Thermally Conductive Elastomer Composites with High Toughness, Softness, and Resilience Enabled by Regulating Interfacial Structure and Dynamics.

The emerging applications of thermally conductive elastomer composites in modern electronic devices for heat dissipation require them to maintain both high toughness and resilience under thermomechanical stresses. However, such a combination of thermal conductivity and desired mechanical characteristics is extremely challenging to achieve in elastomer composites. Here this long-standing mismatch is resolved via regulating interfacial structure and dynamics response. This regulation is realized both by tuning the molecular weight of the dangling chains in the polymer networks and by silane grafting of the fillers, thereby creating a broad dynamic-gradient interfacial region comprising of entanglements. These entanglements can provide the slipping topological constraint that allows for tension equalization between and along the chains, while also tightening into rigid knots to prevent chain disentanglement upon stretching. Combined with ultrahigh loading of aluminum-fillers (90 wt%), this design provides a low Young's modulus (350.0 kPa), high fracture toughness (831.5 J m-2), excellent resilience (79%) and enhanced thermal conductivity (3.20 W m-1 k-1). This work presents a generalizable preparation strategy toward engineering soft, tough, and resilient high-filled elastomer composites, suitable for complex environments, such as automotive electronics, and wearable devices.

Revealing the synergistic effect of hydration and pulsed ultrasound on the emulsifying properties of silkworm pupa protein and its stabilized emulsion.

BACKGROUND: Silkworm (Bombyx moil L.) Pupa protein (SPP) is a high-quality insect protein and is considered a sustainable alternative source for traditional animal food protein. However, the utilization of SPP is limited because of its low solubility and emulsifying ability. In the present study, the synergistic effect of hydration and pulsed ultrasound on the physicochemical properties of SPP and SPP-stabilized Pickering emulsions was evaluated. RESULTS: Pulsed ultrasound changed the particle size of SPP and its conformation. As the pulsed ultrasound increased from 0 s to 5 s, the α-helix and SS contents of SPP decreased, whereas the ß-sheet and SH contents increased, which in turn improved its solubility and amphiphilicity. As a result, the SPP treated by a combination of 12 h of hydration and 3 s of ultrasound exhibited a contact angle of 74.95°, hydrophobicity of 904.83, EAI of 6.66 m2 g-1 and ESI of 190.69 min. Compared with the combination of 1 h of hydration and 5 s of ultrasound, the combination of 12 h of hydration and 3 s of ultrasound exerted more soluble and hydrophobic SPP, whereas the EAI and ESI of the samples were higher. Notably, the ultrasound-treated SPP can form a stable gel-like emulsion (oil fraction ranging from 70% to 80%). CONCLUSION: The combination of hydration and ultrasound can effectively improve the physicochemical characteristics of SPP as well as its emulsion stability. Sufficient hydration is a cost-effective method for facilitating the modification of proteins by ultrasound treatment. © 2024 Society of Chemical Industry.

Classical and Nonclassical Nucleation and Growth Mechanisms for Nanoparticle Formation.

All solid materials are created via nucleation. In this evolutionary process, nuclei form in solution or at interfaces, expand by monomeric growth and oriented attachment, and undergo phase transformation. Nucleation determines the location and size of nuclei, whereas growth controls the size, shape, and aggregation of newly formed nanoparticles. These physical properties of nanoparticles can affect their functionalities, reactivities, and porosities, as well as their fate and transport. Recent advances in nanoscale analytical technologies allow in situ real-time observations, enabling us to uncover the molecular nature of nuclei and the critical controlling factors for nucleation and growth. Although a single theory cannot yet fully explain such evolving processes, we have started to better understand how both classical andnonclassical theories can work together, and we have begun to recognize the importance of connecting these theories. This review discusses the recent convergence of knowledge about the nucleation and growth of nanoparticles.

Correlation between Interfacial Structures and Device Performance: The Double-Edged Sword Effect of Lead Iodide in Perovskite Solar Cells.

The interfacial electronic structure of perovskite layers and transport layers is critical for the performance and stability of perovskite solar cells (PSCs). The device performance of PSCs can generally be improved by adding a slight excess of lead iodide (PbI2 ) to the precursor solution. However, its underlying working mechanism is controversial. Here, we performed a comprehensive study of the electronic structures at the interface between CH3 NH3 PbI3 and C60 with and without the modification of PbI2 using in situ photoemission spectroscopy measurements. The correlation between the interfacial structures and the device performance was explored based on performance and stability tests. We found that there is an interfacial dipole reversal, and the downward band bending is larger at the CH3 NH3 PbI3 /C60 interface with the modification of PbI2 as compared to that without PbI2 . Therefore, PSCs with PbI2 modification exhibit faster charge carrier transport and slower carrier recombination. Nevertheless, the modification of PbI2 undermines the device stability due to aggravated iodide migration. Our findings provide a fundamental understanding of the CH3 NH3 PbI3 /C60 interfacial structure from the perspective of the atomic layer and insight into the double-edged sword effect of PbI2 as an additive.

Ag22 Nanoclusters with Thermally Activated Delayed Fluorescence Protected by Ag/Cyanurate/Phosphine Metallamacrocyclic Monolayers through In-Situ Ligand Transesterification.

The composition of protection monolayer exerts great influence on the molecular and electronic structures of atomically precise monolayer protected metal nanoclusters. Four isostructural Ag/cyanurate/phosphine metallamacrocyclic monolayer protected Ag22 nanoclusters are synthesized by kinetically controlled in-situ ligand formation-driven strategy. These eight-electron superatomic silver nanoclusters feature an unprecedented interfacial bonding structure with diverse E-Ag (E=O/N/P/Ag) interactions between the Ag13 core and metallamacrocyclic monolayer, and displays thermally activated delayed fluorescence (TADF), benefiting from their distinct donor-acceptor type electronic structures. This work not only unmasks a new core-shell interface involving cyanurate ligand but also underlines the significance of high-electron-affinity N-heterocyclic ligand in synthesizing TADF metal nanoclusters. This is the first mixed valence Ag0/I nanocluster with TADF characteristic.

Surface Acidity and As(V) Complexation of Iron Oxyhydroxides: Insights from First-Principles Molecular Dynamics Simulations.

Iron hydroxides are ubiquitous in soils and aquifers and have been adopted as adsorbents for As(V) removal. However, the complexation mechanisms of As(V) have not been well understood due to the lack of information on the reactive sites and acidities of iron hydroxides. In this work, we first calculated the acidity constants (pKas) of surface groups on lepidocrocite (010), (001), and (100) surfaces by using the first-principles molecular dynamics (FPMD)-based vertical energy gap method. Then, the desorption free energies of As(V) on goethite (110) and lepidocrocite (001) surfaces were calculated by using constrained FPMD simulations. The point of zero charges and reactive sites of individual surfaces were obtained based on the calculated pKas. The structures, thermodynamics, and pH dependence for As(V) complexation were derived by integrating the pKas and desorption free energies. The pKa data sets obtained are fundamental parameters that control the charging and adsorption behavior of iron oxyhydroxides and will be very useful in investigating the adsorption processes on these minerals. The pH-dependent complexation mechanisms of As(V) derived in this study would be helpful for the development of effective adsorbent materials and the prediction of the long-term behavior of As(V) in natural environments.

Design principles of oil-in-water emulsions with functionalized interfaces: Mixed, multilayer, and covalent complex structures.

Proteins and polysaccharides are widely used as ingredients in food emulsions due to their high biocompatibility, good biodegradability, and a broad range of techno-functionalities. In particular, they are used as emulsifiers, texture modifiers, and stabilizers in many emulsion-based foods. Moreover, the functionality of these biopolymers can be extended by forming protein-polysaccharide complexes that can be used to modulate the characteristics of the oil-water interface, thereby altering the stability and performance of food emulsions. This review highlights a number of approaches to modulate the interfacial properties of oil-in-water emulsions based on the utilization of protein-polysaccharide complexes: direct mixing, layer-by-layer assembly, and conjugation. Besides, the impact of altering the interfacial properties on emulsion performance is highlighted, including their formation, stability, and functional attributes. Interfacial engineering approaches can be used to tailor the properties of food emulsions to particular applications. For instance, they can be used to create emulsion-based delivery systems for bioactive agents, such as vitamins, nutraceuticals, antimicrobials, colors, flavors, and antioxidants. Moreover, they can be used to create emulsion-based foods with lower calorie contents and enhanced satiety responses. Nevertheless, it is important to account for various factors when developing successful interfacial engineering technologies, including safety concerns, production costs, environmental impact, sustainability, government regulations, and labeling issues.

Combination of NMR Methods To Reveal the Interfacial Structure of a Pharmaceutical Nanocrystal and Nanococrystal in the Suspended State.

The detailed structure of a pharmaceutical nanosuspension was investigated using three nuclear magnetic resonance (NMR) methods: solid-state, solution-state, and high resolution-magic angle spinning (HR-MAS) NMR. Carbamazepine (CBZ) and CBZ-saccharin (SAC) cocrystal nanosuspensions were prepared by wet-milling with hydroxypropyl methylcellulose (HPMC) and sodium dodecyl sulfate (SDS) as stabilizing agents. Solid-state 13C NMR indicated the presence of not only the crystalline drug substance but also solid-state HPMC, even though HPMC was used as an aqueous solution to prepare the nanosuspensions. Solution-state 1H NMR of the nanosuspensions with and without ultracentrifugation pretreatment indicated that a fraction of the CBZ, SAC, and SDS formed a solid or semisolid phase on the surface of the nanoparticles and was in equilibrium between the dissolved and undissolved states. 1H HR-MAS NMR was highly effective in detecting and quantifying the semisolid phase on the surface of the nanoparticles. From these comprehensive NMR studies, it was concluded that the nanosuspension was composed of crystalline drug core particles surrounded by a semisolid phase consisting of the drug and stabilizing agents. The semisolid phase on the nanoparticle surface was in equilibrium with the solution phase and contributed to the stabilization of the nanoparticle by steric hindrance and electrostatic repulsion.

Interfacial Structure and Interaction of Kaolinite Intercalated with N-methylformamide Insight from Molecular Dynamics Modeling.

The evolution of basal spacing and interfacial structure of kaolinite-N-methylformamide (NMF) complexes during the intercalation process were difficult to obtain using experimental methods. In present study, a series of kaolinite-NMF complex models with various numbers of NMF molecules in the interlayer space were constructed to mimic the progressive stage of the intercalation process of kaolinite intercalated by NMF. The MD simulations were performed on these models to explore the evolution of basal spacing and interfacial structure of kaolinite-NMF complexes during the intercalation process. It was found that the basal spacing of complex was stabilized at 11 Å during the intercalation process, where the molecular plane of NMF oriented at small angles with respect to the interlayer surface with the C=O groups and N-H bonds pointing toward the octahedral and tetrahedral surfaces, respectively, due to the hydrogen bonding interactions. The basal spacing can be enlarged to larger values with the prerequisite of overcoming the energy barrier. With the increase of basal spacing during the intercalation process, the NMF were rearranged as a pillar with the molecular planes orienting at higher angles with respect to the interlayer surface, and then developed to disordered bilayer structure. For the interfacial interaction of kaolinite-NMF complex, both the octahedral surface and tetrahedral surface showed binding affinity to the NMF, which is the driving force for the intercalation of NMF in kaolinite. The octahedral surface displays stronger binding affinity to the NMF in terms of the H-bonds and energetics compared to the tetrahedral surface partially due to the highly active surface hydroxyl groups. The present study provides insight into the basal spacing evolution, and interfacial structure and interaction of kaolinite-NMF complexes, which can enhance the understanding of kaolinite intercalated by small molecules.

MDTS: automatic complex materials design using Monte Carlo tree search.

Complex materials design is often represented as a black-box combinatorial optimization problem. In this paper, we present a novel python library called MDTS (Materials Design using Tree Search). Our algorithm employs a Monte Carlo tree search approach, which has shown exceptional performance in computer Go game. Unlike evolutionary algorithms that require user intervention to set parameters appropriately, MDTS has no tuning parameters and works autonomously in various problems. In comparison to a Bayesian optimization package, our algorithm showed competitive search efficiency and superior scalability. We succeeded in designing large Silicon-Germanium (Si-Ge) alloy structures that Bayesian optimization could not deal with due to excessive computational cost. MDTS is available at https://github.com/tsudalab/MDTS.

The Influence of Anion Shape on the Electrical Double Layer Microstructure and Capacitance of Ionic Liquids-Based Supercapacitors by Molecular Simulations.

Room-temperature ionic liquids (RTILs) are an emerging class of electrolytes for supercapacitors. In this work, we investigate the effects of different supercapacitor models and anion shape on the electrical double layers (EDLs) of two different RTILs: 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Emim][Tf2N]) and 1-ethyl-3-methylimidazolium 2-(cyano)pyrrolide ([Emim][CNPyr]) by molecular dynamics (MD) simulation. The EDL microstructure is represented by number densities of cations and anions, and the potential drop near neutral and charged electrodes reveal that the supercapacitor model with a single electrode has the same EDL structure as the model with two opposite electrodes. Nevertheless, the employment of the one-electrode model without tuning the bulk density of RTILs is more time-saving in contrast to the two-electrode one. With the one-electrode model, our simulation demonstrated that the shapes of anions significantly imposed effects on the microstructure of EDLs. The EDL differential capacitance vs. potential (C-V) curves of [Emim][CNPyr] electrolyte exhibit higher differential capacitance at positive potentials. The modeling study provides microscopic insight into the EDLs structure of RTILs with different anion shapes.

Interface Modulation for the Heterointegration of Diamond on Si.

Along with the increasing integration density and decreased feature size of current semiconductor technology, heterointegration of the Si-based devices with diamond has acted as a promising strategy to relieve the existing heat dissipation problem. As one of the heterointegration methods, the microwave plasma chemical vapor deposition (MPCVD) method is utilized to synthesize large-scale diamond films on a Si substrate, while distinct structures appear at the Si-diamond interface. Investigation of the formation mechanisms and modulation strategies of the interface is crucial to optimize the heat dissipation behaviors. By taking advantage of electron microscopy, the formation of the epitaxial ß-SiC interlayer is found to be caused by the interaction between the anisotropically sputtered Si and the deposited amorphous carbon. Compared with the randomly oriented ß-SiC interlayer, larger diamond grain sizes can be obtained on the epitaxial ß-SiC interlayer under the same synthesis condition. Moreover, due to the competitive interfacial reactions, the epitaxial ß-SiC interlayer thickness can be reduced by increasing the CH4/H2 ratio (from 3% to 10%), while further increase in the ratio (to 20%) can lead to the broken of the epitaxial relationship. The above findings are expected to provide interfacial design strategies for multiple large-scale diamond applications.

Modulation of Lipid Digestion by Nanoarchitectonics of Complex Interfacial Structures with Tween 80 and Lecithin.

In recent years, there has been a growing interest in regulating lipid digestion through the construction of various interfacial structures. In the present work, a series of complex interfacial structures were designed by combining Tween 80 in the aqueous phase and lecithin in the oil phase at different concentration ratios. The emulsification properties, the roles in regulating lipid digestion, and the interfacial dilatational rheological properties of the composite emulsifying systems were characterized. The results showed that the combination of Tween 80 and lecithin at different ratios could effectively modulate the rate of lipid digestion. The polyoxyethylene chains of Tween 80 formed a network, that provided a spatial obstacle for the adsorption of bile salts and lipases. Thus, Tween 80 significantly delayed the lipid digestion. The introduction of lecithin gradually replaced Tween 80 molecules at the interface, thus providing space for the adsorption of bile salts and lipases. In addition, as the ratio of lecithin concentration to Tween 80 increased, lecithin gradually became the dominant factor in the interfacial properties. As a result, the rate of lipid digestion was accelerated. Therefore, by compounding different ratios of lecithin and Tween 80, a series of emulsions with different lipid digestion rates were obtained. This research provides a basis for rationally designing food emulsions according to specific needs.

Enhancing the dielectric and thermal properties of polytetrafluoroethylene-based composites through designing and constructing a novel interfacial structure.

Polytetrafluoroethylene (PTFE) is widely used as a fundamental core material for high-frequency and high-speed signal transmission fields due to its excellent dielectric properties. However, the high coefficient of thermal expansion (CTE) characteristic of PTFE severely limits its practical application. The CTE of PTFE can be reduced by filling with SiO2, which is always accompanied by a rapid deterioration of dielectric properties due to the poor interfacial compatibility between SiO2 and PTFE matrix. In this paper, the challenge of synergistic regulation of dielectric and CTE properties for PTFE-based composites is overcome by constructing an interfacial structure with physical interactions. Micro-mesoporous SiO2 (mSiO2) is prepared and introduced as a filler, compared with smooth surface SiO2 (sSiO2), the presence of micro-mesoporous in mSiO2 allows PTFE molecular chains to be adsorbed on the surface or in the pore channels of mSiO2, which improves the interfacial combination of the mSiO2/PTFE composites through the physical interaction between mSiO2 and PTFE. The results show that mSiO2/PTFE composite exhibits a lower CTE (58 ppm °C-1) while maintaining a lower dielectric constant (εr, 2.29, 30 GHz) with dielectric loss (tan Î´, 2.31 × 10-3, 30 GHz) at a filler addition of 30 vol%, as compared with that of the sSiO2/PTFE composites. This work provides a new strategy for fabricating PTFE-based composites with low CTE as well as low εr and tan Î´.

Nanocluster Surface Microenvironment Modulates Electrocatalytic CO2 Reduction.

The catalytic activity and product selectivity of the electrochemical CO2 reduction reaction (eCO2RR) depend strongly on the local microenvironment of mass diffusion at the nanostructured catalyst and electrolyte interface. Achieving a molecular-level understanding of the electrocatalytic reaction requires the development of tunable metal-ligand interfacial structures with atomic precision, which is highly challenging. Here, the synthesis and molecular structure of a 25-atom silver nanocluster interfaced with an organic shell comprising 18 thiolate ligands are presented. The locally induced hydrophobicity by bulky alkyl functionality near the surface of the Ag25 cluster dramatically enhances the eCO2RR activity (CO Faradaic efficiency, FECO: 90.3%) with higher CO partial current density (jCO) in an H-cell compared to Ag25 cluster (FECO: 66.6%) with confined hydrophilicity, which modulates surface interactions with water and CO2. Remarkably, the hydrophobic Ag25 cluster exhibits jCO as high as -240 mA cm-2 with FECO >90% at -3.4 V cell potential in a gas-fed membrane electrode assembly device. Furthermore, this cluster demonstrates stable eCO2RR over 120 h. Operando surface-enhanced infrared absorption spectroscopy and theoretical simulations reveal how the ligands alter the neighboring water structure and *CO intermediates, impacting the intrinsic eCO2RR activity, which provides atomistic mechanistic insights into the crucial role of confined hydrophobicity.

Interfacial Optimization for AlN/Diamond Heterostructures via Machine Learning Potential Molecular Dynamics Investigation of the Mechanical Properties.

AlN/diamond heterostructures hold tremendous promise for the development of next-generation high-power electronic devices due to their ultrawide band gaps and other exceptional properties. However, the poor adhesion at the AlN/diamond interface is a significant challenge that will lead to film delamination and device performance degradation. In this study, the uniaxial tensile failure of the AlN/diamond heterogeneous interfaces was investigated by molecular dynamics simulations based on a neuroevolutionary machine learning potential (NEP) model. The interatomic interactions can be successfully described by trained NEP, the reliability of which has been demonstrated by the prediction of the cleavage planes of AlN and diamond. It can be revealed that the annealing treatment can reduce the total potential energy by enhancing the binding of the C and N atoms at interfaces. The strain engineering of AlN also has an important impact on the mechanical properties of the interface. Furthermore, the influence of the surface roughness and interfacial nanostructures on the AlN/diamond heterostructures has been considered. It can be indicated that the combination of surface roughness reduction, AlN strain engineering, and annealing treatment can effectively result in superior and more stable interfacial mechanical properties, which can provide a promising solution to the optimization of mechanical properties, of ultrawide band gap semiconductor heterostructures.

Spatial organization of the ions at the free surface of imidazolium-based ionic liquids.

HYPOTHESIS: Experimental information on the molecular scale structure of ionic liquid interfaces is controversial, giving rise to two competing scenarios, namely the double layer-like and "chessboard"-like structures. This issue can be resolved by computer simulation methods, at least for the underlying molecular model. Systematically changing the anion type can elucidate the relative roles of electrostatic interactions, hydrophobic (or, strictly speaking, apolar) effects and steric restrictions on the interfacial properties. SIMULATIONS: Molecular dynamics simulation is combined with intrinsic analysis methods both at the molecular and atomic levels, supplemented by Voronoi analysis of self-association. FINDINGS: We see no evidence for the existence of a double-layer-type arrangement of the ions, or for their self-association at the surface of the liquid. Instead, our results show that cation chains associate into apolar domains that protrude into the vapour phase, while charged groups form domains that are embedded in this apolar environment at the surface. However, the apolar chains largely obscure the cation groups, to which they are bound, while the smaller and more mobile anions can more easily access the free surface, leading to a somewhat counterintuitive net excess of negative charge at the interface. Importantly, this excess charge could only be identified by applying intrinsic analysis.

Effect of Alloying Elements in Steels on the Interfacial Structure and Mechanical Properties of Mg to Steel by Laser-GTAW Hybrid Direct Lap Welding.

Mg alloy AZ31B was directly bonded to SK7 with a low alloy content, DP980 with a high Mn content, 316L with a high Cr and high Ni content by laser-gas tungsten arc welding (GTAW) and hybrid direct lap welding. The results showed that the tensile loads of AZ31B/SK7 and AZ31B/DP980 joints were 283 N/mm and 285 N/mm respectively, while the tensile load of AZ31B/316L joint was only 115 N/mm. The fracture and interface microstructures were observed using scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and identified through X-ray diffractometry (XRD). For AZ31B/SK7 and AZ31B/DP980, the interface of the front reaction area and the keyhole reaction area was mainly composed of an Fe-Al phase and an Al-Mn phase. However, for AZ31B/316L, the interface of the keyhole reaction area was mainly composed of an Fe-Al phase and an Al-Mn phase, but a multi-layer composite structure consisting of the Mg17Al12 compound layer and eutectic layer was formed in the front reaction area, which led to a deterioration in the joint property. The influencing mechanism of Mn, Cr and Ni elements in steel on the properties and interface structure of the laser-GTAW lap joint between the Mg alloy and the steel was systematically analyzed.

Nanoscale Insights into the Mechanical Behavior of Interfacial Composite Structures between Calcium Silicate Hydrate/Calcium Hydroxide and Silica.

The failure of the interfacial transition zone has been identified as the primary cause of damage and deterioration in cement-based materials. To further understand the interfacial failure mechanism, interfacial composite structures between the main hydration products of ordinary Portland cement (OPC), calcium silicate hydrate (CSH) and calcium hydroxide (Ca(OH)2), and silica (SiO2) were constructed while considering their anisotropy. Afterwards, uniaxial tensile tests were conducted using molecular dynamics (MD) simulations. Our results showed that the interfacial zones (IZs) of interfacial composite structures tended to have relatively lower densities than those of the bulk, and the anisotropy of the hydration products had almost no effect on the IZ being a low-density zone. Interfacial composite structures with different configurations exhibited diverse nanomechanical behaviors in terms of their ultimate strength, stress-strain relationship and fracture evaluation. A higher strain rate contributed to a higher ultimate strength and a more prolonged decline in the residual strength. In the interfacial composite structures, both CSH and Ca(OH)2 exhibited ruptures of the Ca-O bond as the primary atomic pair during the tensile process. The plastic damage characteristics of the interfacial composite structures during the tensile process were assessed by analyzing the normalized number of broken Ca-O bonds, which also aligned with the atomic chain break characteristics evident in the per-atom stress map.

Lyotropic Liquid Crystal (LLC)-Templated Nanofiltration Membranes by Precisely Administering LLC/Substrate Interfacial Structure.

Mesoporous materials based on lyotropic liquid crystal templates with precisely defined and flexible nanostructures offer an alluring solution to the age-old challenge of water scarcity. In contrast, polyamide (PA)-based thin-film composite (TFC) membranes have long been hailed as the state of the art in desalination. They grapple with a common trade-off between permeability and selectivity. However, the tides are turning as these novel materials, with pore sizes ranging from 0.2 to 5 nm, take center stage as highly coveted active layers in TFC membranes. With the ability to regulate water transport and influence the formation of the active layer, the middle porous substrate of TFC membranes becomes an essential player in unlocking their true potential. This review delves deep into the recent advancements in fabricating active layers using lyotropic liquid crystal templates on porous substrates. It meticulously analyzes the retention of the liquid crystal phase structure, explores the membrane fabrication processes, and evaluates the water filtration performance. Additionally, it presents an exhaustive comparison between the effects of substrates on both polyamide and lyotropic liquid crystal template top layer-based TFC membranes, covering crucial aspects such as surface pore structures, hydrophilicity, and heterogeneity. To push the boundaries even further, the review explores a diverse array of promising strategies for surface modification and interlayer introduction, all aimed at achieving an ideal substrate surface design. Moreover, it delves into the realm of cutting-edge techniques for detecting and unraveling the intricate interfacial structures between the lyotropic liquid crystal and the substrate. This review is a passport to unravel the enigmatic world of lyotropic liquid crystal-templated TFC membranes and their transformative role in global water challenges.