Advanced Cardiac Patches for the Treatment of Myocardial Infarction.

Myocardial infarction is a cardiovascular disease characterized by a high incidence rate and mortality. It leads to various cardiac pathophysiological changes, including ischemia/reperfusion injury, inflammation, fibrosis, and ventricular remodeling, which ultimately result in heart failure and pose a significant threat to global health. Although clinical reperfusion therapies and conventional pharmacological interventions improve emergency survival rates and short-term prognoses, they are still limited in providing long-lasting improvements in cardiac function or reversing pathological progression. Recently, cardiac patches have gained considerable attention as a promising therapy for myocardial infarction. These patches consist of scaffolds or loaded therapeutic agents that provide mechanical reinforcement, synchronous electrical conduction, and localized delivery within the infarct zone to promote cardiac restoration. This review elucidates the pathophysiological progression from myocardial infarction to heart failure, highlighting therapeutic targets and various cardiac patches. The review considers the primary scaffold materials, including synthetic, natural, and conductive materials, and the prevalent fabrication techniques and optimal properties of the patch, as well as advanced delivery strategies. Last, the current limitations and prospects of cardiac patch research are considered, with the goal of shedding light on innovative products poised for clinical application.

Bioengineering Cell Therapy for Treatment of Peripheral Artery Disease.

Peripheral artery disease is an atherosclerotic disease associated with limb ischemia that necessitates limb amputation in severe cases. Cell therapies comprised of adult mononuclear or stromal cells have been clinically tested and show moderate benefits. Bioengineering strategies can be applied to modify cell behavior and function in a controllable fashion. Using mechanically tunable or spatially controllable biomaterials, we highlight examples in which biomaterials can increase the survival and function of the transplanted cells to improve their revascularization efficacy in preclinical models. Biomaterials can be used in conjunction with soluble factors or genetic approaches to further modulate the behavior of transplanted cells and the locally implanted tissue environment in vivo. We critically assess the advances in bioengineering strategies such as 3-dimensional bioprinting and immunomodulatory biomaterials that can be applied to the treatment of peripheral artery disease and then discuss the current challenges and future directions in the implementation of bioengineering strategies.

Bioinspired Approaches to Engineer Antithrombogenic Medical Devices for Vascular Intervention.

Medical devices form a critical component of health care systems for treating and maintaining patient health. However, devices exposed to blood are prone to blood clotting (thrombosis) and bleeding complications leading to device occlusion, device failure, embolism and stroke, and increased morbidity and mortality. Over the years, developments in innovative material design strategies have been made to help reduce the occurrence of thrombotic events on medical devices, but complications persist. Here, we review material and surface coating technologies that have taken bioinspiration from the endothelium to reduce medical device thrombosis, either by mimicking aspects of the glycocalyx to prevent adhesion of proteins and cells to the material surface or mimicking the bioactive function of the endothelium through immobilized or released bioactive molecules to actively inhibit thrombosis. We highlight newer strategies that take inspiration from multiple aspects of the endothelium or are stimuli responsive, only releasing antithrombotic biomolecules when thrombosis is triggered. Emerging areas of innovation target inflammation to decrease thrombosis without increasing bleeding, and interesting results are coming from underexplored aspects of material properties, such as material interfacial mobility and stiffness, which show that increased mobility and decreased stiffness are less thrombogenic. These exciting new strategies require further research and development before clinical translation, including consideration of longevity, cost, and sterilization, but show capacity for the development of more sophisticated antithrombotic medical device materials.

Efficiency of cavitary varnishes containing experimental bioglass particles in the occlusion of dentinal tubules.

This research aims to evaluate the efficiency of cavitary varnishes containing experimental bioglasses in the occlusion of dentinal tubules. One hundred and sixty-eight cervical buccal dentin samples were obtained from bovine teeth. Samples were randomized into the following groups: I. Distilled Water (DW); II. Cavity Varnish (CV); III. Colgate® Sensitive Pro-Relief™ (CS); IV. 45S5 Bioglass (45S5); V. KSr Bioglass strontium potassium (KSr); VI. P Bioglass phosphorus (P); and VII. PSi Bioglass phosphorus silica (PSi). The treatments were applied to the surfaces of the samples, which were then subjected to simulated brushing. The samples were analyzed for a) characterization of bioactive glasses; b) surface roughness; c) descriptive analysis of the dentin surface; d) total versus occluded number of dentinal tubules; e) diameter of the dentinal tubules; f) chemical composition of the dentin surfaces, and g) dentin permeability. All groups treated with biomaterials without the brushing challenge showed an increase in roughness and (total or partial) occlusion of the dentinal tubules. The PSi group had the best values for occlusion, while the KSr group had the highest calcium and phosphorus concentrations. After the brushing challenge the roughness was controlled by the presence of biomaterials; 45S5, KSr, and PSi showed occlusion of the dentin tubules. All bioactive glasses showed reduced tooth permeability compared to distilled water. The PSi group had the smallest tubule diameter and highest phosphorus concentration. KSr and PSi bioglasses are promising materials for dentin occlusion and remineralization and are promising new biomaterials for the treatment of dentin hypersensitivity.

Gelatin methacryloyl hydrogel with and without dental pulp stem cells for TMJ regeneration: An in vivo study in rabbits.

BACKGROUND: In the last decade, tissue-engineering strategies for regenerating the temporomandibular joint (TMJ) have been investigated. This may be a promising strategy for the minimally invasive restoration of joint integrity. OBJECTIVES: To evaluate whether dental pulp stem cells (DPSCs) loaded in a light-occured hydrogel made of gelatin methacryloyl (GelMA) enhance the regeneration of osteochondral defects in the rabbit TMJ. MATERIALS AND METHODS: Defects were filled with GelMA alone (control group; n = 4) or filled with GelMA loaded with rabbit DPSCs (experimental group; n = 4), In one group, the TMJ capsule was opened without creating a defect (sham group; n = 2). The following micro-CT parameters were analysed: bone volume to total volume ratio (BV/TV%) and bone mineral density (BMD). Histological evaluation was performed to assess cartilage regeneration features. A semi-quantitative scoring system was also used to evaluate the defects. RESULTS: All groups had no statistical difference regarding the micro-CT parameters. The highest mean healing score was found for the experimental group. After 4 weeks, there were no signs of hydrogel in either group or no signs of inflammation in the adjacent tissues. The tissue formed in the defect was dense fibrous connective tissue. CONCLUSION: Adding DPSCs to GelMA did not provide a regenerative enhancement in TMJ osteochondral defects. This resulted in similar micro-CT parameters after 4 weeks of healing, with improved signs of subchondral bone regeneration but no cartilage regeneration.

Human Acellular Collagen Matrices-Clinical Opportunities in Tissue Replacement.

The field of regenerative medicine is increasingly in need of effective and biocompatible materials for tissue engineering. Human acellular dermal matrix (hADM)-derived collagen matrices stand out as a particularly promising candidate. Their ability to preserve structural integrity, coupled with exceptional biocompatibility, positions them as a viable choice for tissue replacement. However, their clinical application has been largely confined to serving as scaffolds. This study aims to expand the horizon of clinical uses for collagen sheets by exploring the diverse cutting-edge clinical demands. This review illustrates the clinical utilizations of collagen sheets beyond traditional roles, such as covering skin defects or acting solely as scaffolds. In particular, the potential of Epiflex®, a commercially available and immediately clinically usable allogeneic membrane, will be evaluated. Collagen sheets have demonstrated efficacy in bone reconstruction, where they can substitute the induced Masquelet membrane in a single-stage procedure, proving to be clinically effective and safe. The application of these membranes allow the reconstruction of substantial tissue defects, without requiring extensive plastic reconstructive surgery. Additionally, they are found to be apt for addressing osteochondritis dissecans lesions and for ligament reconstruction in the carpus. The compelling clinical examples showcased in this study affirm that the applications of human ADM extend significantly beyond its initial use for skin defect treatments. hADM has proven to be highly successful and well-tolerated in managing various etiologies of bone and soft tissue defects, enhancing patient care outcomes. In particular, the application from the shelf reduces the need for additional surgery or donor site defects.

Obtaining New Biocompatible Composite Materials with Antibacterial Properties Based on Diatomite and Biologically Active Compounds.

This study aimed to create new composite materials based on diatomite-a non-organic porous compound-through its surface modification with bioactive organic compounds, both synthetic and natural. Chloramphenicol, tetrahydroxymethylglycoluril and betulin were used as modifying substances. Composite materials were obtained by covering the diatomite surface with bioactive substance compounds as a solution and material dispersion in it. The materials were characterized by IR spectroscopy, SEM and X-ray photoelectron spectroscopy. For the biocomposites, the hemolytic effect, plasma proteins' adsorption on the surface and the antibacterial activity of the obtained materials were studied. Results show that the obtained materials are promising for medicine and agriculture.

Scaffold-Mediated Drug Delivery for Enhanced Wound Healing: A Review.

Wound healing is a complex physiological process involving coordinated cellular and molecular events aimed at restoring tissue integrity. Acute wounds typically progress through the sequential phases of hemostasis, inflammation, proliferation, and remodeling, while chronic wounds, such as venous leg ulcers and diabetic foot ulcers, often exhibit prolonged inflammation and impaired healing. Traditional wound dressings, while widely used, have limitations such poor moisture retention and biocompatibility. To address these challenges and improve patient outcomes, scaffold-mediated delivery systems have emerged as innovative approaches. They offer advantages in creating a conducive environment for wound healing by facilitating controlled and localized drug delivery. The manuscript explores scaffold-mediated delivery systems for wound healing applications, detailing the use of natural and synthetic polymers in scaffold fabrication. Additionally, various fabrication techniques are discussed for their potential in creating scaffolds with controlled drug release kinetics. Through a synthesis of experimental findings and current literature, this manuscript elucidates the promising potential of scaffold-mediated drug delivery in improving therapeutic outcomes and advancing wound care practices.

Genes That Escape X Chromosome Inactivation Modulate Sex Differences in Valve Myofibroblasts.

BACKGROUND: Aortic valve stenosis is a sexually dimorphic disease, with women often presenting with sustained fibrosis and men with more extensive calcification. However, the intracellular molecular mechanisms that drive these clinically important sex differences remain underexplored. METHODS: Hydrogel biomaterials were designed to recapitulate key aspects of the valve tissue microenvironment and to serve as a culture platform for sex-specific valvular interstitial cells (VICs; precursors to profibrotic myofibroblasts). The hydrogel culture system was used to interrogate intracellular pathways involved in sex-dependent VIC-to-myofibroblast activation and deactivation. RNA sequencing was used to define pathways involved in driving sex-dependent activation. Interventions with small molecule inhibitors and siRNA transfections were performed to provide mechanistic insight into sex-specific cellular responses to microenvironmental cues, including matrix stiffness and exogenously delivered biochemical factors. RESULTS: In both healthy porcine and human aortic valves, female leaflets had higher baseline activation of the myofibroblast marker α-smooth muscle actin compared with male leaflets. When isolated and cultured, female porcine and human VICs had higher levels of basal α-smooth muscle actin stress fibers that further increased in response to the hydrogel matrix stiffness, both of which were higher than in male VICs. A transcriptomic analysis of male and female porcine VICs revealed Rho-associated protein kinase signaling as a potential driver of this sex-dependent myofibroblast activation. Furthermore, we found that genes that escape X-chromosome inactivation such as BMX and STS (encoding for Bmx nonreceptor tyrosine kinase and steroid sulfatase, respectively) partially regulate the elevated female myofibroblast activation through Rho-associated protein kinase signaling. This finding was confirmed by treating male and female VICs with endothelin-1 and plasminogen activator inhibitor-1, factors that are secreted by endothelial cells and known to drive myofibroblast activation through Rho-associated protein kinase signaling. CONCLUSIONS: Together, in vivo and in vitro results confirm sex dependencies in myofibroblast activation pathways and implicate genes that escape X-chromosome inactivation in regulating sex differences in myofibroblast activation and subsequent aortic valve stenosis progression. Our results underscore the importance of considering sex as a biological variable to understand the molecular mechanisms of aortic valve stenosis and to help guide sex-based precision therapies.

Biocompatible Material-Based Flexible Biosensors: From Materials Design to Wearable/Implantable Devices and Integrated Sensing Systems.

Human beings have a greater need to pursue life and manage personal or family health in the context of the rapid growth of artificial intelligence, big data, the Internet of Things, and 5G/6G technologies. The application of micro biosensing devices is crucial in connecting technology and personalized medicine. Here, the progress and current status from biocompatible inorganic materials to organic materials and composites are reviewed and the material-to-device processing is described. Next, the operating principles of pressure, chemical, optical, and temperature sensors are dissected and the application of these flexible biosensors in wearable/implantable devices is discussed. Different biosensing systems acting in vivo and in vitro, including signal communication and energy supply are then illustrated. The potential of in-sensor computing for applications in sensing systems is also discussed. Finally, some essential needs for commercial translation are highlighted and future opportunities for flexible biosensors are considered.

Laser-induced graphene on cross-linked sodium alginate.

Laser-induced graphene (LIG) possesses desirable properties for numerous applications. However, LIG formation on biocompatible substrates is needed to further augment the integration of LIG-based technologies into nanobiotechnology. Here, LIG formation on cross-linked sodium alginate is reported. The LIG is systematically investigated, providing a comprehensive understanding of the physicochemical characteristics of the material. Raman spectroscopy, scanning electron microscopy with energy-dispersive x-ray analysis, x-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy techniques confirm the successful generation of oxidized graphene on the surface of cross-linked sodium alginate. The influence of laser parameters and the amount of crosslinker incorporated into the alginate substrate is explored, revealing that lower laser speed, higher resolution, and increased CaCl2content leads to LIG with lower electrical resistance. These findings could have significant implications for the fabrication of LIG on alginate with tailored conductive properties, but they could also play a guiding role for LIG formation on other biocompatible substrates.

Foreign body reactions related to orofacial esthetic fillers: A systematic review.

The aim of this study was to systematically review the clinicopathological data regarding foreign body reactions (FBR) related to esthetic procedures in the orofacial region. Electronic searches were performed in six databases and in gray literature using PEO acronym for the review question. Case series and case reports describing FBR related to esthetic procedures in the orofacial region were included. The JBI Critical Appraisal Checklist-University of Adelaide tool was used for measuring the risk of bias. Eighty-six studies reporting 139 cases of FBR were identified. The mean age at diagnosis was 54.12 years (14-85 years), with most of the cases reported in America, North America (n = 42/30.70%) and Latin America (n = 33/23.60%), mainly occurring in women (n = 131/94.40%). Asymptomatic (n = 60/43.40%) nodules (n = 71/50.60%) were the main clinical characteristics. The lower lip represented the most affected anatomical location (n = 28/22.20%), followed by the upper lip (n = 27/21.60%). Surgical removal was the treatment of choice (n = 53/35.70%). Twelve different dermal fillers were reported in the study, and the microscopic characteristics of the cases varied according to the material used. The results based on case series and case reports showed that nodule and swelling were the main clinical characteristics of FBR related to orofacial esthetic fillers. The histological characteristics depended on the type of the filler material used.

Marginal gaps and voids using two warm compaction techniques and different sealers: a micro-CT study.

OBJECTIVE: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet. MATERIALS AND METHODS: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite. Then, the specimens were paired into four groups (n=10) according to the root canal filling technique and endodontic sealer: Bio-C sealer and continuous wave of condensation, Bio-C sealer and Tagger's hybrid, AH Plus Jet and continuous wave of condensation, and AH Plus Jet and Tagger's hybrid. After root canal filling, a new scan was performed. The percentage of marginal gaps and voids was calculated with the ImageJ software, and the data were analyzed statistically using two-way ANOVA and Tukey tests, with a significance level of 5%. RESULTS: The percentage of marginal gaps was significantly lower in the Bio-C sealer than in AH Plus Jet (p=0.021) regardless of the technique. However, no difference was found in the percentage of voids between root canal filling techniques and the endodontic sealer (p>0.05). CONCLUSION: Both sealers and techniques demonstrated good quality of root canal filling. However, the use of the Bio-C sealer enhanced the filling ability by reducing marginal gaps, regardless of the root canal filling technique. CLINICAL RELEVANCE: This study highlights the better performance of the Bio-C sealer in the quality of the root canal filling, reducing marginal gaps when compared to AH Plus Jet independent of the technique.

Tissue Bioengineering with Fibrin Scaffolds and Deproteinized Bone Matrix Associated or Not with the Transoperative Laser Photobiomodulation Protocol.

Extending the range of use of the heterologous fibrin biopolymer, this pre-clinical study showed a new proportionality of its components directed to the formation of scaffold with a lower density of the resulting mesh to facilitate the infiltration of bone cells, and combined with therapy by laser photobiomodulation, in order to accelerate the repair process and decrease the morphofunctional recovery time. Thus, a transoperative protocol of laser photobiomodulation (L) was evaluated in critical bone defects filled with deproteinized bovine bone particles (P) associated with heterologous fibrin biopolymer (HF). The groups were: BCL (blood clot + laser); HF; HFL; PHF (P+HF); PHFL (P+HF+L). Microtomographically, bone volume (BV) at 14 days, was higher in the PHF and PHFL groups (10.45 ± 3.31 mm3 and 9.94 ± 1.51 mm3), significantly increasing in the BCL, HFL and PHFL groups. Histologically, in all experimental groups, the defects were not reestablished either in the external cortical bone or in the epidural, occurring only in partial bone repair. At 42 days, the bone area (BA) increased in all groups, being significantly higher in the laser-treated groups. The quantification of bone collagen fibers showed that the percentage of collagen fibers in the bone tissue was similar between the groups for each experimental period, but significantly higher at 42 days (35.71 ± 6.89%) compared to 14 days (18.94 ± 6.86%). It can be concluded that the results of the present study denote potential effects of laser radiation capable of inducing functional bone regeneration, through the synergistic combination of biomaterials and the new ratio of heterologous fibrin biopolymer components (1:1:1) was able to make the resulting fibrin mesh less dense and susceptible to cellular permeability. Thus, the best fibrinogen concentration should be evaluated to find the ideal heterologous fibrin scaffold.

Bioactive glass for periodontal regeneration: a systematic review.

BACKGROUND: One of the major clinical challenges of this age could be represented by the possibility to obtain a complete regeneration of infrabony defects. Over the past few years, numerous materials and different approaches have been developed to obtain bone and periodontal healing. Among all biomaterials, bioglasses (BG) are one of the most interesting due to their ability to form a highly reactive carbonate hydroxyapatite layer. Our aim was to systematically review the literature on the use and capability of BG for the treatment of periodontal defects and to perform a meta-analysis of their efficacy. METHODS: A search of MEDLINE/PubMed, Cochrane Library, Embase and DOSS was conducted in March 2021 to identify randomized controlled trials (RCTs) using BG in the treatment of intrabony and furcation defects. Two reviewers selected the articles included in the study considering the inclusion criteria. The outcomes of interest were periodontal and bone regeneration in terms of decrease of probing depth (PD) and gain of clinical attachment level (CAL). A network meta-analysis (NMA) was fitted, according to the graph theory methodology, using a random effect model. RESULTS: Through the digital search, 46 citations were identified. After duplicate removal and screening process, 20 articles were included. All RCTs were retrieved and rated following the Risk of bias 2 scale, revealing several potential sources of bias. The meta-analysis focused on the evaluation at 6 months, with 12 eligible articles for PD and 10 for CAL. As regards the PD at 6 months, AUTOGENOUS CORTICAL BONE, BIOGLASS and PLATELET RICH FIBRIN were more efficacious than open flap debridement alone, with a statistically significant standardized mean difference (SMD) equal to -1.57, -1.06 and - 2.89, respectively. As to CAL at 6 months, the effect of BIOGLASS is reduced and no longer significant (SMD = -0.19, p-value = 0.4) and curiously PLATELET RICH FIBRIN was more efficacious than OFD (SMD =-4.13, p-value < 0.001) in CAL gain, but in indirect evidence. CONCLUSIONS: The present review partially supports the clinical efficacy of BG in periodontal regeneration treatments for periodontal purposes. Indeed, the SMD of 0.5 to 1 in PD and CAL obtained with BG compared to OFD alone seem clinically insignificant even if it is statistically significant. Heterogeneity sources related to periodontal surgery are multiple, difficult to assess and likely hamper a quantitative assessment of BG efficacy.

The promise of stem cells in amyotrophic lateral sclerosis: a review of clinical trials.

Amyotrophic Lateral Sclerosis (ALS) is a neurodegenerative condition with high cost of care, poor treatment outcomes, and a significant decrease in quality of life, eventually culminating in high mortality rates. Stem cells present an attractive alternative to conventional therapies as they can regenerate tissue and introduce growth factors to slow down the progression of disease. We conducted a comprehensive review of literature available in the MEDLINE (PUBMED), Scopus, and Cochrane Library databases, of current usage of stem cells and stem cell-based biomaterials for ALS treatment. Clinical trials, less than 10 years old, on human subjects were included in the study. Overall, stem cells, whether mesenchymal, non-lineage, or neural stem cells all seem safe for use in therapy for ALS. However, due to the chronic nature of the disease the efficacy of the treatment is not proven and warrants further investigation.

Accelerated Oral Healing by Angelica gigas Nakai from Hot Melt Extrusion Technology: An In Vitro Study.

Background and Objectives: In spite of the oral environment being healing-prone, its dynamic changes may affect wound healing. The purpose of this study was to assess the oral wound healing effect of Angelica gigas Nakai (AG) prepared by hot-melt extrusion. Materials and Methods: Human gingival fibroblast (HGF) cells were treated with AG or AG via hot-melt extrusion (AGH) for 24 h to determine the optimal concentration. For evaluating the anti-inflammatory effect of AG and AGH, a nitric oxide assay was performed under lipopolysaccharide (LPS) stimulation. The wound-healing effects of AG and AGH were evaluated using cell proliferation/migration assays and wound-healing marker expression through qRT-PCR. Results: Both AG and AGH showed no cytotoxicity on HGH cells. Regarding nitric oxide production, AGH significantly decreased LPS-induced nitric oxide production (p < 0.05). AGH showed a significantly positive result in the cell proliferation/cell migration assay compared with that in AG and the control. Regarding wound healing marker expression, AGH showed significantly greater VEGF and COL1α1 expression levels than those in the others (p < 0.05), whereas α-SMA expression was significantly different among the groups. Conclusions: Within the limits of this study, AGH accelerated oral wound healing in vitro.

Scaffolds for Dentin-Pulp Complex Regeneration.

Background and Objectives: Regenerative dentistry aims to regenerate the pulp-dentin complex and restore those of its functions that have become compromised by pulp injury and/or inflammation. Scaffold-based techniques are a regeneration strategy that replicate a biological environment by utilizing a suitable scaffold, which is considered crucial for the successful regeneration of dental pulp. The aim of the present review is to address the main characteristics of the different scaffolds, as well as their application in dentin-pulp complex regeneration. Materials and Methods: A narrative review was conducted by two independent reviewers to answer the research question: What type of scaffolds can be used in dentin-pulp complex regeneration? An electronic search of PubMed, EMBASE and Cochrane library databases was undertaken. Keywords including "pulp-dentin regeneration scaffold" and "pulp-dentin complex regeneration" were used. To locate additional reports, reference mining of the identified papers was undertaken. Results: A wide variety of biomaterials is already available for tissue engineering and can be broadly categorized into two groups: (i) natural, and (ii) synthetic, scaffolds. Natural scaffolds often contain bioactive molecules, growth factors, and signaling cues that can positively influence cell behavior. These signaling molecules can promote specific cellular responses, such as cell proliferation and differentiation, crucial for effective tissue regeneration. Synthetic scaffolds offer flexibility in design and can be tailored to meet specific requirements, such as size, shape, and mechanical properties. Moreover, they can be functionalized with bioactive molecules, growth factors, or signaling cues to enhance their biological properties and the manufacturing process can be standardized, ensuring consistent quality for widespread clinical use. Conclusions: There is still a lack of evidence to determine the optimal scaffold composition that meets the specific requirements and complexities needed for effectively promoting dental pulp tissue engineering and achieving successful clinical outcomes.

An innovative electrically conductive biopolymer based on poly(ß-cyclodextrin) towards recognition of ascorbic acid in real sample: Utilization of biocompatible advanced materials in biomedical analysis.

In this study, a sensitive platform was designed for the electrocatalytical oxidation and recognition of ascorbic acid (AA) based on poly(ß-cyclodextrin) modified glassy carbon electrode (p(ß-CD-GCE). Electropolymerization of ß-CD on the surface of GCE was performed on the potential range of -1 to 1.5 V. So, a novel biopolymer was prepared on the surface of GCE towards sensitive recognition of AA in human plasma samples. The developed platform has good sensitivity and accuracy for electrooxidation and detection of AA with lower limit of quantification (LLOQ) of 1 nM and linear range of 1 nM to 100 mM. Moreover, the designed electrochemical sensor was employed for the analysis of AA on human plasma samples with high sensitivity. Based on advantages of p(ß-CD) prepared by electropolymerization procedure (green, fast, homogeny, and efficient eletrocatalytical behaviour), this conductive biopolymer showed excellent analytical behaviour towards electrooxidation of AA. It is expected that the prepared polymeric interface is able to use in the analysis of biological species in clinical samples.

Polycaprolactone/Beta-Tricalcium Phosphate Scaffolds Obtained via Rotary Jet-Spinning: in vitro and in vivo Evaluation.

This study aimed to evaluate in vitro and in vivo polymeric membranes obtained by a rotary jet-spinning process for the repair of critical bone defects in the calvaria of Wistar rats, for future use in tissue engineering. Experimental sample collections were performed on the 30, 60 and 90th postoperative days, and the analyses performed were histomorphometric, immunohistochemistry, and western blotting. Reducing inflammatory infiltrate in all groups and experimental periods, angiogenesis on the 30th day did not show any difference between the groups, on the 60th day, 5% polycaprolactone/beta-tricalcium phosphate(PCL/ß-TCP) was high compared to control (C), and on the 90th day, the same group reduced when compared to C and 10% PCL/ß-TCP. The fibroplasia presented oscillations in every segment; on the 30th and 60th day, there was an increase in 5% PCL/ß-TCP, which decreased by the 90th day compared to group C. 10% PCL/ß-TCP decreased compared to C on the 60th and 90th day. The percentage of the collagen area remained high in all groups and all experimental periods. Immunohistochemistry quantifications showed variations in bone metabolism suggesting new bone formation. The 5 and 10% PCL/ß-TCP scaffold were promising for the bone regeneration process because they participated in the modulation of inflammation, angiogenesis, fibroplasia, and collagenosis.