Transient chirality inversion during racemization of a helical cobalt(III) complex.

SignificanceWe first observed a transient chirality inversion on a simple unimolecular platform during the racemization of a chiral helical complex [LCo3A6]3+, i.e., the helicity changed from P-rich (right-handed) to M-rich (left-handed), which then racemized to a P/M equimolar mixture in spite of the absence of a reagent that could induce the M helix. This transient chirality inversion was observed only in the forward reaction, whereas the reverse reaction showed a simple monotonic change with an induction time. Consequently, the M helicity appeared only in the forward reaction. These forward and reverse reactions constitute a hysteretic cycle. Compounds showing such unique time responses would be useful for developing time-programmable switchable materials that can control the physical/chemical properties in a time-dependent manner.

Near-Infrared Dual-Band LSPR Coupling in Oriented Assembly of Doped Metal Oxide Nanocrystal Platelets.

Coupling effects of localized surface plasmon resonance (LSPR) represent an efficient means to tune the plasmonic modes and to enhance the near-field. While LSPR coupling in metal nanoparticles has been extensively explored, limited attention has been given to heavily doped semiconductor nanocrystals. Here, we investigate the LSPR coupling behavior of Cs-doped tungsten oxide (CsxWO3-δ) nanocrystal platelets as they undergo an oriented assembly into parallel stacks. The oriented assembly was achieved by lowering the dispersion stability of the colloidal nanoplatelets, of which the basal surface was selectively ligand-functionalized. This assembly induces simultaneous blue-shifts and red-shifts of dual-mode LSPR peaks without compromising the intensity and quality factor. This stands in contrast to the significant damping, broadening, and overall red-shift of the LSPR observed in random assemblies. Computational simulations successfully replicate the experimental observations, affirming the potential of this coupling phenomenon of near-infrared dual-mode LSPR in diverse applications including solar energy, bio-optics, imaging, and telecommunications.

Ruddlesden-Popper Perovskite Nanocrystals as Interface Modification Layer for Efficient Perovskite Solar Cells.

Perovskite nanocrystals are advantageous for interfacial passivation of perovskite solar cells (PSCs), but the insulating long alkyl chain surface ligands impede the charge transfer, while the conventional ligand exchange would possibly introduce surface defects to the nanocrystals. In this work, we reported novel in situ modification of CsPbBr3 nanocrystals using a short chain conjugated molecule 2-methoxyphenylethylammonium iodide (2-MeO-PEAI) for interfacial passivation of PSCs. Transmission electron microscopy studies with atomic resolution unveil the transformation from cubic CsPbBr3 to Ruddlesden-Popper phase (RPP) nanocrystals due to halogen exchange. Synergic passivation by the RPP nanocrystals and 2-MeO-PEA+ has led to suppressed interface defects and enhanced charge carrier transport. Consequently, PSCs with in situ modified RPP nanocrystals achieved a champion power conversion efficiency of 24.39%, along with an improvement in stability. This work brings insights into the microstructural evolution of perovskite nanocrystals, providing a novel and feasible approach for interfacial passivation of PSCs.

AFM-IR of Electrohydrodynamically Printed PbS Quantum Dots: Quantifying Ligand Exchange at the Nanoscale.

Colloidal quantum dots (cQDs), semiconductor materials with widely tunable properties, can be printed in submicrometer patterns through electrohydrodynamic printing, avoiding aggressive photolithography steps. Postprinting ligand exchange determines the final optoelectronic properties of the cQD structures. However, achieving a complete bulk exchange is challenging, and the conventional vibrational analysis lacks the required spatial resolution. Infrared nanospectroscopy enables quantitative analysis of vibrational signals and structural topography on the nanometer scale upon ligand substitution on lead sulfide cQDs. A solution of ethanedithiol led to rapid (∼60 s) exchange of ≤90% of the ligands, in structures up to ∼750 nm thick. Prolonged exposures (>1 h) caused the degradation of the microstructures, with a systematic removal of cQDs regulated by surface:bulk ratios and solvent interactions. This study establishes a method for the development of devices through a combination of tunable photoactive materials, additive manufacturing of microstructures, and their quantitative nanometer-scale analysis.

Surface Engineering Enables Efficient AgBiS2 Quantum Dot Solar Cells.

Surface ligand chemistry is vital to control the synthesis, diminish surface defects, and improve the electronic coupling of quantum dots (QDs) toward emerging applications in optoelectronic devices. Here, we successfully develop highly homogeneous and dispersed AgBiS2 QDs, focus on the control of interdot spacing, and substitute the long-chain ligands with ammonium iodide in solution. This results in improved electronic coupling of AgBiS2 QDs with excellent surface passivation, which greatly facilitates carrier transport within the QD films. Based on the stable AgBiS2 QD dispersion with the optimal ligand state, a homogeneous and densely packed QD film is prepared by a facile one-step coating process, delivering a champion power conversion efficiency of approximately 8% in the QD solar cells with outstanding shelf life stability. The proposed surface engineering strategy holds the potential to become a universal preprocessing step in the realm of high-performance QD optoelectronic devices.

Water-Soluble Alumina-Coated Indium Phosphide Core-Shell Quantum Dots with Efficient Deep-Red Emission Beyond 700 nm.

Solution-processed colloidal III-V semiconductor-based quantum dots (QDs) represent promising and environmentally-friendly alternatives to Cd-based QDs in the realms of optoelectronics and biological applications. While InP-based core-shell QDs have demonstrated efficient light-emitting diode (LED) performance in the visible region, achieving deep-red emission (above 700 nm) with a narrow linewidth has proven challenging. Herein, the study presents a novel strategy for synthesizing InP/ZnSe/ZnS core-shell-shell QDs tailored for emission in the first biological transparency window. The resulting QDs exhibit an emission wavelength up to 725 nm with a narrow peak full width at half maximum (FWHM) down to 107 meV (45 nm). To enhance the biocompatibility and chemical stability of the QDs, their surface is further capped with a layer of amorphous alumina resulting in an InP/ZnSe/ZnS/Al2O3 heterostructure. This surface passivation not only ensures environmental- and photostability but also enhances the photoluminescence quantum yield (PLQY). The alumina capping enables the aqueous phase transfer via surface ligand exchange using mercaptopropionic acid (MPA) while maintaining the initial quantum yield. The resulting QDs demonstrate a significant potential for advancing next-generation optoelectronic technologies and bio-applications.

Strongly-Confined CsPbBr3 Perovskite Quantum Dots with Ultralow Trap Density and Narrow Size Distribution for Efficient Pure-Blue Light-Emitting Diodes.

The development of pure-blue perovskite light-emitting diodes (PeLEDs) faces challenges of spectral stability and low external quantum efficiency (EQE) due to phase separation in mixed halide compositions. Perovskite quantum dots (QDs) with strong confinement effects are promising alternatives to achieve high-quality pure-blue PeLEDs, yet their performance is often hindered by the poor size distribution and high trap density. A strategy combining thermodynamic control with a polishing-driven ligand exchange process to produce high-quality QDs is developed. The strongly-confined pure-blue (≈470 nm) CsPbBr3 QDs exhibit narrow size distribution (12% dispersion) and are achieved in Br-rich ion environment based on growth thermodynamic control. Subsequent polishing-driven ligand exchange process removes imperfect surface sites and replaces initial long-chain organic ligands with short-chain benzene ligands. The resulting QDs exhibit high photoluminescence quantum yield (PLQY) to near-unity. The resulting PeLEDs exhibit a pure-blue electroluminescence (EL) emission at 472 nm with narrow full-width at half-maximum (FWHM) of 25 nm, achieving a maximum EQE of 10.7% and a bright maximum luminance of 7697 cd m-2. The pure-blue PeLEDs show ultrahigh spectral stability under high voltage, a low roll-off of EQE, and an operational half-lifetime (T50) of 127 min at an initial luminance of 103 cd m-2 under continuous operation.

Stabilization of Lantern-Type Metal-Organic Cages (MOCs) by Protective Control of Ligand Exchange Rates.

Self-assembling systems in nature display remarkable complexity with assemblies of different sub-units to generate functional species. Synthetic analogues of such systems are a challenge, often requiring the ability to bias distributions that are under thermodynamic assembly control. Using lantern-type MOCs (metal-organic cages) as a prototypical self-assembling system, herein we explore the role that steric bulk plays in controlling the exchange rate of ligands in paddlewheel-based assemblies, and thus the stability of cages, in competitive self-assembling scenarios. The effective lifetime of the lantern-type MOCs varies over an order of magnitude depending on the steric bulk proximal to the metal nodes with lifetimes of the cages ranging from tens of minutes to several hours. The bulk of the coordinating solvents likewise reduces the rate of ligand exchange, and thus yields longer-lived species. Understanding this subtle effect has implications for controlling the stability of complex assemblies in competitive environments with implications for guest release and application.

Chiral Amphiphilic Au23 Cluster and Its Specific Recognition to Remote Di-amines.

The atomic precision of metal nanoclusters and variability of surface ligands pave the way for its rational design and functionalization, whereas the property strengthening in multiple ways has been long challenging. Herein, improved amphiphilicity, chirality, thermostability, and strong CPL (circularly polarized luminescence) properties have been accomplished by facile ligand exchange of [Au23(CHT)16]- with HCapt (HCHT and HCapt denote cyclohexanethiol and captopril). In addition, the obtained chiral [Au23(SR)16]- (short for [Au23(CHT)16-x(Capt)x]-) clusters show specific binding affinity to remote-diamines (such as arginine and single/double strand DNA), originating from the hydrogen bonding and Van der Walls interaction among the surface Capt ligands and the di-amine groups.

Facile Synthesis and Characterization of Uniform Au Nanospheres Capped by Citrate for Biomedical Applications.

We report a simple and versatile method for effectively replacing the toxic ligands, such as cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC), on the surface of Au nanospheres with different sizes by citrate. The method involves the deposition of an ultrathin shell of fresh Au in the presence of sodium citrate at an adequate concentration. After the ligand exchange process, multiple techniques are used to confirm that the surface of the resultant Au nanospheres is covered by citrate while there is no sign of aggregation. We also demonstrate the mitigation of cell toxicity after exchanging the surface-bound CTAB/CTAC with citrate, opening the door to a range of biomedical applications.

Selective Manipulation of Well-Defined Trinuclear Pd(II)-Complexes.

Several strategies are available to design well-defined multimetallic molecular entities bearing functional ligands. Substoichiometric exchange reactions in the coordination sphere of pre-existing multinuclear precursors are relatively underexploited in this context. Palladium(II) acetate is not a mononuclear compound in the solid state but rather exists as a trimer, i. e. [Pd3(OAc)6]. Although this material is ubiquitously used to synthesize mononuclear Pd species, it may principally also lend itself to selective exchange of some of the edge-sharing acetate units in its triangular motif, whilst keeping the overall multinuclear architecture intact. Strikingly, little is known about the controlled manipulation and substoichiometric substitution chemistry of this well-defined conglomerate. We herein conclusively demonstrate that, for the first time, the targeted exchange of two or four acetate units from the Pd3(acetate)6 platform is possible, thereby installing either one or two new tridentate ligands onto this trinuclear architecture. Follow-up exchange and substitution chemistry is available without disrupting the multimetallic nature of the core structure. New complexes 2-7 are all conclusively characterized using multinuclear NMR spectroscopy, UV-vis and IR spectroscopy as well as X-ray diffraction analysis.

Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra.

The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts.

Phenylethylammonium bromide-assisted solution-phase ligand exchange in CsPbBr3quantum dot solar cells.

CsPbBr3quantum dots (QDs) have excellent optical properties and good phase stability, but the long-chain ligands on their surfaces affect the charge transfer between QDs. Here, we propose a simple ligand exchange strategy: solution-phase ligand exchange. By adding an acetone solution of phenylethylammonium bromide to the purification process of CsPbBr3QDs, the long-chain ligands were effectively replaced and the electric coupling between QDs was improved. As a result, the power conversion efficiency of the solar cell was increased from 1.95% to 2.83%. Meanwhile, the stability of the devices was significantly improved in the unencapsulated case.

Dipolar Ligands Tune Plasmonic Properties of Tin-Doped Indium Oxide Nanocrystals.

Surface functionalization with dipolar molecules is known to tune the electronic band alignment in semiconductor films and colloidal quantum dots. Yet, the influence of surface modification on plasmonic nanocrystals and their properties remains little explored. Here, we functionalize tin-doped indium oxide nanocrystals (ITO NCs) via ligand exchange with a series of cinnamic acids with different electron-withdrawing and -donating dipolar characters. Consistent with previous reports on semiconductors, we find that withdrawing (donating) ligands increase (decrease) the work function caused by an electrostatic potential shift across the molecular layer. Quantitative analyses of the plasmonic extinction spectra reveal that varying the ligand molecular dipole affects the near-surface depletion layer, with an anticorrelated trend between the electron concentration and electronic volume fraction, factors that are positively correlated in as-synthesized NCs. Electronic structure engineering through surface modification provides access to distinctive combinations of plasmonic properties that could enable optoelectronic applications, sensing, and hot electron-driven processes.

Cleavage of Carbodicarbenes with N2O for Accessing Stable Diazoalkenes: Two-fold ligand exchange at a C(0)-atom.

The cleavage of carbophosphinocarbenes and carbodicarbenes with nitrous oxide (N2O) leads to the formation of room-temperature stable diazoalkenes. The utility of Ph3P/N2 and NHC/N2 ligand exchange reactions were demonstrated by accessing novel benzimidazole- and benzothiazole derived diazoalkenes, which are not accessible by the current state-of-the-art methods. The stable diazoalkenes subsequently allow further ligand exchange reactions at C(0) with carbon monoxide, isocyanide, or a diamidocarbene (DAC). Overall, the combination of hitherto unknown NHC/N2 and N2/L (L = DAC, CO, R-NC) ligand exchange reactions at a C(0) center allow the selective functionalization of the carbodicarbene ligand structure which represents a new methodology to rapidly assemble novel carbodicarbenes or cumulenic compounds.

Leveraging Ligand Steric Demand to Control Ligand Exchange and Domain Composition in Stratified Metal-Organic Frameworks.

Incorporating diverse components into metal-organic frameworks (MOFs) can expand their scope of properties and applications. Stratified MOFs (sMOFs) consist of compositionally unique concentric domains (strata), offering unprecedented complexity through partitioning of structural and functional components. However, the labile nature ofmetal-ligand coordination handicaps achieving compositionally-distinct domains due to ligand exchange reactions occurring concurrently with secondary strata growth. To achieve complex sMOF compositions, characterizing and controlling the competing processes of new strata growth and ligand exchange are vital. This work systematicallyexamines controlling ligand exchange in UiO-67 sMOFs by tuning ligand sterics. We present quantitative methods for assessing and visualizing the outcomes of strata growth and ligand exchange that rely on high-angle annular dark-field images and elemental mapping via scanning transmission electron microscopy-energy dispersive X-ray spectroscopy. In addition, we leverage ligand sterics to create 'blocking layers' that minimize ligand exchange between strata which are particularly susceptible to ligand exchange and inter-strata ligand mixing. Finally, we evaluate strata compositional integrity in various solvents and find that sMOFs can maintain their compositions for >12 months in some cases.Collectively, these studies and methods enhance understanding and control over ligand placement in multi-domain MOFs, factors that underscore careful tunning of properties and function.

A Preference for Heterolepticity - Schlenk Type Equilibria in Organometallic Beryllium Systems.

The reaction of homoleptic beryllium halide with diphenyl beryllium complexes leads to the clean formation of heteroleptic beryllium Grignard compounds [(L)1-2 BePhX]1-2 (X=Cl, Br, I; L=C-, N-, O-donor ligand). The influence of ligands and solvent on these compounds, their formation and exchange equilibria in solution were investigated, together with the factors determining the complex constitution.

Neutral, Heteroleptic [Cu(I)(PPh3 )2 (4H-imidazolato)] Complexes: Ligand Exchange Reactivity, Redox Properties, Excited-State Dynamics.

Cu(I) 4H-imidazolate complexes are rare examples of Cu(I) complexes with chelating anionic ligands and are potent photosensitizers with unique absorption and photoredox properties. In this contribution, five novel heteroleptic Cu(I) complexes with monodentate triphenylphosphine co-ligands are investigated. As a consequence of the anionic 4H-imidazolate ligand and in contrast to comparable complexes with neutral ligands, these complexes are more stable than their homoleptic bis(4H-imidazolato)Cu(I) congeners. Here, the ligand exchange reactivity was studied by 31 P-,19 F-, and variable temperature NMR and the ground state structural and electronic properties by X-ray diffraction, absorption spectroscopy, and cyclic voltammetry. The excited-state dynamics were investigated by femto- and nanosecond transient absorption spectroscopy. The observed differences, with respect to chelating bisphosphine bearing congeners, are often due to the increased geometric flexibility of the triphenylphosphines. These observations render the investigated complexes interesting candidates for photo(redox)reactions not accessible with chelating bisphosphine ligands.

Determination of Monosodium Glutamate in Noodles Using a Simple Spectrofluorometric Method based on an Emission Turn-on Approach.

A simple, fast, and ecofriendly spectrofluorometric method was developed and validated for determination of mono sodium glutamate (MSG). The method depended on the reaction between MSG and iron (III) salicylate based on ligand exchange mechanism. Addition of MSG turned-on the fluorescent response of iron (III) salicylate at λem 411 nm. Reaction conditions including reagent concentration, pH, and time were optimized. The method was validated regarding the ICH guidelines. The method determined MSG within the linearity range of 25-250 µM with a coefficient of determination of 0.9967 and a calculated limit of detection of 1.73 µM. Furthermore, the developed method was successfully applied for the determination of MSG in food preparation (instant noodles). The results were compared to those obtained by a published HPLC method using t-test and F-test at 95% confidence interval; no statistically significant difference was found. Based on the analytical Eco-scale and the green analytical procedure index (GAPI), the developed method was assessed to be greener than the published HPLC method. The developed method offered advantages over other spectrophotometric reported methods and was convenient for routine determination of MSG in foodstuffs.

Chiral MOFs encapsulated by polymers with poly-metallic coordination as chiral biosensors.

Chiral materials have drawn the widespread attention for their its chiral recognition ability. The design and synthesis of chiral material are of importance owing to the unpredictability in controlling chirality during the synthesis process. To circumvent problems, a chiral MOF (D-His-ZIF-8) was synthesized by ligand exchange of 2-methylimidazole (Hmim) on ZIF-8 by D-histidine (D-His), which can be treated as chiral host to distinguish amino acid enantiomers. The obtained D-His-ZIF-8 can provide chiral nanochannels for amino acid guests. Meanwhile, polynary transition-metal ion (Co2+ and Fe3+) coordinating with polydopamine (PDA) wrapped on the surface of D-His-ZIF-8 can increase the active sites. The electrochemical chiral recognition behavior showed that D-His-ZIF-8@CoFe-PDA exhibited good recognition of the tryptophan enantiomer (L/D-Trp) (working potential of -0.2 V vs. Hg/HgCl2). The LOD and LOQ of L-Trp were 0.066 mM and 0.22 mM, respectively, while the LOD and LOQ of D-Trp were 0.15 mM and 0.50 mM, respectively. Finally, the usefulness of D-His-ZIF-8@CoFe-PDA/GCE was evaluated with a recovery of 94.4-103%. The analysis of real  samples shows that D-His-ZIF-8@CoFe-PDA/GCE is a feasible sensing platform for the detection of L-Trp and D-Trp.