Fabrication and Characterization of Dissolving Microneedles for Transdermal Drug Delivery of Apomorphine Hydrochloride in Parkinson's Disease.

PURPOSE: We fabricated and characterized polyvinyl alcohol (PVA)-based dissolving microneedles (MNs) for transdermal drug delivery of apomorphine hydrochloride (APO), which is used in treating the wearing-off phenomenon observed in Parkinson's disease. METHODS: We fabricated MN arrays with 11 × 11 needles of four different lengths (300, 600, 900, and 1200 µm) by micromolding. The APO-loaded dissolving MNs were characterized in terms of their physicochemical and functional properties. We also compared the pharmacokinetic parameters after drug administration using MNs with those after subcutaneous injection by analyzing the blood concentration of APO in rats. RESULTS: PVA-based dissolving MNs longer than 600 µm could effectively puncture the stratum corneum of the rat skin with penetrability of approximately one-third of the needle length. Although APO is known to have chemical stability issues in aqueous solutions, the drug content in APO-loaded MNs was retained at 25°C for 12 weeks. The concentration of APO after the administration of APO-loaded 600-µm MNs that dissolved completely in skin within 60 min was 81%. The absorption of 200-µg APO delivered by MNs showed a Tmax of 20 min, Cmax of 76 ng/mL, and AUC0-120 min of 2,829 ng・min/mL, compared with a Tmax of 5 min, Cmax of 126 ng/mL, and AUC0-120 min of 3,224 ng・min/mL for subcutaneous injection. The bioavailability in terms of AUC0-120 min of APO delivered by MNs was 88%. CONCLUSION: APO-loaded dissolving MNs can deliver APO via skin into the systemic circulation with rapid absorption and high bioavailability.

Formulation and Characterization of Ethosomes for Transdermal Delivery of Prinsepia Utilis Rogle Seed Oil with Ameliorative Effects against UVB-Induced Skin Damage.

Prinsepia utilis seed oil (PUSO) is a natural medication obtained from Prinsepia utilis Rogle seed, which has been used for the treatment of skin diseases. The study aims to prepare ethosomes with high drug loading as a water-soluble transdermal vehicle to enhance the transdermal delivery of PUSO. PUSO-loaded ethosomes (PEs) were prepared using a cold method, and optimized by an orthogonal experimental design with entrapment efficiency (EE) as the dependent variable. The PEs prepared with the optimized formulation showed good stability, with a spherical shape under transmission electron microscopy (TEM), average particle size of 39.12 ± 0.85 nm, PDI of 0.270 ± 0.01, zeta potential of -11.3 ± 0.24 mV, and EE of 95.93 ± 0.43%. PEs significantly increased the skin deposition of PUSO compared to the PUSO suspension (P < 0.001). Moreover, the optimum formula showed significant ameliorative effects on ultraviolet B (UVB) irradiation-associated macroscopic and histopathological changes in mice skin. Therefore, PEs represent a promising therapeutic approach for the treatment of UVB-induced skin inflammation, with the potential for industrialization.

Exploring Alkyl Ester Salts of L-Amino Acid Derivatives of Ibuprofen: Physicochemical Characterization and Transdermal Potential.

This research presents novel ibuprofen derivatives in the form of alkyl ester salts of L-amino acids with potential analgesic, anti-inflammatory, and antipyretic properties for potential use in transdermal therapeutic systems. New derivatives of (RS)-2-[4-(2-methylpropyl)phenyl]propionic acid were synthesized using hydrochlorides of alkyl esters (ethyl, propyl, isopropyl, butyl, sec-butyl, tert-butyl, and pentyl) of L-glutamine. These were further transformed into alkyl esters of L-amino acid ibuprofenates through neutralization and protonation reactions. Characterization involved spectroscopic methods, including nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Various physicochemical properties were investigated, such as UV-Vis spectroscopy, polarimetric analysis, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, water solubility, octanol/water partition coefficient, and permeability through pig skin using Franz diffusion cells. The research confirmed the ionic structure of the obtained hydrochlorides of alkyl esters of L-amino acids and ibuprofenates of alkyl esters of L-glutamic acid. It revealed significant correlations between ester chain length and thermal stability, crystallinity, phase transition temperatures, lipophilicity, water solubility, skin permeability, and skin accumulation of these compounds. Compared to the parent ibuprofen, the synthesized derivatives exhibited higher water solubility, lower lipophilicity, and enhanced skin permeability. This study introduces promising ibuprofen derivatives with improved physicochemical properties, highlighting their potential for transdermal therapeutic applications. The findings shed light on the structure-activity relationships of these derivatives, offering insights into their enhanced solubility and skin permeation, which could lead to more effective topical treatments for pain and inflammation.

A novel needle-free microjet drug injector using Er:YAG LASER: A completely new concept of transdermal drug delivery system.

The skin barrier effectively inhibits the penetration of substances; therefore, drug delivery, especially the delivery of drugs that are hydrophilic, through the skin, is challenging. Objectives: Physicians in the esthetic field now use the transdermal drug delivery system to attempt to deliver esthetic materials, such as hyaluronic acid and poly-DL-lactic acid into the skin. Conventionally, esthetic physicians manually injected these materials using needle syringes into the dermis layer. However, the injection is often irregular, imprecise, slow, and painful. Injector devices have been developed to overcome these limitations. A total of five Korean cadavers (that of three men and two women with a mean age of 69.2 years; range, 60-73 years) underwent laser injection. We used a device called Er:YAG LASER to create the pressure needed for microjet delivery to the skin of the cadaver. Discussion: In this study, the first LASER pressure-based, needle-free microjet injector was used to deliver drugs effectively into the dermis of a cadaver. This study showed that a novel needle-free microjet injector using Er:YAG LASER can introduce beneficial, liquid, esthetic drugs into the papillary dermal layer (depth of 300um) with minimal epidermal damage.

The Study of Deep Eutectic Solvent Based on Choline Chloride and L-(+)-Tartaric Acid Diethyl Ester for Transdermal Delivery System.

Deep eutectic solvents (DESs) based on choline chloride (C) and L-(+)-tartaric acid diethyl ester (L) were prepared and used in transdermal drug delivery system (TDDS). The internal chemistry structure including the formation and changes of hydrogen bonds of choline chloride and L-(+)-tartaric acid diethyl ester DES was characterized via attenuated total reflection Fourier transform infrared (ATR-FTIR) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. The stoichiometric ratio of choline chloride to L-(+)-tartaric acid diethyl ester as well as water content affected the viscosity, glass transition temperature (Tg), and drug solubility of the DES. The viscosity and glass transition temperature of the DES (CL14) prepared at the ratio of 1:4 of choline chloride to L-(+)-tartaric acid diethyl ester were 1.19 Pa·s and - 44.01°C, respectively, and decreased to 0.10 Pa·s and - 55.31°C when 10% water (CL1410) was added. Taking diclofenac diethylamine (DDEA), the nonsteroidal anti-inflammatory drug as model, drug solubility was as high as 60 mg/ml and 250 mg/ml in CL14 and CL1410, respectively. The cumulative amount of DDEA was 4.63 ± 2.67 µg/cm2 and 15.27 ± 4.63 µg/cm2 for CL14 and CL1410, respectively, at 8 h. The mechanism of percutaneous permeability by the DES may be the disturbance of stratum corneum (SC) lipids as well as changes in the protein conformations. CL14 and CL1410 were also verified as low-cytotoxic and nonirritant. Therefore, the DESs studied are promising to be used in drug solubilization enhancement and transdermal drug delivery system.

Methods for evaluating penetration of drug into the skin: A review.

BACKGROUND: Skin being the largest organ of the human body plays a very important role in the permeation and penetration of the drug. In addition, the transdermal drug delivery system (TDDS) plays a major role in managing dermal infections and attaining sustained plasma drug concentration. Thus, evaluation of percutaneous penetration of the drug through the skin is important in developing TDDS for human use. MATERIAL AND METHODS: Various techniques are used for getting the desired drug penetration, permeation, and absorption through the skin in managing these dermal disorders. The development of novel pharmaceutical dosage forms for dermal use is much explored in the current era. However, it is very important to evaluate these methods to determine the bioequivalence and risk of these topically applied drugs, which ultimately penetrate and are absorbed through the skin. RESULTS: Currently, numerous skin permeation models are being developed and persuasively used in studying dermatopharmacokinetic (DPK) profile and various models have been developed, to evaluate the TDD which include ex vivo human skin, ex vivo animal skin, and artificial or reconstructed skin models. CONCLUSION: This review discusses the general physiology of the skin, the physiochemical characteristics affecting particle penetration, understand the models used for human skin permeation studies and understanding their advantages, and disadvantages.

Effects of electrical stimulation on skin surface.

Abstract: Skin is the largest organ in the body, and directly contact with the external environment. Articles on the role of micro-current and skin have emerged in recent years. The function of micro-current is various, including introducing various drugs into the skin locally or throughout the body, stimulating skin wounds healing through various currents, suppressing pain caused by various diseases, and promoting blood circulation for postoperative muscle rehabilitation, etc. This article reviews these efforts. Compared with various physical and chemical medical therapies, micro-current stimulation provides a relatively safe, non-invasive therapy with few side effects, giving modern medicine a more suitable treatment option. At the same time, the cost of the electrical stimulation generating device is relatively low, which makes it have wider space to and more clinical application value. The current micro-current stimulation technology has become more and more mature, but there are still many problems in its research. The design of the experiment and the selection of the current parameters not standardized and rigorous. Now, clear regulations are needed to regulate this field. Micro-current skin therapy has become a robust, reliable, and well-structured system.

[Preparation of triptolide-loaded dissolving microneedles and its transdermal penetration].

Triptolide(TP), the main active and toxic component of Tripterygium wilfordii, has the limitations of low bioavailability, poor absorption, low concentration in plasma, and small lethal dose. Microneedle(MN), the hybrid of hypodermic needle and transdermal patch, is a physical penetration-enhancing system. Dissolving microneedles(DMNs) can be tailored to specific needs of degradation rate. In this study, the TP-loaded DMNs(DMNs-TP) were prepared with the two-step centrifugation method. The optimal ratio of PVA to PVP K30, water content in matrix solution, demoulding method, and plasticizer for preparing DMNs were investigated with the indexes of formability and mechanical strength. The drug loading capacity was determined by HPLC and morphological characteristics were observed under an optical microscope. The mechanical properties were investigated by H&E staining and Franz diffusion cell was used to detect the in vitro skin permeation characteristics. Through the experiment, we confirmed that the optimal backing material should be PVA and PVP K30(3∶1) and the optimal ratio of matrix material to water should be 3∶4. The prepared DMNs-TP were pyramidal with smooth surface and length of approximately 550 µm. Each patch(2.75 cm~2) had the drug loading capacity of(153.41±2.29) µg, and TP was located in the upper part of the needle. The results of in vitro skin permeation assay demonstrated that the cumulative penetration of TP in DMNs-TP reached 80% in 24 h, while little TP solution penetrated the skin, which proved that DMNs promoted the transdermal delivery of TP.

Ropinirole Patch Versus Placebo, Ropinirole Extended-Release Tablet in Advanced Parkinson's Disease.

BACKGROUND: A dopamine agonist patch is an important treatment option for PD. OBJECTIVES: A randomized, double-blind, parallel-group, placebo-controlled trial was conducted to evaluate superiority of ropinirole hydrochloride patch over placebo and noninferiority to ropinirole hydrochloride extended-release tablet. METHODS: PD patients using levodopa received ropinirole patch (up to 64 mg/d), ropinirole tablets (up to 16 mg/d), or placebo once-daily (double-dummy technique). The primary endpoint was the change from baseline in the total score for the UPDRS Part III (on state) at week 16. RESULTS: The change of the least squares mean (95% confidence interval) in the UPDRS Part III total score was -9.8 (-10.8 to -8.7) with ropinirole patch, -4.3 (-5.8 to -2.8) with placebo, and -10.1 (-11.2 to -9.1) with ropinirole tablet. The difference between the ropinirole patch and placebo groups was -5.4 (-7.3 to -3.6), demonstrating superiority of the patch over placebo. The difference between the ropinirole patch and tablet groups was 0.3 (-1.2 to 1.8). The upper limit of the 95% confidence interval was smaller than the noninferiority limit of 2.5, demonstrating noninferiority of ropinirole patch to ropinirole tablet. In all three groups, most adverse events were mild or moderate and there were no serious safety concerns. CONCLUSIONS: Once-daily ropinirole patch was effective in advanced PD patients, having demonstrated superiority over placebo and noninferiority to ropinirole tablet, without causing serious safety problems. Ropinirole patch can be an alternative option for PD patients. © 2020 International Parkinson and Movement Disorder Society.

Cold Flow Evaluation in Transdermal Drug Delivery Systems by Measuring the Width of the Oozed Adhesive.

The objective of this study was to develop a simpler and more practical quantitative evaluation method of cold flow (CF) in transdermal drug delivery systems (TDDSs). CF was forcibly induced by loading a weight on a punched-out sample (bisoprolol and tulobuterol tapes). When the extent of CF was analyzed using the area of oozed adhesive as following a previously reported method, the CF profiles were looked different between the samples 12 mm in diameter subjected to a 0.5-kg weight and samples 24 mm in diameter subjected to a 2.0-kg weight despite an equal load per unit area (4.42 g/mm2). The width of oozed adhesive around the original sample was suggested to be an index that properly describes the relationship between the load per unit area and the extent of CF. Further, it was clarified that the average CF width over the entire circumference of the sample was the same whether the samples were round or square as long as the sample area and load were the same. We also observed a linear relationship between the CF width and the aspect ratio of oval and rectangular samples. These results indicated that the CF properties of typical TDDS products lacking CF-proof processing at the edges could be determined by testing samples cut from the product rather than the whole TDDS patch. The proposed width measuring method was simple and useful for optimizing the composition of the adhesive and for testing the quality of the product.

Formulation and Characterization of Nanosized Ethosomal Formulations of Antigout Model Drug (Febuxostat) Prepared by Cold Method: In Vitro/Ex Vivo and In Vivo Assessment.

Febuxostat (FXT) is a xanthine oxidase (XO) drug which indicated for the treatment of gout. FXT loaded nanosized ethosomes were prepared using cold method with varied concentrations of ethyl alcohol and soya lecithin (SL). The prepared ethosomes were characterized by size, entrapment efficiency (DEE), FT-IR, in vitro release, kinetic studies of in vitro release profile, in vitro skin permeation and deposition, and stability study. The selected ethosomal formulation was incorporated in HPMC gel and characterized for drug content, ex vivo diffusion study through rat skin, and in vivo study and determination of pharmacokinetic parameters using HPLC technique. The results of size analysis showed that minimum size was 124.2 ± 16.77 nm with PDI values between 0.2 and 0.6. The zeta potential was from - 43.5 ± 3.0 to - 20.6 ± 1.42 mV. DEE ranged from 48 to 86%. The results of in vitro skin permeation showed that the amount FXT permeated ranged from 43.33 ± 5.3 to 82.14 ± 5.8%, flux ranged from 14.85 to 28.02. The results of ex vivo study showed that the amount of FXT permeated from unprocessed FXT gel was 49.42 ± 3.29% which was lesser than from FXT ethosomal gel. The results of in vivo study showed that Cmax and tmax were significantly different and higher for transdermal administration of FXT than oral administration. The developed FXT nanosized selected ethosome-based transdermal drug delivery gel system would provide a promising method for better management of gout.

Lipid nanoparticles loading triptolide for transdermal delivery: mechanisms of penetration enhancement and transport properties.

BACKGROUND: In recent years, nanoparticles (NPs) including nanostructured lipid carries (NLC) and solid lipid nanoparticles (SLN) captured an increasing amount of attention in the field of transdermal drug delivery system. However, the mechanisms of penetration enhancement and transdermal transport properties of NPs are not fully understood. Therefore, this work applied different platforms to evaluate the interactions between skin and NPs loading triptolide (TPL, TPL-NLC and TPL-SLN). Besides, NPs labeled with fluorescence probe were tracked after administration to investigate the dynamic penetration process in skin and skin cells. In addition, ELISA assay was applied to verify the in vitro anti-inflammatory effect of TPL-NPs. RESULTS: Compared with the control group, TPL-NPs could disorder skin structure, increase keratin enthalpy and reduce the SC infrared absorption peak area. Besides, the work found that NPs labeled with fluorescence probe accumulated in hair follicles and distributed throughout the skin after 1 h of administration and were taken into HaCaT cells cytoplasm by transcytosis. Additionally, TPL-NLC could effectively inhibit the expression of IL-4, IL-6, IL-8, IFN-γ, and MCP-1 in HaCaT cells, while TPL-SLN and TPL solution can only inhibit the expression of IL-6. CONCLUSIONS: TPL-NLC and TPL-SLN could penetrate into skin in a time-dependent manner and the penetration is done by changing the structure, thermodynamic properties and components of the SC. Furthermore, the significant anti-inflammatory effect of TPL-NPs indicated that nanoparticles containing NLC and SLN could serve as safe prospective agents for transdermal drug delivery system.

Biodegradable Ingredient-Based Emulgel Loaded with Ketoprofen Nanoparticles.

Biodegradable materials are extensively employed to design nanocarriers that mimic extracellular environment in arthritis. The aim of this study was to formulate and characterize biocompatible, biodegradable ketoprofen-loaded chitosan-chondroitin sulfate (CHS-CS) nanoparticles with natural ingredients for transdermal applications. Polymers used in the design of nanocarriers are biodegradable and produce synergistic anti-inflammatory effect for the treatment of arthritis. For transdermal application, argan oil-based emulgel is utilized to impart viscosity to the formulation. Furthermore, naturally occurring argan oil synergizes anti-inflammatory effect of formulation and promotes skin penetration. CHS and CS form nanoparticles by polyelectrolyte complex formation or complex coacervation at pH 5.0. These particles were loaded into argan oil-based emulgel. Employing this method, nanoparticles were formulated with particle size in the range of 300-500 nm. These nanocarriers entrapped ketoprofen and showed more than 76% encapsulation efficiency and 77% release of the ketoprofen at pH 7.4 within 72 h. Drug releases from CHS-CS nanoparticles by mechanism of simple diffusion. Nanoparticle-loaded argan oil emulgel significantly enhanced skin penetration of ketoprofen as compared to marketed gel (p < 0.05). Nanocarriers prepared successfully delivered drug through transdermal route using natural ingredients. Graphical abstract ᅟ.

Efficacy and safety of the emedastine patch, a novel transdermal drug delivery system for allergic rhinitis: Phase III, multicenter, randomized, double-blinded, placebo-controlled, parallel-group comparative study in patients with seasonal allergic rhinitis.

BACKGROUND: The emedastine patch was developed in Japan as the first transdermal drug delivery system of emedastine difumarate for allergic rhinitis. METHODS: A multicenter, randomized, double-blind, placebo-controlled, parallel-group comparison was conducted in patients with seasonal allergic rhinitis. Patients were administered Emedastine patches (4 or 8 mg), placebo, or levocetirizine hydrochloride (5 mg tablet) once daily for 2 weeks (double-dummy technique). The primary objective was superiority to placebo by the change of the total nasal symptom score (sneezing, rhinorrhea, and nasal congestion) in Week 2. Levocetirizine was a reference drug and not a comparator in this study. RESULTS: A total of 1276 patients were randomized to receive the 4 mg emedastine patch (n = 384), 8 mg emedastine patch (n = 382), placebo (n = 384), or levocetirizine (n = 126). The least squares mean (LSM) of the change from baseline of the total nasal symptom score (TNSS) in Week 2 was significantly larger in both emedastine patch groups than in the placebo group (adjusted p < 0.0001). In secondary analysis, LSM of the change in the TNSS was -1.20, -1.49, -0.44, and -1.32 in the 4 mg emedastine patch, 8 mg patch, placebo, and levocetirizine, respectively. Reductions in the number of episodes and scores of individual nasal symptoms were all significantly larger throughout the day in the emedastine patch groups than the placebo group (all p < 0.05). No clinically significant safety problems occurred. CONCLUSIONS: The emedastine patch (4 and 8 mg) effectively and safely controlled symptoms of seasonal allergic rhinitis with sustained action throughout the day. STUDY REGISTRATION: JapicCTI-153092.

Nanostructured liquid crystalline formulation as a remarkable new drug delivery system of anti-epileptic drugs for treating children patients.

PURPOSE: Development of a new dosage-form of antiepileptic-drugs appropriated for children. METHODS: Clonazepam (Cl) was formulated as cubosomal-gel (cub-gel) to be used as a patch reservoir through transdermal-route. Cubosomes prepared using glycerol-mono-oleate(GMO)/Pluronic-F127(PF127) mixture. An actual-statistical design was used to investigate the effect of different stabilizing agents (Ethanol and PVA) and surfactant concentration on cubosomes' particle size and entrapping-efficiency. The selected formulae were evaluated by testing particle-morphology, in vitro drug release and stability. Cub-gel was prepared using selected cubosome formulae. The optimal cub-gel subjected to in vitro dissolution, ex-vivo permeation and skin deposition studies followed by studying its pharmacological effect. RESULTS: Using PVA or Et as stabilizers with PF127 significantly decreases the average cubosomes'PS (352 ±â€¯ 2.8 and 264 ±â€¯2.16 nm) and increases EE (58.97 ±â€¯4.57% and 54.21 ±â€¯3.89%). Cubosomes increase the initial release rate of Cl to ensure rapid therapeutic effect (37.39% and 46.04% in the first hour) followed by a prolonged release till 4 h. Cub-gel containing PVA showed significantly higher Cl-transdermal permeation when compared to Cl-suspension. Moreover, increases the retention-time (89.57% at 48 h) and skin-deposition up to 6-times. It also reduces the epileptic seizures and alters the behavioral parameters induced by pilocarpine. CONCLUSIONS: Cubosomal-gel could be considered an innovative dosage-form for Cl through the transdermal route.

Development of triptolide-nanoemulsion gels for percutaneous administration: physicochemical, transport, pharmacokinetic and pharmacodynamic characteristics.

BACKGROUND: This work aimed to provide useful information on the use of nanoemulsions for the percutaneous administration of triptolide. Lipid nanosystems have great potential for transdermal drug delivery. Nanoemulsions and nanoemulsion gels were prepared to enhance percutaneous permeation. Microstructure and in vitro/in vivo percutaneous delivery characteristics of triptolide (TPL)-nanoemulsions and TPL-nanoemulsion gels were compared. The integrity of the nanoemulsions and nanoemulsion gels during transdermal delivery and its effects on the surface of skin were also investigated. The penetration mechanisms of nanoemulsions and nanoemulsion gels were investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The transport characteristics of fluorescence-labelled nanoemulsions were probed using laser scanning confocal microscopy. A chronic dermatitis/eczema model in mice ears and the pharmacodynamic of the TPL-nanoemulsion gels were also investigated. RESULTS: Compared to TPL gels, significantly greater cumulative amounts of TPL-nanoemulsion gels and TPL-nanoemulsions penetrated rat skin in vitro. The in vivo microdialysis showed the concentration-time curve AUC0-t for TPL-NPs is bigger than the TPL-gels. At the same time, TPL-NPs had a larger effect on the surface of skin. By hydrating keratin and changing the structure of both the stratum corneum lipids and keratin, nanoemulsions and nanoemulsion gels influence skin to promote percutaneous drug penetration. Both hairfollicles and the stratum corneum are also important in this transdermal drug delivery system. Moderate and high dosages of the TPL-nanoemulsion gels can significantly improve the symptoms of dermatitis/eczema inflammation and edema erythematic in mice ears and can reduce the expression of IFN-γ and IL-4. Moreover, the TPL-nanoemulsion gels cause less gastrointestinal damage than that of the Tripterygium wilfordii oral tablet does. CONCLUSIONS: Nanoemulsions could be suitable for transdermal stably releasing drugs and maintaining the effective drug concentration. The TPL-nanoemulsion gels provided higher percutaneous amounts than other carriers did. These findings suggest that nanoemulsion gels could be promising percutaneous carriers for TPL. The TPL-nanoemulsion gels have a significant treatment effect on dermatitis/eczema in the mice model and is expected to provide a new, low-toxicity and long-term preparation for the clinical treatment of dermatitis/eczema in transdermal drug delivery systems.

How can lipid nanocarriers improve transdermal delivery of olanzapine?

The development of a transdermal nanocarrier drug delivery system with potential for the treatment of psychiatric disorders, such as schizophrenia and bipolar disorder, is described. Lipid nanocarriers (LN), encompassing various solid:liquid lipid compositions were formulated and assessed as potential nanosystems for transdermal delivery of olanzapine. A previously optimized method of hot high pressure homogenization (HPH) was adopted for the production of the LN, which comprised solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and nanoemulsions (NE). Precirol ® was selected as the solid lipid for progression of studies. SLN exhibited the best performance for transdermal delivery of olanzapine, based on in vitro release and permeation studies, coupled with results from physicochemical characterization of several solid:liquid lipid formulations. Stability tests, performed to give an indication of long-term storage behavior of the formulations, were in good agreement with previous studies for the best choice of solid:liquid lipid ratio. Overall, these findings highlight the SLN-based formulation as promising for the further inclusion in and production of transdermal patches, representing an innovative therapeutic approach.

Effects of Concentrations on the Transdermal Permeation Enhancing Mechanisms of Borneol: A Coarse-Grained Molecular Dynamics Simulation on Mixed-Bilayer Membranes.

Borneol is a natural permeation enhancer that is effective in drugs used in traditional clinical practices as well as in modern scientific research. However, its molecular mechanism is not fully understood. In this study, a mixed coarse-grained model of stratum corneum (SC) lipid bilayer comprised of Ceramide-N-sphingosine (CER NS) 24:0, cholesterol (CHOL) and free fatty acids (FFA) 24:0 (2:2:1) was used to examine the permeation enhancing mechanism of borneol on the model drug osthole. We found two different mechanisms that were dependent on concentrations levels of borneol. At low concentrations, the lipid system maintained a bilayer structure. The addition of borneol made the lipid bilayer loosen and improved drug permeation. The "pull" effect of borneol also improved drug permeation. However, for a strongly hydrophobic drug like osthole, the permeation enhancement of borneol was limited. When most borneol molecules permeated into bilayers and were located at the hydrophobic tail region, the spatial competition effect inhibited drug molecules from permeating deeper into the bilayer. At high concentrations, borneol led to the formation of water pores and long-lived reversed micelles. This improved the permeation of osthole and possibly other hydrophobic or hydrophilic drugs through the SC. Our simulation results were supported by Franz diffusion tests and transmission electron microscope (TEM) experiments.

Mechanical Characterization of Dissolving Microneedles: Factors Affecting Physical Strength of Needles.

Dissolving microneedles (MNs) are novel transdermal drug delivery systems that can be painlessly self-administered. This study investigated the effects of experimental conditions on the mechanical characterization of dissolving MNs for quality evaluation. Micromolding was used to fabricate polyvinyl alcohol (PVA)-based dissolving MN patches with eight different cone-shaped geometries. Axial force mechanical characterization test conditions, in terms of compression speed and the number of compression needles per test, significantly affected the needle fracture force of dissolving MNs. Characterization using selected test conditions clearly showed differences in the needle fracture force of dissolving MNs prepared under various conditions. PVA-based MNs were divided into two groups that showed buckling and unbuckling deformation, which occurred at aspect ratios (needle height/base diameter) of 2.8 and 1.8, respectively. The needle fracture force of PVA-based MNs was negatively correlated with an increase in the needle's aspect ratio. Higher residual water or higher loading of lidocaine hydrochloride significantly decreased the needle fracture force. Therefore, setting appropriate methods and parameters for characterizing the mechanical properties of dissolving MNs should contribute to the development and supply of appropriate products.