donation effects that stabilize the radical centers). The formation of the second C-C bond is blocked in the T1 state by prohibitively high barriers and thus occurs after intersystem crossing to the ground state. Furthermore, we rationalize substitution effects on enantioselectivity and diastereoselectivity and identify their origin.

The Organocatalytic Approach to Enantiopure 2H- and 3H-Pyrroles: Inhibitors of the Hedgehog Signaling Pathway.

A divergent approach to enantioenriched 2H- and 3H-pyrroles catalyzed by a spirocyclic phosphoric acid is reported that makes use of a Fischer-type indolization and a [1,5]-alkyl shift. Catalyzed by the chiral phosphoric acid STRIP, good to excellent yields and enantioselectivities could be obtained. Remarkably, biological evaluation reveals one of these novel 2H-pyrroles to be a potent but nontoxic inhibitor of the Hedgehog signaling pathway by binding to the Smoothened protein.

Confined Acid-Catalyzed Asymmetric Carbonyl-Ene Cyclization.

A highly enantioselective Brønsted acid catalyzed intramolecular carbonyl-ene reaction of olefinic aldehydes has been developed. Using a confined imidodiphosphate catalyst, the reaction delivers diverse trans-3,4-disubstituted carbo- and heterocyclic five-membered rings in high yields and with good to excellent diastereo- and enantioselectivities. ESI-MS, NMR, and DFT mechanistic studies reveal that the reaction proceeds via a stepwise pathway involving a novel covalent intermediate.

The multieffects of DMF and DBU on the [5 + 1] benzannulation of nitroethane and α-alkenoyl ketene-(S,S)-acetals: hydrogen bonding and electrostatic interactions.

A density functional theory (DFT) study was performed to elucidate the mechanism for the [5 + 1] benzannulation of nitroethane and α-alkenoyl ketene-(S,S)-acetals. The calculation results are consistent with experimental findings, showing that the reaction proceeds via deprotonation of nitroethane, nucleophilic addition, intramolecular cyclization, elimination of HNO2 , and the keto-enol tautomerization sequence. It was disclosed that N,N-dimethylformamide (DMF) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) act as not only solvent and nonnucleophilic base, respectively, but also catalysts in the reaction by stabilizing the transition states (TSs) and intermediates via intermolecular hydrogen bonds and electrostatic interactions. Besides, the effective orbital interaction of the reaction site in TS also contributes to the intramolecular cyclization step. The new mechanistic insights obtained by DFT calculations highlight that the hydrogen bonds and electrostatic interactions are key factors for the [5 + 1] benzannulation of nitroethane and α-alkenoyl ketene-(S,S)-acetals.

Rational design of phenoxazine-based donor-acceptor-donor thermally activated delayed fluorescent molecules with high performance.

A series of donor-acceptor compounds, including asymmetric D-B-Ai-B and symmetric D-B-Ai-B-D topologies, have been designed and investigated using density functional theory and time dependent density functional theory toward highly efficient thermally activated delayed fluorescent (TADF) materials. Phenoxazine (PXZ) is adopted as a donor (D) fragment, while 1,3,4-oxadiazole (A1), benzo[c][1,2,5]thiadiazole (A2), and quinoxaline (A3) are selected as acceptor fragments. A phenyl ring (B) is connected to Ai to extend the π-conjugation, leading to strong electron-withdrawing ability. Our results indicate that the singlet-triplet energy gaps (ΔEST) of symmetric D-B-Ai-B-D compounds are smaller than those of asymmetric D-B-Ai-B ones. For the same topologic series, the ΔEST values decrease with increasing electron-withdrawing strength of B-Ai-B. The lowest ΔEST value has been obtained for D-B-A2-B-D among all these investigated compounds, which displays the most efficient up-conversion from triplet to singlet excited states. Then, the potential energy surface and normal mode analyses were applied to discuss the charge injection and transport characteristics. The designed D-B-Ai-B-D compounds exhibited more effective charge injection with a lower ionization potential and a higher electron affinity than D-B-Ai-B ones. Meanwhile, the temperature dependent mobility was predicted by Marcus theory, both hole and electron mobilities of D-B-Ai-B-D increase with increasing temperature in the range of 5-200 K. However, hole mobility slightly decreases from 200 K to 300 K. The newly designed D-B-A2-B-D compounds demonstrate higher electron and hole mobilities than D-B-A1-B-D, implying that the chemical modification of acceptors effectively improves the carrier transport ability. Our theoretical investigation might provide more chances to challenge the rational design of novel and high-performance TADF-based organic light emitting diodes.

Enhancing user experience in the digital service environment: A comprehensive study on the design and evaluation of internet-based healthcare products.

RATIONALE: In the era of burgeoning digital technology, healthcare is a challenging transformative change towards virtual and digital platforms. Internet-based healthcare services are emerging as a popular trend within the medical area. User experience (UX) is paramount for the healthcare service, as it significantly influences experience satisfaction and fosters user viscosity. Gaining a profound understanding of users' demands and crafting services that align with their expectations is essential. METHODS: Consequently, exploring an effective design approach for the digital healthcare service that prioritizes UX along with utilizing a comprehensive evaluation methodology to handle UX data, is of profound importance. This study introduces a design methodology for Internet-based healthcare products grounded in the UX and mental (UX-M) model. Aiming to refine the Internet-based healthcare product design by integrating insights from the experience data, it employs the Delphi-ANP and the fuzzy comprehensive evaluation to determine evaluation indexes and conduct experiential assessments. RESULTS: The UX evaluation results of existing schemes are compared with the proposed design scheme of the intelligent guidance and internet hospital. The findings indicate that the UX evaluation of Internet-based medical services with the proposed method outperforms the existing schemes. CONCLUSIONS: On the one hand, UX research of Internet-based healthcare products can significantly enhance service satisfaction for patients utilizing online medical treatments. On the other hand, the analysis of experience-based evaluation empowers designers to refine and improve UX design of Internet-based medical services. Such research endeavors are critical for enhancing the overall quality of service offerings and elevating user satisfaction in the digital healthcare landscape.

Impact of lipoprotein(a) and fibrinogen on prognosis in patients with coronary artery disease: A retrospective cohort study.

BACKGROUND: Despite the considerable progress made in preventative methods, medication, and interventional therapies, it remains evident that cardiovascular events (CVEs) continue to be the primary cause of both death and morbidity among individuals diagnosed with coronary artery disease (CAD). OBJECTIVE: To compare the connection between lipoprotein a (Lp[a]), fibrinogen (Fib), and both parameters combined with all-cause mortality to detect their value as prognostic biomarkers. METHODS: This is a retrospective study. Patients diagnosed with CAD between January 2007 and December 2020 at the Guangdong Provincial People's Hospital (China) were involved in the study. 43,367 patients met the eligibility criteria. The Lp(a) and Fib levels were distributed into three tertile groups (low, medium, and high). All of the patients included in the study were followed up for all-cause mortality. Kaplan-Meier and Cox regression were performed to determine the relationship between Lp(a), Fib, and all-cause mortality. A concordance statistics model was developed to detect the impact of Fib and Lp(a) in terms of anticipating poor outcomes in patients with CAD. RESULTS: Throughout a median follow-up of 67.0 months, 6,883 (15.9%) patients died. Participants with high Lp(a) (above 27.60 mg/dL) levels had a significantly higher risk for all-cause mortality than individuals with low Lp(a) levels (below 11.13 mg/dL; adjusted hazard ratio [aHR] 1.219, 95% confidence interval [CI]: 1.141-1.304, p< 0.001). Similarly, patients with high Fib levels (above 4.32 g/L) had a significantly greater risk of developing all-cause mortality compared with those with reduced Fib levels (below 3.41 g/L; aHR 1.415, 95% CI: 1.323-1.514, p< 0.001). Patients with raised Lp(a) and Fib levels had the maximum risk for all-cause mortality (aHR 1.702; 95% CI: 1.558-1.859, p< 0.001). When considered together, Lp(a) and Fib caused a significant elevation of the concordance statistic by 0.009 (p< 0.05), suggesting a higher value for predicting mortality when combining the two indicators. CONCLUSION: High Lp(a) and Fib levels could be used as predictive biomarkers for all-cause mortality in individuals with CAD. The prediction accuracy for all-cause mortality improved after combining the two parameters.

The effect of ultrasonic power on the physicochemical properties and antioxidant activities of frosted figs pectin.

Ultrasound has been widely used in industry due to its high energy and efficiency. This study optimized the ultrasonic-assisted extraction (UAE) process of frosted figs pectin (FFP) using response surface methodology (RSM), and further investigated the effect of ultrasonic power on the structural characteristics and antioxidant activities of FFPs. The UAE method of FFP through RSM was optimized, and the optimal extraction process conditions, particle size of 100 mesh, pH value of 1.95, liquid-solid ratio of 47:1 (mL/g), extraction temperature of 50 °C and extraction time of 65 min, were obtained. The extraction rate of FFP under this condition was 37.97 ± 2.56 %. Then, the four FFPs modified by ultrasound were obtained by changing the ultrasonic power. Research had found that ultrasonic power had little effect on the monosaccharide composition, Zeta potential, as well as the thermal stability and appearance structure of the four FFPs. However, ultrasonic power had a significant impact on other properties of FFP: as the ultrasonic power increased, the DM% and particle size decreased continuously, while the total carbohydrate content increased. Meanwhile, ultrasonic power also had a significant impact on antioxidant activities of FFPs. From the research results, it could be seen that different ultrasonic power had certain changes in its spatial structure and properties, and the structural changes also affected the biological activity of FFP. The study of the effects of ultrasonic power on the physicochemical properties and biological activity of FFP lays the foundation for the development and application of FFP in food additives and natural drug carriers.