Partition coefficient screening - An effective approach for finding the best conditions for byproduct removal as demonstrated by a bispecific antibody purification case.

In recombinant protein purification, differences in isoelectric point (pI)/surface charge and hydrophobicity between the product and byproducts generally form the basis for separation. For bispecific antibodies (bsAbs), in many cases the physicochemical difference between product and byproducts is subtle, making byproduct removal considerably challenging. In a previous report, with a bsAb case study, we showed that partition coefficient (Kp) screening for the product and byproducts under various conditions facilitated finding conditions under which effective separation of two difficult-to-remove byproducts was achieved by anion exchange (AEX) chromatography. In the current work, as a follow-up study, we demonstrated that the same approach enabled identification of conditions allowing equally good byproduct removal by mixed-mode chromatography with remarkably improved yield. Results from the current and previous studies proved that separation factor determination based on Kp screening for product and byproduct is an effective approach for finding conditions enabling efficient and maximum byproduct removal, especially in challenging cases.

Effects of process intensification on homogeneity of an IgG1:κ monoclonal antibody during perfusion culture.

The pharmaceutical industry employs various strategies to improve cell productivity. These strategies include process intensification, culture media improvement, clonal selection, media supplementation and genetic engineering of cells. However, improved cell productivity has inherent risk of impacting product quality attributes (PQA). PQAs may affect the products' efficacy via stability, bioavailability, or in vivo bioactivity. Variations in manufacturing process may introduce heterogeneity in the products by altering the type and extent of N-glycosylation, which is a PQA of therapeutic proteins. We investigated the effect of different cell densities representing increasing process intensification in a perfusion cell culture on the production of an IgG1-κ monoclonal antibody from a CHO-K1 cell line. This antibody is glycosylated both on light chain and heavy chain. Our results showed that the contents of glycosylation of IgG1-κ mAb increased in G0F and fucosylated type glycans as a group, whereas sialylated type glycans decreased, for the mAb whole protein. Overall, significant differences were observed in amounts of G0F, G1F, G0, G2FS1, and G2FS2 type glycans across all process intensification levels. G2FS2 and G2 type N-glycans were predominantly quantifiable from light chain rather than heavy chain. It may be concluded that there is a potential impact to product quality attributes of therapeutic proteins during process intensification via perfusion cell culture that needs to be assessed. Since during perfusion cell culture the product is collected throughout the duration of the process, lot allocation needs careful attention to process parameters, as PQAs are affected by the critical process parameters (CPPs). KEY POINTS: • Molecular integrity may suffer with increasing process intensity. • Galactosylated and sialylated N-glycans may decrease. • Perfusion culture appears to maintain protein charge structure.

Reconstruction of TNF-α with specific isoelectric point released from SPIONs basing on variable charge to enhance pH-sensitive controlled-release.

The clinical application of tumor necrosis factor-α (TNF-α) is limited by its short half-life, subeffective concentration in the targeted area and severe systemic toxicity. In this study, the recombinant polypeptide S4-TNF-α was constructed and coupled with chitosan-modified superparamagnetic iron oxide nanoparticles (S4-TNF-α-SPIONs) to achieve pH-sensitive controlled release and active tumor targeting activity. The isoelectric point (pI) of S4-TNF-α was reconstructed to approach the pH of the tumor microenvironment. The negative-charge S4-TNF-α was adsorbed to chitosan-modified superparamagnetic iron oxide nanoparticles (CS-SPIONs) with a positive charge through electrostatic adsorption at physiological pH. The acidic tumor microenvironment endowed S4-TNF-α with a zero charge, which accelerated S4-TNF-α release from CS-SPIONs. Our studies showed that S4-TNF-α-SPIONs displayed an ideal pH-sensitive controlled release capacity and improved antitumor effects. Our study presents a novel approach to enhance the pH-sensitive controlled-release of genetically engineered drugs by adjusting their pI to match the pH of the tumor microenvironment.

Three-Dimensional Structural Stability and Local Electrostatic Potential at Point Mutations in Spike Protein of SARS-CoV-2 Coronavirus.

The contagiousness of SARS-CoV-2 ß-coronavirus is determined by the virus-receptor electrostatic association of its positively charged spike (S) protein with the negatively charged angiotensin converting enzyme-2 (ACE2 receptor) of the epithelial cells. If some mutations occur, the electrostatic potential on the surface of the receptor-binding domain (RBD) could be altered, and the S-ACE2 association could become stronger or weaker. The aim of the current research is to investigate whether point mutations can noticeably alter the electrostatic potential on the RBD and the 3D stability of the S1-subunit of the S-protein. For this purpose, 15 mutants with different hydrophilicity and electric charge (positive, negative, or uncharged) of the substituted and substituting amino acid residues, located on the RBD at the S1-ACE2 interface, are selected, and the 3D structure of the S1-subunit is reconstructed on the base of the crystallographic structure of the S-protein of the wild-type strain and the amino acid sequence of the unfolded polypeptide chain of the mutants. Then, the Gibbs free energy of folding, isoelectric point, and pH-dependent surface electrostatic potential of the S1-subunit are computed using programs for protein electrostatics. The results show alterations in the local electrostatic potential in the vicinity of the mutant amino acid residue, which can influence the S-ACE2 association. This approach allows prediction of the relative infectivity, transmissibility, and contagiousness (at equal social immune status) of new SARS-CoV-2 mutants by reconstruction of the 3D structure of the S1-subunit and calculation of the surface electrostatic potential.

Potential of Negative-Ion-Mode Proteomics: An MS1-Only Approach.

Current proteomics approaches rely almost exclusively on using the positive ionization mode, resulting in inefficient ionization of many acidic peptides. This study investigates protein identification efficiency in the negative ionization mode using the DirectMS1 method. DirectMS1 is an ultrafast data acquisition method based on accurate peptide mass measurements and predicted retention times. Our method achieves the highest rate of protein identification in the negative ion mode to date, identifying over 1000 proteins in a human cell line at a 1% false discovery rate. This is accomplished using a single-shot 10 min separation gradient, comparable to lengthy MS/MS-based analyses. Optimizing separation and experimental conditions was achieved by utilizing mobile buffers containing 2.5 mM imidazole and 3% isopropanol. The study emphasized the complementary nature of data obtained in positive and negative ion modes. Combining the results from all replicates in both polarities increased the number of identified proteins to 1774. Additionally, we analyzed the method's efficiency using different proteases for protein digestion. Among the four studied proteases (LysC, GluC, AspN, and trypsin), trypsin and LysC demonstrated the highest protein identification yield. This suggests that digestion procedures utilized in positive-mode proteomics can be effectively applied in the negative ion mode. Data are deposited to ProteomeXchange: PXD040583.

Fingerprinting trimeric SARS-CoV-2 RBD by capillary isoelectric focusing with whole-column imaging detection.

Because the spike (S) protein of the severe acute respiratory syndrome coronavirus (SARS-CoV) is the immunodominant antigen, the S protein and its receptor-binding domain (RBD) are both targets currently to be genetically engineered for designing the broad-spectrum vaccine. In theory, the expressed protein exists as a set of variants that are roughly the same but slightly different, which depends on the protein expression system. The variants can be phenotypically manifested as charge heterogeneity. Here, we attempted to depict the charge heterogeneity of the trimeric SARS-CoV-2 RBD by using capillary isoelectric focusing with whole-column imaging detection (cIEF-WCID). In its nature form, the electropherogram fingerprints of the trimeric RBD were presented under optimized experimental conditions. The peaks of matrix buffers can be fully distinguishable from peaks of trimeric RBD. The isoelectric point (pI) was determined to be within a range of 6.67-9.54 covering the theoretical pI of 9.02. The fingerprints of three batches of trimeric RBDs are completely the same, with the intra-batch and batch-to-batch relative standard deviations (RSDs) of both pI values and area percentage of each peak no more than 1.0%, indicating that the production process is stable and this method can be used to surveillance the batch-to-batch consistency. The fingerprint remained unchanged after incubating at 37 °C for 7 d and oxidizing by 0.015% H2O2. In addition, the fingerprint was destroyed when adjusting the pH value to higher than 10.0 but still stable when the pH was lower than 4.0. In summary, the cIEF-WCID fingerprint can be used for the identification, batch-to-batch consistency evaluation, and stability study of the trimeric SARS-CoV-2 RBD, as part of a quality control strategy during the potential vaccine production.

PepAnalyzer: predicting peptide properties using its sequence.

Peptides are short linear molecules consisting of amino acids that play an essential role in most biological processes. They can treat diseases by working as a vaccine or antimicrobial agent and serves as a cancer molecule to deliver the drug to the target site for the treatment of cancer. They have the potential to solve the drawbacks of current medications and can be industrially produced in large quantities at low cost. However, poor chemical and physical stability, short circulating plasma half-life, and solubility are some issues that need solutions before they can be used as therapeutics. PepAnalyzer tool is a user-friendly tool that predicts 15 different properties such as binding potential, half-life, transmembrane patterns, test tube stability, charge, isoelectric point, molecular weights, and molar extinction coefficients only using the sequence. The tool is designed using BioPython utility and has even results with standard tools, such as Expasy, EBI, Genecorner, and Geneinfinity. The tool assists students, researchers, and the pharmaceutical sector. The PepAnalyzer tool's online platform is accessible at the link: http://www.iksmbrlabdu.in/peptool .

Resin and loading condition screening for effective and robust byproducts removal by anion exchange chromatography: A case study.

In downstream processing of protein therapeutics, ion exchange (IEX) chromatography is a powerful tool for removing byproducts whose isoelectric point (pI) is appreciably different from that of the product. Although in theory for a given case cation exchange (CEX) and anion exchange (AEX) chromatography should be equally effective for separation, in reality they may show different effectiveness. In the current work, with a case study, we demonstrated that AEX is more effective than CEX chromatography at removing the associated byproducts. In addition, we screened AEX resins and loading conditions to achieve best separation. Finally, we demonstrated that effective separation was achieved with the selected resin/condition, and chromatography performance was comparable between runs conducted at low and high load densities, suggesting that the developed process was relatively robust. The procedure described in this work can be used as a general approach for selecting resin and loading condition that allow for effective and robust removal of byproduct that binds weaker than the product to the selected type of column.

Disorder and amino acid composition in proteins: their potential role in the adaptation of extracellular pilins to the acidic media, where Acidithiobacillus thiooxidans grows.

There are few biophysical studies or structural characterizations of the type IV pilin system of extremophile bacteria, such as the acidophilic Acidithiobacillus thiooxidans. We set out to analyze their pili-comprising proteins, pilins, because these extracellular proteins are in constant interaction with protons of the acidic medium in which At. thiooxidans grows. We used the web server Operon Mapper to analyze and identify the cluster codified by the minor pilin of At. thiooxidans. In addition, we carried an in-silico characterization of such pilins using the VL-XT algorithm of PONDR® server. Our results showed that structural disorder prevails more in pilins of At. thiooxidans than in non-acidophilic bacteria. Further computational characterization showed that the pilins of At. thiooxidans are significantly enriched in hydroxy (serine and threonine) and amide (glutamine and asparagine) residues, and significantly reduced in charged residues (aspartic acid, glutamic acid, arginine and lysine). Similar results were obtained when comparing pilins from other Acidithiobacillus and other acidophilic bacteria from another genus versus neutrophilic bacteria, suggesting that these properties are intrinsic to pilins from acidic environments, most likely by maintaining solubility and stability in harsh conditions. These results give guidelines for the application of extracellular proteins of acidophiles in protein engineering.

High Recovery Chromatographic Purification of mRNA at Room Temperature and Neutral pH.

Messenger RNA (mRNA) is becoming an increasingly important therapeutic modality due to its potential for fast development and platform production. New emerging RNA modalities, such as circular RNA, drive the need for the development of non-affinity purification approaches. Recently, the highly efficient chromatographic purification of mRNA was demonstrated with multimodal monolithic chromatography media (CIM® PrimaS), where efficient mRNA elution was achieved with an ascending pH gradient approach at pH 10.5. Here, we report that a newly developed chromatographic material enables the elution of mRNA at neutral pH and room temperature. This material demonstrates weak anion-exchanging properties and an isoelectric point of 5.3. It enables the baseline separation of mRNA (at least up to 10,000 nucleotides (nt) in size) from parental plasmid DNA (regardless of isoform composition) with both a NaCl gradient and ascending pH gradient approach, while mRNA elution is achieved in a pH range of 5-7. In addition, the basic structure of the novel material is a chromatographic monolith, enabling convection-assisted mass transfer of large RNA molecules to and from the active surface. This facilitates the elution of mRNA in 3-7 column volumes with more than 80% elution recovery and uncompromised integrity. This is demonstrated by the purification of a model mRNA (size 995 nt) from an in vitro transcription reaction mixture. The purified mRNA is stable for at least 34 days, stored in purified H2O at room temperature.

Decoding the Virtual 2D Map of the Chloroplast Proteomes.

BACKGROUND: The chloroplast is a semi-autonomous organelle having its own genome and corresponding proteome. Although chloroplast genomes have been reported, no reports exist on their corresponding proteomes. Therefore, a proteome-wide analysis of the chloroplast proteomes of 2893 species was conducted, and a virtual 2D map was constructed. RESULTS: The resulting virtual 2D map of the chloroplast proteome exhibited a bimodal distribution. The molecular mass of the chloroplast proteome ranged from 0.448 to 616.334 kDa, and the isoelectric point (pI) ranged from 2.854 to 12.954. Chloroplast proteomes were dominated by basic pI proteins with an average pI of 7.852. The molecular weight and isoelectric point of chloroplast proteome were found to show bimodal distribution. Leu was the most abundant and Cys the least abundant amino acid in the chloroplast proteome. Notably, Trp amino acid was absent in the chloroplast protein sequences of Pilostyles aethiopica. In addition, Selenocysteine (Sec) and Pyrrolysine (Pyl) amino acids were also found to be lacking in the chloroplast proteomes. CONCLUSION: The virtual 2D map and amino acid composition of chloroplast proteome will enable the researchers to understand the biochemistry of chloroplast protein in detail. Further, the amino acid composition of the chloroplast proteome will also allow us to understand the codon usage bias. The codon usage bias and amino acid usage bias of chloroplast will be crucial to understanding their relationship.

Antibodies with Weakly Basic Isoelectric Points Minimize Trade-offs between Formulation and Physiological Colloidal Properties.

The widespread interest in antibody therapeutics has led to much focus on identifying antibody candidates with favorable developability properties. In particular, there is broad interest in identifying antibody candidates with highly repulsive self-interactions in standard formulations (e.g., low ionic strength buffers at pH 5-6) for high solubility and low viscosity. Likewise, there is also broad interest in identifying antibody candidates with low levels of non-specific interactions in physiological solution conditions (PBS, pH 7.4) to promote favorable pharmacokinetic properties. To what extent antibodies that possess both highly repulsive self-interactions in standard formulations and weak non-specific interactions in physiological solution conditions can be systematically identified remains unclear and is a potential impediment to successful therapeutic drug development. Here, we evaluate these two properties for 42 IgG1 variants based on the variable fragments (Fvs) from four clinical-stage antibodies and complementarity-determining regions from 10 clinical-stage antibodies. Interestingly, we find that antibodies with the strongest repulsive self-interactions in a standard formulation (pH 6 and 10 mM histidine) display the strongest non-specific interactions in physiological solution conditions. Conversely, antibodies with the weakest non-specific interactions under physiological conditions display the least repulsive self-interactions in standard formulations. This behavior can be largely explained by the antibody isoelectric point, as highly basic antibodies that are highly positively charged under standard formulation conditions (pH 5-6) promote repulsive self-interactions that mediate high colloidal stability but also mediate strong non-specific interactions with negatively charged biomolecules at physiological pH and vice versa for antibodies with negatively charged Fv regions. Therefore, IgG1s with weakly basic isoelectric points between 8 and 8.5 and Fv isoelectric points between 7.5 and 9 typically display the best combinations of strong repulsive self-interactions and weak non-specific interactions. We expect that these findings will improve the identification and engineering of antibody candidates with drug-like biophysical properties.

Interaction among bovine serum albumin (BSA) molecules in the presence of anions: a small-angle neutron scattering study.

Protein-protein interaction in solution strongly depends on dissolved ions and solution pH. Interaction among globular protein (bovine serum albumin, BSA), above and below of its isoelectric point (pI ≈ 4.8), is studied in the presence of anions (Cl-, Br-, I-, F-, SO42-) using small-angle neutron scattering (SANS) technique. The SANS study reveals that the short-range attraction among BSA molecules remains nearly unchanged in the presence of anions, whereas the intermediate-range repulsive interaction increases following the Hofmeister series of anions. Although the interaction strength modifies below and above the pI of BSA, it nearly follows the series.

pH Dependence of Amyloid-ß Fibril Assembly Kinetics: Unravelling the Microscopic Molecular Processes.

Central to Alzheimer's disease (AD) is the assembly of the amyloid-beta peptide (Aß) into fibrils. A reduction in pH accompanying inflammation or subcellular compartments, may accelerate fibril formation as the pH approaches Aß's isoelectric point (pI). Using global fitting of fibril formation kinetics over a range of pHs, we identify the impact net charge has on individual fibril assembly microscopic rate constants. We show that the primary nucleation has a strong pH dependence. The titration behaviour exhibits a mid-point or pKa of 7.0, close to the pKa of Aß histidine imidazoles. Surprisingly, both the secondary nucleation and elongation rate constants are pH independent. This indicates the charge of Aß, in particular histidine protonation, has little impact on this stage of Aß assembly. These fundamental processes are key to understanding the forces that drive the assembly of Aß into toxic oligomers and fibrils.

In silico analysis of bacterial translation factors reveal distinct translation event specific pI values.

BACKGROUND: Protein synthesis is a cellular process that takes place through the successive translation events within the ribosome by the event-specific protein factors, namely, initiation, elongation, release, and recycling factors. In this regard, we asked the question about how similar are those translation factors to each other from a wide variety of bacteria? Hence, we did a thorough in silico study of the translation factors from 495 bacterial sp., and 4262 amino acid sequences by theoretically measuring their pI and MW values that are two determining factors for distinguishing individual proteins in 2D gel electrophoresis in experimental procedures. Then we analyzed the output from various angles. RESULTS: Our study revealed the fact that it's not all same, or all random, but there are distinct orders and the pI values of translation factors are translation event specific. We found that the translation initiation factors are mainly basic, whereas, elongation and release factors that interact with the inter-subunit space of the intact 70S ribosome during translation are strictly acidic across bacterial sp. These acidic elongation factors and release factors contain higher frequencies of glutamic acids. However, among all the translation factors, the translation initiation factor 2 (IF2) and ribosome recycling factor (RRF) showed variable pI values that are linked to the order of phylogeny. CONCLUSIONS: From the results of our study, we conclude that among all the bacterial translation factors, elongation and release factors are more conserved in terms of their pI values in comparison to initiation and recycling factors. Acidic properties of these factors are independent of habitat, nature, and phylogeny of the bacterial species. Furthermore, irrespective of the different shapes, sizes, and functions of the elongation and release factors, possession of the strictly acidic pI values of these translation factors all over the domain Bacteria indicates that the acidic nature of these factors is a necessary criterion, perhaps to interact into the partially enclosed rRNA rich inter-subunit space of the translating 70S ribosome.

Positive charge in the complementarity-determining regions of synthetic nanobody prevents aggregation.

In the past, specificity and affinity were the priority for synthetic antibody library. However, therapeutic antibodies need good stability for medical use. Through carefully adjust the chemical diversity in CDRs, one hopes to design a synthetic antibody library with good developability. Here we thoroughly analyzed 296 nanobody sequences and structures, constructed a fully-functional synthetic nanobody library, evaluated the relationship between aggregation and isoelectric point, and found that high-pI nanobodies were more resistant to aggregation than low-pIs. As we used the same framework for constructing the library, CDRs charge played a crucial role in mediating nanobody aggregation. We also analyzed the theoretical pI of 296 nanobodies from PDB, about 75% had basic pI, only 25% were acidic. Those results provided useful guidelines for designing next-generation synthetic nanobody libraries and for identifying potent and safe nanobody therapeutics.

Isoelectric point determination by imaged CIEF of commercially available SARS-CoV-2 proteins and the hACE2 receptor.

In order to contribute to the scientific research on the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), we have investigated the isoelectric points (pI) of several related proteins, which are commercially available: the receptor-binding domain (RBD) with His- and Fc-tag, the S1 subunit with His-tag, the S1/S2 subunits with His-tag and the human angiotensin-converting enzyme 2 (hACE2) with His-tag. First, the theoretical pI values, based on the amino acid (AA) sequences of the proteins, were calculated using the ProtParam tool from the Bioinformatics Resource Portal ExPASy. The proteins were then measured with the Maurice imaged CIEF system (native fluorescence detection), testing various measurement conditions, such as different ampholytes or ampholyte mixtures. Due to isoforms, we get sections with several peaks and not just one peak for each protein. The determined pI range for the RBD/Fc is 8.24-9.32 (theoretical pI: 8.55), for the RBD/His it is 7.36-9.88 (8.91) and for the S1/His it is 7.30-8.37 (7.80). The pI range of the S1/S2/His is 4.41-5.87 (no theoretical pI, AA sequence unknown) and for hACE2/His, the determined global range is 5.19-6.11 (5.60) for all experimental conditions chosen. All theoretically derived values were found within these ranges, usually close to the center. Therefore, we consider theoretical values as useful to make predictions about the isoelectric points of SARS-CoV-2 proteins. The experimental conditions had only a minor influence on the pI ranges obtained and mainly influenced the peak shapes.

Impact of the isoelectric point of model parvoviruses on viral retention in anion-exchange chromatography.

Anion-exchange chromatography (AEX) is used in the downstream purification of monoclonal antibodies to remove impurities and potential viral contamination based on electrostatic interactions. Although the isoelectric point (pI) of viruses is considered a key factor predicting the virus adsorption to the resin, the precise molecular mechanisms involved remain unclear. To address this question, we compared structurally homologous parvoviruses that only differ in their surface charge distribution. A single charged amino acid substitution on the capsid surface of minute virus of mice (MVM) provoked an increased apparent pI (pIapp ) 6.2 compared to wild-type MVM (pIapp = 4.5), as determined by chromatofocusing. Despite their radically different pIapp , both viruses displayed the same interaction profile in Mono Q AEX at different pH conditions. In contrast, the closely related canine parvovirus (pIapp = 5.3) displayed a significantly different interaction at pH 5. The detailed structural analysis of the intricate three-dimensional structure of the capsids suggests that the charge distribution is critical, and more relevant than the pI, in controlling the interaction of a virus with the chromatographic resin. This study contributes to a better understanding of the molecular mechanisms governing virus clearance by AEX, which is crucial to enable robust process design and maximize safety.

IgG-like bispecific antibody platforms with built-in purification-facilitating elements.

Assembly of IgG-like asymmetric bispecific antibodies (bsAbs) requires heavy chain heterodimerization and cognate heavy-light chain pairings. Multiple strategies have been developed to solve these chain association issues. While these strategies greatly promote correct chain pairing, they normally cannot prevent low amount of chain mispaired byproducts from being generated. Besides, byproducts can also be generated as a result of discordant chain expression. The existence of various byproducts poses considerable challenges to downstream processing during the production of recombinant IgG-like bsAbs. In many cases, yield is greatly compromised for purity improvement. This mini review introduces eight IgG-like bsAb platforms, which share a common feature: they all contain built-in purification-facilitating elements in addition to chain pairing control designs. These platforms, by simultaneously providing solutions to the two issues associated with bsAb production (i.e., correct chain pairing and efficient purification), improve both efficiency and robustness of bsAb production.

Extremophile enzyme optimization for low temperature and high salinity are fundamentally incompatible.

The evolutionary mechanisms behind cold and high-saline co-adaptation of proteins are not thoroughly understood. To explore how enzymes evolve in response to multiple environmental pressures we developed a novel in silico method to model the directed evolution of proteins, the Protein Evolution Parameter Calculator (PEPC). PEPC carries out single amino acid substitutions that lead to improvements in the selected user-defined parameters. To investigate the evolutionary relationship between increased flexibility and decreased isoelectric point, which are presumed indicators of cold and saline adaptation in proteins, we applied PEPC to a subset of core haloarchaea orthologous group (cHOG) proteins from the mesophilic Halobacterium salinarum NRC-1 and cold-tolerant Halorubrum lacusprofundi strain ATCC 49239. The results suggest that mutations that increase flexibility will also generally increase isoelectric point. These findings suggest that enzyme adaptation to low temperature and high salinity might be evolutionarily counterposed based on the structural characteristics of probable amino acid mutations. This may help to explain the apparent lack of truly psychrophilic halophiles in nature, and why microbes adapted to polar hypersaline environments typically have mesophilic temperature optima. A better understanding of protein evolution to extremely cold and salty conditions will aid in our understanding of where and how life is distributed on Earth and in our solar system.