RESUMEN
Considering that typically more than two pin diodes or other tunable elements are required in the unit cell of polarization-insensitive reconfigurable metasurfaces (RMs), this paper proposes a new approach to design a polarization-insensitive RM unit using only one VO2 chip. A polarization-insensitive phase-modulated metasurface (PMM) using single VO2 chip is presented. The surface layer is composed of an outer ring and an inner cross, with a VO2 chip loaded at the connection of the cross. As the VO2 chip can be connected with the metal patch on all sides, only one VO2 chip is used in this polarization-insensitive design. By thermally controlling VO2 chips switch between low-resistance and high-resistance states, the PMM achieves a 1-bit phase shift within 180° ± 37° from 7.85 to 15â GHz. A prototype is fabricated and measured, and the measured results have verified the correction of the design and analysis of the designed PMM.
RESUMEN
We proposed an ultra-broadband reflective metamaterial with controlling the scattering electromagnetic fields based on a polarization convertor. The unit cell of the polarization convertor was composed of a three layers substrate with double metallic split-rings structure and a metal ground plane. The proposed polarization convertor and that with rotation angle of 90 deg had been employed as the "0" and "1" elements to design the digital reflective metamaterial. The numbers of the "0" and "1" elements were chosen based on the information entropy theory. Then, the optimized combinational format was selected by genetic optimization algorithm. The scattering electromagnetic fields had been manipulated due to destructive interference, which was attributed to the control of phase and amplitude by the proposed polarization convertor. Simulated and experimental results indicated that the reflective metamaterial exhibited significantly RCS reduction in an ultra-broad frequency band for both normal and oblique incidences.