Porous poly(bismaleimide-co-divinylbenzene) microspheres as dispersive solid-phase extraction adsorbent coupled to high-performance liquid chromatography for the determination of triazine herbicide residues in vegetable samples.

In this work, monodisperse and nano-porous poly(bismaleimide-co-divinylbenzene) microspheres with large specific surface area (427.6 m2 /g) and rich pore structure were prepared by one-pot self-stable precipitation polymerization of 2,2'-bis[4-(4-maleimidophenoxy) phenyl] propane and divinylbenzene. The prepared poly(bismaleimide-co-divinylbenzene) microspheres were employed as dispersive solid-phase extraction (DSPE) adsorbent for the extraction of triazine herbicides. Under optimized conditions, good linearities were obtained between the peak area and the concentration of triazine herbicides in the range of 1-400 µg/L (R2 ≥ 0.9987) with the limits of detection of 0.12-0.31 µg/L. Triazine herbicides were detected using the described approach in vegetable samples (i.e., cucumber, tomato, and maize) with recoveries of 93.6%-117.3% and relative standard deviations of 0.4%-3.5%. In addition, the recoveries of triazine herbicides remained above 80.7% after being used for nine DSPE cycles, showing excellent reusability of poly(bismaleimide-co-divinylbenzene) microspheres. The adsorption of poly(bismaleimide-co-divinylbenzene) microspheres toward triazine herbicides was a monolayer and chemical adsorption. The adsorption mechanism between triazine herbicides and adsorbents might be a combination of hydrogen bonding, electrostatic interaction, and π-π conjugation. The results confirmed the potential use of the poly(bismaleimide-co-divinylbenzene) microspheres-based DSPE coupled to the high-performance liquid chromatography method for the detection of triazine herbicide residues in vegetable samples.

Triazine Herbicides Risk Management Strategies on Environmental and Human Health Aspects Using In-Silico Methods.

As an effective herbicide, 1, 3, 5-Triazine herbicides (S-THs) are used widely in the pesticide market. However, due to their chemical properties, S-THs severely threaten the environment and human health (e.g., human lung cytotoxicity). In this study, molecular docking, Analytic Hierarchy Process-Technique for Order Preference by Similarity to the Ideal Solution (AHP-TOPSIS), and a three-dimensional quantitative structure-active relationship (3D-QSAR) model were used to design S-TH substitutes with high herbicidal functionality, high microbial degradability, and low human lung cytotoxicity. We discovered a substitute, Derivative-5, with excellent overall performance. Furthermore, Taguchi orthogonal experiments, full factorial design of experiments, and the molecular dynamics method were used to identify three chemicals (namely, the coexistence of aspartic acid, alanine, and glycine) that could promote the degradation of S-THs in maize cropping fields. Finally, density functional theory (DFT), Estimation Programs Interface (EPI), pharmacokinetic, and toxicokinetic methods were used to further verify the high microbial degradability, favorable aquatic environment, and human health friendliness of Derivative 5. This study provided a new direction for further optimizations of novel pesticide chemicals.

Using Magnetic Micelles Combined with Carbon Fiber Ionization Mass Spectrometry for the Screening of Trace Triazine Herbicides from Aqueous Samples.

Triazine herbicides are commonly used in agriculture to eliminate weeds. However, they can persist in the environment. In this study, we explored a new method for detecting triazine herbicides in aqueous samples. We selected two triazine herbicides, namely, prometryn and ametryn, as model herbicides. To generate magnetic probes, we mixed aqueous Gd3+ with aqueous sodium dodecyl sulfate (SDS), which created magnetic probes made of Gd3+-SDS micelles. These probes showed a trapping capacity for the model herbicides. Results indicated that the trapping capacities of our magnetic probes for ametryn and prometryn were approximately 466 and 468 nmol mg-1, respectively. The dissociation constants of our probes toward ametryn and prometryn were 2.92 × 10-5 and 1.27 × 10-5, respectively. This is the first report that the developed magnetic probes can be used to trap triazine herbicides. For detection, we used carbon fiber ionization mass spectrometry (CFI-MS), which can be used to directly detect semi-volatiles from the samples in the condensed phase. Because of the semi-volatility of triazine herbicides, the herbicides trapped by the magnetic probes can be directly analyzed by CFI-MS without any elution steps. In addition, we also demonstrated the feasibility of using our approach for detecting triazine herbicides in lake water and drinking water.

Silica gel impregnated with deep eutectic solvent-based matrix solid-phase dispersion followed by high-performance liquid chromatography for extraction and detection of triazine herbicides in brown sugar.

A novel method was developed to determine six triazine herbicides from brown sugar samples using matrix solid-phase dispersion (MSPD) based on silica gel impregnated with deep eutectic solvent (DES) followed by high-performance liquid chromatography with photodiode array detector (HPLC/PDA). Several factors involved in the MSPD procedure such as DES type, DES content in impregnated silica gel, adsorbent-to-sample mass ratio, type and volume of washing solvent, type and volume of eluent, and grinding time were screened using single-factor experiments and then optimized using Box-Behnken design to accomplish the highest recoveries. The above method demonstrated a good linear range (20-1000 µg kg-1) with a determination coefficient exceeding 0.9962, low limits of determination (1.59-3.77 µg kg-1), acceptable limits of quantifications, and acceptable spiking recoveries (95.0-101.7%) for six triazines under optimized conditions. The proposed MSPD-HPLC/PDA method is a convenient, effective, and sensitive method for rapidly isolating and quantifying six triazines from brown sugar.

Magnetic phenolic resin core-shell structure derived carbon microspheres for ultrafast magnetic solid-phase extraction of triazine herbicides.

In this study, monodisperse magnetic carbon microspheres were successfully synthesized through the carbonization of phenolic resin encapsulated Fe3 O4 core-shell structures. The magnetic carbon microspheres showed high performance in ultrafast extraction and separation of trace triazine herbicides from environmental water samples. Under optimized conditions, both the adsorption and desorption processes could be achieved in 2 min, and the maximum adsorption capacity for simazine and prometryn were 387.6 and 448.5 µg/g. Coupled with high-performance liquid chromatography-ultraviolet detection technology, the detection limit of triazine herbicides was in the range of 0.30-0.41 ng/mL. The mean recoveries ranged from 81.44 to 91.03% with relative standard deviations lower than 7.47%. The excellent magnetic solid-phase extraction performance indicates that magnetic carbon microspheres are promising candidate adsorbents for the fast analysis of environmental contaminants.

Recent advances in the extraction of triazine herbicides from water samples.

Pesticides are excessively used in agriculture to improve the quality of crops by eliminating the negative effects of pests. Among the different groups of pesticides, triazine pesticides are a group of compounds that contain a substituted C3 H3 N3 heterocyclic ring, and they are widely used. Triazine pesticides can be dangerous for humans as well as for the aquatic environment because of their high toxicity and endocrine disrupting effect. However, the concentration of these chemical compounds in water samples is low. Moreover, other compounds that may exist in the water samples can interfere with the determination of triazine pesticides. As a result, it is important to develop sample preparation methods that provide preconcentration of the target analyte and sufficient clean-up of the samples. Recently, a wide variety of novel microextraction and miniaturized extraction techniques (e.g., solid-phase microextraction and liquid-phase microextraction, stir bar sorptive extraction, fabric phase sorptive extraction, dispersive solid-phase extraction, and magnetic solid-phase extraction) have been developed. In this review, we aim to discuss the recent advances regarding the extraction of triazine pesticides from environmental water samples. Emphasis will be given to novel sample preparation methods and novel sorbents developed for sorbent-based extraction techniques.

Trace determination of triazine herbicides in fruit and vegetables using novel hydrophobic deep eutectic solvent-based dispersive liquid-liquid microextraction followed by high-performance liquid chromatography-ultraviolet.

In the present research, a novel hydrophobic deep eutectic solvent-based dispersive liquid-liquid microextraction technique was established and combined with high-performance liquid chromatography-ultraviolet for the determination of triazine herbicides in fruit and vegetable samples. A deep eutectic solvent was synthesized using l-menthol as a hydrogen bond acceptor and ethylene glycol as a hydrogen bond donor and used as a green extractant. The characterization of deep eutectic solvent was investigated by Fourier-transform infrared, nuclear magnetic resonance, and thermogravimetric analysis. Under the optimum conditions, relative standard deviation values for intra-day and inter-day of the method based on seven replicate measurements of 50.0 µg/kg of triazines were in the range of 2.8%-5.5% and 3.7%-7.2%, respectively. The calibration graphs were linear in the range of 3.0-500 µg/kg and the limits of detection were in the range of 1.0-2.0 µg/kg. The relative recoveries of different fruit and vegetable samples that have been spiked with two levels of target compounds were 91.5%-109.8%. The method has good linearity, sensitivity, accuracy, and precision. It is also environmentally friendly and was successfully used to determine the concentrations of triazines in fruit and vegetable samples.

Simultaneous determination of triazine herbicides and their metabolites in shellfish by HPLC-MS/MS combined with Q/E-Orbitrap HRMS.

Triazine herbicides are used extensively in agriculture and aquaculture worldwide because of their broad effectiveness in weed control. However, after they are discharged into the sea, they seriously contaminate aquatic ecosystems and threaten aquatic organisms, especially shellfish. Currently, there are no established methods for the detection and confirmation of triazine herbicides and their metabolites in biological matrixes. Hence, the food safety of aquatic products cannot be accurately evaluated, which creates a technical barrier against international aquatic product trade. In this study, for the first time, a method was developed for the analysis and confirmation of seven triazine herbicides and 13 metabolites in shellfish, based on alkaline acetonitrile extraction and neutral Al2O3 cartridge purification coupled with internal standard calibration. Specifically, quantitative and qualitative analysis was conducted using high-performance liquid chromatography-triple quadrupole mass spectrometry (HPLC-MS/MS), and accurate identification was carried out by quadrupole orbitrap high-resolution mass spectrometry (Q/E Orbitrap HRMS). The results showed that target analytes demonstrated good linearity within the corresponding range (R2 > 0.995). The limit of detection and limit of quantitation of the proposed method were 0.1 and 0.3 µg/kg, respectively. The average recoveries of analytes were between 70.0% and 120% when spiked at three levels with blank oyster (Crassostrea gigas) as the matrix, and the relative standard deviations (RSDs) were all less than 12% (n=6). The proposed method was successfully applied for the detection of triazine herbicide residues in oyster samples during actual breeding, and the presence of DIP, HP, DEHA, and other metabolites in positive samples was confirmed by Q/E Orbitrap HRMS. This method exhibits high accuracy, high sensitivity, and good reproducibility. It has promising application prospects in the field of hazard analysis and the positive identification of aquatic products.

A semi-automatic solid phase extraction system based on MIL-101(Cr) foam-filled syringe for detection of triazines in vegetable oils.

In this study, several metal-organic framework-melamine foam columns were first developed and used as a laboratory-made semi-automatic solid phase extraction packed in syringe adsorber for the extraction of six triazine herbicides from vegetable oil samples coupled to high-performance liquid chromatography-tandem mass spectrometry. The metal-organic framework-foam columns were prepared using a simple approach by embedding the solid particles in melamine foam using polyvinylidene difluoride physical encapsulation. The method was applicable to a wide variety of metal-organic framework materials, and the incorporated materials retained their unique properties. Key factors that affect the extraction efficiency, including the MIL-101(Cr) amount, sample flow rate, type and volume of the eluting solvent, and flow rate of eluting solvent, were investigated. Under optimum conditions, the proposed method exhibited low limits of detection (0.017-0.096 ng/mL, S/N = 3) for six triazines. The relative standard deviations calculated for all herbicides ranged from 0.2 to 14.9%. This study demonstrated that the MIL-101(Cr)-foam column can be used as a high-quality adsorption material for the detection of triazines in vegetable oils.

Preparation of porous carbon-based molecularly imprinted polymers for separation of triazine herbicides in corn.

A synthesis route of using cellulose as the precursor to prepare porous carbon (PC) had been established in this study. The as-prepared PC was introduced as carriers in the synthesis process of porous carbon-molecularly imprinted polymers (PC-MIPs), which greatly improved the absorption capacity of MIPs. Triazine pesticides in corn were extracted with matrix solid-phase dispersion (MSPD) using the PC-MIPs as dispersants and determined by ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Under the optimal MSPD condition for extracting six kinds of triazines (simazine, terbutryn, simetryne, prometryne, ametryn, and atrazine), the detection limits were 0.005-0.02 ng g-1, while the precisions were 1.2-5.9%, and the recoveries were 92.6-104.7%. The method has been extensively applied to analyze various corn samples. Atrazine residue (1.2 µg kg-1) was detected in one corn sample, which was lower than the maximum residual limit indicated by the Chinese stated standards (50 µg kg-1).

Magnetic dispersive solid-phase extraction of triazole and triazine pesticides from vegetable samples using a hydrophilic-lipophilic sorbent based on maltodextrin- and ß-cyclodextrin-functionalized graphene oxide.

Maltodextrin- and ß-cyclodextrin-functionalized magnetic graphene oxide (mGO/ß-CD/MD), a novel hydrophilic-lipophilic composite, was successfully fabricated and used for the co-extraction of triazines and triazoles from vegetable samples before HPLC-UV analysis. mGO/ß-CD/MD was synthesized by chemical bonding of ß-CD and MD to the surface of mGO, using epichlorohydrin (ECH) as a linker. The successful synthesis of mGO/ß-CD/MD was confirmed by characterization tests, including attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), and Barrett-Joyner-Halenda (BJH) analyses. The hydrophobic cavity of ß-CD and a large number of hydroxyl groups on the MD structure contributed to the co-extraction of mentioned pesticides with a wide range of polarity. Under the optimized condition (sorbent amount, 30 mg; desorption time, 10 min; desorption solvent volume, 300 µL; desorption solvent, methanol/acetonitrile (1:1) containing 5% (v/v) acetic acid; extraction time, 20 min; and pH of sample solution, 7.0), good linearity within the range 1.0-1000 µg L-1 (r2 ≥ 0.992) was achieved. Extraction efficiencies were in the range 66.4-95.3%, and the limits of detection were 0.01-0.08 µg L-1. Relative recoveries for spiked samples were obtained in the range 88.4-112.0%, indicating that the matrix effect was insignificant, and good precisions (intra- and inter-day) were also achieved (RSDs < 9.0%, n = 3). The results confirmed that the developed method was efficient for the determination  of trace amounts of pesticides in potato, tomato, and corn samples.

Facile preparation of carbon nanotube-based molecularly imprinted monolithic stirred unit.

A lab-made stirring extraction unit based on a selective monolithic solid was developed. The monolith was formed by interconnected carbon nanotubes which were covered by a thin polymeric layer, where specific cavities were generated to provide selective recognition sites in the material. To reach this goal, a water-in-oil (W/O) medium internal phase emulsion (40/60 w/w%), was prepared and photopolymerized. The polymerization reaction took place in the organic or external phase containing the carbon nanotubes, polymeric monomers (cross-linker and functional monomer) and a molecule template. Therefore, it was possible to coat the nanotubes with a layer of molecularly imprinted polymer (MIP) with the target analyte while forming a monolithic and macroscopic structure. The developed selective monolithic stirring extraction units were applied for the determination of secbumeton and structurally related compounds (triazine herbicides) in peppermint mint and tea samples. Their adsorption capacity and selectivity were also compared with a non-imprinted polymer (NIP). Finally, the performance of the method was evaluated for quantitative analysis, achieving limits of detection (LODs) between 0.4 and 2.5 µg·L-1. The intra- and inter-day precision of the method was also evaluated as relative standard deviation, observing values which ranged from 3% to 9% and 9% to 15%, respectively. Graphical Abstract.

Microwave absorption medium-assisted extraction coupled with reversed-phase dispersive liquid-liquid microextraction of triazine herbicides in corn and soybean samples.

A new extraction method, microwave absorption medium-assisted extraction coupled with reversed-phase dispersive liquid-liquid microextraction, was developed for the determination of triazine herbicides in corn and soybean samples. Triazine herbicides were extracted with hexane and then directly enriched into the ionic liquid phase. The purification of sample and concentration of target analytes were performed simultaneously. The method combines the advantages of nonpolar solvent dynamic microwave extraction and reversed-phase dispersive liquid-liquid microextraction, which could greatly simplify the operation and reduce the whole pretreatment time. The Box-Behnken design was used to the optimization of experimental factors involved in the dynamic microwave-assisted extraction. In the present study, good linearity in the range of 5.00-500.00 µg/kg was obtained. The limits of detection and quantification varying from 1.3 to 4.2 and 4.1 to 13.9 µg/kg were achieved, respectively. The intra- and interday precisions were between 2.7 and 6.9%. The present method was applied to the analysis of corn and soybean samples, and the recoveries of analytes ranged from 80.7 to 106.9% with the relative standard deviations of 2.1-7.8%. The present method shows the potentials of practical applications in the treatment of the complex fatty solid samples.

Spatial and Temporal Distribution Characteristics of Triazine Herbicides in Typical Agricultural Regions of Liaoning, China.

The aim of the current study was to track the composition, spatial and temporal distribution charactistics of triazine herbicides in arable soils and corns in typical agricultural regions of Liaoning Province, China. All samples were analyzed using high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). Twelve kinds of triazine herbicides were found including atrazine, simazine, prometryn, propazine, ametryn, metribuzin, simetryn, aziprotryne, cyanizine, atrazine-desethyl, atrazine-desisopropyl and atrazine-desethyl-desisopropyl in the soil samples, of which atrazine, simazine, prometryn, atrazine-desethyl and atrazine-desethyl-desisopropyl were proved to be the predominant species with a high incidence though relatively low contamination level. The maximum concentration of atrazine in the soils was 73.80 µg·kg-1. Five kinds of triazine herbicides were found in corns in the region including atrazine, simazine, prometryn, atrazine-desethyl and atrazine-desethyl-desisopropyl with the detection rate 96.4%, 17.8%, 14.3%, 60.7% and 46.4%, respectively. The maximum contaminant level of atrazine in corns was 12.52 µg·kg-1, which is lower than that regulated in the National Standard of the People's Republic of China (GB2763-2012).

One-step synthesized magnetic MIL-101(Cr) for effective extraction of triazine herbicides from rice prior to determination by liquid chromatography-tandem mass spectrometry.

The magnetic metal-organic framework MIL-101(Cr) material-based solid-phase extraction method coupled with high-performance liquid chromatography and tandem mass spectrometry was applied to extract seven triazine herbicides in rices. Fe3 O4 /MIL-101(Cr) was synthesized using reduction-precipitation method, in which steps including pre-synthesis and modification of Fe3 O4 nanoparticles were by-passed. Various parameters including extraction solvent type and volume, ultrasonic extraction time, amount of Fe3 O4 /MIL-101(Cr) microspheres, adsorption time, desorption volume and time were investigated. Under optimal conditions, the proposed method had the limit of detection (S/N = 3) and the limit of quantification (S/N = 10) of 1.08-18.10 and 3.60-60.20 pg/g, respectively. Relative standard deviations calculated for all herbicides with concentrations of 2 and 20 ng/g were in the range of 0.5 to 13% (n = 3). In addition, at the two above-mentioned concentrations, the method achieved relative recoveries percentages of 79.3 to 116.7% when applied to determine the triazine herbicides in real samples spiked. This rapid, green, non-polluting, pre-concentrated extraction method was successfully developed and applied to analyze herbicides in rice samples.

Matrix solid-phase dispersion coupled with hollow fiber liquid phase microextraction for determination of triazine herbicides in peanuts.

Two extraction procedures, matrix solid-phase dispersion and hollow fiber liquid-phase microextraction, were combined and applied to determine triazine herbicides in peanut samples. The results showed that the established method has high extraction efficiency and could greatly eliminate the interferences from complex matrix samples. A series of important experimental parameters were all investigated in detail. Under the optimal conditions, the developed method has the limits of detection for triazine herbicides in the range of 0.05 to 1.71 µg/kg. Moreover, it has the recovery in the range of 80.4-120.0% with relative standard deviations of equal or lower than 8.9%. The established method may have a great potential in separation, enrichment, and purification of triazines from complex fatty solid samples.

Solid-phase microextraction of triazine herbicides via cellulose paper coated with a metal-organic framework of type MIL-101(Cr), and their quantitation by HPLC-MS.

Cellulose paper was coated with the metal-organic framework MIL-101(Cr) in a chitosan matrix and utilized for thin-film microextraction (TFME). The coated paper possesses excellent extraction efficiency for the triazine herbicides atraton, desmetryn, secbumeton, prometon, ametryn, dipropetryn, and dimethametryn. High-performance liquid chromatography-tandem mass spectrometry was applied to quantify target analytes. The effects of mass ratio of MIL-101(Cr) to chitosan, sample pH value, time of adsorption and desorption, and type and volume of desorption solvent on extraction efficiency were optimized. Under the optimal conditions, the method has limits of detection between 1.5 and 22 ng·L-1. The recoveries of triazines from spiked tap water, drinking water, lake water and river water range from 77.0 to 125.3%, with relative standard deviations of <17.4%. Graphical abstract Cellulose paper was modified with metal-organic framework MIL-101(Cr)/chitosan by using a simple, efficient and environmentally friendly approach. The modified cellulose paper was then used as a novel extraction phase in thin-film microextraction (TFME).

Magnetic partially carbonized cellulose nanocrystal-based magnetic solid phase extraction for the analysis of triazine and triazole pesticides in water.

Magnetic partially carbonized cellulose nanocrystals (MPC-CNC) were obtained by sulfuric acid treatment of microcrystalline cellulose (MCC) and then loaded with magnetic Fe3O4 nanoparticles. The material is shown to be a viable material for magnetic solid phase extraction of triazine and triazole pesticides from water. The pesticides (specifically: simazine, ametryn, prometryn, terbutryn, atrazine, triadimenol, epoxiconazole, myclobutanil, triadimefon and tebuconazole) were quantified by ultra HPLC in tandem with a triple quadrupole mass spectrometry (UHPLC-MS/MS). The effects of NaCl concentration, amount of adsorbent, vortex time, sample volume and pH value on extraction efficiency were optimized by Plackett-Burman design and Box-Behnken design methods. Under the optimal conditions, the method shows the following figures of merit: (a) Linear responses in the range from 0.02-10 µg L-1; (b) detection limits between 2.2 to 6.1 ng L-1 (for S/N = 3); (c) recoveries from spiked samples of 73.7-117.1% with relative standard deviations (RSDs) of 2.0-15.7%; and (d) an enrichment factor of 75. The method was successfully applied to the determination of the pesticides in five environmental water samples. Graphical abstract Schematic representation of the process of magnetic solid phase extracting pesticides in water using MPC-CNC. MCC-microcrystalline cellulose; PC-CNC- partially carbonized cellulose nanocrystals; MPC-CNC-magnetic partially carbonized cellulose nanocrystals.

Development and application of SPE-LC-PDA method for the determination of triazines in water and liquid sludge samples.

The solid phase extraction method has been developed and applied for the simultaneous analysis of the five most commonly used triazine pesticides. The analysis was conducted using a liquid chromatography-photodiode array detector, which was first optimized to improve the limit of quantification and detection. The extraction parameters (conditioning solvent and sample volume) that affect the recovery of the analytes for solid phase extraction were optimized. The recoveries obtained were between 107 and 111%. The limit of detection ranged between 0.668 and 1.16 µg/L and the limit of quantification ranged between 2.01 and 3.54 µg/L. Good precision with a relative standard deviation of less than 8% in all compounds was achieved. The developed and validated method was then applied to river water, wastewater and sludge samples from around KwaZulu-Natal. The quantified concentrations ranged from 8.35 to 2820 µg/L, 2.41-48.7 µg/L and 3.20-65.0 µg/L in sludge, wastewater, and river water respectively.

Application of solvent floatation to separation and determination of triazine herbicides in honey by high-performance liquid chromatography.

Based on the foaming property of the honey, a rapid, simple, and effective method solvent floatation (SF) was developed and firstly applied to the extraction and separation of triazine herbicides in honey. The analytes were determined by high-performance liquid chromatography. Some parameters affecting the extraction efficiencies, such as the type and volume of extraction solvent, type of salt, amount of (NH4)2SO4, pH value of sample solution, gas flow rate, and floatation time, were investigated and optimized. The limits of detection for analytes are in the range of 0.16-0.56 µg kg-1. The recoveries and relative standard deviations for determining triazines in five real honey samples are in the range of 78.2-112.9 and 0.2-9.2%, respectively.