Bioprinting for the Biologist.

Building tissues from scratch to explore entirely new cell configurations could revolutionize fundamental understanding in biology. Bioprinting is an emerging technology to do this. Although typically applied to engineer tissues for therapeutic tissue repair or drug screening, there are many opportunities for bioprinting within biology, such as for exploring cellular crosstalk or cellular morphogenesis. The overall goals of this Primer are to provide an overview of bioprinting with the biologist in mind, outline the steps in extrusion bioprinting (the most widely used and accessible technology), and discuss alternative bioprinting technologies and future opportunities for bioprinting in biology.

High conductivity Sepia melanin ink films for environmentally benign printed electronics.

Melanins (from the Greek µÎ­λας, mélas, black) are bio-pigments ubiquitous in flora and fauna. Eumelanin is an insoluble brown-black type of melanin, found in vertebrates and invertebrates alike, among which Sepia (cuttlefish) is noteworthy. Sepia melanin is a type of bio-sourced eumelanin that can readily be extracted from the ink sac of cuttlefish. Eumelanin features broadband optical absorption, metal-binding affinity and antioxidative and radical-scavenging properties. It is a prototype of benign material for sustainable organic electronics technologies. Here, we report on an electronic conductivity as high as 10-3 S cm-1 in flexographically printed Sepia melanin films; such values for the conductivity are typical for well-established high-performance organic electronic polymers but quite uncommon for bio-sourced organic materials. Our studies show the potential of bio-sourced materials for emerging electronic technologies with low human- and eco-toxicity.

Macrophage-like rapid uptake and toxicity of tattoo ink in human monocytes.

Macrophages play a critical role for the persistence of tattoo ink in human skin. However, a comparison to other skin-resident and blood circulating immune cells and a profound analysis of REACH-compliant tattoo ink are unmet medical needs. We hence characterized the size distribution of ink particles using physicochemical methods. We studied the uptake of tattoo ink by key human skin cells and blood-derived immune cells using optical and electron microscopy as well as flow cytometry. Scanning electron microscopy of ink revealed its crystalline structure, and a tendency towards aggregations was indicated by size changes upon diluting it. Flow cytometric analyses of skin and immune cells after incubation with tattoo ink demonstrated an increase in cellular granularity upon uptake and red ink additionally evoked fluorescent signals. Human macrophages were most potent in internalizing ink in full thickness 3D skin models. Macrophage cultures demonstrated that the ink did not lead to elevated inflammatory mediators, and showed no indications for toxicity, even after nice days. Strikingly, monocytes were most efficient in ink uptake, but displayed reduced viability, whereas granulocytes and lymphocytes showed only temporary ink uptake with flow cytometric signals declining after 1 day. Mechanistic studies on ink retention by corticosteroids or dexpanthenol in macrophage cultures demonstrated that these compounds do not lead to ink excretion, but even slightly increase the ink load in macrophages. The highly motile monocytes, precursors of macrophages, may play an underrated role for tattoo ink translocation from dermal blood vessels into internal organs.

What's in My Ink: An Analysis of Commercial Tattoo Ink on the US Market.

As tattoos continue to rise in popularity, the demand for tattoo ink has surged. Historically, tattoo inks have been underregulated in the US market. This study analyzes inks from nine different brands that are common in the United States, ranging from major to small manufacturers. Out of 54 inks, 45 contained unlisted additives and/or pigments. Major, unlisted adulterants include poly(ethylene glycol), propylene glycol, and higher alkanes. Many of the adulterants pose possible allergic or other health risks. Taken together, the results from this study highlight the potential for a significant issue around inaccurate tattoo ink labeling in the United States.

4D-Printable Photocrosslinkable Polyurethane-Based Inks for Tissue Scaffold and Actuator Applications.

4D printing recently emerges as an exciting evolution of conventional 3D printing, where a printed construct can quickly transform in response to a specific stimulus to switch between a temporary variable state and an original state. In this work, a photocrosslinkable polyethylene-glycol polyurethane ink is synthesized for light-assisted 4D printing of smart materials. The molecular weight distribution of the ink monomers is tunable by adjusting the copolymerization reaction time. Digital light processing (DLP) technique is used to program a differential swelling response in the printed constructs after humidity variation. Bioactive microparticles are embedded into the ink and the improvement of biocompatibility of the printed constructs is demonstrated for tissue engineering applications. Cell studies reveal above 90% viability in 1 week and ≈50% biodegradability after 4 weeks. Self-folding capillary scaffolds, dynamic grippers, and film actuators are made and activated in a humid environment. The approach offers a versatile platform for the fabrication of complex constructs. The ink can be used in tissue engineering and actuator applications, making the ink a promising avenue for future research.

Porous Microneedles Through Direct Ink Drawing with Nanocomposite Inks for Transdermal Collection of Interstitial Fluid.

Interstitial fluid (ISF) is an attractive alternative to regular blood sampling for health checks and disease diagnosis. Porous microneedles (MNs) are well suited for collecting ISF in a minimally invasive manner. However, traditional methods of molding MNs from microfabricated templates involve prohibitive fabrication costs and fixed designs. To overcome these limitations, this study presents a facile and economical additive manufacturing approach to create porous MNs. Compared to traditional layerwise build sequences, direct ink drawing with nanocomposite inks can define sharp MNs with tailored shapes and achieve vastly improved fabrication efficiency. The key to this fabrication strategy is the yield-stress fluid ink that is easily formulated by dispersing silica nanoparticles into the cellulose acetate polymer solution. As-printed MNs are solidified into interconnected porous microstructure inside a coagulation bath of deionized water. The resulting MNs exhibit high mechanical strength and high porosity. This approach also allows porous MNs to be easily integrated on various substrates. In particular, MNs on filter paper substrates are highly flexible to rapidly collect ISF on non-flat skin sites. The extracted ISF is used for quantitative analysis of biomarkers, including glucose, = calcium ions, and calcium ions. Overall, the developments allow facile fabrication of porous MNs for transdermal diagnosis and therapy.

Detection of anaerobic and aerobic bacteria from commercial tattoo and permanent makeup inks.

Tattooing and use of permanent makeup (PMU) have dramatically increased over the last decade, with a concomitant increase in ink-related infections. Studies have shown evidence that commercial tattoo and PMU inks are frequently contaminated with pathogenic microorganisms. Considering that tattoo inks are placed into the dermal layer of the skin where anaerobic bacteria can thrive and cause infections in low-oxygen environments, the prevalence of anaerobic and aerobic bacteria should be assessed in tattoo and PMU inks. In this study, we tested 75 tattoo and PMU inks using the analytical methods described in the FDA Bacteriological Analytical Manual Chapter 23 for the detection of both aerobic and anaerobic bacterial contamination, followed by 16S rRNA gene sequencing for microbial identification. Of 75 ink samples, we found 26 contaminated samples with 34 bacterial isolates taxonomically classified into 14 genera and 22 species. Among the 34 bacterial isolates, 19 were identified as possibly pathogenic bacterial strains. Two species, namely Cutibacterium acnes (four strains) and Staphylococcus epidermidis (two strains) were isolated under anaerobic conditions. Two possibly pathogenic bacterial strains, Staphylococcus saprophyticus and C. acnes, were isolated together from the same ink samples (n = 2), indicating that tattoo and PMU inks can contain both aerobic (S. saprophyticus) and anaerobic bacteria (C. acnes). No significant association was found between sterility claims on the ink label and the absence of bacterial contamination. The results indicate that tattoo and PMU inks can also contain anaerobic bacteria. IMPORTANCE: The rising popularity of tattooing and permanent makeup (PMU) has led to increased reports of ink-related infections. This study is the first to investigate the presence of both aerobic and anaerobic bacteria in commercial tattoo and PMU inks under aerobic and anaerobic conditions. Our findings reveal that unopened and sealed tattoo inks can harbor anaerobic bacteria, known to thrive in low-oxygen environments, such as the dermal layer of the skin, alongside aerobic bacteria. This suggests that contaminated tattoo inks could be a source of infection from both types of bacteria. The results emphasize the importance of monitoring these products for both aerobic and anaerobic bacteria, including possibly pathogenic microorganisms.

Biodistribution of iron oxide tattoo pigment: An experimental murine study.

Tattoo pigment is expected to migrate beyond the skin to regional lymph nodes and the liver. Modern tattoo ink commonly contains metals that may pose a clinical problem during MRI examinations. This study aimed to investigate the biodistribution of iron oxide pigment to internal organs in mice. Moreover, when exposed to a static magnetic field, we studied whether any reactions followed in the tattooed skin. Twenty-seven hairless C3.Cg-Hrhr/TifBomTac mice were included; 20 were tattooed with iron oxide ink in a rectangular 3 cm2 pattern; seven were controls. Ten of the tattooed mice were exposed to a 3 T MRI scanner's static magnetic field. Following euthanasia, evaluations of dissected organs involved MRI T2*-mapping, light microscopy (LM) and metal analysis. T2*-mapping measures the relaxation times of hydrogen nuclei in water and fat, which may be affected by neighbouring ferrimagnetic particles, thus enabling the detection of iron oxide particles in organs. Elemental analysis detected a significant level of metals in the tattooed skin compared to controls, but no skin reactions occurred when exposed to a 3 T static magnetic field. No disparity was observed in the liver samples with metal analysis. T2* mapping found no significant difference between the two groups. Only minute clusters of pigment particles were observed in the liver by LM. Our results demonstrate a minimal systemic distribution of the iron oxide pigments to the liver, whereas the kidney and brain were unaffected. The static magnetic field did not trigger skin reactions in magnetic tattoos but may induce image artefacts during MRI.

The effects of pen ink and surface disinfectants on red blood cells stored in plasticized polyvinylchloride transfusion bags.

BACKGROUND: Each unit of red blood cells (RBCs) produced represents a significant cost to the healthcare system. Unnecessary blood wastage should be minimized. In clinical settings, alterations to blood component bags after issue from the protected setting of the blood bank include pen markings, and those that are exposed to an infectious environment require surface disinfecting. These units may be discarded due to unclear effects on RBC quality. In this study, we investigate whether pen markings or surface disinfection negatively affects the quality of packed RBCs and whether pen ink diffuses through the blood bag. STUDY DESIGN AND METHODS: RBC bags were marked with pens (water, oil, or alcohol-based) or subjected to surface disinfection (ethanol, hydrogen peroxide [Preempt wipes], or benzalkonium chloride-based wipes [CaviWipes]) and sampled 24 h after applying the treatment and at day 42 post collection (n = 3 for each condition). The samples were analyzed for RBC in vitro quality markers. The presence of any ink in the RBC bags was investigated using mass spectrometry (n = 2). RESULTS: Data from 24 h and day 42 time points indicated no differences in RBC count, mean corpuscular volume, morphology, deformability, potassium content, or hemolysis for either pen markings or disinfectants when compared with their untreated controls (p > .05). No trace of ink was detected inside the bag. CONCLUSION: RBC units marked with ballpoint, gel, or Sharpie pens do not suffer a loss of in vitro quality, nor do RBC units which have been surface disinfected with 70% ethanol, Preempt wipes or CaviWipes.

Single-Component Cellulose Acetate Sulfate Hydrogels for Direct Ink Writing 3D Printing.

Hydrogels, typically favored for 3D printing due to their viscoelasticity, are now trending toward ecofriendly alternatives amid growing environmental concerns. In this study, we crafted cellulose-based hydrogels, specifically employing cellulose acetate sulfate (CAS). By keeping the acetyl group substitution degree (DSacetyl = 1.8) and CAS molecular weight constant, we varied rheological properties by adjusting sulfate group substitution (DSsulfate = 0.4, 0.7, and 1.0) and CAS concentration (2-5 wt %). Rheological characterizations, including shear-thinning, yield stress, and thixotropy, were performed to identify optimal conditions for formulating CAS hydrogel ink in direct ink writing for 3D printing under selected experimental conditions. Based on rheological findings, CAS hydrogels with DSsulfate 0.7 and concentration of 4 wt % was used for 3D printing, with subsequent evaluation of printing metrics. Additionally, the effect of ionic cross-linking using Ca2+ ions on the structural integrity of 3D-printed structures was evaluated, demonstrating effective preservation through reinforced polymer networks. The shrinking and swelling behaviors of the 3D-printed structures were also significantly affected by this ionic cross-linking. Building on these findings, this work could broaden the range of cellulose derivatives available for the preparation of cellulose-based hydrogels for 3D printing.

Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status.

Tissue engineering for injured tissue replacement and regeneration has been a subject of investigation over the last 30 years, and there has been considerable interest in using additive manufacturing to achieve these goals. Despite such efforts, many key questions remain unanswered, particularly in the area of biomaterial selection for these applications as well as quantitative understanding of the process science. The strategic utilization of biological macromolecules provides a versatile approach to meet diverse requirements in 3D printing, such as printability, buildability, and biocompatibility. These molecules play a pivotal role in both physical and chemical cross-linking processes throughout the biofabrication, contributing significantly to the overall success of the 3D printing process. Among the several bioprintable materials, gelatin methacryloyl (GelMA) has been widely utilized for diverse tissue engineering applications, with some degree of success. In this context, this review will discuss the key bioengineering approaches to identify the gelation and cross-linking strategies that are appropriate to control the rheology, printability, and buildability of biomaterial inks. This review will focus on the GelMA as the structural (scaffold) biomaterial for different tissues and as a potential carrier vehicle for the transport of living cells as well as their maintenance and viability in the physiological system. Recognizing the importance of printability toward shape fidelity and biophysical properties, a major focus in this review has been to discuss the qualitative and quantitative impact of the key factors, including microrheological, viscoelastic, gelation, shear thinning properties of biomaterial inks, and printing parameters, in particular, reference to 3D extrusion printing of GelMA-based biomaterial inks. Specifically, we emphasize the different possibilities to regulate mechanical, swelling, biodegradation, and cellular functionalities of GelMA-based bio(material) inks, by hybridization techniques, including different synthetic and natural biopolymers, inorganic nanofillers, and microcarriers. At the close, the potential possibility of the integration of experimental data sets and artificial intelligence/machine learning approaches is emphasized to predict the printability, shape fidelity, or biophysical properties of GelMA bio(material) inks for clinically relevant tissues.

Injectable Thermogelling Nanostructured Ink as Simultaneous Optical and Magnetic Resonance Imaging Contrast Agent for Image-Guided Surgery.

The development of efficient and biocompatible contrast agents is particularly urgent for modern clinical surgery. Nanostructured materials raised great interest as contrast agents for different imaging techniques, for which essential features are high contrasts, and in the case of precise clinical surgery, minimization of the signal spatial dispersion when embedded in biological tissues. This study deals with the development of a multimodal contrast agent based on an injectable hydrogel nanocomposite containing a lanthanide-activated layered double hydroxide coupled to a biocompatible dye (indocyanine green), emitting in the first biological window. This novel nanostructured thermogelling hydrogel behaves as an efficient tissue marker for optical and magnetic resonance imaging because the particular formulation strongly limits its spatial diffusion in biological tissue by exploiting a simple injection. The synergistic combination of these properties permits to employ the hydrogel ink simultaneously for both optical and magnetic resonance imaging, easy monitoring of the biological target, and, at the same time, increasing the spatial resolution during a clinical surgery. The biocompatibility and excellent performance as contrast agents are very promising for possible use in image-guided surgery, which is currently one of the most challenging topics in clinical research.

Biodegradable Tyramine Functional Gelatin/6 Arms-PLA Inks Compatible with 3D Two Photon-Polymerization Printing and Meniscus Tissue Regeneration.

The meniscus regeneration can present major challenges such as mimicking tissue microstructuration or triggering cell regeneration. In the case of lesions that require a personalized approach, photoprinting offers the possibility of designing resolutive biomaterial structures. The photo-cross-linkable ink composition determines the process ease and the final network properties. In this study, we designed a range of hybrid inks composed of gelatin(G) and 6-PLA arms(P) that were photo-cross-linked using tyramine groups. The photo-cross-linking efficiency, mechanical properties, degradation, and biological interactions of inks with different G/P mass ratios were studied. The G50P50 network properties were suitable for meniscus regeneration, with Young's modulus of 6.5 MPa, degradation in 2 months, and good cell proliferation. We then confirmed the potential of these inks to produce high-resolution microstructures by printing well-defined microstructures using two-photon polymerization. These hybrid inks offer new perspectives for biocompatible, degradable, and microstructured tissue engineering scaffold creation.

Identification of the pigments used in permanent makeup and their ability to elicit allergic contact dermatitis.

BACKGROUND: Decorative tattoos are known to contain ingredients that may elicit allergic contact dermatitis; it is less well-known if permanent makeup pigments carry the same risk. OBJECTIVE: Identify pigments used in permanent makeup inks sold in the United States and review cases of allergic contact dermatitis to these pigments. METHODS: Using internet searches, permanent makeup inks sold in the United States were identified. Safety data sheets were used to catalog pigments used in permanent makeup. A subsequent literature search was performed to identify cases of allergic contact dermatitis to these pigments. RESULTS: A total of 974 permanent makeup inks were reviewed, and 79 unique pigments were identified. The average product contained 4 pigments. Twenty of the pigments were inorganic metals, including carbon, iron, chromium, manganese, and molybdenum. Fifty-nine pigments were organic, of which most were azo, quinacridone, or anthraquinone dyes. A literature search revealed that 10 of the 79 pigments were associated with allergic contact dermatitis. CONCLUSION: Permanent makeup primarily uses organic pigments, although some metallic pigments are still used. Physicians should also be aware that some of these pigments-both organic and inorganic-are known causes of allergic contact dermatitis. Of note, patch testing to these ingredients can be negative.

Engineering natural based nanocomposite inks via interface interaction for extrusion 3D printing.

Nanocomposites and low-viscous materials lack translation in additive manufacturing technologies due to deficiency in rheological requirements and heterogeneity of their preparation. This work proposes the chemical crosslinking between composing phases as a universal approach for mitigating such issues. The model system is composed of amine-functionalized bioactive glass nanoparticles (BGNP) and light-responsive methacrylated bovine serum albumin (BSAMA) which further allows post-print photocrosslinking. The interfacial interaction was conducted by 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide crosslinking agent and N-Hydroxysuccinimide between BGNP-grafted amines and BSAMA's carboxylic groups. Different chemical crosslinking amounts and percentages of BGNP in the nanocomposites were tested. The improved interface interactions increased the elastic and viscous modulus of all formulations. More pronounced increases were found with the highest crosslinking agent amounts (4 % w/v) and BGNP concentrations (10 % w/w). This formulation also displayed the highest Young's modulus of the double-crosslinked construct. All composite formulations could effectively immobilize the BGNP and turn an extremely low viscous material into an appropriate inks for 3d printing technologies, attesting for the systems' tunability. Thus, we describe a versatile methodology which can successfully render tunable and light-responsive nanocomposite inks with homogeneously distributed bioactive fillers. This system can further reproducibly recapitulate phases of other natures, broadening applicability.

Tattoo inks: evaluation of cellular responses and analysis of some trace metals.

After tattoo application, inks remain in the skin, mostly in the dermal layer, and manufacturers use inks that have not been adequately evaluated for safety in tattoo production. In this study, the metal contents (Cd, Hg, Pb, and Cr) of tattoo inks available in the Turkish market were determined and the relationship between cell viability and inflammatory response of the detected metal levels was investigated. Nine tattoo inks (3 colors) from 3 different brands abbreviated as E, I, and W were examined. ICP-MS was used for element analysis. The viability of human keratinocyte cells was determined by the WST-1 assay following ink exposures at various dilutions. IL-18 levels were measured in cell culture supernatant by ELISA method following ink or metal (Cd, Cr, Hg, and Pb) exposures. The concentrations of trace elements were found in inks as follows: Cd, 0.0641-1.3857; Hg, 0.0204-0.2675; Pb, 0.8527-6.5981; Cr, 0.1731-45.3962 µg mL-1. It was observed that the levels of Pb and especially Cr in the samples exceeded the limit values. Tattoo inks reduced the cell viability in a dose- and color-dependent manner. IL-18 release was significantly increased in all groups except Cr and black ink of brand I treated cells (p < 0.05). Our results show that the metal contents of tattoo inks exceed Council of Europe Resolution values in some samples and some inks induce immune system activation (IL-18 secretion) and cytotoxic effects. It is thought that these findings may contribute to the toxic/adverse effects of tattoo inks commonly used.

Application of Indian ink markers for locating gastric varices under endoscopic ultrasonography.

OBJECTIVE: The present study aimed to investigate the accuracy of endoscopic ultrasonography (EUS) combined with Indian ink in locating target vessels of gastric varices (GVs) compared with conventional endoscopic techniques. Additionally, the characteristics of GVs under conventional endoscopy were also explored. METHODS: All 50 cirrhotic patients with GVs between August 2021 and December 2022 were included in the study. Firstly, conventional endoscopy was employed to identify GVs and to record the expected injection sites. Subsequently, EUS was used to locate the perforated vessel and the injection site was them marked with India ink followed by injection with cyanoacrylate (CYA). Finally, conventional endoscopy was used to examine GVs, to identify the marker points of Indian ink and to compare whether the injection points under conventional endoscopy were consistent with those marked with Indian ink. Furthermore, patients with consistent and inconsistent distribution of endoscopic markers and injection sites were divided into two groups. RESULTS: EUS could detect the perforating vessels in real time and intuitively. The distribution of markers using EUS was significantly different compared with the injection points obtained by conventional endoscopy (P < 0.001). Therefore, 20 cases were allocated to the consistent group and 30 cases to the non-consistent group. 16 patients who showed red wale signs were obtained in the consistent group and 11 patients in the non-consistent group (P = 0.048). The diameter of the largest GVs was 13.5 (10-15) mm in the consistent group compared with 10 (7.5-10) mm in the non-consistent group (P = 0.006). CONCLUSION: EUS could provide the exact location of GVs, thus more accurately describing the endoscopic characteristics of the GVs. Furthermore, the red wale signs and diameter of the largest GVs obtained using conventional endoscopy were helpful in determining the location of target GVs.

The Process of Sterilizing Tattoo Inks Releases Formaldehyde.

INTRODUCTION: Around 12% of Europeans and 20% of Americans have at least one tattoo. Tattoo inks, the substances used to create tattoos on the body, consist of chemicals that contain formaldehyde, which can be harmful to human health. The amount of formaldehyde present in commercially available tattoo inks and its causes are not well understood. METHODS: We investigated the levels of formaldehyde in tattoo ink products sold in different countries and identified the factors contributing to its production. We also explored methods to reduce formaldehyde generation in tattoo inks. Seven tattoo inks from various brands were tested. RESULTS: Formaldehyde release was predominantly associated with gamma radiation sterilization. Formaldehyde levels were observed to be higher in compositions containing organic components compared to those with inorganic components, irrespective of sterilization method and container type. Glycerin released over seven times more formaldehyde than other components during gamma-ray sterilization. CONCLUSION: The results suggest that the presence of hydroxyl groups in carbon organic compounds in tattoo ink leads to photodegradation during gamma-ray radiation sterilization, resulting in increased concentrations of formaldehyde. Further research is needed to examine the chemical reactions occurring during sterilization processes and identify alternative sterilization methods that minimize formaldehyde formation. Additionally, the development of tattoo inks with reduced formaldehyde content and the establishment of strict quality control measures can help ensure the safety of tattooing practices.

Tattoo Pigment Biokinetics in vivo in a 28-Day Porcine Model: Elements Undergo Fast Distribution to Lymph Nodes and Reach Steady State after 7 Days.

INTRODUCTION: Pigments of tattoo inks may over time migrate to other parts of the body. Inks kinetics are still poorly understood and little studied. The aim of this first study was to investigate the kinetics of tattoo inks pigment in tattooed porcine skin, which is closer to human skin than mouse skin studied in the past. METHODS: Three animals were tattooed on the inner thigh and one animal served as untreated control. Skin biopsies were taken on days 7, 14, and 28 after tattooing. Animals were sacrificed on day 28 and homogenate samples of the liver, spleen, kidney, and brain, as well the local lymph nodes were prepared. All samples were analyzed for ink components using inductively coupled plasma-mass spectrometry. The ink itself was characterized by dynamic light scattering and matrix-assisted laser desorption-ionization mass analysis. RESULTS: Titanium (212 g/kg), copper (6 mg/kg), aluminum (1 mg/kg), zirconium (1 mg/kg), and chromium (3 mg/kg) were found in the ink. Significant deposits of ink elements were detected in the tattooed skin when compared to non-tattooed skin from the same animal (mean ± standard deviation: titanium 240 ± 81 mg/kg, copper 95 ± 39 mg/kg, aluminum 115 ± 63 mg/kg, zirconium 23 ± 12 mg/kg, and chromium 1.0 ± 0.2 mg/kg; p < 0.05). Lymph node concentrations of titanium, copper, aluminum, zirconium, and chromium were 42 ± 2 mg/kg, 69 ± 25 mg/kg, 49 ± 18 mg/kg, 0.3 ± 0.2 mg/kg, 0.5 ± 0.2 mg/kg, respectively. CONCLUSION: Deposits in skin were unchanged from days 7-28 indicating no redistribution or elimination. No significant deposits of ink elements were found in the liver, spleen, kidney, and brain. In conclusion, our findings confirmed distribution of elements from tattoos to regional lymph nodes, but neither to excretory organs, e.g., liver and kidney, nor to spleen and brain. Thus systemic internal organ exposure was not found.