Enhanced localized dipole of Pt-Au single-site catalyst for solar water splitting.

Solar water splitting is regarded as holding great potential for clean fuels production. However, the efficiency of charge separation/transfer of photocatalysts is still too low for industrial application. This paper describes the synthesis of a Pt-Au binary single-site loaded g-C3N4 nanosheet photocatalyst inspired by the concept of the dipole. The existent larger charge imbalance greatly enhanced the localized molecular dipoles over adjacent Pt-Au sites in contrast to the unary counterparts. The superposition of molecular dipoles then further strengthened the internal electric field and thus promoted the charge transportation dynamics. In the modeling photocatalytic hydrogen evolution, the optimal Pt-Au binary site photocatalysts (0.25% loading) showed 4.9- and 2.3-fold enhancement of performance compared with their Pt and Au single-site counterparts, respectively. In addition, the reaction barrier over the Pt-Au binary sites was lowered, promoting the hydrogen evolution process. This work offers a valuable strategy for improving photocatalytic charge transportation dynamics by constructing polynary single sites.

Strong Vertical Piezoelectricity and Broad-pH-Value Photocatalyst in Ferroelastic Y2Se2BrF Monolayer.

With the development of miniaturized devices, there is an increasing demand for 2D multifunctional materials. Six ferroelastic semiconductors, Y2Se2XX' (X, X' = I, Br, Cl, or F; X ≠ X') monolayers, are theoretically predicted here. Their in-plane anisotropic band structure, elastic and piezoelectric properties can be switched by ferroelastic strain. Moderate energy barriers can prevent the undesired ferroelastic switching that minor interferences produce. These monolayers exhibit high carrier mobilities (up to 104 cm2 V-1 s-1) with strong in-plane anisotropy. Furthermore, their wide bandgaps and high potential differences make them broad-pH-value and high-performance photocatalysts at pH value of 0-14. Strikingly, Y2Se2BrF possesses outstanding d33 (d33 = -405.97 pm/V), greatly outperforming CuInP2S6 by 4.26 times. Overall, the nano Y2Se2BrF is a hopeful candidate for multifunctional devices to generate a direct current and achieve solar-free photocatalysis. This work provides a new paradigm for the design of multifunctional energy materials.

Superaerophilic/Superaerophobic NiFe-LDHs Electrode for Enhancing Overall Water Splitting in Alkaline Media.

Overall water splitting, as a critical approach to producing green hydrogen, is greatly impeded by the mass transfer of gaseous bubbles and dissolved gas molecules. Herein, a bifunctional superaerophilic/superaerophobic (SAL/SAB) NiFe layered-double-hydroxides (LDHs) electrode has been developed, which can drive H2 and O2 bubbles out of the reaction system by asymmetric Laplace pressure and accelerate dissolved gases diffusion through reducing their diffusion distance. Consequently, the SAL/SAB NiFe-LDHs electrode exhibits excellent HER activity with an overpotential of -76 mV at -10 mA cm-2 and outstanding oxygen evolution reaction activity with an overpotential of 253 mV at 100 mA cm-2. The bifunctional SAL/SAB NiFe-LDHs electrode is further utilized in overall water splitting, which can achieve 10 mA cm-2 with a cell voltage of 1.54 V. This work provides an efficient strategy to improve the efficiency of overall water splitting and can stimulate new electrode design in various gas-involved processes.

Enabling Ultrafine Ru Nanoparticles with Tunable Electronic Structures via a Double-Shell Hollow Interlayer Confinement Strategy toward Enhanced Hydrogen Evolution Reaction Performance.

Engineering of the catalysts' structural stability and electronic structure could enable high-throughput H2 production over electrocatalytic water splitting. Herein, a double-shell interlayer confinement strategy is proposed to modulate the spatial position of Ru nanoparticles in hollow carbon nanoreactors for achieving tunable sizes and electronic structures toward enhanced H2 evolution. Specifically, the Ru can be anchored in either the inner layer (Ru-DSC-I) or the external shell (Ru-DSC-E) of double-shell nanoreactors, and the size of Ru is reduced from 2.2 to 0.9 nm because of the double-shell confinement effect. The electronic structures are efficiently optimized thereby stabilizing active sites and lowering the reaction barrier. According to finite element analysis results, the mesoscale mass diffusion can be promoted in the double-shell configuration. The Ru-DSC-I nanoreactor exhibits a much lower overpotential (η10 = 73.5 mV) and much higher stability (100 mA cm-2). Our work might shed light on the precise design of multishell catalysts with efficient refining electrostructures toward electrosynthesis applications.

Laser-Induced Controllable Porosity in Additive Manufacturing Boosts Efficiency of Electrocatalytic Water Splitting.

In laser-based additive manufacturing (AM), porosity and unmelted metal powder are typically considered undesirable and harmful. Nevertheless in this work, precisely controlling laser parameters during printing can intentionally introduce controllable porosity, yielding a porous electrode with enhanced catalytic activity for the oxygen evolution reaction (OER). This study demonstrates that deliberate introduction of porosity, typically considered a defect, leads to improved gas molecule desorption, enhanced mass transfer, and increased catalytically active sites. The optimized P-93% electrode displays superior OER performance with an overpotential of 270 mV at 20 mA cm-2. Furthermore, it exhibits remarkable long-term stability, operating continuously for over 1000 h at 10 mA cm-2 and more than 500 h at 500 mA cm-2. This study not only provides a straightforward and mass-producible method for efficient, binder-free OER catalysts but also, if optimized, underscores the potential of laser-based AM driven defect engineering as a promising strategy for industrial water splitting.

Polarization-Switchable Electrochemistry of 2D Layered Bi2O2Se Bifunctional Microreactors by Ferroelectric Modulation.

Ferroelectric catalysts are known for altering surface catalytic activities by changing the direction of their electric polarizations. This study demonstrates polarization-switchable electrochemistry using layered bismuth oxyselenide (L-Bi2O2Se) bifunctional microreactors through ferroelectric modulation. A selective-area ionic liquid gating is developed with precise control over the spatial distribution of the dipole orientation of L-Bi2O2Se. On-chip microreactors with upward polarization favor the oxygen evolution reaction, whereas those with downward polarization prefer the hydrogen evolution reaction. The microscopic origin behind polarization-switchable electrochemistry primarily stems from enhanced surface adsorption and reduced energy barriers for reactions, as examined by nanoscale scanning electrochemical cell microscopy. Integrating a pair of L-Bi2O2Se microreactors consisting of upward or downward polarizations demonstrates overall water splitting in a full-cell configuration based on a bifunctional catalyst. The ability to modulate surface polarizations on a single catalyst via ferroelectric polarization switching offers a pathway for designing catalysts for water splitting.

Unassisted Photoelectrochemical H2O2 Production with In Situ Glycerol Valorization Using α-Fe2O3.

Photoelectrochemical (PEC) H2O2 production via two-electron O2 reduction is promising for H2O2 production without emitting CO2. For PEC H2O2 production, α-Fe2O3 is an ideal semiconductor owing to its earth abundance, superior stability in water, and an appropriate band gap for efficient solar light utilization. Moreover, its conduction band is suitable for O2 reduction to produce H2O2. However, a significant overpotential for water oxidation is required due to the poor surface properties of α-Fe2O3. Thus, unassisted solar H2O2 production is not yet possible. Herein, we demonstrate unassisted PEC H2O2 production using α-Fe2O3 for the first time by applying glycerol oxidation, which requires less bias compared with water oxidation. We obtain maximum Faradaic efficiencies of 96.89 ± 0.6% and 100% for glycerol oxidation and H2O2 production, respectively, with high stability for 25 h. Our results indicate that unassisted and stable PEC H2O2 production is feasible with in situ glycerol valorization using the α-Fe2O3 photoanode.

Efficient Acidic Photoelectrochemical Water Splitting Enabled by Ru Single Atoms Anchored on Hematite Photoanodes.

Photoelectrochemical (PEC) water splitting in acidic media holds promise as an efficient approach to renewable hydrogen production. However, the development of highly active and stable photoanodes under acidic conditions remains a significant challenge. Herein, we demonstrate the remarkable water oxidation performance of Ru single atom decorated hematite (Fe2O3) photoanodes, resulting in a high photocurrent of 1.42 mA cm-2 at 1.23 VRHE under acidic conditions. Comprehensive experimental and theoretical investigations shed light on the mechanisms underlying the superior activity of the Ru-decorated photoanode. The presence of single Ru atoms enhances the separation and transfer of photogenerated carriers, facilitating efficient water oxidation kinetics on the Fe2O3 surface. This is achieved by creating additional energy levels within the Fe2O3 bandgap and optimizing the free adsorption energy of intermediates. These modifications effectively lower the energy barrier of the rate-determining step for water splitting, thereby promoting efficient PEC hydrogen production.

Comparative study of the photocatalytic activity of g-C3N4/MN4 (M = Mn, Fe, Co) for water splitting reaction: A theoretical study.

In this study, nanocomposites of g-C3N4/MN4 (where M is Mn, Fe and Co) have been designed using advanced density functional theory (DFT) calculations. A comprehensive analysis was conducted on the geometry, electronic, optical properties, work function, charge transfer interaction and adhesion energy of the g-C3N4/MN4 heterostructures and concluded that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions exhibit higher photocatalytic performance than individual units. The better photocatalytic activity can be attributed mainly by two facts; (i) the visible light absorption of both g-C3N4/FeN4 and g-C3N4/CoN4 interfaces are higher compared to its isolated analogs and (ii) a significant enhancement of band gap energy in g-C3N4/FeN4 and g-C3N4/CoN4 heterostructures limited the electron-hole recombination significantly. The potential of the g-C3N4/MN4 heterojunctions as a photocatalyst for the water splitting reaction was assessed by examining its band alignment for water splitting reaction. Importantly, while the electronic and magnetic properties of MN4 systems were studied, this is the first example of inclusion of MN4 on graphene-based material (g-C3N4) for studying the photocatalytic activity. The state of the art DFT calculations emphasis that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions are half metallic photocatalysts, which is limited till date.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights.

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Synchronous Surface-Interface and Crystal-Phase Engineered Multifaceted Hybrid Nanostructure of Fe-(1T)-VSe2 Nanosheet and Fe-CoSe2 Nanorods Doped with P for Rapid HER and OER, Kinetics.

Two different nanostructures of two dissimilar highly-potent active electrocatalysts, P-dopped metallic-(1T)-Fe-VSe2 (P,Fe-1T-VSe2 ) nanosheet and P-dopped Fe-CoSe2 (P,Fe-CoSe2 ) nanorods are hybridized and integrated into a single heterostructure (P,Fe-(VCo)Se2 ) on Ni-foam for high-performance water splitting (WS). The catalytic efficiency of VSe2 nanosheets is first enhanced by enriching metallic (1T)-phase, then forming bimetallic Fe-V selenide, and finally by P-doping. Similarly, the catalytic efficiency of CoSe2 nanorods is boosted by first fabricating Fe-Co bimetallic selenide and then P-doping. To develop super-efficient electrocatalysts for WS, two individual electrocatalysts P,Fe-1T-VSe2 nanosheet and P,Fe-CoSe2 are hybridized and integrated to form a heterostructure (P,Fe-(VCo)Se2 ). Metallic (1T)-phase of transition metal dichalcogenides has much higher conductivity than the 2H-phase, while bimetallization and P-doping activate basal planes, develop various active components, and form heterostructures that develop a synergistic interfacial effect, all of which, significantly boost the catalytic efficacy of the P,Fe-(VCo)Se2 . P,Fe-(VCo)Se2 shows excellent performance requiring very low overpotential (ηHER = 50 mV@10 mAcm-2 and ηOER = 230 mV@20 mAcm-2 ). P,Fe-(VCo)Se2 (+, -) device requires a cell potential of 1.48 V to reach 10 mA cm-2 for overall WS.

Dual Heterojunctions and Nanobowl Morphology Engineered BiVO4 Photoanodes for Enhanced Solar Water Splitting.

Photoelectrochemical (PEC) water splitting represents an attractive strategy to realize the conversion from solar energy to hydrogen energy, but severe charge recombination in photoanodes significantly limits the conversion efficiency. Herein, a unique BiVO4 (BVO) nanobowl (NB) heterojunction photoanode, which consists of [001]-oriented BiOCl underlayer and BVO nanobowls containing embedded BiOCl nanocrystals, is fabricated by nanosphere lithography followed by in situ transformation. Experimental characterizations and theoretical simulation prove that nanobowl morphology can effectively enhance light absorption while reducing carrier diffusion path. Density functional theory (DFT) calculations show the tendency of electron transfer from BVO to BiOCl. The [001]-oriented BiOCl underlayer forms a compact type II heterojunction with the BVO, favoring electron transfer from BVO through BiOCl to the substrate. Furthermore, the embedded BiOCl nanoparticles form a bulk heterojunction to facilitate bulk electron transfer. Consequently, the dual heterojunctions engineered BVO/BiOCl NB photoanode exhibits attractive PEC performance toward water oxidation with an excellent bulk charge separation efficiency of 95.5%, and a remarkable photocurrent density of 3.38 mA cm-2 at 1.23 V versus reversible hydrogen electrode, a fourfold enhancement compared to the flat BVO counterpart. This work highlights the great potential of integrating dual heterojunctions engineering and morphology engineering in fabricating high-performance photoelectrodes toward efficient solar conversion.

Efficient and Stable pH-Universal Water Electrolysis Catalyzed by N-Doped Hollow Carbon Confined RuIrOx Nanocrystals.

A facile strategy is developed to fabricate 3 nm RuIrOx nanocrystals anchored onto N-doped hollow carbon for highly efficient and pH-universal overall water splitting and alkaline seawater electrolysis. The designed catalyst exhibits much lower overpotential and superior stability than most previously reported Ru- and Ir-based electrocatalysts for hydrogen/oxygen evolution reactions. It also manifests excellent overall water splitting activities and maintains ≈100% Faradic efficiency with a cell voltage of 1.53, 1.51, and 1.54 V at 10 mA cm-2 for 140, 255, and 200 h in acid, alkaline, and alkaline seawater electrolytes, respectively. The excellent electrocatalytic performance can be attributed to solid bonding between RuIrOx and the hollow carbon skeleton, and effective electronic coupling between Ru and Ir, thus inducing its remarkable electrocatalytic activities and long-lasting stability.

Vapor-Solid Interface Synthesis of Highly Crystalline Covalent Triazine Frameworks for Use as Efficient Photocatalysts.

Harsh synthetic conditions for crystalline covalent triazine frameworks (CTFs) and associated limitations on structural diversities impede not only further development of functional CTFs, but also practical large-scale synthesis. Herein, a mild and universal vapor-solid interface synthesis strategy is developed for highly crystalline CTFs employing trifluoromethanesulfonic acid vapor as catalysts. A series of highly ordered simple and functional CTFs (CTF-TJUs) can be facilely produced. In particular, the porphyrin-involved functional CTF (CTF-TJU-Por1) with high crystallinity is synthesized for the first time via this universal approach. The mechanism of vapor-catalyzed trimerization of nitrile monomers is thoroughly investigated through semi in situ characterizations. As a proof of concept, the photocatalytic performance of synthesized CTFs for water splitting is evaluated. CTF-TJU-133 exhibits significantly greater photocatalytic rates for hydrogen (4.35 µmol h-1) and oxygen (2.18 µmol h-1) evolutions during overall water splitting under visible light irradiations compared to other CTF-TJUs, representing one of the highest values among reported CTF photocatalysts. Further studies reveal that enhanced photocatalytic performance of CTF-TJU-133 results from optimized band structure, extended visible-light absorption, and high carrier separation efficiency. This study provides a promising strategy to synthesize various simple and functional CTFs, which significantly enriched diversities of CTF family for different application purposes.

Unlocking the Potential of High Entropy Alloys in Electrochemical Water Splitting: A Review.

The global pursuit of sustainable energy is focused on producing hydrogen through electrocatalysis driven by renewable energy. Recently, High entropy alloys (HEAs) have taken the spotlight in electrolysis due to their intriguing cocktail effect, broad design space, customizable electronic structure, and entropy stabilization effect. The tunability and complexity of HEAs allow a diverse range of active sites, optimizing adsorption strength and activity for electrochemical water splitting. This review comprehensively covers contemporary advancements in synthesis technique, design framework, and physio-chemical evaluation approaches for HEA-based electrocatalysts. Additionally, it explores design principles and strategies aimed at optimizing the catalytic activity, stability, and effectiveness of HEAs in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. Through an in-depth investigation of these aspects, the complexity inherent in constituent element interactions, reaction processes, and active sites associated with HEAs is aimed to unravel. Eventually, an outlook regarding challenges and impending difficulties and an outline of the future direction of HEA in electrocatalysis is provided. The thorough knowledge offered in this review will assist in formulating and designing catalysts based on HEAs for the next generation of electrochemistry-related applications.

Simultaneously Producing H2 and H2O2 by Photocatalytic Water Splitting: Recent Progress and Future.

The solar-driven overall water splitting (2H2O→2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2O→H2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.

Tuning Iron Active Sites of FeOOH via Al3+ and Heteroatom Doping-Induced Asymmetric Oxygen Vacancy Electronic Structure for Efficient Alkaline Water Splitting.

Oxygen evolution reaction is the essential anodic reaction for water splitting. Designing tunable electronic structures to overcome its slow kinetics is an effective strategy. Herein, the molecular ammonium iron sulfate dodecahydrate is employed as the precursor to synthesize the C, N, S triatomic co-doped Fe(Al)OOH on Ni foam (C,N,S-Fe(Al)OOH-NF) with asymmetric electronic structure. Both in situ oxygen vacancies and their special electronic configuration enable the electron transfer between the d-p orbitals and get the increase of OER activity. Density functional theory calculation further indicates the effect of electronic structure on catalytic activity and stability at the oxygen vacancies. In alkaline solution, the catalyst C,N,S-Fe(Al)OOH-NF shows good catalytic activity and stability for water splitting. For OER, the overpotential of 10 mA cm-2 is 264 mV, the tafel slope is 46.4 mV dec-1, the HER overpotential of 10 mA cm-2 is 188 mV, the tafel slope is 59.3 mV dec-1. The stability of the catalyst can maintain ≈100 h. This work has extraordinary implications for understanding the mechanistic relationship between electronic structure and catalytic activity for designing friendly metal (oxy)hydroxide catalysts.

Hematite Hollow-Sphere-Array Photoanodes for Efficient Photoelectrochemical Water Splitting.

Constructing 3D nanophotonic structures is regarded as an effective method to realize efficient solar-to-hydrogen conversion. These photonic structures can enhance the absorbance of photoelectrodes by the light trapping effect, promote the charge separation by designable charge transport pathway and provide a high specific surface area for catalytic reaction. However, most 3D structures reported so far mainly focused on the influence of light absorption and lacked a systematic investigation of the overall water splitting process. Herein, hematite hollow-sphere-array photoanodes are fabricated through a facile hydrothermal method with polystyrene templates. Validating by simulations and experiments, the hollow sphere array is proved to enhance the efficiency of light harvesting, charge separation and surface reaction at the same time. With an additional annealing treatment in oxygen, a photocurrent density of 2.26 mA cm-2 at 1.23 V versus reversible hydrogen electrode can be obtained, which is 3.70 times larger than that with a planar structure in otherwise the same system. This work gains an insight into the photoelectrochemical water splitting process, which is valuable for the further design of advancing solar driven water splitting devices.

Nanoparticulate TiN Loading to Promote Z-Scheme Water Splitting Using a Narrow-Bandgap Nonoxide-Based Photocatalyst Sheet.

Some oxide-based particulate photocatalyst sheets exhibit excellent activity during the water-splitting reaction. The replacement of oxide photocatalysts with narrow-bandgap photocatalysts based on nonoxides could provide the higher solar-to-hydrogen energy conversion efficiencies that are required for practical implementation. Unfortunately, the activity of nonoxide-based photocatalyst sheets is low in many cases, indicating the need for strategies to improve the quality of nonoxide photocatalysts and the charge transfer process. In this work, single-crystalline particulate SrTaO2N is studied as an oxygen evolution photocatalyst for photocatalyst sheets applied to Z-scheme water splitting, in combination with La5Ti2Cu0.9Ag0.1O7S5 and Au as the hydrogen evolution photocatalyst and conductive layer, respectively. The loading of SrTaO2N with CoOx provided increases activity during photocatalytic water oxidation, giving an apparent quantum yield of 15.7% at 420 nm. A photocatalyst sheet incorporating CoOx-loaded SrTaO2N is also found to promote Z-scheme water splitting under visible light. Notably, the additional loading of nanoparticulate TiN on the CoOx-loaded SrTaO2N improves the water splitting activity by six times because the TiN promotes electron transfer from the SrTaO2N particles to the Au layer. This work demonstrates key concepts related to the improvement of nonoxide-based photocatalyst sheets based on facilitating the charge transfer process through appropriate surface modifications.

Bimetallic Sulfur-Doped Nickel-Cobalt Selenides as Efficient Bifunctional Electrocatalysts for the Complete Decomposition of Water.

The creation and enhancement of non-precious metal bifunctional catalysts with superior stability and stabilizing activity is necessary to achieve water splitting in alkaline media. The paper presents a method for preparing nickel-cobalt bimetallic selenides (NiCo-Sex/CF) using a combination of hydrothermal and high-temperature selenization techniques. NiCo-Sex/CF shows great potential as a catalyst for water separation. The catalyst's electronic structure and active centre can be modified by double doping with sulfur and selenium, resulting in increased selectivity and activity under varying reaction conditions. This method also offers the benefits of a simple preparation process and applicability to a wide range of catalytic reactions. Experimental results demonstrate that an overpotential of 194 mV produces a current density of 10 mA cm-2 when using this electrocatalyst as an OER catalyst. When used as a HER catalyst, the electrocatalyst required an overpotential of only 76 mV to generate a current density of 10 mA cm-2.Furthermore, a voltage of 1.5 V can drive the overall decomposition of water to achieve a current density of 10 mA cm-2. This study highlights the potential of sulfur-selenide double-doped catalysts for both scientific research and practical applications.