Radio frequency identification (RFID) of dentures in long-term care facilities.

STATEMENT OF PROBLEM: The difficulty of identifying the ownership of lost dentures when found is a common and expensive problem in long term care facilities (LTCFs) and hospitals. PURPOSE: The purpose of this study was to evaluate the reliability of using radiofrequency identification (RFID) in the identification of dentures for LTCF residents after 3 and 6 months. MATERIAL AND METHODS: Thirty-eight residents of 2 LTCFs in Switzerland agreed to participate after providing informed consent. The tag was programmed with the family and first names of the participants and then inserted in the dentures. After placement of the tag, the information was read. A second and third assessment to review the functioning of the tag occurred at 3 and 6 months, and defective tags (if present) were reported and replaced. The data were analyzed with descriptive statistics. RESULTS: At the 3-month assessment of 34 residents (63 tags) 1 tag was unreadable and 62 tags (98.2%) were operational. At 6 months, the tags of 27 of the enrolled residents (50 tags) were available for review. No examined tag was defective at this time period. CONCLUSIONS: Within the limits of this study (number of patients, 6-month time span) RFID appears to be a reliable method of tracking and identifying dentures, with only 1 of 65 devices being unreadable at 3 months and 100% of 50 initially placed tags being readable at the end of the trial.

Perceptions and preferences on denture marking in an Indian sample.

AIM: Denture marking is useful in institutional settings and post-mortem identification. Numerous markers have been developed, and their advantages and limitations assessed previously; however, patient perception to denture marking is paramount. We evaluated this in an Indian sample and also gauged their preference for different markers. MATERIALS AND METHODS: One-hundred and one edentulous patients seeking prosthodontic treatment in our institution were shown four denture markers (stainless steel matrix band, paper strip with name inscribed on it, patient photograph and optically readable laminated bar code) and asked whether they wanted similar markers in their dentures; patients were also asked to rank the markers based on preference and indicate their satisfaction with it. RESULTS: Approximately two-thirds of patients (65/101) were uninterested in getting their dentures marked; among the 36 who agreed, 10 preferred the stainless steel band followed by photographs (9), paper strip (6) and bar code (2); nine gave multiple responses and were excluded from analyses. Sixteen patients expressed dissatisfaction with the photographic marker and bar code, while this number reduced for the stainless steel band (13) and paper strip (10). CONCLUSIONS: The results are in contrast to European studies wherein the majority of patients agreed to denture marking, indicating patient background (e.g. education level) may affect perception to denture marking; amongst those who agreed to marking, most preferred, or were satisfied with, the stainless steel and paper strip markers over photographic marker and a complex method such as bar-coding, implying that simple methods harbouring basic patient information may suffice in the Indian context.

Usefulness of patient photograph as a marker for identifying denture-wearers in India.

AIM: Denture marking has been recommended for identifying the edentulous, both in day-to-day recognition when dentures are misplaced as well as in forensic scenarios. The purpose of this study was to test the use of patient photographs as a denture marker and to compare it with conventional marking systems as well as discussing its suitability in the Indian context. MATERIAL AND METHODS: A photograph of the patient was taken and compared with a metal matrix band and optically readable laminated bar code in terms of preparation, ease of incorporation into the denture, readability following denture fabrication and changes on exposure to high temperatures (200-1300 °C). RESULTS: The photograph and metal matrix band were easy to prepare and incorporate, but the bar code was less so; no differences, however, were appreciable with regard to readability of the three markers. Fire resistance of the photographic marker (280 °C) and bar code (200 °C) was considerably lower to that of the metal marker (1050 °C). CONCLUSIONS: The major advantage of the photographic marker is that identity is easily ascertained by lay persons with the unassisted eye (bar codes require a hand-held reading device); photographic markers are also relevant in the Indian context where one-third of the population is illiterate and diverse scripts are used across the country, making interpretation of written data challenging at times. This allows for photographic markers' routine use in residential and hospital set-ups. Although the photographic marker has low fire resistance, it may be useful in forensic contexts since dentures retained in the mouth are well-protected by the oro-facial tissues and may survive incineration.

Attitudes, Perceptions, and Preferences of Individuals from Temuco (Chile) About Denture Marking.

Denture marking (DM) helps identify edentulous people with different methods. Analyzing perceptions and attitudes of denture wearers would enable understanding of the practical aspects, an analysis still absent in South America. Fifty-three individual candidates for removable dentures were instructed on disaster victim identification (DVI) and the usefulness of DM for this purpose. They were physically shown eight DM systems and a questionnaire to which they responded by highlighting preferences in those systems. Although 98.11% did not know that dentures could be marked, only 9.43% denied interest in some type of DM. The 90.57% would mark their dentures with some system, preferring the inclusion of QR codes or a micro SIM card. The proven weaknesses of DVI and propensity for disaster mean this community in Chile is an opportunity to implement DM systems. Obstacles may come not from patients but from their dentists, educational institutions, or a lack of public policies.

A new method for denture identification.

Three denture marking methods were performed on specimen plates which were prepared using a heat-cured acrylic resin. The first method (LA) was to place a label into a suitable space on the specimen, and then cover it with autopolymerizing acrylic resin. The second method (DA) was to print the mark directly on the specimen, and then cover it with autopolymerizing acrylic resin. The third method (DB) was to print the mark directly on the specimen, and then cover it with bonding resin. To investigate the durability of these methods, specimens were immersed in NaOCl, denture cleanser, and coffee. Photographs of the specimens were taken and RGB values were measured. Differences in durability were analyzed by Friedman test. The RGB values were significantly different between LA and DB, but those of DA changed little. The results made it clear that DA was a more durable denture marking method than LA--which is a method generally used.

Percepción de la utilidad de los registros dentales como método de identificación humana en profesiones de alto riesgo: el caso de las personas trabajadoras de la Cruz Roja Costarricense / Perception of the usefulness of dental records as a method of human identification in high-risk professions: the case of the Costa Rican Red Cross workers

Introducción: Aquellas personas que brindan atención en situaciones de emergencias están expuestas a un alto riesgo de sufrir lesiones o fallecer durante labores de rescate, sea en accidentes de tránsito, desastres naturales, atentados terroristas o crisis humanitarias generadas por conflictos armados. Esta investigación fue realizada en las personas trabajadoras de la Cruz Roja Costarricense (CRC) para establecer la percepción de la utilidad de los registros dentales como método de identificación y elaborar un formato único de información odontológica antemortem. Materiales y métodos: Un cuestionario piloto fue diseñado y aplicado a 10 personas para ser calibrado y validado. Posteriormente se generó un cuestionario electrónico final en la plataforma Google Forms que fue enviado vía correo electrónico institucional a las personas trabajadoras constituida por 175 individuos, de los cuales 92 respondieron en el período del 20 de noviembre de 2022 al 20 de enero de 2023. Los resultados fueron analizados mediante las distribuciones de frecuencia, cruce de variables, comparación de medias con base en el análisis de variancia. El nivel mínimo de confianza para las comparaciones fue del 95%. Resultados: El cuestionario fue realizado por 92 personas, 75% hombres y 25% mujeres. El rango de edad entre los 36 y 40 años fue el más frecuente (23.9%). El 60,9% labora en la provincia de San José, 58% indica que visitaron al odontólogo hace un año o menos y el 38,6% refiere que nunca les han tomado una radiografía panorámica, un 81,8% dice tener tratamientos dentales como coronas, puentes o implantes; y el 75% considera de gran utilidad los registros dentales como método de identificación, y lo ubican en segundo lugar de conocimiento (89,8%) al compararlo con ADN (97,7%) y dactiloscopia (86,4%). Conclusiones: Las personas trabajadoras de la Cruz Roja Costarricense consideran que los registros odontológicos son útiles en la identificación de seres humanos y cuentan con información antemortem útil para dicho efecto.

Introduction: Those who provide care in emergency situations are exposed to a high risk of injury or death during rescue work, whether in traffic accidents, natural disasters, terrorist attacks, or humanitarian crises generated by armed conflicts. This research was carried out among Costa Rican Red Cross (CRC) workers to establish the perception of the usefulness of dental records as a method of identification and to develop a single format for antemortem dental information. Materials and methods: A pilot questionnaire was designed and applied to 10 persons to be calibrated and validated. Subsequently, a final electronic questionnaire was generated in the Google Forms platform and sent via institutional e-mail to 175 workers, of whom 92 responded during the period from November 20, 2022, to January 20, 2023. The results were analyzed by means of frequency distributions, crossing of variables, and comparison of means based on the analysis of variance. The minimum confidence level for comparisons was 95%. Results: The questionnaire was completed by 92 people, 75% men and 25% women. The age range between 36 and 40 years was the most frequent (23.9%). A total of 60.9% worked in the province of San José, 58% indicated that they had visited the dentist a year ago or less and 38.6% said that they had never had a panoramic X-ray taken, 81.8% said they had dental treatments such as crowns, bridges or implants; and 75% considered dental records to be very useful as a method of identification, and placed it in second place in terms of knowledge (89.8%) when compared with DNA (97.7%) and dactyloscopy (86.4%). Conclusions: Costa Rican Red Cross workers consider dental records to be useful in the identification of human beings and have useful antemortem information for this purpose.

Resistencia estructural de prótesis dentales acrílicas y de cromo cobalto en cadáveres quemados o carbonizados: a propósito de dos casos / Structural resistance of acrylic and cobalt-chromium dental prostheses in burned or charred corpses: a propos of two cases

La identificación humana genera continuos desafíos técnicos y científicos para los equipos de expertos forenses en sus múltiples contextos de intervención. Uno de los más complejos, está representado por el hallazgo de cadáveres quemados o carbonizados, donde las huellas dactilares resultan inviables. En tales situaciones, los tejidos de la cavidad oral han demostrado elevada tolerancia a la injuria térmica, aportando información decisiva, muchas veces com-plementada por estructuras protésicas recupera-das del occiso. El presente artículo reporta dos ca-sos donde las prótesis dentales acrílicas y de cromo cobalto exhibieron notable indemnidad pese a la gran pérdida orgánica sufrida por los cuerpos de las víc-timas ante la acción vulnerante del fuego, otorgando valor probatorio para contribuir en el establecimien-to de su identidad (AU)

Human identification generates continuous technical and scientific challenges for teams of forensic experts in their multiple contexts of intervention. One of the most complex is represented by the discovery of burned or charred corpses, where fingerprints are unviable. In such situations, the tissues of the oral cavity have shown high tolerance to thermal injury, providing decisive information, often complemented by prosthetic structures recovered from the deceased. This article reports two cases where the acrylic and cobalt chrome dental prostheses presented notable indemnity despite the great organic loss suffered by the bodies of the victims before the damaging action of fire, granting probative value to contribute to the establishment of their identity (AU)

Denture marking--patient preference of various methods.

Dental forensic organizations world wide have recommended that dental prostheses should be labeled with at least the patient's (wearer's) name and preferably with further unique identifiers such as social security number. A range of methods are available and the purpose of this study was to determine, via the means of a visual questionnaire, which are the most preferable to those patients who wear complete dentures. One hundred edentulous patients attending the Manchester Dental Hospital were shown a range of denture labeling methods and asked to rank these according to their preference. The most preferred method was that of an embedded radio frequency identification microchip (38% rated this as first) and the second was an inclusion technique using onion paper (24% rated this as first). The least preferred method was the use of a groove cut into the denture flange with 71% of patients rating this as the poorest in terms of esthetics. The study demonstrates that the method of denture labeling is important to patients and to ensure that denture labeling is performed routinely esthetic preferences must be considered.

International telephone code used for citizenship identification in a denture.

This case report describes a simple method for identifying the citizenship of a denture wearer by marking the telephone country code number inside the denture base. A wax pattern for the denture framework was prepared on the refractory cast. A piece of embossing tape, containing the country code (81, Japan), Japanese prefectural code, and abbreviation of the dental clinic where the denture was fabricated, was placed on the metal framework. A titanium-aluminum-niobium (Ti-6Al-7Nb) alloy was cast in the mold, and the denture was then fabricated by the conventional method. The casting satisfactorily reproduced the embossed letters, and the plate was identifiable through the gingiva-colored acrylic denture base resin. Since an embossed metal plate integrated with the skeleton is embedded in the denture base resin material, the current denture marking technique serves as a simple procedure for insertion of an undegradable denture identification mark which makes it possible to identify the nationality of the denture wearer.

Contemporary methods of labeling dental prostheses--a review of the literature.

Forensic identification (ID) based on an assessment of the dentition is commonplace. However, despite an increase in the oral health of Western populations, there are still many millions of individuals who are edentulous and whom have been treated with completed dentures. In the United Kingdom alone over 300,000 patients are rendered edentulous each year. In order to facilitate the ID of such individuals a number of forensic and governmental organizations have recommended that dentures be labeled. A number of labeling systems exist which can be broadly separated into inclusion systems, marking systems, and novel methods. Each of the commonly described systems are demonstrated with an assessment of their strengths and weaknesses. It is recommended that an inclusion denture marker, preferably metallic, should be used in order to withstand the most common postmortem assaults.

Femtosecond pulse laser-oriented recording on dental prostheses: a trial introduction.

The purpose of this study was to evaluate the feasibility of using a femtosecond pulse laser processing technique to store information on a dental prosthesis. Commercially pure titanium plates were processed by a femtosecond pulse laser system. The processed surface structure was observed with a reflective illumination microscope, scanning electron microscope, and atomic force microscope. Processed area was an almost conical pit with a clear boundary. When laser pulse energy was 2 microJ, the diameter and depth were approximately 10microm and 0.2 microm respectively--whereby both increased with laser pulse energy. Further, depth of pit increased with laser pulse number without any thermal effect. This study showed that the femtosecond pulse processing system was capable of recording personal identification and optional additional information on a dental prosthesis.

Denture marking.

Reluctance about the identification marking of dentures has been the result of high costs and technical marking problems. The ID band system described here is inexpensive, fast, and requires no expensive special equipment. Embedding the band in a suitable part of the denture provides fully legible, radiopaque, lasting evidence of the denture wearer's identity. Since 1981, all dentures made in Sweden have been legally required to be marked.

Automatic identification of dental appliances.

AIM: To develop a reliable, machine-readable coding system for dental appliances. METHODS: Incorporation of two-dimensional bar codes and matrix codes into a range of dental appliances using printed thermal substrates and laser-etched ceramic discs. RESULTS: Problems including reaction of thermal substrates with methyl methacrylate monomer, loss of code clarity, limited areas available for bar codes, difficulty in scanning opaque pigmented acrylic resin and palatal and lingual surfaces were overcome using 4 mm2 data matrix codes etched onto ceramic discs. CONCLUSIONS: Reliable automatic identification of dental appliances was achieved using laser-etched matrix codes. Further development is necessary in relation to optimisation of code size, encryption, scanners and maintenance of code readability over time.

A new method of marking dentures using microchips.

Over the years various methods of denture marking have been reported in the literature. They include surface marking and inclusion techniques using metallic or non-metallic materials, microchips and microlabels. The microchips are preferred because of their small size and aesthetic acceptability. They are not however widely used due to the high cost of manufacture and data incorporation. This article details the procedures involved in inscribing a microchip using the photochemical etching process used in the electronics industry. The resulting microchip was cosmetically appealing, cost effective and was able to satisfy all the forensic requirements for a suitable denture marker.

An inclusion technique for marking dentures.

The importance of placing identification markers in dentures is well documented and this paper describes a simple and inexpensive technique for doing it. Twenty marked upper acrylic simulated dentures and 20 controls (unlabelled) were constructed in a standardized mould. Clear laminated labels were produced in a P-touch 300 electronic lettering system and contained both the patient's identification number and suffix ZA (international code for South Africa). The markings were both clear and aesthetically acceptable. Strength tests were carried out to establish the effect of the mark with the result that no significant difference (p70.05) was demonstrated. The routine marking of all dentures by this method is advocated.

Copper vapour laser ID labelling on metal dentures and restorations.

Denture marking is accepted as a means of identifying dentures and persons in geriatric institutions, or post-mortem during war, crimes, civil unrest, natural and mass disasters. Labelling on the acrylic resin component of the denture can easily be damaged or destroyed by fire but on cobalt-chromium components it would be more resistant. A copper vapour laser (CVL) can be used to label the cobalt-chromium components of dentures and metal restorations easily, and legibly, and miniaturised for the incorporation of more personal particulars necessary for the identification of the deceased person. The CVL beam is focussed by its optics and delivered to the material surface by the two-axis scanner mounted with mirrors. A personal computer controls the movement of the scanner and the firing of the CVL. The high peak power of the pulsed CVL is focussed to very high energy density producing plasma ablation of the alloy surface. Very fine markings of a few microns width can be produced enabling the storage of detailed information of the deceased person on a metal surface for the purpose of rapid identification.

On denture marking.

During the last decades in Sweden dentures have been permanently marked with a stainless steel metal band incorporated into the acrylic and containing the patient's birth date, a special number, and "S" for Sweden. The last recommendation issued by the National Board of Health and Welfare states that "the patients shall always be offered denture marking and be informed about the benefit thereof. Denture marking is not permitted if the patient refuses it". Requirements for denture markers have been that they should be biologically inert (when incorporated into the denture), not be expensive, be easy to inscribe, be possible to retrieve after an accident, and survive elevated temperatures for a reasonable time under normal circumstances. Although the frequency of edentulousness has decreased in recent years due to the improvement in oral health there remains a need to address the issue of marking of complete dentures, because there is a large variation in the oral status of populations in different countries. Given that only one marked denture can reveal the identity of a deceased person when all other methods fail to do so, makes it worthwhile. Furthermore, denture marking is important in long-term care facilities. We have investigated the issue of denture marking in Europe and in the United States. The results from the European survey show that denture marking is, to our knowledge regulated by law only in Sweden and Iceland. In the US denture marking is so far mandatory in 21 states while New York State requires dentures to be marked if the patient requests it and several other states impose the obligation to mark dentures on long-term care facilities. Since there is no international consensus regarding the issue of denture marking it is important to address it. A survey from the Nordic countries has shown that if denture marking was in general use, the contribution to the establishment of identity by forensic odontology in cases of fire would increase by about 10%. This means that about 25 more individuals could have been identified if their dentures were marked. Increased international collaboration is needed to solve the issue of denture marking for clinical and forensic purposes.

Forensic aspects of community dentistry.

Community Dentistry has developed as the dental profession's response to a social conscience, recognising the individual social and health needs and personal rights of each member of the community. In this context, forensic odontology is seen as providing that body of dental expertise necessary for the fulfillment of a number of social functions required by law, in both the civil and criminal arenas, with particular reference to the scientific identification of the dead, the investigation of bitemarks, the estimation of age and dental traumatology. The important role of dental records in these matters emphasises the social responsibility of each dentist to exercise great care in the documentation of his treatment procedures. This obligation also extends to the identification marking of dentures. The need for legislation in this area is discussed and the social responsibility of dental educators to include forensic odontology in the curricula of all dental schools, particularly in developing countries, is stressed. Research in forensic odontology should take into account the particular needs of each community in the light of their geographical, social and cultural backgrounds.

An assessment of attitudes to, and extent of, the practice of denture marking in South Australia.

Denture marking or labelling is not a new concept in either prosthetic or forensic dentistry and its routine practice has been urged by forensic odontologists internationally for many years. In the general community it is often recommended for institutionalized persons to prevent confusion of ownership of dentures. In Australia, the Nursing Home Standards require that dentures of residents be 'discreetly labelled' and marking of all dentures is recommended by the Australian Dental Association. In some countries the marking of dentures is regulated by legislation, but elsewhere there seems to be a reluctance to effect this practice. Various methods which have been proposed include the insertion of an identifying label during the fabrication of the dentures with the utilization of a number of materials and coding systems. This study reports the results of a survey undertaken to determine the extent of the practice of denture marking in South Australia, the methods in use, and the attitudes of dentists, dental technicians and institutions to it. The results indicated that 24.5 per cent of all practitioners providing removable prostheses to their patients include an identifying label as part of the service on some occasions. This included 19.9 per cent of general dental practitioners, 25 per cent of specialist prosthodontists, 57.1 per cent of practitioners with training in forensic odontology, and 43.5 per cent of clinical dental technicians. No practitioner labelled dentures routinely. Reasons cited for not labelling dentures included cost, lack of awareness of standards and recommendations and a belief that it was of little importance.