Three-Dimensional Ultrastructure of the Normal Rod Photoreceptor Synapse and Degenerative Changes Induced by Retinal Detachment.

The rod photoreceptor synapse is the first synapse of dim-light vision and one of the most complex in the mammalian CNS. The components of its unique structure, a presynaptic ribbon and a single synaptic invagination enclosing several postsynaptic processes, have been identified, but disagreements about their organization remain. Here, we have used EM tomography to generate high-resolution images of 3-D volumes of the rod synapse from the female domestic cat. We have resolved the synaptic ribbon as a single structure, with a single arciform density, indicating the presence of one long site of transmitter release. The organization of the postsynaptic processes, which has been difficult to resolve with past methods, appears as a tetrad arrangement of two horizontal cell and two rod bipolar cell processes. Retinal detachment severely disrupts this organization. After 7 d, EM tomography reveals withdrawal of rod bipolar dendrites from most spherules; fragmentation of synaptic ribbons, which lose their tight association with the presynaptic membrane; and loss of the highly branched telodendria of the horizontal cell axon terminals. After detachment, the hilus, the opening through which postsynaptic processes enter the invagination, enlarges, exposing the normally sequestered environment within the invagination to the extracellular space of the outer plexiform layer. Our use of EM tomography provides the most accurate description to date of the complex rod synapse and details changes it undergoes during outer segment degeneration. These changes would be expected to disrupt the flow of information in the rod pathway.SIGNIFICANCE STATEMENT Ribbon-type synapses transmit the first electrical signals of vision and hearing. Despite their crucial role in sensory physiology, the three-dimensional ultrastructure of these synapses, especially the complex organization of the rod photoreceptor synapse, is not well understood. We used EM tomography to obtain 3-D imaging at nanoscale resolution to help resolve the organization of rod synapses in normal and detached retinas. This approach has enabled us to show that in the normal retina a single ribbon and arciform density oppose a tetrad of postsynaptic processes. In addition, it enabled us to provide a 3-D perspective of the ultrastructural changes that occur in response to retinal detachment.

Three-dimensional ultrastructural analysis and histomorphometry of collagen bundles in the periodontal ligament using focused ion beam/scanning electron microscope tomography.

BACKGROUND AND OBJECTIVE: The periodontal ligament (PDL) is an essential tissue for tooth function. However, the 3-dimensional ultrastructure of these PDL collagen bundles on a mesoscale is not clear. We investigated the 3-dimensional ultrastructure of these collagen bundles and quantitatively analyzed their histomorphometry using focused ion beam/scanning electron microscope (FIB/SEM) tomography. MATERIAL AND METHODS: The PDLs of the first mandibular molar of male C57BL/6 mice were analyzed using FIB/SEM tomography. The serial images of the collagen bundles so obtained were reconstructed. The collagen bundles were analyzed quantitatively using 3-dimensional histomorphometry. RESULTS: Collagen bundles of the PDL demonstrated multiple branched structures, rather than a single rope-like structure, and were wrapped in cytoplasm sheets. The structure of the horizontal fiber of the collagen bundle was an extensive meshwork. In contrast, the oblique and apical fibers of the collagen bundle showed a chain-like structure. The area and the minor and major axis lengths of cross-sections of the horizontal fiber, as determined from 3-dimensional images, were significantly different from those of the oblique and apical fibers. CONCLUSION: These findings indicate that collagen bundles in horizontal fiber areas have high strength and that the tooth is firmly anchored to the alveolar bone by the horizontal fibers, but is not secured evenly to the alveolar bone. The tooth is firmly anchored around the cervical area, creating a "slingshot-like structure." This study has provided further insights into the structure of the PDL and forms the basis for the development of more effective therapies for periodontal tissue regeneration.

Giant cadherins Fat and Dachsous self-bend to organize properly spaced intercellular junctions.

The cadherins Fat and Dachsous regulate cell polarity and proliferation via their heterophilic interactions at intercellular junctions. Their ectodomains are unusually large because of repetitive extracellular cadherin (EC) domains, which raises the question of how they fit in regular intercellular spaces. Cadherins typically exhibit a linear topology through the binding of Ca(2+) to the linker between the EC domains. Our electron-microscopic observations of mammalian Fat4 and Dachsous1 ectodomains, however, revealed that, although their N-terminal regions exhibit a linear configuration, the C-terminal regions are kinked with multiple hairpin-like bends. Notably, certain EC-EC linkers in Fat4 and Dachsous1 lost Ca(2+)-binding amino acids. When such non-Ca(2+)-binding linkers were substituted for a normal linker in E-cadherin, the mutant E-cadherins deformed more extensively than the wild-type molecule. To simulate cadherin structures with non-Ca(2+)-binding linkers, we used an elastic network model and confirmed that bent configurations can be generated by deformation of non-Ca(2+)-binding linkers. These findings suggest that Fat and Dachsous self-bend due to the loss of Ca(2+)-binding amino acids from specific EC-EC linkers, and can therefore adapt to confined spaces.

Nonuniform and variable arrangements of ryanodine receptors within mammalian ventricular couplons.

RATIONALE: Single-tilt tomograms of the dyads in rat ventricular myocytes indicated that type 2 ryanodine receptors (RYR2s) were not positioned in a well-ordered array. Furthermore, the orientation and packing strategy of purified type 1 ryanodine receptors in lipid bilayers is determined by the free Mg2+ concentration. These observations led us to test the hypothesis that RYR2s within the mammalian dyad have multiple and complex arrangements. OBJECTIVES: To determine the arrangement of RYR2 tetramers in the dyads of mammalian cardiomyocytes and the effects of physiologically and pathologically relevant factors on this arrangement. METHODS AND RESULTS: We used dual-tilt electron tomography to produce en-face views of dyads, enabling a direct examination of RYR2 distribution and arrangement. Rat hearts fixed in situ; isolated rat cardiomyocytes permeabilized, incubated with 1 mmol/L Mg2+, and then fixed; and sections of human ventricle, all showed that the tetramer packing within a dyad was nonuniform containing a mix of checkerboard and side-by-side arrangements, as well as isolated tetramers. Both phosphorylation and 0.1 mmol/L Mg2+ moved the tetramers into a predominantly checkerboard configuration, whereas the 4 mmol/L Mg2+ induced a dense side-by-side arrangement. These changes occurred within 10 minutes of application of the stimuli. CONCLUSIONS: The arrangement of RYR2 tetramers within the mammalian dyad is neither uniform nor static. We hypothesize that this is characteristic of the dyad in vivo and may provide a mechanism for modulating the open probabilities of the individual tetramers.

A Cristae-Like Microcompartment in Desulfobacterota.

Some Alphaproteobacteria contain intracytoplasmic membranes (ICMs) and proteins homologous to those responsible for the mitochondrial cristae, an observation which has given rise to the hypothesis that the Alphaproteobacteria endosymbiont had already evolved cristae-like structures and functions. However, our knowledge of microbial fine structure is still limited, leaving open the possibility of structurally homologous ICMs outside the Alphaproteobacteria. Here, we report on the detailed characterization of lamellar cristae-like ICMs in environmental sulfate-reducing Desulfobacterota that form syntrophic partnerships with anaerobic methane-oxidizing (ANME) archaea. These structures are junction-bound to the cytoplasmic membrane and resemble the form seen in the lamellar cristae of opisthokont mitochondria. Extending these observations, we also characterized similar structures in Desulfovibrio carbinolicus, a close relative of the magnetotactic D. magneticus, which does not contain magnetosomes. Despite a remarkable structural similarity, the key proteins involved in cristae formation have not yet been identified in Desulfobacterota, suggesting that an analogous, but not a homologous, protein organization system developed during the evolution of some members of Desulfobacterota. IMPORTANCE Working with anaerobic consortia of methane oxidizing ANME archaea and their sulfate-reducing bacterial partners recovered from deep sea sediments and with the related sulfate-reducing bacterial isolate D. carbinolicus, we discovered that their intracytoplasmic membranes (ICMs) appear remarkably similar to lamellar cristae. Three-dimensional electron microscopy allowed for the novel analysis of the nanoscale attachment of ICMs to the cytoplasmic membrane, and these ICMs are structurally nearly identical to the crista junction architecture seen in metazoan mitochondria. However, the core junction-forming proteins must be different. The outer membrane vesicles were observed to bud from syntrophic Desulfobacterota, and darkly stained granules were prominent in both Desulfobacterota and D. carbinolicus. These findings expand the taxonomic breadth of ICM-producing microorganisms and add to our understanding of three-dimensional microbial fine structure in environmental microorganisms.

Comparison of periodontitis-associated oral biofilm formation under dynamic and static conditions.

PURPOSE: The purpose of this study was to compare the characteristics of single- and dual-species in vitro oral biofilms made by static and dynamic methods. METHODS: Hydroxyapatite (HA) disks, 12.7 mm in diameter and 3 mm thick, were coated with processed saliva for 4 hours. The disks were divided into a static method group and a dynamic method group. The disks treated with a static method were cultured in 12-well plates, and the disks in the dynamic method group were cultured in a Center for Disease Control and Prevention (CDC) biofilm reactor for 72 hours. In the single- and dual-species biofilms, Fusobacterium nucleatum and Porphyromonas gingivalis were used, and the amount of adhering bacteria, proportions of species, and bacterial reduction of chlorhexidine were examined. Bacterial adhesion was examined with scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). RESULTS: Compared with the biofilms made using the static method, the biofilms made using the dynamic method had significantly lower amounts of adhering and looser bacterial accumulation in SEM and CLSM images. The proportion of P. gingivalis was higher in the dynamic method group than in the static method group; however, the difference was not statistically significant. Furthermore, the biofilm thickness and bacterial reduction by chlorhexidine showed no significant differences between the 2 methods. CONCLUSIONS: When used to reproduce periodontal biofilms composed of F. nucleatum and P. gingivalis, the dynamic method (CDC biofilm reactor) formed looser biofilms containing fewer bacteria than the well plate. However, this difference did not influence the thickness of the biofilms or the activity of chlorhexidine. Therefore, both methods are useful for mimicking periodontitis-associated oral biofilms.

STEM tomography reveals that the canalicular system and α-granules remain separate compartments during early secretion stages in blood platelets.

UNLABELLED: ESSENTIALS: How platelets organize their α-granule cargo and use their canalicular system remains controversial. Past structural studies were limited due to small sampling volumes or decreased resolution. Our analyses revealed homogeneous granules and a closed canalicular system that opened on activation. Understanding how platelets alter their membranes during activation and secretion elucidates hemostasis. BACKGROUND: Platelets survey the vasculature for damage and, in response, activate and release a wide range of proteins from their α-granules. Alpha-granules may be biochemically and structurally heterogeneous; however, other studies suggest that they may be more homogeneous with the observed variation reflecting granule dynamics rather than fundamental differences. OBJECTIVES: Our aim was to address how the structural organization of α-granules supports their dynamics. METHODS: To preserve the native state, we prepared platelets by high-pressure freezing and freeze-substitution; and to image nearly entire cells, we recorded tomographic data in the scanning transmission electron microscope (STEM). RESULTS AND CONCLUSIONS: In resting platelets, we observed a morphologically homogeneous α-granule population that displayed little variation in overall matrix electron density in freeze-substituted preparations (i.e., macro-homogeneity). In resting platelets, the incidence of tubular granule extensions was low, ~4%, but this increased by > 10-fold during early steps in platelet secretion. Using STEM, we observed that the initially decondensing α-granules and the canalicular system remained as separate membrane domains. Decondensing α-granules were found to fuse heterotypically with the plasma membrane via long, tubular connections or homotypically with each other. The frequency of canalicular system fusion with the plasma membrane also increased by about three-fold. Our results validate the utility of freeze-substitution and STEM tomography for characterizing platelet granule secretion and suggest a model in which fusion of platelet α-granules with the plasma membrane occurs via long tubular connections that may provide a spatially limited access route for the timed release of α-granule proteins.

A comparative evaluation of the sealing ability of two calcium silicate based sealers and a resin epoxy-based sealer through scanning electron microscopy and bond strength: an in vitro study

Aim: this study aimed to compare the sealing ability of two types of commercially available calcium silicate bioceramic based root canal sealers and a resin based root canal sealer. Methods: Twenty one single-rooted teeth were used, samples (n= 21) were randomly divided into three groups according to the sealer used (group A; ADSEAL, group B; Wellroot, group C; Ceraseal). Roots were then cleaved longitudinally in the labiolingual direction; all samples were then sectioned at three, six, and nine mm from the root tip. The penetration of sealers into the dentinal tubules was examined at 1000x with a scanning electron microscope. Data were tested for normality using Shapiro Wilk test. ANOVA test was used for analyzing normally distributed data followed by Bonferroni post hoc test for pair-wise comparison. Significance level p≤0.001. Results: groups B and C showed better sealing ability than group A in all the three sections. The coronal section showed higher sealing ability than the middle section followed by the apical section in the three tested groups. Conclusion: it can be concluded that both calcium silicate-based sealers had better sealing ability and higher bond strength than the resin epoxy- based sealer

Structural and Chemical Analysis of the Zirconia-Veneering Ceramic Interface.

The interfacial interaction of veneering ceramic with zirconia is still not fully understood. This study aimed to characterize morphologically and chemically the zirconia-veneering ceramic interface. Three zirconia-veneering conditions were investigated: 1) zirconia-veneering ceramic fired on sandblasted zirconia, 2) zirconia-veneering ceramic on as-sintered zirconia, and 3) alumina-veneering ceramic (lower coefficient of thermal expansion [CTE]) on as-sintered zirconia. Polished cross-sectioned ceramic-veneered zirconia specimens were examined using field emission gun scanning electron microscopy (Feg-SEM). In addition, argon-ion thinned zirconia-veneering ceramic interface cross sections were examined using scanning transmission electron microscopy (STEM)-energy dispersive X-ray spectrometry (EDS) at high resolution. Finally, the zirconia-veneering ceramic interface was quantitatively analyzed for tetragonal-to-monoclinic phase transformation and residual stress using micro-Raman spectroscopy (µRaman). Feg-SEM revealed tight interfaces for all 3 veneering conditions. High-resolution transmission electron microscopy (HRTEM) disclosed an approximately 1.0-µm transformed zone at sandblasted zirconia, in which distinct zirconia grains were no longer observable. Straight grain boundaries and angular grain corners were detected up to the interface of zirconia- and alumina-veneering ceramic with as-sintered zirconia. EDS mapping disclosed within the zirconia-veneering ceramic a few nanometers thick calcium/aluminum-rich layer, touching the as-sintered zirconia base, with an equally thick silicon-rich/aluminum-poor layer on top. µRaman revealed t-ZrO2-to-m-ZrO2 phase transformation and residual compressive stress at the sandblasted zirconia surface. The difference in CTE between zirconia- and the alumina-veneering ceramic resulted in residual tensile stress within the zirconia immediately adjacent to its interface with the veneering ceramic. The rather minor chemical elemental shifts recorded in the veneering ceramic did not suffice to draw definitive conclusions regarding potential chemical interaction of the veneering ceramic with zirconia. Sandblasting damaged the zirconia surface and induced phase transformation that also resulted in residual compressive stress. Difference in CTE of zirconia versus that of the veneering ceramic resulted in an unfavorable residual tensile stress at the zirconia-veneering ceramic interface.

Effect of surface treatments on repair strength, roughness and morphology in aged metal-free crowns

Aim: The roughness and micromorphology of various surface treatments in aged metal-free crowns and the bond strength of these crowns repaired with composite resin (CR) was evaluated in vitro. Methods: A CR core build-up was confectioned in 60 premolars and prepared for metal-free crowns. Prepared teeth were molded with the addition of silicone, and the laboratory ceromer/fiber-reinforced crowns (SR Adoro/Fibrex Lab) were fabricated. Subsequently, the crowns were cemented and artificially aged in a mechanical fatigue device (1.2 X 106 cycles), then divided into 4 groups (n = 15) according to the surface treatment: 1) phosphoric acid etching (PA); 2) PA + silane application; 3) roughening with a diamond bur + PA; and 4) sandblasting with Al2O3 + PA. After the treatments, the crowns (n = 2) were qualitatively analyzed by scanning electron microscope (SEM) and surface roughness (n = 5) was analyzed before and after the surface treatment (Ra parameter). The remaining crowns (n = 8) received standard repair with an adhesive system (Tetric N-Bond) and a nanohybrid CR (Tetric N-Ceram), and the microshear bond strength (SBS) test was performed (0.5 mm/min). Roughness and SBS data were analyzed by one- and two-way ANOVA, respectively, as well as Tukey's post-test (α = 0.05). Results: Sandblasting with Al2O3 + PA resulted in the highest final roughness and SBS values. The lowest results were observed in the PA group, whereas the silane and diamond bur groups showed intermediate values. Conclusion: It may be concluded that indirect ceromer crowns sandblasted with aluminum oxide prior to PA etching promote increased roughness surface and bond strength values

Novel characteristics of normal supraspinatus insertion in rats: an ultrastructural analysis using three-dimensional reconstruction using focused ion beam/scanning electron microscope tomography.

BACKGROUND: the histological architecture of the insertion after a rotator cuff repair is completely different from that of normal tendon-bone insertions. Analysis of normal insertions by electron microscopy may enhance the understanding of the pathophysiology of tendon-to-bone healing after rotator cuff repair. The present study examined the normal supraspinatus insertion in rats using a new three-dimensional (3D) electron microscopic method, focused ion beam/scanning electron microscope (FIB/SEM) tomography. METHODS: normal supraspinatus insertion of adult Sprague-Dawley rats was analyzed. FIB/SEM tomography was performed on the entire insertion. The obtained serial images were reconstructed, and the 3D cellular morphology and organization of collagen bundles was observed. RESULTS: the cellular shapes between the tendon-cartilage interface were successfully reconstructed. The cells in the cartilage region were spherical without any cellular processes, while the cells in the intermediate region had some cellular processes oriented longitudinally along the collagen bundles. In addition, these 2 regions were smoothly transferred under ultrastructural resolution. CONCLUSIONS: structures at the normal insertion gradually changed from the fibrous cartilage to the tendon midsubstance, which may contribute to the biomechanical strength of the site. These novel cell characteristics may provide necessary knowledge for better regeneration of tendon-to-bone insertions after rotator cuff repair.

The effect of hydrofluoric acid and resin cement formulation on the bond strength to lithium disilicate ceramic

Abstract To investigate how the hydrofluoric acid (HF) concentrations applied to a lithium disilicate glass-ceramic (EMX) affects the surface morphology and microtensile bond strength (μTBS) of ceramics to dentin, using light-cured resin cements with or without UDMA. Sixty-three EMX square ceramic blocks were etched for 20 seconds using different HF concentrations (1%, 5% and 10%) and luted to dentin using two types of resin cement combinations: BisGMA/TEGDMA and BisGMA/TEGDMA/UDMA (n = 10). Each bonded EMX-dentin block was sectioned to obtain 1 mm2 sticks for μTBS evaluation. Half of the sticks were tested after 24 hours and the other half was assessed after 6 months of water storage. Data were statistically assessed using split-plot three-way ANOVA and multiple comparisons were performed using the Tukey's post hoc test (α = 0.05). One EMX sample from each HF concentration was analyzed using field-emission scanning electron microscope (FE-SEM) to characterize the etching pattern. According to the FE-SEM images, increasing the concentration of HF from 1 to 5 and then to 10% led to increased removal of glassy matrix and greater exposure of lithium disilicate crystals. The 10% HF concentration yielded higher μTBS when compared to 1% for BisGMA/TEGDMA formulation (p < 0.05); whereas HF 1% and 5% showed similar μTBS values when compared to 10% HF for BisGMA/TEGDMA/UDMA resin matrix (p > 0.05) at both storage times. Water aging decreased the μTBS values (p < 0.05), except when 10% HF was associated with BisGMA/TEGDMA resin cement. Resin cement formulation and hydrofluoric acid concentrations can interfere with the immediate and long-term glass-ceramic bond strength to dentin.