Quality Control of ER Membrane Proteins by the RNF185/Membralin Ubiquitin Ligase Complex.

Misfolded proteins in the endoplasmic reticulum (ER) are degraded by ER-associated degradation (ERAD). Although ERAD components involved in degradation of luminal substrates are well characterized, much less is known about quality control of membrane proteins. Here, we analyzed the degradation pathways of two short-lived ER membrane model proteins in mammalian cells. Using a CRISPR-Cas9 genome-wide library screen, we identified an ERAD branch required for quality control of a subset of membrane proteins. Using biochemical and mass spectrometry approaches, we showed that this ERAD branch is defined by an ER membrane complex consisting of the ubiquitin ligase RNF185, the ubiquitin-like domain containing proteins TMUB1/2 and TMEM259/Membralin, a poorly characterized protein. This complex cooperates with cytosolic ubiquitin ligase UBE3C and p97 ATPase in degrading their membrane substrates. Our data reveal that ERAD branches have remarkable specificity for their membrane substrates, suggesting that multiple, perhaps combinatorial, determinants are involved in substrate selection.

Enhanced Path Planning and Obstacle Avoidance Based on High-Precision Mapping and Positioning.

High-precision positioning and multi-target detection have been proposed as key technologies for robotic path planning and obstacle avoidance. First, the Cartographer algorithm was used to generate high-quality maps. Then, the iterative nearest point (ICP) and the occupation probability algorithms were combined to scan and match the local point cloud, and the positions and attitudes of the robot were obtained. Furthermore, Sparse Matrix Pose Optimization was carried out to improve the positioning accuracy. The positioning accuracy of the robot in x and y directions was kept within 5 cm, the angle error was controlled within 2°, and the positioning time was reduced by 40%. An improved timing elastic band (TEB) algorithm was proposed to guide the robot to move safely and smoothly. A critical factor was introduced to adjust the distance between the waypoints and the obstacle, generating a safer trajectory, and increasing the constraint of acceleration and end speed; thus, smooth navigation of the robot to the target point was achieved. The experimental results showed that, in the case of multiple obstacles being present, the robot could choose the path with fewer obstacles, and the robot moved smoothly when facing turns and approaching the target point by reducing its overshoot. The proposed mapping, positioning, and improved TEB algorithms were effective for high-precision positioning and efficient multi-target detection.

An Improved Timed Elastic Band (TEB) Algorithm of Autonomous Ground Vehicle (AGV) in Complex Environment.

In recent decades, the Timed Elastic Band (TEB) algorithm is widely used for the AGV local path panning because of its convenient and efficiency. However, it may make a local detour when encountering a curve turn and cause excessive energy consumption. To solve this problem, this paper proposed an improved TEB algorithm to make the AGV walk along the wall when turning, which shortens the planning time and saves energy. Experiments were implemented in the Rviz visualization tool platform of the robot operating system (ROS). Simulated experiment results reflect that an amount of 5% reduction in the planning time has been achieved and the velocity curve implies that the operation was relatively smooth. Practical experiment results demonstrate the effectiveness and feasibility of the proposed method that the robots can avoid obstacles smoothly in the unknown static and dynamic obstacle environment.

Two-Dimensional TeB Structures with Anisotropic Carrier Mobility and Tunable Bandgap.

Two-dimensional (2D) semiconductors with desirable bandgaps and high carrier mobility have great potential in electronic and optoelectronic applications. In this work, we proposed α-TeB and ß-TeB monolayers using density functional theory (DFT) combined with the particle swarm-intelligent global structure search method. The high dynamical and thermal stabilities of two TeB structures indicate high feasibility for experimental synthesis. The electronic structure calculations show that the two structures are indirect bandgap semiconductors with bandgaps of 2.3 and 2.1 eV, respectively. The hole mobility of the ß-TeB sheet is up to 6.90 × 102 cm2 V-1 s-1. By reconstructing the two structures, we identified two new horizontal and lateral heterostructures, and the lateral heterostructure presents a direct band gap, indicating more probable applications could be further explored for TeB sheets.

Cholesterol increases protein levels of the E3 ligase MARCH6 and thereby stimulates protein degradation.

The E3 ligase membrane-associated ring-CH-type finger 6 (MARCH6) is a polytopic enzyme bound to the membranes of the endoplasmic reticulum. It controls levels of several known protein substrates, including a key enzyme in cholesterol synthesis, squalene monooxygenase. However, beyond its own autodegradation, little is known about how MARCH6 itself is regulated. Using CRISPR/Cas9 gene-editing, MARCH6 overexpression, and immunoblotting, we found here that cholesterol stabilizes MARCH6 protein endogenously and in HEK293 cells that stably express MARCH6. Conversely, MARCH6-deficient HEK293 and HeLa cells lost their ability to degrade squalene monooxygenase in a cholesterol-dependent manner. The ability of cholesterol to boost MARCH6 did not seem to involve a putative sterol-sensing domain in this E3 ligase, but was abolished when either membrane extraction by valosin-containing protein (VCP/p97) or proteasomal degradation was inhibited. Furthermore, cholesterol-mediated stabilization was absent in two MARCH6 mutants that are unable to degrade themselves, indicating that cholesterol stabilizes MARCH6 protein by preventing its autodegradation. Experiments with chemical chaperones suggested that this likely occurs through a conformational change in MARCH6 upon cholesterol addition. Moreover, cholesterol reduced the levels of at least three known MARCH6 substrates, indicating that cholesterol-mediated MARCH6 stabilization increases its activity. Our findings highlight an important new role for cholesterol in controlling levels of proteins, extending the known repertoire of cholesterol homeostasis players.

Seed size evolution and biogeography of Plukenetia (Euphorbiaceae), a pantropical genus with traditionally cultivated oilseed species.

BACKGROUND: Plukenetia is a small pantropical genus of lianas and vines with variably sized edible oil-rich seeds that presents an ideal system to investigate neotropical and pantropical diversification patterns and seed size evolution. We assessed the biogeography and seed evolution of Plukenetia through phylogenetic analyses of a 5069 character molecular dataset comprising five nuclear and two plastid markers for 86 terminals in subtribe Plukenetiinae (representing 20 of ~ 23 Plukenetia species). Two nuclear genes, KEA1 and TEB, were used for phylogenetic reconstruction for the first time. Our goals were: (1) produce a robust, time-dependent evolutionary framework for Plukenetia using BEAST; (2) reconstruct its biogeographical history with ancestral range estimation in BIOGEOBEARS; (3) define seed size categories; (4) identify patterns of seed size evolution using ancestral state estimation; and (5) conduct regression analyses with putative drivers of seed size using the threshold model. RESULTS: Plukenetia was resolved into two major groups, which we refer to as the pinnately- and palmately-veined clades. Our analyses suggest Plukenetia originated in the Amazon or Atlantic Forest of Brazil during the Oligocene (28.7 Mya) and migrated/dispersed between those regions and Central America/Mexico throughout the Miocene. Trans-oceanic dispersals explain the pantropical distribution of Plukenetia, including from the Amazon to Africa in the Early Miocene (17.4 Mya), followed by Africa to Madagascar and Africa to Southeast Asia in the Late Miocene (9.4 Mya) and Pliocene (4.5 Mya), respectively. We infer a single origin of large seeds in the ancestor of Plukenetia. Seed size fits a Brownian motion model of trait evolution and is moderately to strongly associated with plant size, fruit type/dispersal syndrome, and seedling ecology. Biome shifts were not drivers of seed size, although there was a weak association with a transition to fire prone semi-arid savannas. CONCLUSIONS: The major relationships among the species of Plukenetia are now well-resolved. Our biogeographical analyses support growing evidence that many pantropical distributions developed by periodic trans-oceanic dispersals throughout the Miocene and Pliocene. Selection on a combination of traits contributed to seed size variation, while movement between forest edge/light gap and canopy niches likely contributed to the seed size extremes in Plukenetia.

IL-8 Enhances Therapeutic Effects of BMSCs on Bone Regeneration via CXCR2-Mediated PI3k/Akt Signaling Pathway.

BACKGROUND/AIMS: Tissue engineering bone transplantation with bone marrow mesenchymal stem cells (BMSCs) is an effective technology to treat massive bone loss, while molecular regulation of the bone regeneration processes remains poorly understood. Here, we aimed to assess the role of interleukin-8 (IL-8) in the recruitment of host cells by seeded BMSCs and in the bone regeneration. METHODS: A transwell assay was performed to examine the role of IL-8/CXCR1/CXCR2/PI3k/Akt on the migration potential of hBMSCs. The in vitro chondrogenic differentiation of hBMSCs was assessed by examination of 2 chondrogenic markers, Sox9 and type 2 collagen (COL2). mBMSCs were used in tissue engineered bone (TEB) with/without IL-8 implanted into bone defect area with CXCR2 or Akt inhibitors. Density and Masson staining of the regenerated bone were assessed. The chondrogenesis was assessed by expression levels of associated proteins, Sox9 and COL2, by RT-qPCR and by immunohistochemistry. RESULTS: IL-8 may trigger in vitro migration of hBMSCs via CXCR2-mediated PI3k/Akt signaling pathway. IL-8 enhances osteogenesis in the TEB-implanted bone defect in mice. IL-8 induces chondrogenic differentiation of hBMSCs via CXCR2-mediated PI3k/Akt signaling pathway in vitro and in vivo. CONCLUSIONS: IL-8 enhances therapeutic effects of MSCs on bone regeneration via CXCR2-mediated PI3k/Akt signaling pathway.

A Conserved C-terminal Element in the Yeast Doa10 and Human MARCH6 Ubiquitin Ligases Required for Selective Substrate Degradation.

Specific proteins are modified by ubiquitin at the endoplasmic reticulum (ER) and are degraded by the proteasome, a process referred to as ER-associated protein degradation. In Saccharomyces cerevisiae, two principal ER-associated protein degradation ubiquitin ligases (E3s) reside in the ER membrane, Doa10 and Hrd1. The membrane-embedded Doa10 functions in the degradation of substrates in the ER membrane, nuclear envelope, cytoplasm, and nucleoplasm. How most E3 ligases, including Doa10, recognize their protein substrates remains poorly understood. Here we describe a previously unappreciated but highly conserved C-terminal element (CTE) in Doa10; this cytosolically disposed 16-residue motif follows the final transmembrane helix. A conserved CTE asparagine residue is required for ubiquitylation and degradation of a subset of Doa10 substrates. Such selectivity suggests that the Doa10 CTE is involved in substrate discrimination and not general ligase function. Functional conservation of the CTE was investigated in the human ortholog of Doa10, MARCH6 (TEB4), by analyzing MARCH6 autoregulation of its own degradation. Mutation of the conserved Asn residue (N890A) in the MARCH6 CTE stabilized the normally short lived enzyme to the same degree as a catalytically inactivating mutation (C9A). We also report the localization of endogenous MARCH6 to the ER using epitope tagging of the genomic MARCH6 locus by clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9-mediated genome editing. These localization and CTE analyses support the inference that MARCH6 and Doa10 are functionally similar. Moreover, our results with the yeast enzyme suggest that the CTE is involved in the recognition and/or ubiquitylation of specific protein substrates.

Noise Characterization and Performance of MODIS Thermal Emissive Bands.

The MODerate-resolution Imaging Spectroradiometer (MODIS) is a premier Earth observing sensor of the early 21st Century, flying on-board the Terra (T) and Aqua (A) spacecrafts. Both instruments far exceeded their 6 year design life and continue to operate satisfactorily for more than 15 and 13 years, respectively. The MODIS instrument is designed to make observations at nearly a 100% duty cycle covering the entire Earth in less than 2 days. The MODIS sensor characteristics include a spectral coverage from 0.41 µm - 14.4 µm, of which those wavelengths ranging from 3.7 µm - 14. 4 µm cover the thermal infrared region which is interspaced in 16 Thermal Emissive Bands (TEB). Each of the TEB contains 10 detectors which record samples at a spatial resolution of 1 km. In order to ensure a high level of accuracy for the TEB measured Top Of Atmosphere (TOA) radiances, an onboard BlackBody (BB) is used as the calibration source. This paper reports the noise characterization and performance of the TEB on various counts. First, the stability of the onboard BB is evaluated to understand the effectiveness of the calibration source. Next, key noise metrics such as the Noise Equivalent Temperature difference (NEdT) and the Noise Equivalent dn difference (NEdN) for the various TEB are determined from multiple temperature sources. These sources include the nominally controlled BB temperature of 290 K for T-MODIS and 285 K for A-MODIS, as well as a BB Warm Up - Cool Down (WUCD) cycle that is performed over a temperature range from roughly 270 K - 315 K. The Space View (SV) port that measures the background signal serves as a viable cold temperature source for measuring noise. In addition, a well characterized Earth View (EV) Target, the Dome C site located in the Antarctic plateau, is used for characterizing the stability of the sensor, indirectly providing a measure of the NEdN. Based on this rigorous characterization, a list of the noisy and inoperable detectors for the TEB for both instruments is reported to provide the science user communities quality control of the MODIS Level 1B calibrated product.

Route planning of mobile robot based on improved RRT star and TEB algorithm.

This paper presents a fusion algorithm based on the enhanced RRT* TEB algorithm. The enhanced RRT* algorithm is utilized for generating an optimal global path. Firstly, proposing an adaptive sampling function and extending node bias to accelerate global path generation and mitigate local optimality. Secondly, eliminating path redundancy to minimize path length. Thirdly, imposing constraints on the turning angle of the path to enhance path smoothness. Conducting kinematic modeling of the mobile robot and optimizing the TEB algorithm to align the trajectory with the mobile robot's kinematics. The integration of these two algorithms culminates in the development of a fusion algorithm. Simulation and experimental results demonstrate that, in contrast to the traditional RRT* algorithm, the enhanced RRT* algorithm achieves a 5.8% reduction in path length and a 62.5% decrease in the number of turning points. Utilizing the fusion algorithm for path planning, the mobile robot generates a superior, seamlessly smooth global path, adept at circumventing obstacles. Furthermore, the local trajectory meticulously conforms to the kinematic constraints of the mobile robot.

International assessment results on non-NIOSH approved respirators by the national personal protective technology laboratory (NPPTL): a data note.

OBJECTIVES: Due to the COVID-19 pandemic and the shortage of the National Institute for Occupational Safety & Health (NIOSH)-approved N95 respirators, the Food and Drug Administration granted an Emergency Use Authorization to allow the use of non-NIOSH approved respirators provided that these respirators must undergo tests by a protocol of TEB-APR-STP-0059, similar methods of NIOSH standard testing procedure. This initiative safeguards the quality of respirators and the effectiveness of occupational protection. The dataset of all the testing results could benefit further analysis of COVID-19 infection rates in relation to different types of N95 respirators used and identify potential correlations of various test parameters in the testing system for validation. The analysis enhances understanding of the quality, effectiveness, and performance of N95 respirators in the prevention of respiratory infectious transmission and develops improved occupational safety measures. DATA DESCRIPTION: The dataset was transformed, transcribed, and compiled from the official testing data of non-NIOSH-approved N95 respirators reported in the NIOSH website under the Centers for the Disease Control and Prevention in the United States. The dataset included details of 7,413 testing results of N95 respirators (manufacturer, model, and maximum and minimum filtration efficiency) and test parameters (flow rate, initial filter resistance, and initial percent leakage). Supplementary items were added to increase the availability of data analysis and enhance the interpretability of the assessments of the quality of N95 respirators.

3D bioprinting of in situ vascularized tissue engineered bone for repairing large segmental bone defects.

Large bone defects remain an unsolved clinical challenge because of the lack of effective vascularization in newly formed bone tissue. 3D bioprinting is a fabrication technology with the potential to create vascularized bone grafts with biological activity for repairing bone defects. In this study, vascular endothelial cells laden with thermosensitive bio-ink were bioprinted in situ on the inner surfaces of interconnected tubular channels of bone mesenchymal stem cell-laden 3D-bioprinted scaffolds. Endothelial cells exhibited a more uniform distribution and greater seeding efficiency throughout the channels. In vitro, the in situ bioprinted endothelial cells can form a vascular network through proliferation and migration. The in situ vascularized tissue-engineered bone also resulted in a coupling effect between angiogenesis and osteogenesis. Moreover, RNA sequencing analysis revealed that the expression of genes related to osteogenesis and angiogenesis is upregulated in biological processes. The in vivo 3D-bioprinted in situ vascularized scaffolds exhibited excellent performance in promoting new bone formation in rat calvarial critical-sized defect models. Consequently, in situ vascularized tissue-engineered bones constructed using 3D bioprinting technology have a potential of being used as bone grafts for repairing large bone defects, with a possible clinical application in the future.

Engineered scaffolds based on mesenchymal stem cells/preosteoclasts extracellular matrix promote bone regeneration.

Recently, extracellular matrix-based tissue-engineered bone is a promising approach to repairing bone defects, and the seed cells are mostly mesenchymal stem cells. However, bone remodelling is a complex biological process, in which osteoclasts perform bone resorption and osteoblasts dominate bone formation. The interaction and coupling of these two kinds of cells is the key to bone repair. Therefore, the extracellular matrix secreted by the mesenchymal stem cells alone cannot mimic a complex bone regeneration microenvironment, and the addition of extracellular matrix by preosteoclasts may contribute as an effective strategy for bone regeneration. Here, we established the mesenchymal stem cell/preosteoclast extracellular matrix -based tissue-engineered bones and demonstrated that engineered-scaffolds based on mesenchymal stem cell/ preosteoclast extracellular matrix significantly enhanced osteogenesis in a 3 mm rat femur defect model compared with mesenchymal stem cell alone. The bioactive proteins released from the mesenchymal stem cell/ preosteoclast extracellular matrix based tissue-engineered bones also promoted the migration, adhesion, and osteogenic differentiation of mesenchymal stem cells in vitro. As for the mechanisms, the iTRAQ-labeled mass spectrometry was performed, and 608 differentially expressed proteins were found, including the IGFBP5 and CXCL12. Through in vitro studies, we proved that CXCL12 and IGFBP5 proteins, mainly released from the preosteoclasts, contributed to mesenchymal stem cells migration and osteogenic differentiation, respectively. Overall, our research, for the first time, introduce pre-osteoclast into the tissue engineering of bone and optimize the strategy of constructing extracellular matrix-based tissue-engineered bone using different cells to simulate the natural bone regeneration environment, which provides new sight for bone tissue engineering.

Recent developments in biomaterials for long-bone segmental defect reconstruction: A narrative overview.

Reconstruction of long-bone segmental defects (LBSDs) has been one of the biggest challenges in orthopaedics. Biomaterials for the reconstruction are required to be strong, osteoinductive, osteoconductive, and allowing for fast angiogenesis, without causing any immune rejection or disease transmission. There are four main types of biomaterials including autograft, allograft, artificial material, and tissue-engineered bone. Remarkable progress has been made in LBSD reconstruction biomaterials in the last ten years. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: Our aim is to summarize recent developments in the divided four biomaterials utilized in the LBSD reconstruction to provide the clinicians with new information and comprehension from the biomaterial point of view.

Synthetic Polymer Nanoparticles Functionalized with Different Ligands for Receptor-mediated Transcytosis across Blood-Brain Barrier.

Polymeric nanoparticles have been investigated as biocompatible and promising nano-carriers to deliver drugs across the blood-brain barrier (BBB). However, most of the polymeric nanoparticles cannot be observed without attaching them with fluorescent dyes. Generally complex synthesis process is required to attach fluorescent dye tracing molecules with drug carrier nanoparticles. In this paper, we synthesized a novel fluorescent polymer based on poly [Triphenylamine-4-vinyl-(P-methoxy-benzene)] (TEB). This polymer was prepared from TEB polymer through coprecipitation. Furthermore, three types of ligands, transferrin (TfR), lactoferrin (LfR) and lipoprotein (LRP), were covalently attached on the nanoparticle surface to improve the BBB transport efficiency. All of prepared TEB-based nanoparticles were biocompatible, exhibited excellent fluorescence properties and could be observed in vivo. The transcellular transportation of these TEB-based nanoparticles across the BBB was evaluated by observing the fluorescent intensity. The translocation study was performed in an in vitro BBB model that were constructed based on mouse cerebral endothelial cells (bEnd.3). The results showed that ligand-coated TEB nanoparticles can be transported across BBB with high efficiencies (up to 29.02%). This is the first time that the fluorescent TEB nanoparticles were applied as nano-carriers for transport across the BBB. Such fluorescent polymeric nanoparticles have the potential applications in brain imaging or drug delivery.

Pubertal Ductal Morphogenesis: Isolation and Transcriptome Analysis of the Terminal End Bud.

The terminal end bud (TEB) is the growing part of the ductal mammary epithelium during puberty, enabling the formation of a primary epithelial network. These highly proliferative bulbous end structures that drive the ductal expansion into the mammary fat pad comprise an outer cap cell layer, containing the progenitor cells of the ductal myoepithelium, and the body cells, which form the luminal epithelium. As TEB make up only a very small part of the whole mammary tissue, TEB-associated factors can be easily missed when whole-tissue sections are being analyzed. Here we describe a method to enzymatically separate TEB and ducts, respectively, from the surrounding stroma of pubertal mice in order to perform transcriptomic or proteomic analysis on the isolated structures and identify potential novel regulators of epithelial outgrowth, or to allow further cell culturing. This approach has previously allowed us to identify novel TEB-associated proteins, including several axonal guidance proteins. We further include protocols for the culturing of isolated TEB, processing of mammary tissue into paraffin and immunohistochemical/fluorescent staining for verification, and localization of protein expression in the mammary tissue at different developmental time points.

Multi-modal imaging for assessment of tissue-engineered bone in a critical-sized calvarial defect mouse model.

Tissue-engineered bone (TEB) analysis in vivo relies heavily on tissue histological and end-point evaluations requiring the sacrifice of animals at specific time points. Due to differences in animal response to implanted tissues, the conventional analytical methods to evaluate TEB can introduce data inconsistencies. Additionally, the conventional methods increase the number of animals required to provide an acceptable statistical power for hypothesis testing. Alternatively, our non-invasive optical imaging allows for the longitudinal analysis of regenerating tissue, where each animal acts as its own control, thus reducing overall animal numbers. In our 6 month feasibility study, TEB, consisting of a silk protein scaffold with or without differentiated mesenchymal stem cells, was implanted in a critical-sized calvarial defect mouse model. Osteogenesis of the TEB was monitored through signal variation, using magnetic resonance imaging (MRI) and near-infrared (NIR) optical imaging with IRDye® 800CW BoneTagTM (800CW BT, a bone-specific marker used to label osteogenically differentiated mesenchymal stem cells and mineralization). Histological endpoint measurements and computed tomography (CT) were used to confirm imaging findings. Anatomical MRI revealed decreased signal intensity, indicating mineralization, in the TEB compared to the control (i.e. silk scaffold only) at various growth stages. NIR optical imaging results demonstrated a signal intensity increase of the TEB compared to control. Interpretation of the imaging results were confirmed by histological analysis. Specifically, haematoxylin and eosin staining revealing de novo bone in TEB showed that 80% of the defect was covered by TEB, while only 40% was covered for the control. Taken together, these results demonstrate the potential of multi-modal non-invasive imaging to visualize and quantify TEB for the assessment of regenerative medicine strategies. Copyright © 2015 John Wiley & Sons, Ltd.

Process techniques for human thoracic electrical bio-impedance signal in remote healthcare systems.

Analysis of thoracic electrical bio-impedance (TEB) facilitates heart stroke volume in sudden cardiac arrest. This Letter proposes several efficient and computationally simplified adaptive algorithms to display high-resolution TEB component. In a clinical environment, TEB signal encounters with various physiological and non-physiological phenomenon, which masks the tiny features that are important in identifying the intensity of the stroke. Moreover, computational complexity is an important parameter in a modern wearable healthcare monitoring tool. Hence, in this Letter, the authors propose a new signal conditioning technique for TEB enhancement in remote healthcare systems. For this, the authors have chosen higher order adaptive filter as a basic element in the process of TEB. To improve filtering capability, convergence speed, to reduce computational complexity of the signal conditioning technique, the authors apply data normalisation and clipping the data regressor. The proposed implementations are tested on real TEB signals. Finally, simulation results confirm that proposed regressor clipped normalised higher order filter is suitable for a practical healthcare system.

CD151 represses mammary gland development by maintaining the niches of progenitor cells.

Tetraspanin CD151 interacts with laminin-binding integrins (i.e., α3ß1, α6ß1 and α6ß4) and other cell surface molecules to control diverse cellular and physiological processes, ranging from cell adhesion, migration and survival to tissue architecture and homeostasis. Here, we report a novel role of CD151 in maintaining the branching morphogenesis and activity of progenitor cells during the pubertal development of mammary glands. In contrast to the disruption of laminin-binding integrins, CD151 removal in mice enhanced the tertiary branching in mammary glands by 2.4-fold and the number of terminal end buds (TEBs) by 30%, while having minimal influence on either primary or secondary ductal branching. Consistent with these morphological changes are the skewed distribution of basal/myoepithelial cells and a 3.2-fold increase in proliferating Ki67-positive cells. These novel observations suggest that CD151 impacts the branching morphogenesis of mammary glands by upregulating the activities of bipotent progenitor cells. Indeed, our subsequent analyses indicate that upon CD151 removal the proportion of CD24(Hi)CD49f(Low) progenitor cells in the mammary gland increased by 34%, and their proliferating and differentiating activities were significantly upregulated. Importantly, fibronectin, a pro-branching extracellular matrix (ECM) protein deposited underlying mammary epithelial or progenitor cells, increased by >7.2-fold. Moreover, there was a concomitant increase in the expression and nuclear distribution of Slug, a transcription factor implicated in the maintenance of mammary progenitor cell activities. Taken together, our studies demonstrate that integrin-associated CD151 represses mammary branching morphogenesis by controlling progenitor cell activities, ECM integrity and transcription program.

Eph receptor and ephrin function in breast, gut, and skin epithelia.

Epithelial cells are tightly coupled together through specialized intercellular junctions, including adherens junctions, desmosomes, tight junctions, and gap junctions. A growing body of evidence suggests epithelial cells also directly exchange information at cell-cell contacts via the Eph family of receptor tyrosine kinases and their membrane-associated ephrin ligands. Ligand-dependent and -independent signaling via Eph receptors as well as reverse signaling through ephrins impact epithelial tissue homeostasis by organizing stem cell compartments and regulating cell proliferation, migration, adhesion, differentiation, and survival. This review focuses on breast, gut, and skin epithelia as representative examples for how Eph receptors and ephrins modulate diverse epithelial cell responses in a context-dependent manner. Abnormal Eph receptor and ephrin signaling is implicated in a variety of epithelial diseases raising the intriguing possibility that this cell-cell communication pathway can be therapeutically harnessed to normalize epithelial function in pathological settings like cancer or chronic inflammation.