RESUMEN
Tin halide perovskite solar cells (PSCs) are regarded as the most promising lead-free alternatives for photovoltaic applications. However, they still suffer from uncompetitive photovoltaic performance because of the facile Sn2+ oxidation and Sn-related defects. Herein, a defect and carrier management strategy by using diaminopyridine (DP) and 4-bromo-2,6-diaminopyridine (4BrDP) as multifunctional additives for tin halide perovskites is reported. Both DP and 4BrDP induced strong interaction with tin perovskites by coordinate bonding and NâH···I hydrogen bonding, which greatly suppresses the micro-strain and Urbach energy of tin halide perovskite films. The strong hydrogen bonding inhibits the formation of I3 - and related defect density. Meanwhile, the electron-donor species of halogen bond in 4BrDP provides higher reactivity of 2 and 6 sites, which indicates stronger passivation ability with tin halide perovskites. These advances enable a champion power conversion efficiency (PCE) of 13.40% in 4BrDP-processed devices with remarkable improvement in both open-circuit voltage (Voc) of 881 mV and fill factor (FF) of 71.26%. The 4BrDP devices retain 91% and 82% of the pristine PCE after 2000 h storage in N2 atmosphere and 1000 h under 85 °C, respectively. Therefore, this work provides new insight into molecular design for high-performance and stable lead-free optoelectronics.
RESUMEN
Increasing the relative dielectric constant is a constant pursuit of organic semiconductors, but it often leads to multiple changes in device characteristics, hindering the establishment of a reliable relationship between dielectric constant and photovoltaic performance. Herein, a new non-fullerene acceptor named BTP-OE is reported by replacing the branched alkyl chains on Y6-BO with branched oligoethylene oxide chains. This replacement successfully increases the relative dielectric constant from 3.28 to 4.62. To surprise, BTP-OE offers consistently lower device performance relative to Y6-BO in organic solar cells (16.27% vs 17.44%) due to the losses in open-circuit voltage and fill factor. Further investigations unravel that BTP-OE has resulted in reduced electron mobility, increased trap density, enhanced first order recombination, and enlarged energetic disorder. These results demonstrate the complex relationship between dielectric constant and device performance, which provide valuable implications for the development of organic semiconductors with high dielectric constant for photovoltaic application.
RESUMEN
The interface between electron-donating (D) and electron-accepting (A) materials in organic photovoltaic (OPV) devices is commonly probed by charge-transfer (CT) electroluminescence (EL) measurements to estimate the CT energy, which critically relates to device open-circuit voltage. It is generally assumed that during CT-EL injected charges recombine at close-to-equilibrium energies in their respective density of states (DOS). Here, we explicitly quantify that CT-EL instead originates from higher-energy DOS site distributions significantly above DOS equilibrium energies. To demonstrate this, we have developed a quantitative and experimentally calibrated model for CT-EL at organic D/A heterointerfaces, which simultaneously accounts for the charge transport physics in an energetically disordered DOS and the Franck-Condon broadening. The 0-0 CT-EL transition lineshape is numerically calculated using measured energetic disorder values as input to 3-dimensional kinetic Monte Carlo simulations. We account for vibrational CT-EL overtones by selectively measuring the dominant vibrational phonon-mode energy governing CT luminescence at the D/A interface using fluorescence line-narrowing spectroscopy. Our model numerically reproduces the measured CT-EL spectra and their bias dependence and reveals the higher-lying manifold of DOS sites responsible for CT-EL. Lowest-energy CT states are situated â¼180 to 570 meV below the 0-0 CT-EL transition, enabling photogenerated carrier thermalization to these low-lying DOS sites when the OPV device is operated as a solar cell rather than as a light-emitting diode. Nonequilibrium site distribution rationalizes the experimentally observed weak current-density dependence of CT-EL and poses fundamental questions on reciprocity relations relating light emission to photovoltaic action and regarding minimal attainable photovoltaic energy conversion losses in OPV devices.
RESUMEN
Previous reports have observed a direct relationship between the polymer poly(3-hexylthiophene) molecular weight (MW) and the perovskite solar cell (PSC) efficiency. Herein, we analyse how the differences in MW and the differences in energetic disorder influence the interfacial carrier losses in the PSCs under operation conditions and explain the observed differences. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.
RESUMEN
For optimizing steady-state performance in organic electrochemical transistors (OECTs), both molecular design and structural alignment approaches must work in tandem to minimize energetic and microstructural disorders in polymeric mixed ionic-electronic conductor films. Herein, a series of poly(diketopyrrolopyrrole)s bearing various lengths of aliphatic-glycol hybrid side chains (PDPP-mEG; m = 2-5) is developed to achieve high-performance p-type OECTs. PDPP-4EG polymer with the optimized length of side chains exhibits excellent crystallinity owing to enhanced lamellar and backbone interactions. Furthermore, the improved structural ordering in PDPP-4EG films significantly decreases trap state density and energetic disorder. Consequently, PDPP-4EG-based OECT devices produce a mobility-volumetric capacitance product ([µC*]) of 702 F V-1 cm-1 s-1 and a hole mobility of 6.49 ± 0.60 cm2 V-1 s-1 . Finally, for achieving the optimal structural ordering along the OECT channel direction, a floating film transfer method is employed to reinforce the unidirectional orientation of polymer chains, leading to a substantially increased figure-of-merit [µC*] to over 800 F V-1 cm-1 s-1 . The research demonstrates the importance of side chain engineering of polymeric mixed ionic-electronic conductors in conjunction with their anisotropic microstructural optimization to maximize OECT characteristics.
RESUMEN
Chemical doping can be used to tune the optoelectronic properties of conjugated polymers (CPs), extending their applications as conducting materials. Unfortunately, chemically doped CP films containing excess dopants exhibit an increase in energetic disorder upon structural alteration, and Coulomb interactions between charge carriers and dopants also affect such disorder. The increase in energetic disorder leads to a broadening of the density of states, which consequently impedes efficient charge transport in chemically doped CPs. However, the molecular origins that are inherently resistant to such incidental increase of energetic disorder in chemically doped CPs have not been sufficiently explored. Here, it is discovered that energetic disorder in chemically doped CPs can be suppressed to a level close to the theoretical limit. Indacenodithiophene-co-benzothiadiazole (IDTBT) doped with triethyloxonium hexachloroantimonate (OA) exhibits disorder-free charge-transport characteristics and band-like transport behavior with astonishing carrier mobility as a result of reinforced 1D intramolecular transport. Molecular structure of IDTBT provides a capability to lower the energetic disorder that generally arises from the inclusion of heterogeneous dopants. The results suggest the possibilities of implementing disorder-free CPs that exhibit excellent charge transport characteristics in the chemically doped state and satisfy a prerequisite for their availability in the industry.
RESUMEN
Conjugated polymers need to be doped to increase charge carrier density and reach the electrical conductivity necessary for electronic and energy applications. While doping increases carrier density, Coulomb interactions between the dopant molecules and the localized carriers are poorly screened, causing broadening and a heavy tail in the electronic density-of-states (DOS). The authors examine the effects of dopant-induced disorder on two complimentary charge transport properties of semiconducting polymers, the Seebeck coefficient and electrical conductivity, and demonstrate a way to mitigate them. Their simulations, based on a modified Gaussian disorder model with Miller-Abrahams hopping rates, show that dopant-induced broadening of the DOS negatively impacts the Seebeck coefficient versus electrical conductivity trade-off curve. Increasing the dielectric permittivity of the polymer mitigates dopant-carrier Coulomb interactions and improves charge transport, evidenced by simultaneous increases in conductivity and the Seebeck coefficient. They verified this increase experimentally in iodine-doped P3HT and P3HT blended with barium titanate (BaTiO3 ) nanoparticles. The addition of 2% w/w BaTiO3 nanoparticles increased conductivity and Seebeck across a broad range of doping, resulting in a fourfold increase in power factor. Thus, these results show a promising path forward to reduce the dopant-charge carrier Coulomb interactions and mitigate their adverse impact on charge transport.
RESUMEN
Indoor organic photovoltaics (IOPVs) cells have attracted considerable attention in the past few years. Herein, two PTV-derivatives, PTVT-V and PTVT-T, were used as donor materials to fabricate IOPV cells with ITCC as the acceptor. The preferred orientation of the crystals changed from edge-on to face-on after replacing the ethylene in the backbones of PTVT-V by the thiophene in that of PTVT-T. Besides, it was found that, the energetic disorder of the PTVT-T:ITCC based system is 58 meV, which is much lower than that of PTVT-V:ITCC-based system (70 meV). The lower energetic disorder in PTVT-T:ITCC leads to an efficient charge transfer, charge transport, and thus the weak charge recombination. As a result, a PCE of 9.60% under AM 1.5 G and a PCE of 24.27% under 1,000 lux (LED 2,700 K) with a low non-radiative energy loss of 0.210 eV were obtained based on PTVT-T:ITCC blend. The results indicate that to improve the PTV-derivatives photovoltaic properties by suppressing the energetic disorder is a promising way to realize low-cost IOPV cells.
RESUMEN
Mixing different compounds to improve functionality is one of the pillars of the organic electronics field. Here, the degree to which the charge transport properties of the constituent materials are simply additive when materials are mixed is quantified. It is demonstrated that in bulk heterojunction organic solar cells, hole mobility in the donor phase depends critically on the choice of the acceptor material, which may alter the energetic disorder of the donor. The same holds for electron mobility and disorder in the acceptor. The associated mobility differences can exceed an order of magnitude compared to pristine materials. Quantifying these effects by a state-filling model for the open-circuit voltage (VOC) of ternary Donor:Acceptor1:Acceptor2 (D:A1:A2) organic solar cells leads to a physically transparent description of the surprising, nearly linear tunability of the VOC with the A1:A2 weight ratio. It is predicted that in binary OPV systems, suitably chosen donor and acceptor materials can improve the device power conversion efficiency (PCE) by several percentage points, for example from 11 to 13.5% for a hypothetical state-of-the-art organic solar cell, highlighting the importance of this design rule.
RESUMEN
We probe the energetic landscape at a model pentacene/fullerene (C60) interface to investigate the interactions between positive and negative charges, which are critical to the processes of charge separation and recombination in organic solar cells. Using a polarizable force field, we find that polarization energy, i.e., the stabilization a charge feels due to its environment, is larger at the interface than in the bulk for both a positive and a negative charge. The combination of the charge being more stabilized at the interface and the Coulomb attraction between the charges results in a barrier to charge separation at the pentacene/C60 interface that can be in excess of 0.7 eV for static configurations of the donor and acceptor locations. However, the impact of molecular motions, i.e., the dynamics, at the interface at room temperature results in a distribution of polarization energies and in charge separation barriers that can be significantly reduced. The dynamic nature of the interface is thus critical, with the polarization energy distributions indicating that sites along the interface shift in time between favorable and unfavorable configurations for charge separation.
RESUMEN
Energetic disorder, an important parameter affecting the performance of organic photovoltaics, is significantly decreased upon the addition of processing additives in a highly efficient benzodithiophene-based copolymer blend (PBDTTT-C-T:PC71 BM). Wide-angle and small-angle X-ray scattering measurements suggest that the origin of this reduced energetic disorder is due to increased aggregation and a larger average fullerene domain size together with purer phases.
Asunto(s)
Butiratos/química , Ácido Butírico/química , Suministros de Energía Eléctrica , Polímeros/química , Energía Solar , Tiofenos/química , Transporte de ElectrónRESUMEN
The effect of polymer side chains on device performance was investigated for PBDT(EtHex)-TPD(Oct):PC70BM and PBDT(EtHex)-TPD(EtHex):PC70BM BHJ solar cells. Going from a linear side chain on the polymer's acceptor moiety to a branched side chain was determined to have a negative impact on the overall device efficiency, because of significantly reduced short-circuit current (J(sc)) and fill factor (FF) values. Sub-bandgap external quantum efficiency (EQE) and transient photoluminescence (PL) measurements showed more-efficient carrier generation for the polymer with linear side chains, because of a higher degree of charge-transfer (CT) state delocalization, leading to more-efficient exciton dissociation. Furthermore, the increase in π-π stacking distance and disorder for the bulkier ethylhexyl side chain were shown to result in a lower hole mobility, a higher bimolecular recombination, and a higher energetic disorder. The use of linear side chains on the polymer's acceptor moiety was shown to promote photogeneration, because of more-effective CT states and favorable carrier transport resulting in improved solar cell performance.