Machine Learning Effectively Diagnoses Mandibular Deformity Using Three-Dimensional Landmarks.

BACKGROUND: Jaw deformity diagnosis requires objective tests. Current methods, like cephalometry, have limitations. However, recent studies have shown that machine learning can diagnose jaw deformities in two dimensions. Therefore, we hypothesized that a multilayer perceptron (MLP) could accurately diagnose jaw deformities in three dimensions (3D). PURPOSE: Examine the hypothesis by focusing on anomalous mandibular position. We aimed to: (1) create a machine learning model to diagnose mandibular retrognathism and prognathism; and (2) compare its performance with traditional cephalometric methods. STUDY DESIGN, SETTING, SAMPLE: An in-silico experiment on deidentified retrospective data. The study was conducted at the Houston Methodist Research Institute and Rensselaer Polytechnic Institute. Included were patient records with jaw deformities and preoperative 3D facial models. Patients with significant jaw asymmetry were excluded. PREDICTOR VARIABLES: The tests used to diagnose mandibular anteroposterior position are: (1) SNB angle; (2) facial angle; (3) mandibular unit length (MdUL); and (4) MLP model. MAIN OUTCOME VARIABLE: The resultant diagnoses: normal, prognathic, or retrognathic. COVARIATES: None. ANALYSES: A senior surgeon labeled the patients' mandibles as prognathic, normal, or retrognathic, creating a gold standard. Scientists at Rensselaer Polytechnic Institute developed an MLP model to diagnose mandibular prognathism and retrognathism using the 3D coordinates of 50 landmarks. The performance of the MLP model was compared with three traditional cephalometric measurements: (1) SNB, (2) facial angle, and (3) MdUL. The primary metric used to assess the performance was diagnostic accuracy. McNemar's exact test tested the difference between traditional cephalometric measurement and MLP. Cohen's Kappa measured inter-rater agreement between each method and the gold standard. RESULTS: The sample included 101 patients. The diagnostic accuracy of SNB, facial angle, MdUL, and MLP were 74.3, 74.3, 75.3, and 85.2%, respectively. McNemar's test shows that our MLP performs significantly better than the SNB (P = .027), facial angle (P = .019), and MdUL (P = .031). The agreement between the traditional cephalometric measurements and the surgeon's diagnosis was fair. In contrast, the agreement between the MLP and the surgeon was moderate. CONCLUSION AND RELEVANCE: The performance of the MLP is significantly better than that of the traditional cephalometric measurements.

Effects of twin-block appliance on upper airway parameters in OSA children with class II malocclusion and mandibular retrognathia: a CBCT study.

Twin-block appliance had been advocated as a potential treatment option in paediatric obstructive sleep apnoea (OSA) due to their favourable effect in enhancing upper airway parameters and improving OSA symptoms. The aim of this study was to evaluate the effect of twin-block appliance therapy on upper airway parameters/dimensions and the apnoea-hypopnea indexes (AHIs) in OSA children with class II mandibular retrognathic skeletal malocclusion using cone-beam computed tomography. This prospective longitudinal study comprised 34 polysomnography-proven OSA growing children with class II mandibular retrognathic skeletal malocclusion between the ages of 8 and 12 years who had completed myofunctional twin-block therapy and matched corresponding controls. The upper airway was segmented into the nasopharynx, oropharynx, and hypopharynx, and the effect of twin-bock treatment on upper airway parameters/dimensions was assessed pre- and posttreatment using CBCT analysis, while a second standard overnight PSG was performed to determine changes in the AHI. At the nasopharynx level, minimal (nonsignificant) increases in all variables were observed within the twin-block group and between the groups (P > 0.05). At the level of the oropharynx, all variables increased significantly in the treatment group and between groups (P < 0.001), but these increases were nonsignificant in the control group. At the level of the hypopharynx, only the minimum cross-sectional area (MCA) increased significantly in the treatment group (P = 0.003). The change in MCA was also significant between the groups (P = 0.041). In addition, the upper airway length increased significantly in the twin-block group (P = 0.0154), and the AHI decreased by 74.8% (P < 0.001). CONCLUSION: Correction of class II mandibular retrognathic skeletal malocclusion with twin-block appliance resulted in a significant increase in upper airway volume, MCA, anteroposterior and lateral distances of the MCA at the level of the oropharynx, MCA at the level of the hypopharynx and upper airway length, and a significant decrease in AHI, but it had no effect on nasopharynx parameters. WHAT IS KNOWN: • CBCT imaging has been shown to be an effective and precise diagnostic tool for analyzing the upper airways and craniofacial structures. • Twin block appliance may be an effective treatment modality in children with OSA. WHAT IS NEW: • Minimal cross-sectional area of upper ways may be the most relevant potential parameter when explaining how the upper airway anatomy plays role of in the pathogenesis of pediatric OSA. • Twin block appliance induced favorable changes in upper airway morphology (oropharynx area mainly) and respiratory parameters in OSA children with class II malocclusion.

Mandibular advancement analysis among orthodontists, lay people and patients in class II malocclusion subjects. A three-dimensional imaging study.

OBJECTIVE: To evaluate the acceptance of orthodontists, laypeople and the patient when progressive mandibular advancements are performed in class II subjects with mandibular retrognathism. SETTING AND SAMPLE: 3D images were obtained by an optical surface scanning of fifteen individuals (12 males and three females, mean age of 23 years and 8 months) with mandibular retrognathism in three mandibular positions: maximum intercuspation (MIC) and progressive mandibular advancement of 2 and 4 mm. METHODS: The images (n = 45) were evaluated through a scale by two groups of panellist, 20 orthodontists, 20 laypeople and by the patients themselves (n = 15). The participants evaluated and rated each video and give scores between 0 and 10, according to their perception of facial harmony. MANOVA for repeated measures was used for intra- and intergroup differences and to evaluate the patients' self-perception. RESULTS: Laypeople reported better face acceptance than orthodontists in MIC and progressive mandibular advancement of 2 and 4 mm (P < .0001). 80% of the patients evaluated their own face as pleasant in MIC. Around half of them did not note significant difference following mandibular advancement of 2 mm as compared with MIC and even two-third attributed lower scores when the mandible was advanced 4 mm. CONCLUSION: A high variability was observed among all groups of raters. Patient´s opinion should be taken into account when mandibular advancement of 4 mm or more is planned. This study suggests that a thorough discussion of facial changes resulting from mandibular advancement should be carried out among professionals, parents and patients.

Sagittal Cephalometric Evaluation Without Point Nasion: Sagittal G-Triangle Analysis.

ABSTRACT: This study aims to introduce a new sagittal cephalometric measurement, the sagittal G-triangle analysis, to accurately and reproducibly assess the sagittal jaw relationship. Sagittal G-triangle analysis, which consists of angles AXK and BXK, is based on an equilateral triangle (Bo-X-K) constructed using 5 cephalometric landmarks (Ba, Bo, Po, Or, and G). To test the diagnostic efficiency of this analysis, pretreatment cephalometric radiographs of 120 female and 120 male Chinese patients were randomly selected. For each enlisted subject, angles SNA and SNB as well as angles AXK and BXK were measured and recorded. On the basis of the SNA and SNB results, subjects were categorized into 6 groups: maxillary retrognathism, normal maxilla, maxillary prognathism, mandibular retrognathism, normal mandible, and mandibular prognathism. The diagnostic efficiency of angles AXK and BXK were evaluated using various statistical tests. A high correlation was detected between angles SNA and AXK as well as between angles SNB and BXK. Female patients with angle AXK between -2.255° and 2.860° and male patients with angle AXK between -2.615° and 2.120° were considered to have a normal maxilla position. Female patients with angle BXK between -2.61° and 2.93° and male patients with angle BXK between -2.275° and 0.610° were considered to have a normal mandible position. In conclusion, sagittal G-triangle analysis could be used as an alternative method for the evaluation of the sagittal position of the maxilla and mandible in cephalometric analysis.

Comprehensive three-dimensional positional and morphological assessment of the temporomandibular joint in skeletal Class II patients with mandibular retrognathism in different vertical skeletal patterns.

BACKGROUND: Only a few studies have used 3D cone-beam computed tomography (CBCT) analysis to evaluate the positional and morphological characteristics of the temporomandibular joint (TMJ) in adults with skeletal Class II. No studies have focused on the case of skeletal Class II with mandibular retrognathism in different vertical skeletal patterns. As a result, this study aimed to evaluate and compare the position and morphology of TMJ in adults with skeletal Class II with mandibular retrognathism in different vertical skeletal patterns to the position and morphology of TMJ in the normal Chinese adult population in three dimensions. METHODS: This retrospective study analyzed CBCT images of 80 adult patients. Subjects with skeletal Class II with a normal sagittal position of the maxilla and mandibular retrognathism were classified according to the mandibular angle and facial height ratio into three groups of 20 subjects each: hypodivergent, normodivergent, and hyperdivergent groups, as well as a control group of 20 subjects. The following 3D measurements of TMJ were evaluated: (1) position, parameters, and inclination of the mandibular fossa; (2) position, parameters, and inclination of the mandibular condyle; (3) condyle centralization in their respective mandibular fossae; (4) anterior, posterior, superior, and medial joint spaces; and (5) 3D volumetric measurements of the TMJ spaces. Measurements were statistically analyzed by one-way ANOVA test, followed by Tukey's post hoc test. RESULTS: Significant differences were found in the hyperdivergent and hypodivergent groups compared with the normal group in the vertical and anteroposterior mandibular fossa position, vertical condylar inclination, and condylar width and length. The hyperdivergent group showed the significantly highest condylar inclination with the midsagittal plane; anterior and superior positioning of the condyle; smallest anterior, superior, and medial joint spaces; and largest volumetric total joint space relative to the two other groups. CONCLUSIONS: The condyle-fossa position and morphology differ with various vertical facial patterns in individuals with skeletal Class II mandibular retrognathism. These differences could be considered during TMD diagnosis and orthodontic treatment.

The goniomaxillar length/goniomandibular length ratio in normal newborn infants: A clinical tool for defining chin position abnormalities.

Retrognathia (recessed chin) and prognathism (prominent chin) often present as signs of an underlying condition. Accurate clinical definitions are important. Yet their definitions were according to "clinical impression", or to seldom used X-ray criteria. We propose a statistical and anthropometric definition of retrognathia and prognathism based upon the ratio between the goniomaxillar length (distance between the gonion at the mandible angle and the subnasale and the goniomandibular length (distance between the mandible angle and the most anterior point of the bony chin). We assumed that an increase in the ratio indicates retrognathia and a decrease reflects prognathism. We conducted a prospective, observational, anthropometric study in 204 consecutive healthy term infants. Measurements took place on the second day of life, using sliding calipers. Mean ± SD of goniomandibular length (5.1 ± 0.3 cm), goniomaxillar length (5.4 ± 0.3 cm), were calculated. All measurements correlated significantly with gestational age, and with infant birthweight. The mean ± SD goniomaxillar length/goniomandibular length ratio was 1.06 ± 0.05. We defined a normal ratio as being within 2 SD of the mean, that is, between 0.96 and and 1.16. This ratio correlated with neither gestational age nor with birthweight. We conclude that the goniomaxillar length/goniomandibular length ratio can be calculated whenever retro - or prognathism is suspected. A ratio outside of the 95% confidence interval should help in making this diagnosis. An increase in this ratio beyond 2 SD above the mean (1.16) could be interpreted as retrognathia and a decrease beyond 2 SD below the mean (0.96) as prognathism.

[Orthodontic treatment of adult patients with mandibular retrognathia]. / Ortodonticheskoe lechenie vzroslykh patsientov s nizhnei retrognatiei.

This article describes a case report of the patient with mandibular retrognathia, class II malocclusion, constriction and deformation of dental arches and bimaxillary protrusion. Due to the patient's refuse to undergo the orthognathic surgery, after diagnostic, it was decided to carry out the orthodontic dentoalveolar compensation. The combined use of the functional fixed telescopic appliance (FFTA), bracket system and orthodontic miniscrews made it possible to effectively normalize the mandibular position, achieve orthognathic occlusion, eliminate bimaxillary protrusion and improve the face profile. This method significantly reduced invasiveness and time of orthodontic treatment.

A Prospective Study Comparing Adolescent and Post-Adolescent Periods Regarding Effects of Activator Appliance in Patients with Class II Mandibular Retrognathia by Using 3dMDface Analysis and Cephalometry.

BACKGROUND The purpose of this prospective study was to compare adolescent and post-adolescent growth periods regarding the effectiveness of conventional activator appliance in patients with Class II mandibular retrognathia by using lateral cephalometric radiographs and three-dimensional photogrammetry (3dMDface). MATERIAL AND METHODS We enrolled 2 groups: 15 patients in the adolescent growth period and 17 patients in the post-adolescent growth period. All patients had Class II anomaly with mandibular retrognathia and were treated with conventional activator appliances. Lateral cephalometric radiographs and three-dimensional photogrammetric views were obtained at the beginning and end of the activator treatment of Class II patients. Maxillomandibular discrepancy, mandibular protrusion and lengths, convexity angles, facial heights, and dental measurements were evaluated cephalometrically. Projections of the lips and the chin and volumetric measurements of the lip and the mandibular area were assessed using three-dimensional photogrammetry. RESULTS Conventional activator therapy resulted in similar effects in both growth periods regarding improvements in the mandibular sagittal growth and maxillomandibular relationship (ANB° and the SNB° angles). Mandibular effective length was increased (Co-Gn length) and the maxillary horizontal growth was restricted (decreased SNA° angle) in both groups following the treatment. Treatment duration was significantly longer in the post-adolescent group. Increases in the projections of menton, pogonion, and sublabial points were observed in the three-dimensional photogrammetric views. Total lip volume was reduced while the mandibular volume was significantly increased in both groups. Lower gonial angle showed a greater increase in the post-adolescent group. CONCLUSIONS Correction of Class II anomaly with mandibular retrognathia was achieved with a combination of dental and skeletal changes in both growth periods. Conventional activator therapy may be an alternative treatment approach in the late growth period as it led to significant skeletal and dental changes.

Measurement of inferior facial angle and prefrontal space ratio in first trimester fetuses with aneuploidies: a retrospective study.

Objective To determine whether the measurement of inferior facial angle (IFA) and prefrontal space ratio (PFSR) in two-dimensional (2D) ultrasound images in the first trimester of pregnancy is reliable and to describe these markers in normal and aneuploid fetuses. Methods IFA and PFSR were measured in stored 2D midsagittal images of 200 normal and 140 aneuploid fetal profiles between 11 + 0 and 13 + 6 weeks of gestation. Limits of agreement (LOAs) and intraclass correlation coefficients (ICCs) for inter- and intraobserver differences were calculated. Results The mean IFA in normal fetuses was 76.5° ± 6.3. Between the two measurement rounds of the same observer, the LOAs were -5.4 to 7.1 (obs. 1) and 7.4 to 8.4 (obs. 2). For IFA measurements by the same observer the ICC was 0.88 (obs. 1) and for measurements by two different observers the ICC was 0.74. The mean PFSR was 0.76 ± 0.40 and the intraobserver LOAs were -0.372 to 0.395 (obs. 1) and -0.555 to 0.667 (obs. 2). For PFSR measurements by the same observer the ICC was 0.89 (obs. 1) and for measurements by two different observers the ICC was 0.65. Among aneuploid fetuses, IFA was below the normal range in one third of the cases with trisomy 18. PFSR was below the 95% prediction limit in 16.2% of fetuses with trisomy 21% and 17.9% of fetuses with trisomy 18. Conclusion IFA can be reliably measured in 2D ultrasound images in the first trimester of pregnancy with a high interobserver agreement and may provide information about retrognathia associated with various syndromes and aneuploidies at early stages of pregnancy.

Growth and Development of Craniofacial Structures in Patients at Different Ages With Unrepaired Submucous Cleft Palate.

PURPOSE: Submucous cleft palate (SMCP) is a particular subtype of cleft palate deformity; research related to the craniofacial features of patients with SMCP is comparatively rare. The study objective was to perform a cephalometric comparison of the craniofacial features of patients with SMCP and non-cleft controls at different ages. MATERIALS AND METHODS: The sample in this cross-sectional study was composed of 2 groups: SMCP patients and non-cleft controls. The primary predictor variables were study group (cleft and non-cleft) and age. Age was divided into 3 groups. The outcome variables of interest were craniofacial measurements. The measurements used reflect cranial length, cranial angle, maxillary sagittal length and protrusion, maxillary vertical height, pharyngeal depth, facial height, mandibular length and protrusion, mandibular plane angle, and intermaxillary relation. Adjusted cephalometric craniofacial measurements between the groups were compared in 3 age groups using generalized linear models after being adjusted for age and gender. RESULTS: The study included 60 SMCP patients and 60 non-cleft controls. SMCP patients and non-cleft controls were divided into 3 subgroups: those aged 5 to 7 years, those aged 9 to 11 years, and those aged 18 to 30 years. Patients with SMCP at age 5 to 7 years showed a shortened cranial base length, maxillary sagittal length and height, and bony pharynx depth. Patients with SMCP at age 9 to 11 years showed a smaller maxillary sagittal length and bony pharynx depth and an inharmonious jaw relationship. Patients with SMCP at age 18 to 30 years showed a smaller maxillary sagittal length and height and an inharmonious jaw relationship. CONCLUSIONS: SMCP is associated with progressive maxillary retrognathism and reduced profile convexity from childhood to adulthood.

Determining the Patient-Specific Optimum Osteotomy Line for Severe Mandibular Retrognathia Patients.

PURPOSE: The purpose of this study is to suggest a patient-specific osteotomy line to optimize the distractor position and thus to minimize the disadvantages of conventional mandibular distraction osteogenesis (MDO) protocols. In addition, this study also aims to compare the conventional MDO protocols with the new MDO protocol proposed in this study in terms of both orthodontic outcomes and mechanical effects of osteotomy level on callus stabilization by means of the finite element method. METHODS: A preoperative patient-specific 3-dimensional bone model was created and segmented by using computed tomography images of an individual patient. Virtual orthodontic set-up was applied to the segmented model prior to the virtual surgery. In order to compare the proposed osteotomy line with the conventional lines used in clinical applications, virtual surgery simulations were performed and callus tissues were modelled for each scenario. The comparison of the success of each osteotomy line was carried out based on the occlusion of the teeth. RESULTS: The osteotomy line determined using the method proposed in this study has resulted in far less malocclusion than the conventional method. Namely, any angular deviation from the optimum osteotomy line determined in this study might result in deep-bite or open-bite. On the other hand, the finite element analysis results have indicated that this deviation also negatively affects the callus stability. CONCLUSION: In order to achieve a better MDO treatment in terms of occlusion of the teeth and the callus stability, the location of the osteotomy line and the distractor position can be computationally determined. The results suggest that MDO protocol developed in this study might be used in clinic to achieve a better outcome from the MDO treatment.

Three-dimensional computed tomography analysis of mandibular morphology in patients with facial asymmetry and mandibular retrognathism.

INTRODUCTION: The purpose of this study was to analyze the morphologic features of skeletal units in the mandibles of patients with facial asymmetry and mandibular retrognathism using cone-beam computed tomography. METHODS: The subjects consisted of 50 adults with facial asymmetry and mandibular retrognathism, divided into the symmetry group (n = 25) and the asymmetry group (n = 25) according to the degree of menton deviation. Three-dimensional computed tomography scans were obtained with cone beam computed tomography. Landmarks were designated on the reconstructed 3-dimensional images. Linear and volumetric measurements were made on the mandibles. RESULTS: In the asymmetry group, the lengths of condylar, body, and coronoid units were shorter, and condylar width was narrower on the deviated side than on the nondeviated side (P <0.01). The lengths of angular and chin units were not significantly different between the deviated and nondeviated sides (P >0.05). Hemimandibular, ramal, and body volumes were less on the deviated side than on the nondeviated side (P <0.01). CONCLUSIONS: Condylar, body, and coronoid units contribute to mandibular asymmetry in patients with facial asymmetry and mandibular retrognathism.

Improvement of facial profile by nonextraction orthodontic treatment with temporary skeletal anchorage devices and visual treatment objectives.

A 15-year-old girl with a convex profile and a retrognathic chin was referred for improvement of her profile. Nonextraction orthodontic therapy with temporary skeletal anchorage devices was used to improve her facial balance in a total active treatment time of 26 months. Her occlusion and profile were significantly improved by the treatment. Posttreatment records after 12 months showed excellent results with good occlusion and facial harmony.

Nonsurgical treatment of Brodie bite assisted by 3-dimensional planning and assessment.

This case report describes the nonsurgical treatment of an adolescent patient with a severe transverse discrepancy presented as a Brodie bite and retrognathic mandible. Distraction osteogenesis has been often used for similar cases in the literature. However, in this patient, a fixed appliance with 1 maxillary extraction combined with a functional appliance was used to resolve the transverse discrepancy with natural growth. After the orthodontic treatment, the impinging teeth and Brodie bite were corrected with a favorable occlusion and profile. Retention at the 3-year follow-up showed improved occlusal interdigitation and good stability.

Nonsurgical correction using miniscrew-assisted vertical control of a severe high angle with mandibular retrusion and gummy smile in an adult.

Orthodontic treatment in adult patients with a skeletal discrepancy can be challenging. In this case report, we achieved both sagittal and vertical control by combining the classic sliding mechanics straight-wire technique with miniscrew anchorage. We treated a 21-year-old Chinese woman with a severe high mandibular plane angle, a retrusive chin, and a gummy smile. Her diagnosis included a skeletal Class II skull base with a mild anterior open bite, a protrusive maxilla, and a backwardly rotated mandible. This case underscores the importance of anchorage control in both the sagittal and vertical directions. First, we used miniscrews in the maxillary and mandibular buccal segments to obtain rigid anchorage. Next, we achieved good anterior and posterior vertical control with miniscrews in the maxillary anterior labial and posterior buccolingual segments. Intrusion of the maxillary molars contributed to deepening of the anterior overbite and counterclockwise rotation of the mandibular plane, which, in turn, improved the facial profile. Intrusion of the maxillary incisors contributed to correction of the gummy smile. After 1 year of retention, the patient had a stable, well-aligned dentition with ideal intercuspation and an improved facial contour. Our results thus suggest that placement of miniscrews in the anterior and posterior regions of the maxilla is effective for camouflaging a high-angle skeletal Class II defect. This technique requires minimal patient compliance and is particularly useful for correction of a high angle in an adult with a gummy smile.

Fixed-functional appliance treatment combined with growth hormone therapy.

The purpose of this study was to illustrate the effects of growth hormone (GH) therapy and fixed functional appliance treatment in a 13-year-old Class II malocclusion patient without GH deficiency. GH has been shown to effectively increase endochondral growth and induce a more prognathic skeletal pattern. Although a major concern in Class II retrognathic patients is chin deficiency, long-term studies have shown that the mandibular growth enhancement effects of functional appliances are clinically insignificant. This case report demonstrates that the mandible grew significantly during fixed functional appliance treatment combined with GH therapy, with stable results during 2 years 11 months of retention. More studies are needed to evaluate GH therapy as a supplement in Class II treatment.

Timing of Surgical Removal of Odontoma in a Growing Orthodontic Patient: A Case Report.

In patients with skeletal malocclusion and odontoma, the prioritization of treatment is ofgreat importance. Ifsurgical removal of odontoma is postponed, the probability of adjacent teeth impaction increases. In this case, skeletal treatment was performed before odontoma rgery due to concerns about facial appearance and the patient's fear of surgery, and therefore adjacent tooth failed to erupt.

Frontal space distance in facial clefts and retrognathia at 11-13 weeks' gestation.

OBJECTIVE: To examine the frontal space (FS) distance in first-trimester fetuses with bilateral, unilateral or median cleft lip and palate and in those with retrognathia. METHODS: This was a retrospective study using stored two-dimensional ultrasound images of fetal profiles that were recorded at the time of the nuchal translucency (NT) scan at three prenatal medical centers. Images of 300 normal fetuses and 53 fetuses with facial defects were obtained. To measure the FS distance, a line was drawn between the anterior edge of the mental protuberance of the mandible and anterior edge of the maxilla (MM line) and extended upwards in front of the forehead. The perpendicular distance (FS distance) between the MM line and the skin at the point of largest excursion of the fetal forehead was measured. In cases in which the MM line was located anteriorly to the forehead, the distance was measured in the same fashion but was multiplied by -1. Two operators measured the FS distance twice, independently of each other. FS distances were transformed into Z-scores based on the linear relationship with crown-rump length (CRL) in normal fetuses. The distribution of FS distances in fetuses with bilateral, unilateral or median cleft lip and palate and those with retrognathia were compared with that in the normal group using Student's t-test. RESULTS: A search of the centers' databases identified 53 abnormal cases including 20, nine and eight with a bilateral, unilateral and median cleft lip and palate, respectively, and 16 cases of retrognathia. In fetuses with bilateral, unilateral and median clefts and those with retrognathia, median delta NT was 1.00 mm, 0.37 mm, 4.00 mm and 0.26 mm, respectively. Among these affected groups, 12 (60.0%), six (66.7%), two (25.0%) and eight (50.0%) fetuses had an abnormal karyotype. In the normal population, FS distance was dependent on CRL measurement (FS = 6.62 - (0.08 × CRL); r = -0.539; P < 0.0001). In fetuses with a bilateral and median cleft and in those with retrognathia, FS distance was significantly different from that in the normal population (all P < 0.0001), however, the difference was not significant in fetuses with unilateral clefts (P = 0.103). The respective Z-scores of FS distance for fetuses with bilateral, unilateral and median clefts and retrognathia were -9.7 ± 2.0, -3.1 ± 5.1, 8.2 ± 3.4 and -7.3 ± 2.3. Measurements were ≥ 99(th) and ≤ 1(st) centiles in all but one (98.1%) case. CONCLUSION: The FS distance appears to be a helpful tool in the detection of facial clefts at 11-13 weeks' gestation. Copyright © 2015 ISUOG. Published by John Wiley & Sons Ltd.

The performance of an intermediate 16th-week ultrasound scan for the follow-up of euploid fetuses with increased nuchal translucency.

OBJECTIVE: The objective of the study is to assess the utility of an intermediate ultrasound scan at 16(+0) to 18(+6) weeks of gestation in euploid fetuses with increased nuchal translucency ≥ 3.5 mm. METHODS: Three hundred eighty-nine fetuses with nuchal translucency (NT) ≥ 3.5 mm were identified in two prenatal centers between January 2008 and December 2012. Pregnancy work-up included karyotyping, monthly detailed ultrasound scan starting with a 16th-week scan, a cardioechography, and a genetic counseling. Abnormal findings and pregnancy outcomes were analyzed retrospectively. RESULTS: Of the 389 fetuses included, 52% had normal karyotype. Among euploid fetuses, 51 (30.7%) structural defects were identified overall. First-trimester scan was useful to identify 16 of the major defects (31.3%), and the 16th-week scan was useful to identify an additional 21 of them (41.2%), whereas the 22nd-week pregnancy scan discovered an additional 14 (27.4%). Structural defects discovered with the 16th-week scan were cardiac defects (n = 7), polymalformative syndromes (n = 3), left diaphragmatic hernias (n = 3), limbs abnormalities (n = 2), genitourinary (n = 2), microretrognathism (n = 2), hydrops (n = 1), and exomphalos (n = 1). If the intermediate scan was normal, the chances of a favorable outcome were as high as 85% and were close to 100% after 20 weeks, irrespective of initial NT. CONCLUSION: The intermediate ultrasound was useful in fetuses with increased NT pregnancy work-up.

Anatomical position of the mandibular canal in relation to the buccal cortical bone in Chinese patients with different dentofacial relationships.

BACKGROUND/PURPOSE: The purpose of this study was to determine the position of the mandibular canal in relation to the buccal cortical bone in Chinese patients with three dentofacial relationships: normal dentition, retrognathism, and prognathism. METHODS: Cone-beam computed tomography and lateral cephalograms of patients with normal dentation, retrognathism, and prognathism (n = 32 each group) were reviewed. Measurements of the shortest distance from the outer/buccal edge of the mandibular canal to the inner surface of the buccal cortex, and the distance from the lingula of the ramus to the dorsal root of the first molar were recorded. RESULTS: No significant difference was observed between the three groups in the distribution of contact or fusion of the mandibular canal, or in the course of the mandibular canal on the right or left side. When the shortest distance at the lingula on the left side was >2.1 mm, no instances of contact or fusion were observed. On the right side, 100% of the patients had no contact or fusion when the shortest distance was >2.7 mm at the lingula. CONCLUSION: The shortest distance from the outer/buccal edge of the mandibular canal to the inner surface of the buccal cortex measured at the lingula can predict contact or fusion. During sagittal split ramus osteotomy, great care should be observed at the point halfway between the lingula and the anterior ramus border where the inferior alveolar nerve is the closest to the cortical bone.