Use of 3D printing to integrate microchip electrophoresis with amperometric detection.

This paper describes the use of PolyJet 3D printing to fabricate microchip electrophoresis devices with integrated microwire electrodes for amperometric detection. The fabrication process involves 3D printing of two separate pieces, a channel layer and an electrode layer. The channel layer is created by 3D printing on a pre-fabricated mold with a T-intersection. For the electrode layer, a stencil design is printed directly on the printing tray and covered with a piece of transparent glass. Microwire electrodes are adhered over the glass piece (guided by underlaying stencil) and a CAD design of the electrode layer is then printed on top of the microwire electrode. After delamination from the glass after printing, the microwire is embedded in the printed piece, with the stencil design ensuring that alignment and positioning of the electrode is reproducible for each print. After a thermal bonding step between the channel layer and electrode layer, a complete electrophoresis device with integrated microelectrodes for amperometric detection results. It is shown that this approach enables different microwire electrodes (gold or platinum) and sizes (100 or 50 µm) to be integrated in an end-channel configuration with no gap between the electrode and the separation channel. These devices were used to separate a mixture of catecholamines and the effect of separation voltage on the potential voltage applied on the working electrode was also investigated. In addition, the effect of electrode size on the number of theoretical plates and limit of detection was studied. Finally, a device that contains different channel heights and a detection electrode was 3D-printed to integrate continuous flow sampling with microchip electrophoresis and amperometric detection.

Analysis of selenium nanoparticles in human plasma by capillary electrophoresis hyphenated to inductively coupled plasma mass spectrometry.

Nanoparticles (NPs) are increasingly applied in research and development of new therapies. Characterization of NP systems most often include size, shape, size distribution, and charge but information on the chemical stability of NPs and investigation of the presence of dissolved species is most often missing in efficacy studies due to lack of appropriate methods. In this study, a method based on capillary electrophoresis coupled to inductively coupled plasma mass spectrometry (CE-ICP-MS) was established for analysis of selenium (Se) NPs and dissolved Se species in aqueous media. Peak area and migration time precisions (RSD) of 1.4-3.0% and 1.0-2.6%, respectively, were obtained. CE-ICP-MS analysis of a commercially available SeNP suspension (Q-SeNP) revealed large amounts of selenite corresponding to 32% of the total Se content in the suspension, indicating considerable NP degradation upon storage. The CE-ICP-MS method was modified using a coated fused silica capillary in order to analyze SeNPs in human plasma. Peak area and migration time precisions (RSD) in the range of 3.3-10.7% and 0.8-2.8%, respectively, were achieved. Degradation of polyvinyl alcohol (PVA)-coated SeNPs to selenite in human plasma was demonstrated using the modified method. The amounts of SeNP and selenite were estimated based on a correction factor for the ICP-MS signals of PVA-SeNP and dissolved Se. To the best of our knowledge, this is the first study of SeNPs by CE-ICP-MS and highlights the potential of CE-ICP-MS for quantitative characterization of the behavior of SeNPs in biological media.

Enrichment-free analysis of anionic micropollutants in the sub-ppb range in drinking water by capillary electrophoresis-high resolution mass spectrometry.

Reversed-phase liquid chromatography (RPLC) used for water analysis is not ideal for the analysis of highly polar and ionic contaminants because of low retention. Capillary electrophoresis (CE), on the other hand, is perfectly suited for the separation of ionic compounds but rarely applied in environmental analysis due to the weak concentration sensitivity when coupled to mass spectrometry (MS). However, novel interface designs and MS technology strongly improve the sensitivity. Here, a method is presented enabling the screening of anionic micropollutants in drinking water without sample pretreatment by coupling of CE to an Orbitrap mass spectrometer by a nanoflow sheath liquid interface. Targeted analysis of halogenated acetic acids, trifluoromethanesulfonic acid, and perfluorooctanoic and perfluorooctanesulfonic acid was conducted in drinking water samples which were chlorinated for disinfection. A bare fused silica capillary with an optimized background electrolyte (BGE) for separation consisting of 10% acetic acid with 10% isopropanol with large volume sample injection and optimized interface parameters offer limits of quantification in the range of < 0.1 to 0.5 µg/L with good linearity (R2 > 0.993) and repeatability (14% standard deviation in area). Concentrations of the target analytes ranged from 0.1 to 6.2 µg/L in the water samples. Masses corresponding to halogenated methanesulfonic acids have been found as suspects and were subsequently verified by standards. Mono-, dichloro-, and bromochloro methanesulfonic acid were quantified in a range of 0.2 to 3.6 µg/L. Furthermore, five sulfonic acids, four organosulfates, and the artificial sweeteners acesulfame and cyclamate as well as inorganics such as halides, halogenates, phosphate, and sulfate could be determined as suspects among more than 300 features in a non-targeted screening. Overall, this approach demonstrates the great potential of CE-nanoESI-MS for the screening of ionic contaminants in environmental samples, complementary to chromatographic approaches.

Measurement of natural variation of neurotransmitter tissue content in red harvester ant brains among different colonies.

Colonies of the red harvester ant, Pogonomyrmex barbatus, regulate foraging activity based on food availability and local conditions. Colony variation in foraging behavior is thought to be linked to biogenic amine signaling and metabolism. Measurements of differences in neurotransmitters have not been made among ant colonies in a natural environment. Here, for the first time, we quantified tissue content of 4 biogenic amines (dopamine, serotonin, octopamine, and tyramine) in single forager brains from 9 red harvester ant colonies collected in the field. Capillary electrophoresis coupled with fast-scan cyclic voltammetry (CE-FSCV) was used to separate and detect the amines in individual ant brains. Low levels of biogenic amines were detected using field-amplified sample stacking by preparing a single brain tissue sample in acetonitrile and perchloric acid. The method provides low detection limits: 1 nM for dopamine, 2 nM for serotonin, 5 nM for octopamine, and 4 nM for tyramine. Overall, the content of dopamine (47 ± 9 pg/brain) was highest, followed by octopamine (36 ± 10 pg/brain), serotonin (20 ± 4 pg/brain), and tyramine (14 ± 3 pg/brain). Relative standard deviations were high, but there was less variation within a colony than among colonies, so the neurotransmitter content of each colony might change with environmental conditions. This study demonstrates that CE-FSCV is a useful method for investigating natural variation in neurotransmitter content in single ant brains and could be useful for future studies correlating tissue content with colony behavior such as foraging. Graphical abstract.

Droplet sample introduction to microchip gel and zone electrophoresis for rapid analysis of protein-protein complexes and enzymatic reactions.

Electrophoresis has demonstrated utility as tool for screening of small molecule modulators of protein-protein interactions and enzyme targets. Screening of large chemical libraries requires high-throughput separations. Such fast separation can be accessed by microchip electrophoresis. Here, microchip gel electrophoresis separations of proteins are achieved in 2.6 s with 1200 V/cm and 3-mm separation lengths. However, such fast separations can still suffer from limited overall throughput from sample introduction constraints. Automated introduction of microfluidic droplets has been demonstrated to overcome this limitation. Most devices for coupling microfluidic droplets to microchip electrophoresis are only compatible with free-solution separations. Here, we present a device that is compatible with coupling droplets to gel and free-solution electrophoresis. In this device, automated sample introduction is based on a novel mechanism of carrier phase separation using the difference in density of the carrier phase and the running buffer. This device is demonstrated for microchip gel electrophoresis and free-solution electrophoresis separations of protein-protein interaction and enzyme samples, respectively. Throughputs of about 10 s per sample are achieved and over 1000 separations are demonstrated without reconditioning of the device. Graphical abstract.

Thread-based assay for quantitative small molecule analysis of mice tear fluid by capillary electrophoresis.

Tear fluid plays blood-like roles in the cornea, and changes in its chemical composition may be reflective of ocular surface disease pathogenesis. Studies of mice tears are limited by the small volume available for collection and difficulty in obtaining representative samples. Here, we establish a non-invasive assay for small volume analysis of small molecules in mice tears that requires no pre-treatment of mice. To the best of our knowledge, this is the first small molecule analysis of mice tears. Nanoliters of mice tears (70 ± 25 nL) was collected via a single insertion of phenol red thread in the corner of the eye without anesthesia to prevent any tear production alteration. The processing and elution of tear samples were optimized for minimal sample handling and dilution while maintaining high separation resolution. A capillary electrophoresis separation with light-emitting diode-induced fluorescence detection was developed for the analysis of primary amine-containing small molecules. The levels of arginine, alanine, aspartate, and glutamate after elution were in the micromolar range as seen in human tears. However, taurine and histamine levels were decreased and increased, respectively, compared to human tears, which may be indicative of restraint-induced emotional stress. No significant differences were seen for any of the small molecules between 20-week-old ND4 Swiss Webster females and 12-week-old CD-1 males (N = 3). The developed assay represents a means to assess the chemical composition of tear fluid in mouse models of human disease, which could significantly improve our understanding of ocular surface diseases. Graphical abstract ᅟ.

Development of an automated capillary nano-immunoassay-Simple Western assay-to quantify total TDP43 protein in human platelet samples.

Frontotemporal lobar degeneration syndrome is the second cause of young-onset dementia. Unfortunately, reliable biomarkers are currently lacking for the diagnosis of this disease. As TDP43 protein is one of the proteins pathologically involved in frontotemporal lobar degeneration, many studies have been performed to assess TDP43 protein diagnostic performances. Mixed results were obtained using cerebrospinal fluid and plasma samples so far. The aim of the study was to develop an automated capillary nano-immunoassay-Simple Western assay-to detect and quantify TDP43 protein simultaneously in human blood-based samples. Simple Western assay was developed with two different cell lysates used as positive controls and was compared to Western blot. TDP43 protein profiles in plasma samples were disappointing, as they were discordant to our positive controls. On the contrary, similar TDP43 patterns were obtained between platelet samples and cell lysates using both assays. Simple Western assay provided good quantitative performances in platelet samples: a linearity of signals could be observed (r2 = 0.994), associated to a within-run variability at 5.7%. Preliminary results based on a cohort of patients suffering from frontotemporal lobar degeneration showed large inter-individual variations superior to Simple Western's analytical variability. Simple Western assay seems to be suitable for detecting and quantifying TDP43 protein in platelet samples, providing a potential candidate biomarker in this disease. Further confirmation studies should now be performed on larger cohorts of patients to assess diagnostic performances of TDP43 protein in platelet samples.

Characterization of a nanoflow sheath liquid interface and comparison to a sheath liquid and a sheathless porous-tip interface for CE-ESI-MS in positive and negative ionization.

Coupling of capillary electrophoresis to electrospray mass spectrometry still remains challenging and a topic of research to find the best interface regarding sensitivity, robustness, and ease of use. Here, a nanoflow sheath liquid interface for CE-ESI-MS is presented and compared to both a standard triple-tube sheath liquid and a porous-tip sheathless interface for three groups of analytes. The nanoflow sheath liquid interface with a separation capillary inserted into a glass emitter was initially characterized to facilitate optimization and method development. Implementation of a shut-off valve, syringe pump, and inline filter enabled easy handling and fast analyses, repeatable both in positive and negative modes (intra-day RSD of 6.6 to 12.0%). The same setup was used for sheathless interfacing by exchanging the emitter and using a porous etched tip separation capillary. Both nanoflow interfaces showed similar performance. Average peak areas using the nanoflow sheath liquid interface were a factor of 38 for 6 organic acids in negative mode, 114 and 36 for the light and heavy chain of a monoclonal antibody, and 13 higher for peptides in positive mode compared to the triple-tube interface. This first direct comparison of the three most common interfaces exhibits a strong improvement in sensitivity to the same extent for both nanoflow interfaces, where sheath liquid interfaces offer full flexibility in method development.

Automated microfluidic devices integrating solid-phase extraction, fluorescent labeling, and microchip electrophoresis for preterm birth biomarker analysis.

We have developed multichannel integrated microfluidic devices for automated preconcentration, labeling, purification, and separation of preterm birth (PTB) biomarkers. We fabricated multilayer poly(dimethylsiloxane)-cyclic olefin copolymer (PDMS-COC) devices that perform solid-phase extraction (SPE) and microchip electrophoresis (µCE) for automated PTB biomarker analysis. The PDMS control layer had a peristaltic pump and pneumatic valves for flow control, while the PDMS fluidic layer had five input reservoirs connected to microchannels and a µCE system. The COC layers had a reversed-phase octyl methacrylate porous polymer monolith for SPE and fluorescent labeling of PTB biomarkers. We determined µCE conditions for two PTB biomarkers, ferritin (Fer) and corticotropin-releasing factor (CRF). We used these integrated microfluidic devices to preconcentrate and purify off-chip-labeled Fer and CRF in an automated fashion. Finally, we performed a fully automated on-chip analysis of unlabeled PTB biomarkers, involving SPE, labeling, and µCE separation with 1 h total analysis time. These integrated systems have strong potential to be combined with upstream immunoaffinity extraction, offering a compact sample-to-answer biomarker analysis platform. Graphical abstract Pressure-actuated integrated microfluidic devices have been developed for automated solid-phase extraction, fluorescent labeling, and microchip electrophoresis of preterm birth biomarkers.

Interspecies comparison of peptide substrate reporter metabolism using compartment-based modeling.

Peptide substrate reporters are fluorescently labeled peptides that can be acted upon by one or more enzymes of interest. Peptide substrates are readily synthesized and more easily separated than full-length protein substrates; however, they are often more rapidly degraded by peptidases. As a result, peptide reporters must be made resistant to proteolysis in order to study enzymes in intact cells and lysates. This is typically achieved by optimizing the reporter sequence in a single cell type or model organism, but studies of reporter stability in a variety of organisms are needed to establish the robustness and broader utility of these molecular tools. We measured peptidase activity toward a peptide substrate reporter for protein kinase B (Akt) in E. coli, D. discoideum, and S. cerevisiae using capillary electrophoresis with laser-induced fluorescence (CE-LIF). Using compartment-based modeling, we determined individual rate constants for all potential peptidase reactions and explored how these rate constants differed between species. We found the reporter to be stable in D. discoideum (t 1/2 = 82-103 min) and S. cerevisiae (t 1/2 = 279-314 min), but less stable in E. coli (t 1/2 = 21-44 min). These data suggest that the reporter is sufficiently stable to be used for kinase assays in eukaryotic cell types while also demonstrating the potential utility of compartment-based models in peptide substrate reporter design. Graphical abstract Cell lysates from several evolutionarily divergent species were incubated with a peptide substrate reporter, and compartment-based modeling was used to determine key steps in the metabolism of the reporter in each cell type.

Pressure-actuated microfluidic devices for electrophoretic separation of pre-term birth biomarkers.

We have developed microfluidic devices with pressure-driven injection for electrophoretic analysis of amino acids, peptides, and proteins. The novelty of our approach lies in the use of an externally actuated on-chip peristaltic pump and closely spaced pneumatic valves that allow well-defined, small-volume sample plugs to be injected and separated by microchip electrophoresis. We fabricated three-layer poly(dimethylsiloxane) (PDMS) microfluidic devices. The fluidic layer had injection and separation channels, and the control layer had an externally actuated on-chip peristaltic pump and four pneumatic valves around the T-intersection to carry out sample injection. An unpatterned PDMS membrane layer was sandwiched between the fluidic and control layers as the actuated component in pumps and valves. Devices with the same peristaltic pump design but different valve spacings (100, 200, 300, and 400 µm) from the injection intersection were fabricated using soft lithographic techniques. Devices were characterized through fluorescent imaging of captured plugs of a fluorescein-labeled amino acid mixture and through microchip electrophoresis separations. A suitable combination of peak height, separation efficiency, and analysis time was obtained with a peristaltic pump actuation rate of 50 ms, an injection time of 30 s, and a 200-µm valve spacing. We demonstrated the injection of samples in different solutions and were able to achieve a 2.4-fold improvement in peak height and a 2.8-fold increase in separation efficiency though sample stacking. A comparison of pressure-driven injection and electrokinetic injection with the same injection time and separation voltage showed a 3.9-fold increase in peak height in pressure-based injection with comparable separation efficiency. Finally, the microchip systems were used to separate biomarkers implicated in pre-term birth. Although these devices have initially been demonstrated as a stand-alone microfluidic separation tool, they have strong potential to be integrated within more complex systems.

Direct detection of endogenous MicroRNAs and their post-transcriptional modifications in cancer serum by capillary electrophoresis-mass spectrometry.

MicroRNA molecules (miRNAs) are a class of small, single-stranded, non-coding RNA molecules that regulate cellular messenger RNA and their corresponding proteins. Extracellular miRNAs circulate in the bloodstream inside exosomes or in complexes with proteins and lipoproteins. The miRNA sequences and their quantitative levels are used as unique signatures associated with cancer diagnosis and prognosis after anticancer treatment. MicroRNAs are modified through a series of processing events after transcription like 5'-end phosphorylation, 3'- end adenylation or uridylation, terminal nucleotide deletion. The problem is that existing bioanalytical methods such as microarrays and a quantitative polymerase chain reaction are sensitive, but not capable of identifying the post-transcriptional modifications of miRNA. Here we report a capillary electrophoresis-mass spectrometry (CE-MS) method, which performs a multiplex, direct analysis of miRNAs from biological samples. Using the CE-MS method, we detected two endogenous human circulating miRNAs, a 23-nucleotide long 5'-phosporylated miRNA with 3'-uridylation (iso-miR-16-5p), and a 22-nucleotide long 5'-phosporylated miRNA (miR-21-5p) isolated from B-cell chronic lymphocytic leukemia serum. The CE separation and following MS analysis provides label-free quantitation and reveals modifications of miRNAs. MicroRNA profiling of serum samples with CE-MS has the potential to be a versatile and minimally invasive bioassay that could lead to better clinical diagnostics and disease treatment.

Affinity capillary electrophoresis: the theory of electromigration.

We focus on the state-of-the-art theory of electromigration under single and multiple complexation equilibrium. Only 1:1 complexation stoichiometry is discussed because of its unique status in the field of affinity capillary electrophoresis (ACE). First, we summarize the formulas for the effective mobility in various ACE systems as they appeared since the pioneering days in 1992 up to the most recent theories till 2015. Disturbing phenomena that do not alter the mobility of the analyte directly but cause an unexpected peak broadening have been studied only recently and are also discussed in this paper. Second, we turn our attention to the viscosity effects in ACE. Change in the background electrolyte viscosity is unavoidable in ACE but numerous observations scattered throughout the literature have not been reviewed previously. This leads to an uncritical employment of correction factors that may or may not be appropriate in practice. Finally, we consider the ionic strength effects in ACE, too. Limitations of the current theories are also discussed and the tasks identified where open problems still prevail. Graphical Abstract A weak base (A) undergoes an acidic-basic equilibria (in blue) and migrates with an electrophoretic mobility of [Formula: see text]. Simultaneously, it interacts with a selector (sel) while the analyte-selector complex migrates with an electrophoretic mobility of [Formula: see text]. The strength of the interaction (in orange) is governed by the binding constant, K A , and the concentration of the selector, c sel . This all gives the analyte an effective mobility of [Formula: see text] and moves it out of the zero position (EOF; right top insert). The interaction of the positively charged analyte with the neutral selector slows down the analyte with increasing selector concentration (right bottom insert).