Surgical approach through the anterior scalene muscle resection for invasive tumours in the supraclavicular fossa (with video).

BACKGROUND: The supraclavicular fossa contains many vital organs to be preserved, such as the brachial plexus, subclavian artery and vertebral artery. Various surgical methods have been reported. However, no well-standardized surgical procedure has been established. METHODS: Between 2010 and 2020, we performed 28 surgical treatments of the superior mediastinum and supraclavicular fossa. Of these, we retrospectively reviewed seven cases of supraclavicular invasion using a unified surgical technique in which the anterior scalene muscle was resected, and the inter-scalene triangle was approached. RESULTS: We performed claviculectomy in four cases and a transmanubrial approach in three cases. In all cases, by resecting the anterior scalene muscle, the brachial plexus, subclavian artery and vertebral artery were preserved. There were no critical postoperative complications other than tracheostomy and lymphatic leakage. Median bleeding amount and operative time were 438 (range; 76-1144) ml and 328 (range; 246-615) minutes, respectively. CONCLUSIONS: The anterior scalene muscle resection method might be a safe and standardized method for preserving the brachial plexus, subclavian artery and vertebral artery.

Clinical effect of nice knot-assisted minimally invasive titanium elastic nail fixation to treat Robinson 2B midshaft clavicular fracture.

BACKGROUND: The treatment of completely displaced midshaft clavicle fractures is still controversial, especially Robinson 2B fractures. Titanium elastic nail (TEN) fixation is a good option for simple fractures, but no reports exist on its use in complex fractures. This study aimed to present a surgical method using the Nice knot-assisted TEN fixation to treat Robinson 2B midshaft clavicular fractures. METHODS: A retrospective analysis of 29 patients who underwent fixation with TEN and had a 1-year postoperative follow-up between 2016 and 2020 was performed. The fractures were classified as Robinson type 2B1 in 17 cases and type 2B2 in 12 cases. Length of the incision, postoperative shoulder function Disability of Arm Shoulder and Hand (DASH) score and Constant score, complications rate, and second surgical incision length were recorded. RESULTS: The length of the incision was 2-6 cm (average 3.7 cm). All incisions healed by first intention, and no infection or nerve injury occurred. The Constant score was 92-100 (average 96) and the DASH score was 0-6.2 (mean, 2.64). TEN bending and hypertrophic nonunion occurred in one case (3.4%) and implant irritation occurred in four cases (13.8%) Fixation implants were removed at 12-26 months (mean, 14.6 months) after surgery, and the length of the second incision was 1-2.5 cm (average 1.3 cm). CONCLUSIONS: Intramedullary fixation by TEN is approved as a suitable surgical technique in clavicular fracture treatment. Nice knot-assisted fixation provides multifragmentary fracture stabilization, contributing to good fracture healing. Surgeons should consider this technique in treating Robinson 2B midshaft clavicular fractures. TRIAL REGISTRATION: Retrospectively registered. This study was approved by the Ethics Committee of Wuxi Ninth People's Hospital (LW20220021).

Advances in Oncologic Shoulder Girdle Resection and Reconstruction.

The bony shoulder girdle consists of the clavicle, humerus, and scapula, which work synergistically to form a complex articulation that is essential for use of the upper extremity. The shoulder girdle is the most common location for primary and secondary bone tumors in the upper extremity, and following resection of these tumors, reconstruction of the upper extremity is challenging. Compared with those in the lower extremity, reconstructive techniques in the upper extremity have historically been unreliable and fraught with complications and poor functional outcomes. Newer reconstructive techniques using reverse total shoulder arthroplasty and functional muscle flaps have shown promise to improve outcomes while reducing complications for proximal humerus reconstructions. Despite these advancements, reconstruction following scapulectomy remains challenging and is still associated with more frequent complications and compromised function.

New generation of superior single plating vs. low-profile dual minifragment plating in diaphyseal clavicle fractures: a biomechanical comparative study.

BACKGROUND: Recently, a new generation of superior clavicle plates was developed featuring the variable-angle locking technology for enhanced screw positioning and a less prominent and optimized plate-to-bone fit design. On the other hand, minifragment plates in dual plating mode have demonstrated promising clinical results. The aim of the current study was to compare the biomechanical competence of single superior plating using the new-generation plate vs. dual plating using low-profile minifragment plates. METHODS: Sixteen paired human cadaveric clavicles were pairwise assigned to 2 groups for instrumentation with either a superior 2.7-mm variable-angle locking compression plate (group 1), or with one 2.5-mm anterior combined with one 2.0-mm superior matrix mandible plate (group 2). An unstable clavicle shaft fracture (AO/OTA 15.2C) was simulated by means of a 5-mm osteotomy gap. Specimens were cyclically tested to failure under craniocaudal cantilever bending, superimposed with bidirectional torsion around the shaft axis, and monitored via motion tracking. RESULTS: Initial construct stiffness was significantly higher in group 2 (9.28 ± 4.40 N/mm) compared to group 1 (3.68 ± 1.08 N/mm), P = .003. The amplitudes of interfragmentary motions in terms of axial and shear displacement, fracture gap opening and torsion, over the course of 12,500 cycles were significantly higher in group 1 compared to group 2, P ≤ .038. Cycles to 2 mm shear displacement were significantly lower in group 1 (22,792 ± 4346) compared to group 2 (27,437 ± 1877), P = .047. CONCLUSION: From a biomechanical perspective, low-profile 2.5/2.0-mm dual plates could be considered as a useful alternative for diaphyseal clavicle fracture fixation, especially in less common unstable fracture configurations.

Clavicular tunnel widening after coracoclavicular stabilization surgery: a systematic review and meta-analysis.

BACKGROUND: This systematic review and meta-analysis aimed to (1) estimate the prevalence of clavicular tunnel widening (TW) after coracoclavicular stabilization surgery and its risk factors and (2) assess whether TW is correlated with clavicle fracture or loss of reduction of the acromioclavicular joint (ACJ). METHODS: In January 2023, 3 electronic databases were searched to collect data on postoperative clavicular TW, its prevalence, magnitude, and correlation with fracture and ACJ loss of reduction. Studies were classified according to the time of surgical intervention, and the clavicular tunnels were categorized by their anatomic location. Mean differences were calculated using a DerSimonian-Laird random-effects model, while binomial outcomes were pooled using the Freeman-Tukey double arcsine transformation. Univariate and multivariate meta-regression analyses were performed to determine the effect of several variables on the proportion of cases with TW. RESULTS: Fifteen studies (418 shoulders) were included. At the final follow-up, evidence of clavicular TW was found in 70% (95% confidence interval [CI]: 70%-87%; I2 = 89%) of 221 shoulders. Surgeries in acute cases had a lower prevalence of TW (52%) compared to chronic cases (71%) (P < .001). Significant TW was found in the central tunnel (3.2 mm; 95% CI: 1.8-4.6 mm; P < .001; I2 = 72%) for acute injuries and in the medial (1.2 mm; 95% CI: 0.7-1.7 mm; P < .001; I2 = 77%) and lateral (1.5 mm; 95% CI: 0.7-2.3 mm; P < .001; I2 = 77%) tunnels for chronic cases. Single central-tunnel techniques were positively associated with the prevalence of TW (P = .046), while biotenodesis screw fixation was associated with a lower prevalence (P = .004) in chronic cases. Reconstruction of the ACJ ligament complex with tendon grafts or sutures was associated with a higher prevalence of TW (P < .001). Drill sizes between 2.5 and 5 mm were significantly associated with a lower prevalence of TW, regardless of injury chronicity (P = .012). No correlation was found between TW and the loss of ACJ reduction or clavicle fractures. CONCLUSIONS: This systematic review and meta-analysis explored TW occurrence following coracoclavicular stabilization surgery. TW was observed in 70% of patients at final follow-up, with a higher prevalence in chronic than in acute cases. Modifiable surgical variables, such as single-tunnel tendon graft constructs for acute or chronic injuries and knotted graft procedures for chronic injuries, were significantly associated with TW. Furthermore, the prevalence of TW increased with concomitant surgical treatment of the ACJ ligament complex, and decreased with drill sizes between 2.5 and 5 mm, regardless of lesion chronicity. These surgical variables should be considered when establishing transosseous tunnels for coracoclavicular stabilization. Clavicle fractures and TW mechanisms require further investigation.

Complex reconstruction of the clavicle with a prefabricated medial femur condyle chimeric flap including a superficial circumflex iliac artery perforator flap: A case report.

The medial femur condyle (MFC) cortico-periosteal flap is a popular flap for bone reconstruction. The use of a chimeric version of this flap with a skin island has been described, but anatomical arterial variation can occur that prevent its harvest. Furthermore, the donor area of the skin paddle has been debated as poor because of the scarring in a visible area and because of the difficulty in obtaining pliable thin skin. We present a fabricated chimeric MFC cortico-periosteal flap joined with a superficial inferior epigastric perforator (SCIP) flap to reconstruct and augment a sclerotic and insufficient small clavicula with the skin paddle acting as a monitor and as a substitute for the overlying skin. A 52-year-old female patient had a history of multiple refractures of the right hypoplastic clavicle with a diameter of 7 mm, resulting in a sclerotic bone with a fibrotic scar. The reconstruction was done in one surgical session using a cortico-periosteal flap from the left medial condyle and a thin SCIP flap from the left groin. The area of the clavicle to be reconstructed was 3 cm, and the direct overlying skin (approximately 6 × 3 cm) was severely scarred and painful. The MFC flap was 5 × 4 cm, while the SCIP flap was 7 × 3.5 cm. The SCIP flap artery was anastomosed on the table end-to-side to the descending genicular (DG) artery of the MFC, and the vein was anastomosed end-to-end to a comitans vein of the DG artery. The flap fully survived after an initial congestion. At 12 months, we observed a satisfactory reconstruction of the clavicle with an enhanced diameter of 12 mm. The patient recovered full function of the shoulder with no pain. Using a fabricated chimeric flap composed of a medial femoral condyle and a superficial circumflex artery perforator flap may be an additional option for tailored reconstruction of complex osteo-cutaneous defect of clavicle.

Comprehensive comparison between conservative therapy and surgical management for completely displaced and comminuted mid-shaft clavicle fractures.

PURPOSE: It is still controversial whether complete displaced mid-shaft clavicle fractures should be treated with internal fixation or conservative therapy. This retrospective study aims to compare clinical outcomes of two treatment protocols. MATERIALS AND METHODS: 105 patients with displaced and comminuted mid-shaft clavicle fractures were included in this study, among which 55 patients were treated conservatively and 50 patients accepted surgical fixation and were followed up for over 20 months on average. Rate of union, malunion, time taken for union, functional outcome, self-reported satisfaction and complications were compared. RESULTS: Union rate of operative group (n=49, 98.0%) was higher than the non-operative group (n=48, 87.3%). Time taken for union in operative group (2.37±1.06 months) was shorter than the non-operative group (3.69±1.01 months). Malunion and asymmetric were only seen in the conservative group. Numbness of the shoulder was only reported in the operative group (n=23, 46.0%). Most of patients in the operative group (n=45, 90%) accepted a second operation to remove the implant. No statistically difference was found in self-reported satisfaction, Quick-DASH and Constant-Murley score. The operative group returned to work faster (1.47±0.89 to 3.34±1.37 months), regained full range of motion earlier (1.66±0.78 to 3.83±1.24 months) and regained strength faster (3.86±2.45 to 8.03±2.78 months) than the non-operative group. CONCLUSION: Complete displaced and comminuted mid-shaft clavicle fractures treated surgically have more reliable union and faster recovery when compared to conservatively treated fractures.

Precontoured dynamic compression plate using patient-specific 3D-printed models in minimally invasive surgical technique for midshaft clavicle fractures.

INTRODUCTION: This study introduced a novel approach for the treatment of midshaft clavicle fractures, utilizing patient-specific 3D-printed models for accurate preoperative contouring of dynamic compression plates (DCPs) and an alternative minimally invasive plate osteosynthesis (MIPO) technique with precontoured DCPs through small vertical separated incisions. PATIENT AND METHODS: Mirror image 3D clavicular models were reproduced from 40 patients with acute displaced midshaft clavicle fractures who underwent MIPO using precontoured DCPs inserted through small, vertical separated incisions. Exclusion criteria included patients with open fractures, pathological fractures, ipsilateral limb injury, skeletal immature patients, and those who had previous clavicle fractures or surgery. Postoperative evaluation was conducted using clinical and radiographic review. The Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were used for clinical evaluations, and the Patient and Observer Scar Assessment Scale was used to assess surgical scars. RESULTS: The average time to union of all fractures was 12.88 weeks (range, 8-15) without loss of reduction. The patient-specific precontoured DCPs fitted well in all cases, with fracture consolidation and minimal three cortical sides connecting the fracture fragment. No hardware prominence and skin complications occurred, and clinical evaluation showed no existing difference compared with the contralateral sides. The average Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were 96.33 ± 3.66 and 93.26 ± 5.15, respectively. Two patients requested their implant removal, and scar qualities were satisfactory. CONCLUSIONS: Our study demonstrated that the use of a patient-specific precontoured DCP, in combination with 3D printing technology, provides accurate preoperative planning, effective fracture reduction, and improved postoperative outcomes in displaced midshaft clavicle fractures. The MIPO with a patient-specific precontoured DCP through separated vertical incisions along the Langer's lines appears to be a promising option, regarding appearance, avoiding associated complications, and obviating the need for reoperation. These results suggest that this technique has merit and can be a viable option for the treatment of midshaft clavicle fractures.

Do multiple fractures affect risk of fixation failure after surgical treatment of midshaft clavicle fracture? A retrospective cohort study.

BACKGROUND: Surgical treatment of midshaft clavicle fractures is associated with quick recovery and low risk of non-union. However, fixation failure may occur in case of severe comminution fractures. Moreover, clinical outcomes may be affected when clavicle fractures occur in combination with other injuries, particularly those involving the lower extremities, as the use of crutches or walkers may hinder the process of rehabilitation by adding strain on the acromioclavicular (AC) joint, resulting in possible fixation failure. This study aims to identify risk factors for fixation failure of midshaft clavicle fractures and elucidate the role of combined fractures in treatment outcomes. METHODS: This study included patients diagnosed with midshaft clavicle fractures who underwent initial surgery between January 2012 and November 2021 at a designated regional trauma center hospital. Retrospective evaluation of fixation failure was carried out in 352 patients with midshaft clavicle fractures using standard clinical evaluation protocols and conventional radiographs. The prevalence of fixation failure and the effects of several demographic variables on the risk of fixation failure and non-union were examined. Multivariate logistic regression analysis was carried out to identify independent risk factors for fixation failure. RESULTS: Fixation failure occurred in 40 patients (11.4%). Multivariate analysis identified comminution [odds ratio (OR) 3.532, p value = 0.003, 95% confidence interval (CI) 1.55-8.05)] and fewer number of screws (OR 0.223, p value = 0.022, 95% CI 0.06-0.80) as risk factors for fixation failure. Surgical techniques using wire cerclage reduced the chances of fixation failure in comminuted fractures (OR 0.63, p value = 0.033, 95% CI 0.05-0.80). Combined fractures that required rehabilitation using walkers or crutches increased the risk of non-union (OR 19.043, p value = 0.032, 95% CI 1.28-282.46). CONCLUSIONS: Additional fixation of comminuted fractures using cerclage can reduce the risk of treatment failure, while multiple fractures or rehabilitation for ambulation increases the risk of the same. LEVEL OF EVIDENCE: III.

Postoperative recreational sports and subjective shoulder function: a comprehensive analysis following intramedullary stabilization of displaced midshaft clavicular fractures.

Introduction Sports-related outcomes and the role of recreational sports activities for shoulder function after intramedullary stabilization (IMS) of displaced midshaft clavicular fractures (DMCFs) in the general population are not well known. In this study, we aimed to determine the sport-related outcomes (return-to-sports [RTS] rate, type of sports, time until RTS, and intensity) and to explore the role of sports after IMS of DMCFs. Materials and Methods This single-center, retrospective, cohort study included patients who underwent IMS of DMCFs between 2009 and 2022 at a Level II trauma center in Germany, experienced no major complications, and had completed at least 1 year of follow-up. Propensity score matching was conducted to obtain a balanced sample of patients who did not engage (cases) and engaged (controls) in postoperative sports activities by adjusting for age and fracture complexity. Groups were compared to assess the impact of regular sports activities on subjective shoulder functioning at follow-up, as evaluated using the Disabilities of the Arm, Shoulder, and Hand and Oxford Shoulder Score (OSS) questionnaires, after controlling for the patient- (i.e., sex and smoking) and treatment- (i.e., surgery duration and physical therapy) factors. Results Among the 199 patients included, the RTS rate was 97.5%, and 160 patients practiced regular postoperative activity, mostly in the same sport and intensity. In the matched cohort (39 cases and 39 controls), practicing regular sports activities postoperatively was the only independent factor associated with a higher OSS in the multiple regression analysis (unstandardized regression coefficient = 2.40; Bias-corrected and accelerated 95% confidence interval [0.28, 4.69]). Conclusions The sport-related outcomes after IMS of DMCFs in our cohort were comparable to those achieved after plate osteosynthesis, and IMS reported in the literature. Recreational sports activities benefitted subjective shoulder function, thereby encouraging further research and potentially influencing management policies. Level of evidence Grade IV - a retrospective observational cohort study.

Comparison of the use of biocompatible materials and titanium in the treatment of midshaft clavicle fractures with a patient-specific plate: a finite element analysis study.

BACKGROUND: Clavicular midshaft fractures treated with titanium plates may encounter complications like implant failure. We assess if alternative biocompatible materials suchs as PLA, PLA/HA, PEEK offer comparable stability. Our study evaluates the biomechanical performance of these materials in surgical management of midshaft clavicle fractures. METHODS: We simulated a personalized fixation implant with four different materials and conducted finite element analysis in ANSYS to assess maximum von Mises stress (MvMs). RESULTS: The MvMs occurring on the plates, screws, clavicle, and fracture site were recorded. MvMs on titanium material at the 6th hole level (764.79 MPa) and the 6th screw level (503.38 MPa), with the highest stresses observed at 48.52 MPa on the lateral clavicle at the 1st hole level and 182.27 MPa on the medial clavicle at the 6th hole level. In PLA material analyses, the highest MvMs were observed at the 3rd hole level (340.6 MPa) and the 3rd screw level (157.83 MPa), with peak stresses at 379.63 MPa on the lateral clavicle fracture line and 505.44 MPa on the medial clavicle fracture line. In PLA/HA material analyses, the highest MvMs were at the 3rd hole (295.99 MPa) and 3rd screw (128.27 MPa), with peak stresses at 220.33 MPa on the lateral clavicle and 229.63 MPa on the medial clavicle fracture line. In PEEK material analyses, the highest MvMs were at the 3rd hole (234.74 MPa) and 6th screw (114.48 MPa), with peak stresses at 184.36 MPa on the lateral clavicle and 180.1 MPa on the medial clavicle. CONCLUSION: Our findings indicate that titanium material shows significantly higher stresses on plates and screws compared to those on the clavicle, suggesting a risk of implant failure. PLA and PLA/HA were inadequate for fixation. Although stress on the plate with PEEK material is higher than on the clavicle, it remains lower than titanium, indicating potential stability at fracture site. Further research is needed to confirm these findings.

Tendon graft through the coracoid tunnel versus under the coracoid for coracoclavicular/acromioclavicular reconstruction shows no difference in radiographic or patient-reported outcomes.

INTRODUCTION: The purpose of this prospective study was to report the outcomes of two different methods in CC and AC reconstruction for the treatment of AC separation using a tendon graft and knot-hiding titanium clavicular implant. MATERIALS AND METHODS: Twenty-seven patients with Rockwood grade III and V acromioclavicular (AC) separations were randomized into two groups. The primary outcome was whether taking the tendon graft through the coracoid risked a fracture. The following were secondary outcomes: follow-up of clavicular wound healing and Nottingham Clavicle score, Constant score, and Simple Shoulder Test results obtained preoperatively and 24 months postoperatively. The anteroposterior radiographic change between the clavicular and coracoid cortexes and the clavicular tunnel diameter was measured postoperatively and 24 months postoperatively. General patient satisfaction with the outcome (poor, fair, good, or excellent) was assessed 2 years postoperatively. RESULTS: No coracoid fractures were detected. No issues in clavicular wound healing were detected. The mean Nottingham Clavicle score increased from a preoperative mean of 42.42 ± 13.42 to 95.31 ± 14.20 (P < 0.00). The Constant score increased from a preoperative mean of 50.81 ± 17.77 to 96.42 ± 11.51 (P < 0.001). The Simple Shoulder Test score increased from a preoperative mean of 7.50 ± 2.45 to 11.77 ± 1.18 (P < 0.001). The changes were significant. The coracoclavicular distance increased from 11.88 ± 4.00 to 14.19 ± 4.71 mm (P = 0.001), which was significant. The clavicular drill hole diameter increased from 5.5 to a mean of 8.00 ± 0.75 mm. General patient satisfaction was excellent. CONCLUSIONS: There were no significant differences between the two groups. There were no implant related complications in the clavicular wound healing. The results support the notion that good results are achieved by reconstructing both the CC and AC ligaments with a tendon graft. STUDY REGISTRATION: This clinical trial was registered on Clinicaltrials.gov.

Ex vivo analysis of cortical microarchitecture of the distal clavicle: implications for surgical management of fractures.

BACKGROUND: Cortical thickness and porosity are two main determinants of cortical bone strength. Thus, mapping variations in these parameters across the full width of the distal end of the clavicle may be helpful for better understanding the basis of distal clavicle fractures and for selecting optimal surgical treatment. METHODS: Distal ends of 11 clavicles (6 men, 5 women; age: 81.9 ± 15.1 years) were scanned by micro-computed tomography at 10-µm resolution. We first analyzed cortical thickness and porosity of each 500-µm-wide area across the superior surface of distal clavicle at the level of conoid tubercle in an antero-posterior direction. This level was chosen for detailed evaluation because previous studies have demonstrated its superior microarchitecture relative to the rest of the distal clavicle. Subsequently, we divided the full width of distal clavicle to three subregions (anterior, middle, and posterior) and analyzed cortical porosity, pore diameter, pore separation, and cortical thickness. RESULTS: We found the largest number of low-thickness and high-porosity areas in the anterior subregion. Cortical porosity, pore diameter, pore separation, and cortical thickness varied significantly among the three subregions (p < 0.001 p = 0.016, p = 0.001, p < 0.001, respectively). Cortex of the anterior subregion was more porous than that of the middle subregion (p < 0.001) and more porous and thinner than that of the posterior subregion (p < 0.001, p = 0.030, respectively). Interaction of site and sex revealed higher porosity of the anterior subregion in women (p < 0.001). The anterior subregion had larger pores than the middle subregion (p = 0.019), whereas the middle subregion had greater pore separation compared with the anterior (p = 0.002) and posterior subregions (p = 0.006). In general, compared with men, women had thinner (p < 0.001) and more porous cortex (p = 0.03) with larger cortical pores (p < 0.001). CONCLUSIONS: Due to high cortical porosity and low thickness, the anterior conoid subregion exhibits poor bone microarchitecture, particularly in women, which may be considered in clinical practice. LEVELS OF EVIDENCE: Level IV.

Recent Trends in Concomitant Distal Clavicle Excision During Rotator Cuff Repair.

The purpose of this study is to evaluate trends in distal clavicle excision (DCE) in association with arthroscopic rotator cuff repair (RCR) from 2010 to 2019. The National Surgical Quality Improvement Program database was queried to identify all patients who underwent arthroscopic RCR from January 1, 2010 to December 31, 2019, and was further subdivided into procedure type: (1) isolated RCR; and (2) RCR with arthroscopic or open DCE. The proportion of each surgery type, by year and within groups, was calculated. The Cochran-Armitage test for trend was used to analyze yearly proportions of RCR with concomitant DCE. In a sample size of 19,163 patients, the proportion of RCR with DCE decreased from 51.2% to 40.8% (r = -0.830; p = 0.003). Although the results of this study suggest that surgeons are performing fewer DCEs in the setting of RCR, many DCEs are still being done. (Journal of Surgical Orthopaedic Advances 33(2):077-079, 2024).

Effect of intramedullary fixation and plate fixation on postoperative wound complications in clavicle fractures: A meta-analysis.

More and more meta-analyses have been conducted to compare the effects of intramedullary fixation (IF) and plate fixation (PF) on the outcome of midshaft clavicle fractures. It can affect the doctors' treatment decisions. A number of studies have been conducted in order to assist surgeons in selecting optimal operative procedures and to recommend operative treatment of clavicle fractures in accordance with the best available research. Our analysis of the IF and PF of clavicle fractures was done through a search for PubMed, Emabase, Web of Science, and Cochrane Library. Two different researchers analysed the research literature for quality of analysis and data extraction. The analysis of the data was done with RevMan 5.3. The 95% CI and OR models have been computed by means of either fixed-dose or randomize. In addition, RCT in 114 references have been reviewed and added for further analysis. It is concluded that the application of plate and intramedullary fixation in the middle clavicle operation has remarkable influence on the outcome of post-operation. There was a lower risk of postoperative wound infection in IF (OR, 5.92; 95% CI, 2.46, 14.27 p < 0.0001), smaller surgical incisions (MD, 6.57; 95% CI, 4.90, 8.25 p < 0.0001), and shorter operative time (MD, 17.09; 95% CI 10.42, 23.77 p < 0.0001), less blood loss (MD, 63.62; 95% CI, 55.84, 71.39 p < 0.0001) and shorter hospital stay (MD, 1.05; 95% CI, 0.84, 1.25 p < 0.0001). However, there is no statistical significance in the incidence of wound dehiscence. Thus, the effect of IF on the incidence of injury is better than that of the inner plate in the middle of the clavicle.

Clavicular tunnel widening after acromioclavicular joint reconstruction: comparison between single and double clavicular tunnel techniques.

Acromioclavicular joint (ACJ) reconstruction using artificial ligaments is a common surgical treatment for Rockwood grade III or higher injuries. These techniques use bone tunnels in the clavicle and coracoid to insert the Tightrope implants. This multicenter retrospective study compares long term radiographic follow up of clavicular tunnel widening in two groups of patients with high-grade ACJ injury who underwent reconstruction using two different surgical techniques. The first group of 23 patients underwent an arthroscopic single clavicular tunnel ACJ reconstruction. The second group of 23 patiënts underwent an open double clavicular tunnel reconstruction. Inclusion criteria are Rockwood grade III or higher injury and minimum 18 months of follow-up. Exclusion criteria are distal clavicle fracture and additional stabilization techniques. Radiographic results were measured on anteroposterior shoulder radiographs taken at the first and last follow-up. Clavicular tunnel widening is the main outcome measurement. Secondary outcomes are heterotopic ligament calcifications, migration of buttons, tunnel fracture and loss of acromioclavicular reduction. The mean clavicular tunnel widening in the single clavicular tunnel technique is 1.91 mm. In the double clavicular tunnel technique, the widening of the medial tunnel is 2.52 mm and 3.59 mm in the lateral tunnel. The difference in widening between the single tunnel and the lateral tunnel is significant (p=0.003). A very clear observation on all follow-up X-rays was a reorientation of the clavicular tunnels towards the coracoid. The double clavicular tunnel technique has more tunnel widening in both tunnels compared to the single bundle technique.

The application of inverted lateral clavicle locking compression plate for medial clavicle fractures: biomechanical study and clinical implementation.

BACKGROUND: There has been no absolute consensus on the optimal implant for fixation of medial clavicle fracture. The purpose of the present study was to test the biomechanical efficacy of inverted lateral clavicle locking compression plate (LCP-LC) in fixation of this specific fracture location by finite element analysis. METHODS: Transverse and comminuted medial clavicle fracture simulated models stabilized by three different devices including inverted LCP-LC, superior clavicle LCP (LCP-SC), and dual reconstruction (LCP-RP) with LCP-SC were investigated biomechanical performance under three loading conditions, i.e., axial compression, inferior bending, and axial torsion. RESULTS: EQV stress exhibited on implant and elastic strain at fracture site under inferior bending was greater than other loading cases. LCP-SC construct represented the greatest EQV stress and elastic strain. The inverted LCP-LC construct demonstrated lower EQV stress than the LCP-SC construct and was comparable to dual plating. Under axial compression and axial torsion, elastic strain produced from the inverted LCP-LC construct was comparable to dual plating, but greater than dual plating when subjected to inferior bending. CONCLUSION: By the results of FE analysis, inverted LCP-LC could be a potential application for fixation of clavicle fracture with short medial fragment.

Elective implant removal in the upper extremity: only symptomatic patients benefit.

PURPOSE: Elective implant removal (IR) in the upper extremity remains controversial. Implants in the olecranon and clavicle are commonly removed for prominence, unlike in the distal radius. Patient-reported symptomatic cannot be verified, and nonspecific discomfort remains unquantified. In this study, indications and outcomes of IR at the clavicle, olecranon and distal radius were evaluated, with a focus on postoperative patient satisfaction. MATERIALS AND METHODS: In this retrospective, single-center cohort study, patients, who received elective IR of the clavicle, olecranon and distal radius were included. Patients were followed up at least six weeks after IR. Outcomes included patient satisfaction, symptom resolution, and complications. RESULTS: One hundred and eighty-nine patients were included. Unspecific symptoms of discomfort were the most prevalent indication for IR (48.7%), followed by pain (29.6%) and objective limited range of motion (ROM) (7%). Pain and limited ROM combined was observed in 13.8%. Subjective benefit following IR was described in 54%. Patients with limited ROM (OR 4.7, p < 0.001) or pain (OR 4.1, p < 0.001) were more likely to experience alleviation of complaints. Patients with unspecific symptoms of discomfort, often did not report improvement. Major complications occurred in 2%. Refractures were detected at the clavicle (3.7%) and at the olecranon (2.5%). Minor complication rate was 5%. CONCLUSION: IR is a safe procedure in the upper extremity. Indications based on unspecific symptoms of discomfort have a significant lower rate of patient satisfaction postoperatively. Elective IR should be considered cautiously, if it is driven primarily by unspecific symptoms of discomfort. Patient education is relevant to prevent dissatisfying outcome.

Optimizing hook implantation angle of the clavicular hook plate: a cadaveric study.

PURPOSE: While Clavicle hook plates have demonstrated favorable results regarding bone and shoulder function, their design can potentially lead to complications due to pressure concentration at the plate's tip. This study aims to investigate the impact of different hook implantation angles on the contact surface area between the hook plate and acromion, with the goal of minimizing mismatch and maximizing contact surface area. METHODS: Twenty soft shoulder cadavers were included in the study, and the contact surface area of the hook plate was measured in different positions based on the hook implantation angle. RESULTS: The results showed variations in compatibility, width, and length of the contact surface area depending on the hook implantation angle and the medial or lateral row placement. The lateral row generally demonstrated superior compatibility (84.0% vs 46.67%, p-value < 0.001), with a broader contact area (3.55 ± 0.08 mm vs 3.09 ± 0.10 mm, p-value = 0.004) and a longer contact area (7.36 ± 0.19 mm vs 5.10 ± 0.23 mm, p-value < 0.001) at specific angles. A detailed analysis of the lateral position revealed that the zero angle of implantation resulted in the greatest contact surface area, measuring 3.91 ± 0.70 mm in width (p value = 0.083) and 8.85 ± 1.24 mm in length (p value < 0.001). CONCLUSION: Placing the hook laterally and at the zero position according to the hook implantation angle can maximize contact surface area, may reduce stress concentration, and minimize complications in hook plate fixation. Further research and consideration of anatomical variations are warranted to refine the placement technique and enhance patient outcomes. LEVEL OF EVIDENCE: Level V evidence.

Comparison of single versus double coracoclavicular loop stabilization technique for the management of unstable distal clavicular fractures: a randomized controlled trial.

PURPOSE: The coracoclavicular (CC) loop stabilization technique is proposed for unstable distal clavicular fractures. This study aims to compare single and double CC loop stabilizations and evaluate differences in functional and radiographic outcomes between them. METHODS: We conducted a prospective randomized controlled trial involving 46 patients who sustained unstable distal clavicular fractures between April 2017 and 2019. The participants were randomly assigned to one of two groups: the single CC loop stabilization group (n = 23) or the double CC loop stabilization group (n = 23). We assessed their Constant score, American Shoulder and Elbow Surgeons score (ASES), and pain level. Additionally, we recorded data on time to union, CC distance, and any complications. RESULTS: The single CC loop group demonstrated a shorter operative time and significantly higher Constant score than the double CC loop group at 1 month (77.32 ± 5.65 vs. 71.91 ± 8.33; p = 0.016) and 3 months (86.17 ± 4.05 vs. 81.13 ± 6.34; p = 0.009) postoperatively. However, there was no differences in the ASES score, time to union or CC distance restoration between two groups. Implant irritation was observed in the double CC loop group (26.1%), but there were no cases requiring revision surgery. CONCLUSIONS: Both single and double CC loop stabilization demonstrated favorable outcomes, including a high union rate and minimal complications. Single CC loop stabilization showed slightly better early functional outcomes, reduced implant-related irritation, and shorter operative times.