Effect of magnesium oxide nanoparticles and LED irradiation on the viability and differentiation of human stem cells of the apical papilla.

PURPOSE: Currently, regenerative endodontic treatments are gaining more and more attention, and stem cells play a significant role in these treatments. In order to enhance stem cell proliferation and differentiation, a variety of methods and materials have been used. The purpose of this study was to determine the effects of magnesium oxide nanoparticles and LED irradiation on the survival and differentiation of human stem cells from apical papilla. METHODS: The MTT test was used to measure the cell survival of SCAPs that had been exposed to different concentrations of magnesium oxide nanoparticles after 24 and 48 h, and the concentration with the highest cell survival rate was picked for further studies. The cells were classified into four distinct groups based on their treatment: (1) control, which received no exposure, (2) exposure to magnesium oxide nanoparticles, (3) exposure to light emitting diode (LED) irradiation (635 nm, 200 mW/cm2) for 30 s, (4) exposure simultaneously with magnesium oxide nanoparticles and LED irradiation. A green approach was employed to synthesize magnesium oxide nanoparticles. Quantitative real time PCR was used to measure the gene expression of osteo/odontogenic markers such as BSP, DSPP, ALP and DMP1 in all four groups after treatment, and Alizarin red S staining (ARS) was used to determine the osteogenic differentiation of SCAPs by demonstrating the Matrix mineralization. RESULTS: The highest viability of SCAPs was observed after 24 h in concentration 1 and 10 µg/mL and after 48 h in concentration 1 µg/mL, which were not significantly different from the control group. In both times, the survival of SCAPs decreased with increasing concentration of magnesium oxide nanoparticles (MgONPs). According to the results of Real-time PCR, after 24 and 48 h, the highest differentiation of BSP, DMP1, ALP and DSPP genes was observed in the LED + MgONPs group, followed by MgONPs and then LED, and in all 3 experimental groups, it was significantly higher than control group (P < 0.05). Also, after 24 and 48 h, the density of ARS increased in all groups compared to the control group, and the highest density was observed in the MgONPs + LED and MgONPs groups. CONCLUSION: This research concluded that exposure to SCAPs, MgONPs, and LED irradiation has a significant effect on enhancing gene expression of odontogenic/osteogenic markers and increasing matrix mineralization.

Plant-Assisted Green Synthesis of MgO Nanoparticles as a Sustainable Material for Bone Regeneration: Spectroscopic Properties.

This work is devoted to magnesium oxide (MgO) nanoparticles (NPs) for their use as additives for bone implants. Extracts from four different widely used plants, including Aloe vera, Echeveria elegans, Sansevieria trifasciata, and Sedum morganianum, were evaluated for their ability to facilitate the "green synthesis" of MgO nanoparticles. The thermal stability and decomposition behavior of the MgONPs were analyzed by thermogravimetric analysis (TGA). Structure characterization was performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), and Raman scattering spectroscopy (RS). Morphology was studied by scanning electron microscopy (SEM). The photocatalytic activity of MgO nanoparticles was investigated based on the degradation of methyl orange (MeO) using UV-Vis spectroscopy. Surface-enhanced Raman scattering spectroscopy (SERS) was used to monitor the adsorption of L-phenylalanine (L-Phe) on the surface of MgONPs. The calculated enhancement factor (EF) is up to 102 orders of magnitude for MgO. This is the first work showing the SERS spectra of a chemical compound immobilized on the surface of MgO nanoparticles.

Inorganic Nanoparticles and Composite Films for Antimicrobial Therapies.

The development of drug-resistant microorganisms has become a critical issue for modern medicine and drug discovery and development with severe socio-economic and ecological implications. Since standard and conventional treatment options are generally inefficient, leading to infection persistence and spreading, novel strategies are fundamentally necessary in order to avoid serious global health problems. In this regard, both metal and metal oxide nanoparticles (NPs) demonstrated increased effectiveness as nanobiocides due to intrinsic antimicrobial properties and as nanocarriers for antimicrobial drugs. Among them, gold, silver, copper, zinc oxide, titanium oxide, magnesium oxide, and iron oxide NPs are the most preferred, owing to their proven antimicrobial mechanisms and bio/cytocompatibility. Furthermore, inorganic NPs can be incorporated or attached to organic/inorganic films, thus broadening their application within implant or catheter coatings and wound dressings. In this context, this paper aims to provide an up-to-date overview of the most recent studies investigating inorganic NPs and their integration into composite films designed for antimicrobial therapies.

Dual Valorization of Olive Mill Wastewater by Bio-Nanosynthesis of Magnesium Oxide and Yarrowia lipolytica Biomass Production.

This research investigates an efficient dual valorization of olive mill wastewater in the biosynthesis of magnesium oxide nanoparticles and in the depollution of the effluent by Yarrowia lipolytica growth evaluation. After removal of polyphenols, the recovered biophenols were reacted with the magnesium precursor to provide magnesium oxide nanoparticles. In order to confirm the biosynthesized magnesium oxide nanoparticles, several analyses were undertaken. The Fourier transform infrared spectrum gives a broad absorption at 658 cm-1 confirming the presence of the magnesium oxide nanoparticles, while the UV/VIS absorption spectroscopy reveals an intense transition with a maximum absorption at 300 nm. The X-ray diffraction and transmission electron microscopy analyses show that nanoparticles are in pure cubic crystalline with spherical and hexagonal shapes (average size is 19.4 nm). The zeta potential analysis illustrates a negative potential proving a good stability of the biosynthesized nanoparticles. Nanoparticles were assigned for their in vitro antibacterial activity against Escherichia coli, Enterobacter aerogenes, Salmonella typhimurium, Staphylococcus cohnii, and Bacillus niacini. The evaluation of the growth of Yarrowia lipolytica on the recovered olive mill wastewater after removal of polyphenols yielded 3.2 g/L of the Yarrowia biomass in 72 h without nutriment additions, providing an important decrease of chemical oxygen demand (73 %).

In vitro antibiofilm and anti-adhesion effects of magnesium oxide nanoparticles against antibiotic resistant bacteria.

The aim of the current investigation was to determine the antibacterial and antibiofilm potential of MgO nanoparticles (NPs) against antibiotic-resistant clinical strains of bacteria. MgO NPs were synthesized by a wet chemical method and further characterized by scanning electron microscopy and energy dispersive X-ray. Antibacterial activity was determined by broth microdilution and agar diffusion methods. The Bradford method was used to assess cellular protein leakage as a result of loss of membrane integrity. Microtiter plate assay following crystal violet staining was employed to determine the effect of MgO NPs on biofilm formation and removal of established biofilms. MIC values ranged between 125 and 500 µg/mL. Moreover, treatment with MgO NPs accelerated rate of membrane disruption, measured as a function of leakage of cellular proteins. Leakage of cellular protein content was greater among gram-negative bacteria. Cell adherence assay indicated 25.3-49.8% inhibition of bacterial attachment to plastic surfaces. According to a static biofilm method, MgO NPs reduced biofilm formation potential from 31% to 82.9% in a time-dependent manner. Moreover, NPs also significantly reduced the biomass of 48, 72, 96 and 120 hr old biofilms (P < 0.05). Cytotoxicity experiments using a neutral red assay revealed that MgO NPs are non-toxic to HeLa cells at concentrations of 15-120 µg/mL. These data provide in vitro scientific evidence that MgO NPs are effective and safe antibiofilm agents that inhibit adhesion, biofilm formation and removal of established biofilms of multidrug-resistant bacteria.

Allium cepa root tip assay in assessment of toxicity of magnesium oxide nanoparticles and microparticles.

Allium cepa bioassay had been used from decades for the assessment of toxicants and their harmful effects on environment as well as human health. Magnesium oxide (MgO) particles are being utilized in different fields. However, reports on the adverse effects of MgO nanoparticles on the environment and mankind are scarce. Hence, the toxicity of MgO particles is of concern because of their increased utilization. In the current study, A. cepa was used as an indicator to assess the toxicological efficiency of MgO nano- and microparticles (NPs and MPs) at a range of exposure concentrations (12.5, 25, 50, and 100µg/mL). The toxicity was evaluated by using various bioassays on A. cepa root tip cells such as comet assay, oxidative stress and their uptake/internalization profile. Results indicated a dose dependent increase in chromosomal aberrations and decrease in mitotic index (MI) when compared to control cells and the effect was more significant for NPs than MPs (at p<0.05). Comet analysis revealed that the Deoxyribonucleic acid (DNA) damage in terms of percent tail DNA ranged from 6.8-30.1 over 12.5-100µg/mL concentrations of MgO NPs and was found to be significant at the exposed concentrations. A significant increase in generation of hydrogen peroxide and superoxide radicals was observed in accordance with the lipid peroxidation profile in both MgO NPs and MPs treated plants when compared with control. In conclusion, this investigation revealed that MgO NPs exposure exhibited greater toxicity on A. cepa than MPs.

Acute oral toxicity study of magnesium oxide nanoparticles and microparticles in female albino Wistar rats.

Advancements in nanotechnology have led to the development of the nanomedicine, which involves nanodevices for diagnostic and therapeutic purposes. A key requirement for the successful use of the nanoparticles (NPs) in biomedical applications is their good dispensability, colloidal stability in biological media, internalization efficiency, and low toxicity. Therefore, toxicological profiling is necessary to understand the mechanism of NPs and microparticles (MPs). MgO NPs have attracted wide scientific interest due to ease of synthesis, chemical stability and unique properties. However, their toxic effects on humans should also be of concern with the increased applications of nano MgO. The present study was aimed to assess the toxicological potential of MgO NPs in comparison to their micron counterparts in female Wistar rats. Toxicity was evaluated using genotoxicity, histological, biochemical, antioxidant and biodistribution parameters post administration of MgO particles to rats through oral route. The results obtained from the investigation revealed that the acute exposure to the high doses of MgO NPs produced significant (p < 0.01) DNA damage and biochemical alterations. Antioxidant assays revealed prominent oxidative stress at the high dose level for both the particles. Toxicokinetic analysis showed significant levels of Mg accumulation in the liver and kidney tissues apart from urine and feces. Further, mechanistic investigational reports are warranted to document safe exposure levels and health implications post exposure to high levels of NPs.

Magnesium oxide nanoparticles and their ecotoxicological effect on edaphic organisms in tropical soil.

The demand for food has intensified production in agricultural areas and stimulated the use of nanotechnology to develop new inputs, especially nanoparticle materials. In this new context, predicting the impact of using nanoparticles on non-target organisms becomes a necessary measure. The aim of this study was to evaluate the ecotoxicological potential of magnesium (Mg2+ ) added via magnesium oxide nanoparticles (MgO-NPs), magnesium oxide (MgO), and magnesium nitrate hexahydrate (Mg [NO3 ]2 ·6H2 O) incubated over time in tropical soil on earthworms (Eisenia andrei), springtails (Folsomia candida), and enchytraeids (Enchytraeus crypticus). Tests were conducted using a clay-textured Latossolo Vermelho distrófico (Oxisol), which received increasing doses of Mg2+ (0; 25; 50; 100; 200 and 400 mg kg−1 of soil) from the three sources tested added to the soil. Treated soil was incubated for 120 days in a room with controlled temperature and photoperiod, and the ecotoxicological tests were performed at 0, 60, and 120 days of incubation. Despite having caused reduction in the reproduction of F. candida at the incubation time 0, MgO-NPs showed a low toxic potential against the other species studied, with toxicity only at a higher dose of 50 mg Mg kg−1 when compared to the other sources of Mg2+ applied to the soil (MgO and Mg [NO3 ]2 ·6H2 O). Responses associated with incubation times showed that all magnesium sources tested have lower toxicity over incubation time.

In Vitro Toxicological Assessment of Magnesium Oxide Nanoparticle Exposure in Several Mammalian Cell Types.

Worldwide researchers have rising concerns about magnesium-based materials, especially magnesium oxide (MgO) nanaoparticles, due to increasing usage as promising structural materials in various fields including cancer treatment. However, there is a serious lack of information about their toxicity at the cellular and molecular levels. In this study, the toxic potentials of MgO nanoparticles were investigated on liver (HepG2), kidney (NRK-52E), intestine (Caco-2), and lung (A549) cell lines. For the toxicological assessment, the following assays were used: the particle characterization by transmission electron microscopy, the determination of cellular uptake by inductively coupled plasma-mass spectrometry, MTT and neutral red uptake assays for cytotoxicity, comet assay for genotoxicity, and the determination of malondialdehyde (MDA), 8-hydroxydeoxyguanosine, protein carbonyl, and glutathione levels by enzyme-linked immune sorbent assays for the potential of oxidative damage and annexin V-fluorescein isothiocyanate (FITC) apoptosis detection assay with propidium iodide (PI) for apoptosis. Magnesium oxide nanoparticles were taken up by the cells depending on their concentration and agglomeration/aggregation potentials. Magnesium oxide nanoparticles induced DNA (≤14.27 fold) and oxidative damage. At a concentration of ≥323.39 µg/mL, MgO nanoparticles caused 50% inhibition in cell viability by 2 different cytotoxicity assays. The cell sensitivity to cytotoxic and genotoxic damage induced by MgO nanoparticles was ranked as HepG2 < A549 < Caco-2 < NRK-52E. Although it was observed that MgO nanoparticles induced apoptotic effects on the cells, apoptosis was not the main cell death. DNA damage, cell death, and oxidative damage effects of MgO nanoparticles should raise concern about the safety associated with their applications in consumer products.

Magnesium nanoparticles extirpate salt stress in carrots (Daucus carota L.) through metabolomics regulations.

Underground vegetables are sensitive and vulnerable to salt stress. The vegetables are the main source of vitamins, nutrients and minerals in human diet. Also contain healthy carbohydrates, antioxidant and resistant starch which are beneficial for human health. Salinity influences water balance, morphological appearance and cellular interference of crop plants. It also caused disproportion of nutrients which usually affects the physiochemical processes in plant. Salt stress also affect biochemical attributes and hampers the growth of underground organs, due to which yield of crop decreased. The nanoparticles had been potentially used for better crop yield, in the recent. In our research study, we elaborate the positive response of magnesium oxide nanoparticles (MgO-NPs) on the morphological and biochemical parameters as well as anti-oxidant enzymes action on two accessions of carrot (Daucus carota L.) under salt stress of 40 mM and 80 mM. In a pilot experiment, various levels (0, 50, 100, 150, 200 and 250 mg/L) of MgO-NPs were tested through foliar application on carrot plants. Foliar application of MgO-NPs at concentration of 150 mg/L was most effective treatment and ameliorate the salt stress in both carrot accessions (DC-03 and DC-90). The MgO-NPs significantly enhanced the morphological and biochemical parameters. The yield was significantly increased with the exposure of MgO-NPs. Our results thus confirmed the potential of MgO-NPs to endorse the plant development and growth under salinity. However, further research study is needed to explore effectiveness of MgO-NPs in various other plants for the ameliorant of salinity.

Controlled delivery of procyanidin through magnesium oxide nanoparticles (MgO NPs) to improve the activity and mineralization of osteoblasts under oxidative stressin vitro.

Excessive reactive oxygen species (ROS) in the microenvironment of osteoporosis (OP) not only accelerate the bone absorption, but also affect the osteogenic and mineralized effect of osteoblasts. Procyanidins (PC) have been reported to have anti-oxidation effects, but low bioavailability. This study aimed to explore the effect of magnesium oxide nanoparticles (MgO-PC NPs)-loaded PC on the osteogenesis and mineralization of osteoblasts that stimulated by H2O2. PC was loaded onto MgO NPs and characterized by transmission electron microscopy, energy dispersive spectroscopy, dynamic light scattering, and Fourier transform infrared spectroscopy. After primary screening by cytotoxicity assay, MgO-PC NPs containing 20 µM of PC were chosen for further studies. In H2O2-stimulated osteoblasts, dichlorodihydrofluorescein diacetate probe, Cell Counting Kit-8, quantitative real-time polymerase chain reaction, alkaline phosphatase staining/activity and Alizarin red staining were used to detect the ROS production, cell viability and osteogenic and mineralized markers of osteoblasts. PC was loaded onto MgO NPs to successfully receive MgO-PC NPs with a diameter of about 144 nm and negative potential. PC can sustain release from MgO-PC NPs for at least 16 d. The controlled release of PC from MgO-PC NPs can effectively eliminate ROS and thereby promoted the cell activity. Most importantly, the osteogenesis and mineralization of osteoblasts under oxidative stress were also significantly reversed by MgO-PC NPS. Thus, these findings indicate that MgO-PC NPs may be developed as a potential therapeutic strategy for OP.

Mechanical Behaviour of Novel Nanohybrid Resin Composite Using Two Light Cure Systems.

INTRODUCTION: Zein-incorporated magnesium oxide nanoparticles (zMgO NPs) were found to be effective against the bacteria S. mutans, S. aureus, E. faecalis and C. albicans, and can impart this antimicrobial effect on the resin composite it is integrated with. However, the effect of different light curing systems on the mechanical properties of this novel biomaterial has yet to be investigated. The objective of this study was to assess the effect of light-emitting diode (LED) and quarts-tungsten halogen (QTH) light curing systems on the compressive strength, flexural strength, and microhardness of bulk-fill resin composite modified with zMgO NPs. METHODOLOGY: A Teflon mold was used to fabricate 180 bulk-fill composite samples with concentrations of zMgO NPs at 0%, 0.3% and 0.5% (n = 60). Samples of each group were allocated to light curing by LED or QTH, after which 10 samples of each group were allotted to a mechanical test. Characterization of the specimens was performed by X-ray diffraction, field emission scanning electron microscopy and Fourier transform infrared spectroscopy. Two-way ANOVA and Tukey's post-hoc test was conducted at P = .05 to determine significance. RESULTS: The characterization revealed a uniform distribution of nanoparticles in the matrix and the formation of a new hybrid composite that maintained its properties. The compressive strength of the 0.3% zMgO composite for the QTH group significantly increased, while the remaining groups underwent no significant change. There was no significant difference among the groups for the flexural strength and microhardness tests. CONCLUSION: The modified composites' compressive strength, flexural strength, and microhardness improved or remained consistent. Long-term clinical studies can further substantiate the enhanced resin composite. CLINICAL RELEVANCE: The modified composite will exhibit similar or improved mechanical properties whether an LED or QTH light cure device is used. The addition of an antimicrobial effect to bulk-fill resin composite will aid in the prevention of secondary caries.

Interrelationship among substrate utilization, metabolic productions, and housekeeping-related gene expression levels in Mortierella alpine CBS 754.68.

The impacts of Magnesium oxide nanoparticles (MgONPs) on the expression of 10 potential housekeeping genes of Mortierella alpine were assayed. Actin emerged as the good candidate when Mortierella alpine entered the death phase subsequent to the growth phase while Dihydropteridine reductase and 28 s were identified as suitable candidates when Mortierella alpine remained in the growth phase.

Nano-PCR for the early detection of tomato leaf curl virus.

Nano-PCR is a potential tool for the early detection of plant viruses. In the current study, different concentrations of silver nanoparticles (20 nm) and magnesium oxide nanoparticles (50 nm) were included in the PCR mixture to improve the sensitivity of PCR for the detection of tomato leaf curl virus. The inclusion of nanoparticles in single or combination in PCR mixture has resulted in improvement of PCR sensitivity. Four-fold improvement was exhibited by the inclusion of 3 ng/µL silver nanoparticles, whereas the combination of silver and magnesium oxide nanoparticles (3 ng/µL and 200 ng/µL, respectively), resulted in a 4.5-fold improvement. The inclusion of 200 ng/µL of magnesium oxide nanoparticles in the PCR mixture exhibited a 7.6-fold increase in PCR sensitivity. Replacement of magnesium chloride with a combination of silver and magnesium oxide nanoparticles (3 ng/µL and 275 ng/µL, respectively) resulted in a 12-fold increase. A 13-fold improvement in PCR sensitivity was observed by the replacement of magnesium chloride in PCR buffer with 275 ng/µL of magnesium oxide nanoparticles. This could also produce detectable amplicon in PCR with a minimum of 25 cycles, resulting in a 26.5% reduction in the duration of PCR. This is the first report on the use of magnesium oxide nanoparticles in PCR for the early detection and better management of tomato leaf curl virus. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03842-2.

An experimental investigation and flow-system simulation about the influencing of silica-magnesium oxide nano-mixture on enhancing the rheological properties of Iraqi crude oil.

This study aims to investigate the effects of introducing a 50/50 mixture of silica and magnesium oxide nanoparticles (SNP + MgONP) to the viscosity of Al-Ahdab crude oil (Iraq) at varied concentrations and temperatures. It is observed that the viscosity value drops from 38.49 to 7.8 cP. The highest degree of viscosity reduction is measured to be 56.91% at the maximum temperature of 50 °C and the greatest concentration of 0.4 wt% SM4. The Bingham model can be used to classify the behavior of the crude oil before the Nano-mixture is added. The liquid behavior grew closer to Newtonian behavior once the Nano-mixture was added. Along with a rise in plastic and effective viscosity values, the yield stress value decreases as the concentration of the Nano-mixture increases. The numerical data demonstrate that when the volume proportion of nanoparticles increases, the pressure distribution decreases. Furthermore, as the nanoparticle volume fraction increases, the drag decrease would also increase. SM4 obtains a maximum drag reduction of 53.17%. It is discovered that the sample SM4 has a maximum flow rate increase of 2.408%. Because they reduce the viscosity of crude oil, nanoparticles also reduce the friction factor ratio.

Maximizing dental composite performance: Strength and hardness enhanced by innovative polymer-coated MgO nanoparticles.

INTRODUCTION: Zein-incorporated magnesium oxide nanoparticles (zMgO NPs) can influence the mechanical properties of dental materials. However, the effect of this addition on the mechanical properties of resin composite has yet to be investigated. The objective of this study was to add various concentrations of zMgO NPs to conventional, flowable, and bulk-fill composite and assess the effect on the compressive strength, flexural strength, and microhardness. METHODOLOGY: 150 samples each of conventional composite, flowable composite, and bulk-fill composite (n = 450) were enhanced with concentrations of zMgO NPs at 0 %, 0.3 %, 0.5 %, 1 %, and 2 % (n = 30). 10 samples of each group were randomly allotted to the compressive strength, flexural strength, or hardness test. Characterization of the specimens was performed by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy. Two-way ANOVA test was used to compare between groups, and one-way ANOVA followed by Tukey's test was done at p = 0.05 to determine significance. RESULTS: Characterization yielded a uniform distribution of nanoparticles in the matrix and the formation of a new hybrid composite that maintained its properties. Composite of all types enhanced with 0.3 % and 0.5 % zMgO NPs demonstrated a statistically significant increase in compressive strength, flexural strength, and hardness when compared to the control (p < 0.05). The bulk-fill composite with zMgO NPs concentrations of all groups demonstrated a statistically significant increase (p < 0.05) in hardness when compared to the control. CONCLUSION: The modified composites' compressive strength, flexural strength, and hardness improved or remained consistent. CLINICAL SIGNIFICANCE: An improved dental resin composite will enhance the quality of care and patient experience. The augmented strength and hardness of resin composite is desirable in prolonging the durability of the restoration.

Unveiling the molecular networks underlying cellular impairment in Saccharomyces cerevisiae: investigating the effects of magnesium oxide nanoparticles on cell wall integrity and endoplasmic reticulum stress response.

Nanoparticles, particularly magnesium oxide nanoparticles (MgO-NPs), are increasingly utilized in various fields, yet their potential impact on cellular systems remains a topic of concern. This study aimed to comprehensively investigate the molecular mechanisms underlying MgO-NP-induced cellular impairment in Saccharomyces cerevisiae, with a focus on cell wall integrity, endoplasmic reticulum (ER) stress response, mitochondrial function, lipid metabolism, autophagy, and epigenetic alterations. MgO-NPs were synthesized through a chemical reduction method, characterized for morphology, size distribution, and elemental composition. Concentration-dependent toxicity assays were conducted to evaluate the inhibitory effect on yeast growth, accompanied by propidium iodide (PI) staining to assess membrane damage. Intracellular reactive oxygen species (ROS) accumulation was measured, and chitin synthesis, indicative of cell wall perturbation, was examined along with the expression of chitin synthesis genes. Mitochondrial function was assessed through Psd1 localization, and ER structure was analyzed using dsRed-HDEL marker. The unfolded protein response (UPR) pathway activation was monitored, and lipid droplet formation and autophagy induction were investigated. Results demonstrated a dose-dependent inhibition of yeast growth by MgO-NPs, with concomitant membrane damage and ROS accumulation. Cell wall perturbation was evidenced by increased chitin synthesis and upregulation of chitin synthesis genes. MgO-NPs impaired mitochondrial function, disrupted ER structure, and activated the UPR pathway. Lipid droplet formation and autophagy were induced, indicating cellular stress responses. Additionally, MgO-NPs exhibited differential cytotoxicity on histone mutant strains, implicating specific histone residues in cellular response to nanoparticle stress. Immunoblotting revealed alterations in histone posttranslational modifications, particularly enhanced methylation of H3K4me. This study provides comprehensive insights into the multifaceted effects of MgO-NPs on S. cerevisiae, elucidating key molecular pathways involved in nanoparticle-induced cellular impairment. Understanding these mechanisms is crucial for assessing nanoparticle toxicity and developing strategies for safer nanoparticle applications.

Recent Advances in Magnesium-Magnesium Oxide Nanoparticle Composites for Biomedical Applications.

Magnesium (Mg) is considered an attractive option for orthopedic applications due to its density and elastic modulus close to the natural bone of the body, as well as biodegradability and good tensile strength. However, it faces serious challenges, including a high degradation rate and, as a result, a loss of mechanical properties during long periods of exposure to the biological environment. Also, among its other weaknesses, it can be mentioned that it does not deal with bacterial biofilms. It has been found that making composites by synergizing its various components can be an efficient way to improve its properties. Among metal oxide nanoparticles, magnesium oxide nanoparticles (MgO NPs) have distinct physicochemical and biological properties, including biocompatibility, biodegradability, high bioactivity, significant antibacterial properties, and good mechanical properties, which make it a good choice as a reinforcement in composites. However, the lack of comprehensive understanding of the effectiveness of Mg NPs as Mg matrix reinforcements in mechanical, corrosion, and biological fields is considered a challenge in their application. While introducing the role of MgO NPs in medical fields, this article summarizes the most important results of recent research on the mechanical, corrosion, and biological performance of Mg/MgO composites.

Bond strength and surface roughness assessment of novel antimicrobial polymeric coated dental cement.

Resin cement integrated with zein-incorporated magnesium oxide nanoparticles has previously been found to inhibit oral microbes and decrease bacterial biofilm. However, the bond strength and surface features of this biomaterial have yet to be investigated. The objective of this study was to evaluate the shear bond strength, mode of fracture, and surface roughness of resin cement modified with zein-incorporated magnesium oxide nanoparticles. Characterization of the cement was performed by X-ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. 126 human teeth were divided into 3 groups and cemented to lithium disilicate ceramic using resin cement with zein-incorporated magnesium oxide nanoparticles at concentrations of 0%, 1%, and 2% (n = 42). 21 samples of each group were subjected to the shear bond strength test, while the other 21 underwent thermocycling for 10,000 cycles before the test, after which all samples were evaluated for the mode of fracture. To assess surface roughness, resin cement disks were analyzed by a profilometer before and after undergoing thermocycling for 10,000 cycles. The shear bond strength of the cement with 1% and 2% nanoparticles was significantly higher than the control before thermocycling. The mode of fracture was found to be mainly adhesive with all groups, with the unmodified cement presenting the highest cohesive failure. There was no significant difference in surface roughness between the groups before or after thermocycling. The addition of zein-incorporated magnesium oxide nanoparticles to resin cement improved or maintained the shear bond strength and surface roughness of the resin cement.

Osteogenic Potential of Magnesium Oxide Nanoparticles in Bone Regeneration: A Systematic Review.

Guided bone regeneration (GBR) plays a crucial role in the augmentation of alveolar bone, especially in cases of dental implants. The main principle behind using membranes in guided tissue regeneration (GTR) is to prevent epithelial downgrowth as well as connective tissue on the root surface. However, the membranes lack some major properties, such as osteogenic and antimicrobial properties. Magnesium (Mg) is one of the biodegradable materials that is gaining interest because of its favourable mechanical properties and biocompatibility. It also possesses pro-osteogenic properties and significant inhibition of biofilm formation and maturation. These features have attracted increasing interest in using magnesium oxide nanoparticles in GBR membrane applications. This systematic review assesses the osteogenic potential of magnesium oxide nanoparticles in periodontal bone regeneration. The literature search used PubMed, PubMed Central, Medline, and Cochrane databases to examine systematic reviews published till March 2023. Seven articles were included based on the selection criteria. We included all in vitro and in vivo clinical studies based on the osteogenic potential of magnesium oxide nanoparticles in periodontal bone regeneration. The seven studies provided evidence that magnesium oxide nanoparticles, when incorporated in any substrate, showed higher osteogenic potential in terms of higher alkaline phosphatase levels, bone volume fraction, and bone mineral density. The optimum concentration of magnesium oxide can be an ideal additive to various substrates to promote bone regeneration. Because most of the studies were conducted on calvarial defects, further studies should focus only on bone regeneration related to periodontal regeneration.