RESUMEN
The dyeing industry effluent causes severe environmental pollution and threatens the native flora and fauna. The current study aimed to analyze the physicochemical parameters of dyeing industry wastewater collected in different sites (K1, E2, S3, T4, and V5), as well as the metal tolerance and decolourisation ability of Aspergillus flavus. Furthermore, the optimal biomass quantity and temperatures required for efficient bioremediation were investigated. Approximately five dyeing industry wastewater samples (K1, E2, S3, T4, and V5) were collected from various sampling stations, and the majority of the physical and chemical characteristics were discovered to be above the permissible limits. A. flavus demonstrated outstanding metal resistance to As, Cu, Cr, Zn, Hg, Pb, Ni, and Cd on Potato Dextrose Agar (PDA) plates at concentrations of up to 500 g mL-1. At 4 g L-1 concentrations, A. flavus biomass decolorized up to 11.2-46.5%. Furthermore, 35°C was found to be the optimal temperature for efficient decolourisation of A. flavus biomass. The toxicity of 35°C-treated wastewater on V. mungo and prawn larvae was significantly reduced. These findings indicate that the biomass of A. flavus can be used to decolorize dyeing industry wastewater.
Asunto(s)
Aspergillus flavus , Biodegradación Ambiental , Biomasa , Colorantes , Residuos Industriales , Aguas Residuales , Contaminantes Químicos del Agua , Aspergillus flavus/metabolismo , Aguas Residuales/química , Aguas Residuales/microbiología , Colorantes/química , Residuos Industriales/análisis , Contaminantes Químicos del Agua/análisis , Animales , Eliminación de Residuos Líquidos/métodos , Metales Pesados/análisis , Metales Pesados/toxicidad , LarvaRESUMEN
The leather manufacturing industry is increasingly embracing chrome-free tanning methods to promote environmental sustainability. However, the transition to chrome-free tanning systems presents a notable obstacle: the incompatibility of traditional anionic wet finishing materials with chrome-free tanned leather due to differences in surface electrical behavior. Herein, an amphoteric polymer, referred to P(AA-co-DMAEMA-co-DA), was synthesized through a simple one-step free radical copolymerization using acrylic acid (AA), dimethylaminoethyl methacrylate (DMAEMA), and dodecyl acrylate (DA). Notably, the isoelectric point of P(AA-co-DMAEMA-co-DA) is 7.7, which contributes to improving the leather's positive electric property and enhancing the binding between the amphoteric polymer fatliquors (APF) and collagen fiber. The APF achieves a remarkable absorption rate of 96.2% and a dyeing uptake rate of 94.3% for anionic dyes, resulting in a uniformly bright surface color of the dyed leather and further significantly reducing the dye usage. Overall, the comprehensive properties of APF align with the electrical origins of organic chrome-free tanning leather, exhibiting a pronounced fatliquoring effect while reducing the dye content in the waste liquor. This contribution holds promise for advancing chrome-free tanning technology toward greener environmental practices.
Asunto(s)
Polímeros , Curtiembre , Polímeros/química , Colorantes/química , Acrilatos/químicaRESUMEN
The agricultural processing industry produces a large amount of waste on a global scale whose disposal is simultaneously a nuisance and of special interest. The by-products are rich in bioactive phytoconstituents that might be beneficial to the production of bio-functional textiles. The present work uses agricultural wastes for the eco-friendly dyeing of woolen yarns. Response surface methodology based on 23- Central Composite Design was used to design experiments, evaluate the main dyeing parameters, develop efficient mathematical models to predict the dyeing process, and optimize the procedure. The quadratic regression models developed were found to be statistically significant using ANOVA, with R2 -value of 0.9734 and 0.9820 for color strength and lightness responses, respectively. Also, eye-soothing tone and hues with a good resistance to durability (4-5) and light (4) were achieved. The banana shell and gallnut bio-mordants improved UV protection by up to 25.33% and 59.79%, respectively. Generally speaking, the results showed that C. Oblonga leaf as well as gallnut and banana shells could be used as whole crop products in an ecologically sound textile dyeing process through a sustainable approach and that the proposed innovative application might serve as an attractive procedure for recycling and green waste management.
Asunto(s)
Agricultura , Reciclaje , Textiles , Colorantes/químicaRESUMEN
Most traditional synthetic dyes and functional reagents used in silk fabrics are not biodegradable and lack green environmental protection. Natural dyes have attracted more and more attention because of their coloring, functionalization effects, and environmental benefits. In this study, natural dyes were extracted from lac and used for coloring and functionalization in silk fabrics without any other harmful dyes. The extraction conditions were studied and analyzed by the univariate method. The optimal extraction process was that the volume ratio of ethanol to water was 60:40 with a solid-liquid ratio of 1:10, and reacting under the neutrality condition for 1 h at 70 °C. Silk fabric can be dyed dark owing to the certain lifting property of lac. After being dyed by Al3+ post-medium, the levels of the washing fastness, light fastness, and friction fastness of silk fabric are all above four with excellent fastness. The results show that the dyed silk fabrics have good UV protection, antioxidation, and antibacterial properties. The UV protection coefficient UPF is 42.68, the antioxidant property is 98.57%, and the antibacterial property can reach more than 80%. Therefore, the dyeing and functionalization of silk fabrics by utilizing naturally lac dyes show broad prospects in terms of the application of green sustainable dyeing and functionalization.
Asunto(s)
Colorantes , Seda , Textiles , Colorantes/química , Seda/química , Antibacterianos/química , Antibacterianos/farmacología , Antioxidantes/químicaRESUMEN
Tussah silk is one of the most widely used wild silks. It is usually dyed with acid dyes, despite the shortcoming of poor wet fastness. Reactive dyeing is a good solution to this problem. In our work, sulfatoethylsulfone (SES), sulfatoethylsulfone/monochlorotriazine (SES/MCT), monochlorotriazine (MCT), and bis(monochlorotriazine) (Bis(MCT)) dyes were used to dye tussah silk. All of these dyes showed lower exhaustion and fixation on tussah silk than on mulberry silk under alkaline conditions. Among them, SES dyes were more applicable, with a fixation of 70-85% (at 4%owf dye) at 90 °C when using sodium bicarbonate as an alkali. SES dyes also showed a rapid fixation speed. The dyeing of tussah silk required lower sodium bicarbonate dosage, the use of more neutral electrolytes, and a higher dye quantity to achieve deep effects compared to mulberry silk. Dyed tussah silk displayed lower apparent color depth and brilliance than dyed mulberry silk. The neutral boiling dyeing of tussah silk with SES dyes exhibited higher exhaustion, higher fixation (82-92% at 4%owf dye), and a slower fixation speed compared with alkaline dyeing. Furthermore, in this dyeing method, SES dyes showed higher and more efficient fixation on tussah silk than on mulberry silk. All dyed tussah silk had excellent color fastness to soaping.
Asunto(s)
Morus , Seda , Colorantes , Bicarbonato de SodioRESUMEN
BACKGROUND: Use of permanent hair dyes causes unintended oxidative damage during the short time frame of the dyeing process that leads to perceivable changes in the feel, manageability and appearance of hair. Moreover, after hair has been dyed, regular exposure to the sun as a key environmental stressor continues to stimulate additional oxidative damage and to induce newly developed hair colours to fade prematurely or undergo changes in colour quality. OBJECTIVE: To document the utility of acetyl zingerone methyl ether (MAZ) as a newly designed haircare ingredient to afford extra protection against oxidative damage and safeguard the integrity of hair colour. RESULTS: We demonstrate that MAZ is compatible chemically with the high alkaline conditions required for the colouring process and from theoretical calculations preferentially binds Fe and Cu ions relative to Ca or Zn ions. In model Fenton reactions MAZ effectively chelated active redox metals (Fe and Cu ions) in the presence of excess Ca+2 ions to inhibit the production of hydroxyl radicals, and in separate studies, MAZ neutralized singlet oxygen with greater efficiency than α-tocopherol by a factor of 2.5. When mixed into permanent dyes prior to hair tress application, MAZ significantly reduced combing forces, and SEM images led to substantial reductions in visual signs of surface damage. In a 28-day clinical study, relative to controls, mixing MAZ into hair dyes prior to application interfered neither with colour development nor with ability to cover grey hair and led to significant improvements in perceived attributes associated with hair's condition immediately following the dyeing process. Over a 28-day maintenance phase, especially between Day 14 and Day 28, continued use of shampoo and conditioner containing MAZ significantly preserved gloss measurements and hair colour in terms of longevity and colour quality as remaining desired and fresh compared to use of control shampoo and conditioner. CONCLUSION: This work establishes MAZ as a next-generation hair care ingredient for use in permanent dyes to attenuate oxidative damage and in shampoos and conditioners to promote longevity of hair colour and to maintain overall health and appearance of hair on a daily basis.
CONTEXTE: L'utilisation de colorants capillaires permanents provoque des dommages oxydatifs involontaires pendant la courte période du processus de teinture, ce qui entraîne des changements perceptibles dans la texture, la maniabilité et l'aspect des cheveux. De plus, après la teinture des cheveux, une exposition régulière au soleil comme facteur de stress environnemental clé continue de stimuler des dommages oxydatifs supplémentaires et d'induire une décoloration prématurée des nouvelles couleurs de cheveux ou des changements dans la qualité de la couleur. OBJECTIF: Documenter l'utilité de l'éther méthylique d'acétyl zingérone (MAZ) en tant qu'ingrédient de soin capillaire nouvellement conçu pour offrir une protection supplémentaire contre les dommages oxydatifs et sauvegarder l'intégrité de la couleur des cheveux. RÉSULTATS: Nous démontrons que le MAZ est chimiquement compatible avec les conditions alcalines élevées requises pour le processus de coloration et, d'après les calculs théoriques, lie de préférence les ions Fe et Cu aux ions Ca ou Zn. Dans les réactions de Fenton, le MAZ chélate efficacement les métaux redox actifs (atomes de Fe et de Cu) en présence d'un excès d'ions Ca+2 pour inhiber la production de radicaux hydroxyles et, dans des études séparées, le MAZ neutralise l'oxygène seul avec une efficacité supérieure à celle de l'αtocophérol, d'un facteur de 2.5. Lorsqu'il est mélangé à des teintures permanentes avant l'application de la coiffure, le MAZ réduit de manière significative les forces de peignage et, d'après les images SEM, conduit à des réductions substantielles des signes visuels de dommages à la surface. Dans une étude clinique de 28 jours, le mélange de MAZ dans les teintures capillaires avant l'application n'interfère pas avec le développement de la couleur ni avec la capacité à couvrir les cheveux gris et conduit à des améliorations significatives des attributs perçus associés à l'état des cheveux immédiatement après le processus de teinture. Au cours d'une phase d'entretien de 28 jours, en particulier entre le 14ème et le 28ème jour, l'utilisation continue du shampooing et de l'aprèsshampooing contenant du MAZ a permis de préserver de manière significative les mesures de brillance et la couleur des cheveux en termes de longévité et de qualité de la couleur, qui reste telle que désirée et nette, par rapport à l'utilisation du shampooing et de l'aprèsshampooing de contrôle. CONCLUSION: Ces travaux font du MAZ un ingrédient de nouvelle génération pour les soins capillaires, à utiliser dans les teintures permanentes pour atténuer les dommages oxydatifs et dans les shampooings, et aprèsshampooings pour promouvoir la longévité de la couleur des cheveux et maintenir la santé et l'apparence générales des cheveux au quotidien.
RESUMEN
The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water, energy, chemicals/dyes, and high generation of solid waste and effluents. Faced with environmental concerns, the textile ennoblement sector is the most critical of the textile production chain, especially the traditional dyeing processes. As an alternative to current problems, dyeing with supercritical CO2 (scCO2) has been presented as a clean and efficient process for a sustainable textile future. Supercritical fluid dyeing (SFD) has shown a growing interest due to its significant impact on environmental preservation and social, economic, and financial gains. The main SFD benefits include economy and reuse of non-adsorbed dyes; reduction of process time and energy expenditure; capture of atmospheric CO2 (greenhouse gas); use and recycling of CO2 in SFD; generation of carbon credits; water-free process; effluent-free process; reduction of CO2 emission and auxiliary chemicals. Despite being still a non-scalable and evolving technology, SFD is the future of dyeing. This review presented a comprehensive overview of the environmental impacts caused by traditional processes and confronted the advantages of SFD. The SFD technique was introduced, along with its latest advances and future perspectives. Financial and environmental gains were also discussed.
Asunto(s)
Dióxido de Carbono , Industria Textil , Colorantes , Tecnología , Textiles , Residuos Industriales/análisis , Eliminación de Residuos Líquidos/métodosRESUMEN
Natural pigments are becoming increasingly popular owing of their reliability. Microbial pigments provide an alternative to natural colours. A total of 24 fungal cultures were collected from leaf bits of Senna auriculata, with one strain (FNG1) producing an extracellular red orange pigment. Nigrospora oryzae was confirmed by using physical criteria and molecular phylogenetic study by using ITS and ß- tubulin analysis. In EtOAc, the crude red pigment was the most soluble. The TLC analysis was used to partly purify the natural pigment. The partially purified fungal pigment was used in successive bioprospecting studies. The antimicrobial activity of the partially purified sample was assessed against eight human pathogens, with Leucobacter AA7 showing the largest zone of inhibition (200-500 µg/mL). The compound's DPPH scavenging activity enhanced from 38.2 to 67.9%, with an IC50 value of 34.195 ± 2.33 µg/mL. Cancer cells were suppressed by partly pure fungal pigment, but non-cancerous HEK 293 cells were unaffected. The GC-MS analysis was used to characterize the molecule present in the partly purified pigment. In addition, the cotton textiles have the greatest staining capability for crude mycobial pigment, which dyes quickly and has a negative cytotoxicity. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-024-01211-y.
RESUMEN
Microplastic fibers from textiles have been known to significantly contribute to marine microplastic pollution. However, little is known about the microfiber formation and discharge during textile production. In this study, we have quantified microfiber emissions from one large and representative textile factory during different stages, spanning seven different materials, including cotton, polyester, and blended fabrics, to further guide control strategies. Wet-processing steps released up to 25 times more microfibers than home laundering, with dyeing contributing to 95.0% of the total emissions. Microfiber release could be reduced by using white coloring, a lower dyeing temperature, and a shorter dyeing duration. Thinner, denser yarns increased microfiber pollution, whereas using tightly twisted fibers mitigated release. Globally, wet textile processing potentially produced 6.4 kt of microfibers in 2020, with China, India, and the US as significant contributors. The study underlined the environmental impact of textile production and the need for mitigation strategies, particularly in dyeing processes and fiber choice. In addition, no significant difference was observed between the virgin polyesters and the used ones. Replacing virgin fibers with recycled fibers in polyester fabrics, due to their increasing consumption, might offer another potential solution. The findings highlighted the substantial impact of textile production on microfiber released into the environment, and optimization of material selection, knitting technologies, production processing, and recycled materials could be effective mitigation strategies.
Asunto(s)
Microplásticos , Plásticos , Textiles , Poliésteres , Ambiente , Industria TextilRESUMEN
The novel Palmatine (PLT)-based supramolecular salt palmatine-sulfosalicylic acid (PLT-SSA) was designed and synthesized, and its structures was determined by the single crystal X-ray diffraction. It is found that PLT-SSA exhibited enhancing thermodynamic stability, fluorescence intensity and emission lifetime in crystal state, which indicated that these structures and aromatic rings may give more overlap between the host-guest units and give rise to a long-lived charge-separated state. In addition, the dyeing properties and toxicity of these protoberberine alkaloid (BBC and PLTCl) and their supramolecular salts will be developed in this work used as yellow dyes for development multifunctional fabrics.
Asunto(s)
Alcaloides de Berberina , Alcaloides/farmacología , Alcaloides/química , Colorantes , Termodinámica , Alcaloides de Berberina/química , Alcaloides de Berberina/farmacologíaRESUMEN
Reactive red 2 (RR2) azo dye wastewater poses a serious hazard to the water environment health, so using a novel and efficient Electro- Ce(III) (E- Ce(III)) process takes on a critical significance in treating RR2 dye wastewater. In this study, the effects of a variety of single-factor conditions on RR2 removal efficiency were evaluated in depth. The results indicated that the optimal experimental conditions are as reaction temperature of 25 °C, Na2SO4 concentration of 25 mM, Ce(III) concentration of 0.3 mM, pH of 4.0, and current density of 40.0 mA/cm2. When the RR2 dye wastewater was treated for 40 min under the optimal experimental conditions, a high removal rate of 99.8% for RR2 was obtained. It is suggested that the background ion PO43- in the dye wastewater inhibits the E-Ce (III) process, whereas Cl- facilitates this process. Moreover, the yield of Ce(IV) increases with the increase of the current density. At the current density of 40.0 mA/cm2, a reasonable energy consumption of 3.85 kW h/gTOC for the process was obtained after the 3-h treatment. The effects of different degradation processes (including Direct Electrooxidation (DEO), single Ce(III), and E-Ce (III)) on RR2 removal efficiency and TOC change were compared. The types of oxidizing substances in the E-Ce (III) process were detected, and the mechanism of RR2 oxidative degradation in the E-Ce (III) process was summarized. The result suggests that the E-Ce (III) process has low power consumption. Meanwhile, in the E-Ce (III) process, free reactive Ce(IV) with strong oxidation is continuously generated, RR2 can be efficiently degraded. And the continuous cycle transformation between Ce(III) and Ce(IV) maintains the strong oxidation of the process. The contribution of free reactive Ce(IV) and DEO to RR2 degradation was obtained as 58.8% and 39.8%, respectively. The combined effect of Ce(IV) and DEO played a major role in the E-Ce (III) process, while ·OH exhibited a relatively weak effect (nearly 1.4%). RR2 was comprised of 13 major intermediates, and the biodegradability of wastewater was improved significantly after treatment, thus facilitating the further mineralization and biodegradation of the products. The E- Ce(III) process is novel, efficient, and environment-friendly, and has a large market application space, suggesting that it can be applied as an efficient, economic, and sustainable water treatment process.
Asunto(s)
Aguas Residuales , Contaminantes Químicos del Agua , Aguas Residuales/química , Colorantes/química , Naftalenosulfonatos , Compuestos Azo/química , Oxidación-Reducción , Contaminantes Químicos del Agua/análisisRESUMEN
BACKGROUND: The process of hair dyeing causes hair damage, and periodic re-dyeing is required for newly grown hair. To avoid these hassles, hair color shampoos have been developed and are widely used. In this study, we compared the effects of two hair color shampoos with different dyeing principles to analyze the function of hair color shampoos. We analyzed hair tresses treated by hair-oxidation- and hair-coating-based shampoos. MATERIALS AND METHODS: We measured the color, tensile properties, softness, elasticity, gloss, moisture content, and protein content of the hair tresses dyed with color shampoos. The hair structures were analyzed by scanning and transmission electron microscopies (SEM and TEM) and a hydroxy radical-based method. RESULTS: The shampoo based on hair coating enhanced the hair dyeing effect and roughness, whereas that based on hair oxidation improved the color retention and moisture content in the hair tresses. Frictional resistance, gloss, and elasticity of the hair tresses were similar for the two products. However, according to the results of the protein loss test, TEM, and hydroxyl radical staining, the shampoo based on hair oxidation showed a longer dyeing retention compared to that based on hair coating but caused cuticle damage. CONCLUSION: These results show that the two shampoos with different dyeing principles exhibit different hair dyeing abilities and hair health indices. Therefore, we recommend that hair color shampoos should be used according to the requirements of an individual.
Asunto(s)
Preparaciones para el Cabello , Humanos , Preparaciones para el Cabello/farmacología , Colorantes/análisis , Cabello/química , Proteínas/metabolismoRESUMEN
Clays are considered great nanoadsorbents for many materials, including textile dyes. The use of these materials for cleaning textile wastewater is well known; however, it is not at all common to find applications for the hybrid materials formed from the clay and dye. In this work, a dye-loaded clay material was used to make new dye baths and colour a polyester textile substrate. The same hybrid could be used several times as it did not use all the adsorbed dye in a single dyeing. The hybrid obtained from hydrotalcite (nanoclay) and the dispersed red 1 dye was analysed by measuring the colour obtained, carrying out an X-ray diffraction analysis that provided information after each desorption-dyeing process, and using infrared spectroscopy to analyse the specific bands of each characteristic group. Both analyses showed that the amount of dye present in the hybrid decreases. Thermogravimetry (TGA), surface area and porosity measurements (BET), and X-ray photoelectron spectroscopy (XPS) tests were conducted. Chemical stability was assessed by subjecting the hybrid to the actions of different reagents. In addition, colour fastness tests were carried out after dyeing and washing the polyester test tubes to check for the correct fixing of the dye to the fibre. These fastness results showed that the dyeing was carried out correctly and as if it was a conventional dyeing process.
Asunto(s)
Colorantes , Textiles , Colorantes/química , Arcilla , PoliésteresRESUMEN
Textile effluents are among the most polluting industrial effluents in the world. Textile finishing processes, especially dyeing, discharge large quantities of waste that is difficult to treat, such as dyes. By recovering this material from the water, in addition to cleaning and the possibility of reusing the water, there is the opportunity to reuse this waste as a raw material for dyeing different textile substrates. One of the lines of reuse is the use of hybrid nanoclays obtained from the adsorption of dyes, which allow dye baths to be made for textile substrates. This study analyses how, through the use of the nanoadsorbent hydrotalcite, dyes classified by their charge as anionic, cationic and non-ionic can be adsorbed and recovered for successful reuse in new dye baths. The obtained hybrids were characterised by X-ray diffraction and infrared spectroscopy. In addition, the colour was analysed by spectrophotometer in the UV-VIS range. The dyes made on cotton, polyester and acrylic fabrics are subjected to different colour degradation tests to assess their viability as final products, using reflection spectroscopy to measure the colour attribute before and after the tests, showing results consistent with those of a conventional dye.
Asunto(s)
Colorantes , Industria Textil , Colorantes/química , Espectrofotometría Infrarroja , AguaRESUMEN
In this study, magnetic CoMoO4/CoFe2O4 (CMO/CFO) nanospheres with a core-shell structure were synthesized via two-step hydrothermal methods. The obtained particles were employed as catalysts to activate peroxymonosulfate (PMS) and degrade methylene blue (MB). The physico-chemical characterizations of the synthesized CMO/CFO showed that the CMO shell contributed to the enhancement of redox conversion and the increase in the concentration of oxygen vacancies (OVs). By examining reactive oxygen species (ROS) in the CMO/CFO/PMS system, the MB degradation was dominated by a non-radical pathway, and 1O2 was identified as the most abundant ROS. Besides, the CMO/CFO exhibited faster reaction kinetics than the pristine CFO. Moreover, the magnetic properties guaranteed the recycling and reuse of CMO/CFO, and the removal rate of MB was maintained at â¼94% after continuous use five times. Both the tolerance to SO42-and the wide pH range where the material is applicable make it a promising catalyst for dyeing wastewater treatment.
Asunto(s)
Azul de Metileno , Peróxidos , Azul de Metileno/química , Especies Reactivas de Oxígeno , Peróxidos/química , Fenómenos MagnéticosRESUMEN
Serratia marcescens strain UCCM 00009 produced a mixture of gelatinase and keratinase to facilitate feather degradation but concomitant production of prodigiosin could make waste feather valorization biotechnologically more attractive. This article describes prodigiosin fermentation through co-valorization of waste feather and waste frying peanut oil by S. marcescens UCCM 00009 for anticancer, antioxidant, and esthetic applications. The stochastic conditions for waste feather degradation (WFD), modeled by multi-objective particle swarm-embedded-neural network optimization (ANN-PSO), revealed a gelatinase/keratinase ratio of 1.71 for optimal prodigiosin production and WFD. Luedeking-Piret kinetics revealed a non-exclusive, non-growth-associated prodigiosin yield of 9.66 g/L from the degradation of 88.55% waste feather within 96 h. The polyethylene glycol (PEG) 6000/Na+ citrate aqueous two-phase system-purified serratiopeptidase demonstrated gelatinolytic and keratinolytic activities that were stable for 240 h at 55 °C and pH 9.0. In vitro evaluations revealed that the prodigiosin inhibited methicillin-resistant Staphylococcus aureus at IC50 of 4.95 µg/mL, the plant-pathogen, Sclerotinia sclerotiorum, at IC50 of 2.58 µg/mL, breast carcinoma at IC50 of 0.60 µg/mL and 2,2-diphenyl-1-picryl-hydrazyl hydrate (DPPH) free-radical at IC50 of 96.63 µg/mL). The pigment also demonstrated commendable textile dyeing potential of fiber and cotton fabrics. The technology promises cost-effective prodigiosin development through sustainable waste feather-waste frying oil co-management.
Asunto(s)
Staphylococcus aureus Resistente a Meticilina , Prodigiosina , Animales , Plumas , Heurística , Serratia marcescensRESUMEN
The application of plant dyes in the textile industry has been very limited due to their limited sources, incomplete color space, and narrow color gamut, etc. Therefore, studies of the color properties and color gamut of natural dyes and the corresponding dyeing processes are essential for completing the color space of natural dyes and their application. In this study, water extract from the bark of Phellodendron amurense (P. amurense) was used as a dye. Dyeing properties, color gamut, and color evaluation of dyed cotton fabrics were studied, and optimal dyeing conditions were obtained. The results showed that the optimal dyeing process was pre-mordanting with liquor ratio at 1:50, P. amurense dye concentration at 5.2 g/L, mordant concentration (aluminum potassium sulfate) at 5 g/L, dyeing temperature at 70 °C, dyeing time of 30 min, mordanting time of 15 min, and pH 5. Through the optimization of the dyeing process, a maximum color gamut range was obtained with lightness L* value from 74.33 to 91.23, a* value from -0.89 to 2.96, b* value from 4.62 to 34.08, chroma C* value from 5.49 to 34.09, and hue angle h° value from 57.35° to 91.57°. Colors from light yellow to dark yellow were obtained, among which 12 colors were identified according to the Pantone Matching Systems. The color fastness against soap-washing, rubbing, and sunlight on the dyed cotton fabrics all reached grade 3 level or above, further expanding the applicability of natural dyes.
RESUMEN
The dyeing and finishing step represents a clear hotspot in the textile supply chain as the wet processing stages require significant amounts of water, energy, and chemicals. In order to tackle environmental issues, natural dyes are gaining attention from researchers as more sustainable alternatives to synthetic ones. This review discusses the topic of natural dyes, providing a description of their main features and differences compared to synthetic dyes, and encompasses a summary of recent research in the field of natural dyes with specific reference to the following areas of sustainable innovation: extraction techniques, the preparation of substrates, the mordanting process, and the dyeing process. The literature review showed that promising new technologies and techniques have been successfully employed to improve the performance and sustainability of natural dyeing processes, but several limitations such as the poor fastness properties of natural dyes, their low affinity with textiles substrates, difficulties in the reproducibility of shades, as well as other factors such as cost-effectiveness considerations, still prevent industry from adopting natural dyes on a larger scale and will require further research in order to expand their use beyond niche applications.
RESUMEN
Trace element concentrations and isotope ratios of hair reflect the blood levels at the time of hair formation, but can be affected by external factors such as dyeing, bleaching, and bathing. To investigate the effect of dyeing, bleaching, and bathing on hair, hair was immersed in tap water, and changes in trace element concentrations and the Sr isotope ratio were observed over time. During soaking, alkaline earth metals (Ca, Mg, and Sr) from tap water were gradually absorbed into the hair over time. After about one day, the adsorption capacity of hair reached a maximum and the reverse reaction started to occur. In contrast, alkaline metals (Na and K) behaved in reverse. In dyed and bleached hair, Na was significantly desorbed from the hair and gradually migrated to the water over time. The adsorption and desorption of trace elements were minimal in untreated original hair, but much higher in dyed and bleached hair. Thus, dyeing and bleaching appear to damage the hair surface structure and greatly promote the exchange of trace elements. The rapid exchange of trace elements, including Sr, between hair and tap water observed in this study indicates that hair samples can be easily contaminated during bathing.
Asunto(s)
Oligoelementos , Humanos , Oligoelementos/análisis , Colorantes , Metales/análisis , Cabello/química , Agua/análisis , Sodio/análisisRESUMEN
Wastewater from the textile industry dyeing process containing high loads of synthetic dyes leads to pollution of water with these toxic and genotoxic dyes. Much effort has been put towards developing biological systems to resolve this issue. Mycoremediation is a well-known approach using fungi to remove, degrade, or remediate pollutants and can be applied to decolorize textile dyes in industrial effluent. Fungal strains from four genera of Polyporales, namely Coriolopsis sp. TBRC 2756, Fomitopsis pinicola TBRC-BCC 30881, Rigidoporus vinctus TBRC 6770, and Trametes pocas TBRC-BCC 18705, were studied for decolorization efficiency, and R. vinctus was found to exhibit the greatest activity in removing all seven tested reactive dyes and one acid dye with a decolorization efficiency of 80% or more within 7 days under limited oxygen. This fungus simultaneously degraded multiple dyes in synthetic wastewater as well as industrial effluent from the dyeing process. To enhance the decolorization rate, various fungal consortia were formulated for testing. However, these consortia only trivially improved efficiency compared with using R. vinctus TBRC 6770 alone. Evaluation of R. vinctus TBRC 6770 decolorization ability was further performed in a 15-L bioreactor to test its ability to eliminate multiple dyes from industrial effluent. The fungus took 45 days to adapt to growth in the bioreactor and subsequently reduced dye concentration to less than 10% of the initial concentration. The following six cycles required only 4-7 days to reduce dye concentrations to less than 25%, demonstrating that the system can run efficiently for multiple cycles without the need for extra medium or other carbon sources.