Comparison of two biological systems used for phototoxicity testing: Cellular and tissue.

The OECD has approved two similar methods for testing the phototoxic potency of chemicals. The first method, OECD 432, is based on the cytotoxicity properties of materials to the mouse 3T3 (clone A31) cell line (fibroblasts) after exposure to light. The second method, OECD 498, is based on the same properties but using reconstructed human epidermis - EpiDerm (stratified keratinocytes). The aim of this study was to compare these two methods using statistical tests (specificity, sensitivity, negative predictive value, positive predictive value and accuracy) and non-statistical characteristics (e.g. price and experimental duration, amount of material, level of complications, cell type, irradiation dose). Both tests were performed according to the relevant guidelines using the same 11 control substances. Higher performance values were observed for OECD 432 in both phototoxic and non-phototoxic classifications. The accuracy of OECD 432 was 90.9%, while that of OECD 498 was 72.7%. OECD 432 was also shorter and less expensive. On the other hand, OECD 498 was less complicated, and used human cells with stratum corneum, which better reflects real skin. This method can also be used with oily substances that are poorly soluble in water. However, both methods are important for testing the phototoxic properties of materials, and can be used alone or in a tiered strategy.

Adapting the in vitro micronucleus assay (OECD Test Guideline No. 487) for testing of manufactured nanomaterials: recommendations for best practices.

The current Organisation for Economic Co-Operation and Development test guideline number 487 (OECD TG No. 487) provides instruction on how to conduct the in vitro micronucleus assay. This assay is one of the gold standard approaches for measuring the mutagenicity of test items; however, it is directed at testing low molecular weight molecules and may not be appropriate for particulate materials (e.g. engineered nanoparticles [ENPs]). This study aimed to adapt the in vitro micronucleus assay for ENP testing and underpins the development of an OECD guidance document. A harmonized, nano-specific protocol was generated and evaluated by two independent laboratories. Cell lines utilized were human lymphoblastoid (TK6) cells, human liver hepatocytes (HepG2) cells, Chinese hamster lung fibroblast (V79) cells, whole blood, and buffy coat cells from healthy human volunteers. These cells were exposed to reference ENPs from the Joint Research Council (JRC): SiO2 (RLS-0102), Au5nm and Au30nm (RLS-03, RLS-010), CeO2 (NM212), and BaSO4 (NM220). Tungsten carbide-cobalt (WC/Co) was used as a trial particulate positive control. The chemical controls were positive in all cell cultures, but WC/Co was only positive in TK6 and buffy coat cells. In TK6 cells, mutagenicity was observed for SiO2- and both Au types. In HepG2 cells, Au5nm and SiO2 showed sub-two-fold increases in micronuclei. In V79 cells, whole blood, and buffy coat cells, no genotoxicity was detected with the test materials. The data confirmed that ENPs could be tested with the harmonized protocol, additionally, concordant data were observed across the two laboratories with V79 cells. WC/Co may be a suitable particulate positive control in the in vitro micronucleus assay when using TK6 and buffy coat cells. Detailed recommendations are therefore provided to adapt OECD TG No. 487 for testing ENP.

Evaluating the conduct and reporting of the T-cell dependent antibody response in the Extended One-Generation Reproductive Toxicity study provided under the EU REACH regulation.

The European Union (EU) Chemicals Strategy for Sustainability regards chemicals that affect the immune system among the most harmful ones. The Extended One-Generation Reproductive Toxicity study (EOGRTS; Organisation for Economic Co-Operation and Development (OECD) Test Guideline (TG) 443), addresses, among others, potential effects of chemicals on development. In specific cases, the EOGRTS is performed with addition of a so-called cohort 3, that addresses potential effects on the developing immune system, by means of a central assay measuring the T-cell dependent antibody response (TDAR). This assay is based on an interplay of antigen presentation, T-cell help and antibody production by B-cells, and together comprises a functional immune response. In the context of the EOGRTS review project of the European Chemicals Agency (ECHA), we evaluated 15 available TDARs for compliance with conduct and reporting requirements. Collectively, the majority of the TDAR studies were considered to be adequately conducted. We however observed: (i) the protocols differed by the antigen used (sheep red blood cells (SRBC) or KLH), the route of administration (intravenous, intraperitoneal, or subcutaneous), prime or prime/boost immunizations, and whether IgG was measured. (ii) There was major variation in the effects of the positive control for immunosuppression, cyclophosphamide. (iii) Proficiency was not always shown. (iv) Statistical analysis was not always done or reported. (v) Results of effects on lymphocyte populations or other immunotoxicity observations obtained in cohort 1 (or 2) of the EOGRTS were not always discussed together with results of the TDAR. Taken together, next to an improved quality of reporting, this may suggest a need to better define the conduct of the TDAR in OECD TG 443 and OECD Guidance Document (GD) 151, at least for certain aspects.

Screening persistent organic pollutants for effects on testosterone and estrogen synthesis at human-relevant concentrations using H295R cells in 96-well plates.

Many persistent organic pollutants (POPs) are suspected endocrine disruptors and it is important to investigate their effects at low concentrations relevant to human exposure. Here, the OECD test guideline #456 steroidogenesis assay was downscaled to a 96-well microplate format to screen 24 POPs for their effects on viability, and testosterone and estradiol synthesis using the human adrenocortical cell line H295R. The compounds (six polyfluoroalkyl substances, five organochlorine pesticides, ten polychlorinated biphenyls and three polybrominated diphenyl ethers) were tested at human-relevant levels (1 nM to 10 µM). Increased estradiol synthesis, above the OECD guideline threshold of 1.5-fold solvent control, was shown after exposure to 10 µM PCB-156 (153%) and PCB-180 (196%). Interestingly, the base hormone synthesis varied depending on the cell batch. An alternative data analysis using a linear mixed-effects model that include multiple independent experiments and considers batch-dependent variation was therefore applied. This approach revealed small but statistically significant effects on estradiol or testosterone synthesis for 17 compounds. Increased testosterone levels were demonstrated even at 1 nM for PCB-74 (18%), PCB-99 (29%), PCB-118 (16%), PCB-138 (19%), PCB-180 (22%), and PBDE-153 (21%). The MTT assay revealed significant effects on cell viability after exposure to 1 nM of perfluoroundecanoic acid (12%), 3 nM PBDE-153 (9%), and 10 µM of PCB-156 (6%). This shows that some POPs can interfere with endocrine signaling at concentrations found in human blood, highlighting the need for further investigation into the toxicological mechanisms of POPs and their mixtures at low concentrations relevant to human exposure.

Rethinking the applicability domain analysis in QSAR models.

Notwithstanding the wide adoption of the OECD principles (or best practices) for QSAR modeling, disparities between in silico predictions and experimental results are frequent, suggesting that model predictions are often too optimistic. Of these OECD principles, the applicability domain (AD) estimation has been recognized in several reports in the literature to be one of the most challenging, implying that the actual reliability measures of model predictions are often unreliable. Applying tree-based error analysis workflows on 5 QSAR models reported in the literature and available in the QsarDB repository, i.e., androgen receptor bioactivity (agonists, antagonists, and binders, respectively) and membrane permeability (highest membrane permeability and the intrinsic permeability), we demonstrate that predictions erroneously tagged as reliable (AD prediction errors) overwhelmingly correspond to instances in subspaces (cohorts) with the highest prediction error rates, highlighting the inhomogeneity of the AD space. In this sense, we call for more stringent AD analysis guidelines which require the incorporation of model error analysis schemes, to provide critical insight on the reliability of underlying AD algorithms. Additionally, any selected AD method should be rigorously validated to demonstrate its suitability for the model space over which it is applied. These steps will ultimately contribute to more accurate estimations of the reliability of model predictions. Finally, error analysis may also be useful in "rational" model refinement in that data expansion efforts and model retraining are focused on cohorts with the highest error rates.

Considering inequities in national dementia strategies: breadth, depth, and scope.

BACKGROUND: Considering that dementia is an international public health priority, several countries have developed national dementia strategies outlining initiatives to address challenges posed by the disease. These strategies aim to improve the care, support, and resources available to meet the needs of persons living with dementia and their care partners and communities. Despite the known impact of social determinants of health on dementia risk, care, and outcomes, it is unclear whether dementia strategies adequately address related inequities. This study aimed to describe whether and how national dementia strategies considered inequities associated with social determinants of health. METHODS: We conducted an environmental scan of the national dementia strategies of countries that are part of the Organisation for Economic Cooperation and Development (OECD). Included strategies had to be accessible in English or French. Sub-national or provincial plans were excluded. We synthesised information on strategies' considerations of inequity through a thematic analysis. RESULTS: Of the 15 dementia strategies that met inclusion criteria, 13 mentioned at least one inequity (M = 2.4, median = 2, range:0-7) related to Race/Ethnicity; Religion; Age; Disability; Sexual Orientation/Gender Identity; Social Class; or Rurality. Age and disability were mentioned most frequently, and religion most infrequently. Eleven strategies included general inequity-focused objectives, while only 5 had specific inequity-focused objectives in the form of tangible percentage changes, deadlines, or allocated budgets for achieving equity-related goals outlined in their strategies. CONCLUSIONS: Understanding if and how countries consider inequities in their dementia strategies enables the development of future strategies that adequately target inequities of concern. While most of the strategies mentioned inequities, few included tangible objectives to reduce them. Countries must not only consider inequities at a surface-level; rather, they must put forth actionable objectives that intend to lessen the impact of inequities in the care of all persons living with dementia.

Fish acute toxicity of nine nanomaterials: Need of pre-tests to ensure comparability and reuse of data.

Fish acute toxicity tests are commonly used in aquatic environmental risk assessments, being required in different international substances regulations. A general trend in the toxicity testing of nanomaterials (NMs) has been to use standardized aquatic toxicity tests. However, as these tests were primarily developed for soluble chemical, issues regarding particle dissolution, agglomeration or sedimentation during the time of exposure are not considered when reporting the toxicity of NMs. The aim of this study was to characterize the NM behaviour throughout the fish acute test and to provide criteria to assay the toxicity of nine NMs based on TiO2, ZnO, SiO2, BaSO4, bentonite, and carbon nanotubes, on rainbow trout following OECD Test Guideline (TG) nº203. Our results showed the importance of conducting a preliminary test (without fish) when working with NMs. They provide valuable information on, sample monitoring, agglomeration, sedimentation, dissolution, actual concentrations of NMs, needed to design the test. Among the NMs tested, only bentonite nanoparticles were stable during the 96-h pre-test and test in aquarium water. In contrast, the remaining NMs exhibited considerable loss and sedimentation within the first 24 h. The high sedimentation observed for almost all NMs highlights the need of consistently measuring the concentrations throughout the entire duration of the fish acute toxicity test to make reliable concentration-response relationships. Notable differences emerged in LC50 values when using actual concentrations as nominal concentrations overestimated concentrations by up to 85.6%. Among all NMs tested, only ZnO NMs were toxic to rainbow trout. A flow chart was specifically developed for OECD TG 203, aiding users in making informed decisions regarding the selection of test systems and necessary modifications to ensure accurate, reliable, and reusable toxicity data. Our findings might contribute to the harmonization of TG 203 improving result reproducibility and interpretability and supporting the development of read-across and QSAR models.

Microbiological toxicity tests using standardized ISO/OECD methods-current state and outlook.

Microbial toxicity tests play an important role in various scientific and technical fields including the risk assessment of chemical compounds in the environment. There is a large battery of normalized tests available that have been standardized by ISO (International Organization for Standardization) and OECD (Organization for Economic Co-operation and Development) and which are worldwide accepted and applied. The focus of this review is to provide information on microbial toxicity tests, which are used to elucidate effects in other laboratory tests such as biodegradation tests, and for the prediction of effects in natural and technical aqueous compartments in the environment. The various standardized tests as well as not normalized methods are described and their advantages and disadvantages are discussed. In addition, the sensitivity and usefulness of such tests including a short comparison with other ecotoxicological tests is presented. Moreover, the far-reaching influence of microbial toxicity tests on biodegradation tests is also demonstrated. A new concept of the physiological potential of an inoculum (PPI) consisting of microbial toxicity tests whose results are expressed as a chemical resistance potential (CRP) and the biodegradation adaptation potential (BAP) of an inoculum is described that may be helpful to characterize inocula used for biodegradation tests. KEY POINTS: • Microbial toxicity tests standardized by ISO and OECD have large differences in sensitivity and applicability. • Standardized microbial toxicity tests in combination with biodegradability tests open a new way to characterize inocula for biodegradation tests. • Standardized microbial toxicity tests together with ecotoxicity tests can form a very effective toolbox for the characterization of toxic effects of chemicals.

Demonstrating the reliability of in vivo metabolomics based chemical grouping: towards best practice.

While grouping/read-across is widely used to fill data gaps, chemical registration dossiers are often rejected due to weak category justifications based on structural similarity only. Metabolomics provides a route to robust chemical categories via evidence of shared molecular effects across source and target substances. To gain international acceptance, this approach must demonstrate high reliability, and best-practice guidance is required. The MetAbolomics ring Trial for CHemical groupING (MATCHING), comprising six industrial, government and academic ring-trial partners, evaluated inter-laboratory reproducibility and worked towards best-practice. An independent team selected eight substances (WY-14643, 4-chloro-3-nitroaniline, 17α-methyl-testosterone, trenbolone, aniline, dichlorprop-p, 2-chloroaniline, fenofibrate); ring-trial partners were blinded to their identities and modes-of-action. Plasma samples were derived from 28-day rat tests (two doses per substance), aliquoted, and distributed to partners. Each partner applied their preferred liquid chromatography-mass spectrometry (LC-MS) metabolomics workflows to acquire, process, quality assess, statistically analyze and report their grouping results to the European Chemicals Agency, to ensure the blinding conditions of the ring trial. Five of six partners, whose metabolomics datasets passed quality control, correctly identified the grouping of eight test substances into three categories, for both male and female rats. Strikingly, this was achieved even though a range of metabolomics approaches were used. Through assessing intrastudy quality-control samples, the sixth partner observed high technical variation and was unable to group the substances. By comparing workflows, we conclude that some heterogeneity in metabolomics methods is not detrimental to consistent grouping, and that assessing data quality prior to grouping is essential. We recommend development of international guidance for quality-control acceptance criteria. This study demonstrates the reliability of metabolomics for chemical grouping and works towards best-practice.

Avoiding a reproducibility crisis in regulatory toxicology-on the fundamental role of ring trials.

The ongoing transition from chemical hazard and risk assessment based on animal studies to assessment relying mostly on non-animal data, requires a multitude of novel experimental methods, and this means that guidance on the validation and standardisation of test methods intended for international applicability and acceptance, needs to be updated. These so-called new approach methodologies (NAMs) must be applicable to the chemical regulatory domain and provide reliable data which are relevant to hazard and risk assessment. Confidence in and use of NAMs will depend on their reliability and relevance, and both are thoroughly assessed by validation. Validation is, however, a time- and resource-demanding process. As updates on validation guidance are conducted, the valuable components must be kept: Reliable data are and will remain fundamental. In 2016, the scientific community was made aware of the general crisis in scientific reproducibility-validated methods must not fall into this. In this commentary, we emphasize the central importance of ring trials in the validation of experimental methods. Ring trials are sometimes considered to be a major hold-up with little value added to the validation. Here, we clarify that ring trials are indispensable to demonstrate the robustness and reproducibility of a new method. Further, that methods do fail in method transfer and ring trials due to different stumbling blocks, but these provide learnings to ensure the robustness of new methods. At the same time, we identify what it would take to perform ring trials more efficiently, and how ring trials fit into the much-needed update to the guidance on the validation of NAMs.

Metabolism of alcohol ethoxylates (AEs) in rat, hamster, and human hepatocytes and liver S9: a pilot study for metabolic stability, metabolic pathway, and metabolites identification in vitro and in silico.

Alcohol ethoxylates (AEs) are a well-known class of non-ionic surfactants widely used by the personal care market. The aim of this study was to evaluate and characterize the in vitro metabolism of AEs and identify metabolites. Five selected individual homologue AEs (C8EO4, C10EO5, C12EO4, C16EO8, and C18EO3) were incubated using human, rat, and hamster liver S9 fraction and cryopreserved hepatocytes. LC-MS was used to identify metabolites following the incubation of AEs by liver S9 and hepatocytes of all three species. All AEs were metabolized in these systems with a half-life ranging from 2 to 139 min. In general, incubation of AE with human liver S9 showed a shorter half-life compared to rat liver S9. While rat hepatocytes metabolized AEs faster than human hepatocytes. Both hydrophobic alkyl chain and hydrophilic EO head group groups of AEs were found to be target sites of metabolism. Metabolites were identified that show primary hydroxylation and dehydrogenation, followed by O-dealkylation (shortening of EO head groups) and glucuronidation. Additionally, the detection of whole EO groups indicates the cleavage of the ether bond between the alkyl chain and the EO groups as a minor metabolic pathway in the current testing system. Furthermore, no difference in metabolic patterns of each individual homologue AE investigated was observed, regardless of alkyl chain length or the number of EO groups. Moreover, there is an excellent agreement between the in vitro experimental data and the metabolite profile simulations using in silico approaches (OECD QSAR Toolbox). Altogether, these data indicate fast metabolism of all AEs with a qualitatively similar metabolic pathway with some quantitative differences observed in the metabolite profiles. These metabolic studies using different species can provide important reference values for further safety evaluation.

New supporting data to guide the use of evident toxicity in acute oral toxicity studies (OECD TG 420).

Currently there are three test guidelines (TG) for acute oral toxicity studies of substances or mixtures from the Organisation for Economic Co-operation and Development (OECD). TG 423 and TG 425 use lethality as an endpoint, while TG 420 replaces death with 'evident toxicity', defined as clear signs that exposure to a higher dose would result in death. However, the perceived subjectivity of 'evident toxicity' may be preventing wider use of TG 420. To address this, the UK National Centre for the Replacement, Refinement and Reduction of Animals in Research (NC3Rs) and the European Partnership for Alternative Approaches to Animal Testing (EPAA) collaborated to provide recommendations on the recognition of 'evident toxicity'. Historical data from acute oral toxicity studies were analysed for clinical signs at the lower dose that could have predicted death at the higher dose. Several signs including ataxia, laboured respiration, and eyes partially closed, alone or in combination, are highly predictive. Others such as lethargy, decreased respiration, and loose faeces have lower but still appreciable positive predictive value (PPV). The data has been used to develop recommendations to promote use of TG 420 and thus reduce the suffering and numbers of animals used in acute oral toxicity studies.

In vivo alkaline comet assay: Statistical considerations on historical negative and positive control data.

The alkaline comet assay is frequently used as in vivo follow-up test within different regulatory environments to characterize the DNA-damaging potential of different test items. The corresponding OECD Test guideline 489 highlights the importance of statistical analyses and historical control data (HCD) but does not provide detailed procedures. Therefore, the working group "Statistics" of the German-speaking Society for Environmental Mutation Research (GUM) collected HCD from five laboratories and >200 comet assay studies and performed several statistical analyses. Key results included that (I) observed large inter-laboratory effects argue against the use of absolute quality thresholds, (II) > 50% zero values on a slide are considered problematic, due to their influence on slide or animal summary statistics, (III) the type of summarizing measure for single-cell data (e.g., median, arithmetic and geometric mean) may lead to extreme differences in resulting animal tail intensities and study outcome in the HCD. These summarizing values increase the reliability of analysis results by better meeting statistical model assumptions, but at the cost of information loss. Furthermore, the relation between negative and positive control groups in the data set was always satisfactorily (or sufficiently) based on ratio, difference and quantile analyses.

GARDskin dose-response assay and its application in conducting Quantitative Risk Assessment (QRA) for fragrance materials using a Next Generation Risk Assessment (NGRA) framework.

Development of New Approach Methodologies (NAMs) capable of providing a No Expected Sensitization Induction Level (NESIL) value remains a high priority for the fragrance industry for conducting a Quantitative Risk Assesment (QRA) to evaluate dermal sensitization. The in vitro GARDskin assay was recently adopted by the OECD (TG 442E) for the hazard identification of skin sensitizers. Continuous potency predictions are derived using a modified protocol that incorporates dose-response measurements. Linear regression models have been developed to predict human NESIL values. The aim of the study was to evaluate the precision and reproducibility of the continuous potency predictions from the GARDskin Dose-Response (DR) assay and its application in conducting QRA for fragrance materials using a Next Generation Risk Assessment (NGRA) framework. Results indicated that the GARDskin Dose-Response model predicted human NESIL values with a good degree of concordance with published NESIL values, which were also reproducible in 3 separate experiments. Using Isocyclocitral as an example, a QRA was conducted to determine its safe use levels in different consumer product types using a NGRA framework. This study represents a major step towards the establishment of the assay to derive NESIL values for conducting QRA evaluations for fragrance materials using a NGRA framework.

The dimer effect: A refinement approach towards skin sensitization assessment in-chemico using Amino acid Derivative Reactivity Assay.

Skin sensitization is a key endpoint for safety assessment, especially for cosmetics and personal care products. The adverse outcome pathway for skin sensitization and the chemical and biological events driving the induction of human skin sensitization are now well understood. Several non-animal test methods have been developed to predict sensitizer potential by measuring the impact of chemical sensitizers on these key events. In this work, we have focused on Key Event 1 (the molecular initiating step), which is based on formation of a covalent adduct between skin sensitizers and endogenous proteins and/or peptides in the skin. There exists three in-chemico assays approved by the Organization for Economic Co-operation and Development-(1) Direct Peptide Reactivity Assay (DPRA), (2) Amino Acid Derivative Reactivity Assay (ADRA), and (3) Kinetic Direct Peptide Reactivity Assay (kDPRA) to quantify peptide/amino acid derivative depletion after incubation with test chemicals. However, overestimated depletion of the cysteine-based peptide/amino acid derivatives is known in such assays because of the dimerization of the thiol group. In this present work, we report the synthesis and structural confirmation of the dimer of N-(2-[1-naphthyl]acetyl)-L-cysteine (NAC) from the ADRA assay to allow simultaneous determination of (a) peptide depletion by quantifying NAC monomer and (b) peptide dimerization by quantifying NAC dimer thereby eliminating the overestimation. We present a case study with three chemicals to demonstrate the importance of this approach. Thus, this simultaneous assay gives a more informed view of the peptide reactivity of chemicals to better identify skin sensitizers.

A 90-day preclinical toxicological evaluation in rats of a highly purified and concentrated mulberry leaf extract.

Mulberry (genus Morus) leaves have long been used as a human food, especially in Asia, and animal feed. More recently, mulberry leaf extracts have been introduced as a convenient way to consume mulberry for non-nutritional functional effects. Reducose® 5% is an Morus alba leaf extract that has been highly purified and standardized to a content of 5 ± 0.5% 1-deoxynojirimycin, a naturally present polyhydroxylated piperidine alkaloid analog of D-glucose. This extract has previously been evaluated in acute and subacute (28-day) oral toxicity studies in which no adverse effects of the test item were observed in mice or rats, respectively. Due to continued and growing interest in the extract in multinational markets, we have now further investigated potential toxic effects in subchronic (90-day) oral toxicity study in male and female Han:WIST rats. The test item was administered at doses of 850, 1700, and 2550 mg/kg bw/day, and did not cause adverse effects in clinical signs, body weight development, clinical pathology, gross pathology, or histopathology in comparison to the vehicle-control group. The no-observed-adverse-effect-level was determined to be 2550 mg/kg bw/day. These results add to the existing body of both preclinical and clinical work relevant to the safety of the extract and of interest to regulators in various global markets.

Acute and subacute oral toxicity evaluation of Ayurvedic formulation Tapyadi loha in rats.

Ayurveda is one of the oldest systems of traditional medicine that provides treatments for a wide range of acute and chronic health problems. It is a common myth amongst people that Ayurvedic drugs have no side effects, whereas the fact is that these drugs can cause adverse effects. Despite their wide use, the safety data of many Ayurvedic formulations are still unavailable. Tapyadi loha is an Ayurvedic formulation traditionally claimed for iron deficiency anemia in pregnant and non-pregnant patients. However, no scientific study has been conducted to evaluate its oral toxicity. Hence, the present study evaluated the acute and subacute oral toxicity of the Tapyadi loha according to the OECD test guidelines 425 and 407, respectively. Tapyadi loha did not cause mortality nor any signs of toxicity when given once orally at a dose of 2000 mg/kg. Subacute toxicity study showed no mortality as well as no behavioral, hematological, biochemical and histopathological abnormalities in rats treated with Tapyadi loha formulation at 250, 500 and 1000 mg/kg for 28 days. It is concluded that the Tapyadi loha is safe at a single dose of 2000 mg/kg and 28 days repeated dose of 1000 mg/kg by oral route in rats.

Exploring structure/property relationships to health and environmental hazards of polymeric polyisocyanate prepolymer substances-3. Aquatic exposure and hazard of aliphatic diisocyanate-based prepolymers.

The water extractability and acute aquatic toxicity of seven aliphatic diisocyanate-based prepolymer substances were investigated to determine if lesser reactivity of the aliphatic isocyanate groups, as well as increased ionization potential of the expected (aliphatic amine-terminated) polymeric hydrolysis products, would influence their aquatic behavior compared to that of previously investigated aromatic diisocyanate-based prepolymers. At loading rates of 100 and 1,000 mg/L, only the substances having log Kow ≤9 exhibited more than 1% extractability in water, and a maximum of 66% water extractability was determined for a prepolymer having log Kow = 2.2. For the more hydrophobic prepolymer substances (log Kow values from 18-37), water extractability was negligible. High-resolution mass spectrometric analyses were performed on the water-accommodated fractions (WAF) of the prepolymers, which indicated the occurrence of primary aliphatic amine-terminated polymer species having backbones and functional group equivalent weights aligned to those of the parent prepolymers. Measurements of reduced surface tension and presence of suspended micelles in the WAFs further supported the occurrence of these surface-active cationic polymer species as hydrolysis products of the prepolymers. Despite these characteristics, the water-extractable hydrolysis products were practically non-toxic to Daphnia magna. All of the substances tested exhibited 48-h EL50 values of >1,000 mg/L, with one exception of EL50 = 157 mg/L. The results from this investigation support a grouping of the aliphatic diisocyanate-based prepolymers as a class of water-reactive polymer substances having predictable aquatic exposure and a uniformly low hazard potential, consistent with that previously demonstrated for the aromatic diisocyanate-based prepolymers.

How effective is business climate on CO2 emissions? A MMQR analysis for OECD countries.

Business climate measures regulations' impact on establishment, competition, and growth. In markets with high business climate levels, adopting new environmentally friendly and sustainable technologies and practices contributes to protecting the environment. For instance, a business climate that encourages the use of renewable energy sources like solar or wind power can significantly reduce CO2 emissions. This study analyzes the impact of business climate on CO2 emissions. The study uses data from 37 OECD countries, a widely recognized and reliable source, from 2007 to 2020. The Moments Quantile Regression (MMQR) method was preferred for data analysis due to its ability to handle non-normal distributions and outliers, ensuring robust results. According to MMQR estimates, business climate causes CO2 emissions to decrease. The effect of business climate on CO2 is negative up to the 90th quantile. According to MMQR estimates, the negative impact of business climate on CO2 has statistical significance up to the 80th quantile. Therefore, in all countries where CO2 levels are low or high, business climate helps protect the environment. However, the impact coefficients of business climate on CO2 are much higher than renewable energy. For this reason, it is essential for countries that want to reduce CO2 levels to consider the business climate level along with renewable energy.

Environmental taxes, energy transition and sustainable environmental technologies: A comparative OECD region climate change analysis.

The integrated economic reforms in recent years have transformed human life, however, the subsequent rise in environmental challenges necessitates sustainable development goals to ensure net-zero transformation. Within the context of modern energy, economic, and environmental transformation, we deliberate how environmental taxes, energy transition, and sustainable environmental innovation impact climate change in 38 OECD economies. Our robust empirical investigation allows us to report that environmental taxation, sustainable environmental technology, and energy transition lower but GDP and trade openness exacerbate ecological challenges. We also divide the dataset in G7 and the rest of the OECD groups to document the varying impact of environmental policies within OECD economies. Our econometric analysis helps us report novel policy frameworks to solve climate challenges under the UN SDG agenda.