Microbially induced calcium carbonate precipitation through CO2 sequestration via an engineered Bacillus subtilis.

BACKGROUND: Microbially induced calcium carbonate precipitation has been extensively researched for geoengineering applications as well as diverse uses within the built environment. Bacteria play a crucial role in producing calcium carbonate minerals, via enzymes including carbonic anhydrase-an enzyme with the capability to hydrolyse CO2, commonly employed in carbon capture systems. This study describes previously uncharacterised carbonic anhydrase enzyme sequences capable of sequestering CO2 and subsequentially generating CaCO3 biominerals and suggests a route to produce carbon negative cementitious materials for the construction industry. RESULTS: Here, Bacillus subtilis was engineered to recombinantly express previously uncharacterised carbonic anhydrase enzymes from Bacillus megaterium and used as a whole cell catalyst allowing this novel bacterium to sequester CO2 and convert it to calcium carbonate. A significant decrease in CO2 was observed from 3800 PPM to 820 PPM upon induction of carbonic anhydrase and minerals recovered from these experiments were identified as calcite and vaterite using X-ray diffraction. Further experiments mixed the use of this enzyme (as a cell free extract) with Sporosarcina pasteurii to increase mineral production whilst maintaining a comparable level of CO2 sequestration. CONCLUSION: Recombinantly produced carbonic anhydrase successfully sequestered CO2 and converted it into calcium carbonate minerals using an engineered microbial system. Through this approach, a process to manufacture cementitious materials with carbon sequestration ability could be developed.

Effect of (in)organic additives on microbially induced calcium carbonate precipitation.

AIM: This study aimed to understand the morphological effects of (in)organic additives on microbially induced calcium carbonate precipitation (MICP). METHODS AND RESULTS: MICP was monitored in real time in the presence of (in)organic additives: bovine serum albumin (BSA), biofilm surface layer protein A (BslA), magnesium chloride (MgCl2), and poly-l-lysine. This monitoring was carried out using confocal microscopy to observe the formation of CaCO3 from the point of nucleation, in comparison to conditions without additives. Complementary methodologies, namely scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction, were employed to assess the visual morphology, elemental composition, and crystalline structures of CaCO3, respectively, following the crystals' formation. The results demonstrated that in the presence of additives, more CaCO3 crystals were produced at 100 min compared to the reaction without additives. The inclusion of BslA resulted in larger crystals than reactions containing other additives, including MgCl2. BSA induced a significant number of crystals from the early stages of the reaction (20 min) but did not have a substantial impact on crystal size compared to conditions without additives. All additives led to a higher content of calcite compared to vaterite after a 24-h reaction, with the exception of MgCl2, which produced a substantial quantity of magnesium calcite. CONCLUSIONS: The work demonstrates the effect of several (in)organic additives on MICP and sets the stage for further research to understand additive effects on MICP to achieve controlled CaCO3 precipitation.

Microbial induced calcium precipitation by Zobellella denitrificans sp. LX16 to simultaneously remove ammonia nitrogen, calcium, and chemical oxygen demand in reverse osmosis concentrates.

In recent years, with the rapid development of industrial revolution and urbanization, the generation and treatment of a large number of salt-containing industrial wastewater has attracted wide attention. A novel salt-tolerant Zobellella denitrificans sp. LX16 with excellent nitrogen removal and biomineralization capabilities was isolated in this experiment. Kinetic experiments were conducted to determine the optimal condition. Under this condition, chemical oxygen demand (COD) can be entirely removed together with ammonia nitrogen, and the removal efficiency of calcium was 88.09%. Growth curves and nitrogen balance tests showed that strain LX16 not only had good HNAD and MICP capabilities, but also had high nitrite reductase and nitrate reductase activities during this process. Three-dimensional fluorescence results reflected that when external carbon sources were lacking or salinity was high, humic acid could effectively enhance the metabolic activity of heterotrophic nitrifying aerobic denitrifying microorganisms through extracellular electron transfer, and the substances produced in the metabolic process could promote biommineralization. Moreover, combined with SEM, SEM-EDS, XRD and FTIR analysis, it is concluded that the microbial surface can provide nucleation sites to form calcium salts, and with the increase of alkalinity to generate Ca5(PO4)3OH. The theoretical basis for the use of biological treatment in reverse osmosis wastewater have been proved by this experiment.

Magnesium polypeptide combined with microbially induced calcite precipitation for remediation of lead contamination in phosphate mining wasteland soil.

Soil Pb contamination is inevitable, as a result of phosphate mining. It is essential to explore more effective Pb remediation approaches in phosphate mining wasteland soil to ensure their viability for a gradual return of soil quality for cultivation. In this study, a Pb-resistant urease-producing bacterium, Serratia marcescens W1Z1, was screened for remediation using microbially induced carbonate precipitation (MICP). Magnesium polypeptide (MP) was prepared from soybean meal residue, and the combined remediation of Pb contamination with MP and MICP in phosphate mining wasteland soil was studied. Remediation of Pb using a combination of MP with MICP strain W1Z1 (WM treatment) was the most effective, with the least exchangeable Pb at 30.37% and the most carbonate-bound Pb at 40.82%, compared to the other treatments, with a pH increase of 8.38. According to the community analysis, MP moderated the damage to microbial abundance and diversity caused by MICP. Total nitrogen (TN) was positively correlated with Firmicutes, pH, and carbonate-bound Pb. Serratia inoculated with strain W1Z1 were positively correlated with bacteria belonging to the Firmicutes phylum and negatively correlated with bacteria belonging to Proteobacteria. The available phosphate (AP) in the phosphate mining wasteland soil could encapsulate the precipitated Pb by ion exchange with carbonate, making it more stable. Combined MP-MICP remediation of Pb contamination in phosphate mining wasteland soil was effective and improved the soil microenvironment.

Effect of biopolymer chitosan on manganese immobilization improvement by microbial­induced carbonate precipitation.

Microbially induced carbonate precipitation (MICP), as an eco-friendly and promising technology that can transform free metal ions into stable precipitation, has been extensively used in remediation of heavy metal contamination. However, its depressed efficiency of heavy metal elimination remains in question due to the inhibition effect of heavy metal toxicity on bacterial activity. In this work, an efficient, low-cost manganese (Mn) elimination strategy by coupling MICP with chitosan biopolymer as an additive with reduced treatment time was suggested, optimized, and implemented. The influences of chitosan at different concentrations (0.01, 0.05, 0.10, 0.15 and 0.30 %, w/v) on bacterial growth, enzyme activity, Mn removal efficiency and microstructure properties of the resulting precipitation were investigated. Results showed that Mn content was reduced by 94.5 % within 12 h with 0.15 % chitosan addition through adsorption and biomineralization as MnCO3 (at an initial Mn concentration of 3 mM), demonstrating a two-thirds decrease in remediation time compared to the chitosan-absent system, whereas maximum urease activity increased by ∼50 %. Microstructure analyses indicated that the mineralized precipitates were spherical-shaped MnCO3, and a smaller size and more uniform distribution of MnCO3 is obtained by the regulation of abundant amino and hydroxyl groups in chitosan. These results demonstrate that chitosan accelerates nucleation and tunes the growth of MnCO3 by providing nucleation sites for mineral formation and alleviating the toxicity of metal ions, which has the potential to upgrade MICP process in a sustainable and effective manner. This work provides a reference for further understanding of the biomineralization regulation mechanism, and gives a new perspective into the application of biopolymer-intensified strategies of MICP technology in heavy metal contamination.

Microbial induced carbonate precipitation for remediation of heavy metals, ions and radioactive elements: A comprehensive exploration of prospective applications in water and soil treatment.

Improper disposal practices have caused environmental disruptions, possessing by heavy metal ions and radioactive elements in water and soil, where the innovative and sustainable remediation strategies are significantly imperative in last few decades. Microbially induced carbonate precipitation (MICP) has emerged as a pioneering technology for remediating contaminated soil and water. Generally, MICP employs urease-producing microorganisms to decompose urea (NH2CONH2) into ammonium (NH4+and carbon dioxide (CO2), thereby increasing pH levels and inducing carbonate precipitation (CO32-), and effectively removing remove contaminants. Nonetheless, the intricate mechanism underlying heavy metal mineralization poses a significant challenge, constraining its application in contaminants engineering, particularly in the context of prolonged heavy metal leaching over time and its efficacy in adverse environmental conditions. This review provides a comprehensive idea of recent development of MICP and its application in environmental engineering, examining metabolic pathways, mineral precipitation mechanisms, and environmental factors as well as providing future perspectives for commercial utilization. The use of ureolytic bacteria in MICP demonstrates cost-efficiency, environmental compatibility, and successful pollutant abatement over tradition bioremediation techniques, and bio-synthesis of nanoparticles. limitations such as large-scale application, elevated Ca2+levels in groundwater, and gradual contaminant release need to be overcome. The possible future research directions for MICP technology, emphasizing its potential in conventional remediation, CO2 sequestration, bio-material synthesis, and its role in reducing environmental impact for long-term economic benefits.

Influence of biochar in the calcite precipitation of sandy soil using sporosarcina ureae.

The microbially induced calcium carbonate precipitation (MICP) technology is an emerging novel and sustainable technique for soil stabilization and remediation. MICP, a microorganism-mediated biomineralization process, has attracted interest for its potential to enhance soil characteristics. The inclusion of biochar, a carbon-rich substance formed by biomass pyrolysis, adds another degree of intricacy to this process. The study highlights the impact of the combination of biochar and MICP together, using a bacterium, Sporosarcina ureae, on soil improvement. This blend of MICP and biochar improved the soil in terms of its geotechnical properties and also enabled the sequestering of carbon safely. It was observed that addition of 4% biochar significantly increased the soil's shear strength parameters (c and φ) as well as its stiffness after 21 treatment cycles. This improvement was because the calcium carbonate precipitate, which acts as a crucial binding agent, increased significantly due to microbial action in the soil-biochar mixture compared to the pure soil sample. The excess carbonate precipitation on account of biochar addition was verified through SEM-EDAX analysis where the images showed noteworthy carbonate precipitation on the surface of particles and increment in the calcium mass at the same treatment cycles when compared with untreated sand. The collaboration between MICP and biochar effectively increased the carbon sequestration within the sand sample. It was observed that at 21 cycles of treatment, the carbon storage within the sand sample increased by almost 3 times at 4% biochar compared to sand without any biochar. The statistical analysis further affirmed that strength depends on both biochar and the number of treatment cycles, whereas carbon sequestration potential is primarily influenced by the biochar content alone. This strategy, as a sustainable and environmentally friendly approach, has the potential to reform soil improvement practices and contribute to both soil strength enhancement and climate change mitigation, supporting the maintenance of ecological balance.

Multiple effects of microbially induced calcium precipitation on bacteria under different molar volumes of organic pollutants.

Microbially induced calcium precipitation (MICP) has been extensively discussed as a water treatment method. However, the impact of MICP on the selective adsorption of different organic contaminants in industrial wastewater and the metabolism and growth of bacteria has not been elucidated in detail. In this study, by comparing the differences in the metabolism and removal of bacteria by phenol, bisphenol A (BPA), and tetracycline (TC), it was found that bioprecipitates had significant differences in the adsorption capacity of organic pollutants with different molar volumes. Concurrently, bacteria produced more extracellular polymeric substances (EPS) under the influence of organic pollutants, and the self-protection mechanism of bacteria would reduce the amount of gaseous nitrogen. However, the points on the surface of EPS promoted the process of MICP, and MICP encapsulated bacteria to form precipitates to regulate bacteria in water and further improve the removal of carbon and nitrogen in water through biomineralization. This experiment provides new insights into the selective adsorption of bioprecipitates and its multiple effects on bacteria.

Efficient remediation of cadmium and lead contaminated soil in coal mining areas by MICP application in hydrothermal carbon-based bacterial agents: Nucleation pathways and mineralization mechanisms.

The development of industrial mining has resulted in a large amount of Cd and Pb polluting the soil in mining areas, and leads to adverse health effects on the life of both plants and animals. Here, a soft template method was conducted to prepare hydrothermal carbon (HC) with regular morphology, which assisted with Bacillus pasteurii to induce calcite precipitation for decontamination of mining soil. Soil remediation experiments over 30 days of remediation with an HC microbial agent (HCMA) resulted in 89.4% and 87.8% decrease in the amount of leached Cd and Pb, respectively. The content of exchangeable Cd and Pb decreased by 76.1% and 81.0%, respectively. At the same time, soil fertility significantly improved. The electrostatic potential and surface charge distribution of extracellular polymeric substances (EPS) and sodium citrate (NaCit) were analyzed using DFT simulations, their nucleophilic and electrophilic regions were determined, and the nucleation mechanism was determined. The DFT results indicated that the oxygen-containing groups of EPS and NaCit had strong negative electrostatic potential and electronegativity, which could cause Cd2+, Pb2+, and Ca2+ to aggregate on their surfaces. They also combined with CO32- produced by urease during the decomposition of urea, resulting in Cd2+ and Pb2+ being encapsulated by calcium carbonate to form a coprecipitate. X-ray diffraction analyses revealed that the precipitate was mainly calcite calcium carbonate, which is more stable and less prone to secondary leaching of HMs. The gathered data prove the significant role of HCMA in remediation of mining soil contaminated with Cd and Pb.

Immobilization of Cd2+ in an aqueous environment using a two-step microbial-induced carbonate precipitation method.

Previous researches indicate that the potent toxicity of cadmium hinders the efficacy of the microbial-induced carbonate precipitation (MICP) process for bioremediation of Cd2+ in aqueous environment. Increasing urea and calcium resource doses, introducing synergists, and utilizing urease-producing consortia can improve bio-immobilization performance of MICP. However, such measures may incur cost increases and/or secondary contamination. This study first verifies the substantial biotoxicity of Cd2+ for urease activity and then analyzes the practical limitation of traditional MICP using Bacillus pasteurii for bioremediation of Cd2+ in an aqueous environment containing 1-40 mM Cd2+ by a series tube tests and numerical simulation. Subsequently, a two-step MICP method, which separates urea hydrolysis and heavy metal precipitation, is introduced in this study to eliminate the inhibitory effect of heavy metal on urease activity. The concentrations of ammonium, Cd2+, and pH were monitored over time. The results indicate that the urease expression in B. pasteurii can be significantly inhibited by Cd2+ particularly at the concentration ranging from 10 to 40 mM, leading to pretty low efficacy of traditional MICP for bioremediation of Cd2+ (Cd2+ removal rate as low as 21.55-38.47% when the initial Cd2+ concentration = 40 mM). In contrast, when the two-step MICP method is applied, the Cd2+ can be almost completely immobilized, even though the concentration ratio of urea to Cd2+ is as low as 1.5:1.0, which is close to the theory minimum concentration ratio for the complete precipitation of carbonate to cadmium ions(1.0:1.0). Therefore, the cost-effective, environmentally sustainable, and straightforward two-step MICP method holds great potential for application in the bioremediation of Cd2+-contaminated solutions in high concentration.

Alkalinity control in sludge propels the conversion of concrete slurry waste into micro- and nano-sized biogenic CaCO3.

The utilization of Bacillus sp. for the production of bio-CaCO3 in concrete crack repair and strength enhancement has attracted considerable attention. However, microbial-induced calcium carbonate precipitation (MICP) has yet to be explored as a precedent with activated sludge. Here calcium sourced from concrete slurry waste (CSW) and carbon from sludge microbial ß-oxidation under alkaline were used to generate micro/nano CaCO3. The results indicate that the main crystalline form of the generated precipitated particles is calcite, with a particle size ranging from 0.7 to 10 µm. Minimal heavy metals were found in the supernatant following settling. And at the optimum pH of 8.5-9, carbon capture reached 743 mg L-1, and CaCO3 production reached 1,191 mg L-1, and dominant phylum were Proteobacteria and Bacteroidota, with Thauera being a prevalent genus adept in ß-oxidation. Mass balance analysis showed that alkali promotes microbial ß-oxidation of organisms to produce CO2 and facilitate storage. Thus, the alkaline regulation of metabolism between microbe and CSW provides a novel way of sludge to initiate MICP.

Synergistic biocementation: harnessing Comamonas and Bacillus ureolytic bacteria for enhanced sand stabilization.

Biocementation, driven by ureolytic bacteria and their biochemical activities, has evolved as a powerful technology for soil stabilization, crack repair, and bioremediation. Ureolytic bacteria play a crucial role in calcium carbonate precipitation through their enzymatic activity, hydrolyzing urea to produce carbonate ions and elevate pH, thus creating favorable conditions for the precipitation of calcium carbonate. While extensive research has explored the ability of ureolytic bacteria isolated from natural environments or culture conditions, bacterial synergy is often unexplored or under-reported. In this study, we isolated bacterial strains from the local eutrophic river canal and evaluated their suitability for precipitating calcium carbonate polymorphs. We identified two distinct bacterial isolates with superior urea degradation ability (conductivity method) using partial 16 S rRNA gene sequencing. Molecular identification revealed that they belong to the Comamonas and Bacillus genera. Urea degradation analysis was performed under diverse pH (6,7 and 8) and temperature (15 °C,20 °C,25 °C and 30 °C) ranges, indicating that their ideal pH is 7 and temperature is 30 °C since 95% of the urea was degraded within 96 h. In addition, we investigated these strains individually and in combination, assessing their microbially induced carbonate precipitation (MICP) in silicate fine sand under low (14 ± 0.6 °C) and ideal temperature 30 °C conditions, aiming to optimize bio-mediated soil enhancement. Results indicated that 30 °C was the ideal temperature, and combining bacteria resulted in significant (p ≤ 0.001) superior carbonate precipitation (14-16%) and permeability (> 10- 6 m/s) in comparison to the average range of individual strains. These findings provide valuable insights into the potential of combining ureolytic bacteria for future MICP research on field applications including soil erosion mitigation, soil stabilization, ground improvement, and heavy metal remediation.

The effect of extracellular polymeric substances on MICP solidifying rare earth slags and stabilizing Th and U.

Microbially induced carbonate precipitation (MICP) has been used to cure rare earth slags (RES) containing radionuclides (e.g. Th and U) and heavy metals with favorable results. However, the role of microbial extracellular polymeric substances (EPS) in MICP curing RES remains unclear. In this study, the EPS of Lysinibacillus sphaericus K-1 was extracted for the experiments of adsorption, inducing calcium carbonate (CaCO3) precipitation and curing of RES. The role of EPS in in MICP curing RES and stabilizing radionuclides and heavy metals was analyzed by evaluating the concentration and morphological distribution of radionuclides and heavy metals, and the compressive strength of the cured body. The results indicate that the adsorption efficiencies of EPS for Th (IV), U (VI), Cu2+, Pb2+, Zn2+, and Cd2+ were 44.83%, 45.83%, 53.7%, 61.3%, 42.1%, and 77.85%, respectively. The addition of EPS solution resulted in the formation of nanoscale spherical particles on the microorganism surface, which could act as an accumulating skeleton to facilitate the formation of CaCO3. After adding 20 mL of EPS solution during the curing process (Treat group), the maximum unconfined compressive strength (UCS) of the cured body reached 1.922 MPa, which was 12.13% higher than the CK group. The contents of exchangeable Th (IV) and U (VI) in the cured bodies of the Treat group decreased by 3.35% and 4.93%, respectively, compared with the CK group. Therefore, EPS enhances the effect of MICP curing RES and reduces the potential environmental problems that may be caused by radionuclides and heavy metals during the long-term sequestration of RES.

Microbially Induced Calcium Carbonate Precipitation by Sporosarcina pasteurii: a Case Study in Optimizing Biological CaCO3 Precipitation.

Current production of traditional concrete requires enormous energy investment that accounts for approximately 5 to 8% of the world's annual CO2 production. Biocement is a building material that is already in industrial use and has the potential to rival traditional concrete as a more convenient and more environmentally friendly alternative. Biocement relies on biological structures (enzymes, cells, and/or cellular superstructures) to mineralize and bind particles in aggregate materials (e.g., sand and soil particles). Sporosarcina pasteurii is a workhorse organism for biocementation, but most research to date has focused on S. pasteurii as a building material rather than a biological system. In this review, we synthesize available materials science, microbiology, biochemistry, and cell biology evidence regarding biological CaCO3 precipitation and the role of microbes in microbially induced calcium carbonate precipitation (MICP) with a focus on S. pasteurii. Based on the available information, we provide a model that describes the molecular and cellular processes involved in converting feedstock material (urea and Ca2+) into cement. The model provides a foundational framework that we use to highlight particular targets for researchers as they proceed into optimizing the biology of MICP for biocement production.

Insights in MICP dynamics in urease-positive Staphylococcus sp. H6 and Sporosarcina pasteurii bacterium.

Microbially induced calcite precipitation (MICP) is an efficient and eco-friendly technique that has attracted significant interest for resolving various problems in the soil (erosion, improving structural integrity and water retention, etc.), remediation of heavy metals, production of self-healing concrete or restoration of different concrete structures. The success of most common MICP methods depends on microorganisms degrading urea which leads to the formation of CaCO3 crystals. While Sporosarcina pasteurii is a well-known microorganism for MICP, other soil abundant microorganisms, such as Staphylococcus bacteria have not been thoroughly studied for its efficiency in bioconsolidation though MICP is a very important proccess which can ensure soil quality and health. This study aimed to analyze MICP process at the surface level in Sporosarcina pasteurii and a newly screened Staphylococcus sp. H6 bacterium as well as show the possibility of this new microorganism to perform MICP. It was observed that Staphylococcus sp. H6 culture precipitated 157.35 ± 3.3 mM of Ca2+ ions from 200 mM, compared to 176 ± 4.8 mM precipitated by S. pasteurii. The bioconsolidation of sand particles was confirmed by Raman spectroscopy and XRD analysis, which indicated the formation of CaCO3 crystals for both Staphylococcus sp. H6 and S. pasteurii cells. The water-flow test suggested a significant reduction in water permeability in bioconsolidated sand samples for both Staphylococcus sp. H6 and S. pasteurii. Notably, this study provides the first evidence that CaCO3 precipitation occurs on the surface of Staphylococcus and S. pasteurii cells within the initial 15-30 min after exposure to the biocementation solution. Furthermore, Atomic force microscopy (AFM) indicated rapid changes in cell roughness, with bacterial cells becoming completely coated with CaCO3 crystals after 90 min incubation with a biocementation solution. To our knowledge, this is the first time where atomic force microscopy was used to visualize the dynamic of MICP on cell surface.

Effect of surfactant on urease-producing flora from waste activated sludge using microbially induced calcite precipitation technology to suppress coal dust.

The wettability of microbially induced calcite precipitation (MICP) is a challenge in dust suppression. Herein, the tolerance of urease-producing flora to surfactants was investigated. The optimal tolerance concentrations of the urease-producing flora to sodium dodecylbenzene sulfonate (SDBS, anionic surfactant), alkyl polyglycoside (APG, non-ionic surfactant), and cocamidopropyl betaine (CAB, zwitterionic surfactant), and were 0.2%, 0.1%, and 0.05%. The cetyltrimethylammonium bromide (CTAB, cationic surfactant) inhibited urease production by urease-producing flora. The mineralization products of SDBS, APG, and CAB treatments were all transformed into calcite. The wind resistance test showed that the mass loss of all samples is less than 0.1%. The rain resistance and hardness tests showed that 0.2% SBDS had the best effect, followed by 0.1% APG and 0.05% CAB, and finally, No surfactants. Microbiome analysis showed that the abundance of Sporosarcina and Unclassified_bacillaceae reduced, and the intense competition between Paenalcaligenes and Sporosarcina are essential reasons for reducing urease activity. SDBS and APG could reduce the pathogenic risk of microbial dust suppressants. This study will facilitate the practical application of microbial dust suppressants.

Application of urease-producing microbial community in seawater to dust suppression in desert.

In order to solve the dust problem caused by sandstorms, this paper aims to propose a new method of enriching urease-producing microbial communities in seawater in a non-sterile environment. Besides, the difference of dust suppression performance of enriched microorganisms under different pH conditions was also explored to adapt the dust. The Fourier-transform infrared spectrometry (FTIR) and Scanning electron microscopy (SEM) confirmed the formation of CaCO3. The X-ray diffraction (XRD) further showed that the crystal forms of CaCO3 were calcite and vaterite. When urease activity was equivalent, the alkaline environment was conducive to the transformation of CaCO3 to more stable calcite. The mineralization rate at pH = 10 reached the maximum value on the 7th day, which was 97.49 ± 1.73%. Moreover, microbial community analysis results showed that the relative abundance of microbial community structure was different under different pH enrichment. Besides, the relative abundance of Sporosarcina, a representative genus of urease-producing microbial community, increased with the increase of pH under culture conditions, which consistent with the mineralization performance results. In addition, the genus level species network diagram also showed that in the microbial community, Sporosarcina was negatively correlated with another urease-producing genus Bacillus, and had a reciprocal relationship with Atopostipes, which means that the urease-producing microbial community was structurally stable. The enrichment of urease-producing microbial communities in seawater will provide empirical support for the large-scale engineering application of MICP technology in preventing and controlling sandstorms in deserts.

Sodium citrate increases the aggregation capacity of calcium ions during microbial mineralization to accelerate the formation of calcium carbonate.

The microbially induced carbonate precipitation (MICP) technique is widely used in soil heavy metal pollution control. Microbial mineralization involves extended mineralization times and slow crystallization rates. Thus, it is important to discover a method to accelerate mineralization. In this study, we selected six nucleating agents to screen and investigated the mineralization mechanism using polarized light microscopy, scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy. The results showed that sodium citrate removed 90.1% Pb better than traditional MICP and generated the highest amount of precipitation. Interestingly, due to the addition of sodium citrate (NaCit), the rate of crystallization increased and vaterite was stabilized. Moreover, we constructed a possible model to explain that NaCit increases the aggregation capacity of calcium ions during microbial mineralization to accelerate the formation of calcium carbonate (CaCO3). Thus, sodium citrate can increase the rate of MICP bioremediation, which is important for improving MICP efficiency.

Microbially induced calcium precipitation driven by denitrification: Performance, metabolites, and molecular mechanisms.

Microbially induced calcium precipitation (MICP) driven by denitrification has attracted extensive attention due to its application potential in nitrate removal from calcium-rich groundwater. However, little research has been conducted on this technique at the molecular level. Here, Pseudomonas WZ39 was used to explore the molecular mechanisms of nitrate-dependent MICP and the effects of Ca2+ on bacterial transcriptional regulation and metabolic response. The results exhibited that appropriate Ca2+ concentration (4.5 mM) can promote denitrification and the production of ATP, EPSs, and SMPs. Genome-wide analysis showed that the nitrate-dependent MICP was accomplished through heterotrophic denitrification and CO2 capture. During this process, EPS biosynthesis and Ca2+ signaling regulation were involved in the nucleation template supply and Ca2+ homeostasis balance. Untargeted transcriptome- and metabolome-association analyses revealed that the addition of Ca2+ triggered the significant up-regulation in several key pathways, such as transmembrane transporter and channel activities, amino acid metabolism, fatty acid biosynthesis, and carbon metabolism, which played a momentous role in the mineral nucleation and energy provision. The detailed information provided novel insights for understanding the active control of bacteria on MICP, and has great significance for deepening the cognition of groundwater remediation using nitrate-dependent MICP technique.

Study on MICP dust suppression technology in open pit coal mine: Preparation and mechanism of microbial dust suppression material.

With the recent increases in energy demands, the dust hazards of coal mining caused by transportation, loading and unloading and other processes are becoming increasingly serious. To control dust in open pit coal mines more environmentally friendly and efficiently, and to promote the use and development of non-in situ high-yield urease microorganisms for dust suppression in coal mines, Bacillus pasteurii was selected for dust suppression experiments in this article. Additionally, the growth of microorganisms in the coal dust microenvironment was simulated, and the effect of microbial mineralization products on the calorific value of upper coal dust was further studied. Our findings indicated that Bacillus pasteurii induced dust suppression by forming a calcite precipitate with non-uniform particle size to coal dust cementation. Moreover, after a single spray, the wind erosion resistance efficiency was 84% when the wind speed was set at 10 m/s. The growth of microorganisms and urease activity in the coal dust leachate were largely equal to those in the control group, reaching a peak at approximately 24 h, that the maximum growth quantity of OD600 was about 1.5, and the maximum urease activity was 11 mmol·L-1·min-1. The difference between the peak heat release rate of mixed coal dust and pure coal was only 4.82 kW/m2, which would not affect the value of coal products. Non in-situ Bacillus pasteurii can be growth metabolized normally in the microenvironment of coal dust. Finally, the mechanism of coal dust suppression by mineralization of microbial bacterial solution to form calcium carbonate was described by a reaction equation, which is important for further application and development of microbial dust suppressants.