Harnessing an amide-based covalent organic framework in solid-phase extraction for chlorophenol analysis in industrial wastewaters.

An amide-based covalent organic framework (COF) was successfully synthesized using the reaction between 1,3,5-trimesoyl chloride and ethylenediamine. The structure and morphology of the COF were characterized using Fourier-transform infrared spectra, nuclear magnetic resonance spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller surface area analysis. The COF was employed as a solid-phase extraction adsorbent for the sampling and preconcentration of chlorophenols from industrial wastewater samples prior to high-performance liquid chromatography with ultraviolet detection. The experimental parameters influencing the extraction efficiency including type and volume of eluent solvent, sample solution volume, salt concentration, sample flow rate, and sample solution pH were investigated and optimized using a response surface methodology employing Box-Behnken-design. Under optimized conditions, calibration curves exhibited good linearities over the range of 0.003-10 µg/mL with determination coefficients (R2) ranging from 0.9982 to 0.9999. The method's limits of detection ranged from 0.001 to 0.01 µg/mL. Good repeatability was achieved with relative standard deviations below 4.7%. The developed procedure utilizing the COF adsorbent was successfully applied to determine chlorophenols accurately and precisely in various industrial wastewater samples.

Synergistic enhancement of chlorophenols removal using eco-friendly alginate@montmorillonite hybrid bio-capsules: insights from encapsulation and kinetic release studies.

This study investigates the synergistic effects of alginate@montmorillonite (Alg@Mt) hybrid microcapsules for enhancing water purification, focusing on improving the encapsulation of hydrophobic contaminants. Alg@Mt microcapsules were prepared through ionotropic gelation. Characterisation was performed using SEM-EDX, FTIR, XRD, and TGA. Encapsulation efficiency (EE), loading capacity (LC), and release behaviour were also examined. Alg@Mt microcapsules effectively removed phenol and its chlorinated derivatives from water. Incorporating Na-Mt improved structural and thermal properties, EE, and LC. Increasing the clay content to 60% (w/w) raised the EE of phenol and its more hydrophobic derivative, 2,4,6-trichlorophenol, from 39.74 ± 3.1% (w/w) and 63.91 ± 2% (w/w) to 60.56 ± 1.6% (w/w) and 82.28 ± 2.3% (w/w), respectively, with more controlled release rates, following Fickian diffusion mechanism. EE increased with phenolic substances hydrophobicity, while LC and release rates were inversely related. This approach is promising for removing hydrophobic contaminants from water.

Assessment of the inhibition risk of chlorophenol substances on cytochrome P450 via cocktail inhibition assays.

Chlorophenols (CPs) are widespread pollutants in nature. CPs have raised significant concern due to their potential hepatotoxic effects on humans. This research aimed to ascertain the inhibitory potential of eleven CPs (2-CP, 3-CP, 4-CP, 2,4-DCP, 2,3,4-TCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,5-TeCP, 2,3,4,6-TeCP, 2,3,5,6-TeCP, and PCP) on nine human CYP isoforms (CYP1A2, 2A6, 2B6, 2C8, 2C9, 2C19, 2D6, 2E1, and 3A4). The CPs that inhibit the activity of CYP isoforms were detected with human liver microsomes (HLM) using a cocktail approach in vitro. The results demonstrated that trichlorophenols, tetrachlorophenols, and PCP strongly inhibited CYP2C8 and CYP2C9. The half inhibition concentration (IC50) value of 2,3,4,6-TeCP and PCP for CYP2C8 inhibition was 27.3 µM and 12.3 µM, respectively. The IC50 for the inhibition of 2,4,6-TCP, 2,3,4,6-TeCP and PCP towards CYP2C9 were calculated to be 30.3 µM, 5.8 µM and 2.2 µM, respectively. 2,3,4,6-TeCP, and PCP exhibited non-competitive inhibition towards CYP2C8. 2,4,6-TCP, 2,3,4,6-TeCP, and PCP exhibited competitive inhibition towards CYP2C9. The inhibition kinetics parameters (Ki) were 51.51 µM, 22.28 µM, 37.86 µM, 7.27 µM, 0.68 µM for 2,3,4,6-TeCP-CYP2C8, PCP-CYP2C8, 2,4,6-TCP-CYP2C9, 2,3,4,6-TeCP-CYP2C9, PCP-CYP2C9, respectively. This study also defined clear structure-activity relationships (SAR) of CPs on CYP2C8, supported by molecular docking studies. Overall, CPs were found to cause inhibitory effects on CYP isoforms in vitro, and this finding may provide a basis for CPs focused on CYP isoforms inhibition endpoints.

Adaptive laboratory evolution of Rhodococcus rhodochrous DSM6263 for chlorophenol degradation under hypersaline condition.

BACKGROUND: Normally, a salt amount greater than 3.5% (w/v) is defined as hypersaline. Large amounts of hypersaline wastewater containing organic pollutants need to be treated before it can be discharged into the environment. The most critical aspect of the biological treatment of saline wastewater is the inhibitory/toxic effect exerted on bacterial metabolism by high salt concentrations. Although efforts have been dedicated to improving the performance through the use of salt-tolerant or halophilic bacteria, the diversities of the strains and the range of substrate spectrum remain limited, especially in chlorophenol wastewater treatment. RESULTS: In this study, a salt-tolerant chlorophenol-degrading strain was generated from Rhodococcus rhodochrous DSM6263, an original aniline degrader, by adaptive laboratory evolution. The evolved strain R. rhodochrous CP-8 could tolerant 8% NaCl with 4-chlorophenol degradation capacity. The synonymous mutation in phosphodiesterase of strain CP-8 may retard the hydrolysis of cyclic adenosine monophosphate (cAMP), which is a key factor reported in the osmoregulation. The experimentally verified up-regulation of intracellular cAMP level in the evolved strain CP-8 contributes to the improvement of growth phenotype under high osmotic condition. Additionally, a point mutant of the catechol 1,2-dioxygenase, CatAN211S, was revealed to show the 1.9-fold increment on activity, which the mechanism was well explained by molecular docking analysis. CONCLUSIONS: This study developed one chlorophenol-degrading strain with extraordinary capacity of salt tolerance, which showed great application potential in hypersaline chlorophenol wastewater treatment. The synonymous mutation in phosphodiesterase resulted in the change of intracellular cAMP concentration and then increase the osmotic tolerance in the evolved strain. The catechol 1,2-dioxygenase mutant with improved activity also facilitated chlorophenol removal since it is the key enzyme in the degradation pathway.

Enhanced Hydrosaturation Selectivity and Electron Transfer for Electrocatalytic Chlorophenols Hydrogenation on Ru Sites.

Electrocatalytic hydrogenation is acknowledged as a promising strategy for chlorophenol dechlorination. However, the widely used Pd catalysts exhibit drawbacks, such as high costs and low selectivity for phenol hydrosaturation. Herein, we demonstrate the potential and mechanism of Ru in serving as a Pd substitute using 2,4,6-trichlorophenol (TCP) as a model pollutant. Up to 99.8% TCP removal efficiency and 99% selectivity to cyclohexanol, a value-added compound with an extremely low toxicity, were achieved on the Ru electrode. In contrast, only 66% of TCP was removed on the Pd electrode, with almost no hydrosaturation selectivity. The superiority of Ru over Pd was especially noteworthy in alkaline conditions or the presence of interfering species such as S2-. The theoretical simulation demonstrates that Ru possesses a hydrodechlorination energy barrier of 0.72 eV, which is comparable to that on Pd. Meanwhile, hydrosaturation requires an activation energy of 0.69 eV on Ru, which is much lower than that on Pd (0.92 eV). The main reaction mechanism on Ru is direct electron transfer, which is distinct from that on Pd (indirect pathway via atomic hydrogen, H*). This work thereby provides new insights into designing cost-effective electrocatalysts for halogenated phenol detoxification and resource recovery.

Effects of electrical stimulation on purification of secondary effluent containing chlorophenols by denitrification biofilter.

The coexistence of chlorophenols (CPs) and total nitrogen (TN) is common in advanced purification of industrial secondary effluent, which brings challenges to conventional denitrification biofilters (DNBFs). Electrical stimulation is an effective method for the degradation of CPs, However, the application of electrical stimulation in DNBFs to enhance the treatment of secondary effluent containing CPs remains largely unknown. Herein, this study conducted a systematic investigation towards the effects of electrical stimulation on DNBF through eight lab-scale reactors at room and low temperatures and different hydraulic retention times (HRTs). Results showed that the electrical stimulation effect was not greatly affected by temperature and the optimal applied voltage was 3 V. Overall, the removal rates of TN and CPs were increased by 114%-334% and 2.68%-34.79% respectively after electrical stimulation. When the influent concentration of NO3--N, COD and each CP of 25 mg/L, 50 mg/L and 5 mg/L, about 15 mg/L of effluent TN could be achieved and the removals of p-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol were increased by 10.58%, 5.78% and 34.79% respectively, under the voltage of 3 V and HRT of 4 h. However, the reduction rate of biotoxicity was decreased and could not achieve low toxicity grade in general. Electrical stimulation promoted the elevation of Hydrogenophaga and thus enhanced the removal of TN, and the increase of Microbacterium and Ahniella was significantly associated with the improvement of CPs removal rate. In addition, the obvious accumulation of nitrite was found to be significantly negatively correlated with the abundance of Nitrospira. This study highlighted a further need for the optimization of electrical stimulation in DNBFs treating industrial secondary effluent containing CPs to achieve the goal of pollutant removal and toxicity reduction simultaneously.

Miniaturized ternary deep eutectic solvent-based matrix solid-phase dispersion: A green sample preparation method for the determination of chlorophenols in river sediment.

New ternary deep eutectic solvents were prepared and applied as efficient green dispersing solvents in miniaturized matrix solid-phase dispersion to extract chlorophenols from river sediments for the first time. High-performance liquid chromatography coupled with a photodiode array detector was used to analyze the target analytes. The significant factors affecting the extraction were optimized as follows: dispersant (100 mg), sample (100 mg), ternary eutectic solvents (150 µl), grinding for 1 min, 450 µl of acetonitrile as the elution solvent, and vortex mixing for 20 s. Under the optimal conditions, the method exhibited excellent linearity (correlation coefficient > 0.9980), low limits of detection between 1.039-2.478 µg/g, and extraction recoveries between 93.9% and 99.2%. Furthermore, the method demonstrated excellent precision in the intra- and inter-day analysis with a relative standard deviation below 6%. When compared to conventional extraction techniques, the miniaturized matrix solid-phase dispersion considerably reduced samples and solvent usag, offering important environmental benefits. The green profile of the method was assessed using the complementary green analytical procedure index tool confirming its eco-friendship. The technique was finally employed to evaluate sediment samples from three distinct locations along the Zuibaiji River, indicating its applicability for monitoring environmental samples.

Effective biodegradation of chlorophenols, sulfonamides, and their mixtures by bacterial laccase immobilized on chitin.

Coexisting multi-pollutants like sulfonamides (SAs) and chlorophenols (CPs) in the ecological environment pose a potential risk to living organisms. The development of a strategy for the effective removal of multiple pollutants has become an urgent need. Herein, we systematically investigated the potential of immobilized bacterial laccase to remove chlorophenols (CPs), sulfonamides (SAs), and their mixtures. Laccase from Bacillus pumilus ZB1 was efficiently immobilized on chitin and its thermal stability, pH stability, and affinity to substrates were improved. Reusability assessment showed the immobilized laccase retained 75.5% of its initial activity after five cycles. The removal efficiency of CPs and SAs by immobilized laccase was significantly improved compared with that of free laccase. In particular, the removal of 2,4-dichlorophenol and 2,4,6-trichlorophenol reached 96.9% and 89.3% respectively within 8 h. The immobilized laccase could remove 63.70% of 2,4-dichlorophenol after four cycles. The degradation pathways of 2,4-dichlorophenol and sulfamethazine were proposed via LC/MS analysis. When the co-pollutants containing 2,4,6-trichlorophenol and sulfamethoxazole, immobilized laccase showed 100% removal of 2,4,6-trichlorophenol and 38.71% removal of sulfamethoxazole simultaneously. Cytotoxicity and phytotoxicity tests indicated that immobilized laccase can alleviate the toxicity of co-pollutants. The results demonstrate that chitin-based laccase immobilization can be an effective strategy for the removal of SAs, CPs, and their co-pollutants.

N-rich hypercrosslinked porous polymers for highly efficient preconcentration and sensitive detection of chlorophenols.

Three novel N-rich hypercrosslinked porous polymers (NHCP1, NHCP2, and NHCP3) were facilely developed using Friedel-Crafts alkylation. NHCP1 with a remarkably large surface area (2066 m2 g-1) showed the best adsorption performance for chlorophenol pollutants. A sensitive and simple method was developed by using NHCP1 as a sorbent for solid-phase extraction to preconcentrate several chlorophenols in honey, water, and peach beverage samples followed by determination using a high-performance liquid chromatography-ultraviolet detector. The detection wavelength was 280 nm. Under the optimized conditions, the linear ranges were 1.67-1000 ng g-1 for honey, 0.170-100 ng mL-1 for water, and 0.330-100 ng mL-1 for peach beverage samples. The detection limits (S/N = 3) were 0.500-2.00 ng g-1, 0.0500-0.100 ng mL-1, and 0.100-0.200 ng mL-1, respectively. Recovery values were 89.3-111% with relative standard deviations <9.4%. The proposed extraction/preconcentration and quantitative analysis method provides an affordable and effective alternative for the preconcentration and determination of low levels of chlorophenols in real samples.

Incorporation of carbon black into a sonogel matrix: improving antifouling properties of a conducting polymer ceramic nanocomposite.

A new electrochemical sensor device has been developed through the modification of a polyaniline-silicon oxide network with carbon black (CB). Enhanced electrical conductivity and antifouling properties have been achieved due to the integration of this cheap nanomaterial into the bulk of the sensor. The structure of the developed material was characterized using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy techniques. Cyclic voltammetry was used to characterize electrochemically the Sonogel-Carbon/Carbon Black-PANI (SNG-C/CB-PANI) sensor device. In addition, differential pulse voltammetry was employed to evaluate the analytical response of the sensor towards sundry chlorophenols, common environmental hazards in aqueous ecosystems. The modified sensor material showed excellent antifouling properties, which led to a better electroanalytical performance than the one displayed with the bare sensor. Notably, a sensitivity of 5.48 × 103 µA mM-1 cm-2 and a limit of detection of 0.83 µM were obtained in the determination of 4-chloro-3-methylphenol (PCMC) at a working potential of 0.78 V (vs. 3 M Ag/AgCl/KCl), along with proficient values of reproducibility and repeatability (relative standard deviation < 3%). Finally, the analysis of PCMC was carried out in multiple validated water samples using the synthesized SNG-C/CB-PANI sensor device, obtaining excellent results of recovery values (97-104%). The synergetic effect of polyaniline and carbon black leads to novel antifouling and electrocatalytic effects that improve the applicability of this sensor in sample analysis versus complex conventional devices.

A comprehensive review of chlorophenols: Fate, toxicology and its treatment.

Chlorophenols represent one of the most abundant families of toxic pollutants emerging from various industrial manufacturing units. The toxicity of these chloroderivatives is proportional to the number and position of chlorine atoms on the benzene ring. In the aquatic environment, these pollutants accumulate in the tissues of living organisms, primarily in fishes, inducing mortality at an early embryonic stage. Contemplating the behaviour of such xenobiotics and their prevalence in different environmental components, it is crucial to understand the methods used to remove/degrade the chlorophenol from contaminated environment. The current review describes the different treatment methods and their mechanism towards the degradation of these pollutants. Both abiotic and biotic methods are investigated for the removal of chlorophenols. Chlorophenols are either degraded through photochemical reactions in the natural environment, or microbes, the most diverse communities on earth, perform various metabolic functions to detoxify the environment. Biological treatment is a slow process because of the more complex and stable structure of pollutants. Advanced Oxidation Processes are effective in degrading such organics with enhanced rate and efficiency. Based on their ability to generate hydroxyl radicals, source of energy, catalyst type, etc., different processes such as sonication, ozonation, photocatalysis, and Fenton's process are discussed for the treatment or remediation efficiency towards the degradation of chlorophenols. The review entails both advantages and limitations of treatment methods. The study also focuses on reclamation of chlorophenol-contaminated sites. Different remediation methods are discussed to restore the degraded ecosystem back in its natural condition.

Degradation and Extraction of Organochlorine Pollutants from Environmental Solids under Subcritical Water Conditions.

A subcritical water degradation and extraction method was developed to remediate environmental soils contaminated by highly recalcitrant organochlorine pollutants. Hydrogen peroxide was used to effectively decompose organochlorine pollutants under subcritical water conditions. As a method optimization study, the static wet oxidation of chlorophenols was first performed in subcritical water with and without added hydrogen peroxide. Complete oxidation was achieved using an added oxidant, and thus, the oxidation and extraction of chlorophenols from a sand matrix was then attempted. Complete oxidation and extraction with added oxidant were achieved within 30 min at 100 °C. We then investigated the subcritical water degradation and extraction of dieldrin, mirex, and p,p'-DDD. These organochlorine pesticides were not as easily oxidized as the chlorophenols, and the benefit of adding hydrogen peroxide was only clearly observed at 200 °C. Approximately a 20% increase in degradation was noted for each pesticide and insecticide at this temperature. Unfortunately, this difference was not observed with an increase in temperature to 250 °C, except in some cases, where the amount of degradation byproducts was reduced. Dieldrin and p,p'-DDD were essentially destroyed at 250 °C, while all the pesticides and the insecticides were completely removed from the sand at this temperature. The proposed method was then used to remediate a soil sample highly contaminated with DDT. The soil was obtained from the grounds of an old DDT mixing facility in Virginia and has been aging for several decades. Not only was 100% removal of DDT from this soil achieved using the proposed method at 250 °C, but also, the extracted DDT was completely destroyed during the process. The proposed remediation method, therefore, demonstrates a high potential as an efficient and environmentally sound technique for the detoxification of soils.

Development of methods based on low-temperature partitioning (LTP) for monitoring cresols and chlorophenols in sewage sludge, soil, and water in column leaching.

Cresols and chlorophenols are chemical contaminants that are potentially toxic to humans and can be found in sewage sludge. These chemical contaminants can migrate into the sludge-soil-water system when sludge is used as a conditioner for agricultural soils. Thus, the objective of this study was to develop methodologies based on extraction with low-temperature partitioning (LTP) to determine cresols and chlorophenols in sewage sludge, soil, and water. The analysis was performed by gas chromatography coupled with mass spectrometry (GC-MS). The validated methods were applied to monitor cresols and chlorophenols in a column-leaching study of a sludge-soil-water system. Satisfactory results were achieved for selectivity, limit of quantification (LOQ), linearity, accuracy, and precision. In the column leaching study, only 2,4,6-trichlorophenol was quantified in sludge samples after 20 days of the experiment. None of the studied compounds were quantified in soil and leached water samples, due to the degradation promoted by the microorganisms present in the sewage sludge. Finally, validated methods were suitable for monitoring cresols and chlorophenols in the sludge-soil-water system.

Single bubble in-tube microextraction coupled with capillary electrophoresis.

Headspace (HS) extraction is a sample pretreatment technique for volatile and semivolatile organic compounds in a complex matrix. Recently, in-tube microextraction (ITME) coupled with CE using an acceptor plug placed in the capillary inlet was developed as a simple but powerful HS extraction method. Here, we present single bubble (SB) ITME using a bubble hanging to the capillary inlet immersed in a sample donor solution as a HS of submicroliter volume (∼200 nL). The analytes evaporated to the bubble were extracted into the acceptor phase through the capillary opening, then electrophoresis of the enriched extract was carried out. Since the bubble volume was much smaller than a conventional HS volume (∼1 mL), it was filled with the evaporated analytes rapidly and the analytes could be enriched much faster compared to conventional HS-ITME. Owing to the high surface-to-volume ratio of the SB, 5 min SB-ITME yielded the enrichment factor values similar to those of 10 min HS-ITME. When 5 min SB-ITME at room temperature was applied to a tap water sample, the enrichment factors of 2,4,6-trichlorophenol (TCP), 2,3,6-TCP, and 2,6-dichlorophenol were 53, 41, and 60, respectively, and the LOQs obtained by monitoring the absorbance at 214 nm were 5.6-8.3 ppb, much lower than 200 ppb, the World Health Organization guideline for the maximum permissible concentration of 2,4,6-TCP in drinking water.

Synthesis and characterisation of acid/basic modified adsorbents. Application for chlorophenols removal.

A commercial activated carbon was modified with acid and basic reagents -an acidic one via treatment with sulphuric acid and a basic via treatment with pentaethylenehexamine- to yield adsorbents with different surface acid/base character. These modified adsorbents were characterised by elemental and immediate analysis, N2 adsorption, XPS and point zero charge measurements. The new adsorbents were tested for chlorophenols removal in water (4-chlorophenol, 3,5-dichlorophenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol) at different temperatures. Although the calculated process enthalpy was positive for all cases, indicating an endothermic process, the entropy was positive, resulting in a negative Gibbs free energy and spontaneous process. The adsorption capacity increases with temperature and decreases when the phenols' number of substituents increases. The modified acid-activated carbon demonstrated an exciting higher adsorbing capacity from 426.9 to 742.3 mg g-1 for 2,4,6-trichlorophenol, whereas the adsorption capacity for the basic ranged between 142.9 and 238.0 mg g-1. The Langmuir model satisfactorily fitted the adsorption equilibrium data for all chlorophenol contaminants.

The Homogeneous Gas-Phase Formation Mechanism of PCNs from Cross-Condensation of Phenoxy Radical with 2-CPR and 3-CPR: A Theoretical Mechanistic and Kinetic Study.

Chlorophenols (CPs) and phenol are abundant in thermal and combustion procedures, such as stack gas production, industrial incinerators, metal reclamation, etc., which are key precursors for the formation of polychlorinated naphthalenes (PCNs). CPs and phenol can react with H or OH radicals to form chlorophenoxy radicals (CPRs) and phenoxy radical (PhR). The self-condensation of CPRs or cross-condensation of PhR with CPRs is the initial and most important step for PCN formation. In this work, detailed thermodynamic and kinetic calculations were carried out to investigate the PCN formation mechanisms from PhR with 2-CPR/3-CPR. Several energetically advantageous formation pathways were obtained. The rate constants of key elementary steps were calculated over 600~1200 K using the canonical variational transition-state theory (CVT) with the small curvature tunneling (SCT) contribution method. The mechanisms were compared with the experimental observations and our previous works on the PCN formation from the self-condensation of 2-CPRs/3-CPRs. This study shows that naphthalene and 1-monochlorinated naphthalene (1-MCN) are the main PCN products from the cross-condensation of PhR with 2-CPR, and naphthalene and 2-monochlorinated naphthalene (2-MCN) are the main PCN products from the cross-condensation of PhR with 3-CPR. Pathways terminated with Cl elimination are preferred over those terminated with H elimination. PCN formation from the cross-condensation of PhR with 3-CPR can occur much easier than that from the cross-condensation of PhR with 2-CPR. This study, along with the study of PCN formation from the self-condensation 2-CPRs/3-CPRs, can provide reasonable explanations for the experimental observations that the formation potential of naphthalene is larger than that of 1-MCN using 2-CP as a precursor, and an almost equal yield of 1-MCN and 2-MCN can be produced with 3-CP as a precursor.

Combined Analytical Study on Chemical Transformations and Detoxification of Model Phenolic Pollutants during Various Advanced Oxidation Treatment Processes.

Advanced oxidation processes (AOPs) have been introduced to deal with different types of water pollution. They cause effective chemical destruction of pollutants, yet leading to a mixture of transformation by-products, rather than complete mineralization. Therefore, the aim of our study was to understand complex degradation processes induced by different AOPs from chemical and ecotoxicological point of view. Phenol, 2,4-dichlorophenol, and pentachlorophenol were used as model pollutants since they are still common industrial chemicals and thus encountered in the aquatic environment. A comprehensive study of efficiency of several AOPs was undertaken by using instrumental analyses along with ecotoxicological assessment. Four approaches were compared: ozonation, photocatalytic oxidation with immobilized nitrogen-doped TiO2 thin films, the sequence of both, as well as electrooxidation on boron-doped diamond (BDD) and mixed metal oxide (MMO) anodes. The monitored parameters were: removal of target phenols, dechlorination, transformation products, and ecotoxicological impact. Therefore, HPLC-DAD, GC-MS, UHPLC-MS/MS, ion chromatography, and 48 h inhibition tests on Daphnia magna were applied. In addition, pH and total organic carbon (TOC) were measured. Results show that ozonation provides by far the most suitable pattern of degradation accompanied by rapid detoxification. In contrast, photocatalysis was found to be slow and mild, marked by the accumulation of aromatic products. Preozonation reinforces the photocatalytic process. Regarding the electrooxidations, BDD is more effective than MMO, while the degradation pattern and transformation products formed depend on supporting electrolyte.

Review on the hazardous applications and photodegradation mechanisms of chlorophenols over different photocatalysts.

Chlorophenols are very important environmental pollutants, which have created huge problems for both aquatic and terrestrial lives. Therefore, their removal needs urgent, effective, and advanced technologies to safeguard our environment for future generation. This review encompasses a comprehensive study of the applications of chlorophenols, their hazardous effects and photocatalytic degradation under light illumination. The effect of various factors such as pH and presence of different anions on the photocatalytic oxidation of chlorophenols have been elaborated comprehensively. The production of different oxidizing agents taking part in the photodegradation of chlorophenols are given a bird eye view. The photocatalytic degradation mechanism of different chlorophenols over various photocatalyts has been discussed in more detail and elaborated that how different photocatalysts degrade the same chlorophenols with the aid of different oxidizing agents produced during photocatalysis. Finally, a future perspective has been given to deal with the effective removal of these hazardous pollutants from the environment.

Electron-transfer-dominated non-radical activation of peroxydisulfate for efficient removal of chlorophenol contaminants by one-pot synthesized nitrogen and sulfur codoped mesoporous carbon.

Synergistic adsorption and oxidative degradation (via persulfate activation) on metal-free carbonaceous materials are expected to be environmentally friendly and highly efficient approach toward contaminants removal. Herein, nitrogen and sulfur codoped mesoporous carbon (NSDMC) were firstly synthesized via co-carbonization of calcium citrate and thiourea without any templates. NSDMC samples exhibit remarkably enhanced adsorption capacity and oxidative degradation (by activating PDS) for chlorophenols elimination. Increased SBET and introduced N-containing functional groups are beneficial for chlorophenols adsorption, PDS accessibility and successive activation. Doped sulfur species (especially for thiophenic S) can enhance the electron-transport performance of NSDMC, further promoting PDS activation and chlorophenols degradation. It can be ascribed to the synergistic effect of N and S codoping. NSDMC-30 (containing 5.83 at.% nitrogen and 2.15 at.% sulfur, and possessing SBET of 1935.9 m2 g-1) exhibits the optimal adsorption and catalytic oxidation capability for 4-CP removal. Degradation rate constant of NSDMC-30 is 0.125 min-1, which is 3.0 times and 7.8 times higher than nitrogen-doped MC and pristine MC, respectively. Radicals quenching experiments and EPR tests demonstrate that non-radical pathways play dominant role for PDS activation and chlorophenols degradation. Based on the influences of catalyst loading, initial 4-CP concentration, and PDS dosage on degradation kinetics of 4-CP, the pre-adsorption is unveiled to be the critical step determining oxidation rate of chlorophenols. More importantly, the results of in-situ Raman and electrochemical tests show that the surface-confined and activated PDS complex (carbon-PDS*) and continuous electron transfer from co-adsorbed 4-CP are mainly responsible for the oxidative degradation of chlorophenols. The intermediate products and TOC removal indicate that chlorophenols can be efficiently degraded and mineralized by as-synthesized NSDMC via activating PDS. Besides, the present NSDMC/PDS system is also applicable for purification of actual polluted water samples. This work provides in-depth knowledge of carbon-driven nonradical process for PDS activation and contaminants remediation.

In-situ formation of Zn-Al layered double oxides on electrochemically anodized nanoporous aluminum film as sorbent for chlorophenols extraction from water and wastewater followed by determination using HPLC.

Herein, we present a simple, cost-effective, and robust strategy for the in-situ preparation of Zn-Al layered double oxides-anodized aluminum thin film via a facile hydrothermal method, followed by calcination treatment of the Zn-Al layered double hydroxide in the air atmosphere. The in-situ prepared Zn-Al layered double oxide-anodized aluminum film was implemented as sorbent for thin film microextraction of four selected chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol), followed by high-performance liquid chromatography-ultraviolet detection. The different variables of the thin film microextraction were screened via Plackett-Burman design and then optimized through Box-Behnken design. Under the optimum condition, the method showed good linear ranges (0.2-200 µg/L) with the coefficient of determinations higher than 0.9938. The calculated limit of detections were between 0.07 and 0.56 µg/L. Relative standard deviations of the method for determination of the analytes at 5 µg/L concentration level (n = 3) were ranged from 3.5 to 3.9% (as interday). The enrichment factors were between 39 and 58. This extraction method was demonstrated to be fast, efficient, and convenient. To study the capability of the developed method for real sample analysis, tap, well, river, and two types of wastewater samples were satisfactorily analyzed.