Tungsten-Iron-Ruthenium Ternary Alloy Immobilized into the Inner Nickel Foam for High-Current-Density Water Oxidation.

The pursuit of highly-active and stable catalysts in anodic oxygen evolution reaction (OER) is desirable for high-current-density water electrolysis toward industrial hydrogen production. Herein, a straightforward yet feasible method to prepare WFeRu ternary alloying catalyst on nickel foam is demonstrated, whereby the foreign W, Fe, and Ru metal atoms diffuse into the Ni foam resulting in the formation of inner immobilized ternary alloy. Thanks to the synergistic impact of foreign metal atoms and structural robustness of inner immobilized alloying catalyst, the well-designed WFeRu@NF self-standing anode exhibits superior OER activities. It only requires overpotentials of 245 and 346 mV to attain current densities of 20 and 500 mA cm-2, respectively. Moreover, the as-prepared ternary alloying catalyst also exhibits a long-term stability at a high-current-density of 500 mA cm-2 for over 45 h, evidencing the inner-immobilization strategy is promising for the development of highly active and stable metal-based catalysts for high-density-current water oxidation process.

Diagnostic Potential of Complementation of MRI to Prenatal Ultrasound for Detecting Orofacial Clefts in High-Risk Fetuses: A Network Meta-Analysis.

OBJECTIVE: To compare the complementation of magnetic resonance imaging (MRI) to prenatal ultrasound (US) with prenatal US alone in detecting orofacial clefts in high-risk fetuses. DESIGN: A network meta-analysis. SETTING: Literature retrieval in PubMed, EMBASE, and Cochrane library, and meta-analysis based on STATA 14.0. PATIENTS: Fetuses were at high-risk for orofacial clefts. INTERVENTIONS: Prenatal US and the complementation of MRI to prenatal US. MAIN OUTCOME MEASURES: The pooled sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), diagnostic odds ratio (DOR), and area under the curve (AUC). RESULTS: Thirteen studies involving 776 patients were included. Direct meta-analysis showed that the complementation of MRI to prenatal US did not differ from prenatal US in detecting orofacial clefts if the type of orofacial clefts was not distinguished. Subgroup analysis showed that the specificity of prenatal US for the detection of isolated cleft palate (CP) was lower than that of the complementation of MRI to prenatal US. Furthermore, network meta-analysis consistently suggested a comparable diagnostic value between prenatal US and the complementation of MRI to prenatal US. Moreover, subgroup analysis showed that the specificity of prenatal US was significantly lower than that of complementation of MRI to prenatal US for the detection of isolated CP. CONCLUSIONS: MRI is more accurate than ultrasound in detecting cleft palate. Therefore, MRI should be offered if there is a fetus with a possible or ultrasound diagnosis of cleft palate, especially if the evaluation of cleft palate is deemed unsatisfactory after careful evaluation of the images.

Schiff Base Complex Cocatalyst with Coordinatively Unsaturated Cobalt Sites for Photoelectrochemical Water Oxidation.

Integrating inorganic oxygen evolution cocatalysts (OECs) with photoanodes is regarded as an available strategy to increase the photogenerated charge utilization for accelerated water oxidation kinetics. Nevertheless, most widely used transition metal (oxyhydr)oxides OECs suffer from inevitable charge recombination at photoanode/OECs interfaces and underabundant catalytic active sites. Herein, a cobalt-organic complex with microflower-like features (denoted as MF) was constructed by coordination of Schiff base ligands and Co2+ metal ions and then decorated on porous BiVO4 employed as photoanodes for photoelectrochemical (PEC) water oxidation. The as-synthesized BiVO4/MF photoanode achieves a photocurrent density of 4.38 mA cm-2 and at 1.23 VRHE in 0.5 M Na2SO4 electrolyte under simulated 1 sun illumination, over approximately 5.48 times larger than that of BiVO4 counterpart, and exhibits a 120 mV cathodic shift of onset potential with outstanding photostability. Systematic characterizations reveal that the improved PEC efficiency is mainly attributed to the well-designed coordinatively unsaturated Co2+ sites, which not only serve as powerful photohole extraction engines along reversed interfacial Co-O-Bi bonds to promote charge transfer across the BiVO4/complex interface but also act as reaction active centers by accelerating surface water oxidation kinetics. This work provides new insights for designing highly effective OECs for PEC water oxidation.

Access to 3-Sulfonamidoquinolines by Gold-Catalyzed Cyclization of 1-(2'-Azidoaryl)propargylsulfonamides through 1,2-N Migration.

We describe a gold-catalyzed cyclization of 1-(2'-azidoaryl)propargylsulfonamides for the synthesis of 3-sulfonamidoquinolines, featuring a rare and highly selective 1,2-N migration. The key α-imino gold carbene intermediate is generated through an intramolecular nucleophilic attack of the azide group to the Au-activated triple bonds in a 6-endo-dig manner.

Homochiral Dodecanuclear Lanthanide "Cage in Cage" for Enantioselective Separation.

It is extremely difficult to anticipate the structure and the stereochemistry of a complex, particularly when the ligand is flexible and the metal node adopts diverse coordination numbers. When trivalent lanthanides (LnIII) and enantiopure amino acid ligands are utilized as building blocks, self-assembly sometimes yields rare chiral polynuclear structures. In this study, an enantiopure carboxyl-functionalized amino acid-based ligand with C3 symmetry reacts with lanthanum cations to give a homochiral porous coordination cage, (Δ/Λ)12-PCC-57. The dodecanuclear lanthanide cage has an unprecedented octahedral "cage-in-cage" framework. During the self-assembly, the chirality is transferred from the enantiopure ligand and fixed by the binuclear lanthanide cluster to give 12 metal centers that have either Δ or Λ homochiral stereochemistry. The cage exhibits excellent enantioselective separation of racemic alcohols, 2,3-dihydroquinazolinones, and multiple commercially available drugs. This finding exhibits a rare example of a multinuclear lanthanide complex with a dual-walled topology and homochirality. The highly ordered self-assembly and self-sorting of flexible amino acids and lanthanides shed light on the chiral transformation between different complicated artificial systems that mimic natural enzymes.

Construction of 1,3-Oxazolidines through a Three-Component [3+2] Cycloaddition of Tetrahydroisoquinolines, Aldehydes, and Ethyl Ketomalonate.

A chemoselective and diastereoselective synthesis of fused oxazolidines was achieved by a three-component cascade reaction of tetrahydroisoquinolines (THIQs), α,ß-unsaturated aldehydes, and diethyl 2-oxomalonate. Probably due to the reactivity difference between the aldehyde and the ketone, the reaction proceeded through the condensation of THIQs with α,ß-unsaturated aldehydes and 1,3-dipolar cycloaddition of the generated azomethine ylide intermediate with 2-oxomalonate. The key features are easily available starting materials, mild reaction conditions, broad substrate scope, and high chemo- and diastereoselectivity.

A two-dimensional zinc(II)-based metal-organic framework for fluorometric determination of ascorbic acid, chloramphenicol and ceftriaxone.

A two-dimensional zinc(II)-based metal-organic framework [Zn • (BA) • (BBI)] was synthesized from 1,2-benzenediacetic acid and 1,1'-(1,4-butanediyl) bis(imidazole) via a solvothermal reaction. The crystal exhibits good chemical stability in the pH range from 2 to 12, and strong fluorescence with excitation/emission maxima of 270/290 nm. The crystal is shown to by a viable fluorescent probe for the detection of ascorbic acid (AA) and the antibiotics chloramphenicol (CHL) and ceftriaxone (CRO). Fluorescence intensity of crystal dispersion is significantly quenched with increasing concentrations of AA/CHL/CRO. Quenching occurs even in the presence of other substances. The assay is fast (5 s) and has a low detection limit (1.6 ppb for AA, 12 ppb for CHL and 3.9 ppb for CRO). The crystal still has a good quenching effect on AA/CHL/CRO after washing and using for five times. The response of the probe is related to the interplay between the MOF and analytes via energy absorption competition. Graphical abstractSchematic diagram of preparing Zn • (BA) • (BBI) and responding to target analytes. BA: 1,2-phenyldiacetic acid; BBI: 1,1'-(1,4-butanediyl)bis(imidazole); Zn • (BA) • (BBI): Crystal chemical formula.

Catalytic reactions within the cavity of coordination cages.

Natural enzymes catalyze reactions in their substrate-binding cavities, exhibiting high specificity and efficiency. In an effort to mimic the structure and functionality of enzymes, discrete coordination cages were designed and synthesized. These self-assembled systems have a variety of confined cavities, which have been applied to accelerate conventional reactions, perform substrate-specific reactions, and manipulate regio- and enantio-selectivity. Many coordination cages or cage-catalyst composites have achieved unprecedented results, outperforming their counterparts in different catalytic reactions. This tutorial review summarizes recent developments of coordination cages across three key approaches to coordination cage catalysis: (1) cavity promoted reactions, (2) embedding of active sites in the structure of the cage, and (3) encapsulation of catalysts within the cage. Special emphasis of the review involves (1) introduction of the structure and property of the coordination cage, (2) discussion of the catalytic pathway mediated by the cage, (3) elucidation of the structure-property relationship between the cage and the designated reaction. This work will summarize the recent progress in supramolecular catalysis and attract more researchers to pursue cavity-promoted reactions using discrete coordination cages.

Bottom-Up Assembly of a Highly Efficient Metal-Organic Framework for Cooperative Catalysis.

In this study, we demonstrate a bottom-up assembly of a monomeric copper complex and a two-dimensional (2-D) heterometallic metal-organic framework (MOF) from a carboxylate-functionalized tridentate Schiff base ligand and metal ions. The obtained 2-D MOF features a unique bimetallic copper center which is different from its monometallic precursor and acts as an efficient heterogeneous catalyst for the Friedel-Crafts reaction and Henry reaction. The MOF catalyst shows a remarkably superior activity compared to its homogeneous counterparts in a wide range of substrates. It is presumably ascribed to the dual activation of the substrates by the active bimetallic copper center confined in the MOF network, which is supported by the significant changes in catalytic activity at low catalyst/substrates ratios when using the 2-D MOF and its precursor as catalysts, respectively. Moreover, the MOF catalyst also shows an excellent stability and recyclability. Our work, therefore, provides a stepwise strategy to design a heterogeneous cooperative catalyst, by taking advantage of the modulated structure of MOF and tunable functionality of the tridentate Schiff base, with high performance in a variety of organic synthesis.

Gold/Chiral Amine Relay Catalysis Enables Asymmetric Synthesis of C2-Quaternary Indolin-3-ones.

A mild and effective strategy for the asymmetric synthesis of C2-quaternary indolin-3-ones from 2-alkynyl arylazides and ketones by gold/chiral amine relay catalysis is described. In this reaction, 2-alkynyl arylazides undergo gold-catalyzed cyclization, nucleophilic attack, and oxidation to form intermediate 2-phenyl-3H-indol-3-ones, followed by an l-proline-catalyzed asymmetric Mannich reaction with ketones, to afford corresponding products in satisfactory yields with excellent enantio- and diastereoselectivities.

Excavation method optimization and mechanical responses investigating of a shallow buried super large section tunnels: a case study in Zhejiang.

The construction of super large section (SLS) shallow buried tunnels involves challenges related to their large span, high flat rate, and complex construction process. Selecting an appropriate excavation method is crucial for ensuring stability, controlling costs, and managing the construction timeline. This study focuses on the selection of excavation methods and the mechanical responses of SLS tunnels in different types of surrounding rock. The research is based on the Yangjiashan tunnel project in Zhejiang Province, China, which is a four-line highway tunnel with a span of 21.3 m. Three sequential excavation methods were proposed and simulated using the three-dimensional finite difference method: the "upper first and lower later" side drift (SD) method, the central diaphragm method, and the top heading and bench (HB) method. The mechanical response characteristics of tunnel construction under these methods were investigated, including rock deformation, rock pressure, and the internal forces acting on the primary support. By comparing the performance of the three construction methods in rock masses of Grades III to V, the study aimed to determine the optimal construction method for SLS tunnels considering factors such as safety, cost, and schedule. Field tests were conducted to evaluate the effectiveness of the optimized construction scheme. The results of the field monitoring indicated that the "upper first and lower later" SD method in Grade V rock mass and the HB method in Grade III to IV rock mass are feasible and cost-effective under certain conditions. The research findings provide valuable insights for the design and construction of SLS tunnels in complex conditions, serving as a reference for engineers and project managers.

Mesoporous metal-organic framework materials.

Metal-organic frameworks (MOFs) have emerged as a new type of porous materials for diverse applications. Most open MOFs reported to date are microporous (pore sizes <2 nm), and only a small fraction of MOFs with ordered mesoscale domains (2-50 nm) is reported. This tutorial review covers recent advances in the field of mesoporous MOFs (mesoMOFs), including their design and synthesis, porosity activation and surface modification, and potential applications in storage and separation, catalysis, drug delivery and imaging. Their specificities are dependent on the pore shape, size, and chemical environments of the cages or channels. The relationship between the structures and functions is discussed. The future outlook for the field is discussed in the context of current challenges in applications of mesoporous materials.

The Two-Component System CpxRA Affects Antibiotic Susceptibility and Biofilm Formation in Avian Pathogenic Escherichia coli.

Avian pathogenic Escherichia coli (APEC) is one of the common extraintestinal infectious disease pathogens in chickens, geese, and other birds. It can cause a variety of infections, and even the death of poultry, causing enormous economic losses. However, the misuse and abuse of antibiotics in the poultry industry have led to the development of drug resistance in the gut microbes, posing a challenge for the treatment of APEC infections. It has been reported that the CpxRA two-component system has an effect on bacterial drug resistance, but the specific regulatory mechanism remains unclear. In this study, the regulatory mechanism of CpxRA on APEC biofilm formation and EmrKY efflux pump was investigated. The cpxRA knockout strain of E. coli APEC40 was constructed, and the molecular regulatory mechanism of CpxR on biofilms and efflux pump-coding genes were identified by biofilm formation assays, drug susceptibility test, real-time reverse transcription quantitative PCR, and electrophoretic mobility shift assay (EMSA). The results indicated that CpxR can directly bind to the promoter region of emrKY and negatively regulate the sensitivity of bacteria to ofloxacin and erythromycin. These results confirm the important regulatory role of the CpxRA two-component system under antibiotic stress in APEC.

Research progress on the circRNA­mediated regulation of tumor angiogenesis through ceRNA mechanisms (Review).

Tumors are one of the most common fatal diseases worldwide and pose a severe threat to human health. Effective tumor prevention and treatment strategies are persistent challenges in the medical community. Angiogenesis plays a critical role in and is the basis for tumor development and metastasis. Circular RNAs (circRNAs) are novel single­stranded covalently closed RNA molecules that are widely expressed in tumors due to their structural specificity and conservation. circRNAs affect angiogenesis by functioning as microRNA sponges to regulate vascular endothelial growth factor­related pathways, thereby participating in various stages of tumor growth, invasion and proliferation. The present review summarizes the involvement of circRNAs in the regulation of tumor angiogenesis through competing endogenous RNA mechanisms, with a particular focus on the regulatory role of circRNAs in tumor angiogenesis in various systems. It is considered that circRNAs have great potential for use as tumor diagnostic markers and anti­angiogenic therapies, and are thus worthy of further research and exploration.

Gold-Catalyzed Cascade Reaction of 2-Alkynyl Aryl Azides with Enecarbamates for Direct Synthesis of α-(3-Indolyl)ketones.

α-(3-Indolyl)ketones are essential building blocks for the generation of biologically active molecules. We described a new method for the direct assembly of α-(3-indolyl)ketones through the cascade reaction of 2-alkynyl aryl azides with enecarbamates, in which the in situ generated α-imino gold carbene intermediate was trapped by enecarbamate to achieve umpolung reactivity of indole at the 3-position.

Metallic W/WO2 solid-acid catalyst boosts hydrogen evolution reaction in alkaline electrolyte.

The lack of available protons severely lowers the activity of alkaline hydrogen evolution reaction process than that in acids, which can be efficiently accelerated by tuning the coverage and chemical environment of protons on catalyst surface. However, the cycling of active sites by proton transfer is largely dependent on the utilization of noble metal catalysts because of the appealing electronic interaction between noble metal atoms and protons. Herein, an all-non-noble W/WO2 metallic heterostructure serving as an efficient solid-acid catalyst exhibits remarkable hydrogen evolution reaction performance with an ultra-low overpotential of -35 mV at -10 mA/cm2 and a small Tafel slope (-34 mV/dec), as well as long-term durability of hydrogen production (>50 h) at current densities of -10 and -50 mA/cm2 in alkaline electrolyte. Multiple in situ and ex situ spectroscopy characterizations combining with first-principle density functional theory calculations discover that a dynamic proton-concentrated surface can be constructed on W/WO2 solid-acid catalyst under ultra-low overpotentials, which enables W/WO2 catalyzing alkaline hydrogen production to follow a kinetically fast Volmer-Tafel pathway with two neighboring protons recombining into a hydrogen molecule. Our strategy of solid-acid catalyst and utilization of multiple spectroscopy characterizations may provide an interesting route for designing advanced all-non-noble catalytic system towards boosting hydrogen evolution reaction performance in alkaline electrolyte.

Genes associated with desiccation stress in foodborne Staphylococcus aureus as revealed by transposon insertion mutagenesis.

Staphylococcus aureus (S. aureus) is an opportunistic foodborne pathogen whose survival in food processing environments may be associated with its tolerance to desiccation. However, the molecular mechanisms involved in desiccation stress have received little attention in S. aureus. Here, some potential genes related to desiccation stress were determined in S. aureus by the transposon random mutagenesis approach. Eight mutants with different mutant sites who showed lower survival rates compared to wild-type (WT) strain RMSA24 under desiccation stress were successfully screened from a mutant library (n = 3,154). The eight mutation sites are identified as potential genes of U32 family peptidase, CHAP domain-containing protein, YdcF family protein, RNA polymerase sigma factor, EVE domain-containing protein, acetyltransferase, LPXTG-anchored DUF1542 repeat protein FmtB, and CvpA family protein, which haven't been reported as the desiccation-tolerant related genes. We found that the growth rates and biofilm formation abilities of these mutants were not significantly affected, indicating that their reduced survival rates under desiccation stress not dependent on reduced growth rates and biofilm formation abilities. Under desiccation stress, the expression levels of the three mutated genes were up-regulated and the four mutated genes were down-regulated in the WT strain, implying that these genes may play different roles in S. aureus to adapt to desiccation stress conditions. The study reveals valuable information for the control of S. aureus in low water activity foods and their production environments.

CodY: An Essential Transcriptional Regulator Involved in Environmental Stress Tolerance in Foodborne Staphylococcus aureus RMSA24.

Staphylococcus aureus (S. aureus), as the main pathogen in milk and dairy products, usually causes intoxication with vomiting and various kinds of inflammation after entering the human body. CodY, an important transcriptional regulator in S. aureus, plays an important role in regulating metabolism, growth, and virulence. However, little is known about the role of CodY on environmental stress tolerance. In this research, we revealed the role of CodY in environmental stress tolerance in foodborne S. aureus RMSA24. codY mutation significantly reduced the tolerance of S. aureus to desiccation and oxidative, salt, and high-temperature stresses. However, S. aureus was more tolerant to low temperature stress due to mutation of codY. We found that the expressions of two important heat shock proteins-GroEL and DanJ-were significantly down-regulated in the mutant codY. This suggests that CodY may indirectly regulate the high- and low-temperature tolerance of S. aureus by regulating the expressions of groEL and danJ. This study reveals a new mechanism of environmental stress tolerance in S. aureus and provides new insights into controlling the contamination and harm caused by S. aureus in the food industry.

Asymmetric Double Oxidative [3 + 2] Cycloaddition for the Synthesis of CF3-Containing Spiro[pyrrolidin-3,2'-oxindole].

An asymmetric double oxidative [3 + 2] cycloaddition is reported. Oxidation of 3-((2,2,2-trifluoroethyl)amino)indolin-2-ones and ß-aryl-substituted aldehydes simultaneously and subsequent asymmetric cycloaddition in the presence of the chiral amino catalyst generated highly functionalized chiral CF3-containing spiro[pyrrolidin-3,2'-oxindole] with four contiguous stereocenters stereoselectively, which is characterized by directly constructing two C-C bonds from four C(sp3)-H bonds. This new method features mild conditions, broad substrate scope, and excellent functional group compatibility.

A novel gdmH-related gene, ghl, involved in environmental stress tolerance and vancomycin susceptibility in milk-derived Staphylococcus aureus.

Staphylococcus aureus is one of the main microorganisms that contaminate dairy products and pickled foods, and has a great impact on economy and human health. GdmH-related proteins, as important functional units widely present in Staphylococcus species, have not been reported in S. aureus so far. In this study, we identified a gdmH-related gene, named ghl. We found that mutation of ghl gene could decrease the tolerance of environmental stresses (heat, desiccation, salt and hydrogen peroxide) of S. aureus and enhanced the capacities of biofilm formation. In addition, the ghl mutant was more sensitive to vancomycin on CAMHB solid plates but more resistant to vancomycin in CAMHB liquid medium compared to wild type RMSA24. These results indicated that ghl is an important factor to respond to environmental stress in foodborne S. aureus. This paper for the first time reported that a GdmH-related protein plays an important role in environmental tolerance, providing a new direction for the follow-up study of GdmH-related proteins, as well as a potential target gene for further research on the tolerance mechanism of Staphylococcus aureus in food processing and the control of biofilm formation.