Nutritionally Valuable Components and Heat-Induced Contaminants in Extruded Snack Products Enriched with Defatted Press Cakes.

This research studies the influence of the addition of defatted press cakes (from the production of hazelnut, camelina, pumpkin, and hemp seed oil) on nutritionally important components: fibre, resistant starch, polyphenols, hydroxymethylfurfural (HMF), and acrylamide in directly and indirectly expanded snacks. The amounts of press cakes added to corn grits were 3, 6, and 9%. Extrusion was carried out in a laboratory single-screw extruder. For indirectly expanded products (SCFX), supercritical CO2 was injected during extrusion, and secondary expansion was completed in the microwave oven. The type and content of press cake, as well as the type of product, significantly influenced total polyphenol content and antioxidant activity. Press cakes increased the contents of both soluble and insoluble fibre (from 1.94% d. m. and 1.28% d. m. for extrudates without press cakes up to 3.17% d. m. and 6.94% d. m. for SCFX extrudates with press cakes, respectively), and resistant starch was not markedly influenced by their addition. The influence of the content of press cake on HMF was not significant, whereas the type of cake and the type of extrusion influenced HMF significantly. In a raw mixture of corn grits with 3% of pumpkin press cake, HMF was below the limit of detection, and the highest content was found in the classically extruded sample with the addition of 9% of camelina press cake (580 ppb). In all samples, the acrylamide content was below the limit of detection, indicating that safe products were obtained. This research shows potential for the implementation of supercritical CO2 extrusion in the production of safe, nutritionally improved snack products. Future research might bring about the design of cost-effective processes applicable in the industry.

White Chocolate with Resistant Starch: Impact on Physical Properties, Dietary Fiber Content and Sensory Characteristics.

Resistant starch (RS) is a part of insoluble dietary fiber, and it could be recognized as a functional food ingredient in some types of confectionery products that lack dietary fiber. Unlike dark and milk chocolate, white chocolate does not contain fat-free cocoa solids rich in dietary fiber. In the present study, 5%, 10%, and 15% of white chocolate were substituted with RS in order to improve the nutritional value of enriched white chocolate. The influence of RS on rheological, textural, and thermal properties of the chocolate fat phase was firstly investigated, and then further influence on physical properties, dietary fiber content, and sensory characteristics of enriched white chocolates were investigated. The obtained results showed that enriched chocolates had increased content of total dietary fiber and reduced total fats and protein content in accordance with the added amount of RS. At the same time, RS increased viscosity and reduced the hardness and volume mean diameter in enriched chocolates in accordance with the added amount. RS improved the nutritional composition of white chocolate by increasing the content of dietary fiber. At the same time, RS did not impair the color and sensory characteristics of enriched white chocolates.

Carbohydrates-Key Players in Tobacco Aroma Formation and Quality Determination.

Carbohydrates are important compounds in natural products where they primarily serve as a source of energy, but they have important secondary roles as precursors of aroma or bioactive compounds. They are present in fresh and dried (cured) tobacco leaves as well. The sugar content of tobacco depends on the tobacco variety, harvesting, and primarily on the curing conditions (temperature, time and moisture). If the process of curing employs high temperatures (flue-curing and sun-curing), final sugar content is high. In contrast, when air curing has a lower temperature, at the end of the process, sugar level is low. Beside simple sugars, other carbohydrates reported in tobacco are oligosaccharides, cellulose, starch, and pectin. Degradation of polysaccharides results in a higher yield of simple sugars, but at the same time reduces sugars oxidization and transfer into carbon dioxide and water. Loss of sugar producers will compensate with added sugars, to cover undesirable aroma properties and achieve a better, pleasant taste during smoking. However, tobacco carbohydrates can be precursors for many harmful compounds, including formaldehyde and 5-hydroxymethylfurfural. Keeping in mind that added sugars in tobacco production are unavoidable, it is important to understand all changes in carbohydrates from harvesting to consuming in order to achieve better product properties and avoid the formation of harmful compounds. This review summarizes current knowledge about tobacco carbohydrates, including changes during processing with special focus on carbohydrates as precursors of harmful compounds during smoking.

Comparative Evaluation of Bioactive Compounds and Volatile Profile of White Cabbages.

Cabbage is an important source of bioactive compound, which is available throughout the year. However, a lot of different traditional, and hybrid varieties with different levels and composition of bioactive compounds can be found on the market. The aim of the study was to obtain quantitative results showing comparative differences between different white cabbages ("Cepinski", "Varazdinski", "Bravo", "Ogulinski") from Croatia. Morphometric parameters and physicochemical composition were determined while using standard procedures. Phenolic acids were determined using high-performance liquid chromatography and volatile compounds were analysed by the solid-phase micro-extraction gas chromatography with mass spectrometry (SPME-GC-MS) smethod. The results showed that studied cabbage cultivars differed in physicochemical composition and morphological traits. Six phenolic acids were identified and quantified, whereas a sinapic acid was the most dominant component (65.9-78.15 mg/kg). Aldehydes, esters, alcohols, and terpenes were the major classes of organic volatile compounds present in the studied cabbages. "Cepinski", which has never been analysed before, showed to contain the highest amount of d-limone (40.75 µg/L) and allyl isothiocyanate (1090.26 µg/L), the most important volatile compounds responsible for the fresh cabbage flavour. The presented results mark off "Cepinski" cultivar as valuable for larger production and further examination.

Cocoa Shell as a Step Forward to Functional Chocolates-Bioactive Components in Chocolates with Different Composition.

Chocolate is considered as both caloric and functional food. Its nutritional properties may be improved by addition of fiber; however, this may reduce polyphenols content. The aim of this research was to determine the influence of cocoa shell addition (as a source of fiber) and its combination with different ingredients (cocoa butter equivalents (CBE), emulsifiers, dairy ingredients) on polyphenols of dark and milk chocolates. Total polyphenol (TPC) and total flavonoid (TFC) contents were determined spectrophotometrically, identification and quantification of individual compounds by high pressure liquid chromatography and antioxidant capacity by ferric reducing antioxidant power (FRAP) assay. Results showed that even though addition of cocoa shell to chocolate results in reduced contents of TPC, TFC, and individual compounds, it is not significant compared to ones reported by other authors for commercial chocolates. Other ingredients influence determined values for all investigated parameters; however, additional research is needed to reveal exact mechanisms and implications.

Simultaneous Determination of Acrylamide and Hydroxymethylfurfural in Extruded Products by LC-MS/MS Method.

The aim of this study was to develop a liquid chromatography/tandem mass spectrometry LC-MS/MS method for the simultaneous determination of acrylamide and hydroxymethylfurfural (HMF) in corn snack products enriched with food industry by-products: brewer's spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP). Development of the method included the study of different sources for ionization, different mobile phases, different extraction conditions as well as different methods of sample preparation. Finally, the single LC-MS/MS method was developed for the analysis of both analytes in one step with a duration of 20 min using a simple single-step extraction. The method with apparent recoveries of 91.4 and 90.4 for acrylamide and HMF, respectively, was applied for the analysis of non-extruded and extruded samples. The obtained results shown that the acrylamide content was

The Chemistry behind Chocolate Production.

Chocolate production is a complex process during which numerous chemical reactions occur. The most important processes, involving most of the reactions important for development of the proper chocolate flavor, are fermentation, drying and roasting of cocoa bean, and chocolate conching. During fermentation, formation of important precursors occurs, which are essential for further chemical reactions in the following processes of chocolate production. Roasting is one of the most important processes due to the occurrence of Maillard's reactions, during which aroma compounds are formed. In this paper, we have reviewed the most important chemical reactions that occur with proteins, carbohydrates, lipids, and polyphenols. Additionally, we present other components that may be naturally present or form during the production process, such as methylxanthines, aldehydes, esters, ketones, pyrazines, acids, and alcohols.

Cocoa Shell: A By-Product with Great Potential for Wide Application.

Solving the problem of large quantities of organic waste, which represents an enormous ecological and financial burden for all aspects of the process industry, is a necessity. Therefore, there is an emerged need to find specific solutions to utilize raw materials as efficiently as possible in the production process. The cocoa shell is a valuable by-product obtained from the chocolate industry. It is rich in protein, dietary fiber, and ash, as well as in some other valuable bioactive compounds, such as methylxanthines and phenolics. This paper gives an overview of published results related to the cocoa shell, mostly on important bioactive compounds and possible applications of the cocoa shell in different areas. The cocoa shell, due to its nutritional value and high-value bioactive compounds, could become a desirable raw material in a large spectrum of functional, pharmaceutical, or cosmetic products, as well as in the production of energy or biofuels in the near future.

Starch Modification by Organic Acids and Their Derivatives: A Review.

Starch has been an inexhaustible subject of research for many decades. It is an inexpensive, readily-available material with extensive application in the food and processing industry. Researchers are continually trying to improve its properties by different modification procedures and expand its application. What is mostly applied in this view are their chemical modifications, among which organic acids have recently drawn the greatest attention, particularly with respect to the application of starch in the food industry. Namely, organic acids naturally occur in many edible plants and many of them are generally recognized as safe (GRAS), which make them ideal modification agents for starch intended for the food industry. The aim of this review is to give a short literature overview of the progress made in the research of starch esterification, etherification, cross-linking, and dual modification with organic acids and their derivatives.

Modification of wheat starch with succinic acid/acetic anhydride and azelaic acid/acetic anhydride mixtures I. Thermophysical and pasting properties.

The aim of this research was to investigate the influence of modification with succinic acid/acetic anhydride and azelaic acid/acetic anhydride mixtures on thermophysical and pasting properties of wheat starch. Starch was isolated from two wheat varieties and modified with mixtures of succinic acid and acetic anhydride, and azelaic acid and acetic anhydride in 4, 6 and 8 % (w/w). Thermophysical, pasting properties, swelling power, solubility and amylose content of modified starches were determined. The results showed that modifications with mixtures of afore mentioned dicarboxylic acids with acetic anhydride decreased gelatinisation and pasting temperatures. Gelatinisation enthalpy of Golubica starch increased, while of Srpanjka starch decreased by modifications. Retrogradation after 7 and 14 day-storage at 4 °C decreased after modifications of both starches. Maximum, hot and cold paste viscosity of both starches increased, while stability during shearing at high temperatures decreased. % setback of starches modified with azelaic acid/acetic anhydride mixture decreased. Swelling power and solubility of both starches increased by both modifications.

Modification of wheat starch with succinic acid/acetanhydride and azelaic acid/acetanhydride mixtures. II. Chemical and physical properties.

The aim of this research was to investigate the influence of modification with succinic acid/acetanhydride and azelaic acid/acetanhydride mixtures on chemical and physical properties of wheat starch. Starch was isolated from two wheat varieties and modified with mixtures of succinic acid and acetanhydride and azelaic acid and acetanhydride in 4, 6 and 8% (w/w). Total starch content, resistant starch content, degree of modification, changes in FT-IR spectra, colour, gel texture and freeze-thaw stability were determined. Results showed that resistant starch content increased by both investigated modifications, and degree of modification increased proportionally to amount of reagents used. FT-IR analysis of modified starches showed peak around 1,740 cm(-1), characteristic for carbonyl group of ester. Total colour difference caused by modifications was detectable by trained people. Adhesiveness significantly increased, while freeze-thaw stability decreased by both investigated modifications.

Biopolymeric Blends of Thermoplastic Starch and Polylactide as Sustainable Packaging Materials.

The improper disposal of plastics is a growing concern due to increasing global environmental problems such as the rise of CO2 emissions, diminishing petroleum sources, and pollution, which necessitates the research and development of biodegradable materials as an alternative to conventional packaging materials. The purpose of this research was to analyse the properties of biodegradable polymer blends of thermoplastic potato starch (TPS) and polylactide, (PLA) without and with the addition of citric acid (CA) as a potential compatibilizer and plasticizer. The prepared blends were subjected to a comprehensive physicochemical characterization, which included: FTIR-ATR spectroscopy, morphological analysis by scanning electron microscopy (SEM), determination of thermal and mechanical properties by differential scanning calorimetry (DSC), water vapour permeability (WVP), as well as biodegradation testing in soil. The obtained results indicate an improvement in adhesion between the TPS and PLA phases due to the addition of citric acid, better homogeneity of the structure, and greater compatibility of the polymer blends, leading to better thermal, mechanical and barrier properties of the studied biodegradable TPS/PLA polymer blends. After conducting the comprehensive research outlined in this paper, it has been determined that the addition of 5 wt.% of citric acid serves as an effective compatibilizer and plasticizer. This supplementation achieves an optimal equilibrium across thermal, mechanical, morphological, and barrier properties, while also promoting material sustainability through biodegradation. In conclusion, it can be stated that the use of thermoplastic starch in TPS/PLA blends accelerates the biodegradation of PLA as a slowly biodegradable polymer. While the addition of citric acid offers significant advantages for TPS/PLA blends, further research is needed to optimize the formulation and processing parameters to achieve the desired balance between mechanical strength, thermal and barrier properties and biodegradability.

The Influence of Starch Sweeteners on Functional Properties of Cellulose Fat Mimetics: Rheological and Textural Aspects.

Starch sweeteners are commonly used in many confectionery food products. Usually, considering the trend of producing low-energy and low-fat products, these products include fat mimetics. The aim of this study was to investigate the influence of fructose sweeteners on the development of functional properties of MCG fat mimetic, such as rheological and textural behavior. Fat mimetics made from Microcrystalline cellulose gel (MCG) consist of colloidal microcrystalline cellulose (MCC) and sodium carboxymethyl cellulose (NaCMC) and were observed in five different concentrations (1, 3, 5, 7, and 10%). The amount of starch sweetener in the mixture with the fat mimetics was 20%. The effect of pure crystalline fructose and a mixture of crystalline-fructose and high-fructose corn syrup in a ratio of 1:1 was analyzed. Rheological parameters significantly decreased with the application of starch sweeteners. By adding a mixture of starch sweeteners, this decrease was further increased by 10%. At higher gel concentrations of 5, 7, and 10%, the dominance of the elastic modulus G' was preserved. Texture parameters such as firmness, consistency, cohesiveness, and viscosity index were reduced accordingly. The presence of starch sweeteners significantly disrupted the networking of the three-dimensional structure of the MCG gel and the proper hydration process during the formation of fat mimetics.

Physical Properties of Starches Modified by Phosphorylation and High-Voltage Electrical Discharge (HVED).

High-voltage electrical discharge (HVED) is considered as a novel, non-thermal process and is currently being researched regarding its effect on microorganisms (decontamination of food), waste water treatment, and modification of different compounds and food components. In this paper, four native starches (maize, wheat, potato, and tapioca) were treated with HVED, phosphorylated with Na2HPO4 and Na5P3O10, and modified by a combination of HVED with each phosphorylation reaction both prior and after chemical modification. Pasting properties, swelling power, solubility, gel texture, and particle size were analyzed. Although HVED induced lower contents of P in modified starches, it had an effect on analyzed properties. The results revealed that HVED treatment alone had a limited effect on pasting properties of starches, but it had an effect on properties of phosphorylated starches, both when it was conducted prior and after the chemical modification, reducing the influence of Na5P3O10 and Na2HPO4 on the decrease of pasting temperature. With minor exceptions, the gel strength of starches increased, and the rupture strength decreased by all modifications. HVED treatment resulted in a decrease of the particle size after the modification of maize and wheat starches, while potato and tapioca starches were not significantly influenced by the treatment.

Food Industry By-Products as Raw Materials in the Production of Value-Added Corn Snack Products.

The addition of brewer's spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP), on the nutritional properties of directly expanded snack products based on corn grits was investigated. Snack products were produced in a laboratory single screw extruder with the addition of 5, 10 and 15% d. m. of these by-products in corn grits. Chemical composition, total phenolic content, antioxidant activity, dietary fiber, resistant starch, starch damage and pasting properties of the mixtures and extruded samples were determined. Extrusion process and by-product additions had a significant effect on the proximate chemical composition. All three by-products increased contents of both soluble and insoluble dietary fiber, while the extrusion caused a reduction of insoluble fiber and increase of soluble fiber. After the extrusion process starch damage and antioxidant activity increased, while resistant starch content and total polyphenol content decreased. According to obtained results, it can be concluded that the investigated by-products can be used in the production of nutritionally more valuable corn snacks.

Phosphorylation of Maize Starch Enhanced with High-Voltage Electrical Discharge (HVED) Instead of Thermal Treatment.

The aim of this research was to explore the use of a high-voltage electrical treatment (HVED) as a substitute for heating during the phosphorylation of maize starch. Starch was treated with HVED, phosphorylated with Na2HPO4 or Na5P3O10 with and without thermal treatment and phosphorylated in combination with HVED prior to and after the chemical modification. When starch was phosphorylated with Na2HPO4, HVED was more efficient in catalyzing reaction (3.89 mg P/kg for 30 min HVED in relation to 0.43 mg P/kg for thermal treatment), whereas with Na5P3O10 similar P content was achieved as with thermal treatment (0.76 P/kg for 30 min HVED in relation to 0.86 mg P/kg). The order of HVED and chemical reactions did not have a marked effect on phosphorous content. In combination with Na2HPO4, HVED pre-treatment had a more pronounced effect on the solubility and water absorption, whereas post-treatment was favoured with Na5P3O10. Mean diameter was increased by all treatments, where HVED had a marked effect. Enthalpy of gelatinization ranged from 11.76 J/g for starch treated with Na5P3O10 and 10 min-HVED to 13.58 J/g for Na5P3O10 treated sample. G' and G″ increased after both thermally and HVED enhanced phosphorylations, with a slightly more pronounced effect of the HVED.

Properties of Potato Starch Roasted with Apple Distillery Wastewater.

This study aimed to produce starch esters by roasting potato starch with apple distillery wastewater at various temperatures and aimed to determine the effects of esterification conditions on selected properties of the modified preparations. Apple distillery wastewater was concentrated, mixed with starch (30 g of dry matter per 100 g of starch), dried, and roasted at temperatures of 110, 130 or 150 °C for 3 h. The resulting preparations were rinsed 30 times with a 60% ethanol solution, dried, and disintegrated. After that, the following analyses were performed: content of substituted acids (after alkaline de-esterification) with high performance liquid chromatography (HPLC); thermal characteristics with differential scanning calorimetry (DSC); swelling power and solubility in water at 80 °C; color changes with a colorimeter; rheology of the pastes based on the plotted flow curves; and the pastes' resistance to amyloglucosidase. Starch treatments with apple distillery wastewater at 130 and 150 °C caused significant changes to its properties when compared to the control samples of native starch and starch roasted without wastewater, including: a lower temperature and heat of pasting, lower swelling power and solubility in water, darker color, higher resistance to amyloglucosidase, and the formation of pastes with a lower viscosity.

Does High Voltage Electrical Discharge Treatment Induce Changes in Tannin and Fiber Properties of Cocoa Shell?

Cocoa shell is a by-product of the chocolate industry that is rich in dietary fiber and bioactive components. In this research, the influence of high voltage electric discharge (HVED) treatment on chemical and physical characteristics of the cocoa shell, i.e., the effects of applied time and frequencies on grinding ability, water binding capacity (WBC), dietary fibers and tannin content was investigated. HVED had a significant influence on the chemical and physical properties of cocoa shell, all of which could be linked to changes in fiber properties. Along with the fiber content, grinding ability and water binding capacity were increased. These properties have already been linked to fiber content and soluble/insoluble fiber ratio. However, this research implies that change in fiber properties could be linked to tannin formation via complexation of other polyphenolic components. Additional research is needed to verify this effect and to establish mechanisms of tannin formation induced by HVED and its influence on fiber quantification.

Encapsulated sour cherry pomace extract: Effect on the colour and rheology of cookie dough.

In this study, the effect of encapsulated sour cherry pomace extract on the physical characteristics of the cookie dough (colour, textural and rheological properties) was investigated. Sour cherry pomace extract encapsulated in whey (WE) and soy proteins (SE) was incorporated in cookie dough, replacing 10% (WE10 and SE10) and 15% (WE15 and SE15) of wheat flour. The dough samples containing encapsulates had the grey-blue colour ( b* values significantly decreased compared to control sample). Due to the presence of anthocyanins, a* values of the dough colour increased significantly with the addition of encapsulates. The addition of soy protein encapsulate increased hardness, resistance to extension and viscosity of cookie dough and decreased deformation compliance ( J), while the addition of whey encapsulate caused dough softness, higher deformation compliance and lower values of viscosity compared to control sample. Values of storage and loss modulus, G' and G″, significantly decreased when wheat flour was replaced with WE and increased when the flour was replaced with soy protein encapsulate. The addition of soy protein encapsulate resulted in higher cookie hardness.

Influence of dried Hokkaido pumpkin and ascorbic acid addition on chemical properties and colour of corn extrudates.

The influence of Hokkaido pumpkin powder (PP) addition to corn grits at levels 4%, 6%, and 8% and ascorbic acid (AA) addition at levels 0.5% and 1% was evaluated. Extrusion was done using a single-screw extruder at two temperature regimes: 135/170/170°C (E1) and 100/150/150°C (E2). Mathematical models that describe the influence of additives on the colour of extrudates were determined. Raw extrusion mixtures as well as obtained extrudates were tested for ascorbic acid, polyphenol, proteins, fat, crude fibre, ash and carotenoids content, and antioxidant activity. E1 extrusion regime acted favourably on polyphenols, crude fibre content, and antioxidant activity. It also caused higher fat degradation than E2 extrusion. Xanthophylls (lutein and zeaxanthin) were less sensitive to extrusion than carotenes (α-carotene, 9-cis-ß-carotene and 13-cis-ß-carotene). Ascorbic acid was more sensitive to higher extrusion temperatures (49-76% degradation). It provided protection to carotenoids and consequently the colour of the extrudates.