RESUMEN
Sr2IrO4 has attracted considerable attention due to its structural and electronic similarities to La2CuO4, the parent compound of high-Tc superconducting cuprates. It was proposed as a strong spin-orbit-coupled Jeff = 1/2 Mott insulator, but the Mott nature of its insulating ground state has not been conclusively established. Here, we use ultrafast laser pulses to realize an insulator-metal transition in Sr2IrO4 and probe the resulting dynamics using time- and angle-resolved photoemission spectroscopy. We observe a gap closure and the formation of weakly renormalized electronic bands in the gap region. Comparing these observations to the expected temperature and doping evolution of Mott gaps and Hubbard bands provides clear evidence that the insulating state does not originate from Mott correlations. We instead propose a correlated band insulator picture, where antiferromagnetic correlations play a key role in the gap opening. More broadly, our results demonstrate that energy-momentum-resolved nonequilibrium dynamics can be used to clarify the nature of equilibrium states in correlated materials.
RESUMEN
The excitonic insulator is an electronically driven phase of matter that emerges upon the spontaneous formation and Bose condensation of excitons. Detecting this exotic order in candidate materials is a subject of paramount importance, as the size of the excitonic gap in the band structure establishes the potential of this collective state for superfluid energy transport. However, the identification of this phase in real solids is hindered by the coexistence of a structural order parameter with the same symmetry as the excitonic order. Only a few materials are currently believed to host a dominant excitonic phase, Ta2NiSe5 being the most promising. Here, we test this scenario by using an ultrashort laser pulse to quench the broken-symmetry phase of this transition metal chalcogenide. Tracking the dynamics of the material's electronic and crystal structure after light excitation reveals spectroscopic fingerprints that are compatible only with a primary order parameter of phononic nature. We rationalize our findings through state-of-the-art calculations, confirming that the structural order accounts for most of the gap opening. Our results suggest that the spontaneous symmetry breaking in Ta2NiSe5 is mostly of structural character, hampering the possibility to realize quasi-dissipationless energy transport.
RESUMEN
Stacking monolayer semiconductors creates moiré patterns, leading to correlated and topological electronic phenomena, but measurements of the electronic structure underpinning these phenomena are scarce. Here, we investigate the properties of the conduction band in moiré heterobilayers of WS2/WSe2 using submicrometer angle-resolved photoemission spectroscopy with electrostatic gating. We find that at all twist angles the conduction band edge is the K-point valley of the WS2, with a band gap of 1.58 ± 0.03 eV. From the resolved conduction band dispersion, we deduce an effective mass of 0.15 ± 0.02 me. Additionally, we observe replicas of the conduction band displaced by reciprocal lattice vectors of the moiré superlattice. We argue that the replicas result from the moiré potential modifying the conduction band states rather than final-state diffraction. Interestingly, the replicas display an intensity pattern with reduced 3-fold symmetry, which we show implicates the pseudo vector potential associated with in-plane strain in moiré band formation.
RESUMEN
The two-dimensional (2D) honeycomb lattice has attracted intensive research interest due to the appearance of Dirac-type band structures as the consequence of two sublattices in the honeycomb structure. Introducing strong spin-orbit coupling (SOC) leads to a gap opening at the Dirac point, transforming the honeycomb lattice into a 2D topological insulator as a platform for the quantum spin Hall effect (QSHE). In this work, we realize a 2D honeycomb-structured film with tellurium, the heaviest nonradioactive element in Group VI, namely, tellurene, via molecular beam epitaxy. We revealed the gap opening of 160 meV at the Dirac point due to the strong SOC in the honeycomb-structured tellurene by angle-resolved photoemission spectroscopy. The topological edge states of tellurene are detected via scanning tunneling microscopy/spectroscopy. These results demonstrate that tellurene is a novel 2D honeycomb lattice with strong SOC, and they unambiguously prove that tellurene is a promising candidate for a room-temperature QSHE system.
RESUMEN
Single-unit cell (1 UC) FeSe interfaced with TiOx or FeOx exhibits significantly enhanced superconductivity compared to that of bulk FeSe, with interfacial electron-phonon coupling (EPC) playing a crucial role. However, the reduced dimensionality in 1 UC FeSe, which may drive superconducting fluctuations, complicates our understanding of the enhancement mechanisms. We construct a new superconducting interface, 1 UC FeSe/SrVO3/SrTiO3. Here, the itinerant electrons of highly metallic SrVO3 films can screen all high-energy Fuchs-Kliewer phonons, including those of SrTiO3, making it the first FeSe/oxide system with screened interfacial EPC while maintaining the 1 UC FeSe thickness. Despite comparable doping levels, the heavily electron-doped 1 UC FeSe/SrVO3 exhibits a pairing temperature (Tg â¼ 48 K) lower than those of FeSe/SrTiO3 and FeSe/LaFeO3. Our findings disentangle the contributions of interfacial EPC from dimensionality in terms of enhancing Tg in FeSe/oxide interfaces, underscoring the critical importance of interfacial EPC. This FeSe/VOx interface also provides a platform for studying interfacial superconductivity.
RESUMEN
Closing the band gap of a semiconductor into a semimetallic state gives a powerful potential route to tune the electronic energy gains that drive collective phases like charge density waves (CDWs) and excitonic insulator states. We explore this approach for the controversial CDW material monolayer (ML) TiSe2 by engineering its narrow band gap to the semimetallic limit of ML-TiTe2. Using molecular beam epitaxy, we demonstrate the growth of ML-TiTe2xSe2(1-x) alloys across the entire compositional range and unveil how the (2 × 2) CDW instability evolves through the normal state semiconductor-semimetal transition via in situ angle-resolved photoemission spectroscopy. Through model electronic structure calculations, we identify how this tunes the relative strength of excitonic and Peierls-like coupling, demonstrating band gap engineering as a powerful method for controlling the microscopic mechanisms underpinning the formation of collective states in two-dimensional materials.
RESUMEN
We develop a novel metal contact approach using an antimony (Sb)-platinum (Pt) bilayer to mitigate Fermi-level pinning in 2D transition metal dichalcogenide channels. This strategy allows for control over the transport polarity in monolayer WSe2 devices. By adjustment of the Sb interfacial layer thickness from 10 to 30 nm, the effective work function of the contact/WSe2 interface can be tuned from 4.42 eV (p-type) to 4.19 eV (n-type), enabling selectable n-/p-FET operation in enhancement mode. The shift in effective work function is linked to Sb-Se bond formation and an emerging n-doping effect. This work demonstrates high-performance n- and p-FETs with a single WSe2 channel through Sb-Pt contact modulation. After oxide encapsulation, the maximum current density at |VD| = 1 V reaches 170 µA/µm for p-FET and 165 µA/µm for n-FET. This approach shows promise for cost-effective CMOS transistor applications using a single channel material and metal contact scheme.
RESUMEN
The soft X-ray photoelectron momentum microscopy (PMM) experimental station at the UVSOR Synchrotron Facility has been recently upgraded by additionally guiding vacuum ultraviolet (VUV) light in a normal-incidence configuration. PMM offers a very powerful tool for comprehensive electronic structure analyses in real and momentum spaces. In this work, a VUV beam with variable polarization in the normal-incidence geometry was obtained at the same sample position as the soft X-ray beam from BL6U by branching the VUV beamline BL7U. The valence electronic structure of the Au(111) surface was measured using horizontal and vertical linearly polarized (s-polarized) light excitations from BL7U in addition to horizontal linearly polarized (p-polarized) light excitations from BL6U. Such highly symmetric photoemission geometry with normal incidence offers direct access to atomic orbital information via photon polarization-dependent transition-matrix-element analysis.
RESUMEN
Ferromagnetic insulators (FMIs) are intriguing not only due to their rare nature, but also due to their potential applications in spintronics and various electronic devices. One of its key promising applications is based on an FMI-induced magnetic proximity effect, which can impose an effective time-reversal symmetry breaking on the target ultrathin layer to realize novel emergent phenomena. Here, we conduct systematic studies on thin film LaCoO3, an insulator known to be ferromagnet under tensile strain, with varying thicknesses, to establish it as an FMI platform to be integrated in heterostructures. The optimal thickness of the LaCoO3layer, providing a smooth surface and robust ferromagnetism with large remanence, is determined. A heterostructure consisting of an ultrathin target layer (2 uc SrRuO3), the LaCoO3FMI layer, and the La0.5Sr0.5CoO3conducting layer has been fabricated and the angle-resolved photoemission spectroscopy measurement on the multi-layer system demonstrates a sharp Fermi edge and a well-defined Fermi surface without the charging effect. This demonstrates the feasibility of the proposed heterostructure using LaCoO3thin film as the FMI layer, and further lays a groundwork to investigate the magnetic proximity induced phases in quantum materials.
RESUMEN
Diverse emergent correlated electron phenomena have been observed in twisted-graphene layers. Many electronic structure predictions have been reported exploring this new field, but with few momentum-resolved electronic structure measurements to test them. We use angle-resolved photoemission spectroscopy to study the twist-dependent (1° < θ < 8°) band structure of twisted-bilayer, monolayer-on-bilayer, and double-bilayer graphene (tDBG). Direct comparison is made between experiment and theory, using a hybrid k·p model for interlayer coupling. Quantitative agreement is found across twist angles, stacking geometries, and back-gate voltages, validating the models and revealing field-induced gaps in twisted graphenes. However, for tDBG at θ = 1.5 ± 0.2°, close to the magic angle θ = 1.3°, a flat band is found near the Fermi level with measured bandwidth Ew = 31 ± 5 meV. An analysis of the gap between the flat band and the next valence band shows deviations between experiment (Δh = 46 ± 5 meV) and theory (Δh = 5 meV), indicative of lattice relaxation in this regime.
RESUMEN
Systems with flat bands are ideal for studying strongly correlated electronic states and related phenomena. Among them, kagome-structured metals such as CoSn have been recognized as promising candidates due to the proximity between the flat bands and the Fermi level. A key next step will be to realize epitaxial kagome thin films with flat bands to enable tuning of the flat bands across the Fermi level via electrostatic gating or strain. Here, we report the band structures of epitaxial CoSn thin films grown directly on the insulating substrates. Flat bands are observed by using synchrotron-based angle-resolved photoemission spectroscopy (ARPES). The band structure is consistent with density functional theory (DFT) calculations, and the transport properties are quantitatively explained by the band structure and semiclassical transport theory. Our work paves the way to realize flat band-induced phenomena through fine-tuning of flat bands in kagome materials.
RESUMEN
The fabrication of artificial structures using a twisted van der Waals assembly has been a key technique for recent advancements in the research of two-dimensional (2D) materials. To date, various exotic phenomena have been observed thanks to the modified electron correlation or moiré structure controlled by the twist angle. However, the twisted van der Waals assembly has further potential to modulate the physical properties by controlling the symmetry. In this study, we fabricated twisted bilayer WTe2 and demonstrated that the twist angle successfully controls the spatial inversion symmetry and hence the spin splitting in the band structure. Our results reveal the further potential of a twisted van der Waals assembly, suggesting the feasibility of pursuing new physical phenomena in 2D materials based on the control of symmetry.
RESUMEN
Surface functionalization with dipolar molecules is known to tune the electronic band alignment in semiconductor films and colloidal quantum dots. Yet, the influence of surface modification on plasmonic nanocrystals and their properties remains little explored. Here, we functionalize tin-doped indium oxide nanocrystals (ITO NCs) via ligand exchange with a series of cinnamic acids with different electron-withdrawing and -donating dipolar characters. Consistent with previous reports on semiconductors, we find that withdrawing (donating) ligands increase (decrease) the work function caused by an electrostatic potential shift across the molecular layer. Quantitative analyses of the plasmonic extinction spectra reveal that varying the ligand molecular dipole affects the near-surface depletion layer, with an anticorrelated trend between the electron concentration and electronic volume fraction, factors that are positively correlated in as-synthesized NCs. Electronic structure engineering through surface modification provides access to distinctive combinations of plasmonic properties that could enable optoelectronic applications, sensing, and hot electron-driven processes.
RESUMEN
As the electron mobility of two-dimensional (2D) materials is dependent on an insulating substrate, the nonuniform surface charge and morphology of silicon dioxide (SiO2) layers degrade the electron mobility of 2D materials. Here, we demonstrate that an atomically thin single-crystal insulating layer of silicon oxynitride (SiON) can be grown epitaxially on a SiC wafer at a wafer scale and find that the electron mobility of graphene field-effect transistors on the SiON layer is 1.5 times higher than that of graphene field-effect transistors on typical SiO2 films. Microscale and nanoscale void defects caused by heterostructure growth were eliminated for the wafer-scale growth of the single-crystal SiON layer. The single-crystal SiON layer can be grown on a SiC wafer with a single thermal process. This simple fabrication process, compatible with commercial semiconductor fabrication processes, makes the layer an excellent replacement for the SiO2/Si wafer.
RESUMEN
We investigate the electronic properties of a graphene and α-ruthenium trichloride (α-RuCl3) heterostructure using a combination of experimental techniques. α-RuCl3 is a Mott insulator and a Kitaev material. Its combination with graphene has gained increasing attention due to its potential applicability in novel optoelectronic devices. By using a combination of spatially resolved photoemission spectroscopy and low-energy electron microscopy, we are able to provide a direct visualization of the massive charge transfer from graphene to α-RuCl3, which can modify the electronic properties of both materials, leading to novel electronic phenomena at their interface. A measurement of the spatially resolved work function allows for a direct estimate of the interface dipole between graphene and α-RuCl3. Their strong coupling could lead to new ways of manipulating electronic properties of a two-dimensional heterojunction. Understanding the electronic properties of this structure is pivotal for designing next generation low-power optoelectronics devices.
RESUMEN
Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe1+yTe3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe1+yTe3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe1.14Te3 reveal saturation magnetic fields ranging between 27 and 30 T with saturation magnetic moments of 2.05-2.12 µB. Magnetotransport measurements confirm that TaFe1.14Te3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. We demonstrate the ability to isolate few-layer sheets of TaFe1.14Te3, establishing TaFe1.14Te3 as a potential platform for two-dimensional spintronics.
RESUMEN
Copper-based high-temperature superconductors share a common feature in their crystal structure, which is the presence of a CuO2 plane, where superconductivity takes place. Therefore, important questions arise as to whether superconductivity can exist in a single layer of the CuO2 plane and, if so, how such superconductivity in a single CuO2 plane differs from that in a bulk cuprate system. To answer these questions, studies of the superconductivity in cuprate monolayers are necessary. In this study, we constructed a heterostructure system with a La2-xSrxCuO4 (LSCO) monolayer containing a single CuO2 plane and measured the resulting electronic structures. Monolayer LSCO has metallic and bulk-like electronic structures. The hole doping ratio of the monolayer LSCO is found to depend on the underlying buffer layer due to the interface effect. Our work will provide a platform for research into ideal two-dimensional cuprate systems.
RESUMEN
The integration of metallic contacts with two-dimensional (2D) semiconductors is routinely required for the fabrication of nanoscale devices. However, nanometer-scale variations in the 2D/metal interface can drastically alter the local optoelectronic properties. Here, we map local excitonic changes of the 2D semiconductor MoS2 in contact with Au. We utilize a suspended and epitaxially grown 2D/metal platform that allows correlated electron energy-loss spectroscopy (EELS) and angle resolved photoelectron spectroscopy (nanoARPES) mapping. Spatial localization of MoS2 excitons uncovers an additional EELS peak related to the MoS2/Au interface. NanoARPES measurements indicate that Au-S hybridization decreases substantially with distance from the 2D/metal interface, suggesting that the observed EELS peak arises due to dielectric screening of the excitonic Coulomb interaction. Our results suggest that increasing the van der Waals distance could optimize excitonic spectra of mixed-dimensional 2D/3D interfaces and highlight opportunities for Coulomb engineering of exciton energies by the local dielectric environment or moiré engineering.
RESUMEN
Heterostructures composed of the intrinsic magnetic topological insulator MnBi2Te4 and its nonmagnetic counterpart Bi2Te3 host distinct surface electronic band structures depending on the stacking order and exposed termination. Here, we probe the ultrafast dynamical response of MnBi2Te4 and MnBi4Te7 following near-infrared optical excitation using time- and angle-resolved photoemission spectroscopy and disentangle surface from bulk dynamics based on density functional theory slab calculations of the surface-projected electronic structure. We gain access to the out-of-equilibrium charge carrier populations of both MnBi2Te4 and Bi2Te3 surface terminations of MnBi4Te7, revealing an instantaneous occupation of states associated with the Bi2Te3 surface layer followed by carrier extraction into the adjacent MnBi2Te4 layers with a laser fluence-tunable delay of up to 350 fs. The ensuing thermal relaxation processes are driven by phonon scattering with significantly slower relaxation times in the magnetic MnBi2Te4 septuple layers. The observed competition between interlayer charge transfer and intralayer phonon scattering demonstrates a method to control ultrafast charge transfer processes in MnBi2Te4-based van der Waals compounds.
RESUMEN
Magnetic topological insulators constitute a novel class of materials whose topological surface states (TSSs) coexist with long-range ferromagnetic order, eventually breaking time-reversal symmetry. The subsequent bandgap opening is predicted to co-occur with a distortion of the TSS warped shape from hexagonal to trigonal. We demonstrate such a transition by means of angle-resolved photoemission spectroscopy on the magnetically rare-earth (Er and Dy) surface-doped topological insulator Bi2Se2Te. Signatures of the gap opening are also observed. Moreover, increasing the dopant coverage results in a tunable p-type doping of the TSS, thereby allowing for a gradual tuning of the Fermi level toward the magnetically induced bandgap. A theoretical model where a magnetic Zeeman out-of-plane term is introduced in the Hamiltonian governing the TSS rationalizes these experimental results. Our findings offer new strategies to control magnetic interactions with TSSs and open up viable routes for the realization of the quantum anomalous Hall effect.