PB2 residue 473 contributes to the mammalian virulence of H7N9 avian influenza virus by modulating viral polymerase activity via ANP32A.

Since the first human infection reported in 2013, H7N9 avian influenza virus (AIV) has been regarded as a serious threat to human health. In this study, we sought to identify the virulence determinant of the H7N9 virus in mammalian hosts. By comparing the virulence of the SH/4664 H7N9 virus, a non-virulent H9N2 virus, and various H7N9-H9N2 hybrid viruses in infected mice, we first pinpointed PB2 as the primary viral factor accounting for the difference between H7N9 and H9N2 in mammalian virulence. We further analyzed the in vivo effects of individually mutating H7N9 PB2 residues different from the closely related H9N2 virus and consequently found residue 473, alongside the well-known residue 627, to be critical for the virulence of the H7N9 virus in mice and the activity of its reconstituted viral polymerase in mammalian cells. The importance of PB2-473 was further strengthened by studying reverse H7N9 substitutions in the H9N2 background. Finally, we surprisingly found that species-specific usage of ANP32A, a family member of host factors connecting with the PB2-627 polymorphism, mediates the contribution of PB2 473 residue to the mammalian adaption of AIV polymerase, as the attenuating effect of PB2 M473T on the viral polymerase activity and viral growth of the H7N9 virus could be efficiently complemented by co-expression of chicken ANP32A but not mouse ANP32A and ANP32B. Together, our studies uncovered the PB2 473 residue as a novel viral host range determinant of AIVs via species-specific co-opting of the ANP32 host factor to support viral polymerase activity.IMPORTANCEThe H7N9 avian influenza virus has been considered to have the potential to cause the next pandemic since the first case of human infection reported in 2013. In this study, we identified PB2 residue 473 as a new determinant of mouse virulence and mammalian adaptation of the viral polymerase of the H7N9 virus and its non-pathogenic H9N2 counterparts. We further demonstrated that the variation in PB2-473 is functionally linked to differential co-opting of the host ANP32A protein in supporting viral polymerase activity, which is analogous to the well-known PB2-627 polymorphism, albeit the two PB2 positions are spatially distant. By providing new mechanistic insight into the PB2-mediated host range determination of influenza A viruses, our study implicated the potential existence of multiple PB2-ANP32 interfaces that could be targets for developing new antivirals against the H7N9 virus as well as other mammalian-adapted influenza viruses.

Selenophosphate Pb2P2Se6 Single Crystals Growth by Chemical Vapor Transport (CVT) Method for Radiation Detection.

The heavy metal selenophosphate Pb2P2Se6emerges as a promising room-temperature X-ray/γ-ray detectors due to its high resistivity, robust radiation-blocking capability, and outstanding carrier mobility-lifetime product, etc. However, the high activity of phosphides poses significant impediment to the synthesis and single crystal growth. In this work, we have prepared high-quality Pb2P2Se6 single crystals with using the chemical vapor transport (CVT) method. The XRD analysis combined with EDS result confirmed the uniform composition of the resulting as-grown single crystals, while UV-Vis-NIR transmittance spectra revealed the bandgap of 1.89 eV. Selected area electron diffraction patterns indicated the crystal belonged to the P21/c(14) space group. Additionally, the Au/Pb2P2Se6/Au device is fabricated, which exhibits a robust X-ray response with a sensitivity of 648.61 µC·Gy-1·cm-2 at 400 V·mm-1 under 50 kVp. Notably, the device also excels in alpha particle detection, boasting a resolution of ~14.48% under a bias of 400 V bias. The hole mobility-lifetime product (µτ)h of Pb2P2Se6 is estimated to be ~2.58×10-5 cm2·V-1. The results underscore potential applications of Pb2P2Se6 crystal is in the field of the semiconductor radiation detectors.

Reduced trap-density and boosted performance of CH3NH3PbI3solar cells by 1-Pentanethiol enhanced anti-solvent washing route.

Performance and the stability of the perovskite-based photovoltaic devices are directly linked to existing trap-states or defect profiles at the surface and/or in the bulk of perovskite layers. Hence identification of stemming the defects during perovskite formation is crucial for achieving superior and long-lasting performances. Here, we present the effect of 1-Pentanethiol incorporation into the one-step deposition of perovskite layers. A feasible glove box-free route results in high-quality CH3NH3PbI3layers under highly humid conditions (RH > 50%) but at low temperatures (T< 18 °C). 1-Pentanethiol addition into the washing solvent leads to the refinement of I/Pb stoichiometry, elimination of the iodide deficiencies, and reduction of the trap-state densities. Consequently, a precise amount 1-Pentanethiol addition enhances photovoltaic performances, resulting in a 54% PCE improvement for CH3NH3PbI3-based inverted solar cells.

Highly Selective Ratiometric Sensors for Pb2+ Based on Luminescent Zn(II)-Coordination Polymers with Thiophenedicarboxylate. Crystal Structures and Spectroscopic Studies.

The development of luminescent coordination polymers for the selective sensing of Pb2+ in water constitutes an active area of research that impacts analytical, environmental, and inorganic chemistry. Herein, two novel water-stable 2D Zn-coordination polymers {[Zn2(H2O)2(tdc)2(bpy)]·(H2O)}n 1 and [Zn(tdc)(tmb)]n 2 (tdc = thiophenedicarboxylate; bpy = 4,4'-bipyridine and tmb = 4,4'-trimethylenebipyridine) were synthesized, structurally determined by single crystal X-ray diffraction, and studied in-depth as luminescent sensors for a series of cations (Ca2+, Mg2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+ Cd2+, Hg2+ and Pb2+) in 20% aqueous ethanol. These Zn-polymers possess photostability in 20% aqueous ethanol with a strong emission at 410 upon excitation at 330 nm and quantum yields of around Φ = 0.09. Under these conditions, Pb+2 can be efficiently sensed with polymer 2 through a fluorescent ratiometric response with selectivity over common interfering metal ions such as Cu2+, Cd2+ and Hg2+ in the micromolar concentration range (detection limit = 1.78 ± 10 µM). Such selectivity/affinity of Pb2+ over Hg2+ for luminescent chemosensors is still rare. On the basis of spectroscopic tools (1H NMR, far ATR-IR, PXRD), the X-ray crystal structure of 2, and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopic analysis, the ratiometric fluorescent response is proposed via an efficient metal-ion exchange driven through interactions between thiophenedicarboxylate rings and Pb2+ ions. The use of flexible luminescent Zn-coordination polymers as sensors for selective and direct detection of Pb2+ in aqueous media has been unexplored until now.

Identification of B-cell epitopes located on the surface in the PB2 protein of the H9N2 subtype avian influenza virus.

Avian influenza (AI), caused by H9N2 subtype avian influenza virus (AIV), poses a serious threat to poultry farming and public health due to its transmissibility and pathogenicity. The PB2 protein is a major component of the viral RNA polymerase complex. It is of great importance to identify the antigenic determinants of the PB2 protein to explore the function of the PB2 protein. In this study, the PB2 sequence of H9N2 subtype AIV, from 1090 to 1689 bp, was cloned and expressed. The recombinant PB2 protein with cutting gel was used to immunize BALB/c mice. After cell fusion, the hybridoma cell lines secreting monoclonal antibodies (mAbs) targeting the PB2 protein were screened by indirect ELISA and western blotting, and the antigenic epitopes of mAbs were identified by constructing truncated overlapping fragments in the PB2 protein of H9N2 subtype AIV. The results showed that three hybridoma cell lines (4B7, 4D10, and 5H1) that stably secreted mAbs specific to the PB2 protein were screened; the heavy chain of 4B7 was IgG2α, those of 4D10 and 5H1 were IgG1, and all three mAbs had kappa light chain. Also, the minimum B-cell epitope recognized was 475LRGVRVSK482 and 528TITYSSPMMW537. Homology analysis showed that these two epitopes were conserved among the different subtypes of AIV strains and located on the surface of the PB2 protein. The above findings provide an experimental foundation for further investigation of the function of the PB2 protein and developing monoclonal antibody-based diagnostic kits.

Enhancing irrigation water quality efficiently with potassium feldspar-derived adsorbent: Heavy metal detoxification and nutrient augmentation.

The pollution of Pb2+ and Cd2+ in both irrigation water and soil, coupled with the scarcity of vital mineral nutrition, poses a significant hazard to the security and quality of agricultural products. An economical potassium feldspar-derived adsorbent (PFDA) was synthesized using potassium feldspar as the main raw material through ball milling-thermal activation technology to solve this problem. The synthesis process is cost-effective and the resulting adsorbent demonstrates high efficiency in removing Pb2+ and Cd2+ from water. The removal process is endothermic, spontaneous, and stochastic, and follows the quasi-second-order kinetics, intraparticle diffusion, and Langmuir model. The adsorption and elimination of Pb2+ and Cd2+ is largely dependent on monolayer chemical sorption. The maximum removal capacity of PFDA for Pb2+ and Cd2+ at room temperature is 417 and 56.3 mg·g-1, respectively, which is superior to most mineral-based adsorbents. The desorption of Pb2+/Cd2+ on PFDA is highly challenging at pH≥3, whereas PFDA and Pb2+/Cd2+ are recyclable at pH≤0.5. When Pb2+ and Cd2+ coexisted, Pb2+ was preferentially removed by PFDA. In the case of single adsorption, Pb2+ was mainly adsorbed onto PFDA as Pb2SiO4, PbSiO3·xH2O, Pb3SiO5, PbAl2O4, PbAl2SiO6, PbAl2Si2O8, Pb2SO5, and PbSO4, whereas Cd2+ was primarily adsorbed as CdSiO3, Cd2SiO4, and Cd3Al2Si3O12. After the complex adsorption, the main products were PbSiO3·xH2O, PbAl2Si2O8, Pb2SiO4, Pb4Al2Si2O11, Pb5SiO7, PbSO4, CdSiO3, and Cd3Al2Si3O12. The forms of mineral nutrients in single and complex adsorption were different. The main mechanisms by which PFDA removed Pb2+ and Cd2+ were chemical precipitation, complexation, electrostatic attraction, and ion exchange. In irrigation water, the elimination efficiencies of Pb2+ and Cd2+ by PFDA within 10 min were 96.0 % and 70.3 %, respectively, and the concentrations of K+, Si4+, Ca2+, and Mg2+ increased by 14.0 %, 12.4 %, 55.7 %, and 878 %, respectively, within 60 min. PFDA holds great potential to replace costly methods for treating heavy metal pollution and nutrient deficiency in irrigation water, offering a sustainable, cost-effective solution and paving a new way for the comprehensive utilization of potassium feldspar.

Label-free electrochemical aptasensor for ultrasensitive lead ion detection based on flower-like AuNPs@MoS2 and core-shell Pt@Pd bimetallic nanoparticles.

A signal-amplified platform was designed to construct a label-free electrochemical aptasensor for lead ions (Pb2+) assay. First, flower-like molybdenum disulfide-supported AuNPs (AuNPs@MoS2) nanocomposites were synthesized and used as substrates for modifying the electrode. The AuNPs@MoS2 material possessed large surface area and superior biocompatibility, which was beneficial to improve the loading amount of the complementary DNA (cDNA) and amplified the response signal. Importantly, the prepared core-shell Pt@Pd bimetallic nanoparticles (Pt@PdNPs) were used to conjugate with redox marker thionine (Thi) and aptamer (Apt) for further signal amplification; the obtained signal probes (Thi-Pt@PdNPs-Apt) were connected by the cDNA assembled on the electrode through DNA hybridization. Differential pulse voltammetry was performed to monitor the signal of Thi. After incubating of aptasensor with Pb2+, the specific recognition of Pb2+ and Apt resulted in the dissociation of aptamer-cDNA complex, thereby the Thi-Pt@PdNPs-Apt separated from the electrode surface and decreased current response was obtained. The prepared electrochemical sensor exhibited linear response to Pb2+ in the range 5.0 × 10-4-100 nM and a detection limit of 1.0 × 10-4 nM was achieved. The sensor was applied to the determination of Pb2+ in actual sample with high sensitivity and accuracy, demonstrating potential applications in heavy metal monitoring.

Efficient extraction performance and mechanisms of Cd2+ and Pb2+ in water by novel dicationic ionic liquids.

Ten novel hydrophobic dicationic ionic liquids (DILs) were synthesized and applied for the extraction of heavy metals in aqueous solutions. Their physicochemical properties were measured at ambient temperature, and the leaching behaviors of the as-prepared DILs in water were assessed by TOC analysis. Metal extraction experiments were carried out to evaluate the extraction performances of the DILs. It was found that the extraction rates of up to 0.45 and 0.53 mg·(g·min)-1 were achieved with 100 mg DILs for 5 mL of 5 mg/L Cd2+ and Pb2+ solutions. Besides, the extraction efficiencies of Cd2+ and Pb2+ were respectively up to 95.48% and 98.46%, when the volumes of the simulated wastewater were expanded by a factor of 20 at a constant extraction phase ratio (1000 mg DILs for 50 mL of 5 mg/L Cd2+ or Pb2+ solutions). The reusability of the novel DILs was successfully proved by the back-extraction experiments with 0.5 M HNO3. Finally, taking Cd2+ extraction as an example, the extraction mechanism based on FTIR analysis and quantum chemical calculations showed that both S and O atoms in the anions of DILs had physical and quasi-chemical interactions with Cd2+, which were stronger than the electrostatic attraction.

An environmentally friendly strategy for reducing the environmental risks of heavy metals adsorbed by kaolinite.

Plenty of heavy metals (HMs) that are adsorbed on clay minerals (such as kaolinite), in addition to low molecular-weight organic acids (such as oxalic acid (OA)) with high activities, are widespread in the natural environment. In the present study, the effects of OA on the environmental behaviors of Pb2+/Cd2+ adsorbed by kaolinite have been investigated. The effectiveness and mechanisms of calcium silicate (CS) and magnesium silicate (MS) in reducing the environmental risks of the HMs have also been studied. The results showed that the releases of Pb2+/Cd2+ increased with an increasing concentration of OA. When different dosages of CS/MS were added to the aging system, a redistribution of HMs took place and the free form of Pb2+/Cd2+ decreased to very low levels. Also, the unextractable Pb2+/Cd2+ increased to high levels. Furthermore, a series of characterizations showed that the released HMs were re-captured by the CS/MS. In addition, the CS immobilized the OA in the solution during the aging process, which also facilitated an immobilization of the carbon element in the environment. In general, the present study has contributed to a further understanding of the transport behaviors of the HMs in natural environments, and of the interactions between CS (or MS), the environmental media, and the heavy metal contaminants. In addition, this study has also provided an eco-friendly strategy for an effective remediation of heavy metal pollution.

Fluorescence Detection of Pb2+ in Environmental Water Using Biomass Carbon Quantum Dots Modified with Acetamide-Glycolic Acid Deep Eutectic Solvent.

In this study, a novel green fluorescent probe material, nitrogen-doped carbon quantum dots (N-CQDs), was prepared by a one-step hydrothermal synthesis method using walnut green skin as a carbon source and acetamide-glycolic acid deep eutectic solvent (AGADES) as a modifier. By covalent coupling, the amide chromophore in AGADES is designed to cover the surface of walnut green skin carbon quantum dots (W-CQDs), forming a fluorescence energy resonance effect and improving the fluorescence performance of the carbon quantum dots. The prepared N-CQDs have a uniform particle size distribution, and the fluorescence quantum efficiency has increased from 12.5% to 32.5%. Within the concentration range of 0.01~1000 µmol/L of Pb2+, the linear detection limit is 1.55 nmol/L, which can meet the trace detection of Pb2+ in the water environment, and the recycling rate reaches 97%. This method has been successfully applied to the fluorescence detection and reuse of Pb2+ in actual water bodies, providing new ideas and methods for the detection of heavy metal ions in environmental water.

Discovery of a potent inhibitor targeting the cap-binding domain of the PB2 subunit of influenza RNA-dependent RNA polymerase.

Influenza pandemics have emerged as a significant global public health and security concern. PB2, a crucial subunit of the influenza RNA-dependent RNA polymerase (RdRP), has been identified as a promising target for influenza treatment. We herein report the discovery of a potent novel PB2 inhibitor, 7-51A, with a KD value of 1.64 nM as determined by ITC. The high activity of 7-51A was elucidated by the co-crystal structure of the PB2-7-51A complex, and comparative analysis revealed unique interactions that had never been observed before. The preliminary pharmacological evaluation indicated that 7-51A exhibited commendable cellular safety, hepatic microsomal metabolic safety and stability. Collectively, 7-51A was found to be an effective PB2 inhibitor and could be used as a lead compound for further studies.

Suppressed Voltage Deficit and Degradation of Perovskite Solar Cells by Regulating the Mineralization of Lead Iodide.

Both the uncoordinated Pb2+ and excess PbI2 in perovskite film will create defects and perturb carrier collection, thus leading to the open-circuit voltage (VOC ) loss and inducing rapid performance degradation of perovskite solar cells (PSCs). Herein, an additive of 3-aminothiophene-2-carboxamide (3-AzTca) that contains amide and amino and features a large molecular size is introduced to improve the quality of perovskite film. The interplay of size effect and adequate bonding strength between 3-AzTca and uncoordinated Pb2+ regulates the mineralization of PbI2 and generates low-dimensional PbI2 phase, thereby boosting the crystallization of perovskite. The decreased defect states result in suppressed nonradiative recombination and reduced VOC loss. The power conversion efficiency (PCE) of modified PSC is improved to 22.79% with a high VOC of 1.22 V. Moreover, the decomposition of PbI2 and perovskite films is also retarded, yielding enhanced device stability. This study provides an effective method to minimize the concentration of uncoordinated Pb2+ and improve the PCE and stability of PSCs.

The C-Terminal Domains of the PB2 Subunit of the Influenza A Virus RNA Polymerase Directly Interact with Cellular GTPase Rab11a.

Influenza A virus (IAV) contains a segmented RNA genome that is transcribed and replicated by the viral RNA polymerase in the cell nucleus. Replicated RNA segments are assembled with viral polymerase and oligomeric nucleoprotein into viral ribonucleoprotein (vRNP) complexes which are exported from the nucleus and transported across the cytoplasm to be packaged into progeny virions. Host GTPase Rab11a associated with recycling endosomes is believed to contribute to this process by mediating the cytoplasmic transport of vRNPs. However, how vRNPs interact with Rab11a remains poorly understood. In this study, we utilized a combination of biochemical, proteomic, and biophysical approaches to characterize the interaction between the viral polymerase and Rab11a. Using pulldown assays, we showed that vRNPs but not complementary RNPs (cRNPs) from infected cell lysates bind to Rab11a. We also showed that the viral polymerase directly interacts with Rab11a and that the C-terminal two-thirds of the PB2 polymerase subunit (PB2-C) comprising the cap-binding, mid-link, 627, and nuclear localization signal (NLS) domains mediate this interaction. Small-angle X-ray scattering (SAXS) experiments confirmed that PB2-C associates with Rab11a in solution forming a compact folded complex with a 1:1 stoichiometry. Furthermore, we demonstrate that the switch I region of Rab11a, which has been shown to be important for binding Rab11 family-interacting proteins (Rab11-FIPs), is also important for PB2-C binding, suggesting that IAV polymerase and Rab11-FIPs compete for the same binding site. Our findings expand our understanding of the interaction between the IAV polymerase and Rab11a in the cytoplasmic transport of vRNPs. IMPORTANCE The influenza virus RNA genome segments are replicated in the cell nucleus and are assembled into viral ribonucleoprotein (vRNP) complexes with viral RNA polymerase and nucleoprotein (NP). Replicated vRNPs need to be exported from the nucleus and trafficked across the cytoplasm to the cell membrane, where virion assembly takes place. The host GTPase Rab11a plays a role in vRNP trafficking. In this study, we showed that the viral polymerase directly interacts with Rab11a mediating the interaction between vRNPs and Rab11a. We mapped this interaction to the C-terminal domains of the PB2 polymerase subunit and the switch I region of Rab11a. Identifying the exact site of Rab11a binding on the viral polymerase could uncover a novel target site for the development of an influenza antiviral drug.

G Protein Subunit ß1 Facilitates Influenza A Virus Replication by Promoting the Nuclear Import of PB2.

G protein subunit ß1 (GNB1), the beta subunit of the G protein family, plays an important role in regulating transmembrane signal transduction. Although a recent study has demonstrated that GNB1 can bind the matrix protein 1 (M1) to facilitate M1 transport to budding sites and promote the release of progeny influenza A virus (IAV), whether the GNB1 protein has other functions in IAV replication requires further study. Here, we found that GNB1 promoted IAV replication, as virus yield decreased in GNB1 knockdown or knockout cells. GNB1 interacted with polymerase subunits PB2, PB1, and PA. Overexpressed GNB1 facilitated PB2 binding to importin α3, α5, and α7 promoting the nuclear import of PB2, enhancing viral RNA synthesis and polymerase activity. Altogether, our results demonstrated that GNB1 positively regulates virus replication by interacting with polymerase subunits and facilitating the nuclear import of PB2, which provide novel insights into the molecular mechanism of IAV. IMPORTANCE Until now, there has been only one article on the role of GNB1 in IAV budding. No study has investigated the role of GNB1 in IAV replication. In this study, our research demonstrated that GNB1 could increase the interaction between PB2 and the importin α isoform and mediate the nuclear import of PB2. Therefore, GNB1 could promote viral replication and transcription. Our results provide a better understanding of the molecular mechanisms of viral replication and provide potential antiviral drug targets.

Proliferating cell nuclear antigen impairs the nuclear import of influenza A virus PB2 and suppresses virus replication.

The genome of Influenza A virus (IAV) transcribes and replicates in the nucleus of cells and the viral ribonucleoprotein (vRNP) complex plays an important role in viral replication. As a major component of the vRNP complex, the polymerase basic protein 2 (PB2) is translocated to the nucleus via its nuclear localization signals mediated by the importins. Herein, it was identified proliferating cell nuclear antigen (PCNA) as an inhibitor of nuclear import of PB2 and subsequent viral replication. Mechanically, PCNA interacted with PB2 and inhibited the nuclear import of PB2. Furthermore, PCNA decreased the binding efficiency of PB2 with importin alpha (importin α) and the K738, K752, and R755 of PB2 were identified as the key sites binding with PCNA and importin α. Furthermore, PCNA was demonstrated to retrain the vRNP assembly and polymerase activity. Taken together, the results demonstrated that PCNA impaired the nuclear import of PB2, vRNP assembly and polymerase activity, which negatively regulated virus replication.

Protein arginine methyltransferase 5 mediates arginine symmetric dimethylation of influenza A virus PB2 and supports viral replication.

Influenza A virus (IAV) relies on intricate and highly coordinated associations with host factors for efficient replication and transmission. Characterization of such factors holds great significance for development of anti-IAV drugs. Our study identified protein arginine methyltransferase 5 (PRMT5) as a novel host factor indispensable for IAV replication. Silencing PRMT5 resulted in drastic repression of IAV replication. Our findings revealed that PRMT5 interacts with each protein component of viral ribonucleoproteins (vRNPs) and promotes arginine symmetric dimethylation of polymerase basic 2 (PB2). Overexpression of PRMT5 enhanced viral polymerase activity in a dose-dependent manner, emphasizing its role in genome transcription and replication of IAV. Moreover, analysis of PB2 protein sequences across various subtypes of IAVs demonstrated the high conservation of potential RG motifs recognized by PRMT5. Overall, our study suggests that PRMT5 supports IAV replication by facilitating viral polymerase activity by interacting with PB2 and promoting its arginine symmetric dimethylation. This study deepens our understanding of how IAV manipulates host factors to facilitate its replication and highlights the great potential of PRMT5 to serve as an anti-IAV therapeutic target.

Label-free colorimetric sensor for Pb2+ determination using catalytic activity of MnO2 nanoflowers and elongated aptamer.

In this study, a label-free aptasensor utilizing colorimetric properties was developed to detect Pb2+ with high sensitivity. The approach involved applying modified aptamer which enhanced the oxidase-mimicking activity of MnO2 nanoflowers. This innovative method provides an efficient means for monitoring Pb2+ ions without requiring any labeling techniques. The fundamental principle of this aptasensor is based on the adsorption of a modified aptamer onto MnO2 nanoflowers' surface, which in turn increases their affinity for chromogenic substrates and enhances their catalytic activity. The proposed aptasensor exploits the high sensitivity due to the extension of the aptamer sequence length by terminal deoxynucleotidyl transferase (TdT). Under optimum experimental conditions, the developed colorimetric aptasensor indicated a linear detection range from 4 to 80 nM with a limit of detection (LOD) of 1.4 nM. Moreover, the aptasensor successfully monitored Pb2+ in the drinking water, milk and human serum samples. Henceforth, the colorimetric aptasensor exhibited in this study possesses several benefits such as uncomplicated operation, cost-effectiveness, label-free detection and remarkable sensitivity. Thus rendering it a suitable option for analyzing intricate samples.

Electroactive poly(thionine) as imprinted polymer and reference probe simultaneously for ratiometric ion imprinted electrochemical Pb2+sensor.

In this work, an electrochemical sensor based on ion-imprinted polymer/Au nanoparticles/porous biochar (IIP/AuNPs/PBC) composite was proposed for the highly selective and sensitive detection of Pb2+. In this work, poly (thionine) (pTHI) served simultaneously as imprinted polymer and reference probe. It could not only realize the specific detection of Pb2+, but also provide an internal reference signal to eliminate the influence of human and environmental factors on the detection signal and further improve the stability of the sensor. In addition, the AuNPs/PBC composite with large specific surface area, excellent electron transport and electrocatalytic performance could effectively enhance the detection signal as a carrier material. At the same time, the AuNPs on the PBC surface would promote the formation of uniform and stable IIP through Au-S bonds. The synergistic effect between IIP, AuNPs/PBC and ratiometric signal mode gave the Pb2+sensor excellent performance, including a wide linear range (0.1-1000µg l-1), low detection limit (0.03µg l-1, S/N = 3), excellent selectivity and stability. All these results indicate that the proposed sensor could provide a meaningful reference for highly selective detection of heavy metal ions (HMIs).

CdS Semiconductor Quantum Dots; Facile Synthesis, Application as Off Fluorescent Sensor for Detection of Lead (Pb2+) Ions and Catalyst for Degradation of Dyes from Water.

The CdS quantum dots (QDs) were prepared by rapid, one-pot, and novel photochemical method, which used Thioglycolic acid (TGA) molecules as both stabilizer and sulfur source. The structure and morphology of the prepared CdS QDs were characterized by different analyses such as XRD, FT-IR, Raman, EDS, TEM, PL, and absorption. In this work, was used of CdS QDs as off fluorescence sensor for rapid and simple detection of lead (Pb2+) ions in water. The PL intensity of CdS QDs in the presence of lead ions decreased gradually and in the presence of 100 µM lead ions, photo emission completely quenched. The photocatalyst performance of CdS QDs was investigated by methylene blue (MB), methylene orange (MO), and rhodamine b (RB) pollutant dyes under both UV and sun lights. The obtained results showed that CdS QDs had excellent photocatalyst activity with dyes under UV light and 94.9% of MO dye, 94.4% of RB dye, and 81.2% of MB was degraded after 60 min UV irradiation. For understanding about which parameter have a key role in the photodegradation process of MO by CdS QDs under UV illumination, several radical scavengers were used, and results showed that holes have a key role in the degradation process.

The Development of the Fluorescence-based Portable Device for Lead (II) and Formalin Determination in Food Samples by Using Nitrogen-Doped Carbon Dots (N-CDs).

The fluorescence-based portable device for the determination of lead (Pb2+) and formalin (FA) in food samples by using Nitrogen-doped carbon dots (N-CDs) as a fluorescence probe was developed. The proposed approach, Pb2+, and FA were determined based on the photo-induced electron transfer (PET) mechanism and the silver mirror reaction. The fluorescence intensity of the N-CDs decreased with the increase of Pb2+ concentration and increased with the increasing FA concentration. The fluorescence intensity of N-CDs after the reactions were measured by a filter-free fluorometer platform using a commercial camera module and a Raspberry Pi, a compact computer, as a detector and processor. The experimental results were obtained using control samples with known Pb2+ and FA concentrations in the 0.01-10 mg L- 1 and 25-150 mg L- 1, respectively. The proposed approach is simple, low-cost, and accurate for the on-site monitoring of Pb2+ and FA in various food samples. Of utmost importance, the proposed approach is expected to be a pioneering model for the future development of other analytes with a broad range of practical applications.