Challenges and Strategies for Synthesizing High Performance Micro and Nanoscale High Entropy Oxide Materials.

High-entropy oxide micro/nano materials (HEO MNMs) have shown broad application prospects and have become hot materials in recent years. This review comprehensively provides an overview of the latest developments and covers key aspects of HEO MNMs, by discussing design principles, computer-aided structural design, synthesis challenges and strategies, as well as application areas. The analysis of the synthesis process includes the role of high-throughput process in large-scale synthesis of HEOs MNMs, along with the effects of temperature elevation and undercooling on the formation of HEO MNMs. Additionally, the article summarizes the application of high-precision and in situ characterization devices in the field of HEO MNMs, offering robust support for related research. Finally, a brief introduction to the main applications of HEO MNMs is provided, emphasizing their key performances. This review offers valuable guidance for future research on HEO MNMs, outlining critical issues and challenges in the current field.

Nano fertilizer synergist effects on nitrogen utilization and related gene expression in wheat.

The application of nano materials is one of the current hot spots in agricultural production. The aim of this work was to evaluate the effects of different nano fertilizer synergists on nitrogen (N) utilization and related gene expression in wheat. The experiments were carried out in pot and field conditions at the West-Coast Economic New Area experimental base and Greenhouse of Qingdao Agricultural University. Seven treatments were set up: CK (compound fertilizer), T1 (compound fertilizer + 0.3% nano carbon synergist), T2 (compound fertilizer + 0.3% nano calcium carbonate synergist), T3 (compound fertilizer + 0.3% composite nano synergist), T4 (70% compound fertilizer + 0.3% nano carbon synergist), T5 (70% compound fertilizer + 0.3% nano calcium carbonate synergist), T6 (70% compound fertilizer + 0.3% composite nano synergist). The results showed that compared with CK, the N accumulation of T1, T2, T3, T4, T5 and T6 increased by 40-50%, 30-40%, 55-65%, 20-30%, 15-20% and 30-40%, respectively; and the N use efficiency increased by 12-19%, 9-18%, 16-22%, 5-17%, 4-16% and 10-20% respectively. And the gene expression levels of TaNRT2.2, TaNRT2.3, TaGS1 and TaGS2 in the treatments with synergistic phosphate fertilizer were significantly higher than those in the CK. The application of nano fertilizer synergist can significantly improve N accumulation, N use efficiency, and promote the expression of genes related to N transport and metabolism.

Aminal-Linked Covalent Organic Frameworks with hxl-a and Quasi-hcb Topologies for Efficient C2 H6 /C2 H4 Separation.

In reticular chemistry, topology is a powerful concept for defining the structures of covalent organic frameworks (COFs). However, due to the lack of diversity in the symmetry and reaction stoichiometry of the monomers, only 5% of the two-dimensional topologies have been reported to be COFs. To overcome the limitations of COF connectivity and pursue novel topologies in COF structures, two aminal-linked COFs, KUF-2 and KUF-3, are prepared, with dumbbell-shaped secondary building units. Linear dialdehydes and piperazine are condensed at a ratio of 1:2 to construct an aminal linkage, leading to unreported hxl-a (KUF-2) and quasi-hcb (KUF-3) structures. Notably, KUF-3 displays top-tier C2 H6 /C2 H4 selectivity and C2 H6 uptake at 298 K, outperforming most porous organic materials. The intrinsic aromatic ring-rich and Lewis basic pore environments, and appropriate pore widths enable the selective adsorption of C2 H6 , as confirmed by Grand Canonical Monte Carlo simulations. Dynamic breakthrough curves revealed that C2 H6 can be selectively separated from a gas mixture of C2 H6 and C2 H4 . This study suggests that topology-based design of aminal-COFs is an effective strategy for expanding the field of reticular chemistry and provides the facile integration of strong Lewis basic sites for selective C2 H6 /C2 H4 separation.

A new spectrophotometric method for uric acid detection based on copper doped mimic peroxidase.

Cascade reactions catalyzed by natural uricase and mimic peroxidase (MPOD) have been applied for uric acid (UA) detection. However, the optimal catalytic activity of MPOD is mostly in acidic conditions (pH 2-5), mismatching the optimal catalytic alkaline environment of uricase. In this paper, using CuSO4 and urea as raw materials, a MPOD with high catalytic activity in alkaline environment was synthesized by hydrothermal method. Then, based on coupling reaction of uricase/UA/MPOD/guaiacol (GA) system, a novel spectrophotometric method was established to detect 5-60 µmol/L UA (limit of detection = 3.14 µmol/L (S/N = 3)) and accurately quantified serum UA (275.6 ± 39.9 µmol/L, n = 5) with 95-105% of standard addition recovery. The results were consistent with commercial UA kit (p > 0.05). The MPOD could replace natural POD to reduce the cost of UA detection due to simple preparation and cheap raw materials, and is expected to achieve the specific detection of some substances, like glucose and cholesterol, combined with glucose oxidase and cholesterol oxidase.

Research progress of applications for nano-materials in improved QuEChERS method.

The quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach is widely used in sample pretreatment in agricultural products, food, environment, etc. And nano-materials are widely used in QuEChERS method due to its small size and large specific surface area. In this review, we examine the typical applications of several commonly used nano-materials in improved QuEChERS method. These materials include multi-walled carbon nanotubes (MWCNTs) and their derivatives, magnetic nanoparticles (MNPs), metal organic frameworks (MOFs), covalent organic frameworks (COFs), graphene oxide (GO), lipid and protein adsorbent (LPAS), cucurbituril (CBs), and carbon nano-cages (CNCs), and so on. The strengths and weaknesses of each nano-material are presented, as well as the challenging aspects that need to be addressed in future research. By comparing the applications and the current technology development, this review suggests utilizing artificial intelligence (AI) to screen suitable combinations of purification agents and performing virtual simulation experiments to verify the reliability of this methodology. By doing so, we aim to accelerate the development of new products and decrease the cost of innovation. It also recommends designing smarter pretreatment instruments to enhance the convenience and automation of the sample pretreatment process and reduce the margin for human error.

Nano-Enriched Self-Powered Wireless Body Area Network for Sustainable Health Monitoring Services.

Advances in nanotechnology have enabled the creation of novel materials with specific electrical and physical characteristics. This leads to a significant development in the industry of electronics that can be applied in various fields. In this paper, we propose a fabrication of nanotechnology-based materials that can be used to design stretchy piezoelectric nanofibers for energy harvesting to power connected bio-nanosensors in a Wireless Body Area Network (WBAN). The bio-nanosensors are powered based on harvested energy from mechanical movements of the body, specifically the arms, joints, and heartbeats. A suite of these nano-enriched bio-nanosensors can be used to form microgrids for a self-powered wireless body area network (SpWBAN), which can be used in various sustainable health monitoring services. A system model for an SpWBAN with an energy harvesting-based medium access control protocol is presented and analyzed based on fabricated nanofibers with specific characteristics. The simulation results show that the SpWBAN outperforms and has a longer lifetime than contemporary WBAN system designs without self-powering capability.

Microbial investigation of cleanability of different plastic and metal surfaces used by the food industry.

Different conveyor belt materials used by the meat and other food industries were compared, regarding their cleanability as bacterial reduction rates in relation to their surface topography. Eleven thermoplastic polymers, four stainless steels, and five aluminized nanostructured surfaces were investigated under laboratory conditions. Cleanings were conducted with water only, and with an alkaline foam detergent. Overall, scanning electron microscopy revealed remarkable differences in the surface topography of the tested surfaces. Water cleaning results showed that nanostructured aluminized surfaces achieved significantly higher cleanability rates compared to the eight thermoplastic surfaces, as well as the glass-bead blasted rough stainless steel. Thermoplastic surfaces showed overall low cleanability rates when cleaned with alkaline detergent, while stainless steel and nanoporous aluminum showed high variations. Overall, nanoporous aluminum showed promising results as it can be used to coat conveyor belts. However, compatibility with cleaning detergent and sensitivity to scratches must be further investigated. Overall, it can be concluded that cleanability is not only influenced by surface roughness, but also by the overall surface finish, scratches, and defects. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05778-0.

Preparation, Characterization and Biological Activities of an Oil-in-Water Nanoemulsion from Fish By-Products and Lemon Oil by Ultrasonication Method.

Fish by-product oil and lemon oil have potential applications as active ingredients in many industries, including cosmetics, pharmaceuticals and food. However, the physicochemical properties, especially the poor stability, compromised the usage. Generally, nanoemulsions were used as an approach to stabilize the oils. This study employed an ultrasonication method to form oil-in-water nanoemulsion of lemon and fish by-product oils (NE-FLO). The formulation is produced at a fixed amount of 2 wt% fish by-product oil, 8 wt% lemon oil, 10 wt% surfactant, 27.7 wt% co-surfactants and 42 min of ultrasonication time. The size, polydispersity index (PDI) and zeta potential obtained were 44.40 nm, 0.077, and -5.02 mV, respectively. The biological properties, including antioxidant, antibacterial, cell cytotoxicity, and anti-inflammatory, showed outstanding performance. The antioxidant activity is comparable without any significant difference with ascorbic acid as standard and is superior to pure lemon oil. NE-FLO successfully inhibits seven Gram-positive and seven Gram-negative bacterial strains. NE-FLO's anti-inflammatory activity is 99.72%, comparable to nordihydroguaiaretic acid (NDGA) as the standard. At a high concentration of 10,000 µg·mL-1, NE-FLO is non-toxic to normal skin cells. These findings demonstrate that the NE-FLO produced in this study has significant potential for usage in various industries.

Bone aluminum measured in miners exposed to McIntyre powder.

A small pilot study was conducted to test whether the technique of in vivo neutron activation analysis could measure bone aluminum levels in 15 miners who had been exposed to McIntyre Powder over 40 years prior. All miners were over 60 years of age, had worked in mines that used McIntyre Powder, and were sufficiently healthy to travel from northern to southern Ontario for the measurements. Individual aluminum levels were found to be significantly greater than zero with 95% confidence (p < 0.05) in 7 out of the 15 miners. The inverse variance weighted mean of the 15 participants was 21.77 ± 2.27µgAl/gCa. This was significantly higher (p < 0.001) than in a group of 15 non-occupationally exposed subjects of a comparable age from Southern Ontario who had been measured in a previous study. The inverse variance weighted mean bone aluminum content in the non-occupationally exposed group was 3.51 ± 0.85µgAl/gCa. Since the use of McIntyre Powder ceased in 1979, these subjects had not been exposed for more than 40 years. Calculations of potential levels at the cessation of exposure in the 1970s, using a biological half-life of aluminum in bone of 10 to 20 years predicted levels of bone aluminum comparable with studies performed in dialysis patients in the 1970s and 1980s. This pilot study has shown that the neutron activation analysis technique can determine differences in bone aluminum between McIntyre Powder exposed and non-exposed populations even though 40 years have passed since exposure ceased. The technique has potential application as a biomarker of exposure in cross-sectional studies of the health consequences of exposure to McIntyre Powder.

Metallic 2H-Tantalum Selenide Nanomaterials as Saturable Absorber for Dual-Wavelength Q-Switched Fiber Laser.

A novel 2H-phase transition metal dichalcogenide (TMD)-tantalum selenide (TaSe2) with metallic bandgap structure is a potential photoelectric material. A band structure simulation of TaSe2 via ab initio method indicated its metallic property. An effective multilayered TaSe2 saturable absorber (SA) was fabricated using liquid-phase exfoliation and optically driven deposition. The prepared 2H-TaSe2 SA was successfully used for a dual-wavelength Q-switched fiber laser with the minimum pulse width of 2.95 µs and the maximum peak power of 64 W. The repetition rate of the maximum pulse energy of 89.9 kHz was at the level of 188.9 nJ. The metallic 2H-TaSe2 with satisfactory saturable absorbing capability is a promising candidate for pulsed laser applications.

Potential Diagnostic Systems for Coronavirus Detection: a Critical Review.

ABSTRACT: Currently there are no effective anti-viral drugs for SARS-CoV-2, so the primary line of defense is to detect infected cases as soon as possible. The high rate of contagion for this virus and the highly nonspecific symptoms of the disease (Coronovirus disease 2019, (Covid-19)) that it causes, such as respiratory symptoms, cough, dyspnea, fever, and viral pneumonia, require the urgent establishment of precise and fast diagnostic tests to verify suspected cases, screen patients, and conduct virus surveillance. Nowadays, several virus detection methods are available for viral diseases, which act on specific properties of each virus or virus family, therefore, further investigations and trials are needed to find a highly efficient and accurate detection method to detect and prevent the outcomes of the disease. Hence, there is an urgent need for more and precise studies in this field. In this review, we discussed the properties of a new generation of coronaviruses (SARS-CoV-2) following routine virus detection methods and proposed new strategies and the use of potential samples for SARS-CoV-2 detection.

Droplet-based microreactor for the production of micro/nano-materials.

Droplet-based microreactors are of great interest to researchers due to their incredible ability in the synthesis of micro/nano-materials with multi-function and complex geometry. In recent years, a broad range of micro/nano-materials has been synthesized in droplet-based microreactors, which provide apparent advantages, such as better reproducibility, reliable automation, and accurate manipulation. In this review, we give a comprehensive and in-depth insight into droplet-based microreactors, covering fundamental research from droplet generation and manipulation to the applications of droplet-based microreactors in micro/nano-material generation. We also explore the outlook for droplet-based microreactors and challenges that lie ahead and give a possible effort direction. We hope this review will promote communications among researchers and entrepreneurs.

Valorisation of Fruits, their Juices and Residues into Valuable (Nano)materials for Applications in Chemical Catalysis and Environment.

One of the most abundant wastes from all around the world is nutrient resources. Among them, fruits, their extracts, and residues comprise a major portion, which contain many valuable components that get lost during disposal or become burden on the shrinking landfills. These concerns are addressed by seeking sustainable processing methods that would have a minimal environmental impact. The crops contain renewable chemicals which are useful for catalysis, wastewater treatment, or preparation of nanomaterials; there has been an upsurge for the industrial applications of (nano)materials as their environmental and catalytic appliances is a fascinating subject to design cheaper and safer catalytic systems. Due to the excellent chemical properties of the fruit extracts, they have garnered attention as cost-effective catalysts and support materials. This review focuses on the preparation of (nano)materials and their catalytic and environmental applications and highlights the potential appliances and industrial benefits derived from these low-cost renewable and sustainable greener sources thus essentially converting waste into wealth.

Improving dimensional stability of dental amalgam by using Nano Zinc Oxide.

OBJECTIVE: To investigate the dimensional stability of dental amalgam after the incorporation of zinc oxide nano powder. METHODS: The experimental study was conducted at the Hamdard University Dental Hospital and the Pakistan Council of Scientific and Industrial Research laboratories, Karachi, from January to June, 2018. Direct precipitation method was used in which analytical grade sodium hydroxide and zinc nitrate hex hydrate were used without any further purification. The sample was randomly divided into two groups. The control group A had 0 wt.% of nano zinc oxide, while the experimental group was further divided into 2 subgroups, with group B containing samples having 3 wt.% and group C 5 wt.% of nano zinc oxide. Delayed expansion was checked using electron micrometer. Data was analysed using SPSS 22. RESULTS: Of the 180 samples, there were 90(50%) in control group A, and 45(25%) each in experimental groups B and C. Subgroup B showed significantly more linear expansion than subgroup C. Subgroups B and C achieved their entire linear expansion after 24 hours. CONCLUSIONS: There was improvement in the dimensional stability of dental amalgam after the incorporation of nano particles of zinc oxide.

A review on peptide functionalized graphene derivatives as nanotools for biosensing.

Peptides exhibit unique binding behavior with graphene and its derivatives by forming bonds on its edges and planes. This makes them useful for sensing and imaging applications. This review with (155 refs.) summarizes the advances made in the last decade in the field of peptide-GO bioconjugation, and the use of these conjugates in analytical sciences and imaging. The introduction emphasizes the need for understanding the biotic-abiotic interactions in order to construct controllable peptide-functionalized graphitic material-based nanotools. The next section covers covalent and non-covalent interactions between peptide and oxidized graphene derivatives along with a discussion of the adsorption events during interfacing. We then describe applications of peptide-graphene conjugates in bioassays, with subsections on (a) detection of cancer cells, (b) monitoring protease activity, (c) determination of environmental pollutants and (d) determination of pathogenic microorganisms. The concluding section describes the current status of peptide functionalized graphitic bioconjugates and addresses future perspectives. Graphical abstractSchematic representation depicting biosensing applications of peptide functionalized graphene oxide.

Signal amplification in immunoassays by using noble metal nanoparticles: a review.

This review (with 147 references) summarizes the state of the art in methods for signal amplification in immunoassays by using noble metal nanoparticles (MeNPs). Following an introduction into the field, a first large section covers MeNPs as signal tracers. The next sections describes the use of MeNPs as carriers for biomolecules, and of doped, decorated or functionalized MeNPs. A next large section covers MeNPs as used in aggregation-based assays that result in a change of color or dynamic light scattering (DLS). This is followed by a discussion of MeNPs that undergo etching, size reduction, or growth and thereby change color and DLS, with subsections on methods based on etching, particle growth or particle formation. We then rview methods where MeNPs acts as catalysts (enzyme mimics), with subsections on MeNPs and on doped or composed MeNPs. A final large section discusses the synergies of MeNPs or multiple signal amplification strategies in immunoassays. Several Tables are presented that give an overview on the wealth of methods and materials. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical AbstractNoble metal nanoparticles have been widely used as essential components of signal amplification strategies to enhance the sensitivity of the immunoassays. This review summarizes various signal amplification strategies using metal NPs serving as (a) signal tracers, (b) carriers, (c) aggregators, (d) enzyme mimics, (e) in growth or etching of NPs, and (f) in synergistic effects.

Co3O4/Al-ZnO Nano-composites: Gas Sensing Properties.

In this paper, the gas sensing properties of metal oxide nano-powder composites are studied and modeled. The gas sensing properties of mixtures of two different metal oxide nanoparticles, prepared via low-cost routes, are investigated. The responses to both an oxidizing (NO2) and a reducing gas (CO) are analyzed. The tested composites are obtained by mixing a different percentage of a p-type metal oxide, Co3O4, with moderate responses to NO2 at about 200 °C and to CO at high temperature (above 260 °C), with n-type Al-doped ZnO, which is characterized by a large but unstable response towards NO2 around 160 °C and a moderate response towards CO around 200 °C. In the oxides mixtures, p-n heterojunctions are formed by the juxtaposition of an n-type and a p-type grain in contact. Consequently, the electronic conductivity is modified and the obtained composite materials show novel characteristics with respect to the base materials. This indicates that predicting the behavior of the composites from those of their components is not possible and it suggests that the hetero-junction behavior has to be studied to understand the sensing properties of the composite materials. The obtained results indicate that the composites containing a significant amount of hetero-junctions exhibit a stable response to NO2 at room temperature and significant responses towards CO at 160 °C.

Highly sensitive electronic whiskers based on patterned carbon nanotube and silver nanoparticle composite films.

Mammalian whiskers present an important class of tactile sensors that complement the functionalities of skin for detecting wind with high sensitivity and navigation around local obstacles. Here, we report electronic whiskers based on highly tunable composite films of carbon nanotubes and silver nanoparticles that are patterned on high-aspect-ratio elastic fibers. The nanotubes form a conductive network matrix with excellent bendability, and nanoparticle loading enhances the conductivity and endows the composite with high strain sensitivity. The resistivity of the composites is highly sensitive to strain with a pressure sensitivity of up to ∼8%/Pa for the whiskers, which is >10× higher than all previously reported capacitive or resistive pressure sensors. It is notable that the resistivity and sensitivity of the composite films can be readily modulated by a few orders of magnitude by changing the composition ratio of the components, thereby allowing for exploration of whisker sensors with excellent performance. Systems consisting of whisker arrays are fabricated, and as a proof of concept, real-time two- and three-dimensional gas-flow mapping is demonstrated. The ultrahigh sensitivity and ease of fabrication of the demonstrated whiskers may enable a wide range of applications in advanced robotics and human-machine interfacing.

Cytocompatible and multifunctional polymeric nanoparticles for transportation of bioactive molecules into and within cells.

Multifunctional polymeric nanoparticles are materials with great potential for a wide range of biomedical applications. For progression in this area of research, unfavorable interactions of these nanoparticles with proteins and cells must be avoided in biological environments, for example, through treatment of the nanoparticle surfaces. Construction of an artificial cell membrane structure based on polymers bearing the zwitterionic phosphorylcholine group can prevent biological reactions at the surface effectively. In addition, certain bioactive molecules can be immobilized on the surface of the polymer to generate enough affinity to capture target biomolecules. Furthermore, entrapment of inorganic nanoparticles inside polymeric matrices enhances the nanoparticle functionality significantly. This review summarizes the preparation and characterization of cytocompatible and multifunctional polymeric nanoparticles; it analyzes the efficiency of their fluorescence function, the nature of the artificial cell membrane structure, and their performance as in-cell devices; and finally, it evaluates both their chemical reactivity and effects in cells.

Aqueous stability and mobility of C60 complexed by sodium dodecyl benzene sulfonate surfactant.

Surfactant complexation may have significant effects on the environmental behavior of nano-particles. In order to understand the ecological exposure of nano-materials, it is important to determine the stability and mobility of surfactant-complexed nano-materials in aqueous systems. In this study, the aggregation and transport of C60 complexed by the surfactant sodium dodecyl benzene sulfonate (SDBS) were investigated. It was found that SDBS-complexed C60 had a ζ-potential of -49.5 mV under near-neutral pH conditions and remained stable during an aging period of 15 days. It had a critical coagulation concentration of 550 mmol/L for NaCl, which was higher than common natural colloids and many kinds of raw nano-materials, and was comparable to those of many kinds of surface-modified nano-materials. SDBS enhanced the stability of C60 colloid; however, at the same time, it also enhanced the colloidal particle aggregation rate. Much higher mobility was found for SDBS-complexed C60 than C60 colloid. Increase in ionic strength, Ca(2+) concentration or Al(3+) concentration decreased the mobility. In general, SDBS-complexed C60 had high stability and mobility.