Two-Dimensional Sulfonate-Functionalized Metal-Organic Framework Membranes for Efficient Lithium-Ion Sieving.

Two-dimensional (2D) membranes have shown promising potential for ion-selective separation but often suffer from the trade-off between permeability and selectivity. Herein, we report an ultrathin 2D sulfonate-functionalized metal-organic framework (MOF) membrane for efficient lithium-ion sieving. The narrow pores with angstrom precision in the MOF assist hydrated ions to partially remove the hydration shell, according to different hydration energies. The abundant sulfonate groups in the MOF channels serve as hopping sites for fast lithium-ion transport, contributing to a high Li-ion permeability. Then, the difference in affinity of the Li+, Na+, K+, and Mg2+ ions to the terminal sulfonate groups further enhances the Li-ion selectivity. The reported ultrathin MOF membrane overcomes the trade-off between permeability and selectivity and opens up a new avenue for highly permselective membranes.

Ion Transport Behavior in van der Waals Gaps of 2D Materials.

2D materials, with advantages of atomic thickness and novel physical/chemical characteristics, have emerged as the vital building blocks for advanced lamellar membranes which possess promising potential in energy storage, ion separation, and catalysis. When 2D materials are stacked together, the van der Waals (vdW) force generated between adjacent layered nanosheets induces the construction of an ordered lamellar membrane. By regulating the interlayer spacing down to the nanometer or even sub-nanometer scale, rapid and selective ion transport can be achieved through such vdW gaps. The further improvement and application of qualified 2D materials-based lamellar membranes (2DLMs) can be fulfilled by the rational design of nanochannels and the intelligent micro-environment regulation under different stimuli. Focusing on the newly emerging advances of 2DLMs, in this review, the common top-down and bottom-up synthesis approaches of 2D nanosheets and the design strategy of functional 2DLMs are briefly introduced. Two essential ion transport mechanisms within vdW gaps are also involved. Subsequently, the responsive 2DLMs based on different types of external stimuli and their unique applications in nanofluid transport, membrane-based filters, and energy storage are presented. Based on the above analysis, the existing challenges and future developing prospects of 2DLMs are further proposed.

Ultrafast 2D Nanosheet Assembly via Spontaneous Spreading Phenomenon.

In 2D materials, a key engineering challenge is the mass production of large-area thin films without sacrificing their uniform 2D nature and unique properties. Here, it is demonstrated that a simple fluid phenomenon of water/alcohol solvents can become a sophisticated tool for self-assembly and designing organized structures of 2D nanosheets on a water surface. In situ, surface characterizations show that water/alcohol droplets of 2D nanosheets with cationic surfactants exhibit spontaneous spreading of large uniform monolayers within 10 s. Facile transfer of the monolayers onto solid or flexible substrates results in high-quality mono- and multilayer films with high coverages (>95%) and homogeneous electronic/optical properties. This spontaneous spreading is quite general and can be applied to various 2D nanosheets, including metal oxides, graphene oxide, h-BN, MoS2, and transition metal carbides, enabling on-demand smart manufacture of large-size (>4 inchϕ) 2D nanofilms and free-standing membranes.

Ultrathin and Biodegradable Bismuth Oxycarbonate Nanosheets with Massive Oxygen Vacancies for Highly Efficient Tumor Therapy.

Nanomaterials doped with high atom number elements can improve the efficacy of cancer radiotherapy, but their clinical application faces obstacles, such as being difficult to degrade in vivo, or still requiring relatively high radiation dose. In this work, a bismuth oxycarbonate-based ultrathin nanosheet with the thickness of 2.8 nm for safe and efficient tumor radiotherapy under low dose of X-ray irradiation is proposed. The high oxygen content (62.5% at%) and selective exposure of the facets of ultrathin 2D nanostrusctures facilitate the escape of large amounts of oxygen atoms on bismuth nanosheets from surface, forming massive oxygen vacancies and generating reactive oxygen species that explode under the action of X-rays. Moreover, the exposure of almost all atoms to environmental factors and the nature of oxycarbonates makes the nanosheets easily degrade into biocompatible species. In vivo studies demonstrate that nanosheets could induce apoptosis in cancer cells after low dose of X-ray irradiation without causing any damage to the liver or kidney. The tumor growth inhibition effect of radiotherapy increases from 49.88% to 90.76% with the help of bismuth oxycarbonate nanosheets. This work offers a promising future for nanosheet-based clinical radiotherapies of malignant cancers.

Tunable 2D Conjugated Porous Organic Polymer Films for Precise Molecular Nanofiltration and Optoelectronics.

Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.

Exfoliated Magnesium Diboride (MgB2) Nanosheets as Solid Fuels.

Magnesium diboride (MgB2) has been explored as an alternative fuel to boron (B) due to its high energy density and the additive effect of magnesium (Mg) to promote B combustion. However, the primary oxidation of MgB2 does not occur unless it decomposes at a high temperature (830 °C), which makes ignition difficult and the reaction slow. Recently, two-dimensional (2D) exfoliated MgB2 nanosheets have attracted increasing attention due to their unique properties and potential applications in various fields. In this study, we investigate the potential of 2D exfoliated MgB2 nanosheets as solid fuels for overcoming the challenges of MgB2 combustion. We analyzed their oxidation behavior and energetic performance through material characterization and combustion tests under slow- and fast-heating conditions and compared their performance with those of bulk MgB2, B nanoparticles, and a B/Mg nanoparticle mixture. This study highlights the potential of MgB2 nanosheets as promising solid fuels with superior energetic properties.

Ultrahigh Energy Storage in 2D High-κ Perovskites.

Dielectric capacitors have greater power densities than batteries, and, unlike batteries, they do not utilize chemical reactions during cycling. Thus, they can become ideal, safe energy storage devices. However, dielectric capacitors yield rather low energy densities compared with other energy storage devices such as batteries and supercapacitors. Here, we present a rational approach for designing ultrahigh energy storage capacitors using two-dimensional (2D) high-κ dielectric perovskites (Ca2Nam-3NbmO3m+1; m = 3-6). Individual Ca2Nam-3NbmO3m+1 nanosheets exhibit an ultrahigh dielectric strength (638-1195 MV m-1) even in the monolayer form, which exceeds those of conventional dielectric materials. Multilayer stacked nanosheet capacitors exhibit ultrahigh energy densities (174-272 J cm-3), high efficiencies (>90%), excellent reliability (>107 cycles), and temperature stability (-50-300 °C); the maximum energy density is much higher than those of conventional dielectric materials and even comparable to those of lithium-ion batteries. Enhancing the energy density may make dielectric capacitors more competitive with batteries.

Layer-Controlled Perovskite 2D Nanosheet Interlayer for the Energy Storage Performance of Nanocomposites.

Polymer-based nanocomposites are desirable materials for next-generation dielectric capacitors. 2D dielectric nanosheets have received significant attention as a filler. However, randomly spreading the 2D filler causes residual stresses and agglomerated defect sites in the polymer matrix, which leads to the growth of an electric tree, resulting in a more premature breakdown than expected. Therefore, realizing a well-aligned 2D nanosheet layer with a small amount is a key challenge; it can inhibit the growth of conduction paths without degrading the performance of the material. Here, an ultrathin Sr1.8 Bi0.2 Nb3 O10 (SBNO) nanosheet filler is added as a layer into poly(vinylidene fluoride) (PVDF) films via the Langmuir-Blodgett method. The structural properties, breakdown strength, and energy storage capacity of a PVDF and multilayer PVDF/SBNO/PVDF composites as a function of the thickness-controlled SBNO layer are examined. The seven-layered (only 14 nm) SBNO nanosheets thin film can sufficiently prevent the electrical path in the PVDF/SBNO/PVDF composite and shows a high energy density of 12.8 J cm-3 at 508 MV m-1 , which is significantly higher than that of the bare PVDF film (9.2 J cm-3 at 439 MV m-1 ). At present, this composite has the highest energy density among the polymer-based nanocomposites under the filler of thin thickness.

Microfluidic-Assisted Self-Assembly of 2D Nanosheets toward in situ Generation of Robust Nanofiber Film.

Methods allow the enhancement of nanofibers via self-assembly are potentially important for new disciplines with many advantages, including multi-anchor interaction, intrinsic mechanical properties and versatility. Herein, a microfluidic-assisted self-assembly process to construct hydroxyl functionalized boron nitride nanosheets (OH-BNNS)/graphene oxide (GO)/thermoplastic polyurethane (TPU) composite nanofiber film, in which stable and precisely controlled self-assembly is fulfilled by the confined ultra-small-volume chip is demonstrated. Multiple fine structural analyses alongside with the density-functional theory (DFT) calculations are implemented to confirm the synergistic effect of noncovalent interactions (hydrogen bonding interaction, π - π stacking interaction, and van der Waals attraction) plays a critical role in the robust micro-structure and a massive 700% enhancement of mechanical strength via adding only 0.3 wt% OH-BNNS and GO. Importantly, profiled from broadband optical absorption ability, robust mechanical properties and outstanding flexibility, the self-assembled 3D OH-BNNS/GO/TPU nanofiber film reveals an adorable evaporation rate of 4.04 kg m-2  h-1 under one sun illumination with stable energy transfer efficiency (93.2%) by accompanying hydrogen bonding interaction. This microfluidic-assisted self-assembly strategy will provide a constructive entry point for the rational design of nanofibers and beyond.

2D vanadium disulfide nanosheets assisted ultrasensitive, rapid, and label-free electrochemical quantification of cancer biomarker (MMP-2).

Cancer is one of the most tormenting global health burdens reporting high mortality and morbidity worldwide. Matrix metalloproteinase 2 (MMP-2) protein has elevated expression for most types of cancers, including prostate and breast cancer. Therefore, accurate and specific detection of MMP-2 biomarker is crucial for screening, treatment, and prognosis of related cancer. In this work, we have proposed a label-free electrochemical biosensor for the detection of MMP-2 protein. This biosensor was fabricated using hydrothermally synthesized vanadium disulfide (VS2) nanosheets with monoclonal anti-MMP2 antibodies biofunctionalized using a suitable linker. The VS2nanomaterials were synthesized hydrothermally at different reaction temperatures (140 °C, 160 °C, 180 °C and 200 °C) generating different morphologies from a 3D bulk cubic structure at 140 °C to 2D nanosheets at 200 °C. Owing to the advantages of 2D VS2nanosheets with high surface-to-volume ratio, excellent electrochemical response and high antibody loading possibility, it was selected for fabricating an MMP-2 specific biosensor. The antibody-antigen binding event is analyzed by recording electrochemical impedance spectroscopy signals for different target MMP-2 protein concentrations. The sensitivity and lower limit of detection were 7.272 (ΔR/R)(ng ml)-1cm-2and 0.138 fg ml-1, respectively in 10 mM phosphate buffer saline for this proposed sensor. Further, interference studies were also performed which demonstrates the sensor to be highly selective against non-specific target proteins. This 2D VS2nanosheet-based electrochemical biosensor is a sensitive, cost-effective, accurate, and selective solution for cancer diagnosis.

2D Higher-Metal Nitride Nanosheets for Solar Steam Generation.

Higher-metal (HM) nitrides are a fascinating family of materials being increasingly researched due to their unique physical and chemical properties. However, few focus on investigating their application in a solar steam generation because the controllable and large-scale synthesis of these materials remains a significant challenge. Herein, it is reported that higher-metal molybdenum nitride nanosheets (HM-Mo5 N6 ) can be produced at the gram-scale using amine-functionalized MoS2 as precursor. The first-principles calculation confirms amine-functionalized MoS2 nanosheet effectively lengthens the bonds of MoS leading to a lower bond binding energy, promoting the formation of MoN bonds and production of HM-Mo5 N6 . Using this strategy, other HM nitride nanosheets, such as W2 N3 , Ta3 N5 , and Nb4 N5 , can also be synthesized. Specifically, under one simulated sunlight irradiation (1 kW m-2 ), the HM-Mo5 N6 nanosheets are heated to 80 °C within only ≈24 s (0.4 min), which is around 78 s faster than the MoS2 samples (102 s/1.7 min). More importantly, HM-Mo5 N6 nanosheets exhibit excellent solar evaporation rate (2.48 kg m-2  h-1 ) and efficiency (114.6%), which are 1.5 times higher than the solar devices of MoS2 /MF.

Electron-beam induced damage process for Ca2Na2Nb5O16nanosheets.

Dielectric two-dimensional oxide nanosheets are attractive because of their thermal stability and high-k property. However, their atomic structure characterization has been limited since they are easily degraded by electron-beams. This study aimed to investigate the electron-beam induced damage mechanisms for exfoliated Ca2Na2Nb5O16(CNNO) nanosheets. Knock-on damage dominantly occurred at high voltages, leaving short-range order in the final amorphous structure. On the other hand, a series of chemical reactions predominantly occurred at low voltages, resulting in random elemental loss and a fully disordered amorphous structure. This radiolysis was facilitated by insulated CNNO nanosheets that contained a large number of dangling bonds after the chemical solution process. The radiolysis damage kinetics was faster than knock-on damage and induced more elemental loss. Based on our understanding of the electron beam-induced degradation, atomic-scale imaging of the CNNO nanosheets was successfully performed using Cs-corrected scanning transmission electron microscopy at 300 keV with a decreased beam current. This result is of particular significance because understanding of electron-beam damage in exfoliated and insulating 2D oxide sheets could improve identification of their atomic structure using electron microscopy techniques and lead to a practical guide for further extensive characterization of doped elements and layered structures to improve their properties.

Highly Stable Lithium/Sodium Metal Batteries with High Utilization Enabled by a Holey Two-Dimensional N-Doped TiNb2O7 Host.

Lithium/sodium metal batteries have attracted enormous attention as promising candidates for high-energy storage devices. However, their practical applications are impeded by the growth of dendrites upon Li/Na plating. Here, we report that holey 2D N-doped TiNb2O7 (N-TNO) nanosheets with high electroactive surface area and large amounts of lithiophilic/sodiophilic sites can effectively regulate Li/Na deposition as an interfacial layer, leading to an excellent cycling stability. The N-TNO interfacial layer enables the Li||Li symmetric cell to sustain stable electrodeposition over 1000 h as well as the Na||Na cell to stably cycle for 2400 h at 1 mA cm-2 and 3 mA h cm-2 with a depth of discharge as high as 50%. The full cells of the Li/Na anodes based on the N-TNO layer paired with the LiFePO4 and NaTi2(PO4)3 cathodes, respectively, show a very stable cycling over 1000 cycles at a negative-to-positive electrode capacity (N/P) ratio up to 3.

Light-induced dilation in nanosheets of charge-transfer complexes.

We report the observation of a sizable photostrictive effect of 5.7% with fast, submillisecond response times, arising from a light-induced lattice dilation of a molecular nanosheet, composed of the molecular charge-transfer compound dibenzotetrathiafulvalene (DBTTF) and C60 An interfacial self-assembly approach is introduced for the thickness-controlled growth of the thin films. From photoabsorption measurements, molecular simulations, and electronic structure calculations, we suggest that photostriction within these films arises from a transformation in the molecular structure of constituent molecules upon photoinduced charge transfer, as well as the accommodation of free charge carriers within the material. Additionally, we find that the photostrictive properties of the nanosheets are thickness-dependent, a phenomenon that we suggest arises from surface-induced conformational disorder in the molecular components of the film. Moreover, because of the molecular structure in the films, which results largely from interactions between the constituent π-systems and the sulfur atoms of DBTTF, the optoelectronic properties are found to be anisotropic. This work enables the fabrication of 2D molecular charge-transfer nanosheets with tunable thicknesses and properties, suitable for a wide range of applications in flexible electronic technologies.

Two-dimensional inorganic nanosheets: production and utility in the development of novel electrochemical (bio)sensors and gas-sensing applications.

This review (with 178 references) focuses on inorganic layered materials (ILMs) and the use of their two-dimensional nanosheets in the development of novel electrochemical (bio)sensors, analytical devices, and gas-phase sensing applications. The text is organized in three main sections including the presentation of the most important families of ILMs, a comprehensive outline of various "bottom-up", "top-down," and hydro(solvo)thermal methods that have been used for the production of ILM nanosheets, and finally an evaluative survey on their utility for the determination of analytes with interest in different sectors of contemporary analysis. Critical discussion on the effect of the production method on their electronic properties, the suitability of each nanomaterial in different sensing technologies along with an assessment of the performance of the (bio)sensors and devices that have been proposed within the last 5 years, is enclosed. The perspectives of further improving the utility of 2D inorganic nanosheets in sensing applications, in real-world samples, are also discussed.

Chemotaxis-Driven 2D Nanosheet for Directional Drug Delivery toward the Tumor Microenvironment.

Micro/nanoscaled motor particles represent a group of intelligent materials that can precisely and rapidly respond to biological microenvironments and improve therapeutic outcomes. In order to maximize biomedical application potentials, developing a nanoscaled motor particle that is able to move autonomously toward a biological target is highly desired but still remains a critical challenge. Herein, a 2D nanosheet-based catalytic nanomotor with chemotaxis behavior is developed for enhanced drug delivery toward the tumor microenvironment. The nanomotors are constructed via a facile one-pot method and exhibit ultrathin monolayer nanosheet morphology. The 2D structure of nanomotors allows high catalytic activity, leading to responsive, sustained, and relatively long distance movement. Importantly, this nanomotor demonstrates directional motion toward the high gradient of H2 O2 fuel, exhibiting excellent chemotactic properties. After loading an anticancer drug doxorubicin, the nanomotor shows effective inhibition on cancer cell growth in simulated tumor microenvironments. The practical drug delivery application is further strengthened by the intracellular acidity-triggered biodegradability of the nanomotor after accomplishing the directional drug delivery function. This proof-of-concept work highlights the efficient catalytic activity, tumor microenvironment-guided chemotactic movement, excellent cellular performance of the 2D nanomotor, and opens an avenue for biomedical applications such as controlled and smart drug delivery.

2D Boron Imidazolate Framework Nanosheets with Electrocatalytic Applications for Oxygen Evolution and Carbon Dioxide Reduction Reaction.

Ultrathin 2D materials possess unique properties that translate to enhanced efficiency as electrocatalysts, stimulating research toward methodologies that support their preparation. Herein, a two-step strategy is reported that involves the preparation of the new boron imidazolate framework (BIF-73) which is subsequently utilized as a precursor to yield the crystalline 2D nanosheet material (Fe@BIF-73-NS) via post-synthetic modification. This new electrocatalytic material stabilizes ultra-small (Fe2 O3 ) fragments resulting in an excellent electrocatalytic performance for the oxygen evolution reaction (OER: lower overpotential with 291 mV at the current density of 10 mA cm-2 ) and carbon dioxide reduction reaction (faradaic efficiency of CO reaching 88.6% at -1.8 V vs Ag/AgCl) without the need for noble metals. Additionally, theoretical calculations and microscopy reveal that the superior OER performance can be attributed to the increased exposure of binding sites within the material to which the catalytically active Fe3+ centers are bound through a post-synthetic modification procedure. A red-shift of the Fermi level around the valence band is observed and is proposed to be a result of the aforementioned interactions. This work opens an avenue toward the development of 2D functional metal organic framework nanosheets for energy conversion applications.

Free-Standing CoO-POM Janus-like Ultrathin Nanosheets.

A single-step solution-based strategy is used to obtain 2D Janus-like free-standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D-to-1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM-CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM-CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications.

Charged Layered Boron Nitride-Nanoflake Membranes for Efficient Ion Separation and Water Purification.

2D layered nanomaterials have attracted considerable attention for their potential for highly efficient separations, among other applications. Here, a 2D lamellar membrane synthesized using hexagonal boron nitride nanoflakes (h-BNF) for highly efficient ion separation is reported. The ion-rejection performance and the water permeance of the membrane as a function of the ionic radius, ion valance, and solution pH are investigated. The nonfunctionalized h-BNF membranes show excellent ion rejection for small sized salt ions as well as for anionic dyes (>97%) while maintaining a high water permeability, ≈1.0 × 10-3 L m m-2 h-1 bar-1 ). Experiments show that the ion-rejection performance of the membrane can be tuned by changing the solution pH. The results also suggest that the rejection is influenced by the ionic size and the electrostatic repulsion between fixed negative charges on the BN surface and the mobile ions, and is consistent with the Donnan equilibrium model. These simple-to-fabricate h-BNF membranes show a unique combination of excellent ion selectivity and high permeability compared to other 2D membranes.

Rod-Cell-Mimetic Photochromic Layered Ion Channels with Multiple Switchable States for Controllable Ion Transport.

The controllable ion transport in the photoreceptors of rod cells is essentially important for the light detection and information transduction in visual systems. Herein, inspired by the photochromism-regulated ion transport in rod cells with stacking structure, layered ion channels have been developed with a visual photochromic function induced by the alternate irradiation with visible and UV light. The layered structure is formed by stacking spiropyran-modified montmorillonite 2D nanosheets on the surface of an alumina nanoporous membrane. The visual photochromism resulting from the photoisomerization of spiropyran chromophores reversibly regulates the ion transport through layered ion channels. Furthermore, the cooperation of photochromism and pH value achieves multiple switchable states of layered ion channels for the controllable ion transport mimicking the biological process of the visual cycle. The ion transport properties of these states are explained quantitatively by a theoretical calculation based on the Poisson and Nernst-Plank (PNP) equations.