P1' specificity of the S219V/R203G mutant tobacco etch virus protease.

Proteases that recognize linear amino acid sequences with high specificity became indispensable tools of recombinant protein technology for the removal of various fusion tags. Due to its stringent sequence specificity, the catalytic domain of the nuclear inclusion cysteine protease of tobacco etch virus (TEV PR) is also a widely applied reagent for enzymatic removal of fusion tags. For this reason, efforts have been made to improve its stability and modify its specificity. For example, P1' autoproteolytic cleavage-resistant mutant (S219V) TEV PR was found not only to be nearly impervious to self-inactivation, but also exhibited greater stability and catalytic efficiency than the wild-type enzyme. An R203G substitution has been reported to further relax the P1' specificity of the enzyme, however, these results were obtained from crude intracellular assays. Until now, there has been no rigorous comparison of the P1' specificity of the S219V and S219V/R203G mutants in vitro, under carefully controlled conditions. Here, we compare the P1' amino acid preferences of these single and double TEV PR mutants. The in vitro analysis was performed by using recombinant protein substrates representing 20 P1' variants of the consensus TENLYFQ*SGT cleavage site, and synthetic oligopeptide substrates were also applied to study a limited set of the most preferred variants. In addition, the enzyme-substrate interactions were analyzed in silico. The results indicate highly similar P1' preferences for both enzymes, many side-chains can be accommodated by the S1' binding sites, but the kinetic assays revealed lower catalytic efficiency for the S219V/R203G than for the S219V mutant.

Plant virus-derived nanoparticles decorated with genetically encoded SARS-CoV-2 nanobodies display enhanced neutralizing activity.

Viral nanoparticles (VNPs) are a new class of virus-based formulations that can be used as building blocks to implement a variety of functions of potential interest in biotechnology and nanomedicine. Viral coat proteins (CP) that exhibit self-assembly properties are particularly appropriate for displaying antigens and antibodies, by generating multivalent VNPs with therapeutic and diagnostic potential. Here, we developed genetically encoded multivalent VNPs derived from two filamentous plant viruses, potato virus X (PVX) and tobacco etch virus (TEV), which were efficiently and inexpensively produced in the biofactory Nicotiana benthamiana plant. PVX and TEV-derived VNPs were decorated with two different nanobodies recognizing two different regions of the receptor-binding domain (RBD) of the SARS-CoV-2 Spike protein. The addition of different picornavirus 2A ribosomal skipping peptides between the nanobody and the CP allowed for modulating the degree of VNP decoration. Nanobody-decorated VNPs purified from N. benthamiana tissues successfully recognized the RBD antigen in enzyme-linked immunosorbent assays and showed efficient neutralization activity against pseudoviruses carrying the Spike protein. Interestingly, multivalent PVX and TEV-derived VNPs exhibited a neutralizing activity approximately one order of magnitude higher than the corresponding nanobody in a dimeric format. These properties, combined with the ability to produce VNP cocktails in the same N. benthamiana plant based on synergistic infection of the parent PVX and TEV, make these green nanomaterials an attractive alternative to standard antibodies for multiple applications in diagnosis and therapeutics.

Unexpected tobacco etch virus (TEV) protease cleavage of recombinant human proteins.

The tobacco etch virus (TEV) protease is a commonly used reagent for removal of solubility and purification tags from recombinant proteins and is cited as being highly specific for its canonical cleavage site. Flexibility in some amino acids within this recognition sequence has been described in the literature but researchers generally assume few native human proteins will carry off-target sequences for TEV cleavage. We report here the aberrant cleavage of three human proteins with non-canonical TEV protease cleavage sites and identify broader sequence specificity rules that can be used to predict unwanted cleavage of recombinant proteins. Using these rules, 456 human proteins were identified that could be substrates for unwanted TEV protease cleavage.

Senna multiglandulosa, a new natural host for Tobacco etch virus in Mexico.

Plants of Senna multiglandulosa (family Fabaceae), an ornamental shrub, growing adjacent to tomato and chrysanthemum greenhouses located in San Diego, Texcoco, Estado de Mexico, had leaves with putative virus symptoms, consisting of annular or irregular chlorotic spots of different sizes (Supplementary Fig. 1a). To investigate the presence of a virus, high-throughput sequencing (HTS) was performed. Total RNA was extracted from symptomatic leaves of S. multiglandulosa plants using the SV Total RNA Isolation System Kit (Promega, USA). A portion of the RNA was sent to BGI Genomics (China) for cDNA library construction and sequencing on the DNBSEQ platform (BGI Genomics). HTS yielded 14,673,469 clean paired reads (150x2), which were assembled de novo into 91,879 contigs using SPAdes v3.15 software (Prjibelski et al. 2020). The contigs ranged from 78 to 14,534 nucleotides (nts), which were subjected to BLASTx and BLASTn analyses. A single viral contig of 9,501 nts was detected (average coverage: 56,716x per nt) representing the nearly complete genome of tobacco etch virus (TEV). The highest identity was 79.26% at the nt level (92% query coverage) with TEV isolate TEV7DA (GenBank: DQ986288; length: 9,539 nts) from the USA, and 86.67% at the amino acid (aa) level considering the polyprotein, which are higher than the species demarcation threshold (<76% nt and <82% aa) for the genus Potyvirus (Inoue-Nagata et al. 2022). Additionally, the sequence obtained from S. multiglandulosa revealed 79.21-79.37% nt identities with different TEV isolates from Solanaceae plants (Capsicum annuum, MW748496; Solanum lycopersicum, OM471966.1; Nicotiana tabacum, OL311684.1). The new TEV genome was deposited in GenBank under accession number ON110203. The results obtained by HTS were confirmed by RT-PCR with the original isolated RNA using a pair of specific primers designed from the TEV sequence (TEV-NIb-F, 5'- GCGCTTAAATGCAGACTCGG-3' and TEV-NIb-R, 5'-GTGAAAGTTCAGCAGCAAGCGCA-3') that amplify a 550-bp fragment of the RNA-dependent RNA polymerase. The obtained amplicon was sequenced by the Sanger method, and was 100% identical to the sequence generated by HTS. Subsequently, N. tabacum and N. glutinosa plants were mechanically inoculated using TEV-positive S. multiglandulosa leaves as the inoculum source. Twenty days after inoculation, light chlorotic spots and necrotic lesions were observed on N. tabacum and mosaic on N. glutinosa (Supplementary Fig. 1b-c). RT-PCR analysis confirmed the presence of TEV infection in these indicator plants. To determine the incidence of S. multiglandulosa plants showing TEV-infection symptoms, a survey (n=16) was carried out on two farms in Texcoco; the survey showed a 100% incidence of symptoms. Five survey samples were randomly selected, and the presence of TEV was confirmed by RT-PCR. The discovery of Tobacco etch virus (family Potyviridae: genus Potyvirus) in tobacco was reported in Kentucky, USA in 1928 (Valleau and Johnson, 1928), one of the most common and damaging viruses for the chili crop in Mexico (Delgado, 1974). TEV causes heavy yield loss in several Solanaceae plants and infects more than 120 species in 19 families of dicotyledons (Holmes, 1946). S. obtusifolia (originally Cassia obtusifolia) was the first legume reported as a natural host of TEV in Florida, USA (Anderson, 1954). To our knowledge, this is the first report of the natural infection of S. multiglandulosa by TEV in Mexico and the first TEV genome isolated and sequenced from a legume. S. multiglandulosa is widely distributed in 16 states in Mexico, both cultivated and naturalized, however, it is not considered native to the country (Rzedowski and Calderón, 1997). The occurrence of TEV in S. multiglandulosa represents an alternative reservoir of the virus, with an important role in the epidemiology of the disease.

Efficient production of saffron crocins and picrocrocin in Nicotiana benthamiana using a virus-driven system.

Crocins and picrocrocin are glycosylated apocarotenoids responsible, respectively, for the color and the unique taste of the saffron spice, known as red gold due to its high price. Several studies have also shown the health-promoting properties of these compounds. However, their high costs hamper the wide use of these metabolites in the pharmaceutical sector. We have developed a virus-driven system to produce remarkable amounts of crocins and picrocrocin in adult Nicotiana benthamiana plants in only two weeks. The system consists of viral clones derived from tobacco etch potyvirus that express specific carotenoid cleavage dioxygenase (CCD) enzymes from Crocus sativus and Buddleja davidii. Metabolic analyses of infected tissues demonstrated that the sole virus-driven expression of C. sativus CsCCD2L or B. davidii BdCCD4.1 resulted in the production of crocins, picrocrocin and safranal. Using the recombinant virus that expressed CsCCD2L, accumulations of 0.2% of crocins and 0.8% of picrocrocin in leaf dry weight were reached in only two weeks. In an attempt to improve apocarotenoid content in N. benthamiana, co-expression of CsCCD2L with other carotenogenic enzymes, such as Pantoea ananatis phytoene synthase (PaCrtB) and saffron ß-carotene hydroxylase 2 (BCH2), was performed using the same viral system. This combinatorial approach led to an additional crocin increase up to 0.35% in leaves in which CsCCD2L and PaCrtB were co-expressed. Considering that saffron apocarotenoids are costly harvested from flower stigma once a year, and that Buddleja spp. flowers accumulate lower amounts, this system may be an attractive alternative for the sustainable production of these appreciated metabolites.

A recombinant fusion protein-based, fluorescent protease assay for high throughput-compatible substrate screening.

In connection with the intensive investigation of proteases, several methods have been developed for analysis of the substrate specificity. Due to the great number of proteases and the expected target molecules to be analyzed, time- and cost-efficient high-throughput screening (HTS) methods are preferred. Here we describe the development and application of a separation-based HTS-compatible fluorescent protease assay, which is based on the use of recombinant fusion proteins as substrates of proteases. The protein substrates used in this assay consists of N-terminal (hexahistidine and maltose binding protein) fusion tags, cleavage sequences of the tobacco etch virus (TEV) and HIV-1 proteases, and a C-terminal fluorescent protein (mApple or mTurquoise2). The assay is based on the fluorimetric detection of the fluorescent proteins, which are released from the magnetic bead-attached substrates by the proteolytic cleavage. The protease assay has been applied for activity measurements of TEV and HIV-1 proteases to test the suitability of the system for enzyme kinetic measurements, inhibition studies, and determination of pH optimum. We also found that denatured fluorescent proteins can be renatured after SDS-PAGE of denaturing conditions, but showed differences in their renaturation abilities. After in-gel renaturation both substrates and cleavage products can be identified by in-gel UV detection.

An anti-peptide monoclonal antibody recognizing the tobacco etch virus protease-cleavage sequence and its application to a tandem tagging system.

Peptide-based affinity tags are commonly used in recombinant production/purification of proteins, and are often preceded or followed by a protease recognition sequence to allow tag removal. We describe a rat monoclonal antibody 2H5 recognizing an undecapeptide tag called "eTev", which contains a recognition sequence for Tobacco Etch Virus (TEV) protease. In the crystal structure of 2H5-eTev complex, the long eTev peptide assumes compact α-helical conformation in the binding groove, exposing both ends to the solution. This architecture allowed us to connect eTev with another peptide tag called PA tag via linker sequence, ensuring the simultaneous access of two anti-tag antibodies. When this tandem double tag was attached at one end of various proteins, it enabled highly sensitive and protein-independent detection by sandwich ELISA. Utilizing this system during a rapid cell line screening, we succeeded in isolating stable cell clones expressing high level of mouse Wise protein.

A TILLING approach to generate broad-spectrum resistance to potyviruses in tomato is hampered by eIF4E gene redundancy.

Genetic resistance to pathogens is important for sustainable maintenance of crop yields. Recent biotechnologies offer alternative approaches to generate resistant plants by compensating for the lack of natural resistance. Tomato (Solanum lycopersicum) and related species offer a model in which natural and TILLING-induced potyvirus resistance alleles may be compared. For resistance based on translation initiation factor eIF4E1, we confirm that the natural allele Sh-eIF4E1(PI24)-pot1, isolated from the wild tomato species Solanum habrochaites, is associated with a wide spectrum of resistance to both potato virus Y and tobacco etch virus isolates. In contrast, a null allele of the same gene, isolated through a TILLING strategy in cultivated tomato S. lycopersicum, is associated with a much narrower resistance spectrum. Introgressing the null allele into S. habrochaites did not extend its resistance spectrum, indicating that the genetic background is not responsible for the broad resistance. Instead, the different types of eIF4E1 mutations affect the levels of eIF4E2 differently, suggesting that eIF4E2 is also involved in potyvirus resistance. Indeed, combining two null mutations affecting eIF4E1 and eIF4E2 re-establishes a wide resistance spectrum in cultivated tomato, but to the detriment of plant development. These results highlight redundancy effects within the eIF4E gene family, where regulation of expression alters susceptibility or resistance to potyviruses. For crop improvement, using loss-of-function alleles to generate resistance may be counter-productive if they narrow the resistance spectrum and limit growth. It may be more effective to use alleles encoding functional variants similar to those found in natural diversity.

Cleavage of fusion proteins on the affinity resins using the TEV protease variant.

It is documented that the tobacco etch virus protease (TEVp) variant TEVp3M is less efficient in cleaving the fusion protein bound to Ni-NTA resin at relatively low temperature. Here, we determined that, using the GFP fusion substrate bound to Ni-NTA or Strep-tactin agarose, activity of the TEVp5M variant was higher than that of the other TEVp construct, and about 15% higher than that of the TEVp3M. The GST fusion proteins immobilized on Strep-tactin agarose or Glutathione Sepharose were efficiently cleaved by purified TEVp5M at specified conditions using GFP reporter for visual track and detection. After on-column cleavage of three fusion constructs using the cognate TEVp5M constructs, two target proteins with relatively high purity were separated from Ni-NTA or Amylose agarose. With elution of the buffer containing 1 M NaCl, maize sulfiredoxin was released from Ni-NTA resin via on-column cleavage. Our results confirmed that TEVp5M efficiently cleaved the fusion proteins bound to the four affinity matrices. By combination with appropriate affinity handles, the cognate TEVp5M mediating tag removal enabled purification and cleavage of the fusion proteins, removal of the protease, and separation of the target proteins from the affinity resin to be accomplished in one step.

A dual protease approach for expression and affinity purification of recombinant proteins.

We describe a new method for affinity purification of recombinant proteins using a dual protease protocol. Escherichia coli maltose binding protein (MBP) is employed as an N-terminal tag to increase the yield and solubility of its fusion partners. The MBP moiety is then removed by rhinovirus 3C protease, prior to purification, to yield an N-terminally His6-tagged protein. Proteins that are only temporarily rendered soluble by fusing them to MBP are readily identified at this stage because they will precipitate after the MBP tag is removed by 3C protease. The remaining soluble His6-tagged protein, if any, is subsequently purified by immobilized metal affinity chromatography (IMAC). Finally, the N-terminal His6 tag is removed by His6-tagged tobacco etch virus (TEV) protease to yield the native recombinant protein, and the His6-tagged contaminants are removed by adsorption during a second round of IMAC, leaving only the untagged recombinant protein in the column effluent. The generic strategy described here saves time and effort by removing insoluble aggregates at an early stage in the process while also reducing the tendency of MBP to "stick" to its fusion partners during affinity purification.

Self-assembly of hexahistidine-tagged tobacco etch virus capsid protein into microfilaments that induce IgG2-specific response against a soluble porcine reproductive and respiratory syndrome virus chimeric protein.

BACKGROUND: Assembly of recombinant capsid proteins into virus-like particles (VLPs) still represents an interesting challenge in virus-based nanotechnologies. The structure of VLPs has gained importance for the development and design of new adjuvants and antigen carriers. The potential of Tobacco etch virus capsid protein (TEV CP) as adjuvant has not been evaluated to date. FINDINGS: Two constructs for TEV CP expression in Escherichia coli were generated: a wild-type version (TEV-CP) and a C-terminal hexahistidine (His)-tagged version (His-TEV-CP). Although both versions were expressed in the soluble fraction of E. coli lysates, only His-TEV-CP self-assembled into micrometric flexuous filamentous VLPs. In addition, the His-tag enabled high yields and facilitated purification of TEV VLPs. These TEV VLPs elicited broader IgG2-specific antibody response against a novel porcine reproductive and respiratory syndrome virus (PRRSV) protein when compared to the potent IgG1 response induced by the protein alone. CONCLUSIONS: His-TEV CP was purified by immobilized metal affinity chromatography and assembled into VLPs, some of them reaching 2-µm length. TEV VLPs administered along with PRRSV chimeric protein changed the IgG2/IgG1 ratio against the chimeric protein, suggesting that TEV CP can modulate the immune response against a soluble antigen.

A simple method for recombinant protein purification using self-assembling peptide-tagged tobacco etch virus protease.

Recombinant protein purification remains to be a major challenge in biotechnology and medicine. In this paper we report a simple method for recombinant protein purification using self-assembling peptide-tagged tobacco etch virus protease (TEVp). After construction of an N-terminal ELK16 peptide fusion expression vector, we expressed ELK16-TEVp fusion protein in E. coli. SDS-PAGE analysis showed that ELK16-TEVp was expressed as active protein aggregates which could be purified to 91% purity with 92% recovery by centrifugation in the presence 0.5% Triton X-100. By using His-tagged bovine interferon-γ (His-BoIFN-γ) as the substrate, we demonstrated that EKL16-TEVp had a protease activity of 1.3 × 10(4) units/mg protein with almost 100% cleavage efficiency under the optimized conditions. More importantly, EKL16-TEVp could be removed from the cleavage reaction by single-step centrifugation. After removing the His-tag by nickel-conjugated agarose bead absorption, the recombinant BoIFN-γ (rBoIFN-γ) was purified to 98.3% purity with 63% recovery. The rBoIFN-γ had an antiviral activity of 1.6 × 10(3) units/mg protein against vesicular stomatitis virus. These data suggest that ELK16-TEVp may become a universal tool for recombinant protein purification.

Single-step affinity and cost-effective purification of recombinant proteins using the Sepharose-binding lectin-tag from the mushroom Laetiporus sulphureus as fusion partner.

Previous research showed that a lectin from the mushroom Laetiporus sulphureus, designed LSL, bound to Sepharose and could be eluted by lactose. In this study, by taking advantage of the strong affinity of LSL-tag for Sepharose, we developed a single-step purification method for LSL-tagged fusion proteins. We utilized unmodified Sepharose-4B as a specific adsorbent and 0.2 M lactose solution as an elution buffer. Fusion proteins of LSL-tag and porcine circovirus capsid protein, designated LSL-Cap was recovered with purity of 90 ± 4%, and yield of 87 ± 3% from crude extract of recombinant Escherichia coli. To enable the remove of LSL-tag, tobacco etch virus (TEV) protease recognition sequence was placed downstream of LSL-tag in the expression vector, and LSL-tagged TEV protease, designated LSL-TEV, was also expressed in E. coli., and was recovered with purity of 82 ± 5%, and yield of 85 ± 2% from crude extract of recombinant E. coli. After digestion of LSL-tagged recombinant proteins with LSL-TEV, the LSL tag and LSL-TEV can be easily removed by passing the digested products through the Sepharose column. It is of worthy noting that the Sepharose can be reused after washing with PBS. The LSL affinity purification method enables rapid and inexpensive purification of LSL-tagged fusion proteins and scale-up production of native proteins.

Architecture of the hepatitis C virus E1 glycoprotein transmembrane domain studied by NMR.

Oligomerization of hepatitis C viral envelope proteins E1 and E2 is essential to virus fusion and assembly. Although interactions within the transmembrane (TM) domains of these glycoproteins have proven contributions to the E1/E2 heterodimerization process and consequent infectivity, there is little structural information on this entry mechanism. Here, as a first step towards our long-term goal of understanding the interaction between E1 and E2 TM-domains, we have expressed, purified and characterized E1-TM using structural biomolecular NMR methods. An MBP-fusion expression system yielded sufficient quantities of pure E1-TM, which was solubilized in two membrane-mimicking environments, SDS- and LPPG-micelles, affording samples amenable to NMR studies. Triple resonance assignment experiments and relaxation measurements provided information on the secondary structure and global fold of E1-TM in these environments. In SDS micelles E1-TM adopts a helical conformation, with helical stretches at residues 354-363 and 371-379 separated by a more flexible segment of residues 364-370. In LPPG micelles a helical conformation was observed for residues 354-377 with greater flexibility in the 366-367 dyad, suggesting LPPG provides a more native environment for the peptide. Replacement of key positively charged residue K370 with an alanine did not affect the secondary structure of E1-TM but did change the relative positioning within the micelle of the two helices. These results lay the foundation for structure determination of E1-TM and a molecular understanding of how E1-TM flexibility enhances its interaction with E2-TM during heterodimerization and membrane fusion.

Investigating the interactions of the 18kDa translocator protein and its ligand PK11195 in planar lipid bilayers.

The functional effects of a drug ligand may be due not only to an interaction with its membrane protein target, but also with the surrounding lipid membrane. We have investigated the interaction of a drug ligand, PK11195, with its primary protein target, the integral membrane 18kDa translocator protein (TSPO), and model membranes using Langmuir monolayers, quartz crystal microbalance with dissipation monitoring (QCM-D) and neutron reflectometry (NR). We found that PK11195 is incorporated into lipid monolayers and lipid bilayers, causing a decrease in lipid area/molecule and an increase in lipid bilayer rigidity. NR revealed that PK11195 is incorporated into the lipid chain region at a volume fraction of ~10%. We reconstituted isolated mouse TSPO into a lipid bilayer and studied its interaction with PK11195 using QCM-D, which revealed a larger than expected frequency response and indicated a possible conformational change of the protein. NR measurements revealed a TSPO surface coverage of 23% when immobilised to a modified surface via its polyhistidine tag, and a thickness of 51Å for the TSPO layer. These techniques allowed us to probe both the interaction of TSPO with PK11195, and PK11195 with model membranes. It is possible that previously reported TSPO-independent effects of PK11195 are due to incorporation into the lipid bilayer and alteration of its physical properties. There are also implications for the variable binding profiles observed for TSPO ligands, as drug-membrane interactions may contribute to the apparent affinity of TSPO ligands.

Rapid large-scale purification of myofilament proteins using a cleavable His6-tag.

With the advent of high-throughput DNA sequencing, the number of identified cardiomyopathy-causing mutations has increased tremendously. As the majority of these mutations affect myofilament proteins, there is a need to understand their functional consequence on contraction. Permeabilized myofilament preparations coupled with protein exchange protocols are a common method for examining into contractile mechanics. However, producing large quantities of myofilament proteins can be time consuming and requires different approaches for each protein of interest. In the present study, we describe a unified automated method to produce troponin C, troponin T, and troponin I as well as myosin light chain 2 fused to a His6-tag followed by a tobacco etch virus (TEV) protease site. TEV protease has the advantage of a relaxed P1' cleavage site specificity, allowing for no residues left after proteolysis and preservation of the native sequence of the protein of interest. After expression in Esherichia coli, cells were lysed by sonication in imidazole-containing buffer. The His6-tagged protein was then purified using a HisTrap nickel metal affinity column, and the His6-tag was removed by His6-TEV protease digestion for 4 h at 30°C. The protease was then removed using a HisTrap column, and complex assembly was performed via column-assisted sequential desalting. This mostly automated method allows for the purification of protein in 1 day and can be adapted to most soluble proteins. It has the advantage of greatly increasing yield while reducing the time and cost of purification. Therefore, production and purification of mutant proteins can be accelerated and functional data collected in a faster, less expensive manner.

Handicap-Recover Evolution Leads to a Chemically Versatile, Nucleophile-Permissive Protease.

Mutation of the tobacco etch virus (TEV) protease nucleophile from cysteine to serine causes an approximately ∼104 -fold loss in activity. Ten rounds of directed evolution of the mutant, TEVSer , overcame the detrimental effects of nucleophile exchange to recover near-wild-type activity in the mutant TEVSer X. Rather than respecialising TEV to the new nucleophile, all the enzymes along the evolutionary trajectory also retained the ability to use the original cysteine nucleophile. Therefore the adaptive evolution of TEVSer is paralleled by a neutral trajectory for TEVCys , in which mutations that increase serine nucleophile reactivity hardly affect the reactivity of cysteine. This apparent nucleophile permissiveness explains how nucleophile switches can occur in the phylogeny of the chymotrypsin-like protease PA superfamily. Despite the changed key component of their chemical mechanisms, the evolved variants TEVSer X and TEVCys X have similar activities; this could potentially facilitate escape from adaptive conflict to enable active-site evolution.

Expression, surface immobilization, and characterization of functional recombinant cannabinoid receptor CB2.

Human peripheral cannabinoid receptor CB2, a G protein-coupled receptor (GPCR) involved in regulation of immune response has become an important target for pharmaceutical drug development. Structural and functional studies on CB2 may benefit from immobilization of the purified and functional receptor onto a suitable surface at a controlled density and, preferably in a uniform orientation. The goal of this project was to develop a generic strategy for preparation of functional recombinant CB2 and immobilization at solid interfaces. Expression of CB2 as a fusion with Rho-tag (peptide composed of the last nine amino acids of rhodopsin) in E. coli was evaluated in terms of protein levels, accessibility of the tag, and activity of the receptor. The structural integrity of CB2 was tested by ligand binding to the receptor solubilized in detergent micelles, captured on tag-specific monoclonal 1D4 antibody-coated resin. Highly pure and functional CB2 was obtained by sequential chromatography on a 1D4- and Ni-NTA-resin and its affinity to the 1D4 antibody characterized by surface plasmon resonance (SPR). Either the purified receptor or fusion CB2 from the crude cell extract was captured onto a 1D4-coated CM4 chip (Biacore) in a quantitative fashion at uniform orientation as demonstrated by the SPR signal. Furthermore, the accessibility of the extracellular surface of immobilized CB2 and the affinity of interaction with a novel monoclonal antibody NAA-1 was studied by SPR. In summary, we present an integral strategy for purification, surface immobilization, ligand- and antibody binding studies of functional cannabinoid receptor CB2.

Interaction of mouse TTC30/DYF-1 with multiple intraflagellar transport complex B proteins and KIF17.

Intraflagellar transport (IFT) is a microtubule based system that supports the assembly and maintenance of cilia. Genetic and biochemical studies have identified two distinct complexes containing multiple proteins that are part of the IFT machinery. In this study we prepared mouse pituitary cells that expressed an epitope-tagged IFT protein and immuno-purified the IFT B complex from these cells. Mass spectrometry analysis of the isolated complex led to identification of a number of well known components of the IFT B complex. In addition, peptides corresponding to mouse tetratricopeptide repeat proteins, TTC30A1, TTC30A2 and TTC30B were identified. The mouse Ttc30A1, Ttc30A2, Ttc30B genes are orthologs of Caenorhabditis elegans dyf-1, which is required for assembly of the distal segment of the cilia. We used co-immunoprecipitation studies to provide evidence that, TTC30A1, TTC30A2 or TTC30B can be incorporated into a complex with a known IFT B protein, IFT52. We also found that TTC30B can interact with mouse KIF17, a kinesin which participates in IFT. In vitro expression in a cell-free system followed by co-immunoprecipitation also provided evidence that TTC30B can directly interact with several different IFT B complex proteins. The findings support the view that mouse TTC30A1, TTC30A2 and TTC30B can contribute to the IFT B complex, likely through interactions with multiple IFT proteins and also suggest a possible link to the molecular motor, KIF17 to support transport of cargo during IFT.

The novel structure of the cockroach allergen Bla g 1 has implications for allergenicity and exposure assessment.

BACKGROUND: Sensitization to cockroach allergens is a major risk factor for asthma. The cockroach allergen Bla g 1 has multiple repeats of approximately 100 amino acids, but the fold of the protein and its biological function are unknown. OBJECTIVE: We sought to determine the structure of Bla g 1, investigate the implications for allergic disease, and standardize cockroach exposure assays. METHODS: nBla g 1 and recombinant constructs were compared by using ELISA with specific murine IgG and human IgE. The structure of Bla g 1 was determined by x-ray crystallography. Mass spectrometry and nuclear magnetic resonance spectroscopy were used to examine the ligand-binding properties of the allergen. RESULTS: The structure of an rBla g 1 construct with comparable IgE and IgG reactivity to the natural allergen was solved by x-ray crystallography. The Bla g 1 repeat forms a novel fold with 6 helices. Two repeats encapsulate a large and nearly spherical hydrophobic cavity, defining the basic structural unit. Lipids in the cavity varied depending on the allergen origin. Palmitic, oleic, and stearic acids were associated with nBla g 1 from cockroach frass. One unit of Bla g 1 was equivalent to 104 ng of allergen. CONCLUSIONS: Bla g 1 has a novel fold with a capacity to bind various lipids, which suggests a digestive function associated with nonspecific transport of lipid molecules in cockroaches. Defining the basic structural unit of Bla g 1 facilitates the standardization of assays in absolute units for the assessment of environmental allergen exposure.