Fenpropathrin provoked kidney damage via controlling the NLRP3/Caspase-1/GSDMD-mediated pyroptosis: The palliative role of curcumin-loaded chitosan nanoparticles.

This study assessed the ability of formulated curcumin-loaded chitosan nanoparticles (CU-CS-NPs) to reduce the kidney damage resulting from fenpropathrin (FPN) in rats compared to curcumin (CU) in rats. Sixty male Sprague Dawley rats were separated into six groups and orally administered 1 mL/kg b.wt corn oil, 50 mg CU/kg b.wt, 50 mg CU-CS-NPs /kg b.wt., 15 mg FPN /kg b.wt, CU+ FPN or CU-CS-NPs + FPN for 60 days. Then, serum renal damage products were assessed. Total antioxidant capacity, reactive oxygen species, interleukin 1ß (IL-1ß), malondialdehyde, NF-κB P65, cleaved-Caspase-1, and Caspase-8 were estimated in kidney homogenates. The cleaved Caspase-3 and TNF-α immunoexpression and pyroptosis-related genes were determined in renal tissues. The results showed that CU-CS-NPS significantly repressed the FPN-induced increment in kidney damage products (urea, uric acid, and creatinine). Moreover, the FPN-associated hypo-proteinemia, renal oxidative stress and apoptotic reactions, and impaired renal histology were considerably repaired by CU and CU-CS-NPs. Additionally, compared to FPN-exposed rats, CU, and CU-CS-NPs-treated rats had considerably lower immunoexpression of cleaved Caspase-3 and TNF-α in renal tissue. The pyroptosis-related genes NLRP3, GSDMD, IL-18, Caspase-3, Caspase-1, IL-1ß, Caspase-8, TNF-α, and NF-κB dramatically upregulated by FPN exposure in the renal tissues. Yet, in CU and CU-CS-NPs-treated rats, the gene above expression deviations were corrected. Notably, CU-CS-NPs were superior to CU in preventing oxidative damage and inflammation and regulating pyroptosis in the renal tissues of the FPN-exposed group. The results of the present study conclusively showed the superior favorable effect of CU-CS-NPs in counteracting renal impairment linked to environmental pollutants.

Spraying with encapsulated nitric oxide donor reduces weight loss and oxidative damage in papaya fruit.

The combination of nitric oxide (NO) donors with nanomaterials has emerged as a promising approach to reduce postharvest losses. The encapsulation of NO donors provides protection from rapid degradation and controlled release, enhancing the NO effectiveness in postharvest treatments. Moreover, the application method can also influence postharvest responses. In this study, two application methods were evaluated, spraying and immersion, using S-nitrosoglutathione (GSNO, a NO donor) in free and encapsulated forms on papaya fruit. Our hypothesis was that GSNO encapsulated in chitosan nanoparticles would outperform the free form in delaying fruit senescence. In addition, this study marks the pioneering characterization of chitosan nanoparticles containing GSNO within the framework of a postharvest investigation. Overall, our findings indicate that applying encapsulated GSNO (GSNO-NP-S) through spraying preserves the quality of papaya fruit during storage. This method not only minimizes weight loss, ethylene production, and softening, but also stimulates antioxidant responses, thereby mitigating oxidative damage. Consequently, it stands out as the promising technique for delaying papaya fruit senescence. This innovative approach holds the potential to enhance postharvest practices and advance sustainable agriculture.

Dietary Mentha piperita essential oil loaded in chitosan nanoparticles mediated the growth performance and humoral immune responses in Siberian sturgeon (Acipenserbaerii).

Siberian sturgeon (Acipenser baerii) fry often face environmental stressors that can compromise their immune system, rendering them susceptible to opportunistic pathogens in intensive aquaculture systems. In this study, we explored the innovative use of chitosan nanoparticles loaded with Mentha piperita essential oil (MPO/CNPs) as a dietary supplement to improve the growth and immune responses of A. baerii. The results demonstrated that the addition of MPO/CNPs to the diet led to significant improvements in growth, as evidenced by increased red blood cell count, hematocrit, haemoglobin concentration, and reduced triglyceride levels. Furthermore, significant differences were observed in the immune parameters for the treatment groups receiving Mentha piperita essential oil loaded in chitosan nanoparticles (MPO/CNPs), including enhanced lysozyme activity, immunoglobulin M (IgM) levels, respiratory burst activity, and ACH50 activity. Additionally, gene expression analysis revealed upregulation of key immune-related genes in the MPO/CNPs-treated groups. These findings suggest that the use of MPO/CNPs can enhance the growth and bolster the immune defences of Siberian sturgeon fry, contributing to more sustainable production in intensive aquaculture environments.

Starch/chitosan nanoparticles bionanocomposite membranes for methylene blue dye removal.

This research aims to develop relatively new membranes from starch biopolymer incorporated with different concentrations (0, 5, 10, 15, 20% w/w of solid starch) of chitosan nanoparticles (CNP) that can be used for water treatment. The membranes were fabricated using the solvent casting method while the CNP was produced using the ionic gelation method. The membranes were characterized in terms of morphology, porosity, water vapor permeability (WVP), and water contact angle. The application of the membranes to treat water was demonstrated on methylene blue solution because methylene blue is a commonly used dye in many industries. It was found that the starch/10% CNP membrane was the optimum membrane for methylene blue dye treatment because the membrane exhibits a smooth surface, high WVP (1.67 × 10-10g Pa-1h-1m-1), high porosity (59.92%), low water contact angle value (44.8°), and resulted in the highest percentage removal of methylene blue (94.0%) after the filtration. After filtration, the starch/10% CNP membrane was still in good condition without breakage. In conclusion, the starch/CNP membranes produced in this study are promising for sustainable and environmentally friendly water treatment, especially for water containing methylene blue dye. This research aligns with current thematic trends in bionanohybrid composite materials utilization, offering innovative solutions for addressing water pollution challenges.

Hesperetin-loaded chitosan nanoparticles ameliorate hyperglycemia by regulating key enzymes of carbohydrate metabolism in a diabetic rat model.

The study aimed to investigate the potential of hesperetin-loaded chitosan nanoparticles (HSPCNPs) in alleviating hyperglycemia by modulating key enzymes in diabetic rats. Chitosan nanoparticles loaded with hesperetin were prepared using the ionic gelation method and characterized with Electron microscope (SEM), zeta potential, particle size analysis, Fourier-transform infrared (FT-IR), Energy dispersive spectroscopy (EDS) and Encapsulation efficiency and Loading efficiency. To induce diabetes, rats were fed a high-fat beef tallow diet for 28 days, then given a single dose of streptozotocin (STZ) at 35 mg/kg b.w in 0.1 M citrate buffer (pH 4.0). Rats were treated with HSPCNPs at doses of 10, 20, and 40 mg/kg b.w. The analyzed parameters included body weight, food and water intake, plasma glucose and insulin, liver and skeletal muscle glycogen levels, and carbohydrate metabolism. SEM imaging revealed dimensions between 124.2 and 251.6 nm and a mean particle size of 145.0 nm. FT-IR analysis confirmed the presence of functional groups in the chitosan nanoparticles, and the zeta potential was 35.5 mV. HSPCNP 40 mg/kg b.w significantly (p < 0.05) reduced blood glucose levels and glycosylated hemoglobin, improving body weight, food intake, and reducing water intake. In diabetic rats, enzymes for carbohydrate metabolism like fructose 1,6-bisphosphatase, phosphoenolpyruvate carboxykinase, and glucose 6-phosphatase are evaluated in the liver, while glucose 6 phosphate dehydrogenase and hexokinase activity were significantly lower. Additionally, plasma insulin levels increased, indicating enhanced insulin sensitivity. The results show that HSPCNPs at 40 mg/kg b.w. ameliorate hyperglycemia to provide robust protection against diabetic complications and significantly improve metabolic health.

Comparative biotoxicity study for identifying better alternative insecticide especially green nano-emulsion which used as mosquitocides.

This research work was planned to test biosafety of different nanomaterials on the different animals models. These nanoparticles were previously used as potential insecticides of mosquito larvae. The biosafety of these nanoproducts were evaluated on certain organs of non target animals that associated with mosquito breeding sites in Egypt. Animal organs such as the kidneys of rats, toads, and the fish's spleen were used as models to study the biological toxicity of these nanomaterials. After 30 days of the animals receiving the nanomaterials in their water supply, different cell mediated immune cells were assessed in these tissues. Both TNF-α and BAX immuno-expression were also used as immunohistochemical markers. Histopathology was conducted to detect the effect of the tested nanoproducts at the tissue level of the liver and kidneys of both the rats and toads. Green nanoemulsion of the lavender essential oil was relatively more effective, safe, and biodegradable to be used as insecticides against mosquito larvae than the metal-based nanomaterials.

Antimicrobial efficacy of chitosan versus sodium hypochlorite: A systematic review and meta-analysis.

AIM: This meta-analysis aimed to compare the antibacterial efficacy of chitosan/chitosan nanoparticles (Ch/Ch-NPs) versus sodium hypochlorite/chlorhexidine (NaOCl/CHX). MATERIALS AND METHODS: A search was performed in four electronic databases until December 08, 2023. Studies with missing, unclear, and insufficient data sets were excluded. The included studies were assessed by two independent reviewers using the Joanna Briggs Institute Critical Appraisal Checklist for Quasi-Experimental Studies. The meta-analysis of standardized mean difference was performed using a random effects model. Additionally, funnel plots as well as Egger's regression intercept test were used to evaluate potential publication bias. RESULTS: A total of 426 samples were used in nine included studies. There was no difference in antibacterial efficacy between Ch/Ch-NPs-NaOCl (SMD: 0.005; 95% CI: -0.844-0.854; p = 0.990). However, the antibacterial efficacy of NaOCl was statistically more effective than Ch/Ch-NPs (SMD: 0.807; 95% CI: 0.015-1.599; p = 0.046) using the bacterial culture method, and Ch/Ch-NPs was statistically higher than NaOCl (SMD: -1.827; 95% CI: -2.720, -0.934; p < 0.000) using confocal laser scanning microscopy. CONCLUSIONS: Ch/Ch-NPs may be an alternative to NaOCl against Enterococcus faecalis. The methods used in the in vitro studies evaluating the antibacterial efficacy of irrigation solutions against E. faecalis may have had an impact on the results.

Green Synthesized Chitosan Nanoparticles for Controlling Multidrug-Resistant mecA- and blaZ-Positive Staphylococcus aureus and aadA1-Positive Escherichia coli.

Antimicrobial resistance has recently been considered an emerging catastrophe globally. The public health and environmental threats were aggravated by the injudicious use of antibiotics in animal farming, aquaculture, and croup fields, etc. Consequently, failure of antibiotic therapies is common because of the emergence of multidrug-resistant (MDR) bacteria in the environment. Thus, the reduction in antibiotic spillage in the environment could be an important step for overcoming this situation. Bear in mind, this research was focused on the green synthesis of chitosan nanoparticles (ChiNPs) using Citrus lemon (Assam lemon) extract as a cross-linker and application in controlling MDR bacteria to reduce the antibiotic spillage in that sector. For evaluating antibacterial activity, Staphylococcus aureus and Escherichia coli were isolated from environmental specimens, and their multidrug-resistant pattern were identified both phenotypically by disk diffusion and genotypically by detecting methicillin- (mecA), penicillin- (blaZ), and streptomycin (aadA1)-resistance encoding genes. The inhibitory zone's diameter was employed as a parameter for determining the antibacterial effect against MDR bacteria revealing 30 ± 0.4 mm, 34 ± 0.2 mm, and 36 ± 0.8 mm zones of inhibition against methicillin- (mecA) and penicillin (blaZ)-resistant S. aureus, and streptomycin (aadA1)-resistant E. coli, respectively. The minimum inhibitory concentration at 0.31 mg/mL and minimum bactericidal concentration at 0.62 mg/mL of yielded ChiNPs were used as the broad-spectrum application against MDR bacteria. Finally, the biocompatibility of ChiNPs was confirmed by showing a negligible decrease in BHK-21 cell viability at doses less than 2 MIC, suggesting their potential for future application in antibiotic-free farming practices.

Hijacking 5-Fluorouracil Chemoresistance in Triple Negative Breast Cancer via microRNAs-Loaded Chitosan Nanoparticles.

Chemotherapy is still the mainstay of treatment for triple-negative breast cancer (TNBC) patients. Yet only 20% of TNBC patients show a pathologic complete response (pCR) after neoadjuvant chemotherapy. 5-Fluorouracil (5-FU) is a stable cornerstone in all recommended chemotherapeutic protocols for TNBC patients. However, TNBC patients' innate or acquired chemoresistance rate for 5-FU is steeply escalating. This study aims to unravel the mechanism behind the chemoresistance of 5-FU in the aggressive TNBC cell line, MDA-MB-231 cells, to explore further the role of the tumor suppressor microRNAs (miRNAs), miR-1275, miR-615-5p, and Let-7i, in relieving the 5-FU chemoresistance in TNBC, and to finally provide a translational therapeutic approach to co-deliver 5-FU and the respective miRNA oligonucleotides using chitosan-based nanoparticles (CsNPs). In this regard, cellular viability and proliferation were investigated using MTT and BrdU assays, respectively. 5-FU was found to induce JAK/STAT and PI3K/Akt/mTOR pathways in MDA-MB-231 cells with contaminant repression of their upstream regulators miR-1275, miR-615-5p, and Let-7i. Moreover, CsNPs prepared using the ionic gelation method were chosen and studied as nanovectors of 5-FU and a combination of miRNA oligonucleotides targeting TNBC. The average particle sizes, surface charges, and morphologies of the different CsNPs were characterized using dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. In addition, the encapsulation efficiency (EE%), drug loading capacity (DLC%), and release manner at two different pH values were assessed. In conclusion, the novel CsNPs co-loaded with 5-FU and the combination of the three miRNA oligonucleotides demonstrated synergistic activity and remarkable repression in cellular viability and proliferation of TNBC cells through alleviating the chemoresistance to 5-FU.

SLN and chitosan nano-delivery systems for antibacterial effect of black seed (Nigella sativa) oil against S. aureus.

Staphylococcus aureus with current universal importance represents a main carrier of emerging antimicrobial resistance determinatives of global health concerns that have developed drug resistance mechanisms to the various available antibiotics. On the other hand, due to the antimicrobial potential of Nigella Sativa oil (NSO), it was hypothesized that incorporation of nano-carriers (NS-SLN and NS-chitosan (CH) nanoparticles) can enhance its antibacterial effects. This study evaluated the physico-chemical and antibacterial characteristics of NS-SLN and NS-CH. TEM images revealed a round shape with clear edges for both nanoparticles, and the average sizes were reported to be 196.4 and 446.6 nm for NS-SLN and NS-CH, respectively. The zeta potential and encapsulation efficiency were -28.9 and 59.4 mV and 73.22% and 88% for NS-SLN and NS-CH, respectively. The Minimum Inhibitory Concentrations for NSO, NS-SLN, and NS-CH against S. aureus were 480, 200, and 80 µg/mL, respectively. The results confirm significantly stronger antibacterial influences of NSO when loaded into chitosan nanoparticles as a potential candidate for nano-delivery of antimicrobial agents.

Essential-Oils-Loaded Biopolymeric Nanoparticles as Strategies for Microbial and Biofilm Control: A Current Status.

The emergence of bacterial strains displaying resistance to the currently available antibiotics is a critical global concern. These resilient bacteria can form biofilms that play a pivotal role in the failure of bacterial infection treatments as antibiotics struggle to penetrate all biofilm regions. Consequently, eradicating bacteria residing within biofilms becomes considerably more challenging than their planktonic counterparts, leading to persistent and chronic infections. Among various approaches explored, essential oils loaded in nanoparticles based on biopolymers have emerged, promising strategies that enhance bioavailability and biological activities, minimize side effects, and control release through regulated pharmacokinetics. Different available reviews analyze nanosystems and essential oils; however, usually, their main goal is the analysis of their antimicrobial properties, and progress in biofilm combat is rarely discussed, or it is not the primary objective. This review aims to provide a global vision of biofilm conformation and describes mechanisms of action attributed to each EO. Furthermore, we present a comprehensive overview of the latest developments in biopolymeric nanoparticles research, especially in chitosan- and zein-based nanosystems, targeting multidrug-resistant bacteria in both their sessile and biofilm forms, which will help to design precise strategies for combating biofilms.

Fabrication of jamun seed starch/tamarind kernel xyloglucan bio-nanocomposite films incorporated with chitosan nanoparticles and their application on sapota (Manilkara zapota) fruits.

The present work develops bio-nanocomposite packaging films by valorizing agricultural byproducts jamun seed starch (JaSS) and tamarind kernel xyloglucan (XG), and adding varying concentrations of chitosan nanoparticles (ChNPs). The blending of JaSS and XG promotes a dense polymer network in the composite films with enhanced packaging attributes. However, ChNPs incorporation significantly reduced the viscosity and dynamic moduli of the JaSS/XG film-forming solutions. The FTIR and XRD results reveal improved intermolecular interactions and crystallinity. The DSC and TGA thermograms showed improved thermal stability in the ChNP-loaded JaSS/XG films. The addition of 3 % w/w ChNPs significantly enhanced the tensile strength (20.42 MPa), elastic modulus (0.8 GPa), and contact angle (89°), along with reduced water vapor transmission rate (13.26 g/h.m2) of the JaSS/XG films. The films exhibited strong antimicrobial activity against Bacillus cereus and Escherichia coli. More interestingly, the JaSS/XG/ChNPs coating on the sapota fruits retarded the weight loss and color change up to 12 days of storage. Overall, the JaSS/XG/ChNP bio-nanocomposites are promising packaging materials.

Gold nanorod-chitosan based nanocomposites for photothermal and chemoembolization therapy of breast cancer.

Gold nanorods (AuNR) have received significant attention in tumor thermo-chemotherapy. However, insufficient thermal availability limits the in vivo highly efficient applications of AuNR in photothermal therapy. In this study, we have fabricated N-isopropylacrylamide grafted O-carboxymethyl chitosan nanoparticles (NCMC NPs) with thermo-responsive properties for co-encapsulating AuNR and doxorubicin (DOX), forming AuNR@NCMC/DOX nanocomposites (NCs). As a result of the thermo- and photothermal-responsiveness, AuNR@NCMC/DOX NCs exhibited irreversible aggregation at high temperature and under near-infrared (NIR) irradiation with an increase of size to 3 µm. When AuNR@NCMC/DOX NCs reached tumor sites following intravenous administration, they were located in the tumor vessels under NIR irradiation due to an embolization effect. This response enhanced tumor targeting, on-demand release, and the thermal performance of AuNR@NCMC/DOX NCs. We have observed higher tumor accumulation of DOX and AuNR with subsequent stronger inhibition of tumor growth than that achieved without NIR irradiation. The development of AuNR-based NCs with multiple smart responsivenesses at tumors can provide a promising paradigm for solid tumor treatment via the cooperative effects of photothermal therapy and chemoembolization.

Efficacy of Gentamicin-Loaded Chitosan Nanoparticles Against Staphylococcus aureus Internalized in Osteoblasts.

Staphylococcus aureus, the principal causative agent of osteomyelitis, can be internalized by osteoblasts and thereby escape from immune phagocytes and many kinds of antibiotics. To deliver antibiotics into osteoblasts to kill S. aureus in the intracellular environment, we developed gentamicin-loaded chitosan nanoparticles and evaluated their intracellular bactericidal effect. We found decreased numbers of S. aureus cells in infected osteoblasts treated with gentamicin-loaded chitosan nanoparticles. The cytotoxicity of the nanoparticles was evaluated by CCK-8 assay. There was no significant viability decrease at all tested concentrations. In conclusion, our results provide evidence for the potential use of gentamicin-loaded chitosan nanoparticles to enhance the delivery of gentamicin into cells and for their antibacterial effect against internalized S. aureus in the intracellular environment of osteoblasts.

Preparation and characterization of nisin-loaded chitosan nanoparticles functionalized with DNase I for the removal of Listeria monocytogenes biofilms.

Listeria monocytogenes biofilms represent a continuous source of contamination, leading to serious food safety concerns and economic losses. This study aims to develop novel nisin-loaded chitosan nanoparticles (CSNPs) functionalized with DNase I and evaluate its antibiofilm activity against L. monocytogenes on food contact surfaces. Nisin-loaded CSNPs (CS-N) were first prepared by ionic cross-linking, and DNase I was covalently grafted on the surface (DNase-CS-N). The NPs were subsequently characterized by Zetasizer Nano, transmission electron microscopy, Fourier transform infrared (FT-IR), and X-ray diffraction (XRD). The antibiofilm activity of NPs was evaluated against L. monocytogenes on polyurethane (PU). The DNase-CS-N was fabricated and characterized with quality attributes (particle size-427.0 ± 15.1 nm, polydispersity [PDI]-0.114 ± 0.034, zeta potential-+52.5 ± 0.2 mV, encapsulation efficiency-46.5% ± 3.6%, DNase conjugate rate-70.4% ± 0.2). FT-IR and XRD verified the loading of nisin and binding of DNase I with chitosan. The DNase-CS-N caused a 3 log colony-forming unit (CFU)/cm2 reduction of L. monocytogenes biofilm cells, significantly higher than those in CSNPs (1.4 log), CS-N (1.8 log), and CS-N in combination with DNase I (2.2 log) treatment groups. In conclusion, nisin-loaded CSNPs functionalized with DNase I were successfully prepared and characterized with smooth surface and nearly spherical shape, high surface positive charge, and good stability, which is effective to eradicate L. monocytogenes biofilm cells on food contact surfaces, exhibiting great potential as antibiofilm agents in food industry. PRACTICAL APPLICATION: Listeria monocytogenes biofilms are a common safety hazard in food processing. In this study, novel nanoparticles were successfully constructed and are expected to be a promising antibiofilm agent in the food industry.

Isolation and encapsulation of bacteriophage with chitosan nanoparticles for biocontrol of multidrug-resistant methicillin-resistant Staphylococcus aureus isolated from broiler poultry farms.

This study was divided into two parts. The first part, the determination of methicillin-resistant Staphylococcus aureus (MRSA) prevalence in 25 broiler chicken farms, with the detection of multidrug resistant MRSA strains. The prevalence of MRSA was 31.8% (159 out of 500 samples) at the level of birds and it was 27% (27 out of 100) in the environmental samples. The highest antimicrobial resistance of the recovered MRSA strains was recorded to streptomycin (96%). All isolates (100%) had multidrug resistance (MDR) to four or more antibiotics with 16 distinct antibiotic resistant patterns, and multiple antibiotic resistance index (MARI) of 0.4-1. The second part, implementing novel biocontrol method for the isolated multidrug resistant MRSA strains through the isolation of its specific phage and detection of its survival rate at different pH and temperature degrees and lytic activity with and without encapsulation by chitosan nanoparticles (CS-NPs). Encapsulated and non-encapsulated MRSA phages were characterized using transmission electron microscope (TEM). Encapsulation of MRSA phage with CS-NPs increasing its lytic activity and its resistance to adverse conditions from pH and temperature. The findings of this study suggested that CS-NPs act as a protective barrier for MRSA phage for the control of multidrug resistant MRSA in broiler chicken farms.

A review of chitosan nanoparticles: Nature's gift for transforming agriculture through smart and effective delivery mechanisms.

Chitosan nanoparticles (CNPs) have emerged as a promising tool in agricultural advancements due to their unique properties including, biocompatability, biodegradability, non-toxicity and remarkable versatility. These inherent properties along with their antimicrobial, antioxidant and eliciting activities enable CNPs to play an important role in increasing agricultural productivity, enhancing nutrient absorption and improving pest management strategies. Furthermore, the nano-formulation of chitosan have the ability to encapsulate various agricultural amendments, enabling the controlled release of pesticides, fertilizers, plant growth promoters and biocontrol agents, thus offering precise and targeted delivery mechanisms for enhanced efficiency. This review provides a comprehensive analysis of the latest research and developments in the use of CNPs for enhancing agricultural practices through smart and effective delivery mechanisms. It discusses the synthesis methods, physicochemical properties, and their role in enhancing seed germination and plant growth, crop protection against biotic and abiotic stresses, improving soil quality and reducing the environmental pollution and delivery of agricultural amendments. Furthermore, the potential environmental benefits and future directions for integrating CNPs into sustainable agricultural systems are explored. This review aims to shed light on the transformative potential of chitosan nanoparticles as nature's gift for revolutionizing agriculture and fostering eco-friendly farming practices.

Evaluation of fracture resistance of maxillary premolars of different geometrical cavities restored with different composite resins incorporated with chitosan nanoparticles.

Background: Composites with 0.2% chitosan nanoparticles (CSN) are used recently; however, this combination needs to be studied in different cavity designs. Aims: The aim of the study was to compare the fracture resistance of maxillary premolars with different cavity geometries restored with different types of composite resins incorporated with 0.2% CSN. Methods: About 130 extracted human single-rooted maxillary premolars were embedded in acrylic molds 2 mm below cementoenamel junction, divided into five groups for cavity preparations of standardized dimensions. Group 1: (control) intact teeth (n = 10), Group 2: Class I cavities (n = 40), Group 3: Class II mesio-occlusal (MO) (n = 40), Group 4: Class II mesio-occluso-distal (MOD) (n = 40). Groups 2, 3, and 4 were subdivided into four subgroups for composite restoration; A: Neo spectra ST-Universal (NST); B: Tetric N-Ceram Bulk-fill (TNC); C: NST + CSN; and D: TNC + CSN and tested for fracture resistance using universal testing machine. Statistical Analysis: One-way analysis of variance and post hoc Tukey's tests were used for data analysis (P ≤ 0.05). Results: In all groups, the highest fracture resistance was found in MOD cavities, followed by MO and least in Class I cavities. Subgroup D (TNC with CSN) showed the highest fracture resistance in all groups (P ≤ 0.05). Conclusion: Tetric N-Ceramic bulk fill with 0.25% CSN showed high fracture resistance in cavities with different geometries.

A sustainable green-approach for biofabrication of chitosan nanoparticles, optimization, characterization, its antifungal activity against phytopathogenic Fusarium culmorum and antitumor activity.

Chitosan is a natural non-toxic, biocompatible, biodegradable, and mucoadhesive polymer. It also has a broad spectrum of applications such as agriculture, medical fields, cosmetics and food industries. In this investigation, chitosan nanoparticles were produced by an aqueous extract of Cympopogon citratus leaves as a reducing agent. According to the SEM and TEM micrographs, CNPs had a spherical shape, and size ranging from 8.08 to 12.01 nm. CNPs have a positively charged surface with a Zeta potential of + 26 mV. The crystalline feature of CNPs is determined by X-ray diffraction. There are many functional groups, including C꞊C, CH2-OH, C-O, C-S, N-H, CN, CH and OH were detected by FTIR analysis. As shown by the thermogravimetric study, CNPs have a high thermal stability. For the optimization of the green synthesis of CNPs, a Face centered central composite design (FCCCD) with 30 trials was used. The maximum yield of CNPs (13.99 mg CNPs/mL) was produced with chitosan concentration 1.5%, pH 4.5 at 40 °C, and incubation period of 30 min. The antifungal activity of CNPs was evaluated against phytopathogenic fungus; Fusarium culmorum. A 100% rate of mycelial growth inhibition was gained by the application of 20 mg CNPs/mL. The antitumor activity of the green synthesized CNPs was examined using 6 different cell lines, the viability of the cells reduced when the concentration of green synthesized CNPs increased, the IC50 dose of the green synthesized CNPs on the examined cell lines HePG-2, MCF-7, HCT-116, PC-3, Hela and WI-38 was 36.25 ± 2.3, 31.21 ± 2.2, 67.45 ± 3.5, 56.30 ± 3.3, 44.62 ± 2.6 and 74.90 ± 3.8; respectively.

Chitosan- and hyaluronic acid-based nanoarchitectures in phototherapy: Combination cancer chemotherapy, immunotherapy and gene therapy.

Cancer phototherapy has been introduced as a new potential modality for tumor suppression. However, the efficacy of phototherapy has been limited due to a lack of targeted delivery of photosensitizers. Therefore, the application of biocompatible and multifunctional nanoparticles in phototherapy is appreciated. Chitosan (CS) as a cationic polymer and hyaluronic acid (HA) as a CD44-targeting agent are two widely utilized polymers in nanoparticle synthesis and functionalization. The current review focuses on the application of HA and CS nanostructures in cancer phototherapy. These nanocarriers can be used in phototherapy to induce hyperthermia and singlet oxygen generation for tumor ablation. CS and HA can be used for the synthesis of nanostructures, or they can functionalize other kinds of nanostructures used for phototherapy, such as gold nanorods. The HA and CS nanostructures can combine chemotherapy or immunotherapy with phototherapy to augment tumor suppression. Moreover, the CS nanostructures can be functionalized with HA for specific cancer phototherapy. The CS and HA nanostructures promote the cellular uptake of genes and photosensitizers to facilitate gene therapy and phototherapy. Such nanostructures specifically stimulate phototherapy at the tumor site, with particle toxic impacts on normal cells. Moreover, CS and HA nanostructures demonstrate high biocompatibility for further clinical applications.