Bending a Cumulene with Electrons: Stepwise Chemical Reduction and Structural Study of a Tetraaryl[4]Cumulene.

Chemical reduction of a [4]cumulene with cesium metal was explored, and the structural changes stemming from electron acquisition are detailed using X-ray crystallography. It is found that the [4]cumulene undergoes dramatic geometric changes upon stepwise reduction, including bending of the cumulenic core and twisting of the endgroups from orthogonal to planar. The structural deformation is consistent with early theoretical reports that suggest that the twisting should occur upon reduction of both even and odd [n]cumulenes. The current results, on the other hand, are inconsistent with a previous experimental study of a [3]cumulene in which the predicted twisting is not observed upon reduction. DFT calculations reveal that the barrier to deformation is an order of magnitude lower in a [3]cumulene than a [4]cumulene, allowing the barrier to be overcome in the solid-state.

Masters of Mediation: MN(SiMe3)2 in Functionalization of C(sp3)-H Latent Nucleophiles.

Organoalkali compounds have undergone a far-reaching transformation being a coupling partner to a mediator in unusual organic conversions which finds its spot in the field of sustainable synthesis. Transition-metal catalysis has always been the priority in C(sp3)-H bond functionalization, however alternatively, in recent times this has been seriously challenged by earth-abundant alkali metals and their complexes arriving at new sustainable organometallic reagents. In this line, the importance of MN(SiMe3)2 (M=Li, Na, K & Cs) reagent revived in C(sp3)-H bond functionalization over recent years in organic synthesis is showcased in this minireview. MN(SiMe3)2 reagent with higher reactivity, enhanced stability, and bespoke cation-π interaction have shown eye-opening mediated processes such as C(sp3)-C(sp3) cross-coupling, radical-radical cross-coupling, aminobenzylation, annulation, aroylation, and other transformations to utilize readily available petrochemical feedstocks. This article also emphasizes the unusual reactivity of MN(SiMe3)2 reagent in unreactive and robust C-X (X=O, N, F, C) bond cleavage reactions that occurred alongside the C(sp3)-H bond functionalization. Overall, this review encourages the community to exploit the untapped potential of MN(SiMe3)2 reagent and also inspires them to take up this subject to even greater heights.

The Sensitivity of Structure to Ionic Radius and Reaction Stoichiometry: A Crystallographic Study of Metal Coordination and Hydrogen Bonding in Barbiturate Complexes of All Five Alkali Metals Li-Cs.

A systematic study has been conducted on barbiturate complexes of all five alkali metals, Li-Cs, prepared from metal carbonates or hydroxides in an aqueous solution without other potential ligands present, varying the stoichiometric ratio of metal ion to barbituric acid (BAH). Eight polymeric coordination compounds (two each for Na, K, and Rb and one each for Li and Cs) have been characterised by single-crystal X-ray diffraction. All contain some combination of barbiturate anion BA- (necessarily in a 1:1 ratio with the metal cation M+), barbituric acid, and water. All organic species and water molecules are coordinated to the metal centres via oxygen atoms as either terminal or bridging ligands. Coordination numbers range from 4 (for the Li complex) to 8 (for the Cs complex). Extensive hydrogen bonding plays a significant role in all the crystal structures, almost all of which include pairs of N-H···O hydrogen bonds linking BA- and/or BAH components into ribbons extending in one dimension. Factors influencing the structure adopted by each compound include cation size and reaction stoichiometry as well as hydrogen bonding.

Tuning NaCo(II) Bimetallic Cooperativity to Perform Co-H Exchange / C-F Bond Activation Processes in Polyfluoroarenes.

Recent advances in cooperative chemistry have shown the potential of heterobimetallic complexes combining an alkali-metal with an earth abundant divalent transition metal for the functionalisation of synthetically relevant aromatic molecules via deprotonative metalation. Pairing sodium with cobalt (II), here we provide an overview of the reactivity of bimetallic [NaCo(HMDS)3] [HMDS = N(SiMe3)2] towards C-H and C-F functionalisation of a wide range of perfluorinated molecules. These studies also uncover the enormous potential of this heterobimetallic base to perform Co-H exchanges with excellent selectivity and exceptional stoichiometric control as well as shedding light on the key role played by the alkali-metal.

New Frontiers in Organosodium Chemistry as Sustainable Alternatives to Organolithium Reagents.

With their highly reactive respective C-Na and N-Na bonds, organosodium and sodium amide reagents could be viewed as obvious replacements or even superior reagents to the popular, widely utilised organolithiums. However, they have seen very limited applications in synthesis due mainly to poor solubility in common solvents and their limited stability. That notwithstanding in recent years there has been a surge of interest in bringing these sustainable metal reagents into the forefront of organometallics in synthesis. Showcasing the growth in utilisation of organosodium complexes within several areas of synthetic chemistry, this Minireview discusses promising new methods that have been recently reported with the goal of taming these powerful reagents. Special emphasis is placed on coordination and aggregation effects in these reagents which can impart profound changes in their solubility and reactivity. Differences in observed reactivity between more nucleophilic aryl and alkyl sodium reagents and the less nucleophilic but highly basic sodium amides are discussed along with current mechanistic understanding of their reactivities. Overall, this review aims to inspire growth in this exciting field of research to allow for the integration of organosodium complexes within common important synthetic transformations.

The Cyanoketenyl Anion [NC3O].

Cumulenes and heterocumulenes with three or more cumulative multiple bonds are usually reactive species that serve as valuable building blocks for more complex molecules but tend to isomerize or cyclize and therefore are difficult to isolate. Using a mild ligand exchange reaction at the carbon in α-metalated ylides, we have now succeeded in the synthesis and gram-scale isolation of the elusive cyanoketenyl anion [NC3O]-. Despite its assumed cumulene-like structure and the delocalization of the negative charge across the whole 5-atom molecule, it features a bent geometry with a nucleophilic central carbon atom. Computational studies reveal an ambiguous bonding situation in the anion, which can be illustrated only by a combination of different resonance structures. Nonetheless, the anion features remarkable stability, thus allowing the storage of its potassium-crown ether salt and its application as a highly functional synthetic building block. The cyanoketenyl anion readily reacts with a series of small molecules to form more complex organic compounds, including industrially valuable compounds such as cyanoacetate. This work demonstrated that reactive species can be generated by novel synthesis methods and open up atom-economic pathways to complex compounds from small abundant molecules.

Gas-Phase Alkali-Metal Cation Affinities of Stabilized Enolates.

The chemistry of alkali-metal enolates is dominated by ion pairing. To improve our understanding of the intrinsic interactions between the alkali-metal cations and the enolate anions, we have applied Cooks' kinetic method to determine relative M+ (M=Li, Na, K) affinities of the stabilized enolates derived from acetylacetone, ethyl acetoacetate, diethyl malonate, ethyl cyanoacetate, 2-cyanoacetamide, and methyl malonate monoamide in the gas phase. Quantum chemical calculations support the experimental results and moreover afford insight into the structures of the alkali-metal enolate complexes. The affinities decrease with increasing size of the alkali-metal cations, reflecting weaker electrostatic interactions and lower charge densities of the free M+ ions. For the different enolates, a comparison of their coordinating abilities is complicated by the fact that some of the free anions undergo conformational changes resulting in stabilizing intramolecular interactions. If these complicating effects are disregarded, the M+ affinities correlate with the electron density of the chelating functionalities, that is, the carbonyl and/or the nitrile groups of the enolates. A comparison with the known association constants of the corresponding alkali-metal enolates in solution points to the importance of solvation effects for these systems.

Three Oxidative Addition Routes of Alkali Metal Aluminyls to Dihydridoaluminates and Reactivity with CO2.

Three distinct routes are reported to the soluble, dihydridoaluminate compounds, AM[Al(NONDipp )(H)2 ] (AM=Li, Na, K, Rb, Cs; [NONDipp ]2- =[O(SiMe2 NDipp)2 ]2- ; Dipp=2,6-iPr2 C6 H3 ) starting from the alkali metal aluminyls, AM[Al(NONDipp )]. Direct H2 hydrogenation of the heavier analogues (AM=Rb, Cs) produced the first examples of structurally characterized rubidium and caesium dihydridoaluminates, although harsh conditions were required for complete conversion. Using 1,4-cyclohexadiene (1,4-CHD) as an alternative hydrogen source in transfer hydrogenation reactions provided a lower energy pathway to the full series of products for AM=Li-Cs. A further moderation in conditions was noted for the thermal decomposition of the (silyl)(hydrido)aluminates, AM[Al(NONDipp )(H)(SiH2 Ph)]. Probing the reaction of Cs[Al(NONDipp )] with 1,4-CHD provided access to a novel inverse sandwich complex, [{Cs(Et2 O)}2 {Al(NONDipp )(H)}2 (C6 H6 )], containing the 1,4-dialuminated [C6 H6 ]2- dianion and representing the first time that an intermediate in the commonly utilized oxidation process of 1,4-CHD to benzene has been trapped. The synthetic utility of the newly installed Al-H bonds has been demonstrated by their ability to reduce CO2 under mild conditions to form the bis-formate AM[Al(NONDipp )(O2 CH)2 ] compounds, which exhibit a diverse series of eyecatching bimetallacyclic structures.

The Transformation of Inorganic to Organic Carbonates: Chasing for Reaction Pathways in Mechanochemistry.

Mechanochemical reactions are solvent-free alternatives to solution-based syntheses enabling even conventionally impossible transformations. Their reaction pathways, however, usually remain unexplored within the heavily vibrating, dense milling vessels. Here, we showcase how the green organic solvent diethyl carbonate is synthesized mechanochemically from inorganic alkali carbonates and how the complementary combination of milling parameter studies, synchrotron X-ray diffraction real time monitoring, and quantum chemical calculations reveal the underlying reaction pathways. With this, reaction intermediates are identified, and chemical concepts of solution-chemistry are challenged or corroborated for mechanochemistry.

Effect of cooking temperature on metal concentrations and speciation in fish muscle and seal liver.

Fish and marine mammals constitute a significant part of the country food diet of many Indigenous communities in Canada. These animals sometimes accumulate essential elements as well as elevated levels of toxic metals. We experimentally assessed how changes in cooking temperature (23-99 °C by boiling) modified elemental concentrations in whitefish muscle and grey seal liver (two organs commonly consumed in some northern communities). Wet and dry elemental concentrations changed linearly as a function of temperature, and two patterns were observed: methylmercury, selenium, and rare earth elements tended to remain associated with the food during cooking, whereas alkali, alkaline-earth metals, and arsenic were significantly transferred to cooking juices. Mass balances indicated that speciation of mercury was stable during cooking. Because elements generally behaved similarly as those of their periodic table group or their ecotoxicological classes (A, B, intermediate), we propose that elemental behavior during cooking is partly a function of chemical affinity, and this relationship can be used to predict the behavior of data-poor elements of emerging concern, such as technology-critical elements. Furthermore, the marked increases and decreases in elemental concentrations during cooking (e.g., -14% As and +39% Se in whitefish; -22% Cd and +55% Hg in seal liver, on a wet weight basis) should be considered when assessing risk because current exposure models usually only consider elemental concentrations in raw food.

Potassium and Cesium Fluorinated ß-Diketonates: Effect of a Cation and Terminal Substituent on Structural and Thermal Properties.

As potential precursors for the synthesis of fluoroperovskites, a family of heavy alkali metal (MI = K, Cs) fluorinated ß-diketonates were prepared and characterized by elemental analysis, IR, and powder-XRD. The crystal structures of the new six complexes, MI(ß-dikF)(H2O)X, X = 0 or 1, were also determined. The structural diversity of this poorly explored class of complexes was discussed, including the preferred types of cation polyhedra and the ligand coordination modes, and the thermal properties of the metal ß-diketonates were studied by TG-DTA in an inert (He) atmosphere. The data obtained allowed us to reveal the effect of the metal cation and the terminal substituent on the structural and thermal features of this family of complexes.

New Frontiers in Alkali-Metal Nickelates.

Recent advances in heterobimetallic chemistry have revealed the potential for mixed-metal systems to facilitate reactions that are unattainable with their single-metal components. This perspective explores the pairing of nickel(0) complexes with organo-alkali-metal reagents, which yield highly reactive alkali-metal nickelates. These previously underexplored systems have re-emerged as a promising area of research, with recent studies uncovering their unique bonding and structural motifs. Furthermore, the discovery of nickelates as potential intermediates in cross-coupling reactions has provided the foundation for the development and mechanistic understanding of stoichiometric and catalytic transformations.

On the Electride Nature of Na-hP4.

Early quantum mechanical models suggested that pressure drives solids towards free-electron metal behavior where the ions are locked into simple close-packed structures. The prediction and subsequent discovery of high-pressure electrides (HPEs), compounds assuming open structures where the valence electrons are localized in interstitial voids, required a paradigm shift. Our quantum chemical calculations on the iconic insulating Na-hP4 HPE show that increasing density causes a 3s→3pd electronic transition due to Pauli repulsion between the 1s2s and 3s states, and orthogonality of the 3pd states to the core. The large lobes of the resulting Na-pd hybrid orbitals point towards the center of an 11-membered penta-capped trigonal prism and overlap constructively, forming multicentered bonds, which are responsible for the emergence of the interstitial charge localization in Na-hP4. These multicentered bonds facilitate the increased density of this phase, which is key for its stabilization under pressure.

A Deeper Understanding of Metal Nucleation and Growth in Rechargeable Metal Batteries Through Theory and Experiment.

Lithium and sodium metal batteries continue to occupy the forefront of battery research. Their exceptionally high energy density and nominal voltages are highly attractive for cutting-edge energy storage applications. Anode-free metal batteries are also coming into the research spotlight offering improved safety and even higher energy densities than conventional metal batteries. However, uneven metal nucleation and growth which leads to dendrites continues to limit the commercialisation of conventional and anode-free metal batteries alike. This review connects models and theories from well-established fields in metallurgy and electrodeposition to both conventional and anode-free metal batteries. These highly applicable models and theories explain the driving forces of uneven metal growth and can inform future experiment design. Finally, the models and theories that are most relevant to each anode-related cell component are identified. Keeping these specific models and theories in mind will assist with rational design for these components.

Selectivity Control of the Ligand Exchange at Carbon in α-Metallated Ylides as a Route to Ketenyl Anions.

α-Metallated ylides have recently been reported to undergo phosphine by CO exchange at the ylidic carbon atom to form isolable ketenyl anions. Systematic studies on the tosyl-substituted yldiides, R3 P=C(M)Ts (M=Li, Na, K), now reveal that carbonylation may lead to a competing metal salt (MTs) elimination. This side-reaction can be controlled by the choice of phosphine, metal cation, solvent and co-ligands, thus enabling the selective isolation of the ketenyl anion [Ts-CCO]M (2-M). Complexation of 2-Na by crown ether or cryptand allowed structure elucidation of the first free ketenyl anion [Ts-CCO]- , which showed an almost linear Ts-C-C linkage indicative for a pronounced ynolate character. However, DFT studies support a high charge at the ketenyl carbon atom, which is reflected in the selective carbon-centered reactivity. Overall, the present study provides important information on the selectivity control of ketenyl anion formation which will be crucial for future applications.

Gas-Phase Alkali Metal-Assisted MOCVD Growth of 2D Transition Metal Dichalcogenides for Large-Scale Precise Nucleation Control.

Advances in large-area and high-quality 2D transition metal dichalcogenides (TMDCs) growth are essential for semiconductor applications. Here, the gas-phase alkali metal-assisted metal-organic chemical vapor deposition (GAA-MOCVD) of 2D TMDCs is reported. It is determined that sodium propionate (SP) is an ideal gas-phase alkali-metal additive for nucleation control in the MOCVD of 2D TMDCs. The grain size of MoS2 in the GAA-MOCVD process is larger than that in the conventional MOCVD process. This method can be applied to the growth of various TMDCs (MoS2 , MoSe2 , WSe2 , and WSe2 ) and the generation of large-scale continuous films. Furthermore, the growth behaviors of MoS2 under different SP and oxygen injection time conditions are systematically investigated to determine the effects of SP and oxygen on nucleation control in the GAA-MOCVD process. It is found that the combination of SP and oxygen increases the grain size and nucleation suppression of MoS2 . Thus, the GAA-MOCVD with a precise and controllable supply of a gas-phase alkali metal and oxygen allows achievement of optimum growth conditions that maximizes the grain size of MoS2 . It is expected that GAA-MOCVD can provide a way for batch fabrication of large-scale atomically thin electronic devices based on 2D semiconductors.

Towards Substrate-Reagent Interaction of Lochmann-Schlosser Bases in THF: Bridging THF Hides Potential Reaction Site of a Chiral Superbase.

The metalation of N,N-dimethylaminomethylferrocene in THF by the superbasic mixture of n BuLi/KOt Bu proceeds readily at low temperatures to afford a bimetallic Li2 K2 aggregate containing ferrocenyl anions and tert-butoxide. Starting from an enantiomerically enriched ortho-lithiated aminomethylferrocene, an enantiomerically pure superbase can be prepared. The molecular compound exhibits superbasic behavior deprotonating N,N-dimethylbenzylamine in the α-position and is also capable of deprotonating toluene. Quantum chemical calculations provide insight into the role of the bridging THF molecule to the possible substrate-reagent interaction. In addition, a benzylpotassium alkoxide adduct gives a closer look into the corresponding reaction site of the Lochmann-Schlosser base that is reported herein.

Heavy Alkali Metal Manganate Complexes: Synthesis, Structures and Solvent-Induced Dissociation Effects.

Rare examples of heavier alkali metal manganates [{(AM)Mn(CH2 SiMe3 )(N'Ar )2 }∞ ] (AM=K, Rb, or Cs) [N'Ar =N(SiMe3 )(Dipp), where Dipp=2,6-iPr2 -C6 H3 ] have been synthesised with the Rb and Cs examples crystallographically characterised. These heaviest manganates crystallise as polymeric zig-zag chains propagated by AM⋅⋅⋅π-arene interactions. Key to their preparation is to avoid Lewis base donor solvents. In contrast, using multidentate nitrogen donors encourages ligand scrambling leading to redistribution of these bimetallic manganate compounds into their corresponding homometallic species as witnessed for the complete Li - Cs series. Adding to the few known crystallographically characterised unsolvated and solvated rubidium and caesium s-block metal amides, six new derivatives ([{AM(N'Ar )}∞ ], [{AM(N'Ar )⋅TMEDA}∞ ], and [{AM(N'Ar )⋅PMDETA}∞ ] where AM=Rb or Cs) have been structurally authenticated. Utilising monodentate diethyl ether as a donor, it was also possible to isolate and crystallographically characterise sodium manganate [(Et2 O)2 Na(n Bu)Mn[(N'Ar )2 ], a monomeric, dinuclear structure prevented from aggregating by two blocking ether ligands bound to sodium.

Assessing Alkali-Metal Effects in the Structures and Reactivity of Mixed-Ligand Alkyl/Alkoxide Alkali-Metal Magnesiates.

Advancing the understanding of using alkali-metal alkoxides as additives to organomagnesium reagents in Mg-Br exchange reactions, a homologous series of mixed-ligand alkyl/alkoxide alkali-metal magnesiates [MMg(CH2 SiMe3 )2 (dmem)]2 [dmem=2-{[2-(dimethylamino)ethyl]methylamino} ethoxide; M=Li, 1; Na, 2; (THF)K, 3] has been prepared. Structural and spectroscopic studies have established the constitutions of these heteroleptic/heterometallic species, which are retained in arene solution. Evaluation of their reactivity towards 2-bromoanisole has uncovered a marked alkali-metal effect with potassium magnesiate 3 being the most efficient of the three ate reagents. Studies probing the constitution of the exchange product from this reaction suggest that the putative [KMgAr2 (dmem)]2 (Ar=o-OMe-C6 H4 ) intermediate undergoes redistribution into its single metal components [KAr]n and [MgAr(dmem)]2 (5). This process can be circumvented by using a different potassium alkoxide containing an aliphatic chain such as KOR' (R'=2-ethylhexyl) which undergoes co-complexation with Mg(CH2 SiMe3 ) to give [KMg(CH2 SiMe3 )2 (OR')]2 (7). This ate, in turn, reacts quantitatively with 2-bromoanisole furnishing [KMgAr2 (OR')]2 (9) which is stable in solution as a bimetallic compound. Collectively this work highlights the complexity of these alkali-metal mediated Mg-Br exchange reactions, where each reaction component can have a profound effect not only on the success of the reaction; but also the stability of the final metalated intermediates prior to their electrophilic interception.

Sigma/pi Bonding Preferences of Solvated Alkali-Metal Cations to Ditopic Arylmethyl Anions.

Arylmethyl anions allow alkali-metals to bind in a σ-fashion to the lateral carbanionic centre or a π-fashion to the aryl ring or in between these extremities, with the trend towards π bonding increasing on descending group 1. Here we review known alkali metal structures of diphenylmethane, fluorene, 2-benzylpyridine and 4-benzylpyridine. Next, we synthesise Li, Na, K monomers of these diarylmethyls using polydentate donors PMDETA or Me6 TREN to remove competing oligomerizing interactions, studying the effect that two aromatic rings has on negative charge (de)localisation via NMR, X-ray crystallographic and DFT studies. Diphenylmethyl and fluorenyl anions maintain C(H)-M interactions regardless of alkali-metal, although the adjacent arene carbons engage in interactions with larger alkali-metals. Introducing a nitrogen atom into the ring (at the 2- or 4-position) encourages relocalisation of negative charge away from the deprotonated carbon and onto nitrogen. Phenyl(2-pyridyl)methyl moves from an enamide formation at one extremity (lithium) to an aza-allyl formation at the other extremity (potassium), while C- or N-coordination modes become energetically viable for Na and K phenyl(4-pyridyl)methyl complexes.