The effect of diluting povidone-iodine on bacterial growth associated with speech.

BACKGROUND: Povidone-Iodine (PI) may be diluted when used as an antiseptic prior to an intravitreal injection in an attempt to decrease patient discomfort. This study aims to investigate the effect of diluting povidone-iodine (PI) on bacterial growth from bacterial droplet dispersal associated with speech. METHODS: Participants read a standardised script for 5 min over a blood agar plate positioned at 20 cm in a simulated position of an intravitreal injection procedure. The blood agar plates were subject to a randomised pre-application of 1% PI; 2.5% PI; 5% PI and no pre-application (control). The plates were incubated at 37 °C for 72 h and the number of Colony Forming Units (CFUs) was determined. CFUs were summarised as median and interquartile range (IQR). Wilcoxon rank sum test was used to assess pairwise comparisons of the various PI concentrations to the control group. Any trend across PI concentration was assessed using Kendall's tau rank correlation. RESULTS: Twenty-one subjects participated. Control plates had a median growth of 25 CFUs (interquartile range [IQR]:15-40), 1% PI plates had a median growth of 30 CFUs (IQR:15-82), 2.5% PI had a median growth of 18 CFUs (IQR:10-32) and 5% PI had a median growth of 2 CFUs (IQR:0-5). There was significantly less bacterial growth with 5% PI compared to control (P < 0.001). Bacterial growth at 2.5% PI and 1% PI did not differ significantly from control. There was a statistically significant trend for decreasing colony count as PI concentration increased (P < 0.001). CONCLUSIONS: PI concentrations less than 5% are not effective at reducing bacterial growth from bacterial droplet dispersal associated with speech. When using PI for pre-injection antisepsis, concentrations below 5% should be avoided.

Influence of povidone-iodine on micro-tensile bonding strength to dentin under simulated pulpal pressure.

BACKGROUND: Previous studies had reported that bond strength deteriorate over time following the dentin surface pretreatment with chlorhexidine. Therefore, further investigations are needed to evaluate the effect of other materials such as povidone iodine. The purpose of this study was to investigate the effects of 10% povidone-iodine pretreatment on the resin-dentin micro-tensile bond strength of a single bond adhesive system in permanent teeth over time, and compare it with 2% chlorhexidine. METHODS: Flat dentin surfaces were prepared in 63 extracted permanent teeth. Teeth were randomly assigned to a 10% povidone-iodine pretreatment, a 2% chlorhexidine pretreatment, or a control group. Composite resin blocks were built up over treated surfaces under pulp pressure simulation. The prepared specimens were assigned to three storage time, 24 h, 1 week, and 2 months. Samples were vertically sectioned to obtain specimens of 0.7 to 1.2 mm2 cross-sectional area. RESULTS: No significant reduction of bond strength of povidone iodine group was found among the three storage times (p = 0.477). A significant reduction of bond strength for both chlorhexidine and control groups was found in the three storage times (p <  0.001). CONCLUSION: Povidone iodine pretreatment of etched dentin was effective in reducing the loss of bond strength over time, while the chlorhexidine pretreatment and negative control showed significant deterioration in micro-tensile bond strength over time in permanent teeth.

Preoperative skin antiseptics for prevention of cardiac implantable electronic device infections: a historical-controlled interventional trial comparing aqueous against alcoholic povidone-iodine solutions.

AIMS: Local skin antiseptic prevention against cardiac implantable electronic device (CIED) infections is not yet fully understood. This monocentre historical-controlled study sought to (i) conduct a prospective observational analysis comparing two antiseptic skin preparations over two similar consecutive periods of time, one conducted over a 1-year period using an aqueous povidone-iodine solution (Group I) and the other over the following with an alcoholic povidone-iodine solution (Group II); (ii) determine the predictive factors of CIED infection. METHODS AND RESULTS: Cardiac implantable electronic device implantation was performed in 1326 patients (pts). A total of 32 pts (2.4%) developed a CIED infection. Long-term follow-up (26 ± 3 months) revealed no significant difference between the groups: infections were observed in 14 of the 648 pts (2.2%) in Group I vs. 18 of the 678 pts (2.7%) in Group II (P = 0.9). Single- and multiple-variable logistic regression analyses were performed to identify risk factors; adjusted odds ratios (aORs) and 95% confidence intervals (CIs) were calculated. The occurrence of infection was positively correlated with re-intervention (aOR, 7.16; 95% CI, 2.56-19.99; P < 0.0001), number of generator replacements, mean (aOR, 3.47; 95% CI, 2.22-5.44; P < 0.001), and haematoma (aOR, 48.4; 95% CI, 13.45-174.25; P < 0.0001). CONCLUSION: This study found that aqueous and alcoholic povidone-iodine solutions displayed similar antiseptic effects regarding CIED infection prevention. Independent predictive factors of CIED infection were re-intervention, haematoma, and number of generator replacements.

Foaming Betadine Spray as a potential agent for non-labor-intensive preoperative surgical site preparation.

BACKGROUND: The Centers for Disease Control and Prevention's (CDC) National Healthcare Safety Network (NHSN) report published in 2009 shows that there were about 16,000 cases of surgical site infection (SSI) following ~ 850,000 operative procedures making SSI one of the most predominant infection amongst nosocomial infections. Preoperative skin preparation is a standard procedure utilized to prevent SSIs thereby improving patient outcomes and controlling associated healthcare costs. Multiple techniques/ products have been used for pre-operative skin preparation, like 2 step scrubbing and painting, 2 step scrubbing and drying, and 1 step painting with a drying time. However, currently used products require strict, time consuming and labor-intensive protocols that involve repeated mechanical scrubbing. It can be speculated that a product requiring a more facile protocol will increase compliance, thus promoting a reduction in SSIs. Hence, the antimicrobial efficacy of a spray-on foaming formulation containing Betadine (povidone-iodine aerosol foam) that can be administered with minimum effort is compared to that of an existing formulation/technique (Wet Skin Scrub). METHODS: In vitro antimicrobial activities of (a) 5% Betadine delivered in aerosolized foam, (b) Wet Skin Scrub Prep Tray and (c) liquid Betadine are tested against three clinically representative microorganisms (S. aureus, S. epidermidis and P. aeruginosa,) on two surfaces (agar-gel on petri-dish and porcine skin). The log reduction/growth of the bacteria in each case is noted and ANOVA statistical analysis is used to establish the effectiveness of the antimicrobial agents, and compare their relative efficacies. RESULTS: With agar gel as the substrate, no growth of bacteria is observed for all the three formulations. With porcine skin as the substrate, the spray-on foam's performance was not statistically different from that of the Wet Skin Scrub Prep technique for the microorganisms tested. CONCLUSIONS: The povidone-iodine aerosolized foam could potentially serve as a non-labor intensive antimicrobial agent for surgical site preparation.

Effect of different chemical disinfectants on color stability of acrylic denture teeth.

PURPOSE: The purpose of this study was to evaluate the effects of chemical disinfectants on the color stability of acrylic denture teeth (ADT) via spectrophotometric analysis. MATERIALS AND METHODS: A total of 120 central ADT specimens were randomly assigned to eight experimental groups and immersed in the following solutions (n = 15). Tap water/control group (CON), neutral soap (NTS), 2% sodium hypochlorite (SHC1), 5.25% sodium hypochlorite (SHC2), sodium perborate (SPB), povidone-iodine (PVI), chlorhexidine gluconate (CHG), and glutaraldehyde (GTA). Color measurements of teeth were performed by spectrophotometry after 10, 30, 48, 72, 144, and 960 immersion cycles in each tested solution. Color differences (ΔE*) were then evaluated using the Commission Internationale D'Eclairage (CIE) L*a* b* color system. Furthermore, Kruskal-Wallis, Mann-Whitney U, and Friedman comparison tests (α = 0.05) were performed on all data. RESULTS: There were significant differences in ΔE* values (p < 0.05) among the eight experimental groups. In addition, the highest ∆E* values were obtained in group SHC2, followed, respectively, by the SHC1, CHG, SPB, PVI, NTS, and CON groups. CONCLUSION: All the chemical disinfectants used in the study affected the color values of ADTs. Furthermore, ΔE* values increased along with the number of immersion cycles and total immersion time.

Combining Alginate/PVPI-Based Film with Frequency Rhythmic Electrical Modulation System (FREMS) Technology as an Advanced Strategy for Diabetic Wounds.

Diabetes is rising as one of the most diffused diseases of the century with the related urgent necessity to face its systemic and local effects on the patients, such as cardiovascular problems, degeneration of limbs, and dysfunction of the wound healing process. The diffusion of leg ulcers has been estimated to be 1.51 for 1000 population, and these non-resolved wounds can produce several social, economic, and mental health issues in diabetic patients. At the same time, these people experience neuropathic pain that causes morbidity and a further decrease in their quality of life. Here, a new study is presented where asodium alginate/Polyvinylpyrrolidone-Iodine complex (PVPI)-based wound dressing is combined with the Frequency Rhythmic Electrical Modulation System (FREMS) technology, an established medical device for the treatment of neuropathic pain and diabetic ulcers. The produced Alginate/PVPI-based films are characterized in terms of morphology, chemistry, wettability, bio-/hemo-compatibility, and clotting capacity. Next, the Alginate/PVPI-based films are used together with FREMS technology in diabetic mice models, and synergism of their action in the wound closure rate and anti-inflammatory properties is found. Hence, how the combination of electrical neurostimulation devices and advanced wound dressings can be a new approach to improve chronic wound treatment is demonstrated.

Effects of different antiviral mouthwashes on the surface roughness, hardness, and color stability of composite CAD/CAM materials.

OBJECTIVE: To evaluate the effect of COVID-19 preventive mouthwashes on the surface hardness, surface roughness (Ra), and color change (ΔE) of three different polymer-based composite CAD/CAM materials (Vita Enamic (ENA), Grandio Block (GB), Lava Ultimate (LU)). METHODS: A total of 100 rectangular-shaped specimens with dimensions of 2 mm × 7 mm × 12 mm were obtained by sectioning three different CAD/CAM blocks and randomly divided into five subgroups according to the 30 days of mouthwash immersion protocol as follows: Control: artificial saliva, PVP-I: 1% povidone-iodine, HP: 1.5% hydrogen peroxide, CPC: mouthwash containing 0.075% cetylpyridinium chloride, EO: mouthwash containing essential oils. Microhardness, Ra, and ΔE values were measured at baseline and after 30 days of immersion protocols. Data were analyzed using the Wald Chi-square, two-way ANOVA, and post hoc Tukey tests. RESULTS: The independent factors (materials and solutions) significantly influenced the microhardness and color (p < 0.001). Ra of the materials was not affected by any of the mouthwashes (p > 0.05). The microhardness and color of each material varied significantly after immersion in PvP-I and HP (p < 0.05). The highest percentage change in microhardness, Ra, and ΔE was found in LU immersed in PvP-I and HP mouthwashes, while the lowest change was found in ENA groups (p < 0.05). CONCLUSION: Within the limitations of this study, it was found that the surface hardness and color of tested polymer-based composite CAD/CAM materials are susceptible to degradation and change after 30 days of immersion in 1% PvP-I and 1.5% HP mouthwashes.

Obstructed vein delivery of ceftriaxone via poly(vinyl-pyrrolidone)-iodine-chitosan nanofibers for the management of diabetic foot infections and burn wounds.

Superficial skin injuries especially burn injuries and unhealed diabetic foot open wounds remain troubling for public health. The healing process is often interrupted by the invasion of resistant pathogens that results in the failure of conventional procedures outside the clinical settings. Herein, we designed nanofibers dressing with intrinsic antibacterial potential of poly(vinyl-pyrrolidone)-iodine/ poly (vinyl)-alcohol by electrospinning with chitosan encapsulating ceftriaxone (CPC/NFs). The optimized electrospun CPC/NFs exhibited smooth surface morphology with average diameter of 165 ± 7.1 nm, drug entrapment and loading efficiencies of 76.97 ± 4.7 % and 8.32 ± 1.73 %, respectively. The results displayed smooth and uniformed fibers with adequate thermal stability and ensured chemical doping. The enhanced in vitro antibacterial efficacy of CPC/NFs against resistant E. coli isolates and biosafety studies encourage the use of designed nanofibers dressing for burn injuries and diabetic foot injuries. In vivo studies proved the healing power of dressing for burn wounds model and diabetic infected wounds model. Immunofluorescence investigation of the wound tissue also suggested promising healing ability of CPC/NFs. The designed approach would be helpful to treat these infected skin open wounds in the hospitals and outside the clinical settings.

Antibacterial Iodine-Releasing Coatings of Cross-Linked Poly(N-vinylpyrrolidone) Synthesized by Solvent-Free Initiated Chemical Vapor Deposition.

Biomaterial-associated infections caused by bacteria pose a great threat to human health, and therefore, various antibacterial coatings have been developed to control bacterial infections. Povidone iodine (PVP-I) is a broad-spectrum antimicrobial agent without drug resistance to most pathogenic microorganisms and has been widely used in the clinic. However, its applications in the field of coatings are limited due to its strong water solubility. Here, we used initiated Chemical Vapor Deposition (iCVD) technique to synthesize cross-linked poly(N-vinylpyrrolidone-co-ethylene glycol dimethacrylate) (PVE) coatings to firmly immobilize poly(N-vinylpyrrolidone) (PVP) on surfaces. After complexation with iodine, PVE-I coatings exhibited potent bacteria-killing and antifouling activities against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus in vitro owing to the antibacterial effect of iodine and the hydrophilicity of VP, respectively. The killing and antifouling effects were positively correlated with the VP content. The PVE-I-2 coating displayed excellent anti-infection performance in a rat subcutaneous implantation model in vivo. This study provided a simple method for preparing stable povidone iodine coatings on surfaces via solvent-free iCVD, and combined bacteria-killing and antifouling strategies to fabricate multifunctional antibacterial coatings against bacterial infections on biomaterial surfaces.

Iodine/soluble starch cryogel: An iodine-based antiseptic with instant water-solubility, improved stability, and potent bactericidal activity.

Iodine (I2) as a broad-spectrum antiseptic has been widely used for treating bacterial infections. However, I2 has low water-solubility and sublimes under ambient conditions, which limits its practical antibacterial applications. The highly specific and sensitive reaction between I2 and starch discovered 200 years ago has been extensively applied in analytical chemistry, but the antibacterial activity of the I2-starch complex is rarely investigated. Herein, we develop a novel type of iodine-based antiseptics, iodine-soluble starch (I2-SS) cryogel, which can dissolve in water instantly and almost completely kill bacteria in 10 min at 2 µg/mL of I2. Although KI3 and the commercially available povidone­iodine (I2-PVP) solutions show similar antibacterial efficacy, the high affinity of I2 to SS largely enhances the shelf stability of the I2-SS solution with ∼73 % I2 left after one-week storage at room temperature. In sharp contrast, ∼8.5 % and âˆ¼2.5 % I2 are detected in KI3 and I2-PVP solutions, respectively. Mechanistic study reveals that the potent antibacterial effect of I2-SS originates from its attack on multiple bacterial targets. The outstanding antibacterial activity, capability of accelerating wound healing, and good biocompatibility of I2-SS are verified through further in vivo experiments. This work may promote the development of next-generation iodine-based antiseptics for clinical use.

Physicochemical characterization of tretinoin tocoferil emulsion and povidone-iodine sugar ointment blend developed for improved regulation of wound moisture.

Maintenance of proper moisture and regulation of infection are simultaneously required to promote healing of pressure ulcers. Continuous use of water-rich ointment may often lead to excess moisture and induce edematous granulation tissue. Use of water soluble ointment may excessively absorb exudates and induce dry granulation tissue. Selection of appropriate topical ointment is desired to avoid worse clinical outcomes. For adjustment of wound moisture a novel blended ointment (tretinoin tocoferil-povidone-iodine (TR-PI)) was developed consisting of emulsion base, tretinoin tocoferil oil-in-water (o/w) emulsion (TR-cream), and sugar base, povidone-iodine and sugar (PI-sugar). For the characterization of TR-PI water absorption was tested using Franz diffusion cell with cellulose membrane. For rheological characteristics spreadability was tested using spread meter and yield value was calculated. Iodine permeation was tested using a permeation cell with silicon membrane. Water absorption rate constant of TR-PI with combination ratio of PI-sugar at 75% (TR-PI75, 18.5 mg cm(-2) min(-0.5)) was equivalent to that of TR-cream alone (16.4 mg cm(-2) min(-0.5)). The yield value of TR-PI75 (26.1 Pa) exhibited intermediate values as compared to those of TR-PI with combination ratio of PI-sugar at 50% (11.3 Pa) and TR-cream alone (46.8 Pa). The amount of released free-iodine from TR-PI75 was similar to that released from PI-sugar alone. TR-PI75 may have superior performance in keeping the moist environment in wounds and in preventing infection. TR-PI75 can be used to promote formation of favorable granulation tissue in pressure ulcers with moderate exudates.

Biomedical evaluation of a novel nitrogen oxides releasing wound dressing.

Chronic wounds are a major cause for both suffering and economical losses. Management of chronic non-healing wounds requires multipronged approach. They are polymicrobial and agonizing for the patient due to associated pain. Moist dressing providing antimicrobial action is a highly desirable chronic wound management option. Here we report a hydrogel based dressing that possesses the antimicrobial properties of acidified sodium nitrite and the homeostatic property of a hydrogel. The dressing was developed by combining citric acid cross-linked cotton gauze and sodium nitrite loaded gelatin. The cotton gauze was cross-linked with citric acid by pad-dry-curing in presence of nano-titania catalyst. The cotton gauze-gelatin hydrogel combination was gamma-irradiated and freeze-dried. At the time of application, the freeze-dried dressing is wetted by sodium nitrite solution. The dressing has a fluid uptake ability of 90 % (w/v) and the water vapour evaporation rate was estimated to be 2,809 ± 20 g/m(2)/day. The dressing showed significant antimicrobial activity against both planktonic and biofilm forms and was effective during consecutive re-uses. Cytotoxicity study showed inhibition of fibroblasts, but to a lesser extent than clinically administered concentrations of antiseptic like povidone iodine. Storage at 37 °C over a 3 month period resulted in no significant loss of its antimicrobial activity.

Topical iodophor preparations: chemistry, microbiology, and clinical utility.

Iodophor preparations are commonly used in all medical specialties for antisepsis of the skin prior to injections, invasive procedures, and surgery. Povidone-iodine has some very intriguing properties that make it extremely effective as a broad spectrum bacteriocidal agent with no known bacterial resistance, potentially lending itself to broader applications than its current uses. In this article the background, formulations, chemistry, and microbiology of iodine will be reviewed and recent clinical investigations of utility beyond skin antisepsis will be discussed.

Physicochemical characterisation and biological evaluation of polyvinylpyrrolidone-iodine engineered polyurethane (Tecoflex(®)).

Bacterial adhesion and encrustation are the known causes for obstruction or blockage of urethral catheters and ureteral stents, which often hinders their effective use within the urinary tract. In this in vitro study, polyvinylpyrrolidone-iodine (PVP-I) complex modified polyurethane (Tecoflex(®)) systems were created by physically entrapping the modifying species during the reversible swelling of the polymer surface region. The presence of the PVP-I molecules on this surfaces were verified by ATR-FTIR, AFM and SEM-EDAX analysis, while wettability of the films was investigated by water contact angle measurements. The modified surfaces were investigated for its suitability as a urinary tract biomaterial by comparing its lubricity and ability to resist bacterial adherence and encrustation with that of base polyurethane. The PVP-I modified polyurethane showed a nanopatterned surface topography and was highly hydrophilic and more lubricious than control polyurethane. Adherence of both the gram positive Staphylococcus aureus (by 86%; **P < 0.01) and gram-negative Pseudomonas aeruginosa (by 80%; *P < 0.05) was significantly reduced on the modified surfaces. The deposition of struvite and hydroxyapatite the major components of urinary tract encrustations were significantly less on PVP-I modified polyurethane as compared to base polyurethane, especially reduction in hydroxyapatite encrustation was particularly marked. These results demonstrated that the PVP-I entrapment process can be applied on polyurethane in order to reduce/lower complications associated with bacterial adhesion and deposition of encrustation on polyurethanes.

Hydrogen peroxide and povidone-lodine solution--a dangerous combination.

When mixed with povidone-iodine solution, hydrogen peroxide can release enough oxygen to cause sealed waste containers to burst open. Such risks can also result from using a sealed container to collect hydrogen peroxide that has mixed with body fluids (for instance, in a debridement procedure). Staff should be instructed to avoid both practices.

Formulation Development of Topical Preparation Containing Nanoparticles of Povidone-Iodine for Wound Healing.

Povidone-iodine (PVI) is an antiseptic drug that is used for wound healing or for repair of the damaged tissue. Studies on solid lipid nanoparticles (SLNs) indicate that this system could potentially be used as a delivery system with improved drug entrapment efficiency and controlled drug release for hydrophilic actives. This study focuses on developing a topical gel containing SLNs of PVI for wound healing. SLNs were prepared by using the solvent emulsification diffusion method. Lipids such as glycerol monostearate, palmitic acid, and stearic acid, and surfactants such as polysorbate 80, soyalecithin, and Pluronic F-68 were used for the preparation of SLN. These were screened out based on particle size and entrapment efficiency of SLN. Gel was prepared by using Carbopol 940 (1% w/w) and propylene glycol (10% w/w). Formulated SLNs were evaluated by various in vitro and in vivo techniques. Based on the results, the drug-to-lipid ratio (1:3) and 2% polysorbate 80 (surfactant) along with stirring rate (3,000 rpm) produced the desired particle size (285.4 nm) with good stability. 22.85% drug loading and 88.83% drug entrapment efficiency were found in the optimized formulation. In vitro drug release shows that it follows the Korsmeyer-Peppas model. The animal study shows that the period of epithelization produced by the test group was 17.14 ± 1.35 days, which was near to that of the standard group (16.25 ± 1.24 days). Clinical Trial Registration number: 1044/PO/Re/S/07/CPCSEA.

A novel bimetallic (Fe/Bi)-povidone-iodine micro-flowers composite for photocatalytic and antibacterial applications.

The present work describes the synthesis of polyvinylpyrrolidone (PVP) assisted Fe-BiOI based Fe/Bi-povidone­iodine (Fe/Bi-P-I) micro-flowers based composite and its photocatalytic and antibacterial applications. The Fe/Bi-P-I micro-flowers-based composite material was synthesized using a simple co-precipitation method. The prepared Fe/Bi-P-I micro-flowers-based composite materials were characterized using various characterization techniques and tested against photocatalytic degradation of rhodamine B (RhB) dye and antibacterial analysis. The PVP or povidone­iodine provides more exposure of reactive sites and oxygen vacancies, which leads to a high separation rate of photoinduced charge carriers, and migration, thereby 100% of photodegradation efficiency at 1 mg/L initial concentration of RhB dye towards the synthesized P-Fe-BiOI based micro-flowers composite. Interestingly, Povidone-Iodine in Fe/Bi-P-I micro-flowers-based composite might be advantageous for antimicrobial activity against both gram-negative (E. coli), and gram-positive (S. aureus) bacterial strains. Therefore, the prepared Fe/Bi-P-I micro-flowers-based composite improved both photocatalytic degradation of organic pollutants as well as high antimicrobial activity. The method of synthesizing the Bi/Fe-P-I micro flower composite in the present study is novel, facile, and economically viable.

Quaternary ammonium N,N,N-trimethyl chitosan derivative and povidone­iodine complex as a potent antiseptic with enhanced wound healing property.

The importance of developing more potent antimicrobials and robust infection prevention practices has been highlighted recently with the increase in reports of emerging bacterial resistance mechanisms and the development of antibiotic-resistant microbes. In this study, a quaternary ammonium chitosan derivative, N,N,N-trimethyl chitosan chloride (TMC) with inherent bactericidal property was synthesized and complexed with povidone­iodine (PVP-I) to create a potentially more potent antiseptic solution that could also significantly enhance the wound healing process. TMC, a positively charged, water-soluble derivative of chitosan, formed stable solutions with PVP-I at 5% w/v TMC concentration (TMC5/PVP-I). TMC5/PVP-I was significantly effective against multidrug-resistant bacteria S. aureus compared with PVP-I alone. TMC/PVP-I solutions also showed fungicidal property against C. albicans, with no cytotoxic effects when tested against human fibroblast cells cultured in vitro. Wound healing assessment in vivo revealed early collagen formation and re-epithelialization for TMC5/PVP-I treated wounds in rats relative to control and PVP-I only. Formulation of TMC/PVP-I solutions presented in the study can be easily adapted in the existing production of commercial PVP-I creating a new product with more potent bactericidal and enhanced wound healing properties for optimal wound care.

Dental floss impregnated with povidone-iodine coated with Eudragit L-100 as an antimicrobial delivery system against periodontal-associated pathogens.

Introduction. Periodontitis is among the most widespread oral bacterial diseases affecting 15-20% of the world population.Aim. This study aimed to develop dental floss impregnated with povidone-iodine (PVP-I) as an antimicrobial delivery system against periodontopathogenic bacteria in a planktonic form and within biofilms.Methods. Identical lengths of dental floss impregnated with PVP-I formulations were placed on agar along with previously grown periodontal pathogens. The bioactivity of the dental floss was investigated by response-surface methodology. In order to explore the antibacterial activity of the selected formulation and the potential application in the prevention and treatment of plaque-caused diseases such as periodontitis and caries, the antibacterial and anti-biofilm activity of the selected PVP-I formulation against pathogenic bacteria were investigated.Results. The results indicated that the coating formulation containing Eudragit L-100 2.90 %, PVP-I 24.58 % and PEG 400 3.73 % had antimicrobial activity for all pathogens. The mechanism of this formulation involved disruption of bacterial cell membranes. Moreover, this formulation inhibited the formation of oral pathogenic biofilms.Conclusion. It was concluded that Eudragit L-100 and PVP-I-coated dental floss represented a potential therapeutic agent to prevent periodontal diseases and dental caries and exhibited non-toxicity to periodontal ligament cells.

Poly (vinylpyrrolidone)­iodine engineered poly (ε-caprolactone) nanofibers as potential wound dressing materials.

Facilitating the process of wound healing and effective treatment of wounds remains a serious challenge in healthcare. Wound dressing materials play a major role in the protection of wounds and in accelerating the natural healing process. In the present study, novel core/shell (c/s) nanofibrous mats of poly(vinyl pyrrolidone)­iodine (PVPI) and polycaprolactone (PCL) were fabricated using a co-axial electrospinning process followed by their surface modification with poly-l-lysine. The developed nanofibrous mats were extensively characterized for their physicochemical properties using various analytical techniques. The core/shell structure of the PVP-I/PCL nanofibers was confirmed using TEM analysis. The PVP-I release studies showed an initial burst phase followed by a sustained release pattern of PVP-I over a period of 30 days. The developed nanofibers exhibited higher BSA and fibrinogen adsorption as compared to pristine PCL. Cytotoxicity studies using MTT assay demonstrated that the PVP-I/PCL (c/s) nanofibers were cytocompatible at optimized PVP-I concentration (3 wt%). The PCL-poly-l-lysine and PVP-I/PCL-poly-l-lysine nanofibers exhibited higher cell viability (24.2% and 21.4% higher at day 7) when compared to uncoated PCL and PVP-I/PCL nanofibers. The PVP-I/PCL nanofibers showed excellent antimicrobial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria. The inflammatory response of Mouse RAW 264.7 macrophage cells towards the nanofibers was studied using RT-PCR. It revealed that the pro-inflammatory cytokines (TNF-α and IL-1ß) were significantly upregulated on PCL nanofibers, while their expression was comparatively lower on poly-l-lysine coated PCL or PVP-I/PCL(c/s) nanofibers. Overall, the study highlights the ability of poly-l-lysine coated PVP-I/PCL (c/s) nanofibers as potential wound dressing materials effectively facilitating the early stage wound healing and repair process by virtue of their selective modulation of inflammation, cell adhesion and antimicrobial properties.