Noninvasive Deep Brain Stimulation via Temporally Interfering Electric Fields.

We report a noninvasive strategy for electrically stimulating neurons at depth. By delivering to the brain multiple electric fields at frequencies too high to recruit neural firing, but which differ by a frequency within the dynamic range of neural firing, we can electrically stimulate neurons throughout a region where interference between the multiple fields results in a prominent electric field envelope modulated at the difference frequency. We validated this temporal interference (TI) concept via modeling and physics experiments, and verified that neurons in the living mouse brain could follow the electric field envelope. We demonstrate the utility of TI stimulation by stimulating neurons in the hippocampus of living mice without recruiting neurons of the overlying cortex. Finally, we show that by altering the currents delivered to a set of immobile electrodes, we can steerably evoke different motor patterns in living mice.

Impact of specific electromagnetic radiation on wakefulness in mice.

Electromagnetic radiation (EMR) in the environment, particularly in the microwave range, may constitute a public health concern. Exposure to 2.4 GHz EMR modulated by 100 Hz square pulses was recently reported to markedly increase wakefulness in mice. Here, we demonstrate that a similar wakefulness increase can be induced by the modulation frequency of 1,000 Hz, but not 10 Hz. In contrast to the carrier frequency of 2.4 GHz, 935 MHz EMR of the same power density has little impact on wakefulness irrespective of modulation frequency. Notably, the replacement of the 100 Hz square-pulsed modulation by sinusoidal-pulsed modulation of 2.4 GHz EMR still allows a marked increase of wakefulness. In contrast, continuous sinusoidal amplitude modulation of 100 Hz with the same time-averaged power output fails to trigger any detectable change of wakefulness. Therefore, alteration of sleep behavior by EMR depends upon not just carrier frequency but also frequency and mode of the modulation. These results implicate biological sensing mechanisms for specific EMR in animals.

Comparison of copper and graphene-assembled films in 5G wireless communication and THz electromagnetic-interference shielding.

Since first developed, the conducting materials in wireless communication and electromagnetic interference (EMI) shielding devices have been primarily made of metal-based structures. Here, we present a graphene-assembled film (GAF) that can be used to replace copper in such practical electronics. The GAF-based antennas present strong anticorrosive behavior. The GAF ultra-wideband antenna covers the frequency range of 3.7 GHz to 67 GHz with the bandwidth (BW) of 63.3 GHz, which exceed ~110% than the copper foil-based antenna. The GAF Fifth Generation (5G) antenna array features a wider BW and lower sidelobe level compared with that of copper antennas. EMI shielding effectiveness (SE) of GAF also outperforms copper, reaching up to 127 dB in the frequency range of 2.6 GHz to 0.32 THz, with a SE per unit thickness of 6,966 dB/mm. We also confirm that GAF metamaterials exhibit promising frequency selection characteristics and angular stability as flexible frequency selective surfaces.

Supercurrent diode effect and finite-momentum superconductors.

SignificanceOur work shows a fascinating application of finite-momentum superconductivity, the supercurrent diode effect, which is being reported in a growing number of experiments. We show that, under external magnetic field, Cooper pairs can acquire finite momentum so that critical currents in the direction parallel and antiparallel to the Cooper pair momentum become unequal.

Robust and Environmentally Friendly MXene-Based Electronic Skin Enabling the Three Essential Functions of Natural Skin: Perception, Protection, and Thermoregulation.

The development of electronic skin (e-skin) emulating the human skin's three essential functions (perception, protection, and thermoregulation) has great potential for human-machine interfaces and intelligent robotics. However, existing studies mainly focus on perception. This study presents a novel, eco-friendly, mechanically robust e-skin replicating human skin's three essential functions. The e-skin is composed of Ti3C2Tx MXene, polypyrrole, and bacterial cellulose nanofibers, where the MXene nanoflakes form the matrix, the bacterial cellulose nanofibers act as the filler, and the polypyrrole serves as a conductive "cross-linker". This design allows customization of the electrical conductivity, microarchitecture, and mechanical properties, integrating sensing (perception), EMI shielding (protection), and thermal management (thermoregulation). The optimal e-skin can effectively sense various motions (including minuscule artery pulses), achieve an EMI shielding efficiency of 63.32 dB at 78 µm thickness, and regulate temperature up to 129 °C in 30 s at 2.4 V, demonstrating its potential for smart robotics in complex scenarios.

Atomic Valence Reversal-Induced Polarization Resonance Spurs Highly Efficient Electromagnetic Wave Absorption in α-Fe2O3@Carbon Microtubes.

Variegation and complexity of polarization relaxation loss in many heterostructured materials provide available mechanisms to seek a strong electromagnetic wave (EMW) absorption performance. Here we construct a unique heterostructured compound that bonds α-Fe2O3 nanosheets of the (110) plane on carbon microtubes (CMTs). Through effective alignment between the Fermi energy level of CMTs and the conduction band position of α-Fe2O3 nanosheets at the interface, we attain substantial polarization relaxation loss via novel atomic valence reversal between Fe(III) ↔ Fe(III-) induced with periodic electron injection from conductive CMTs under EMW irradiation to give α-Fe2O3 nanosheets. Such heterostructured materials possess currently reported minimum reflection loss of -84.01 dB centered at 10.99 GHz at a thickness of 3.19 mm and an effective absorption bandwidth (reflection loss ≤ -10 dB) of 7.17 GHz (10.83-18 GHz) at 2.65 mm. This work provides an effective strategy for designing strong EMW absorbers by combining highly efficient electron injection and atomic valence reversal.

A Bioinspired Gradient Design Strategy for Cellulose-Based Electromagnetic Wave Absorbing Structural Materials.

Cellulose nanofiber (CNF) possesses excellent intrinsic properties, and many CNF-based high-performance structural and functional materials have been developed recently. However, the coordination of the mechanical properties and functionality is still a considerable challenge. Here, a CNF-based structural material is developed by a bioinspired gradient structure design using hollow magnetite nanoparticles and the phosphorylation-modified CNF as building blocks, which simultaneously achieves a superior mechanical performance and electromagnetic wave absorption (EMA) ability. Benefiting from the gradient design, the flexural strength of the structural material reached ∼205 MPa. Meanwhile, gradient design improves impedance matching, contributing to the high EMA ability (-59.5 dB) and wide effective absorption width (5.20 GHz). Besides, a low coefficient of thermal expansion and stable storage modulus was demonstrated as the temperature changes. The excellent mechanical, thermal, and EMA performance exhibited great potential for application in stealth equipment and electromagnetic interference protecting electronic packaging materials.

Genetic Transformation of Plasmid DNA into Escherichia coli Using High Frequency Electromagnetic Energy.

We present a novel technique of genetic transformation of bacterial cells mediated by high frequency electromagnetic energy (HF EME). Plasmid DNA, pGLO (5.4 kb), was successfully transformed into Escherichia coli JM109 cells after exposure to 18 GHz irradiation at a power density between 5.6 and 30 kW m-2 for 180 s at temperatures ranging from 30 to 40 °C. Transformed bacteria were identified by the expression of green fluorescent protein (GFP) using confocal scanning microscopy (CLSM) and flow cytometry (FC). Approximately 90.7% of HF EME treated viable E. coli cells exhibited uptake of the pGLO plasmid. The interaction of plasmid DNA with bacteria leading to transformation was confirmed by using cryogenic transmission electron microscopy (cryo-TEM). HF EME-induced plasmid DNA transformation was shown to be unique, highly efficient, and cost-effective. HF EME-induced genetic transformation is performed under physiologically friendly conditions in contrast to existing techniques that generate higher temperatures, leading to altered cellular integrity. This technique allows safe delivery of genetic material into bacterial cells, thus providing excellent prospects for applications in microbiome therapeutics and synthetic biology.

Supertough MXene/Sodium Alginate Composite Fiber Felts Integrated with Outstanding Electromagnetic Interference Shielding and Heating Properties.

The development of multifunctional MXene-based fabrics for smart textiles and portable devices has garnered significant attention. However, very limited studies have focused on their structure design and associated mechanical properties. Here, the supertough MXene fiber felts composed of MXene/sodium alginate (SA) fibers were fabricated. The fracture strength and bending stiffness of felts can be up to 97.8 MPa and 1.04 N mm2, respectively. Besides, the fracture toughness of felts was evaluated using the classic Griffith theory, yielding to a critical stress intensity factor of 1.79 MPam. In addition, this kind of felt presents outstanding electrothermal conversion performance (up to 119 °C at a voltage of 2.5 V), high cryogenic and high-temperature tolerance of photothermal conversion performance (-196 to 160 °C), and excellent electromagnetic interference (EMI) shielding effectiveness (54.4 dB in the X-band). This work provides new structural design concepts for high-performance MXene-based textiles, broadening their future applications.

Electromagnetic field-induced adaptive response in Schwann cells through DNA methylation, histone deacetylation, and oxidative stress.

Schwannomas are benign tumors of the peripheral nervous system arising from the transformation of Schwann cells (SCs). On the whole, these tumors are related to alterations of the neurofibromin type 2 gene, coding for the oncosuppressor merlin, a cytoskeleton-associated protein belonging to the ezrin-radixin-moesin family. However, the underlying mechanisms of schwannoma onset and progression are not fully elucidated, whereas one of the challenges might be the environment. In this light, the exposure to electromagnetic field (EMF), generated by the use of common electrical devices, has been defiantly suggested as the cause of SCs transformation even if the evidence was mostly epidemiologic. Indeed, insubstantial mechanisms have been so far identified to explain SCs oncotransformation. Recently, some in vitro evidence pointed out alterations in proliferation and migration abilities in SCs exposed to EMF (0.1 T, 50 Hz, 10 min). Here, we used the same experimental paradigma to discuss the involvement of putative epigenetic mechanisms in SCs adaptation to EMF and to explain the occurrence of hypoxic alterations after the exposure. Our findings indicate a set of environmental-induced changes in SCs, toward a less-physiological state, which may be pathologically relevant for the SCs differentiation and the schwannoma development.

Three-dimensional representation of the pure electric-dipole and the mixed first hyperpolarizabilities: The modified unit sphere representation.

In this work, the theory of the modified unit sphere representation (mUSR) has been proposed as a computational tool suitable for the three-dimensional representation of the pure electric-dipole [ ß λ µ ν ( - 2 ω ; ω , ω ) $$ {\beta}_{\lambda \mu \nu}\left(-2\omega; \omega, \omega \right) $$ ] as well as of the mixed electric-dipole/magnetic-dipole [ α J λ µ ν ( - 2 ω ; ω , ω ) $$ {}^{\alpha }{J}_{\lambda \mu \nu}\left(-2\omega; \omega, \omega \right) $$ and ß J λ µ ν ( - 2 ω ; ω , ω ) $$ {}^{\beta }{J}_{\lambda \mu \nu}\left(-2\omega; \omega, \omega \right) $$ ] or electric-dipole/electric-quadrupole [ α K λ µ ν o ( - 2 ω ; ω , ω ) $$ {}^{\alpha }{K}_{\lambda \mu \nu o}\left(-2\omega; \omega, \omega \right) $$ and ß K λ µ ν o ( - 2 ω ; ω , ω ) $$ {}^{\beta }{K}_{\lambda \mu \nu o}\left(-2\omega; \omega, \omega \right) $$ ] first hyperpolarizabilities. These five quantities are Cartesian tensors and they are responsible for the chiral signal in the chiroptical version of the hyper-Rayleigh scattering (HRS) spectroscopy, namely the HRS optical activity (HRS-OA) spectroscopy. For the first time, for each hyperpolarizability, alongside with the three-dimensional representation of the whole (i.e., reducible) Cartesian tensors, the mUSRs are developed for each of the irreducible Cartesian tensors (ICTs) that constitute them. This scheme has been applied to a series of three (chiral) hexahelicene molecules containing different degrees of electron-withdrawing (quinone) groups and characterized by the same (positive) handedness. For these molecules, the mUSR shows that, upon substitution, the most remarkable qualitative and semi-quantitative (enhancement of the molecular responses) effects are obtained for the pure electric-dipole and for the mixed electric-dipole/magnetic-dipole hyperpolarizabilities.

A Regulable Polyporous Graphite/Melamine Foam for Heat Conduction, Sound Absorption and Electromagnetic Wave Absorption.

To reduce electromagnetic interference and noise pollution within communication base stations and servers, it is necessary for electromagnetic wave absorption (EWA) materials to transition from coating to multifunctional devices. Up to now, the stable and effective integration of multiple functions into one material by a simple method has remained a large challenge. Herein, a foam-type microwave absorption device assembled with multicomponent organic matter and graphite powder is synthesized by a universal combination process. Melamine and phenolic aldehyde amine work as the skeleton and cementing compound, respectively, in which graphite is embedded in the cementing compound interconnected into the mesoscopic 3D electric conductive and heat conductive network. Interestingly, the prepared flexible graphite/melamine foam (CMF) delivers a great EWA performance, with a great effective absorption bandwidth of 9.8 GHz, ultrathin thickness of 2.60 mm, and a strong absorption reflection loss of -41.7 dB. Moreover, the CMF possesses porosity and flexibility, endowing it with sound absorption ability. The CMF is unique in its integration of EWA, heat conduction, sound absorption, and mechanical robustness, as well as its cost-effective and scalable manufacturing. These attributes make CMF promising as a multifunctional device widely used in communication base stations, servers, and chips protection.

AgNWs/Fe3O4@NC Conductive Network Hierarchical Assembly to Prepare Flexible EMI Shielding Textile.

With the rapid development of high-power electronic instruments and communication technology, efficient electromagnetic shielding materials with strong absorption of electromagnetic waves and low reflection characteristics have become the focus of the world's attention. This study designs and synthesizes N-doped carbon-coated hollow Fe3O4 nanospheres (Fe3O4@NC) by spraying Ag nanowires (AgNWs) on textiles as conductive networks. Because of the high permeability and hollow structure Fe3O4@NC, electromagnetic wave goes through a unique process of "absorption, reflection, and reabsorption" when it passes through the surface of the composite textile. In X-band (≈8.2-12.4 GHz), the average electromagnetic interference shielding effectiveness (EMI SE) reaches 50.1 dB, while the reflectance shielding efficiency (SER) is only 2.6 dB, and the average reflectance power coefficient (R) is as low as 0.45. The composite fabric has excellent properties and provides an effective strategy for electromagnetic interference shielding based on absorption.

Integrating Sulfur Doping with a Multi-Heterointerface Fe7S8/NiS@C Composite for Wideband Microwave Absorption.

Heterointerface engineering is presently considered a valuable strategy for enhancing the microwave absorption (MA) properties of materials via compositional modification and structural design. In this study, a sulfur-doped multi-interfacial composite (Fe7S8/NiS@C) coated with NiFe-layered double hydroxides (LDHs) is successfully prepared using a hydrothermal method and post-high-temperature vulcanization. When assembled into twisted surfaces, the NiFe-LDH nanosheets exhibit porous morphologies, improving impedance matching, and microwave scattering. Sulfur doping in composites generates heterointerfaces, numerous sulfur vacancies, and lattice defects, which facilitate the polarization process to enhance MA. Owing to the controllable heterointerface design, the unique porous structure induced multiple heterointerfaces, numerous vacancies, and defects, endowing the Fe7S8/NiS@C composite with an enhanced MA capability. In particular, the minimum reflection loss (RLmin) value reached -58.1 dB at 15.8 GHz at a thickness of 2.1 mm, and a broad effective absorption bandwidth (EAB) value of 7.3 GHz is achieved at 2.5 mm. Therefore, the Fe7S8/NiS@C composite exhibits remarkable potential as a high-efficiency MA material owing to the synergistic effects of the polarization processes, multiple scatterings, porous structures, and impedance matching.

Hydrophobic Multilayered PEG@PAN/MXene/PVDF@SiO2 Composite Film with Excellent Thermal Management and Electromagnetic Interference Shielding for Electronic Devices.

With the rapid development of electronic industry, it's pressing to develop multifunctional electromagnetic interference (EMI) shielding materials to ensure the stable operation of electronic devices. Herein, multilayered flexible PEG@PAN/MXene (Ti3C2Tx)/PVDF@SiO2 (PMF) composite film has been constructed from the level of microstructure design via coaxial electrospinning, coating spraying, and uniaxial electrospinning strategies. Benefiting from the effective encapsulation for PEG and high conductivity of MXene coating, PEG@PAN/MXene composite film with MXene coating loading density of 0.70 mg cm-2 exhibits high thermal energy storage density of 120.77 J g-1 and great EMI shielding performance (EMI SE of 34.409 dB and SSE of 49.086 dB cm3 g-1) in X-band (8-12 GHz). Therefore, this advanced composite film can not only help electronic devices prevent the influence of electromagnetic pollution in the X-band but also play an important role in electronic device thermal management. Additionally, the deposition of nano PVDF@SiO2 fibers (289 ± 128 nm) endowed the PMF composite film with great hydrophobic properties (water contact angle of 126.5°) to ensure the stable working of hydrophilic MXene coating, thereby breaks the limitation of humid application environments. The finding paves a new way for the development of novel multifunctional EMI shielding composite films for electronic devices.

A Universal Biomacromolecule-Enabled Assembly Strategy for Constructing Multifunctional Aerogels with 90% Inorganic Mass Loading from Inert Nano-Building Blocks.

Inert inorganic nano-building blocks, such as carbon nanotubes (CNTs) and boron nitride (BN) nanosheets, possess excellent physicochemical properties. However, it remains challenging to build aerogels with these inert nanomaterials unless they are chemically modified or compounded with petrochemical polymers, which affects their intrinsic properties and is usually not environmentally friendly. Here, a universal biomacromolecule-enabled assembly strategy is proposed to construct aerogels with 90 wt% ultrahigh inorganic loading. The super-high inorganic content is beneficial for exploiting the inherent properties of inert nanomaterials in multifunctional applications. Taking chitosan-CNTs aerogel as a proof-of-concept demonstration, it delivers sensitive pressure response as a pressure sensor, an ultrahigh sunlight absorption (94.5%) raising temperature under light (from 25 to 71 °C within 1 min) for clean-up of crude oil spills, and superior electromagnetic interference shielding performance of up to 68.9 dB. This strategy paves the way for the multifunctional application of inert nanomaterials by constructing aerogels with ultrahigh inorganic loading.

Serial Nitrogen-Doped Metal/Carbon Composites Derived from Organic Salts for Superior Electromagnetic Wave Absorption and Supercapacitor Electrode.

The present study provides a facile one-pot pyrolysis strategy to prepare serial nitrogen-doped (N-doped) metal/carbon composites derived from six types of metal ethylenediaminetetraacetic acid (EDTA-M, M = Co, Cu, Mn, Fe, Mg, and Ca). N-doped Co/C composite integrated carbonaceous with magnetic components to attain dielectric-magnetic double loss mechanisms. The minimum reflection loss and effective absorption bandwidth reached -57.6 dB at 1.75 mm and 4.64 GHz at 1.52 mm, respectively. The electromagnetic simulation further confirms that the dissipation ability increases with the improvement of carbonization temperature. Results show that altering the metal species of precursors can significantly improve the electrochemical performance of the composites using the identical strategy. N-doped Cu/C composite performed a maximum specific capacitance of 2383.3 F g-1 at 0.5 A g-1 -1, and maintained 86.3% cycling stability at 20 A g-1 after 5000 cycles. The energy density of a symmetrical two-electrode configuration achieved 350.13 Wh kg-1 at a power density of 4000.04 W kg-1. Density functional theory calculations indicate that nitrogen dopants cause faster ion transport and stronger adsorption capacity. Moreover, the bifunctionality of other composites types are also systematically characterized.

Modulating Electrochemical Energy Storage and Multi-Spectra Defense of MXenes by Interfacial Dual-Filler Engineering.

MXenes have attracted growing interest in electrochemical energy storage owing to their high electronic conductivity and editable surface chemistry. Besides, rendering MXenes with spectrum defense properties further broadens their versatile applications. However, the development of MXenes suffers from weak van der Waal interaction-driven self-restacking that leads to random alignment and inferior interface microenvironments. Herein, a nacre-inspired MXene film is tailored by dual-filling of 2-ureido-4[1H]-pyrimidinone (UPy)-modified polyvinyl alcohol (PVA-UPy) and carbon nanotubes (CNTs). The dual-nanofillers engineering endows the nanocomposite film with a highly ordered structure (a Herman's order value of 0.838), a high mechanical strength (139.5 MPa), and continuous conductive pathways of both the ab plane and c-axis. As a proof-of-concept, the tailored nanocomposite film achieves a considerable capacitance of 508.2 F cm-3 and long-term cycling stability without performance degradation for 10 000 cycles. It is efficient for spectra defense in radar and infrared bands, displaying a high electromagnetic shielding capacity (19186 dB cm2 g-1) and a super-low infrared (IR) emissivity (0.16), with negligible performance decay after saving in the air for 1 year, responsible for the applications in specific and complex conditions. This interfacial dual-filler engineering concept showcases effective nanotechnology toward sustainable energy applications with a long lifetime and safety.

A Current Development of Energy Harvesting Systems for Energy-Independent Bioimplantable Biosensors.

Biosensors have emerged as vital tools for the detection and monitoring of essential biological information. However, their efficiency is often constrained by limitations in the power supply. To address this challenge, energy harvesting systems have gained prominence. These off-grid, independent systems harness energy from the surrounding environment, providing a sustainable solution for powering biosensors autonomously. This continuous power source overcomes critical constraints, ensuring uninterrupted operation and seamless data collection. In this article, a comprehensive review of recent literature on energy harvesting-based biosensors is presented. Various techniques and technologies are critically examined, including optical, mechanical, thermal, and wireless power transfer, focusing on their applications and optimization. Furthermore, the immense potential of these energy harvesting-driven biosensors is highlighted across diverse fields, such as medicine, environmental surveillance, and biosignal analysis. By exploring the integration of energy harvesting systems, this review underscores their pivotal role in advancing biosensor technology. These innovations promise improved efficiency, reduced environmental impact, and broader applicability, marking significant progress in the field of biosensors.

Co/C Nanocomposites with Tunable Condensed States Induced by Conformation-Mediated Strategy for Electromagnetic Wave Absorption.

The strategic regulation of condensed state structures in multicomponent nanomaterials has emerged as an effective approach for achieving controllable electromagnetic (EM) properties. Herein, a novel conformation-mediated strategy is proposed to manipulate the condensed states of Co and C, as well as their interaction. The conformation of polyvinylpyrrolidone molecules is adjusted using a gradient methanol/water ratio, whereby the coordination dynamic equilibrium effectively governs the deposition of metal-organic framework precursors. This process ultimately influences the combined impact of derived Co and C in the resulting Co/C nanocomposites post-pyrolysis. The experimental results show that the condensed state structure of Co/C nanocomposites transitions from agglomerate state → to biphasic compact state → to loose packing state. Benefiting from the tunable collaboration between interfacial polarization and defects polarization, and the appropriate electrical conductivity, the diphasic compact state of Co/C nanocomposites achieves an effective absorbing bandwidth of 7.12 GHz (2.1 mm) and minimum reflection loss of -32.8 dB. This study highlights the significance of condensed state manipulation in comprehensively regulating the EM wave absorption characteristics of carbon-based magnetic metal nanocomposites, encompassing factors such as conductivity loss, magnetic loss, defect polarization, and interface polarization.