RESUMEN
We investigated the magnetorheological (MR) properties of the carbon nanotube (CNT)-Co0.4Fe0.4Ni0.2 composite suspension to find a high-performance MR fluid with excellent stability. The composites were fabricated by chemical reduction of Co0.4Fe0.4Ni0.2 on the surface of amine-functionalized CNTs. A synergistic effect between the high aspect ratio of the CNTs and the strong magnetic polarization of the Co0.4Fe0.4Ni0.2 led to stronger MR performance of the nanocomposite particle suspension. The MR fluid exhibits an unexpected high yield stress value that is 13 times greater than that of a CNT-Fe3O4 suspension at a magnetic field strength of 343 kA/m. Nonmagnetic CNTs form a three-dimensional networklike structure, imparting surprisingly large additional yield stress to the CNT-Co0.4Fe0.4Ni0.2 nanocomposite MR suspension. The low density of the CNTs resulted in much better long-term stability for the CNT-Co0.4Fe0.4Ni0.2 nanocomposite suspension than the MR fluid containing only Co0.4Fe0.4Ni0.2.
RESUMEN
The magnetorheological (MR) performance of suspensions based on magnetic (flaky Sendust (FS))-magnetic (Co0.4Fe0.4Ni0.2) nanocomposite particles was investigated by using a vibrating sample magnetometer and a rotational rheometer. Flaky Sendust@Co0.4Fe0.4Ni0.2 nanocomposite particles were fabricated through wet chemical synthesis of Co0.4Fe0.4Ni0.2 on the surface of FS. The density of the resultant FS@Co0.4Fe0.4Ni0.2 was less than that of FS due to the pore/void formation in the composite particles. Because of the high saturation magnetization of Co0.4Fe0.4Ni0.2 (165 emu/g), FS@Co0.4Fe0.4Ni0.2 (145 emu/g) exhibited greater magnetization than bare FS (130 emu/g), which resulted in the good performance of FS@Co0.4Fe0.4Ni0.2-based MR fluids: the suspension exhibited a remarkably high yield stress, almost one order greater than that of MR fluids based on hierarchically structured (HS) Fe3O4 particles. In addition, the high drag coefficient of FS@Co0.4Fe0.4Ni0.2 in the liquid medium, in conjunction with its lower density, resulted in a substantially improved long-term stability, better than that of Co0.4Fe0.4Ni0.2- or FS-based suspensions. Although the density of the FS@Co0.4Fe0.4Ni0.2 nanoparticles is higher than that of HS-Fe3O4 particles, their stability is much better than the stability of HS-Fe3O4 particle's suspension. Manufactured magnetic-magnetic nanocomposite particles provide a feasible MR suspension of high MR performance and long-term stability.