RESUMEN
Per- and polyfluoroalkyl substances (PFAS) are a huge group of anthropogenic chemicals with unique properties that are used in countless products and applications. Due to the high stability of their C-F bonds, PFAS or their transformation products (TPs) are persistent in the environment, leading to ubiquitous detection in various samples worldwide. Since PFAS are industrial chemicals, the availability of authentic PFAS reference standards is limited, making non-target screening (NTS) approaches based on high-resolution mass spectrometry (HRMS) necessary for a more comprehensive characterization. NTS usually is a time-consuming process, since only a small fraction of the detected chemicals can be identified. Therefore, efficient prioritization of relevant HRMS signals is one of the most crucial steps. We developed PFΔScreen, a Python-based open-source tool with a simple graphical user interface (GUI) to perform efficient feature prioritization using several PFAS-specific techniques such as the highly promising MD/C-m/C approach, Kendrick mass defect analysis, diagnostic fragments (MS2), fragment mass differences (MS2), and suspect screening. Feature detection from vendor-independent MS raw data (mzML, data-dependent acquisition) is performed via pyOpenMS (or custom feature lists) with subsequent calculations for prioritization and identification of PFAS in both HPLC- and GC-HRMS data. The PFΔScreen workflow is presented on four PFAS-contaminated agricultural soil samples from south-western Germany. Over 15 classes of PFAS (more than 80 single compounds with several isomers) could be identified, including four novel classes, potentially TPs of the precursors fluorotelomer mercapto alkyl phosphates (FTMAPs). PFΔScreen can be used within the Python environment and is easily automatically installable and executable on Windows. Its source code is freely available on GitHub ( https://github.com/JonZwe/PFAScreen ).
RESUMEN
Soil contaminations with per- and polyfluoroalkyl substances (PFAS) are of great concern due to their persistence, leading to continuous, long-term groundwater contamination. A composite sample from contaminated agricultural soil from northwestern Germany (Brilon-Scharfenberg, North Rhine-Westphalia) was investigated in depth with nontarget screening (NTS) (Kendrick mass defect and MS2 fragment mass differences with FindPFΔS). Several years ago, selected PFCAs and PFSAs were identified on this site by detection in nearby surface and drinking water. We identified 10 further PFAS classes and 7 C8-based PFAS (73 single PFAS) previously unknown in this soil including some novel PFAS. All PFAS classes except for one class comprised sulfonic acid groups and were semi-quantified with PFSA standards from which â¼97% were perfluorinated and are not expected to be degradable. New identifications made up >75% of the prior known PFAS concentration, which was estimated to >30 µg/g. Pentafluorosulfanyl (-SF5) PFSAs are the dominant class (â¼40%). Finally, the soil was oxidized with the direct TOP (dTOP) assay, revealing PFAA precursors that were covered to a large extent by identified H-containing PFAS and additional TPs (perfluoroalkyl diacids) were detected after dTOP. In this soil, however, dTOP + target analysis covers <23% of the occurring PFAS, highlighting the importance of NTS to characterize PFAS contaminations more comprehensively.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Fluorocarburos/análisis , Contaminantes Químicos del Agua/análisis , Contaminación Ambiental/análisis , Ácidos Sulfónicos/análisis , SueloRESUMEN
Non-target screening (NTS) based on high-resolution mass spectrometry (HRMS) is necessary to comprehensively characterize per- and polyfluoroalkyl substances (PFAS) in environmental, biological, and technical samples due to the very limited availability of authentic PFAS reference standards. Since in trace analysis, MS/MS information is not always achievable and only selected PFAS are present in homologous series, further techniques to prioritize measured HRMS data (features) according to their likelihood of being PFAS are highly desired due to the importance of efficient data reduction during NTS. Kaufmann et al. (J AOAC Int, 2022) presented a very promising approach to separate selected PFAS from sample matrix features by plotting the mass defect (MD) normalized to the number of carbons (MD/C) vs. mass normalized to the number of C (m/C). We systematically evaluated the advantages and limitations of this approach by using ~ 490,000 chemical formulas of organic chemicals (~ 210,000 PFAS, ~ 160,000 organic contaminants, and 125,000 natural organic matter compounds) and calculating how efficiently, and especially which, PFAS can be prioritized. While PFAS with high fluorine content (approximately: F/C > 0.8, H/F < 0.8, mass percent of fluorine > 55%) can be separated well, partially fluorinated PFAS with a high hydrogen content are more difficult to prioritize, which we discuss for selected PFAS. In the MD/C-m/C approach, even compounds with highly positive MDs above 0.5 Da and hence incorrectly assigned to negative MDs can still be separated from true negative mass defect features by the normalized mass (m/C). Furthermore, based on the position in the MD/C-m/C plot, we propose the estimation of the fluorine fraction in molecules for selected PFAS classes. The promising MD/C-m/C approach can be widely used in PFAS research and routine analysis. The concept is also applicable to other compound classes like iodinated compounds.
RESUMEN
The limited availability of analytical reference standards makes non-target screening approaches based on high-resolution mass spectrometry increasingly important for the efficient identification of unknown PFAS (per- and polyfluoroalkyl substances) and their TPs. We developed and optimized a vendor-independent open-source Python-based algorithm (FindPFΔS = FindPolyFluoroDeltas) to search for distinct fragment mass differences in MS/MS raw data (.ms2-files). Optimization with PFAS standards, two pre-characterized paper and soil samples (iterative data-dependent acquisition), revealed Δ(CF2)n, ΔHF, ΔCnH3F2n-3, ΔCnH2F2n-4, ΔCnHF2n-5, ΔCnF2nSO3, ΔCF3, and ΔCF2O as relevant and selective fragment differences depending on applied collision energies. In a PFAS standard mix, 94% (36 of 38 compounds from 10 compound classes) could be found by FindPFΔS. The use of fragment differences was applicable to a wide range of PFAS classes and appears as a promising new approach for PFAS identification. The influence of mass tolerance and intensity threshold on the identification efficiency and on the detection of false positives was systematically evaluated with the use of selected HR-MS2-spectra (20,998) from MassBank. To this end, with the use of FindPFΔS, we could identify different unknown PFAS homologues in the paper extracts. FindPFΔS is freely available as both Python source code on GitHub (https://github.com/JonZwe/FindPFAS) and as an executable windows application (https://doi.org/10.5281/zenodo.6797353) with a graphical user interface on Zenodo.
Asunto(s)
Fluorocarburos , Espectrometría de Masas en Tándem , Algoritmos , Minería de Datos , Fluorocarburos/análisis , Programas InformáticosRESUMEN
To unravel the complexity of per- and polyfluoroalkyl substances (PFAS) in products and environmental samples, sum parameters that provide relevant information on chemical characteristics are necessary since not all PFAS can be captured by target analysis in case of missing reference standards or if they are not extractable or amenable to the analytical method. Therefore, we evaluated photocatalysis (UV/TiO2) as a further total oxidizable precursor approach (PhotoTOP) to characterize perfluoroalkyl acid precursors via their conversion to perfluoroalkyl carboxylic acids (PFCAs). Photocatalysis has the advantage that no salts are needed, allowing direct injection with liquid chromatography-mass spectrometry without time-consuming and potentially discriminating sample cleanup. OH radicals were monitored with OH probes to determine the reactivity. For eight different precursors (diPAPs, FTSAs, FTCAs, N-EtFOSAA, PFOSA), mass balance was achieved within 4 h of oxidation, and also, in the presence of matrix, complete conversion was possible. The PhotoTOP was able to predict the precursor chain length of known and here newly identified precursors qualitatively when applied to two PFAS-coated paper samples and technical PFAS mixtures. The length of the perfluorinated carbon chain (n) was mostly conserved in the form of PFCAs (n-1) with only minor fractions of shorter-chain PFCAs. Finally, an unknown fabric sample and a polymer mixture (no PFAS detectable in extracts) were oxidized, and the generated PFCAs indicated the occurrence of side-chain fluorinated polymers.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Monitoreo del Ambiente/métodos , Fluorocarburos/análisis , Ácidos Carboxílicos/análisis , Contaminantes Químicos del Agua/químicaRESUMEN
High per- and polyfluorinated alkyl substance (PFAS) concentrations have been detected in agricultural soils in Southwest Germany. Discharges of PFAS-contaminated paper sludge and compost are suspected to be the cause of the contamination. Perfluorinated carboxylic acids (PFCAs) have been detected also in groundwater, drinking water, and plants in this area. Recently, previously unknown compounds have been identified by high-resolution mass spectrometry (HRMS). Major contaminants were polyfluorinated dialkylated phosphate esters (diPAPs) and N-ethyl perfluorooctane sulfonamide ethanol-based phosphate diester (diSAmPAP). In this study, HRMS screening for PFAS was applied to 14 soil samples from the contaminated area and 14 impregnated paper samples which were from a similar period than the contamination. The paper samples were characterized by diPAPs (from 4:2/6:2 to 12:2/12:2), fluorotelomer mercapto alkyl phosphates (FTMAPs; 6:2/6:2 to 10:2/10:2), and diSAmPAP. In soil samples, diPAPs and their transformation products (TPs) were the major contaminants, but also FTMAPs, diSAmPAP, and their TPs occurred. The distribution patterns of the carbon chain lengths of the precursor PFAS in soil samples were shown to resemble those in paper samples. This supports the hypothesis that paper sludge is a major source of contamination. The presence of major degradation products like PFCAs, FTSAs, or PFOS and their distribution of carbon chain lengths indicate the activity of biotic or abiotic degradation processes and selective leaching processes from the upper soil horizons.
RESUMEN
Polyfluoroalkyl phosphate diesters (diPAPs) are widely used for paper and cardboard impregnation and discharged via waste streams from production processes and consumer products. To improve the knowledge about the environmental fate of diPAPs, electrochemical oxidation (EO) was used to characterize the transformation pathways and reaction kinetics. 6:2 diPAP was transformed electrochemically to perfluorocarboxylic acids (C5-C7 PFCAs) and two intermediates (6:2 fluorotelomer carboxylic acid, FTCA, and 6:2 fluorotelomer unsaturated carboxylic acid, FTUCA). EO of potential intermediates 6:2 monoPAP and 6:2 fluorotelomer alcohol (FTOH) showed similar transformation products but with different ratios. We show that 6:2 diPAP is initiated by OH radical (â¢OH) reactions, as evidenced by the measured steady-state concentrations of â¢OH with the probe molecule terephthalic acid, quenching experiments, and pH dependency of the reaction. PFHpA was the main product of 6:2 diPAP oxidation, and it was formed in a pseudo-first-order reaction for which a bimolecular rate constant was estimated to be kOâ¢H,diPAPformPFHpA = 9.4(±1.4) × 107 M-1 s-1 by an initial rate approach. This can be utilized to estimate the environmental half-life of 6:2 diPAP for the reaction with â¢OH and the formation kinetics of persistent PFCAs.
RESUMEN
For a better process understanding of in-stream attenuation of trace organic contaminants (TrOCs), quantitative comparisons between field studies under different environmental conditions and controlled laboratory experiments are important to separate different processes. However, this is hampered by the challenge to transfer kinetics from the laboratory to different field conditions due to the lack of good quantitative measures to account for different boundary conditions. For phototransformation, in situ light conditions in a river are difficult to determine because light is reduced, for instance, by absorption, scattering on suspended particles, and shading effects. In this study, we present an approach to separate photochemical from non-photochemical diurnal in-stream attenuation based on rate constants relative to diclofenac, as a reference compound, to account for the difference in the in situ light conditions combined with laboratory experiments. 12 out of 45 detected target TrOCs showed a diurnal attenuation at a selected river stretch. A non-photochemical process, potentially biotransformation, was responsible for the diurnal attenuation of bisoprolol, metoprolol, O-desmethylvenlafaxine, tramadol, and venlafaxine. Attenuation of amisulpride, flufenamic acid, hydrochlorothiazide, naproxen, and xipamide can be quantitatively explained by phototransformation, partially for sotalol. Attenuation rate constants of hydrochlorothiazide at different field sites from this study and from published data range over 2 orders of magnitude. Differences can be quantitatively explained by different light exposures but not by water chemical parameters.
Asunto(s)
Ríos , Contaminantes Químicos del Agua , Biotransformación , Diclofenaco , Procesos Fotoquímicos , Clorhidrato de Venlafaxina , Contaminantes Químicos del Agua/análisisRESUMEN
Fluoxetine has been recognized as one of the most toxic pharmaceuticals in the aquatic environment. Since there is growing evidence that the toxic potential of fluoxetine in surface waters is markedly influenced by its own metabolism in aquatic species, this study investigated the biotransformation of fluoxetine in the zebrafish embryo - an aquatic model organism of intermediate complexity. Zebrafish embryos were exposed to 0.1, 1.0, 10, 50, and 5000 µg/L of fluoxetine from 48 to 120 h post-fertilization (hpf), and the accumulation of fluoxetine and its metabolites was analyzed over time. Additionally, depuration of fluoxetine and its metabolites from 96 to 120 hpf was investigated, and autoinhibitory effects of fluoxetine on phase I biotransformation were analyzed. Exposure to 5000 µg/L fluoxetine resulted in elevated 7-ethoxyresorufin-O-deethylase (EROD) activity of cytochrome P450 enzymes and continuous accumulation of fluoxetine and 11 fluoxetine metabolites. Embryos exposed to 10 and 50 µg/L fluoxetine were able to reduce fluoxetine accumulation from 94 to 120 hpf. During depuration, accumulation of fluoxetine and most metabolites was clearly reduced, and biotransformation shifted in favor of norfluoxetine, the primary fluoxetine metabolite in humans. Findings demonstrated that norfluoxetine is the only metabolite of fluoxetine that accumulates in zebrafish embryos at environmentally relevant exposure scenarios.
Asunto(s)
Contaminantes Químicos del Agua , Pez Cebra , Animales , Embrión no Mamífero , Fluoxetina/análogos & derivados , HumanosRESUMEN
The application of contaminated paper sludge on arable land in southwest Germany caused the occurrence of a broad range of poly- and perfluoroalkyl substances (PFASs) on soil. Recently, the dead-end transformation products (TPs) perfluorooctanoic acid and perfluorooctanesulfonic acid were detected in groundwater and drinking water. The precursors and other transformation products mostly remained unknown. Therefore, HRMS screening by Kendrick mass analysis and assignment of homologous series in combination with suspect screening were applied to identify original PFASs and their TPs in four different soil samples from sites where contaminated paper sludge was applied. In total, twelve compound classes comprising more than 61 PFASs could be fully or tentatively identified. The data reveal that contamination mainly originates from polyfluorinated dialkylated phosphate esters (from 4:2/6:2 to 12:2/14:2), N-ethyl perfluorooctane sulfonamide ethanol-based phosphate diesters (only C8/C8) and transformation products of these precursors. Contamination patterns can be attributed to PFASs used for paper impregnation and can vary slightly from site to site. Graphical abstract.
RESUMEN
The present study investigates the transformation of the antidepressant fluoxetine (FLX) by photo- and biodegradation and shows similarities and differences in transformation products (TPs). TPs were identified using LC-high-resolution mass spectrometry with positive and negative electrospray ionization. In a sunlight simulator, photodegradation was carried out using ultrapure water (pH 6, 8, and 10) and surface water (pH 8) to study the effect of direct and indirect photolysis, respectively. The well-known metabolite norfluoxetine (NFLX) proved to be a minor TP in photolysis (≤2% of degraded FLX). In addition, 26 TPs were detected, which were formed by cleavage of the phenolether bond ( O-dealkylation) which primarily formed 3-(methylamino)-1-phenyl-1-propanol (TP 166) and 4-(trifluoromethyl)phenol, by hydroxylation of the benzyl moiety, by CF3 substitution to benzoic aldehyde/acid, and by adduct formation at the amine group ( N-acylation with aldehydes and carboxylic acids). Higher pH favors the neutral species of FLX and the neutral/anionic species of primary TPs and, therefore, photodegradation. In zebrafish embryos, the bioconcentration factor of FLX was found to be 110, and about 1% of FLX taken up by the embryos was transformed to NFLX. Seven metabolites known from photodegradation and formed by hydrolysis, hydroxylation, and N-acylation as well as three new metabolites formed by N-hydroxylation, N-methylation, and attachment of an amine group were identified in zebrafish embryos. The study highlights the importance of considering a broad range of TPs of FLX in fresh water systems and in ecotoxicity tests and to include TP formation in both environmental processes and metabolism in organisms.
Asunto(s)
Contaminantes Químicos del Agua , Pez Cebra , Animales , Fluoxetina , Fotólisis , AguaRESUMEN
Worldwide, ozonation of secondary wastewater effluents is increasingly considered in order to decrease the load of organic contaminants before environmental discharge. However, despite the constantly growing knowledge of ozonation over the past few years, the characterization of transformation products (TPs) is still a major concern, particularly because such TPs might remain biologically active. It has been shown for selected tertiary amine pharmaceuticals that they react with ozone and form the corresponding N-oxides. This study therefore applies liquid chromatography-high resolution mass spectrometry (LC-HRMS) to assess the overall N-oxide formation during the pilot-scale ozonation of a secondary wastewater effluent from a major city in Germany. Sample analysis by LC-HRMS revealed the occurrence of 1,229 compounds, among which 853 were precursors attenuated by ozone and 165 were TPs. Further examination of precursors and TPs using Kendrick mass and Kendrick mass defect analysis revealed 34 pairs of precursors and products corresponding to a mono-oxygenation. Among these, 27 pairs (16% of all TPs) were consistent with N-oxides since the TP had a higher retention time than the precursor, a characteristic of these compounds. Using high resolution tandem mass spectrometry, 10 of these N-oxides could be identified and were shown to be stable during a subsequent filtration step.
Asunto(s)
Aguas Residuales/química , Contaminantes Químicos del Agua , Compuestos Orgánicos , Óxidos , Ozono/química , Eliminación de Residuos LíquidosRESUMEN
BACKGROUND: Trihalomethanes (THMs) in exhaled breath and trichloroacetic acid (TCAA) in urine are internal dose biomarkers of exposure to disinfection by-products (DBPs) in swimming pools. OBJECTIVE: We assessed how these biomarkers reflect the levels of a battery of DBPs in pool water and trichloramine in air, and evaluated personal determinants. METHODS: A total of 116 adults swam during 40min in a chlorinated indoor pool. We measured chloroform, bromodichloromethane, dibromochloromethane and bromoform in exhaled breath and TCAA in urine before and after swimming, trichloramine in air and several DBPs in water. Personal determinants included sex, age, body mass index (BMI), distance swum, energy expenditure, heart rate and 12 polymorphisms in GSTT1, GSTZ1 and CYP2E1 genes. RESULTS: Median level of exhaled total THMs and creatinine adjusted urine TCAA increased from 0.5 to 14.4µg/m(3) and from 2.5 to 5.8µmol/mol after swimming, respectively. The increase in exhaled brominated THMs was correlated with brominated THMs, haloacetic acids, haloacetonitriles, haloketones, chloramines, total organic carbon and total organic halogen in water and trichloramine in air. Such correlations were not detected for exhaled chloroform, total THMs or urine TCAA. Exhaled THM increased more in men, urine TCAA increased more in women, and both were affected by exercise intensity. Genetic variants were associated with differential increases in exposure biomarkers. CONCLUSION: Our findings suggest that, although affected by sex, physical activity and polymorphisms in key metabolizing enzymes, brominated THMs in exhaled breath could be used as a non-invasive DBP exposure biomarker in swimming pools with bromide-containing source waters. This warrants confirmation with new studies.
Asunto(s)
Desinfectantes/metabolismo , Ácido Tricloroacético/orina , Trihalometanos/metabolismo , Contaminantes Químicos del Agua/metabolismo , Adulto , Biomarcadores/metabolismo , Biomarcadores/orina , Desinfectantes/orina , Desinfección , Femenino , Humanos , Masculino , España , Natación , Piscinas , Contaminantes Químicos del Agua/orina , Adulto JovenRESUMEN
In this article, a dataset from a collaborative non-target screening trial organised by the NORMAN Association is used to review the state-of-the-art and discuss future perspectives of non-target screening using high-resolution mass spectrometry in water analysis. A total of 18 institutes from 12 European countries analysed an extract of the same water sample collected from the River Danube with either one or both of liquid and gas chromatography coupled with mass spectrometry detection. This article focuses mainly on the use of high resolution screening techniques with target, suspect, and non-target workflows to identify substances in environmental samples. Specific examples are given to emphasise major challenges including isobaric and co-eluting substances, dependence on target and suspect lists, formula assignment, the use of retention information, and the confidence of identification. Approaches and methods applicable to unit resolution data are also discussed. Although most substances were identified using high resolution data with target and suspect-screening approaches, some participants proposed tentative non-target identifications. This comprehensive dataset revealed that non-target analytical techniques are already substantially harmonised between the participants, but the data processing remains time-consuming. Although the objective of a "fully-automated identification workflow" remains elusive in the short term, important steps in this direction have been taken, exemplified by the growing popularity of suspect screening approaches. Major recommendations to improve non-target screening include better integration and connection of desired features into software packages, the exchange of target and suspect lists, and the contribution of more spectra from standard substances into (openly accessible) databases. Graphical Abstract Matrix of identification approach versus identification confidence.
Asunto(s)
Espectrometría de Masas/métodos , Agua/análisis , Cromatografía de Gases , Cromatografía LiquidaRESUMEN
The anaerobic microbial degradation of aromatic and heterocyclic compounds is a prevalent process in contaminated groundwater systems. The introduction of functional groups into the contaminant molecules often results in aromatic and heterocyclic and succinic acids. These metabolites can be used as indicators for prevailing degradation processes. Therefore, there is a strong interest in developing analytical methods for screening and identification of these metabolites. In this study, neutral loss scans (NLS) by liquid chromatography-electrospray ionization/tandem mass spectrometry with losses of CO2 (NL ∆m/z = 44) and C2H4(CO2)2 (NL ∆m/z = 116) were applied for the first time successfully to screen selectively for acidic and succinic metabolites of aromatic and heterocyclic contaminants in two fulvic acid fractions from a contaminated site and a downstream region of a tar oil-polluted groundwater. Identification of these preselected signals was performed by high-resolution mass spectrometry with a liquid chromatography-electrospray ionization quadrupole time-of-flight mass spectrometry instrument. High-resolution mass and mass fragmentation data were then compared with a list of known metabolites from a literature search or matched with chemical databases supported with in silico fragmentation. Based on authentic analytical standards, several compounds from NLS were identified (e.g., 4-hydroxy-3-methylbenzoic acid, benzylsuccinic acid, naphthyl-2-methylsuccinic acid, 2-carboxyindane, and 2-carboxybenzothiophene) and tentatively identified (e.g., benzofuranmethylsuccinic acid and dihydrocarboxybenzothiophene) as aromatic, phenolic, heterocyclic, and succinic acids. The acidic metabolites were found exclusively in the contaminated region of the aquifer which indicates active biodegradation processes and no relevant occurrence of acidic metabolites in the downstream region.
Asunto(s)
Ácidos/química , Benzopiranos/química , Monitoreo del Ambiente/métodos , Agua Subterránea/química , Contaminantes Químicos del Agua/química , Biodegradación Ambiental , Cromatografía Liquida , Sustancias Húmicas , Hidrocarburos/química , Compuestos Orgánicos/química , Reproducibilidad de los Resultados , Espectrometría de Masa por Ionización de Electrospray , Ácido Succínico/química , Espectrometría de Masas en Tándem , Agua/análisisRESUMEN
Per- and polyfluorinated substances (PFAS) are widely used industrial and household chemicals and occur on various contaminated field sites. To better understand their behavior on soils, spike experiments were performed with 6:2 diPAP (6:2 polyfluoroalkyl phosphate diester) on pure mineral phases (titanium dioxide, goethite and silicon dioxide) in aqueous suspensions under artificial sunlight. Further experiments were performed with uncontaminated soil and four precursor PFAS. Titanium dioxide (referenced as 100 %) showed the highest reactiveness to transform 6:2 diPAP to its primary metabolite 6:2 fluorotelomer carboxylic acid, followed by goethite with the addition of oxalate (4.7 %), silicon dioxide (1.7 %) and soil (0.0024 %). Experiments with four precursors [6:2 diPAP, 6:2 fluorotelomer mercapto alkyl phosphate (FTMAP), N-ethyl perfluorooctane sulfonamide ethanol-based phosphate diester (diSAmPAP), N-ethyl perfluorooctane sulfonamidoacetic acid (EtFOSAA)] on natural soils showed a transformation of all four precursors by simulated sunlight. The production of the primary intermediate from 6:2 FTMAP (6:2 FTSA, rate constant k = 2.7∗10-3h-1) was approximately 13-times faster than from 6:2 diPAP (6:2 FTCA, rate constant k = 1.9∗10-4h-1). EtFOSAA was completely decomposed within 48 h whereas only ~7 % diSAmPAP was transformed in the same time. The primary photochemical transformation product of diSAmPAP and EtFOSAA was PFOA, PFOS was not detected. The production rate constant of PFOA varied significantly between EtFOSAA (k = 0.01h-1) and diSAmPAP (k = 1.3∗10-3h-1). Photochemically produced PFOA consisted of branched and linear isomers and can therefore be used in source tracking. Experiments with different soils suggest that the oxidation of EtFOSAA to PFOA is expected to primarily be driven by hydroxyl radicals, whereas for the oxidation of EtFOSAA to further intermediates, another mechanism instead or in addition to the oxidation by hydroxyl radicals is responsible.
RESUMEN
Per- and polyfluoroalkyl substances (PFAS) are widely used for durable water-repellent finishing of different fabrics and textiles such as outdoor clothing, carpets, medical textiles and more. Existing PFAS extraction techniques followed by target analysis are often insufficient for detecting widely used side-chain fluorinated polymers (SFPs) that are barely or non-extractable. SFPs are typically copolymers consisting of a non-fluorinated backbone with perfluoroalkyl side-chains to obtain desired properties. We compared the accessible analytical information and performance of complementary techniques based on oxidation (dTOP and PhotoTOP assays), hydrolysis (THP assay), standard extraction, extractable organic fluorine (EOF), and total fluorine (TF) with five functional textiles and characterized 7 further textiles only by PhotoTOP oxidation. The results show that when applied directly to textile samples, dTOP and PhotoTOP oxidation and also hydrolysis (THP) are able to capture large fractions of TF in the form of perfluoroalkyl side-chains present in the textiles while methods relying on extracts (EOF, target and non-target analysis) yield much lower fractions of TF (e.g., factor â¼25-50 lower). The conversion of large fractions of the measured TF into PFCAs or FTOHs from fluorinated side chains is in contrast to previous studies. Concentrations ranged from Asunto(s)
Flúor
, Fluorocarburos
, Hidrólisis
, Textiles/análisis
, Polímeros de Fluorocarbono/análisis
, Polímeros de Fluorocarbono/química
, Polímeros
, Ácidos Carboxílicos/análisis
, Fluorocarburos/análisis
RESUMEN
The discovery of new disinfection by-products (DBPs) is still a rarely investigated research area in past studies. In particular, compared to freshwater pools, therapeutic pools with their unique chemical composition have rarely been investigated for novel DBPs. Here we have developed a semi-automated workflow that combines data from target and non-target screening, calculated and measured toxicities into a heat map using hierarchical clustering to assess the pool's overall potential chemical risk. In addition, we used complementary analytical techniques such as positive and negative chemical ionization to demonstrate how novel DBPs can be better identified in future studies. We identified two representatives of the haloketones (pentachloroacetone, and pentabromoacetone) and tribromo furoic acid detected for the first time in swimming pools. Non-target screening combined with target analysis and toxicity assessment may help to define risk-based monitoring strategies in the future, as required by regulatory frameworks for swimming pool operations worldwide.
Asunto(s)
Desinfectantes , Piscinas , Contaminantes Químicos del Agua , Desinfección/métodos , Desinfectantes/análisis , Contaminantes Químicos del Agua/química , AguaRESUMEN
BACKGROUND: The intersection of the topics of high-resolution mass spectrometry (HRMS) and per- and polyfluoroalkyl substances (PFAS) bring together two disparate and complex subjects. Recently non-targeted analysis (NTA) for the discovery of novel PFAS in environmental and biological media has been shown to be valuable in multiple applications. Classical targeted analysis for PFAS using LC-MS/MS, though growing in compound coverage, is still unable to inform a holistic understanding of the PFAS burden in most samples. NTA fills at least a portion of this data gap. OBJECTIVES: Entrance into the study of novel PFAS discovery requires identification techniques such as HRMS (e.g., QTOF and Orbitrap) instrumentation. This requires practical knowledge of best approaches depending on the purpose of the analyses. The utility of HRMS applications for PFAS discovery is unquestioned and will likely play a significant role in many future environmental and human exposure studies. METHODS/RESULTS: PFAS have some characteristics that make them standout from most other chemicals present in samples. Through a series of tell-tale PFAS characteristics (e.g., characteristic mass defect range, homologous series and characteristic fragmentation patterns), and case studies different approaches and remaining challenges are demonstrated. IMPACT STATEMENT: The identification of novel PFAS via non-targeted analysis using high resolution mass spectrometry is an important and difficult endeavor. This synopsis document will hopefully make current and future efforts on this topic easier to perform for novice and experienced alike. The typical time devoted to NTA PFAS investigations (weeks to months or more) may benefit from these practical steps employed.