Green micellar liquid chromatographic method for simultaneous determination of antihistaminic drugs tripelennamine hydrochloride and diphenhydramine in pharmaceutical gel.

A new green micellar liquid chromatographic method has been developed and validated for the simultaneous determination of diphenhydramine (DPH) and tripelennamine hydrochloride (TRP) using a micellar mobile phase consisting of 1 mM Tween 20 in phosphate buffer pH 4:isopropanol (85:15, %v/v). The method was linear in the range of 4-150 and 5-120 µg/mL for TRP and DPH, respectively. The method was successfully applied for the simultaneous determination of DPH and TRP in a laboratory-prepared gel containing all possible excipients with mean percent recoveries ± standard deviation of 100.346 ± 1.265 and 100.754 ± 1.117 for TRP and DPH, respectively. The method was validated according to the International Conference on Harmonization guidelines. The method is confirmed to have excellent greenness.

Green method by National Environmental Methods Index and Eco-Scale Assessment for evaluation of gatifloxacin-based product by HPLC.

The literature reveals gaps in the availability of green analytical methods for assessing products containing gatifloxacin (GFX), a fluoroquinolone. Presently, method development is supported by tools such as the National Environmental Methods Index (NEMI) and Eco-Scale Assessment (ESA), which offer objective insights into the environmental friendliness of analytical procedures. The objective of this work was to develop and validate a green method by the NEMI and ESA to quantify GFX in eye drops using HPLC. The method utilized a C8 column (4.6 × 150 mm, 5 µm), with a mobile phase of purified water containing 2% acetic acid and ethanol (70:30, v/v). The injection volume was 10 µL and the flow rate was 0.7 mL/min in isocratic mode at 25°C, with detection performed at 292 nm. The method demonstrated linearity in the range of 2-20 µg/mL, and precision at intra-day (relative standard deviation [RSD] 1.44%), inter-day (RSD 3.45%), and inter-analyst (RSD 2.04%) levels. It was selective regarding the adjuvants of the final product (eye drops) and under forced degradation conditions. The method was accurate (recovery 101.07%) and robust. The retention time for GFX was approximately 3.5 min. The greenness of the method, as evaluated by the NEMI, showed four green quadrants, and by ESA, it achieved a score of 88.

First derivative synchronous spectrofluorimetric method for the simultaneous determination of tramadol and celecoxib in their dosage forms and human plasma.

One of the most common features of many different clinical conditions is pain; hence, there is a crucial need for eliminating or reducing it to a tolerable level to retrieve physical, psychological and social functioning. A first derivative synchronous spectrofluorimetry technique is proposed for the simultaneous determination of celecoxib and tramadol HCl, a recent coformulation authorized for treating acute pain in adults. The method includes using synchronous spectrofluorimetry at ∆λ = 80 nm where tramadol HCl was determined using first derivative technique at λ = 230.2 nm, while celecoxib was determined at λ = 288.24 nm. The proposed method was successfully applied to their co-formulated dosage forms in addition to spiked human plasma and validated in agreement with the guidelines of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH). The linear ranges were found to be 0.50-5.0 and 0.15-0.50, the limits of detection to be 0.088 and 0.011 and the limits of quantification to be 0.266 and 0.032 µg/ml for celecoxib and tramadol, respectively. Statistical analysis revealed no significant difference when compared with previously reported methods as evidenced by the values of the variance ratio F-test and Student t-test. The proposed method was successfully applied to commercial dosage forms and spiked human samples. Moreover, the greenness of the proposed method was investigated based on the analytical eco-scale approach, with the results showing an excellent green scale with a score of 95.

The ecological impact of liquid chromatographic methods reported for bioanalysis of COVID-19 drug, hydroxychloroquine: Insights on greenness assessment.

Hydroxychloroquine is a drug that has been widely used during the early stages of COVID-19 pandemic. Different liquid chromatographic methods have been reported for the analysis of hydroxychloroquine in various biological matrices such as human plasma, serum, whole blood, oral fluid, rat plasma and tissues. In this comparative study, the most popular tools used for assessing the greenness profile: National Environmental Methods Index (NEMI), Eco-Scale Assessment (ESA), Green Analytical Procedure Index (GAPI) and Analytical Greenness metric (AGREE) were utilized to evaluate the ecological impact of eighteen liquid chromatographic methods developed for the bioanalysis of COVID-19 drug; hydroxychloroquine. NEMI is the simplest tool for evaluating the greenness profile of developed methods, but it is the least informative approach as all the reported methods had the same NEMI pictograms. On the other hand, GAPI is a dependable tool providing a complete picture about the method greenness starting from sampling until the final determination. ESA and AGREE tools are digitally presented and more easily applied. Therefore, their utilization for greenness assessment is highly recommended. Selection of the highest eco-friendly analytical procedure is of a paramount importance for protecting human health and the environment. Considering the greenness of the analytical procedures is highly recommended before proceeding to routine use in order to minimize the chemical hazards to the environment. The most eco-friendly analytical procedures for the analysis of hydroxychloroquine in biological samples according to ESA, GAPI and AGREE tools will be highlighted and discussed.

An eco-friendly matrix-augmented fluorescence spectroscopic approach for the analysis of mitoxantrone, an oncogenic therapy; application to the dosage form and biological matrices.

Mitoxantrone (MXN) is a synthetic anthracenedione oncogenic therapy. It is often prescribed as an anticancer agent to manage a variety of cancers. A green, fast, and easy fluorimetric technique for the assay of MXN as a topoisomerase type II enzyme suppressor. An investigation of MXN's fluorescence behavior in various media and solvents constituted the basis for this new technique. Methanol was shown to enhance the intrinsic fluorescence considerably. After excitation at 610 nm, the highest fluorescence intensity was found at 675 nm. Various experimental parameters, such as media, solvents, and pH levels, were tested and adjusted. ICH (International Conference on Harmonization) guidelines were followed when validating procedures. It was possible to achieve linearity in the 0.02-1.50 µg ml-1 with the method. The sensitivity (in terms of limit of detection and limit of quantification) was 0.003 and 0.008 µg ml-1 , indicating low toxicity. As a result, the current technology has a remarkable recovery for detecting residues in diverse bodily fluids. Also, the quantum yield was estimated for the designed system. Finally, the method was rated by eco-scale scoring.

Design of a facile, green and efficient graphene oxide-based electrochemical sensor for analysis of acetaminophen drug.

In this study an efficient and environment friendly electrochemical sensor has been designed for the analysis of acetaminophen (APAP) drug. Electrochemical impedance spectroscopy, differential pulse voltammetry and cyclic voltammetric techniques were used to demonstrate the fabricated erGO/GCE sensor performance. Voltammetric assessment of acetaminophen drug was done using bare GC electrode, drop-casted GO/GC electrode and erGO/GCE electrochemical sensor. Proposed sensor was precisely validated for APAP detection by differential pulse voltammetric technique. Subsequently LOD, LOQ, sensitivity and linearity were determined and found to be 7.23 nM, 21.909 nM, 20.14 µA nM-1 cm-2 and 0.0219-2.30 µM, respectively. The diffusion coefficient of APAP was determined by chronoamperometry, and it was found to be 2.24 × 10-5 cm2.s-1. The synthetic and analytical steps were assessed as per the Green Chemistry's 12 Principles giving a 66 score (acceptable) and 93 score (excellent) for the said steps, respectively. Supplementary Information: The online version contains supplementary material available at 10.1007/s11696-022-02628-9.

Utility of Silver-nanoparticles for Nano-fluorimetric Determination of Vancomycin Hydrochloride in Pharmaceutical Formulation and Biological Fluids: Greenness Assessment.

Vancomycin hydrochloride (VANH) is a glycopeptide antibiotic commonly employed in the prophylaxis and therapy of various gram-positive bacterial life-threatening infections. Due to the narrow therapeutic window of VANH, its serum levels should be well-monitored to avoid its toxicity and to optimize its therapy. Herein, an innovative silver-nanoparticles enhanced fluorescence technique was designed for VANH rapid analysis in its pharmaceutical formulation and biological fluids. This technique is based on reinforcement of VANH fluorescence intensity with silver-nanoparticles that were synthesized by a redox reaction between VANH and silver nitrate in NaOH alkaline medium using polyvinylpyrrolidone as a stabilizer. The produced silver-nanoparticles were characterized by using UV-visible spectroscopy where they have an intense absorption maximum at 415 nm and transmission electron microscope (TEM) micrograph where they are spherical in shape with smooth surface morphology and size of 10.74 ± 2.44 nm. The fluorescence intensity was measured at 394 nm after excitation at 259 nm. Under optimum conditions, a good linear relationship was accomplished between the VANH concentration and the fluorescence intensity in a range of (1-36) ng/mL with a limit of detection of 0.29 ng/mL. Greenness assessment was performed using two assessment tools namely; eco-scale scoring and green analytical procedure index revealing excellent greenness of the proposed technique. The proposed technique was validated according to the International Conference on Harmonisation (ICH) recommendations and statistically compared with the reported HPLC method revealing no significant difference concerning accuracy and precision at p = 0.05. The proposed technique depended primarily on water as a cheap and eco-friendly solvent.

Unique green chromatography method for the determination of serotonin receptor antagonist (Ondansetron hydrochloride) related substances in a liquid formulation, robustness by quality by design-based design of experiments approach.

Serotonin receptor antagonist drug Ondansetron hydrochloride injectable formulation containing all related substances was identified and quantified by a single, simple, sensitive, eco-friendly, and green high-performance liquid chromatography method. The disseverment of all impurities was achieved with the Discovery Cyano (250 × 4.6) mm, 5 µm column. The gradient program was composed of pH 5.7 phosphate buffer as mobile phase A and acetonitrile as mobile phase B. The flow rate, column compartment temperature, and detection wavelengths were 0.9 mL/min, 30°C, and 216 nm, respectively. The method was validated as per current regulatory guidelines. The obtained %relative standard deviation for the precision results was between 0.55 and 2.72% for all impurities. The correlation coefficient values from the linearity experiment for impurities and analyte were more than 0.995. The accuracy results were obtained between 88.4 and 113.0% for all impurities. Both sample and standard solutions showed 24 h stability at benchtop and refrigerator conditions. All impurities and analytes met the specificity and mass balance for all forced degradation conditions. Quality-by-design-based design of experiments was utilized to establish the method's robustness. Method greenness was assessed by using the current advanced tool green analytical procedure index, National Environmental Methods Index, and analytical eco-scale.

Environmental impact of the reported chromatographic methods for the determination of the first FDA-Approved therapy for COVID-19 Patients, Remdesivir: A comparative study.

Remdesivir (REM) is considered the first therapeutic option approved by US Food and Drug Administration (FDA) for clinical care in case of hospitalized patients suffering in COVID-19 epidemic. In the presented multilateral comparative search, four eco friendlessness approaches -National Environmental Methods Index (NEMI), Eco-Scale Assessment (ESA), Green Analytical Procedure Index (GAPI), and Analytical Greenness metric (AGREE) are tested to assess 16 analytical chromatographic procedures reported for the analysis of the commonly used antiviral drug; Remdesivir (REM). The values of testing more than one approach when estimating the eco-friendly characters for analytical methods are illustrated in this study. On the light of the outcomes, ESA and AGREE approaches are recommended as they are easily applied and digitally presented. Furthermore, GAPI is also a reliable tool in terms of comprehensiveness for the whole analytical procedures, from sampling till the final assessment. NEMI is the easiest and fastest greenness evaluation tool; however, the information it provides is particularly of limited scope and sometimes inaccurate. To ensure greenness of chromatographic analytical methods, there must be clear planning beforehand, to reduce chemical hazards sent to environment. Additionally, it is highly recommended in method validation protocols to consider the greenness of a given analytical procedure before releasing to routine use. The LC-MS/MS analysis for the active metabolite of REM (Nuc) reported by Avataneo et al. and Du et al. proved to be the best bio-analytical methods regarding the environmental aspects depending on the GAPI and AGREE tools. However, the HPLC method for REM analysis in intravenous solution reported by Jitta et al. proved to be the greenest analytical method for determination of REM in the pharmaceutical dosage forms according to the ESA, GAPI, and AGREE tools.

Facile spectrofluorimetric quantitation of octreotide, a synthetic peptide, in its pure form and pharmaceutical formulation; evaluation of the method's greenness.

A new, rapid, highly sensitive, and affordable spectrofluorimetric approach has been constructed and validated for the determination of octreotide in its authentic form and pharmaceutical dosage form. Octreotide is an important synthetic analog of the naturally occurring somatostatin hormone. The developed spectrofluorimetric approach is actually dependent on the measurement of octreotide native fluorescence at emission wavelength of 342 nm after excitation at 218 nm. At optimal reaction conditions, the calibration curve has been constructed over the concentration range 200-2000 ng ml-1 , with excellent linearity. The limits of detection and quantitation values were found to be 55 and 169 ng ml-1 , respectively. The developed approach has been effectively used to determine octreotide in its pharmaceutical ampoules, without interference from the excipients in the dosage form. The developed approach is simple, time-saving, and does not require multiple pretreatment steps for samples, costly apparatus, or dangerous materials. As a result, it can be used to detect and quantify octreotide acetate in quality control laboratories.

Ecologically evaluated and FDA-validated HPTLC method for assay of pregabalin and tramadol in human biological fluids.

The introduced research presents a novel in vivo quantitative method for assay of mixtures of pregabalin and tramadol as a common combinations approved for treatment of neuropathic pain. Green analytical chemistry is a recently emerging science concerned with control of the use of chemicals harmful to the environment in various analytical methods. Consequently, a green high-performance thin layer chromatography (HPTLC) method was achieved for determination of the mixture in human plasma and urine satisfying both analytical and environmental standards. The separation was achieved on HPTLC sheets using a separating mixture of ethanol-ethyl acetate-acetone-ammonia solution (8:2:1:0.05, by volume) as a mobile phase. The sheets were dried in air then scanned at two wavelengths. For tramadol, 220 nm was chosen; however, pregabalin is an unconjugated drug, so its determination was a challenge. Hence for pregabalin, the plates were sprayed with ethanolic solution of ninhydrin (3%, w/v), to obtain a conjugated complex, which could be assessed at 550 nm. Furthermore, the developed method fulfilled the US Food and Drug Administration validation guidelines, and proved to be useful in therapeutic drug monitoring of this combination. The Eco-scale assessment protocol was implemented to determine the greenness profile of the applied method.

Eco-friendly UPLC-MS/MS analysis of possible add-on therapy for COVID-19 in human plasma: Insights of greenness assessment.

Facing the pandemic COVID-19 is of highest priority for all researchers nowadays. Recent statistics indicate that the majority of the cases are home-treated. Two drugs of interest, Guaifenesin and Bromohexine HCl, are among the add-on therapy for treatment of COVID-19 mild cases, which has raised the need for their simultaneous determination. The analysis of the two drugs of interest was described using ultra-performance liquid chromatography-tandem mass spectrometric (UPLC-MS/MS) in plasma of healthy human volunteers using tetryzoline HCl as an internal standard (IS) after liquid-liquid extraction. The applied chromatographic conditions were Kinetex C18 (100 Å, 2.6 µm X 50 mm X 4.6 mm) column and a mixture of methanol: water (95: 5, v/v) as a mobile phase at flow rate 1 mL/min. The positive ionization mode was used for detecting the ions, by observing the pairs of transition m/z 199 < 125 for GUF, m/z 377 < 114 for BRM and m/z 201 < 131 for IS. The linearity range was from 50 to 1500 ng/mL for GUF and 0.5-50 µg/mL for BRM. Limit of detection (LOD) was found to be 35.16 and 0.43 ng/ml for GUF and BRM, respectively. The method was validated according to FDA guidance. The proposed method was assessed to be more eco-friendly versus the reported method using the greenness assessment tools: National Environmental Methods Index (NEMI), Assessment of Green Profile (AGP), Green Analytical Procedure Index (GAPI) and Eco-Scale. The proposed method was applied for the application of a pilot pharmacokinetic study.

Evaluation of assay and in-vitro dissolution profile of certain fixed-dose combination using green analytical method.

OBJECTIVES: The pharmaceutical industry and the National Regulatory Authorities (NRAs) are now focusing on the dissolution of multi-component drugs for quality control testing and predicting in vivo results to further consolidation of the biowaiver concept. The mixed formulation of Ciprofloxacin hydrochloride (CIP) and Metronidazole (MET) have been used as a model for simultaneous determination and obtaining in vitro dissolution profiles by using green analysis method namely (UV-CWT(Db4, a=490)). MATERIAL AND METHODS: The proposed method (UV-CWT(Db4, a=490)) includes UV detection combined with Continuous Wavelet Transform (CWT) with Daubechies family and the order of fourth at the scaling factor (a=490) has been used and validated for analyzing and obtaining the dissolution profiles of the fixed-dose combination (CIP-MET). RESULTS: The proposed method (UV-CWT(Db4, a=490)) has been validated effectively in accordance with ICH rules, regarding linearity, specificity, rigor, and preciseness of the working range (3.0-16.0µg/mL) for both (CIP) and (MET), respectively. As well as figures of merit were concluded. The dissolution profiles of CIP-MET tablets were acquired by the proposed (UV-CWT (Db4, a=490)) and HPLC reported methods were conveniently compared using the indicators f1 and f2 ("difference" and "similarity") the results ensured that there were no statistically differences between the methods. In addition, the green assessment tool, namely analytical eco-scale, evaluated and compared the greenness of the suggested method (UV-CWT(Db4, a=490)) and HPLC reported one. CONCLUSION: The suggested process (UV-CWT(Db4, a=490)) was considered as an excellent green, rapid, accurate, economical and minimum-steps method for simultaneously resolve and construct the dissolution curves of a fixed-dose combination drug (CIP-MET) in a short time and without the use of organic solvents, enabling significant labor and resource savings.

Impurity profiling high-performance-thin-layer chromatography method involving the assay of essential human micronutrient niacin with eco-scale assessment.

Currently, analytical scientists are paying special attention to reducing reliance on hazardous chemicals in various analytical methods. By embracing this concept, we developed an eco-friendly high-performancethin-layer chromatography (HPTLC) method as an alternative for the conventional HPLC method for the determination of an essential human micronutrient, niacin (NIA), which is used improve the lipid profile of patients. Furthermore, the proposed HPTLC method is capable of determining the structurally related impurities of NIA such as pyridine-2,5-dicarboxylic acid, isonicotinic acid, pyridine, and 5-ethyl-2-methylpyridine, which exhibit nephrotoxic and hepatotoxic effects. The separation of this challenging mixture was achieved on HPTLC sheets using a mixture of ethyl acetate/ethanol/ammonia solution (6:4:0.05, v/v/v), and then the dried plates were scanned at 254 nm. The analytical eco-scale assessment protocol was used to assess the greenness profile of the presented method and compare it with the reported HPLC method. The suggested method was found to be greener with regard to the consumption of solvents and the yielding of waste. The results suggest that the described method can be safely implemented for the routine analysis of NIA pharmaceutical dosage without the interference of potential impurities in quality control laboratories.

Laboratory-Scale Preparation and Characterization of Dried Extract of Muirapuama (Ptychopetalumolacoides Benth) by Green Analytical Techniques.

This work reports on the preparation of a drying process from the ethanolic extract of Muirapuama and its characterization through green analytical techniques. The spray-drying processes were performed by using ethanolic extract in a ratio of 1:1 extract/excipient and 32 factorial design. The properties of dried powder were investigated in terms of total flavonoid content, moisture content, powder yield, and particle size distribution. An analytical eco-scale was applied to assess the greenness of the developed protocol. Ultra-high performance liquid chromatography (UHPLC)with reduced solvent consumption in the analysis was compared to the conventional HPLC method. A Fourier transform near-infrared (FT-NIR) spectroscopic method was applied based on the principal component scores for the prediction of extract/excipient mixtures and partial least squares regression model for quantitative analysis. NIR spectroscopy is an economic, powerful, and fast methodology for the detection of excipient in muirapuama dried extracts, generating no residue in the analysis. Scanning electron microscopy (SEM) images showed samples with a higher concentration of excipient, presenting better morphological characteristics and a lower moisture absorption rate. An eco-scale score value of 85 was achieved for UHPLC and 100 was achieved for NIR (excellent green analysis). Above all, these methods are rapid and green for the routine analysis of herbal medicines based on dried extracts.

Organic Acids and Polyphenols Determination in Polish Wines by Ultrasound-Assisted Solvent Extraction of Porous Membrane-Packed Liquid Samples.

In the near future, Poland is going to have more and more favorable conditions for viticulture. Organic acids and polyphenols are among the most commonly analyzed compounds due to their beneficial properties for human health and their importance in the winemaking process. In this work, a new technique involving ultrasound-assisted solvent extraction of porous membrane-packed liquid samples (UASE-PMLS) was for the first time described and applied for real samples. The methodology based on UASE-PMLS for organic acids and polyphenols in wine samples was optimized and validated. Using the new technique coupled to GC-MS, organic acids and polyphenols were evaluated in Polish wine samples. Extraction solvent, extraction temperature, derivatization time and sample pH were optimized. Chemometric tools were used for data treatment. Good linearity was obtained for the concentration ranges evaluated with r values between 0.9852 and 0.9993. All parameters of method validation (intra- and inter-day precision and matrix effect) were over 80% with coefficient of variation (CV) up to 17%. Recovery was between (92.0 ± 8.5)% and (113 ± 16)%. Finally, green assessment was evaluated using Analytical Eco-Scale and Green Analytical Procedure Index (GAPI). The UASE-PMLS is characterized by many advantages, e.g., the extraction process is fast and easy coupled to GC-MS. Regarding other extraction techniques, the amount of used solvent is minimum, and no waste is generated. Therefore, it is an environmentally friendly technique.

A Green Protocol for Microwave-Assisted Extraction of Volatile Oil Terpenes from Pterodon emarginatus Vogel. (Fabaceae).

Microwave-assisted extraction of volatile oils (MAE) potentially offers a more efficient and bio-sustainable method than conventional extraction by Clevenger apparatus (CE). This study aimed to optimise the MAE of the volatile oil from Pterodon emarginatus fruits and characterise the volatile compounds. A 2³ full-factorial central composite design and response surface methodology were used to evaluate the effects of time (min), moisture (%) and microwave power (W) on the extraction yield. The process optimisation was based on the desirability function approach. The reaction time and moisture conditions were standardised in these analyses. The volatile oil composition was analysed by Gas Chromatography/Mass Spectrometry (GC/MS) in order to compare techniques extractions influences. Microwave irradiation showed excellent performance for extraction of the volatile oil from Pterodon emarginatus and there were some advantages in compare to conventional method with respect to the time (14 times), energy (6 times), reagents amounts and waste formation. About chemical composition presents significant differences with the type of extraction. Caryophyllene (25.65%) and trans-α-bisabolol (6.24%) were identified as major components in MAE sample while caryophyllene (6.75%) and γ-elemene (7.02%) are the components with higher relative percentage in CE samples. The microwaves assisted process shown an increase of economic interested compounds present in volatile oil.

Comparison of Two Methods for the Determination of Selected Pesticides in Honey and Honeybee Samples.

Developed and validated analytical methods for the determination of a wide spectrum of pesticide residues in honey and honeybee samples after the modification of QuEChERS extraction in combination with gas chromatography⁻tandem quadrupole mass spectrometry (GC-MS/MS) and liquid chromatography⁻tandem quadrupole mass spectrometry (LC-MS/MS) were discussed and compared. The developed methods were evaluated regarding the utilized equipment and reagents using Eco-Scale and compared in terms of extraction time, accuracy, precision, sensitivity and versatility, with similar procedures. The results proved that the QuEChERS protocol in combination with LC and GC techniques fulfills the requirements of green analytical chemistry, so it can be used as a tool in environmental monitoring. The recovery was 85⁻116% for honey and 85.5⁻103.5% for honeybee samples. The developed methods were successfully applied in monitoring real samples collected from three districts of Pomerania in Poland. Analysis of real samples revealed the presence of the following pesticides: bifenthrin, fenpyroximate, methidathione, spinosad, thiamethoxam, triazophos, metconazole and cypermethrin at levels higher than the MRLs established by the EU.

Green approach using monolithic column for simultaneous determination of coformulated drugs.

Green chemistry and sustainability is now entirely encompassed across the majority of pharmaceutical companies and research labs. Researchers' attention is careworn toward implementing the green analytical chemistry principles for more eco-friendly analytical methodologies. Solvents play a dominant role in determining the greenness of the analytical procedure. Using safer solvents, the greenness profile of the methodology could be increased remarkably. In this context, a green chromatographic method has been developed and validated for the simultaneous determination of phenylephrine, paracetamol, and guaifenesin in their ternary pharmaceutical mixture. The chromatographic separation was carried out using monolithic column and green solvents as mobile phase. The use of monolithic column allows efficient separation protocols at higher flow rates, which results in short time of analysis. Two-factor three-level experimental design was used to optimize the chromatographic conditions. The greenness profile of the proposed methodology was assessed using eco-scale as a green metrics and was found to be an excellent green method with regard to the usage and production of hazardous chemicals and solvents, energy consumption, and amount of produced waste. The proposed method improved the environmental impact without compromising the analytical performance criteria and could be used as a safer alternate for the routine analysis of the studied drugs.

Green Chemistry Metrics with Special Reference to Green Analytical Chemistry.

The concept of green chemistry is widely recognized in chemical laboratories. To properly measure an environmental impact of chemical processes, dedicated assessment tools are required. This paper summarizes the current state of knowledge in the field of development of green chemistry and green analytical chemistry metrics. The diverse methods used for evaluation of the greenness of organic synthesis, such as eco-footprint, E-Factor, EATOS, and Eco-Scale are described. Both the well-established and recently developed green analytical chemistry metrics, including NEMI labeling and analytical Eco-scale, are presented. Additionally, this paper focuses on the possibility of the use of multivariate statistics in evaluation of environmental impact of analytical procedures. All the above metrics are compared and discussed in terms of their advantages and disadvantages. The current needs and future perspectives in green chemistry metrics are also discussed.