Biomineralized Piezoelectrically Active Scaffolds for Inducing Osteogenic Differentiation.

There is an endogenous electric field in living organisms, which plays a vital role in the development and regeneration of bone tissue. Therefore, self-powered piezoelectric material for bone repair has become hot research in recent years. However, the current piezoelectric materials for tissue regeneration still have the shortcomings of lack of biological activity and three-dimensional structure. Here, we proposed a three-dimensional polyurethane foam (PUF) scaffold coated with piezoelectric poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and modified by a calcium phosphate (CaP) mineralized coating. The preferred scaffold has an open circuit voltage and short circuit current output of 5 V and 200 nA. Combining the physical and chemical properties of the CaP coating, the piezoelectric signal of PVDF-HFP and the three-dimensional structure of PUF, the scaffold exhibits superior promotion of cell osteogenic differentiation and ectopic bone formation in vivo. The mechanism is attributed to an increase in intracellular Ca2+ levels in response to chemical and piezoelectric stimulation with the material. This research not only paves the way for the application of piezoelectric scaffolds to stimulate osteoblasts differentiation in situ, but also lays the foundation for the clinical treatment of long-term osteoporosis.

Osteoinduction and osteoimmunology: Emerging concepts.

The recognition and importance of immune cells during bone regeneration, including around bone biomaterials, has led to the development of an entire field termed "osteoimmunology," which focuses on the connection and interplay between the skeletal system and immune cells. Most studies have focused on the "osteogenic" capacity of various types of bone biomaterials, and much less focus has been placed on immune cells despite being the first cell type in contact with implantable devices. Thus, the amount of literature generated to date on this topic makes it challenging to extract needed information. This review article serves as a guide highlighting advancements made in the field of osteoimmunology emphasizing the role of the osteoimmunomodulatory properties of biomaterials and their impact on osteoinduction. First, the various immune cell types involved in bone biomaterial integration are discussed, including the prominent role of osteal macrophages (OsteoMacs) during bone regeneration. Thereafter, key biomaterial properties, including topography, wettability, surface charge, and adsorption of cytokines, growth factors, ions, and other bioactive molecules, are discussed in terms of their impact on immune responses. These findings highlight and recognize the importance of the immune system and osteoimmunology, leading to a shift in the traditional models used to understand and evaluate biomaterials for bone regeneration.

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design.

The repair of large cranial defects with bone is a major clinical challenge that necessitates novel materials and engineering solutions. Three-dimensionally (3D) printed bioceramic (BioCer) implants consisting of additively manufactured titanium frames enveloped with CaP BioCer or titanium control implants with similar designs were implanted in the ovine skull and at s.c. sites and retrieved after 12 and 3 mo, respectively. Samples were collected for morphological, ultrastructural, and compositional analyses using histology, electron microscopy, and Raman spectroscopy. Here, we show that BioCer implants provide osteoinductive and microarchitectural cues that promote in situ bone regeneration at locations distant from existing host bone, whereas bone regeneration with inert titanium implants was confined to ingrowth from the defect boundaries. The BioCer implant promoted bone regeneration at nonosseous sites, and bone bonding to the implant was demonstrated at the ultrastructural level. BioCer transformed to carbonated apatite in vivo, and the regenerated bone displayed a molecular composition indistinguishable from that of native bone. Proof-of-principle that this approach may represent a shift from mere reconstruction to in situ regeneration was provided by a retrieved human specimen, showing that the BioCer was transformed into well-vascularized osteonal bone, with a morphology, ultrastructure, and composition similar to those of native human skull bone.

Synthesis, Characterization, and Bioactivity of Mesoporous Bioactive Glass Codoped with Zinc and Silver.

Due to the overconsumption of antimicrobials, antibiotic-resistant bacteria have become a critical health issue worldwide, especially methicillin-resistant S. aureus (MRSA) and vancomycin-resistant E. faecalis (VRE). Recently, many efforts have been made to load metals into bioactive glasses to enhance the multifunctionality of materials, such as antibacterial and osteoinductive functions. Zinc has been documented to stimulate the gene expression of various regulatory factors in bone cells. Meanwhile, previous studies have reported that silver and zinc could be a promising antibacterial combination with synergistic antimicrobial effects. Here, we sought to develop a biomaterial coreleasing zinc and silver, designated 80S-ZnAg, and to evaluate its antibacterial activity and biocompatibility. The textural analyses demonstrated different coreleasing patterns of zinc and silver for the materials. The chemical characterization revealed that the zinc in 80S-ZnAg could be the network modifier when its molar ratio was high, releasing more zinc; zinc could also be the network former when its molar ratio was low, showing an extremely low rate of release. However, the ICP results for 80S-Zn3Ag2 demonstrated up to 7.5 ppm of zinc and 67.6 ppm of silver. Among all the 80S-ZnAg materials, 80S-Zn3Ag2 demonstrated more marked antibacterial activity against MRSA and VRE than the others, with inhibition zones of 11.5 and 13.4 mm, respectively. The cytotoxicity assay exhibited nearly 90% cell viability at 20 mg/mL of 80-Zn3Ag2. Further clinical study is needed to develop an innovative biomaterial to address the issue of antibiotic resistance.

Evaluation of the Effectiveness of Bone Grafting in Alveolar Ridge Augmentation Using the Two-Stage Splitting Technique.

Stimulation of neoosteogenesis is the main mechanism of osseointegration during installation of dental implants, bone tissue recession, and alveolar process augmentation in adentia. In experiments on miniature pigs, we used the technology of two-stage splitting of the ridge of the alveolar process of the mandible in combination with a xenograft that was placed between the fragments of the split bone plate. The morphology of the reparative process and the distribution of osteogenic differentiation markers in the compact and trabecular bone of the alveolar crest were studied. Signs of reparative osteogenesis were observed in the bone regenerate that had a lamellar structure, formed osteons, and foci of woven tissue. It was found that the xenograft was replaced by newly formed trabecular bone tissue. These sites were characterized by increased expression of osteocalcin and CD44. Augmentation technology through two-stage splitting provides trophic relationship of osteoprogenitor cells and is an effective method of osteogenesis stimulation in the alveolar process.

Monocytes and pyrophosphate promote mesenchymal stem cell viability and early osteogenic differentiation.

Pyrophosphate-containing calcium phosphate implants promote osteoinduction and bone regeneration. The role of pyrophosphate for inflammatory cell-mesenchymal stem cell (MSC) cross-talk during osteogenesis is not known. In the present work, the effects of lipopolysaccharide (LPS) and pyrophosphate (PPi) on primary human monocytes and on osteogenic gene expression in human adipose-derived MSCs were evaluated in vitro, using conditioned media transfer as well as direct effect systems. Direct exposure to pyrophosphate increased nonadherent monocyte survival (by 120% without LPS and 235% with LPS) and MSC viability (LDH) (by 16-19% with and without LPS). Conditioned media from LPS-primed monocytes significantly upregulated osteogenic genes (ALP and RUNX2) and downregulated adipogenic (PPAR-γ) and chondrogenic (SOX9) genes in recipient MSCs. Moreover, the inclusion of PPi (250 µM) resulted in a 1.2- to 2-fold significant downregulation of SOX9 in the recipient MSCs, irrespective of LPS stimulation or culture media type. These results indicate that conditioned media from LPS-stimulated inflammatory monocytes potentiates the early MSCs commitment towards the osteogenic lineage and that direct pyrophosphate exposure to MSCs can promote their viability and reduce their chondrogenic gene expression. These results are the first to show that pyrophosphate can act as a survival factor for both human MSCs and primary monocytes and can influence the early MSC gene expression. Graphical abstract.

Role of magnesium-doped calcium sulfate and ß-tricalcium phosphate composite ceramics in macrophage polarization and osteo-induction.

In the current study, we explored the role of Mg2+-doped CaSO4/ß-TCP composite biopolymer in regulating macrophage polarization and its relation with enhanced osteogenic differentiation of periodontal ligament stem cells. Furthermore, mechanism underling the regulation of macrophage polarization by CaSO4/ß-TCP was evaluated. Mg2+-doped CaSO4/ß-TCP composite was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Macrophage polarization was characterized using flow cytometry analysis. Macrophage morphometric analysis was conducted by FITC phalloidin staining. Western blot and qRT-PCR assays were used to assess gene expression levels and miRNAs, respectively. SEM morphology of CaSO4/ß-TCP ceramic revealed a particle size of 10-50 µm, and XRD spectrum showed that characteristic peak of samples was consistent with that of CaSO4 and ß-TCP. Results from flow cytometry evidenced significant upregulation of M2 macrophage markers after adding ceramic biopolymer, indicating the induction of inactivated M0 macrophage polarization to M2 macrophage. Macrophage morphometric analysis revealed development of lamellar pseudopodia on day 7 in CaSO4/ß-TCP group. Furthermore, flow cytometry revealed high positivity rate of 90.34% (CD44) and 89.36% (CD146). qRT-PCR results showed that the level of miR-21-5p was significantly decreased in M2 macrophages. Moreover, western blot analysis revealed upregulated expression levels of RUNX2, osterix (Osx), and osteopontin (OPN), and ELISA exhibited increase in cytokine levels (IL-1ß, IL-10, TGF-ß1, and BMP-2) in the presence of macrophages, indicating the osteogenic differentiation ability of periodontal ligament stem cells. The study evidenced the regulation of macrophage polarization by Mg2+-doped CaSO4/ß-TCP composite ceramic and its mediation through lncRNA PVT1/miR-21-5p/smad2 molecular axis.

Macropore Regulation of Hydroxyapatite Osteoinduction via Microfluidic Pathway.

Macroporous characteristics have been shown to play a key role in the osteoinductivity of hydroxyapatite ceramics, but the physics underlying the new bone formation and distribution in such scaffolds still remain elusive. The work here has emphasized the osteoinductive capacity of porous hydroxyapatite scaffolds containing different macroporous sizes (200-400 µm, 1200-1500 µm) and geometries (star shape, spherical shape). The assumption is that both the size and shape of a macropore structure may affect the microfluidic pathways in the scaffolds, which results in the different bone formations and distribution. Herein, a mathematical model and an animal experiment were proposed to support this hypothesis. The results showed that the porous scaffolds with the spherical macropores and large pore sizes (1200-1500 µm) had higher new bone production and more uniform new bone distribution than others. A finite element analysis suggested that the macropore shape affected the distribution of the medium-high velocity flow field, while the macropore size effected microfluid speed and the value of the shear stress in the scaffolds. Additionally, the result of scaffolds implanted into the dorsal muscle having a higher new bone mass than the abdominal cavity suggested that the mechanical load of the host tissue could play a key role in the microfluidic pathway mechanism. All these findings suggested that the osteoinduction of these scaffolds depends on both the microfluid velocity and shear stress generated by the macropore size and shape. This study, therefore, provides new insights into the inherent osteoinductive mechanisms of bioceramics, and may offer clues toward a rational design of bioceramic scaffolds with improved osteoinductivity.

Recent Advances in Hydroxyapatite-Based Biocomposites for Bone Tissue Regeneration in Orthopedics.

Bone tissue is a nanocomposite consisting of an organic and inorganic matrix, in which the collagen component and the mineral phase are organized into complex and porous structures. Hydroxyapatite (HA) is the most used ceramic biomaterial since it mimics the mineral composition of the bone in vertebrates. However, this biomimetic material has poor mechanical properties, such as low tensile and compressive strength, which make it not suitable for bone tissue engineering (BTE). For this reason, HA is often used in combination with different polymers and crosslinkers in the form of composites to improve their mechanical properties and the overall performance of the implantable biomaterials developed for orthopedic applications. This review summarizes recent advances in HA-based biocomposites for bone regeneration, addressing the most widely employed inorganic matrices, the natural and synthetic polymers used as reinforcing components, and the crosslinkers added to improve the mechanical properties of the scaffolds. Besides presenting the main physical and chemical methods in tissue engineering applications, this survey shows that HA biocomposites are generally biocompatible, as per most in vitro and in vivo studies involving animal models and that the results of clinical studies on humans sometimes remain controversial. We believe this review will be helpful as introductory information for scientists studying HA materials in the biomedical field.

Graphene-Oxide Porous Biopolymer Hybrids Enhance In Vitro Osteogenic Differentiation and Promote Ectopic Osteogenesis In Vivo.

Over the years, natural-based scaffolds have presented impressive results for bone tissue engineering (BTE) application. Further, outstanding interactions have been observed during the interaction of graphene oxide (GO)-reinforced biomaterials with both specific cell cultures and injured bone during in vivo experimental conditions. This research hereby addresses the potential of fish gelatin/chitosan (GCs) hybrids reinforced with GO to support in vitro osteogenic differentiation and, further, to investigate its behavior when implanted ectopically. Standard GCs formulation was referenced against genipin (Gp) crosslinked blend and 0.5 wt.% additivated GO composite (GCsGp/GO 0.5 wt.%). Pre-osteoblasts were put in contact with these composites and induced to differentiate in vitro towards mature osteoblasts for 28 days. Specific bone makers were investigated by qPCR and immunolabeling. Next, CD1 mice models were used to assess de novo osteogenic potential by ectopic implantation in the subcutaneous dorsum pocket of the animals. After 4 weeks, alkaline phosphate (ALP) and calcium deposits together with collagen synthesis were investigated by biochemical analysis and histology, respectively. Further, ex vivo materials were studied after surgery regarding biomineralization and morphological changes by means of qualitative and quantitative methods. Furthermore, X-ray diffraction and Fourier-transform infrared spectroscopy underlined the newly fashioned material structuration by virtue of mineralized extracellular matrix. Specific bone markers determination stressed the osteogenic phenotype of the cells populating the material in vitro and successfully differentiated towards mature bone cells. In vivo results of specific histological staining assays highlighted collagen formation and calcium deposits, which were further validated by micro-CT. It was observed that the addition of 0.5 wt.% GO had an overall significant positive effect on both in vitro differentiation and in vivo bone cell recruitment in the subcutaneous region. These data support the GO bioactivity in osteogenesis mechanisms as being self-sufficient to elevate osteoblast differentiation and bone formation in ectopic sites while lacking the most common osteoinductive agents.

Evaluation of the Efficacy of Mineralized Dentin Graft in the Treatment of Intraosseous Defects: An Experimental In Vivo Study.

Background and Objectives: Dentin grafts have osteoinductive and osteoconductive properties and are considered as an alternative to autogenous graft. This study evaluates the efficacy of autogenous mineralized dentin graft (AMDG) alone or with xenograft and compares it with those of various graft materials used in the treatment of intraosseous bone defects. Materials and Methods: The third incisor teeth of six sheep (2-3 years old) were extracted and AMDG was obtained. Six defects were prepared on each tibia of these six sheep: empty defect (group E); autogenous graft (group A), dentin graft (group D), xenograft (group X), autogenous + xenograft (group A + X) and dentin + xenograft (group D + X). Three sheep in each group were sacrificed in the post-operative 3rd and 6th week and the histologic analyses were performed. Results: The D and D + X groups showed histological features similar to the other groups in the 3rd and 6th weeks. No statistically significant difference was found regarding the rates of new bone formation between the D and D + X groups (p = 1.0) and the other groups at both time intervals (p > 0.05). Conclusions: Similar results observed in this study between groups A, D, X, A + X and D + X demonstrate that AMDG can be successfully used in the treatment of intraosseous bone defects. Further experimental and clinical studies are needed to be able to evaluate the effectiveness of dentin grafts in different types of indications.

Osteoinduction within adipose tissue fragments by heterodimeric bone morphogenetic Proteins-2/6 and -2/7 versus homodimeric bone morphogenetic protein-2: Therapeutic implications for bone regeneration.

BACKGROUND: Fragments of subcutaneous adipose tissue that have been genetically modified to express bone morphogenetic protein-2 (BMP-2) regenerate large segmental osseous lesions in rodents. Gene-activated adipose tissue can be implanted into osseous defects without prior cell extraction and cell culture. The present study aimed to explore whether the heterodimers BMP-2/6 or BMP-2/7 exceed the osteoinductive effect of BMP-2 on adipose tissue. METHODS: In an in vitro tissue culture system, freshly harvested rat subcutaneous adipose tissue was cultivated in the presence of either BMP-2 or BMP-2/6 or BMP-2/7 at a high (200 ng/ml) and low (50 ng/ml) concentration. Gene expression analysis as well as histological and immunohistochemical methods were applied to test for osteoinduction. RESULTS: A concentration of 200 ng/ml of homodimeric BMP-2 induced osteogenic differentiation most potently, showing more calcification and a higher expression level of bone markers than both concentrations of BMP-2/6 or -2/7. A concentration of 50 ng/ml of BMP-2 was a significantly stronger osteogenic inducer than both concentrations of BMP-2/6 and the low concentration of BMP-2/7. The most potent heterodimeric driver of osteoinduction was BMP-2/7 at a high concentration, demonstrating effects similar to those of BMP-2 at a low concentration. CONCLUSIONS: Homodimeric BMP-2 evoked osteoinduction within adipose tissue more potently and at a lower concentration than heterodimeric BMP-2/6 or BMP-2/7. This result agrees well with the fact that it might be easier to translate adipose grafts activated by homodimeric BMP-2 clinically. Preclinical in vivo gene transfer studies are necessary to confirm the results of the present study.

Sustained zinc release in cooperation with CaP scaffold promoted bone regeneration via directing stem cell fate and triggering a pro-healing immune stimuli.

Metal ions have been identified as important bone metabolism regulators and widely used in the field of bone tissue engineering, however their exact role during bone regeneration remains unclear. Herein, the aim of study was to comprehensively explore the interactions between osteoinductive and osteo-immunomodulatory properties of these metal ions. In particular, the osteoinductive role of zinc ions (Zn2+), as well as its interactions with local immune microenvironment during bone healing process, was investigated in this study using a sustained Zn2+ delivery system incorporating Zn2+ into ß-tricalcium phosphate/poly(L-lactic acid) (TCP/PLLA) scaffolds. The presence of Zn2+ largely enhanced osteogenic differentiation of periosteum-derived progenitor cells (PDPCs), which was coincident with increased transition from M1 to M2 macrophages (M[Formula: see text]s). We further confirmed that induction of M2 polarization by Zn2+ was realized via PI3K/Akt/mTOR pathway, whereas marker molecules on this pathway were strictly regulated by the addition of Zn2+. Synergically, this favorable immunomodulatory effect of Zn2+ further improved the osteogenic differentiation of PDPCs induced by Zn2+ in vitro. Consistently, the spontaneous osteogenesis and pro-healing osteoimmunomodulation of the scaffolds were thoroughly identified in vivo using a rat air pouch model and a calvarial critical-size defect model. Taken together, Zn2+-releasing bioactive ceramics could be ideal scaffolds in bone tissue engineering due to their reciprocal interactions between osteoinductive and immunomodulatory characteristics. Clarification of this synergic role of Zn2+ during osteogenesis could pave the way to develop more sophisticated metal-ion based orthopedic therapeutic strategies.

Superior Osteo-Inductive and Osteo-Conductive Properties of Trabecular Titanium vs. PEEK Scaffolds on Human Mesenchymal Stem Cells: A Proof of Concept for the Use of Fusion Cages.

Fusion cages composed of titanium and its alloys are emerging as valuable alternative to standard polyetheretherketone (PEEK) ones routinely used in cervical and lumbar spine surgery. Aim of this study was to evaluate osteo-inductive and osteo-conductive ability of an innovative trabecular titanium (T-Ti) scaffold on human mesenchymal stem cells (hMSCs), in both absence and presence of biochemical osteogenic stimuli. Same abilities were assessed on PEEK and standard 2D plastic surface, the latter meant as gold-standard for in vitro differentiation studies. hMSCs adhered and colonized both T-Ti and PEEK scaffolds. In absence of osteogenic factors, T-Ti triggered osteogenic induction of MSCs, as demonstrated by alkaline phosphatase activity and calcium deposition increments, while PEEK and standard 2D did not. Addition of osteogenic stimuli reinforced osteogenic differentiation of hMSCs cultured on T-Ti in a significantly higher manner with respect to standard 2D plastic culture surfaces, whereas PEEK almost completely abolished the process. T-Ti driven differentiation towards osteoblasts was confirmed by gene and marker expression analyses, even in absence of osteogenic stimuli. These results clearly indicate superior in vitro osteo-inductive and osteo-conductive capacity of T-Ti compared to PEEK, and make ground for further studies supporting the use of T-Ti cages to improve bone fusion.

Influence of the Degree of Deacetylation of Chitosan and BMP-2 Concentration on Biocompatibility and Osteogenic Properties of BMP-2/PLA Granule-Loaded Chitosan/ß-Glycerophosphate Hydrogels.

Compositions based on chitosan/ß-glycerophosphate hydrogels with highly porous polylactide granules can be used to obtain moldable bone graft materials that have osteoinductive and osteoconductive properties. To eliminate the influence of such characteristics as chain length, degree of purification, and molecular weight on a designed material, the one-stock chitosan sample was reacetylated to degrees of deacetylation (DD%) of 19.5, 39, 49, 55, and 56. A study of the chitosan/ß-glycerophosphate hydrogel with chitosan of a reduced DD% showed that a low degree of deacetylation increased the MSCs (multipotent stromal cells) viability rate in vitro and reduced the leukocyte infiltration in subcutaneous implantation to Wistar rats in vivo. The addition of 12 wt% polylactide granules resulted in optimal composite mechanical and moldable properties, and increased the modulus of elasticity of the hydrogel-based material by approximately 100 times. Excessive filling of the material with PLA (polylactide) granules (more than 20%) led to material destruction at a ~10% strain. Osteoinductive and osteoconductive properties of the chitosan hydrogel-based material with reacetylated chitosan (39 DD%) and highly porous polylactide granules impregnated with BMP-2 (bone morphogenetic protein-2) have been demonstrated in models of orthotopic and ectopic bone formation. When implanted into a critical-size calvarial defect in rats, the optimal concentration of BMP-2 was 10 µg/mL: bone tissue areas filled the entire material's thickness. Implantation of the material with 50 µg/mL BMP-2 was accompanied with excessive growth of bone tissue and material displacement beyond the defect. Significant osteoinductive and osteoconductive properties of the material with 10 µg/mL of BMP-2 were also shown in subcutaneous implantation.

Induction of osteogenic differentiation by demineralized and decellularized bovine extracellular matrix derived hydrogels associated with barium titanate.

Bone tissue-derive biomaterials have become of great interest to treat diseases of the skeletal system. Biological scaffolds of demineralized and decellularized extracellular matrices (ECM) have been developed and one of these options are ECM hydrogels derived from bovine bone. Nanomaterials may be able to regulate stem cell differentiation due to their unique physical-chemical properties. The present work aimed to evaluate the osteoinductive effects of ECM hydrogels associated with barium titanate nanoparticles (BTNP) on dental pulp cells derived from exfoliated teeth. The addition of BTNP in the ECM derived hydrogel did not affect cell proliferation and the formation of bone nodules. Furthermore, it increased the expression of bone alkaline phosphatase. The results demonstrated that the nanobiocomposites were able to promote the osteogenic differentiation, even in the absence of chemical inducing factors for osteogenic differentiation. In conclusion, bovine bone ECM hydrogel combined with BTNP presented and increased expression of markers of osteogenic differentiation in the absence of chemical inducing factors.

Advances in dual functional antimicrobial and osteoinductive biomaterials for orthopaedic applications.

A vast growing problem in orthopaedic medicine is the increase of clinical cases with antibiotic resistant pathogenic microbes, which is predicted to cause higher mortality than all cancers combined by 2050. Bone infectious diseases limit the healing ability of tissues and increase the risk of future injuries due to pathologic tissue remodelling. The traditional treatment for bone infections has several drawbacks and limitations, such as lengthy antibiotic treatment, extensive surgical interventions, and removal of orthopaedic implants and/or prosthesis, all of these resulting in long-term rehabilitation. This is a huge burden to the public health system resulting in increased healthcare costs. Current technologies e.g. co-delivery systems, where antibacterial and osteoinductive agents are delivered encounter challenges such as site-specific delivery, sustained and prolonged release, and biocompatibility. In this review, these aspects are highlighted to promote the invention of the next generation biomaterials to prevent and/or treat bone infections and promote tissue regeneration.

Osteogenic Properties of Novel Methylsulfonylmethane-Coated Hydroxyapatite Scaffold.

Despite numerous advantages of using porous hydroxyapatite (HAp) scaffolds in bone regeneration, the material is limited in terms of osteoinduction. In this study, the porous scaffold made from nanosized HAp was coated with different concentrations of osteoinductive aqueous methylsulfonylmethane (MSM) solution (2.5, 5, 10, and 20%) and the corresponding MH scaffolds were referred to as MH2.5, MH5, MH10, and MH20, respectively. The results showed that all MH scaffolds resulted in burst release of MSM for up to 7 d. Cellular experiments were conducted using MC3T3-E1 preosteoblast cells, which showed no significant difference between the MH2.5 scaffold and the control with respect to the rate of cell proliferation (p > 0.05). There was no significant difference between each group at day 4 for alkaline phosphatase (ALP) activity, though the MH2.5 group showed higher level of activity than other groups at day 10. Calcium deposition, using alizarin red staining, showed that cell mineralization was significantly higher in the MH2.5 scaffold than that in the HAp scaffold (p < 0.0001). This study indicated that the MH2.5 scaffold has potential for both osteoinduction and osteoconduction in bone regeneration.

The Potential of Bone Debris as a Bioactive Composite for Bone Grafting in Arthroscopic Ankle Arthrodesis.

Arthroscopic ankle arthrodesis (AAA) has advantages of being less invasive and achieving a high bone union rate. However, there are still some nonunion or delayed union cases, especially those of high-grade deformity. During AAA, curettage of the subchondral bone using an abrader burr provides bone debris, and there is the possibility of bone debris being used as autograft to improve bone union. The purpose of this study is to analyze bone debris histologically, and the effect of its implantation on bone union of AAA. Bone debris from 6 patients was collected during AAA. Bone debris/atelocollagen composite was made and cultured for 4 weeks. Histological analyses were performed before and after culture. Twenty-six patients with AAA were divided into 2 groups with or without bone debris implantation, and the time to union after surgery was evaluated. In histological analysis of bone debris/atelocollagen composite, bone debris contained bone, cartilage and synovium fragment at time 0. After 4 weeks of culture, osteocalcin positive cells migrated and proliferated in the gel. Ki67 positive cells significantly increased after culture. In clinical cases, time to union was significantly shorter in the bone debris group (9.3 ± 1.3 weeks) than that in the control (12.4 ± 3.1 weeks). This study showed that bone debris contained the osteochonductive and osteoinductive properties, and there is the potential for its implantation into the ankle joint to improve bone union in ankle arthrodesis.

Expression of RUNX2 and Osterix in Rat Mesenchymal Stem Cells during Culturing in Osteogenic-Conditioned Medium.

We studied the expression of transcription factors RUNX2 and Osterix after addition of a concentrate of osteogenic-conditioned medium to the culture medium for osteogenic differentiation of mesenchymal stem cells (MSC). The obtained concentrate of osteogenic-conditioned medium containing a complex of bioactive substances with a molecular weight >10 kDa provided MSC differentiation into osteoblasts, which was confirmed by high level of expression of transcription factors RUNX2 and Osterix in comparison with the negative control. The highest expression of transcription factor Osterix was revealed on day 14 of MSC culturing in the presence of osteogenic supplement StemPro (positive control) and the studied concentrate of osteogenic-conditioned medium.