Organic molecular dynamics and charge-carrier lifetime in lead iodide perovskite MAPbI3.

The long charge carrier lifetime of the hybrid organic-inorganic perovskites (HOIPs) is the key for their remarkable performance as a solar cell material. The microscopic mechanism for the long lifetime is still in debate. Here, by using a muon spin relaxation technique that probes the fluctuation of local magnetic fields, we show that the muon depolarization rate (Δ) of a prototype HOIP methylammonium lead iodide (MAPbI3) shows a sharp decrease with increasing temperature in two steps above 120 K and 190 K across the structural transition from orthorhombic to tetragonal structure at 162 K. Our analysis shows that the reduction of Δ is quantitatively in agreement with the expected behavior due to the rapid development of methyl ammonium (MA) jumping rotation around the C 3 and C 4 symmetry axes. Our results provide direct evidence for the intimate relation between the rotation of the electric dipoles of MA molecules and the charge carrier lifetime in HOIPs.

Bulk Photovoltaic Effect Induced by Non-Covalent Interactions in Bilayered Hybrid Perovskite for Efficient Passive X-Ray Detection.

Hydrogen bonding as a multifunctional tool has always influenced the structure of hybrid perovskites. Compared with the research on hydrogen bonding, the study of halogen-halogen interactions on the structure and properties of hybrid perovskites is still in its early stages. Herein, a polar bilayered hybrid perovskite (IEA)2FAPb2I7 (IEA+ is 2-iodoethyl-1-ammonium, FA is formamidinium) with iodine-substituted spacer is successfully constructed by changing the configuration of interlayer cations and regulating non-covalent interactions at the organic-inorganic interface, which shows a shorter interlayer spacing and higher density (ρ = 3.862 g cm-3). The generation of structure polarity in (IEA)2FAPb2I7 is caused by the synergistic effect of hydrogen bonding and halogen-halogen interactions. Especially, as the length of the carbon chain in organic cations decreases, the I---I interaction in the system gradually strengthens, which may be the main reason for the symmetry-breaking. Polarity-induced bulk photovoltaics (Voc = 1.0 V) and higher density endow the device based on (I-EA)2FAPb2I7 exhibit a high sensitivity of 175.6 µC Gy-1 cm-2 and an ultralow detection limit of 60.4 nGy s-1 at 0 V bias under X-ray irradiation. The results present a facile approach for designing polar multifunctional hybrid perovskites, also providing useful assistance for future research on halogen-halogen interactions.

Prediction of Organic-Inorganic Hybrid Perovskite Band Gap by Multiple Machine Learning Algorithms.

As an indicator of the optical characteristics of perovskite materials, the band gap is a crucial parameter that impacts the functionality of a wide range of optoelectronic devices. Obtaining the band gap of a material via a labor-intensive, time-consuming, and inefficient high-throughput calculation based on first principles is possible. However, it does not yield the most accurate results. Machine learning techniques emerge as a viable and effective substitute for conventional approaches in band gap prediction. This paper collected 201 pieces of data through the literature and open-source databases. By separating the features related to bits A, B, and X, a dataset of 1208 pieces of data containing 30 feature descriptors was established. The dataset underwent preprocessing, and the Pearson correlation coefficient method was employed to eliminate non-essential features as a subset of features. The band gap was predicted using the GBR algorithm, the random forest algorithm, the LightGBM algorithm, and the XGBoost algorithm, in that order, to construct a prediction model for organic-inorganic hybrid perovskites. The outcomes demonstrate that the XGBoost algorithm yielded an MAE value of 0.0901, an MSE value of 0.0173, and an R2 value of 0.991310. These values suggest that, compared to the other two models, the XGBoost model exhibits the lowest prediction error, suggesting that the input features may better fit the prediction model. Finally, analysis of the XGBoost-based prediction model's prediction results using the SHAP model interpretation method reveals that the occupancy rate of the A-position ion has the greatest impact on the prediction of the band gap and has an A-negative correlation with the prediction results of the band gap. The findings provide valuable insights into the relationship between the prediction of band gaps and significant characteristics of organic-inorganic hybrid perovskites.

Organic-Inorganic Hybrid Ferroelectric and Antiferroelectric with Afterglow Emission.

Luminescent ferroelectrics are holding exciting prospect for integrated photoelectronic devices due to potential light-polarization interactions at electron scale. Integrating ferroelectricity and long-lived afterglow emission in a single material would offer new possibilities for fundamental research and applications, however, related reports have been a blank to date. For the first time, we here achieved the combination of notable ferroelectricity and afterglow emission in an organic-inorganic hybrid material. Remarkably, the presented (4-methylpiperidium)CdCl3 also shows noticeable antiferroelectric behavior. The implementation of cationic customization and halogen engineering not only enables a dramatic enhancement of Curie temperature of 114.4 K but also brings a record longest emission lifetime up to 117.11 ms under ambient conditions, realizing a leapfrog improvement of at least two orders of magnitude compared to reported hybrid ferroelectrics so far. This finding would herald the emergence of novel application potential, such as multi-level density data storage or multifunctional sensors, towards the future integrated optoelectronic devices with multitasking capabilities.

Designing a Dimension Reduced Hybrid Perovskite with Robust Large Birefringence by Expanding Cationic π-Delocation.

It is in great demand to discover new materials with large birefringence for the miniaturization of optical communication devices. In this work, a new one-dimensional hybrid halide perovskite, (C6 N10 H8 )Pb2 Br6 , is obtained successfully through structural design of dimension reduction from the notable three-dimensional halide perovskite CsPbBr3 . Remarkably, (C6 N10 H8 )Pb2 Br6 exhibits a significantly enhanced birefringence of ∆n = 0.42@550 nm, which is the largest among halide perovskites so far. Furthermore, its birefringence performance is robust in a wide temperature range of 300-440 K. Theoretical calculations reveal that this outstanding birefringence results from the synergistic effect of [PbBr6 ]4- octahedra and [C6 N10 H8 ]2+ cations with expanding π-delocation. According to further structural analyses, the structural dimension reduction cooperating with the increase of [PbBr6 ]4- octahedral distortion leads to the enhanced birefringence. This work uncovers the great promise of hybrid halide perovskites as robust birefringent crystals in future optical communication and would shed useful insights on the design and synthesis of new birefringent crystals.

Homogeneous Bridging Induces Compact and Scalable Perovskite Thick Films for X-Ray Flat-Panel Detectors.

Solution-processed organic-inorganic hybrid perovskite polycrystalline thick films have shown great potential in X-ray detection. However, the preparation of compact perovskite thick films with large area is still challenging due to the limitation of feasible ink formulation and pinholes caused by solvent volatilization. Post-treatment and hot-pressing are usually involved to improve the film quality, which is however unsuitable for subsequent integration. In this work, a homogeneous bridging strategy is developed to prepare compact perovskite films directly. A stable perovskite slurry with suitable viscosity consisting of undissolved grains and supersaturated solution is formed by adding a weak coordination solvent to the pre-synthesized microcrystalline powders. Small perovskite grains in situ grow from the saturated solution during the annealing, filling the pinholes and connecting the surrounding original grains. As a result, large-area perovskite thick film with tight grain arrangement and ultralow current drift is blade-coated to achieve X-ray imaging. The optimal device displays an impressive mobility-lifetime product of 2.2 × 10-3  cm2  V-1 and a champion ratio of sensitivity to the dark current density of 2.23 × 1011  µC Gyair -1  A-1 . This work provides a simple and effective route to prepare high-quality perovskite thick films, which is instructive for the development of perovskite-based X-ray flat-panel detectors.

Introducing Ferroelasticity into 1D Hybrid Lead Halide Semiconductor by Halogen Substitution Strategy.

Organic-inorganic hybrid lead halide perovskites (OLHPs), represented by (CH3 NH3 )PbI3 , are one of the research focus due to their exceptional performance in optoelectronic applications, and ferroelastic domain walls are benign to their charge carrier transport that is confirmed recently. Among them, the 1D OLHPs feature better stability against desorption and moisture, but related 1D ones possessing ferroelasticity are rarely investigated and reported so far. In this work, the 1D ferroelastic semiconductor (N-iodomethyl-N-methyl-morpholinium)PbI3 ((IDMML)PbI3 ) is prepared successfully by introducing successively halogenate atoms from Cl, Br to I into the organic cation of the prototype (N,N-dimethylmorpholinium)PbI3 ((DMML)PbI3 ). Notably, (IDMML)PbI3 shows the narrow bandgap energy (≈2.34 eV) according to the ultraviolet-visible absorption spectrum and the theoretical calculation, and possesses the evident photoconductive characteristic with the on/off ratio of current of ≈50 under the 405 nm light irradiation. This work provides a new case for the ferroelastic OLHPs and will inspire intriguing research in the field of optoelectronic.

Enhancing Crystallization in Hybrid Perovskite Solar Cells Using Thermally Conductive 2D Boron Nitride Nanosheet Additive.

Controlling crystallization and grain growth is crucial for realizing highly efficient hybrid perovskite solar cells (PSCs). In this work, enhanced PSC photovoltaic performance and stability by accelerating perovskite crystallization and grain growth via 2D hexagonal boron nitride (hBN) nanosheet additives incorporated into the active perovskite layer are demonstrated. In situ X-ray scattering and infrared thermal imaging during the perovskite annealing process revealed the highly thermally conductive hBN nanosheets promoted the phase conversion and grain growth in the perovskite layer by facilitating a more rapid and spatially uniform temperature rise within the perovskite film. Complementary structural, physicochemical, and electrical characterizations further showed that the hBN nanosheets formed a physical barrier at the perovskite grain boundaries and the interfaces with charge transport layers, passivating defects, and retarding ion migration. As a result, the power conversion efficiency of the PSC is improved from 17.4% to 19.8%, along with enhanced device stability, retaining ≈90% of the initial efficiency even after 500 h ambient air storage. The results not only highlight 2D hBN as an effective additive for PSCs but also suggest enhanced thermal transport as one of the pathways for improved PSC performance by 2D material additives in general.

Photophysics of Two-Dimensional Semiconducting Organic-Inorganic Metal-Halide Perovskites.

Two-dimensional organic-inorganic hybrid perovskites (2DHPs) consist of alternating anionic metal-halide and cationic organic layers. They have widely tunable structural and optical properties. We review the role of the organic cation in defining the structural and optical properties of 2DHPs through the example of lead iodide 2DHPs. Even though excitons reside in the metal-halide layers, the organic and inorganic frameworks cannot be separated-they must be considered as a single unit to fully understand the photophysics of 2DHPs. We correlate cation-induced distortion and disorder in the inorganic lattice with the resulting optical properties. We also discuss the role of the cation in creating and altering the discrete excitonic structure that appears at cryogenic temperatures in some 2DHPs, including the cation-dependent presence of hot-exciton photoluminescence. We conclude our review with an outlook for 2DHPs, highlighting existing gaps in fundamental knowledge as well as potential future applications.

Recent advances of two-dimensional material additives in hybrid perovskite solar cells.

Perovskite solar cells (PSCs) have become one of the state-of-the-art photovoltaic technologies due to their facile solution-based fabrication processes combined with extremely high photovoltaic performance originating from excellent optoelectronic properties such as strong light absorption, high charge mobility, long free charge carrier diffusion length, and tunable direct bandgap. However, the poor intrinsic stability of hybrid perovskites under environmental stresses including light, heat, and moisture, which is often associated with high defect density in the perovskite, has limited the large-scale commercialization and deployment of PSCs. The use of process additives, which can be included in various subcomponent layers in the PSC, has been identified as one of the effective approaches that can address these issues and improve the photovoltaic performance. Among various additives that have been explored, two-dimensional (2D) materials have emerged recently due to their unique structures and properties that can enhance the photovoltaic performance and device stability by improving perovskite crystallization, defect passivation, and charge transport. Here, we provide a review of the recent progresses in 2D material additives for improving the PSC performance based on key representative 2D material systems, including graphene and its derivatives, transitional metal dichalcogenides, and black phosphorous, providing a useful guideline for further exploiting unique nanomaterial additives for more efficient and stable PSCs in the near future.

Interfacial Interaction Enables Enhanced Mobility in Hybrid Perovskite-Conjugated Polymer Transistors with High-k Fluorinated Polymer Dielectrics.

The charge carrier mobility of organic field-effect transistors (OFETs) has been remarkably improved through several engineering approaches and techniques by targeting pivotal parts. Herein, an ultrathin perovskite channel layer that boosts the field-effect mobility of conjugated polymer OFETs by forming perovskite-conjugated polymer hybrid semiconducting channel is introduced. The optimized lead-iodide-based perovskite-conjugated polymer hybrid channel transistors show enhanced hole mobility of over 4 cm2  V-1  s-1 (average = 2.10 cm2  V-1  s-1 ) with high reproducibility using a benchmark poly(3-hexylthiophene) (P3HT) polymer and employing high-k fluorinated polymer dielectrics. A significant hole carrier mobility enhancement of ≈200-400% in benzo[1,2-b:4,5:b']dithiophene (BDT)-based conjugated polymers is also demonstrated by exploring certain interactive groups with perovskite. This significant enhancement in the transistor performance is attributed to the increased charge carrier density in the hybrid semiconducting channel and the perovskite-polymer interactions. The findings of this paper demonstrate an exceptional engineering approach for carrier mobility enhancement in hybrid perovskite-conjugated-polymer-based electronic devices.

Structure, Luminescence and Temperature Detection Capability of [C(NH2)3]M(HCOO)3 (M = Mg2+, Mn2+, Zn2+) Hybrid Organic-Inorganic Formate Perovskites Containing Cr3+ Ions.

Metal-organic frameworks are of great interest to scientists from various fields. This group also includes organic-inorganic hybrids with a perovskite structure. Recently their structural, phonon, and luminescent properties have been paid much attention. However, a new way of characterization of these materials has become luminescence thermometry. Herein, we report the structure, luminescence, and temperature detection ability of formate organic-inorganic perovskite [C(NH2)3]M(HCOO)3 (Mg2+, Mn2+, Zn2+) doped with Cr3+ ions. Crystal field strength (Dq/B) and Racah parameters were determined based on diffuse reflectance spectra. It was shown that Cr3+ ions are positioned in the intermediate crystal field or close to it with a Dq/B range of 2.29-2.41. The co-existence of the spin-forbidden and spin-allowed transitions of Cr3+ ions enable the proposal of an approach for remote readout of the temperature. The relative sensitivity (Sr) can be easily modified by sample composition and Cr3+ ions concentration. The luminescent thermometer based on the 2E/4T2g transitions has the relative sensitivity Sr of 2.08%K-1 at 90 K for [C(NH2)3]Mg(HCOO)3: 1% Cr3+ and decrease to 1.20%K-1 at 100 K and 1.08%K-1 at 90 K for Mn2+ and Zn2+ analogs, respectively.

Probing Methyl Group Tunneling in [(CH3)2NH2][Zn(HCOO)3] Hybrid Perovskite Using Co2+ EPR.

At low temperature, methyl groups act as hindered quantum rotors exhibiting rotational quantum tunneling, which is highly sensitive to a local methyl group environment. Recently, we observed this effect using pulsed electron paramagnetic resonance (EPR) in two dimethylammonium-containing hybrid perovskites doped with paramagnetic Mn2+ ions. Here, we investigate the feasibility of using an alternative fast-relaxing Co2+ paramagnetic center to study the methyl group tunneling, and, as a model compound, we use dimethylammonium zinc formate [(CH3)2NH2][Zn(HCOO)3] hybrid perovskite. Our multifrequency (X-, Q- and W-band) EPR experiments reveal a high-spin state of the incorporated Co2+ center, which exhibits fast spin-lattice relaxation and electron spin decoherence. Our pulsed EPR experiments reveal magnetic field independent electron spin echo envelope modulation (ESEEM) signals, which are assigned to the methyl group tunneling. We use density operator simulations to extract the tunnel frequency of 1.84 MHz from the experimental data, which is then used to calculate the rotational barrier of the methyl groups. We compare our results with the previously reported Mn2+ case showing that our approach can detect very small changes in the local methyl group environment in hybrid perovskites and related materials.

Synthesis of Organic-Inorganic Hybrid Perovskite/MOF Composites from Pb-MOF Using a Mechanochemical Method.

The specific structure and diverse properties of hybrid organic-inorganic perovskite materials make them suitable for use in photovoltaic and sensing fields. In this study, environmentally stable organic-inorganic hybrid perovskite luminescent materials using Pb-MOF as a particular lead source were prepared using a mechanochemical method. Based on the fluorescence intensity of the MAPbBr3/MOF composite, the mechanized chemical preparation conditions of Pb-MOF were optimized using response surface methodology. Then, the morphological characteristics of the MAPbBr3/MOF composite at different stages were analyzed using electron microscopy to explore its transformation and growth process. Furthermore, the composite form of MAPbBr3 with Pb-MOF was studied using XRD and XPS, and the approximate content of MAPbBr3 in the composite material was calculated. Benefiting from the increase in reaction sites generated from the crush of Pb-MOF during mechanical grinding, more MAPbBr3 was generated with a particle size of approximately 5.2 nm, although the morphology of the composite was significantly different from the initial Pb-MOF. Optimal performance of MAPbBr3/MOF was obtained from Pb-MOF prepared under solvent-free conditions, with a milling time of 30 min, milling frequency of 30 Hz and ball-material of 35:1. It was also confirmed that the mechanochemical method had a good universality in preparing organic-inorganic hybrid perovskite/MOF composites.

Stereochemically Active Lone Pair Induced Polar Tri-layered Perovskite for Record-Performance Polarized Photodetection.

Bulk photovoltaic effect, a promising optoelectronic phenomenon for generating polarized dependent steady-state photocurrent, has been widely applied in various photodetectors. However, incorporating stereochemically active lone pair to construct bulk photovoltage in organic-inorganic hybrid perovskite (OIHP) is still elusive and challenging. Herein, bulk photovoltage (1.2 V) has been successfully achieved by introducing the stereo-chemically active lone pair perovskitizer to construct a polar tri-layered hybrid perovskite, namely, (IBA)2 MHy2 Pb3 Br10 (1, IBA=iso-butylamine, MHy=methylhydrazine). Strikingly, owning to the promising bulk photovoltage, 1-based detectors exhibit an ultra-highly sensitive polarized photodetection (polarization ratio of up to 24.6) under self-powered mode. This ratio surpasses all the reported two-dimension OIHP single-crystal photodetectors. In addition, detectors exhibit outstanding responsivity (≈200 mA W-1 ) and detectivity (≈2.4×1013 Jones). More excitingly, further investigation confirms that lone pair electrons in MHy+ result in the separation of positive and negative charges to produce directional dipoles, which further directional alignment to generate bulk photovoltage, thereby resulting in polarization-dependent photocurrent. Our findings provide a new demonstration for polar multilayer materials' construction and may open opportunities for a host of high-sensitive polarized photodetection.

Bulk Photovoltaic Effect Along the Nonpolar Axis in Organic-Inorganic Hybrid Perovskites.

The origin of the bulk photovoltaic effect (BPVE) was considered as a built-in electric field formed by the macroscopic polarization of materials. Alternatively, the "shift current mechanism" has been gradually accepted as the more appropriate description of the BPVE. This mechanism implies that the photocurrent generated by the BPVE is a topological current featuring an ultrafast response and dissipation-less nature, which is very attractive for photodetector applications. Meanwhile, the origin of the BPVE in organic-inorganic hybrid perovskites (OIHPs) has not been discussed and is still widely accepted as the classical mechanism without any experimental evidence. Herein, we observed the BPVE along the nonpolar axis in OIHPs, which is inconsistent with the classical explanation. Furthermore, based on the nonlinear optical tensor correlation, we substantiated that the BPVE in OIHPs is originated in the shift current mechanism.

Managing Secondary Phase Lead Iodide in Hybrid Perovskites via Surface Reconstruction for High-Performance Perovskite Solar Cells with Robust Environmental Stability.

Rationally managing the secondary-phase excess lead iodide (PbI2 ) in hybrid perovskite is of significance for pursuing high performance perovskite solar cells (PSCs), while the challenge remains on its conversion to a homogeneous layer that is robust stable against environmental stimuli. We herein demonstrate an effective strategy of surface reconstruction that converts the excess PbI2 into a gradient lead sulfate-silica bi-layer, which substantially stabilizes the perovskite film and reduces interfacial charge transfer barrier in the PSCs device. The perovskite films with such bi-layer could bear harsh conditions such as soaking in water, light illumination at 70 % relative humidity, and the damp-thermal (85 °C and 30 % humidity) environment. The resulted PSCs deliver a champion efficiency up to 24.09 %, as well as remarkable environmental stability, e.g., retaining 78 % of their initial efficiency after 5500 h of shelf storage, and 82 % after 1000 h of operational stability testing.

Two-Step Dielectric Responsive Organic-Inorganic Hybrid Material with Mid-Band Light Emission.

Hybrid organic-inorganic perovskite (HOIP) have received tremendous scientific attention because of the phase transition and photovoltaic properties. However, achieving the special perovskite structure with both two-step dielectric response and luminescence characteristics is rarely reported. Herein, we report an organic-inorganic hybrid perovskite, [(BA)2 ⋅ PbI4 ] (Compound 1, BA=n-butylamine) by introducing flexible organic cations (HBA+ ), with direct mid-band gap as 2.28 eV. Interestingly, this material exhibits two-step reversible dielectric response at 350 K and 460 K (in heating process), respectively. Besides, the photoluminescence was found: it emits charming green light under 365 nm lamp (Photoluminescence quantum yield is 9.52 %). The outstanding two-step dielectric response and luminescence characteristics of this compound might pave the way for the application of dielectric and ferroelectric functional materials in temperature sensors and mechanical switches.

MAPbBr3nanocrystals from aqueous solution for poly(methyl methacrylate)-MAPbBr3nanocrystal films with compression-resistant photoluminescence.

In this work, we develop an environmental-friendly approach to produce organic-inorganic hybrid MAPbBr3(MA = CH3NH3) perovskite nanocrystals (PeNCs) and PMMA-MAPbBr3NC films with excellent compression-resistant PL characteristics. Deionized water is used as the solvent to synthesize MAPbBr3powder instead of conventionally-used hazardous organic solvents. The MAPbBr3PeNCs derived from the MAPbBr3powder exhibit a high photoluminescence quantum yield (PLQY) of 93.86%. Poly(methyl methacrylate) (PMMA)-MAPbBr3NC films made from the MAPbBr3PeNCs retain ∼97% and ∼91% of initial PL intensity after 720 h aging in ambient environment at 50 °C and 70 °C, respectively. The PMMA-MAPbBr3NC films also exhibit compression-resistant photoluminescent characteristics in contrast to the PMMA-CsPbBr3NC films under a compressive stress of 1.6 MPa. The PMMA-MAPbBr3NC film integrated with a red emissive film and a blue light emitting source achieves an LCD backlight of ∼114% color gamut of National Television System Committee (NTSC) 1953 standard.

Three-Dimensional Perovskite Nanopixels for Ultrahigh-Resolution Color Displays and Multilevel Anticounterfeiting.

Hybrid perovskites are emerging as a promising, high-performance luminescent material; however, the technological challenges associated with generating high-resolution, free-form perovskite structures remain unresolved, limiting innovation in optoelectronic devices. Here, we report nanoscale three-dimensional (3D) printing of colored perovskite pixels with programmed dimensions, placements, and emission characteristics. Notably, a meniscus comprising femtoliters of ink is used to guide a highly confined, out-of-plane crystallization process, which generates 3D red, green, and blue (RGB) perovskite nanopixels with ultrahigh integration density. We show that the 3D form of these nanopixels enhances their emission brightness without sacrificing their lateral resolution, thereby enabling the fabrication of high-resolution displays with improved brightness. Furthermore, 3D pixels can store and encode additional information into their vertical heights, providing multilevel security against counterfeiting. The proof-of-concept experiments demonstrate the potential of 3D printing to become a platform for the manufacture of smart, high-performance photonic devices without design restrictions.