RESUMEN
Regarded as a superior urban stormwater management solution, rain gardens can effectively store rainfall runoff and purify water quality. However, the efficiency of traditional rain gardens (TRG) in regulating runoff and removing nitrogen and phosphorus varies under different hydrological conditions. In this study, the TRG was retrofitted to construct a two-stage tandem rain garden (TTRG). Based on the experimental monitoring of rain gardens under natural rainfall from 2011 to 2013, results indicated a significantly higher runoff reduction capacity for the TTRG compared to the traditional garden (p<0.05), with average runoff and peak flow reduction rates increasing by 42.8% and 36.2%, respectively. Rainfall characteristics significantly impacted the runoff reduction of the TRG (p<0.05), but not the TTRG (p>0.05), demonstrating the enhanced control and stability of the TTRG in managing rainfall runoff. The concentration removal efficiency of nitrate nitrogen (NO3--N) was significantly improved (p<0.05), whereas the total phosphorus (TP), ammonium nitrogen (NH3-N) and total nitrogen (TN) were not significantly changed (p>0.05). The first-order kinetic model was used to fit the removal effect of different pollutants before and after retrofitting the rain garden, and the removal of NO3--N by the TTRG was better than that of the TRG. The TTRG showed significantly higher load removal efficiencies for TP, NO3--N, and NH3-N compared to TRG (p<0.05), with average load removal rates increasing by 49.92%, 75.02%, and 14.81%, respectively. The TTRG can regulate urban rainfall runoff more efficiently and stably. By changing the water flow path in the rain garden, the TTRG has a better runoff reduction ability and pollutant purification effect.
RESUMEN
The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, â¢OH, SO4â¢-, O2â¢-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.
Asunto(s)
Carbón Orgánico , Restauración y Remediación Ambiental , Peróxidos , Carbón Orgánico/química , Peróxidos/química , Restauración y Remediación Ambiental/métodos , Catálisis , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Metales/químicaRESUMEN
Water pollution remains a pressing environmental issue, with diverse pollutants such as heavy metals, pharmaceuticals, dyes, and aromatic hydrocarbon compounds posing a significant threat to clean water access. Historically, biomass-derived activated carbons (ACs) have served as effective adsorbents for water treatment, owing to their inherent porosity and expansive surface area. Nanocomposites have emerged as a means to enhance the absorption properties of ACs, surpassing conventional AC performance. Biomass-based activated carbon nanocomposites (ACNCs) hold promise due to their high surface area and cost-effectiveness. This review explores recent advancements in biomass-based ACNCs, emphasizing their remarkable adsorption efficiencies and paving the way for future research in developing efficient and affordable ACNCs. Leveraging real-time communication for ACNC applications presents a viable approach to addressing cost concerns.
Asunto(s)
Carbón Orgánico , Frutas , Nanocompuestos , Verduras , Purificación del Agua , Nanocompuestos/química , Carbón Orgánico/química , Purificación del Agua/métodos , Frutas/química , Adsorción , Verduras/química , Contaminantes Químicos del Agua/química , BiomasaRESUMEN
Signal transduction is an important mode of algae-bacteria interaction, in which bacterial quorum sensing (QS) may affect microalgal growth and metabolism. Currently, little is known whether acyl homoserine lactones (AHLs) released by bacteria can affect the pollutant removal by algae-bacteria consortia (ABC). In this study, we constructed ABC using Chlorella vulgaris (Cv) with two AHLs-producing bacteria and investigated their performance in the removal of multiple pollutants, including chemical oxygen demand (COD), total nitrogen (TN), phosphorus (P), and cadmium (Cd). The AHLs-producing bacteria, namely Agrobacterium sp. (Ap) and Ensifer adherens (Ea), were capable of forming a symbiosis with C. vulgaris. Consortia of Cv and Ap with ratio of 2:1 (Cv2-Ap1) showed the optimal growth promotion and higher removal of Cd, COD, TN, and P compared to the C. vulgaris monoculture. Cv2-Ap1 ABC removed 36.1-47.5% of Cd, 94.5%-94.6% COD, 37.1%-56.0% TN, and 90.4%-93.5% P from the culture medium. In addition, increase of intracellular neutral lipids and extracellular protein, as well as the types of functional groups on cell surface contributed to Cd removal and tolerance in the Cv2-Ap1 ABC. Six AHLs were detected in the Cv2-Ap1 culture. Among these, 3OC8-HSL and 3OC12-HSL additions promoted the ABC growth and enhanced their Cd accumulation. These findings may contribute to further understanding of AHL-mediated communication between algae and bacteria and provide support bioremediation efforts of metal-containing wastewater.
Asunto(s)
Acil-Butirolactonas , Cadmio , Cadmio/metabolismo , Acil-Butirolactonas/metabolismo , Chlorella vulgaris/metabolismo , Chlorella vulgaris/crecimiento & desarrollo , Bacterias/metabolismo , Biodegradación Ambiental , Percepción de Quorum , Fósforo/metabolismo , Nitrógeno/metabolismoRESUMEN
Environmental electrochemistry and water resource recovery are covered in this review. The study discusses the growing field's scientific basis, methods, and applications, focusing on innovative remediation tactics. Environmental electrochemistry may solve water pollution and extract resources. Electrochemical methods may effectively destroy or convert pollutants. This method targets heavy metals, organic compounds, and emerging water contaminants such as pharmaceuticals and microplastics, making it versatile. Environmental electrochemistry and resource recovery synergize to boost efficiency and sustainability. Innovative electrochemical methods can extract or synthesise metals, nutrients, and energy from wastewater streams, decreasing treatment costs and environmental effect. The study discusses electrocoagulation, electrooxidation, and electrochemical advanced oxidation processes and their mechanics and performance. Additionally, it discusses current electrode materials, reactor designs, and process optimisation tactics to improve efficiency and scalability. Resource recovery in electrochemical remediation methods is also examined for economic and environmental feasibility. Through critical examination of case studies and techno-economic evaluations, it explains the pros and cons of scaling up these integrated techniques. This study covers environmental electrochemistry and resource recovery's fundamental foundations, technology advances, and sustainable water management consequences.
Asunto(s)
Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/química , Aguas Residuales/química , Técnicas Electroquímicas , Metales Pesados/químicaRESUMEN
Efficient boron removal from irrigation waters is crucial for sustainable agriculture, as elevated levels of boron can be toxic to many plants, limiting growth and crop productivity. In this context, the present study investigated the sorption equilibrium of boron using zeolites in two types of aqueous matrices: a synthetic solution containing only boron and natural irrigation waters. Through the application of various isothermal sorption models (Langmuir, Freundlich, Sips, Toth, Jovanovic, Temkin, Dubinin-Radushkevich, and Redlich-Peterson), the efficacy of zeolite for boron removal under controlled and real conditions was evaluated. The results indicated a notable difference in sorption behavior between the two matrices, reflecting the complexity and heterogeneity of interactions in the boron-zeolite system. In the synthetic solution, the Freundlich model provided the best fit (R2 = 0.9917), suggesting heterogeneous and multilayer sorption, while the Sips model showed high efficacy in describing the sorption in both matrices, evidencing its capability to capture the complex nature of the interaction between boron and zeolite under different environmental conditions. However, in natural irrigation waters, the Jovanovic model demonstrated the most accurate fit (R2 = 0.999), highlighting the importance of physical interactions in boron sorption. These findings underscore the significant influence of the water matrix on the efficacy of zeolite as a boron removal agent, emphasizing the need to consider the specific composition of irrigation water in the design of removal treatments. Additionally, the results stress the importance of selecting the appropriate isothermal model to predict boron sorption behavior, which is crucial for developing effective and sustainable treatment strategies. This study provides a basis for optimizing boron removal in various agricultural and industrial applications, contributing to the design of more efficient and specific water treatment processes.
RESUMEN
Artificial intelligence (AI) is increasingly being applied to wastewater treatment to enhance efficiency, improve processes, and optimize resource utilization. This review focuses on objectives, advantages, outputs, and major findings of various AI models in the three key aspects: the prediction of removal efficiency for both organic and inorganic pollutants, real-time monitoring of essential water quality parameters (such as pH, COD, BOD, turbidity, TDS, and conductivity), and fault detection in the processes and equipment integral to wastewater treatment. The prediction accuracy (R2 value) of AI technologies for pollutant removal has been reported to vary between 0.64 and 1.00. A critical aspect explored in this review is the cost-effectiveness of implementing AI systems in wastewater treatment. Numerous countries and municipalities are actively engaging in pilot projects and demonstrations to assess the feasibility and effectiveness of AI applications in wastewater treatment. Notably, the review highlights successful outcomes from these initiatives across diverse geographical contexts, showcasing the adaptability and positive impact of AI in revolutionizing wastewater treatment on a global scale. Further, insights on the ethical considerations and potential future directions for the use of AI in wastewater treatment plants have also been provided.
Asunto(s)
Inteligencia Artificial , Aguas Residuales , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodosRESUMEN
The bioretention system is one of the most widely used low impact development (LID) facilities with efficient purification capacity for stormwater, and its planting design has been a hot spot for research at home and abroad. In this paper, ryegrass (Lolium perenne L.), bermuda (Cynodon dactylon Linn.), bahiagrass (Paspalum notatum Flugge), and green grass (Cynodon dactylon × C .transadlensis 'Tifdwarf') were chosen as plant species to construct a shallow bioretention system. The growth traits and nutrient absorption ability of four gramineous plants were analyzed. Their tolerance, enrichment, and transportation capacity were also evaluated to compare plant species and their absorptive capacity of heavy metals (Cu, Pb, and Zn). Results showed that the maximum absorption rate (Imax) ranged from 22.1 to 42.4 µg/(g·h) for P and ranged from 65.4 to 104.8 µg/(g·h) for NH4+-N; ryegrass had the strongest absorption capacity for heavy metals and the maximum removal rates of Cu, Pb, and Zn by four grasses were 78.4, 59.4, and 51.3%, respectively; the bioretention cell with ryegrass (3#) was significantly more effective in purifying than the unplanted bioretention cell (1#) during the simulated rainfall test. Overall, the system parameters were optimized to improve the technical application of gramineous plants in the bioretention system.
Asunto(s)
Lluvia , Contaminantes Químicos del Agua , Metales Pesados , Biodegradación Ambiental , Poaceae , Lolium/metabolismo , Purificación del Agua/métodosRESUMEN
This study examines the influence of planting mixture variations on the quality of the percolated water of the rain garden with and without plants. Six planting mixtures in experimental rain gardens have been used. It has been noted that pollutant removal efficiency of RG can exhibit variations based on specific parameters. Notably, RG6, utilizing a planting mix of 75% topsoil and 25% compost, demonstrated the highest performance. These results draw attention to the critical role of the specific planting mixtures in influencing the performance of vital parameters related to pollutant removal. The observation shows that RG5 exhibits exceptional removal efficiency in pH, Total Suspended Solids (TSS), Biological Oxygen Demand (BOD), and Chemical Oxygen Demand (COD), and RG6 performs best in electrical conductivity (EC), Total Dissolved Solids (TDS), Total Nitrogen (TN), and Total Phosphorus (TP) removal. In particular, when analyzing pollutant removal on a surface with Madagascar periwinkle plants, RG6 emerges as the most effective, achieving an impressive efficiency of approximately 49%. For the bare surface, pollutant removal efficiency is 40%. The study outcome will be useful in deciding the composition of the planting mixture, which will keep the rain garden to improve quality and quantitatively hydrological performance, lowering urban flooding magnitude.
Asunto(s)
Lluvia , Fósforo , Contaminantes Químicos del Agua , Nitrógeno , Análisis de la Demanda Biológica de Oxígeno , Suelo/químicaRESUMEN
Naturally occurring hematite has been widely studied in the Fenton-like system for water pollutant remediation due to its abundance and non-toxicity. However, its inadequate catalytic activity results in difficulty in effectively degrading pollutants in the catalytic degradation system that it constitutes. Thus, we constructed a photochemical system composed of hematite with {001} facet of high activity facet and low-cost and non-toxic oxalic acid (OA) for the removal of various types of pollutants. The removal rate for the degradation of metronidazole, tetracycline hydrochloride, Rhodamine B, and hexavalent chromium by hematite nanoplate with the exposed {001} facet activating OA under visible light irradiation was 4.75, 2.25, 2.33, and 2.74 times than that by the exposed {110} facet, respectively. Density functional theory (DFT) calculation proved that the OA molecule was more easily adsorbed on the {001} facet of hematite than that on the {110} facet, which would favor the formation of the more Fe(III)-OA complex and reactive species. In addition, the reactive site of metronidazole for the attraction of radicals was identified on the basis of the DFT calculation on the molecular occupied orbitals, and the possible degradation pathway for metronidazole included carbon chain fracture, hydroxyethyl-cleavage, denitrogenation, and hydroxylation. Thus, this finding may offer a valuable direction in designing an efficient iron-based catalyst based on facet engineering for the improved activity of Fenton-like systems such as OA activation.
Asunto(s)
Contaminantes Ambientales , Nanopartículas , Compuestos Férricos/química , Ácido Oxálico , Metronidazol , Luz , Peróxido de Hidrógeno/química , CatálisisRESUMEN
This paper presents the expansion of an optical, chemical sensor that can rapidly and reliably detect, quantify, and remove Ni(II) ions in oil products and electroplating wastewater sources. The sensor is based on mesoporous silica nanospheres (MSNs) that have an extraordinary surface area, uniform surface morphology, and capacious porosity, making them an excellent substrate for the anchoring of the chromoionophoic probe,3'-{(1E,1' E)-[(4-chloro-1,2 phenylene)bis (azaneylylidene)]-bis(methaneylylidene)}bis(2-hydroxybenzoic acid) (CPAMHP). The CPAMHP probe is highly selective and sensitive to Ni(II), enabling it to be used in naked-eye colorimetric recognition of Ni(II) ions. The MSNs provide several accessible exhibited sites for uniform anchoring of CPAMHP probe molecules, making it a viable chemical sensor even with the use of naked-eye sensing. The surface characters and structural analysis of the MSNs and CPAMHP sensor samples were examined using various techniques. The CPAMHP probe-anchored MSNs exhibit a clear and vivid color shift from pale yellow to green upon exposure to various concentrations of Ni(II) ions, with a reaction time down to approximately 1 minute. Furthermore, the MSNs can serve as a base to retrieve extremely trace amounts of Ni(II) ions, making the CPAMHP sensor a dual-functional device. The calculated limit of recognition for Ni(II) ions using the fabricated CPAMHP sensor samples is 0.318 ppb (5.43 × 10-9 M). The results suggest that the proposed sensor is a promising tool for the sensitive and reliable detection of Ni(II) ions in petroleum products and for removing Ni(II) ions in electroplating wastewater; the data indicate an excellent removal of Ni (II) up to 96.8%, highlighting the high accuracy and precision of our CPAMHP sensor.
Asunto(s)
Nanosferas , Petróleo , Dióxido de Silicio/química , Galvanoplastia , Aguas Residuales , Nanosferas/química , Iones/química , Petróleo/análisisRESUMEN
Catalytic hydrogen peroxide (H2 O2 ) generation from oxygen and water enables a sustainable environment to operate in an effective and green energy-to-chemical conversion way, which has attracted increasing interest in the fields of energy production and environment treatment. In light of this, tremendous progresses and developments have been made during the past decades in catalytic H2 O2 production for pollutant removal from three perspectives including photocatalysis, electrocatalysis or chemical activation. Herein, we critically review the state-of-the-art developments over various procedures of H2 O2 generation and its further application, with the existence of photocatalysts, electrocatalysts, and catalysts, respectively. Benefiting from extensively experimental and theoretical investigations, the performance and stability of H2 O2 generation and its utilization can be maneuvered by devising catalytic platform based on numerous catalysts with predominant electronic, chemical and physical properties, which endow the catalysts with efficient electrons transportation, abundant active sites, and sufficient oxygen adsorption for H2 O2 generation. Furthermore, this review also discusses the formation mechanism of H2 O2 by 2e-ORR and 2e-WOR, as well as its functional process of activating and removing pollutants, and summarizes the design principles of various catalysts by focusing on the formation of H2 O2 . We finally highlight the specific challenges and prospects related to the utilization of catalysts and envision the possible future development trends in the fields of pollutant removal.
RESUMEN
Septic tanks in low- and middle-income countries are often not emptied for a long time, potentially resulting in poor pollutant removal efficiency and increased greenhouse gas emissions, including methane (CH4). We examined the impact of long emptying intervals (4.0-23 years) on the biochemical oxygen demand (BOD) removal efficiency of 15 blackwater septic tanks and the CH4 emission rates of 23 blackwater septic tanks in Hanoi. The average BOD removal efficiency was 37% (-2-65%), and the average CH4 emission rate was 10.9 (2.2-26.8) g/(cap·d). The emptying intervals were strongly negatively correlated with BOD removal efficiency (R = -0.676, p = 0.006) and positively correlated with CH4 emission rates (R = 0.614, p = 0.001). CH4 emission rates were positively correlated with sludge depth (R = 0.596, p = 0.002), but against expectation, negatively correlated with BOD removal efficiency (R = -0.219, p = 0.451). These results suggest that shortening the emptying interval improves the BOD removal efficiency and reduces the CH4 emission rate. Moreover, the CH4 emission estimation of the Intergovernmental Panel on Climate Change, which is a positive conversion of BOD removal, might be inaccurate for septic tanks with long emptying intervals. Our findings suggest that emptying intervals, sludge depth, and per-capita emission factors reflecting long emptying intervals are potential parameters for accurately estimating CH4 emissions from septic tanks.
Asunto(s)
Gases de Efecto Invernadero , Metano , Metano/análisis , Aguas del Alcantarillado , Cambio ClimáticoRESUMEN
The growing global concern about environmental threats due to environmental pollution requires the development of environmentally friendly and efficient removal/detection materials and methods. Porphyrin/phthalocyanine (Por/Pc) based porous organic polymers (POPs) as a newly emerging porous material are prepared through polymerizing building blocks with different structures. Benefiting from the high porosity, adjustable pore structure, and enzyme-like activities, the Por/Pc-POPs can be the ideal platform to study the removal and detection of pollutants. However, a systematic summary of their application in environmental treatment is still lacking to date. In this review, the development of various Por/Pc-POPs for pollutant removal and detection applications over the past decade was systematically addressed for the first time to offer valuable guidance on environmental remediation through the utilization of Por/Pc-POPs. This review is divided into two sections (pollutants removal and detection) focusing on Por/Pc-POPs for organic, inorganic, and gaseous pollutants adsorption, photodegradation, and chemosensing, respectively. The related removal and sensing mechanisms are also discussed, and the methods to improve removal and detection efficiency and selectivity are also summarized. For the future practical application of Por/Pc-POPs, this review provides the emerging research directions and their application possibility and challenges in the removal and detection of pollutants.
Asunto(s)
Contaminantes Ambientales , Porfirinas , Contaminantes Ambientales/química , Porosidad , Polímeros/químicaRESUMEN
The depth of the substrate of subsurface flow (SSF) constructed wetlands (CWs) is closely related to their cost and operation stability. To explore the physiological regulation mechanism of wetland plants and pollutant removal potential of SSF CWs under "vertical spatial stress of roots" (by greatly reducing the depth of the substrate in SSF CWs to limit the vertical growth space of roots, VSSR), the physiological response and wetland purification effect of a 0.1 m Canna indica L. CW under VSSR were studied compared with conventional SSF CWs (0.6 m, 1.2 m). The results demonstrated that VSSR significantly enhanced the dissolved oxygen (DO) concentration (p < 0.05) within the SSF CWs, with the DO in 0.1 m CW remaining stable at over 3 mg/L. Under the same hydraulic retention time (HRT), VSSR significantly improved the removal effect of pollutants (p < 0.05). The removal rates of COD, NH4+-N, and total phosphorus (TP) remained above 87%, and the mean removal rates of total nitrogen (TN) reached 91.71%. VSSR promoted the morphological adaptation mechanisms of plants, such as significantly increased root-shoot ratio (p < 0.05), changed biomass allocation. Plants could maintain the stability of the photosynthetic mechanism by changing the distribution of light energy. The results of microbial community function prediction demonstrated that aerobic denitrification was the main mechanism of N transformation in the 0.1 m CW under VSSR. VSSR could induce the high root activity of plants, augment the concentration of root exudates, enhance the redox environment of the plant rhizosphere, further foster the enrichment of aerobic denitrifying bacteria, and strengthen the absorption efficiency of wetland plants and substrate, thus achieving an efficient pollutant removal capacity. Studies showed that VSSR was an effective means to enhance the rhizosphere effect of plants and pollutant removal in SSF CWs.
Asunto(s)
Contaminantes Ambientales , Eliminación de Residuos Líquidos , Eliminación de Residuos Líquidos/métodos , Humedales , Rizosfera , Plantas , Nitrógeno/análisisRESUMEN
Modern society has increasingly a diffusion of pollutants and emerging contaminants (e.g., different types of chemicals and endocrine disruptors in pharmaceuticals, pesticides, household cleaning, and personal care products, etc.) that have detrimental effects on the environment (atmosphere, hydrosphere, biosphere and anthroposphere) and also generate diseases and disorders on the people health. Environmental science requires efforts in the detection and elimination of manifold pollutants and emerging pollutants with appropriate product and process technologies. This study aims to analyze different paths of treatment technologies to investigate their evolution and predict new directions of promising technological trajectories to support the removal of contaminants directed to reach, whenever possible, sustainable development objectives. The work is mainly devoted to wastewater treatment technologies. A proposed model analyzes the evolution of patents (proxy of innovation and new technology) on publications (proxy of science and knowledge advances) to quantify the relative growth rate of new trajectories of technologies to remove pollutants and emerging contaminants. Results reveal that new directions of treatment technologies having an accelerated rate of growth are (in decreasing order): biochar and reverse osmosis in physical-based technologies, coagulation, and disinfection water treatments in chemical-based technologies and anaerobic processes in biological-based technologies. Other main technologies, such as carbon nanotubes and advanced oxidation processes, seem to be in the initial phase of development and need learning by using processes and further science and technology advances to be implemented as effective treatments and cost-effective methods. The results here show similar trends to global market revenue in water and wastewater treatment technologies. These findings bring us to the main information to extend the knowledge about new directions of technologies for the treatment and/or elimination of pollutants and microorganisms in order to support decisions of policymakers towards goals of sustainable development by reducing environmental degradation and people health disorders.
Asunto(s)
Contaminantes Ambientales , Nanotubos de Carbono , Contaminantes Químicos del Agua , Purificación del Agua , Humanos , Aguas Residuales , Contaminantes Ambientales/química , Contaminantes Químicos del Agua/análisis , Tecnología , Purificación del Agua/métodosRESUMEN
The quest for water-splitting photocatalysts to generate hydrogen as a clean energy source from two-dimensional (2D) materials has enormous implications for sustainable energy solutions. Photocatalytic water splitting, a major field of interest, is focused on the efficient production of hydrogen from renewable resources such as water using 2D materials. Tin sulfide and tin disulfide, collectively known as SnS and SnS2, respectively, are metal sulfide compounds that have gained attention for their photocatalytic properties. Their unique electronic structures and morphological characteristics make them promising candidates for harnessing solar energy for environmental and energy-related purposes. CdS/SnS/SnS2 photocatalysts with two Sn phases (II and IV) were synthesized using a solvothermal method in this study. CdS was successfully placed on a broad SnS/SnS2 plane after a series of characterizations. We found that it is composited in the same way as a core-shell shape. When the SnS/SnS2 phase ratio was dominated by SnS and the structure was composited with CdS, the degradation efficiency was optimal. This material demonstrated high photocatalytic hydrogenation efficiency as well as efficient photocatalytic removal of Cr(VI) over 120 min. Because of the broad light absorption of CdS, the specific surface area, which is the reaction site, became very large. Second, it served as a transport medium for electron transfer from the conduction band (CB) of the SnS to the CB of the SnS2. Because of the composite, these electrons flowed into the CB of CdS, improving the separation efficiency of the photogenerated carriers even further. This material, which was easily composited, also effectively prevented mineral corrosion, which is a major issue with CdS.
Asunto(s)
Hidrógeno , Energía Solar , Hidrogenación , Sitios de Unión , CorrosiónRESUMEN
Landfill leachate treatment employing normal and electrode-integrated constructed wetlands is difficult due to the presence of significant amounts of organic compounds, which frequently impede the progression of microbial-based aerobic pollutant removal pathways. As a result, this study examines the effect of supplementary air availability via intermittent and continuous aeration strategies in improving organic, nutrient, and coliform removals of the unplanted, planted (normal and electrode-integrated) two-stage tidal flow constructed wetlands designed to treat landfill leachate. The constructed wetlands were filled with coal and biochar media and planted with Canna indica. Mean chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP), and coliform removal percentages of the externally aerated two-stage unplanted, only planted, planted-microbial fuel cell integrated constructed wetland systems ranged between 96 and 99%, 82 and 93%, 91 and 98%, 86 and 96%, respectively, throughout the experimental campaign. External aeration inhibited the development of a dominant anaerobic environment within the media of the wetland systems and improved overall pollutant removal. The electrode-integrated planted tidal flow wetlands produced better effluent quality than the unplanted or only planted tidal flow systems without electrode assistance. The first stages of the three wetland systems achieved an additional 5-7% COD, 7-12% TN, and 15-22% coliform removal during the continuous aeration period compared to the corresponding performance of the intermittent aeration phase. The pollutant removal performance of the second-stage wetlands decreased during the continuous aeration phase. The media composition supported electrochemically active and inactive microbial-based pollutant removal routes and the chemical adsorption of pollutants. Nitrogen and phosphorus accumulation percentage in plant tissues was low, i.e., 0.4-2.2% and 0.04-0.8%, respectively. During the continuous aeration period, the electrode-integrated tidal flow constructed wetlands achieved higher power density production, i.e., between 859 and 1432 mW (mW)/meter3(m3). This study demonstrates that external aeration might improve pollutant removal performance of the normal, electrodes integrated tidal flow-based constructed wetlands when employed for high organic-strength wastewater treatment such as landfill leachate.
Asunto(s)
Contaminantes Químicos del Agua , Humedales , Compuestos Orgánicos , Nitrógeno/análisis , Plantas , Análisis de la Demanda Biológica de Oxígeno , Electrodos , Fósforo/análisis , Eliminación de Residuos LíquidosRESUMEN
Process Intensification (PI) is the modification or integration of conventional or novel processes within a single unit operation in order to improve product quality and reduce waste. PI offers numerous advantages, including a reduction in the initial and operational costs, an improvement in product quality/quantity, the generation of less waste, and an increase in process safety. The synergistic effect of PI in comparison to the conventional procedure ensures maximizing resource efficiency. PI can be accomplished in two ways: either by integrating various processes or by modifying the design of equipment to improve operational efficiency. In this regard, the present review provides a comprehensive insight into the application of PI in wastewater and sludge treatment methods and discusses the operational advantages. This review provides a comprehensive list of different PI approaches applied in wastewater and sludge treatment to remove pollutants and the various equipment, techniques and reactors used in PI. The second section addresses the challenges of PI in wastewater treatment that removes dyes, pesticides, organic and inorganic pollutants, micro- and nano-plastics, persistent organic pollutants, pharmaceutical and personal care pollutants.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Aguas Residuales , Aguas del Alcantarillado , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/análisisRESUMEN
The performance of a mixotrophic photoelectroactive biofilm reactor (MPBR) was improved in order to achieve enhanced simultaneous removal of multiple aqueous pollutants and the production of valuable biomass. The MPBR was optimized by integrating the regulation of light intensity (3000, 8000 and 23000 lux) and microbial extracellular electron extraction (using an electrode at -0.3, 0 and 0.3 V). Results showed that the MPBR operated at a high light intensity (23000 lux) with a potential of -0.3 V (Coulomb efficiency (CE) of 9.65%) achieved maximum pollutant removal efficiencies, effectively removing 65% NH4+-N, 95% PO43--P and 52% sulfadiazine (SDZ) within 72 h, exhibiting an increase by 30%, 56% and 26% compared to an MPBR operated at the same light intensity but without an externally applied potential. The use of an electrode with an applied potential of -0.3V was most suitable for the extraction of photosynthetic electrons from the photoelectroactive biofilm, in which Rhodocyclaceae was highly enriched, effectively alleviating photoinhibition and thereby enhancing N, P assimilation and SDZ degradation under high light conditions. A maximum lipid content of 409.28 mg/g was obtained under low light intensity (3000 lux) conditions with an applied potential of 0.3 V (CE 9.08%), while a maximum protein content of 362.29 mg/g was obtained at a low light intensity (3000 lux) and 0 V (CE 10.71%). The selective enrichment of Chlorobium and the subsequent enhanced conversion of excess available carbon under low light and positive potential stimulation conditions, were responsible for the enhanced accumulation of proteins and lipids in biomass.