Improving Gene Delivery: Synergy between Alkyl Chain Length and Lipoic Acid for PDMAEMA Hydrophobic Copolymers.

In the field of gene delivery, hydrophobic cationic copolymers hold great promise. They exhibit improved performance by effectively protecting genetic material from serum interactions while facilitating interactions with cellular membranes. However, managing cytotoxicity remains a significant challenge, prompting an investigation into suitable hydrophobic components. A particularly encouraging approach involves integrating nutrient components, like lipoic acid, which is known for its antioxidant properties and diverse cellular benefits such as cellular metabolism and growth. In this study, a copolymer library comprising 2-(dimethylamino)ethyl methacrylate (DMAEMA) and lipoic acid methacrylate (LAMA), combined with either n-butyl methacrylate (nBMA), ethyl methacrylate (EMA), or methyl methacrylate (MMA), is synthesized. This enables to probe the impact of lipoic acid incorporation while simultaneously exploring the influence of pendant acyclic alkyl chain length. The inclusion of lipoic acid results in a notable boost in transfection efficiency  while maintaining low cytotoxicity. Interestingly, higher levels of transfection efficiency are achieved in the presence of nBMA, EMA, or MMA. However, a positive correlation between pendant acyclic alkyl chain length and cytotoxicity is observed. Consequently, P(DMAEMA-co-LAMA-co-MMA), emerges as a promising candidate. This is attributed to the optimal combination of low cytotoxic MMA and transfection-boosting LAMA, highlighting the crucial synergy between LAMA and MMA.

Role of Alkyl Chain Length in Surfactant-Induced Precipitation of Reactive Brilliant Blue KN-R.

To develop a cost-effective method for the effective removal of reactive brilliant blue KN-R (RBB KN-R) from wastewater, we investigated the interactions between RBB KN-R and three cationic surfactants with different alkyl chain lengths, namely dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyltrimethylammonium bromide (CTAB). Employing a conductivity analysis, surface tension analysis, ultraviolet-visible spectrophotometry, and molecular dynamics simulation, we ascertained that RBB KN-R formed a 1:1 molar ratio dye-surfactant complex with each surfactant through electrostatic attraction. Notably, an augmentation in alkyl chain length correlated with increased binding strength between RBB KN-R and the surfactant. The resulting dye-surfactant complex exhibited heightened surface activity, enabling interactions through hydrophobic forces to generate dye-surfactant aggregates when the molar ratio was below 1:1. Within these mixed aggregates, self-assembly of RBB KN-R molecules occurred, leading to the formation of dye aggregates. Due to the improved hydrophobicity with increased alkyl chain length, TTAB and CTAB could encapsulate dye aggregates within the mixed aggregates, but DTAB could not. The RBB KN-R aggregates tended to distribute on the surface of the RBB KN-R-DTAB mixed aggregates, resulting in low stability. Thus, at a DTAB concentration lower than CMC, insoluble particles readily formed and separated from surfactant aggregates at an RBB KN-R and DTAB molar ratio of 1:4. Analyzing the RBB KN-R precipitate through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) and measuring the DTAB concentration in the supernate revealed that, at this molar ratio, all RBB KN-R precipitated from the dye-surfactant mixed solution, with only 7.5 ± 0.5% of DTAB present in the precipitate. Furthermore, the removal ratio of RBB KN-R reached nearly 100% within a pH range of 1.0 to 9.0 and standing time of 6 h. The salt type and concentration did not significantly affect the precipitation process. Therefore, this simultaneous achievement of successful RBB KN-R removal and effective separation from DTAB underscores the efficacy of the proposed approach.

Experimental and Simulation Studies of Imidazolium Chloride Ionic Liquids with Different Alkyl Chain Lengths for Viscosity Reductions in Heavy Crude Oil: The Effect on Asphaltene Dispersion.

Heavy crude oil poses challenges in terms of extraction and transportation due to its high viscosity. In the pursuit of effective methods to reduce viscosity in heavy crude oil, this study investigates the potential of imidazolium chloride ionic liquids with varying alkyl chain lengths as viscosity reducers. The experimental results demonstrate that the addition of 1-dodecyl-3-methylimidazole chloride ([C12-MIM]Cl) leads to a maximum viscosity reduction of 49.87%. Solubility parameters were calculated based on characterization of the average molecular structure of the asphaltenes. The viscosity reduction effect is enhanced when the solubility parameter of the ionic liquid closely matches that of the asphaltene. The initial asphaltene deposition point of heavy crude oil is increased from 63% to 68% with the addition of 150 mg/L [C12-MIM]Cl. Furthermore, the average particle size of asphaltene deposits decreases from 79.35 µm to 48.54 µm. The viscosity of heavy crude oil is influenced by the aggregation of asphaltenes. The ability of ionic liquids, especially those with longer alkyl chains, to disperse asphaltene molecules and reduce viscosity has been confirmed through molecular dynamics and quantum mechanical simulations.

High-performance Piezoelectric Two-dimensional Covalent Organic Frameworks.

Organic piezoelectric nanogenerators (PENGs) are attractive in harvesting mechanical energy for various self-powering systems. However, their practical applications are severely restricted by their low output open circuit voltage. To address this issue, herein, we prepared two two-dimensional (2D) covalent organic frameworks (COFs, CityU-13 and CityU-14), functionalized with fluorinated alkyl chains for PENGs. The piezoelectricity of both COFs was evidenced by switchable polarization, characteristic butterfly amplitude loops, phase hysteresis loops, conspicuous surface potentials and high piezoelectric coefficient value (d33). The PENGs fabricated with COFs displayed highest output open circuit voltages (60 V for CityU-13 and 50 V for CityU-14) and delivered satisfactory short circuit current with an excellent stability of over 600 seconds. The superior open circuit voltages of CityU-13 and CityU-14 rank in top 1 and 2 among all reported organic materials-based PENGs.

Simplified Y6-Based Nonfullerene Acceptors: In-Depth Study on Molecular Structure-Property Relation, Molecular Dynamics Simulation, and Charge Dynamics.

Two new Y6 derivatives of symmetrical YBO-2O and asymmetrical YBO-FO nonfullerene acceptors (NFAs) are prepared with a simplified synthetic procedure by incorporating octyl and fluorine substituents onto the terminal 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) moiety. By moving the alkyl substituents on the Y6 core to the terminal INCN moiety, the lowest unoccupied molecular orbital of the YBO NFAs increases without decreasing solubility, resulting in high open-circuit voltages of the devices. Molecular dynamics simulation shows that YBO-2O/-FO preferentially form core-core and terminal-terminal dimeric interactions, demonstrating their tighter packing structure and higher electron mobility than Y6, which is consistent with 2D grazing incidence X-ray scattering and space charge limited current measurements. In blend films, the hole transfer (HT) from YBO-2O/-FO to the polymer donor PM6 is studied in detail by transient absorption spectroscopy, demonstrating efficient HT from YBO-FO to PM6 with their suitable energy level alignment. Despite the simplified synthesis, YBO-FO demonstrates photovoltaic performance similar to that of Y6, exhibiting a power conversion efficiency of 15.01%. Overall, this design strategy not only simplifies the synthetic procedures but also adjusts the electrical properties by modifying the intermolecular packing and energy level alignment, suggesting a novel simplified molecular design of Y6 derivatives.

Alkyl Chains Modulated Magnetization Dynamics of Mononuclear Trigonal Prismatic CoII Complexes.

Four benzeneboron-capped mononuclear CoII complexes with different alkyl substitutions on the fourth position of phenylboronic acid were obtained. The CoII ions are all wrapped by the pocket-like ligands and located in trigonal prismatic coordination geometries. Alternating-current magnetic susceptibility measurements reveal that they show different magnetization dynamics, such as distinct relaxation rates at the same temperature, the faster QTM rates for the ethyl and propyl substituted complexes, as well as different relaxation processes. Magneto-structural correlation study reveals that the various deviations of coordination geometry of CoII ion, diverse crystal packings and possible different vibration modes of substituents caused by modifying alkyl chains are the key factors affecting the magnetization dynamics. This work demonstrates that the alkyl chains even locating far away from the metal center can have a large impact on the magnetic behavior of the CoII complex with a very rigid coordination geometry, offering a new perspective towards transition metal based single-molecule magnets.

Synthesis and Antiproliferative Insights of Lipophilic Ru(II)-Hydroxy Stearic Acid Hybrid Species.

Metallodrugs represent a combination of multifunctionalities that are present concomitantly and can act differently on diverse biotargets. Their efficacy is often related to the lipophilic features exhibited both by long carbo-chains and the phosphine ligands. Three Ru(II) complexes containing hydroxy stearic acids (HSAs) were successfully synthesized in order to evaluate possible synergistic effects between the known antitumor activity of HSA bio-ligands and the metal center. HSAs were reacted with [Ru(H)2CO(PPh3)3] selectively affording O,O-carboxy bidentate complexes. The organometallic species were fully characterized spectroscopically using ESI-MS, IR, UV-Vis, and NMR techniques. The structure of the compound Ru-12-HSA was also determined using single crystal X-ray diffraction. The biological potency of ruthenium complexes (Ru-7-HSA, Ru-9-HSA, and Ru-12-HSA) was studied on human primary cell lines (HT29, HeLa, and IGROV1). To obtain detailed information about anticancer properties, tests for cytotoxicity, cell proliferation, and DNA damage were performed. The results demonstrate that the new ruthenium complexes, Ru-7-HSA and Ru-9-HSA, possess biological activity. Furthermore, we observed that the Ru-9-HSA complex shows increased antitumor activity on colon cancer cells, HT29.

Switching Chirophilic Self-assembly: From meso-structures to Conglomerates in Liquid and Liquid Crystalline Network Phases of Achiral Polycatenar Compounds.

Spontaneous generation of chirality from achiral molecules is a contemporary research topic with numerous implications for technological applications and for the understanding of the development of homogeneous chirality in biosystems. Herein, a series of azobenzene based rod-like molecules with an 3,4,5-trialkylated end and a single n-alkyl chain involving 5 to 20 aliphatic carbons at the opposite end is reported. Depending on the chain length and temperature these achiral molecules self-assemble into a series of liquid and liquid crystalline (LC) helical network phases. A chiral isotropic liquid (Iso1 [ *] ) and a cubic triple network phase with chiral I23 lattice were found for the short chain compounds, whereas non-cubic and achiral cubic phases dominate for the long chain compounds. Among them a mesoscale conglomerate with I23 lattice, a tetragonal phase (Tetbi ) containing one chirality synchronized and one non-synchronized achiral network, an achiral double network meso-structure with Ia 3 ‾ $\bar 3$ d space group and an achiral percolated isotropic liquid mesophase (Iso1 ) were found. This sequence is attributed to an increasing strength of chirality synchronization between the networks, combined with a change of the preferred mode of chirophilic self-assembly between the networks, switching from enantiophilic to enantiophobic with decreasing chain length and lowering temperature. These nanostructured and mirror symmetry broken LC phases exist over wide temperature ranges which is of interest for potential applications in chiral and photosensitive functional materials derived from achiral compounds.

Hydrophobically Modified Cellulose Nanofibers-Enveloped Solid Lipid Microparticles for Improved Antioxidant Cargo Retention.

This study introduces a cellulose nanofiber surfactant system, in which the surface is hydrophobically modified with different alkyl chain structures for the effective envelopment of solid lipid microparticles (SLMs). To endow bacterial cellulose nanofibers (BCNFs) with excellent ability to assemble at the lipid-water interface, alkyl chains with designated molecular structures, such as decane, didecane, and eicosane, are covalently grafted onto the BCNF surface. Interfacial tension and interfacial rheology measurements indicate that dialkyl chain-grafted BCNFs (diC10 BCNF) exhibit strong interfibrillar association at the interface. The formation of a dense and tough fibrillary membrane contributes significantly to the enveloping of the SLMs, regardless of the lipid type. Because the diC10 BCNF-enveloped SLMs exhibit a core molecular crystalline phase at the microscale, they can immobilize an oil-soluble antioxidant while maintaining its long-term storage stability. These findings show that the cellulose-surfactant-based SLM technology is applicable to the stabilization and formulation of readily denatured active ingredients.

A Highly Selective and Sensitive Chiral Derivatization Method for High- Performance Liquid Chromatographic Determination of the Stereoisomer Composition of Natural Products With Chiral Branched Alkyl Chains.

In the study of chiral biologically active compounds such as pheromones, the analysis of the stereoisomer composition is essential to gain more insight into their stereochemical diversity, which affects the pheromone communication channels and therefore the diversification of species. This mini-review summarizes the development of fluorescence derivatization reagents for high-performance liquid chromatographic (HPLC) determination of the absolute configuration and stereoisomer composition of natural products with a chiral branched alkyl chain. The diastereomeric separation of anteiso fatty acids bearing a branched methyl group up to the C-26 position was achieved by reversed-phase HPLC under very low column temperature conditions using (1S,2S)-2-(2,3-anthracenedicarboximido)cyclohexanol as a derivatization reagent, enabling fluorescent detection of these compounds at femtomole levels. This method was also applicable to chiral alcohols and amines with chiral branched methyl groups using similar reagents containing a carboxyl group. These reagents were successfully applied to determine the absolute configurations and stereoisomer composition of the chiral alkyl chain of natural compounds including some insect pheromones, miyakosyne A, and plakoside A. The combination of these reagents and two-dimensional HPLC constitutes a very powerful tool for the analysis of the stereoisomers of natural crude samples. Furthermore, the analysis of some natural bioactive substances using this method demonstrated that natural substances are not always optically pure, consisting instead of stereoisomer mixtures exhibiting stronger activity than optically pure enantiomers. These results cast doubts on the concept of biological homochirality and demonstrate that natural pheromones do not always show the highest activity among all stereoisomers.

Protic Ionic Liquid Cation Alkyl Chain Length Effect on Lysozyme Structure.

Solvents that stabilize protein structures can improve and expand their biochemical applications, particularly with the growing interest in biocatalytic-based processes. Aiming to select novel solvents for protein stabilization, we explored the effect of alkylammonium nitrate protic ionic liquids (PILs)-water mixtures with increasing cation alkyl chain length on lysozyme conformational stability. Four PILs were studied, that is, ethylammonium nitrate (EAN), butylammonium nitrate (BAN), hexylammonium nitrate (HAN), and octylammonium nitrate (OAN). The surface tension, viscosity, and density of PIL-water mixtures at low to high concentrations were firstly determined, which showed that an increasing cation alkyl chain length caused a decrease in the surface tension and density as well as an increase in viscosity for all PIL solutions. Small-angle X-ray scattering (SAXS) was used to investigate the liquid nanostructure of the PIL solutions, as well as the overall size, conformational flexibility and changes to lysozyme structure. The concentrated PILs with longer alkyl chain lengths, i.e., over 10 mol% butyl-, 5 mol% hexyl- and 1 mol% octylammonium cations, possessed liquid nanostructures. This detrimentally interfered with solvent subtraction, and the more structured PIL solutions prevented quantitative SAXS analysis of lysozyme structure. The radius of gyration (Rg) of lysozyme in the less structured aqueous PIL solutions showed little change with up to 10 mol% of PIL. Kratky plots, SREFLEX models, and FTIR data showed that the protein conformation was maintained at a low PIL concentration of 1 mol% and lower when compared with the buffer solution. However, 50 mol% EAN and 5 mol% HAN significantly increased the Rg of lysozyme, indicating unfolding and aggregation of lysozyme. The hydrophobic interaction and liquid nanostructure resulting from the increased cation alkyl chain length in HAN likely becomes critical. The impact of HAN and OAN, particularly at high concentrations, on lysozyme structure was further revealed by FTIR. This work highlights the negative effect of a long alkyl chain length and high concentration of PILs on lysozyme structural stability.

Aggregation-Induced Intermolecular Charge Transfer Emission for Solution-Processable Bipolar Host Material via Adjusting the Length of Alkyl Chain.

Molecules with donor-spacer-acceptor configuration have been developed rapidly given their peculiar properties. How to utilize intermolecular interactions and charge transfers for solution-processed organic light-emitting diodes (OLEDs) greatly relies on molecular design strategy. Herein, soluble luminophores with D-spacer-A motif were constructed via shortening the alkyl chain from nonane to propane, where the alkyl chain was utilized as a spatial linker between the donor and acceptor. The alkyl chain blocks the molecular conjugation and induces the existence of aggregation-induced intermolecular CT emission, as well as the improved solubility and morphology in a solid-state film. In addition, the length of the alkyl chain affects the glass transition temperature, carrier transport and balance properties. The mCP-3C-TRZ with nonane as the spacer shows better thermal stability and bipolar carrier transport ability, so the corresponding solution-processable phosphorescent organic light-emitting diodes exhibit superior external quantum efficiency of 9.8% when using mCP-3C-TRZ as a host material. This work offers a promising strategy to establish a bipolar host via utilizing intermolecular charge transfer process in an aggregated state.

Hydrophobic Metal-Organic Frameworks and Derived Composites for Microelectronics Applications.

The extraordinary characteristic features of metal-organic frameworks (MOFs) make them applicable for use in a variety of fields but their conductivity in microelectronics over a wide relative humidity (RH) range has not been extensively explored. To achieve good performance, MOFs must be stable in water, i. e., under humid conditions. However, the design of ultrastable hydrophobic MOFs with high conductivity for use in microelectronics as conducting and dielectric materials remains a challenge. In this Review, we discuss applications of an emerging class of hydrophobic MOFs with respect to their use as active sensor coatings, tunable low-κ dielectrics and conductivity, which provide high-level roadmap for stimulating the next steps toward the development and implementation of hydrophobic MOFs for use in microelectronic devices. Several methodologies including the incorporation of long alkyl chain and fluorinated linkers, doping of redox-active 7,7,8,8-tetracyanoquinodimethane (TCNQ), the use of guest molecules, and conducting polymers or carbon materials in the pores or surface of MOFs have been utilized to produce hydrophobic MOFs. The contact angle of a water droplet and a coating can be used to evaluate the degree of hydrophobicity of the surface of a MOF. These unique advantages enable hydrophobic MOFs to be used as a highly versatile platform for exploring multifunctional porous materials. Classic representative examples of each category are discussed in terms of coordination structures, types of hydrophobic design, and potential microelectronic applications. Lastly, a summary and outlook as concluding remarks in this field are presented. We envision that future research in the area of hydrophobic MOFs promise to provide important breakthroughs in microelectronics applications.

Single-Molecule Charge-Transport Modulation Induced by Steric Effects of Side Alkyl Chains.

The experimental investigation of side-chain effects on intramolecular charge transport in π-conjugated molecules is essential but remains challenging. Herein, the dependence of intra-molecular conductance on the nature of branching alkyl chains is investigated through a combination of the scanning tunneling microscope break junction (STM-BJ) technique and density functional theory. Three thiophene-flanked diketopyrrolopyrrole (DPP) derivatives with different branching alkyl chains (isopentane, 3-methylheptane, and 9-methylnonadecane) are used with phenylthiomethyl groups as the anchoring groups. The results of single-molecule conductance measurements show that as the alkyl chain becomes longer, the torsional angles between the aromatic rings increase due to steric crowding, and therefore, the molecular conductance of DPP decreases due to reduction in conjugation. Both theoretical simulations and 1 H NMR spectra demonstrate that the planarity of the DPPs is directly reduced after introducing longer branching alkyl chains, which leads to a reduced conductance. This work indicates that the effect of the insulating side chain on the single-molecule conductance cannot be neglected, which should be considered for the design of future organic semiconducting materials.

Voltammetric sensor based on long alkyl chain tetraalkylammonium ionic liquids comprising ascorbate anion for determination of nitrite.

An electrochemical sensor was fabricated utilizing ionic liquids possessing cations with long alkyl chains such as trimethyl octadecylammonium and behenyl trimethylammonium and ascorbate anion. The ionic liquids were drop-coated onto the electrode. Thin modifying layers were prepared. Cyclic voltammetric investigations revealed electrostatic interactions between the electrochemical probes and the modified surface, proving that a positive charge was established at the film surface. Hence, negatively charged species such as nitrite can be pre-concentrated on the surface of presented modified electrodes. The fabricated electrodes have been used as a voltammetric sensor for nitrite. Due to the electrostatic accumulation properties of long alkyl cation, the assay exhibits a remarkable improvement in the voltammetric response toward nitrite oxidation. The influence of pH on the electrode response was thoroughly investigated, and the mechanism of the electrode was established. The developed sensor showed a linear electrochemical response in the range 1.0-50 µM with a detection limit of 0.1 µM. The electrode revealed good storage stability, reproducibility, and anti-interference ability. The determination of nitrite performed in curing salts brought satisfactory results.

The Aggregation Regularity Effect of Multiarylpyrroles on Their Near-Infrared Aggregation-Enhanced Emission Property.

Increasing the quantum yield of near-infrared (NIR) emissive dyes is critical for biological applications because these fluorescent dyes generally show decreased emission efficiency under aqueous conditions. In this work, we designed and synthesized several multiarylpyrrole (MAP) derivatives, in which a furanylidene (FE) group at the 3-position of the pyrrole forms donor-π-acceptor molecules, MAP-FE, with a NIR emissive wavelength and aggregation-enhanced emission (AEE) features. Different alkyl chains of MAP-FEs linked to phenyl groups at the 2,5-position of the pyrrole ring resulted in different emissive wavelengths and quantum yields in aggregated states, such as powders or single crystals. Powder XRD data and single crystal analysis elucidated that the different lengths of alkyl chains had a significant impact on the regularity of MAP-FEs when they were forced to aggregate or precipitate, which affected the intermolecular interaction and the restriction degree of the rotating parts, which are essential components. Therefore, an increasing number of NIR dyes could be developed by this design strategy to produce efficient NIR dyes with AEE. Moreover, this method can provide general guidance for other related fields, such as organic solar cells and organic light-emitting materials, because they are all applied in the aggregated state.

In vitro C132-dealkoxycarbonylations of zinc chlorophyll a derivatives including C132-substitutes by a BciC enzyme.

Chlorosomes in the green photosynthetic bacteria are the largest and most efficient light-harvesting antenna systems of all phototrophs. The core part of chlorosomes consists of bacteriochlorophyll c, d, e, or f molecules. In their biosynthetic pathway, a BciC enzyme catalyzes the removal of the C132-methoxycarbonyl group of chlorophyllide a. In this study, in vitro C132-dealkoxycarbonylations of zinc chlorophyll a derivatives bearing a methyl-, ethyl- or propyl-esterifying group and its methyl ester analogs with additional alkyl and hydroxy groups at the C132-position were examined using the BciC enzyme. The BciC-catalyzed reaction activity for the C132-methoxycarbonylated substrate was comparable to that for the ethoxycarbonylated compound; however, depropoxycarbonylation did not proceed. The BciC enzymatic demethoxycarbonylation of zinc methyl C132-alkylated pheophorbides a was gradually suppressed with the elongation of the alkyl chain and finally became inactive for the propyl substrate. The reaction of the C132-hydroxylated substrate (allomer) was accelerated compared to that of the C132-methyl analog possessing a similar steric size, and gave the corresponding C132-oxo product via further air-oxidation. All of the abovementioned enzymatic reactions occurred for one of the C132-epimers with the same configuration as in chlorophyllide a. The above substrate specificities and product distributions indicated the stereochemistry and size of the BciC enzymatic active site (pocket).

Safety of sodium hyaluronate eye drop with C12-benzalkonium chloride.

PURPOSE: In this study, we investigated the effects of commercially available multi-dose sodium hyaluronate 0.1% (Hyalein®; Santen, Osaka, Japan) containing 0.003% C12-benzalkonium chloride (BAC) on the Corneal epithelium and its degree of safety. METHODS: Japanese white male rabbits were divided into four groups. The corneas of each group exposed to one of the following solutions: sodium hyaluronate 0.1%, C12-BAC, C12, 14, 16-BAC Mixture, and Hank's Balanced Salt Solution (HBSS) (as control), respectively. Corneal transepithelial electrical resistance (TER) changes after 60 s of exposure to the above solutions were measured in living rabbits. TER reflects the barrier function of the epithelium. In addition, scanning electron microscopy was used to examine the acute effects of the above solutions on the integrity of the corneal epithelium of four groups. RESULTS: There was no significant decrease in the corneal TER after exposure of the cornea to Hyalein® eye drops as compared to HBSS control eyes. Also, BAC mixture solution and C12-BAC did not produce any significant decrease in the corneal TER as compared to HBSS control eyes. All the corneal epithelium exposed to Hyalein®, 0.003% C12-BAC and 0.003% BAC mixture exhibited a regular appearance of the superficial cells with a high density of microvilli. CONCLUSION: This study confirms that Hyalein® has no acute hazardous effect on corneal epithelium.

Development of colloidally stable carbazole-based fluorescent nanoaggregates.

Fluorescent nanomaterials require high colloidal stability for effective use in imaging and sensing applications. We herein report the synthesis of carbazole-based organic fluorescent nanoaggregates, and demonstrate the superior colloidal stability of alkyl-substituted dye aggregates over their non-alkylated analogs. The role of alkyl chains in self-assembly and stability of such nanoaggregates is discussed based on both experimental and molecular dynamics simulation data, and spectral characteristics of the precursor dyes and their aggregates are described. The obtained results provide new insights on development of colloidally stable organic fluorescent nanomaterials with low polydispersity.

Artificial bioconjugates with naturally occurring linkages: the use of phosphodiester.

Artificial orthogonal bond formations such as the alkyne-azide cycloaddition have enabled selective bioconjugations under mild conditions, yet naturally occurring linkages between native functional groups would be more straightforward to elaborate bioconjugates. Herein, we describe the use of a phosphodiester bond as a versatile option to access various bioconjugates. An opposite activation strategy, involving 5'-phosphitylation of the supported oligonucleotides, has allowed several biomolecules that possess an unactivated alcohol to be directly conjugated. It should be noted that there is no need to pre-install artificial functional groups and undesired and unpredictable perturbations possibly caused by bioconjugation can be minimized.