Facile Preconcentration of Cell-Free DNA in Human Plasma by Ion-Specific Poly Ionic Sorbents Featuring an Anion Exchange Mechanism.

The expanding horizon of diagnostic and therapeutic applications involving nucleic acids (NA) requires novel tools for purification, including minimal sample preparation. In this work, thin-film microextraction devices featuring five poly ionic sorbents were examined as anion exchange extraction phases for the rapid purification of NAs. Each sorbent is composed of a nonionic cross-linker and a methacrylate monomer containing a core tetra-alkyl ammonium moiety with an alkyl, anionic, or cationic residue. Extraction devices were produced through the application of the prepolymer sorbent mixture onto a functionalized nitinol metal support followed by photoinduced free-radical polymerization. The miniaturized extraction devices (10 mm × 3.5 mm) were directly immersed into aqueous samples to isolate NAs via electrostatic interactions with the polycation. The ammonium methacrylate (AMA) monomer containing a propyl trimethylammonium group (AMA-C3N(CH3)3) exhibited the highest affinity for DNA, with 80 ± 10% of DNA being isolated. Recovery of DNA from the sorbents required the introduction of ions in an aqueous solution to exchange the anionic biopolymer from the polycationic moiety. An investigation of three anion species revealed that the AMA-C3N(CH3)3 sorbent showed the highest recoveries, with the perchlorate anion producing a preconcentration factor of 4.36 ± 0.86 while requiring only 250 mM NaClO4. A directly compatible quantitative polymerase chain reaction assay was developed to quantify the recovery of spiked DNA with lengths of 830, 204, and 98 base pairs in heat-treated human plasma. The AMA-C3N(CH3)3 sorbent was uninhibited by the complex human plasma matrix and enabled high preconcentration factors for the spiked DNA at a biologically relevant concentration of 10 pg/mL. While Qiagen's circulating cell-free DNA MinElute extraction kit enabled higher preconcentration of all analytes, the methodology described in this work requires fewer steps, less user intervention, and minimal equipment requirements to isolate DNA, making it more amenable for high-throughput and low resource applications.

Site-directed mutagenesis at the Glu78 in Ec-NhaA transporter impacting ion exchange: a biophysical study.

Na+/H+ antiporters facilitate the exchange of Na+ for H+ across the cytoplasmic membrane in prokaryotic and eukaryotic cells. These transporters are crucial to maintain the homeostasis of sodium ions, consequently pH, and volume of the cells. Therefore, sodium/proton antiporters are considered promising therapeutic targets in humans. The Na+/H+ antiporter in Escherichia coli (Ec-NhaA), a prototype of cation-proton antiporter (CPA) family, transports two protons and one sodium (or Li+) in opposite direction. Previous mutagenesis experiments on Ec-NhaA have proposed Asp164, Asp163, and Asp133 amino acids with the significant implication in functional and structural integrity and create site for ion-binding. However, the mechanism and the sites for the binding of the two protons remain unknown and controversial which could be critical for pH regulation. In this study, we have explored the role of Glu78 in the regulation of pH by Ec-NhaA. Although we have created various mutants, E78C has shown a considerable effect on the stoichiometry of NhaA and presented comparable phenotypes. The ITC experiment has shown the binding of ~ 5 protons in response to the transport of one lithium ion. The phenotype analysis on selective medium showed a significant expression compared to WT Ec-NhaA. This represents the importance of Glu78 in transporting the H+ across the membrane where a single mutation with Cys amino acid alters the number of H+ significantly maintaining the activity of the protein.

Mobility of Condensed Counterions in Ion-Exchange Membranes: Application of Screening Length Scaling Relationship in Highly Charged Environments.

Ion-exchange membranes (IEMs) are widely used in water, energy, and environmental applications, but transport models to accurately simulate ion permeation are currently lacking. This study presents a theoretical framework to predict ionic conductivity of IEMs by introducing an analytical model for condensed counterion mobility to the Donnan-Manning model. Modeling of condensed counterion mobility is enabled by the novel utilization of a scaling relationship to describe screening lengths in the densely charged IEM matrices, which overcame the obstacle of traditional electrolyte chemistry theories breaking down at very high ionic strength environments. Ionic conductivities of commercial IEMs were experimentally characterized in different electrolyte solutions containing a range of mono-, di-, and trivalent counterions. Because the current Donnan-Manning model neglects the mobility of condensed counterions, it is inadequate for modeling ion transport and significantly underestimated membrane conductivities (by up to ≈5× difference between observed and modeled values). Using the new model to account for condensed counterion mobilities substantially improved the accuracy of predicting IEM conductivities in monovalent counterions (to as small as within 7% of experimental values), without any adjustable parameters. Further adjusting the power law exponent of the screen length scaling relationship yielded reasonable precision for membrane conductivities in multivalent counterions. Analysis reveals that counterions are significantly more mobile in the condensed phase than in the uncondensed phase because electrostatic interactions accelerate condensed counterions but retard uncondensed counterions. Condensed counterions still have lower mobilities than ions in bulk solutions due to impedance from spatial effects. The transport framework presented here can model ion migration a priori with adequate accuracy. The findings provide insights into the underlying phenomena governing ion transport in IEMs to facilitate the rational development of more selective membranes.

Open-Framework Vanadate as Efficient Ion Exchanger for Uranyl Removal.

The elimination of uranium from radioactive wastewater is crucial for the safe management and operation of environmental remediation. Here, we present a layered vanadate with high acid/base stability, [Me2NH2]V3O7, as an excellent ion exchanger capturing uranyl from highly complex aqueous solutions. The material possesses an indirect band gap, ferromagnetic characteristic and a flower-like morphology comprising parallel nanosheets. The layered structure of [Me2NH2]V3O7 is predominantly upheld by the H-bond interaction between anionic framework [V3O7]nn- and intercalated [Me2NH2]+. The [Me2NH2]+ within [Me2NH2]V3O7 can be readily exchanged with UO22+. [Me2NH2]V3O7 exhibits high exchange capacity (qm = 176.19 mg/g), fast kinetics (within 15 min), high removal efficiencies (>99%), and good selectivity against an excess of interfering ions. It also displays activity for UO22+ ion exchange over a wide pH range (2.00-7.12). More importantly, [Me2NH2]V3O7 has the capability to effectively remove low-concentration uranium, yielding a residual U concentration of 13 ppb, which falls below the EPA-defined acceptable limit of 30 ppb in typical drinking water. [Me2NH2]V3O7 can also efficiently separate UO22+ from Cs+ or Sr2+ achieving the highest separation factors (SFU/Cs of 589 and SFU/Sr of 227) to date. The BOMD and DFT calculations reveal that the driving force of ion exchange is dominated by the interaction between UO22+ and [V3O7]nn-, whereas the ion exchange rate is influenced by the mobility of UO22+ and [Me2NH2]+. Our experimental findings indicate that [Me2NH2]V3O7 can be considered as a promising uranium scavenger for environmental remediation. Additionally, the simulation results provide valuable mechanistic interpretations for ion exchange and serve as a reference for designing novel ion exchangers.

Novel Fluorinated Anion Exchange Membranes Based on Poly(Pentafluorophenyl-Carbazole) with High Ionic Conductivity and Alkaline Stability for Fuel Cell Applications.

Constructing good microphase separation structures by designing different polymer backbones and ion-conducting groups is an effective strategy for improving the ionic conductivity and chemical stability of anion exchange membranes (AEMs). In this study, a series of AEMs based on the poly(pentafluorophenylcarbazole) backbone grafted with different cationic groups are designed and prepared to construct well-defined microphase separation morphology and improve the trade-off between the properties of AEMs. Highly hydrophobic fluorinated backbone and alkyl spaces enhance phase separation and construct interconnected hydrophilic channels for anion transport. The ionic conductivity of the PC-PF-QA membrane is 123 mS cm-1 at 80 °C, and the ionic conductivity of the PC-PF-QA membrane decreased by only 6% after 960 h of immersion at 60 °C in 1 M NaOH aqueous solution. The maximum peak power density of the single cell based on PC-PF-QA is 214 mW cm-2 at 60 °C.

A simple method to prepare anion exchange membrane by PVA/EVOH/MIDA for acid recovery by diffusion dialysis.

Given the substantial environmental pollution from industrial expansion, environmental protection has become particularly important. Nowadays, anion exchange membranes (AEMs) are widely used in wastewater treatment. With the use of polyvinyl alcohol (PVA), ethylene-vinyl alcohol (EVOH) copolymer, and methyl iminodiacetic acid (MIDA), a series of cross-linked AEMs were successfully prepared using the solvent casting technique, and the network structure was formed in the membranes due to the cross-linking reaction between PVA/EVOH and MIDA. Fourier transform infrared spectrometer, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to analyze the prepared membranes. At the same time, its comprehensive properties which include water uptake, linear expansion rate, ion exchange capacity, thermal stability, chemical stability, and mechanical stability were thoroughly researched. In addition, diffusion dialysis performance in practical applications was also studied in detail. The acid dialysis coefficient (UH+) ranged from 10.2 to 35.6 × 10-3 m/h. Separation factor (S) value ranged from 25 to 38, which were all larger than that of the commercial membrane DF-120 (UH+: 8.5 × 10-3 m/h, S: 18.5). The prepared membranes had potential application value in acid recovery.

Combination of size-exclusion chromatography and ion exchange adsorption for improving the proteomic analysis of plasma-derived extracellular vesicles.

Extracellular vesicles (EVs) are lipid membrane vesicles released by live cells that carry a variety of biomolecules, including nucleic acids, lipids, and proteins. Recently, proteins in plasma-derived EVs have emerged as novel biomarkers with essential functions in the diagnosis and prognosis of human diseases. However, the current methods of isolating EVs from plasma often lead to coisolated impurities in biological fluids. Therefore, before performing any research protocol, the process of extracting EVs from plasma for proteomic analysis must be optimized. In this study, two EV isolation strategies, size exclusion chromatography (SEC) and SEC combined with ion exchange adsorption (SEC + IEA), were compared in terms of the purity and quantity of protein in EVs. Our results demonstrated that, compared to single-step SEC, SEC combined with IEA could produce plasma-derived EVs with a higher purity by decreasing the abundance of lipoprotein. Additionally, with MS analysis, we demonstrated that the combination approach maintained the stability and improved the purity of EVs in many plasma samples. Furthermore, by combining SEC with IEA, more cancer-associated proteins were detected in the plasma of various cancer samples.

Disentangling water, ion and polymer dynamics in an anion exchange membrane.

Semipermeable polymeric anion exchange membranes are essential for separation, filtration and energy conversion technologies including reverse electrodialysis systems that produce energy from salinity gradients, fuel cells to generate electrical power from the electrochemical reaction between hydrogen and oxygen, and water electrolyser systems that provide H2 fuel. Anion exchange membrane fuel cells and anion exchange membrane water electrolysers rely on the membrane to transport OH- ions between the cathode and anode in a process that involves cooperative interactions with H2O molecules and polymer dynamics. Understanding and controlling the interactions between the relaxation and diffusional processes pose a main scientific and critical membrane design challenge. Here quasi-elastic neutron scattering is applied over a wide range of timescales (100-103 ps) to disentangle the water, polymer relaxation and OH- diffusional dynamics in commercially available anion exchange membranes (Fumatech FAD-55) designed for selective anion transport across different technology platforms, using the concept of serial decoupling of relaxation and diffusional processes to analyse the data. Preliminary data are also reported for a laboratory-prepared anion exchange membrane especially designed for fuel cell applications.

A multifunctional electrochemiluminescence and photoelectrochemical biosensor based on a quantum dot ion-exchange reaction for two-channel detection of thrombin.

Herein, a multifunctional electrochemiluminescence (ECL) and photoelectrochemical (PEC) biosensor based on exchange of Ag+ with CdTe QDs was developed for dual-mode detection of thrombin. First, CdTe QDs assembled on an electrode displayed superior ECL and PEC signals. At the same time, C-rich hairpin (HP) DNA linked to silicon spheres loaded a large amount of Ag+, and the specific binding of thrombin to an aptamer led to the release of DNA P; then, DNA P interacted with HP DNA to produce numerous Ag+ ions by an enzyme-digestion amplification reaction. Ag+ underwent ion exchange with CdTe QDs to generate AgTe/CdTe QDs, resulting in much reversed PEC and changed ECL signals for dual-mode detection of thrombin. This work takes advantage of outstanding multi-signals of QDs coupled with convenient ion exchange to achieve multi-mode detection of the target, avoiding false positive or false negative signals generated in the traditional detection process, and thus can be used for the rapid detection of various biomolecules in actual samples.

Embedded Mo/Mn Atomic Regulation for Durable Acidity-Reinforced HZSM-5 Catalyst toward Energy-Efficient Amine Regeneration.

Metal-molecular sieve composites with high acidity are promising solid acid catalysts (SACs) for accelerating sluggish CO2 desorption processes and reducing the energy consumption of CO2 chemisorption systems. However, the production of such SACs through conventional approaches such as loading or ion-exchange methods often leads to uncontrolled and unstable metal distribution on the catalysts, which limits their pore structure regulation and catalytic performance. In this study, we demonstrated a feasible strategy for improving the durability, surface chemical activity, and pore structure of metal-doped HZSM-5 through bimetallic Mo/Mn modification. This strategy involves the immobilization of Mo-O-Mn species confined in an MFI structure by regulating MoO42- anions and Mn2+ cations. The embedded Mn/Mo species of low valence can strongly induce electron transfer and increase the density of compensatory H+ on the MoMn@H catalyst, thereby reducing the CO2 desorption temperature by 8.27 °C and energy consumption by 37% in comparison to a blank. The durability enhancement and activity regulation method used in this study is expected to advance the rational synthesis of metal-molecular sieve composites for energy-efficient CO2 capture using amine regeneration technology.

High-capacity/high-rate hybrid column for high-performance ion exchange.

Herein, a fixed-bed high-capacity/high-rate (HC/HR) hybrid column was developed using commercial ion-exchange beads (IEBs) and ion-exchange fibers (IEFs). The as-fabricated HC/HR hybrid column exhibited excellent breakthrough bed volume (BV) and utilization efficiency of capacity (UEC) at a high service flow rate (SFR) for the adsorption of Cd(II). The IEBs displayed a high adsorption capacity of 235.2 ± 9.8 mg g-1 and slow adsorption kinetics (k2 = 0.0001 g mg-1 min-1) for the sorption of Cd(II); meanwhile, the IEFs showed a maximum adsorption capacity of only 146.3 ± 7.5 mg g-1, which is lower than that of the IEBs, but fast kinetics (k2 = 0.0130 g mg-1 min-1). At an SFR of 104.23 BV h-1, the HC/HR hybrid column showed excellent performance for the sorption of Cd(II), having a high breakthrough BV of 1009.11 and a UEC of 92.86%; these values are much higher than those of the IEB-packed column. Furthermore, at an increased SFR (318.47 BV h-1), the HC/HR hybrid column maintained its high performance, demonstrating a breakthrough BV of 568.80 and UEC of 83.90%. The regeneration experiment indicates that 97% of the initial capacity was retained. Thus, the HC/HR hybrid column could easily be applied to existing column systems and shows promising performance in ion-exchange processes.

Residue analysis of 10 aminoglycoside antibiotics in aquatic products by multiwalled carbon nanotubes combined with mixed-mode ion exchange liquid chromatography-tandem mass spectrometry.

An ultra-high-performance liquid chromatography-tandem mass spectrometry method was developed for simultaneous determination of 10 kinds of aminoglycosides in edible parts of aquatic products. The samples were extracted with 10 mmol/L potassium dihydrogen phosphate buffer solution, then the pH value of the extract was adjusted to neutral by sodium hydroxide. Half volume of the extract was loaded onto multiwalled carbon nanotubes cartridge. All the target compounds were separated on a mixed-mode ion exchange column and detected by ultra-high-performance liquid chromatography-tandem mass spectrometry with electrospray in the positive ionization mode. Under optimized conditions, this method had a good linearity with a squared correlation coefficient > 0.999. For neomycin, the limit of detection and limit of quantification were 5.0 µg/kg and 10.0 µg/kg, respectively; for hygromycin B and apramycin, values were 2.0 µg/kg and 5.0 µg/kg, respectively; for the other seven kinds of aminoglycosides, values were 1.0 µg/kg and 2.0 µg/kg, respectively. The average recoveries presented 75.8%-107.2% with intra- and interday reproducibility ranging between 3.8% and 12.5%. The method was rapid with good separation and sharp peak shapes, had the characteristicsis of high accuracy and good precision, and was suitable for simultaneous determination of 10 kinds of aminoglycosides in aquatic products.

Carboxylate-Modified Magnetic Bead (CMMB)-Based Isopropanol Gradient Peptide Fractionation (CIF) Enables Rapid and Robust Off-Line Peptide Mixture Fractionation in Bottom-Up Proteomics.

Deep proteome coverage in bottom-up proteomics requires peptide-level fractionation to simplify the complex peptide mixture before analysis by tandem mass spectrometry. By decreasing the number of coeluting precursor peptide ions, fractionation effectively reduces the complexity of the sample leading to higher sample coverage and reduced bias toward high-abundance precursors that are preferentially identified in data-dependent acquisition strategies. To achieve this goal, we report a bead-based off-line peptide fractionation method termed CIF or carboxylate-modified magnetic bead-based isopropanol gradient peptide fractionation. CIF is an extension of the SP3 (single-pot solid phase-enhanced sample preparation) strategy and provides an effective but complementary approach to other commonly used fractionation methods including strong cation exchange and reversed phase-based chromatography. We demonstrate that CIF is an effective offline separation strategy capable of increasing the depth of peptide analyte coverage both when used alone or as a second dimension of peptide fractionation in conjunction with high pH reversed phase. These features make it ideally suited for a wide range of proteomic applications including the affinity purification of low-abundance bait proteins.

Influence of Ion Exchange Process Parameters on Broadband Differential Interference.

The paper presents theoretical analyses and experimental investigations of broadband differential interference in planar gradient waveguides made via K+-Na+ ion exchange in BK-7 glass. This technology, due to its large polarimetric dispersion, is especially useful for applications in differential interferometry. We discuss the influence of technological parameters on the operation characteristics of the structure in terms of sensor applications. The refractive index variation in the measured external surroundings affects the modal properties of TE and TM modes and the spectral distribution at the output of the differential interferometer. The optical system described in this work has been designed specifically for use in biological systems where variations in the index of refraction need to be measured.

N-N(+) Bond-Forming Intramolecular Cyclization of O-Tosyloxy ß-Aminopropioamidoximes and Ion Exchange Reaction for the Synthesis of 2-Aminospiropyrazolilammonium Chlorides and Hexafluorophosphates.

Our research area is related to the spiropyrazolinium-containingcompounds, which are insufficiently studied compared with pyrazoline-containing compounds. Nitrogen-containing azoniaspiromolecules have also been well studied. In drug design and other areas, they are a priori important structures, since rigid spirocyclic scaffolds with the reduced conformational entropy are able to organize a closely spaced area. Azoniaspirostructures are currently of wide practical interest as ionic liquids, current sources (membranes), structure-directing agents in organocatalysis, and in the synthesis of ordered ceramics. Our goal was the synthesis of 2-aminospiropyrazolilammonium chlorides and hexafluorophosphates. Our methodology is based on the tosylation of ß-aminopropioamidoximes with six-membered N-heterocycles (piperidine, morpholine, thiomorpholine, and phenylpiperazine) at the ß-position. 2-Aminospiropyrazolilammonium chlorides and hexafluorophosphates were obtained by the reaction of double ion substitution in the reaction of toluenesulfonates of 2-aminospiropyrazolinium compounds with an ethereal solution of HCl in ethanol and with ammonium hexafluorophosphate in ethanol in quantitative yields of 55-97%. The physicochemical characteristics of the synthesized compounds and their IR and NMR spectra are presented. The obtained salts were additionally characterized by the single-crystal XRD analysis. The presence of both axial and equatorial conformations of spirocations in solids was confirmed. 2-Aminospiropyrazolilammonium chlorides and hexafluorophosphates have weak in vitro antimicrobial activity on Gram-positive and Gram-negative bacterial lines.

Optimization of the chemolithotrophic denitrification of ion exchange concentrate using hydrogen-based membrane biofilm reactors.

A H2-based membrane biofilm reactor (MBfR) was used to remove nitrate from a synthetic ion-exchange brine made up of 23.8 g L-1 NaCl. To aid the selection of the best nitrate management strategy, our research was based on the integrated analysis of ionic exchange and MBfR processes, including a detailed cost analysis. The nitrate removal flux was not affected if key nutrients were present in the feed solution including potassium and sodium bicarbonate. Operating pH was maintained between 7 and 8. By using a H2 pressure of 15 psi, a hydraulic retention time (HRT) of 4 h, and a surface loading rate of 13.6 ± 0.2 g N m-2 d-1, the average nitrate removal flux was 3.3 ± 0.6 g N m-2 d-1. At HRTs of up to 24 h, the system was able to maintain a removal flux of 1.6 ± 0.2 g N m-2 d-1. Microbial diversity analysis showed that the consortium was dominated by the genera Sulfurimonas and Marinobacter. The estimated cost for a 200 m3/h capacity, coupled ion exchange (IX) + MBfR treatment plant is 0.43 USD/m3. This is a sustainable and competitive alternative to an IX-only plant for the same flowrate. The proposed treatment option allows for brine recycling and reduces costs by 55% by avoiding brine disposal expenses.

Using selectivity to evaluate aqueous- and resin-phase denitrification during biological ion exchange.

An increased fertilizer application for agricultural purposes has resulted in increased nitrate (NO3-) levels in surface water and groundwater around the globe, highlighting demand for a low-maintenance NO3- treatment technology that can be applied to nonpoint sources. Ion exchange (IEX) is an effective NO3- treatment technology and research has shown that bioregeneration of NO3- laden resins has the potential to minimize operational requirements and brine waste production that often prevents IEX application for decentralized treatment. In this work, batch denitrification experiments were conducted using solutions with low IEX selectivity capable of supporting the growth of denitrifying bacteria, while minimizing NO3- desorption from resins, encouraging resin-phase denitrification. Although only 15% of NO3- was desorbed by the low selectivity solution, this initial desorption started a cycle in which desorbed NO3- was biologically transformed to NO2-, which further desorbed NO3- that could be biotransformed. Denitrification experiments resulted in a 43% conversion rate of initially adsorbed NO3-, but biotransformations stopped at NO2- due to pH limitations. The balance between adsorption equilibria and biotransformation observed in this work was used to propose a continuous-flow reactor configuration where gradual NO3- desorption might allow for complete denitrification in the short retention times used for IEX systems.

Ion exchange synthesis of copper-based hydroxyapatite for the catalytic degradation of phenol.

Hydroxyapatite (HAP) is a material renowned for its exceptional capabilities in adsorbing and exchanging heavy metal ions, making it a widely employed substance within the environmental domain. This study aims to present a novel material, namely copper-HAP (Cu-HAP), which was synthesized via an ion exchange method. The resulting material underwent comprehensive characterization using scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller (BET) analysis. Subsequently, based on the principle of the Fenton-like oxidation reaction, the material was used for the degradation of phenol. The outcomes of the investigation revealed that the optimal preparation conditions for the catalyst were achieved at a temperature of 40 °C, a pH value of 5, and a relative dosage of Cu-HAP at 100 mg/g. Under the reaction conditions of a catalyst dosage of 2 g/L, a 30% hydrogen peroxide concentration of 30 mM, a phenol concentration of 20 mg/L, a pH value of 6, a temperature of 40 °C, and the degradation rate of phenol impressively reached 98.12%. Furthermore, the degradation rate remained at 42.31% even after five consecutive cycles, indicating the promising potential of Cu-HAP in the treatment of recalcitrant organic compounds within this field.

A Nanomedicine-Enabled Ion-Exchange Strategy for Enhancing Curcumin-Based Rheumatoid Arthritis Therapy.

Curcumin (Cur) has been clinically used for rheumatoid arthritis treatment by the means of reactive oxygen species (ROS) scavenging and immune microenvironment regulation. However, this compound has a poor water solubility and moderate antioxidative activity, favoring no further broadened application. Metal complexes of curcumin such as zinc-curcumin (Zn-Cur) features enhanced water solubilities, while copper-curcumin (Cu-Cur) shows a higher antioxidant activity but lower solubility than Zn-Cur. Based on their inherent biological properties, this work proposes a nanomedicine-based ion-exchange strategy to enhance the efficacy of Cur for rheumatoid arthritis treatment. Copper silicate nanoparticles with hollow mesoporous structure were prepared to load water-soluble Zn-Cur for constructing a composite nanomedicine, which can degrade in acidic microenvironment of arthritic region, releasing Cu2+ and Zn-Cur. Cu2+ then substitute for Zn2+ in Zn-Cur to form Cu-Cur with a significantly enhanced antioxidative effect, capable of efficiently scavenging ROS in M1 macrophages, promoting their transition to an anti-inflammatory M2 phenotype. In addition, the silicate released after nanocarrier degradation and the Zn2+ released after ion exchange reaction synergistically promote the biomineralization of osteoblasts. This work provides a new approach for enhancing the antiarthritic effect of Cur via an ion-exchange strategy.

A Universal Eluent System for Method Scouting and Separation of Biotherapeutic Proteins by Ion-Exchange, Size-Exclusion, and Hydrophobic Interaction Chromatography.

Characterization and quality control of biotherapeutic proteins commonly require the application of several orthogonal separation techniques in order to establish product identity and purity. Many of the techniques used rely on a buffered aqueous mobile phase system to maintain the native conformation of the protein and its variants. Optimal pH, buffer substance(s), and chromatography methods vary with each protein of interest and result in tedious method development for each new drug product. Linear controlled pH gradient systems from pH 5.6 to pH 10.2 has been shown to provide a global method for the separation of charge variants of monoclonal antibodies. This can be realized using two balanced zwitterionic buffer blends. The pH linearity of the resulting system, with a cation ion exchange column in place, can generate any pH value in this accessible pH range. This study expands the scope of this buffer system and demonstrates its application in conjunction with a quaternary HPLC pump for several analytical techniques: the pH optimization of salt gradient-based anion and cation exchange during method development, as well as performing pH gradient elution. In addition, the same universal buffers are used for hydrophobic interaction and size exclusion chromatography. This eluent system omits the need to prepare different buffers for each method and flushing of the HPLC system between method changes. The implementation of this concept is further demonstrated to allow an automated method scouting approach and selection of different methods that requires minimal manual intervention.