Direct 12-Electron Oxidation of Ethanol on a Ternary Au(core)-PtIr(Shell) Electrocatalyst.

Understanding the roles of metals and atomic structures in activating various elementary steps of electrocatalytic reactions can help rational design of binary or ternary catalysts for promoting activity toward desirable products via favorable pathways. Here we report on a newly developed ternary Au@PtIr core-shell catalyst for ethanol oxidation reaction (EOR) in alkaline solutions, which exhibits an activity enhancement of 6 orders of magnitude compared to AuPtIr alloy catalysts. Analysis of in situ infrared reflection absorption spectra for Au@PtIr and its bimetallic subsets, Au@Pt and PtIr alloy, found that monatomic steps and Au-induced tensile strain on PtIr facilitate C-C bond splitting via ethanol dissociative adsorption and Ir promotes dehydrogenation at low potentials. As evidenced by the CO band being observed only for the PtIr alloy that is rather inactive for ethanol dissociative adsorption, we propose that splitting the C-C bond at the earliest stage of EOR activates a direct 12-electron full oxidation pathway because hydrogen-rich fragments can be fully oxidized without CO as a poisoning intermediate. The resulting synergy of complementary effects of Au core and surface Ir leads to an outstanding performance of Au@PtIr for EOR as characterized by a low onset potential of 0.3 V and 8.3 A mg-1all-metals peak current with 57% currents generated via full ethanol oxidation.

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation.

NH3 synthesis by the electrocatalytic N2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method-the Haber-Bosch process-that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen-doped porous carbon as a cost-effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH3 yield rate (34.0±3.6 µg NH 3 h-1 mgcat. -1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non-precious-metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single-atom non-precious-metal catalysts for the electrocatalytic NRR.

Core-Shell Structuring of Pure Metallic Aerogels towards Highly Efficient Platinum Utilization for the Oxygen Reduction Reaction.

The development of core-shell structures remains a fundamental challenge for pure metallic aerogels. Here we report the synthesis of Pdx Au-Pt core-shell aerogels composed of an ultrathin Pt shell and a composition-tunable Pdx Au alloy core. The universality of this strategy ensures the extension of core compositions to Pd transition-metal alloys. The core-shell aerogels exhibited largely improved Pt utilization efficiencies for the oxygen reduction reaction and their activities show a volcano-type relationship as a function of the lattice parameter of the core substrate. The maximum mass and specific activities are 5.25 A mgPt-1 and 2.53 mA cm-2 , which are 18.7 and 4.1 times higher than those of Pt/C, respectively, demonstrating the superiority of the core-shell metallic aerogels. The proposed core-based activity descriptor provides a new possible strategy for the design of future core-shell electrocatalysts.

Surface Proton Transfer Promotes Four-Electron Oxygen Reduction on Gold Nanocrystal Surfaces in Alkaline Solution.

Four-electron oxygen reduction reaction (4e-ORR), a key pathway in energy conversion, is preferred over the two-electron reduction pathway that falls short in dissociating dioxygen molecules. Gold surfaces exhibit high sensitivity of the ORR pathway to its atomic structures. A long-standing puzzle remains unsolved: why the Au surfaces with {100} sub-facets were exceptionally capable to catalyze the 4e-ORR in alkaline solution, though limited within a narrow potential window. Herein we report the discovery of a dominant 4e-ORR over the whole potential range on {310} surface of Au nanocrystal shaped as truncated ditetragonal prism (TDP). In contrast, ORR pathways on single-crystalline facets of shaped nanoparticles, including {111} on nano-octahedra and {100} on nanocubes, are similar to their single-crystal counterparts. Combining our experimental results with density functional theory calculations, we elucidate the key role of surface proton transfers from co-adsorbed H2O molecules in activating the facet- and potential-dependent 4e-ORR on Au in alkaline solutions. These results elucidate how surface atomic structures determine the reaction pathways via bond scission and formation among weakly adsorbed water and reaction intermediates. The new insight helps in developing facet-specific nanocatalysts for various reactions.

Increasing Stability and Activity of Core-Shell Catalysts by Preferential Segregation of Oxide on Edges and Vertexes: Oxygen Reduction on Ti-Au@Pt/C.

We describe a new class of core-shell nanoparticle catalysts having edges and vertexes covered by refractory metal oxide that preferentially segregates onto these catalyst sites. The monolayer shell is deposited on the oxide-free core atoms. The oxide on edges and vertexes induces high catalyst stability and activity. The catalyst and synthesis are exemplified by fabrication of Au nanoparticles doped by Ti atoms that segregate as oxide onto low-coordination sites of edges and vertexes. Pt monolayer shell deposited on Au sites has the mass and specific activities for the oxygen reduction reaction about 13 and 5 times higher than those of commercial Pt/C catalysts. The durability tests show no activity loss after 10 000 potential cycles from 0.6 to 1.0 V. The superior activity and durability of the Ti-Au@Pt catalyst originate from protective titanium oxide located at the most dissolution-prone edge and vertex sites and Au-supported active and stable Pt shell.

Transition Metal Nitride Coated with Atomic Layers of Pt as a Low-Cost, Highly Stable Electrocatalyst for the Oxygen Reduction Reaction.

The main challenges to the commercial viability of polymer electrolyte membrane fuel cells are (i) the high cost associated with using large amounts of Pt in fuel cell cathodes to compensate for the sluggish kinetics of the oxygen reduction reaction, (ii) catalyst degradation, and (iii) carbon-support corrosion. To address these obstacles, our group has focused on robust, carbon-free transition metal nitride materials with low Pt content that exhibit tunable physical and catalytic properties. Here, we report on the high performance of a novel catalyst with low Pt content, prepared by placing several layers of Pt atoms on nanoparticles of titanium nickel binary nitride. For the ORR, the catalyst exhibited a more than 400% and 200% increase in mass activity and specific activity, respectively, compared with the commercial Pt/C catalyst. It also showed excellent stability/durability, experiencing only a slight performance loss after 10,000 potential cycles, while TEM results showed its structure had remained intact. The catalyst's outstanding performance may have resulted from the ultrahigh dispersion of Pt (several atomic layers coated on the nitride nanoparticles), and the excellent stability/durability may have been due to the good stability of nitride and synergetic effects between ultrathin Pt layer and the robust TiNiN support.

In Situ Probing of the Active Site Geometry of Ultrathin Nanowires for the Oxygen Reduction Reaction.

To create truly effective electrocatalysts for the cathodic reaction governing proton exchange membrane fuel cells (PEMFC), namely the oxygen reduction reaction (ORR), necessitates an accurate and detailed structural understanding of these electrocatalysts, especially at the nanoscale, and to precisely correlate that structure with demonstrable performance enhancement. To address this key issue, we have combined and interwoven theoretical calculations with experimental, spectroscopic observations in order to acquire useful structural insights into the active site geometry with implications for designing optimized nanoscale electrocatalysts with rationally predicted properties. Specifically, we have probed ultrathin (∼2 nm) core-shell Pt∼Pd9Au nanowires, which have been previously shown to be excellent candidates for ORR in terms of both activity and long-term stability, from the complementary perspectives of both DFT calculations and X-ray absorption spectroscopy (XAS). The combination and correlation of data from both experimental and theoretical studies has revealed for the first time that the catalytically active structure of our ternary nanowires can actually be ascribed to a PtAu∼Pd configuration, comprising a PtAu binary shell and a pure inner Pd core. Moreover, we have plausibly attributed the resulting structure to a specific synthesis step, namely the Cu underpotential deposition (UPD) followed by galvanic replacement with Pt. Hence, the fundamental insights gained into the performance of our ultrathin nanowires from our demonstrated approach will likely guide future directed efforts aimed at broadly improving upon the durability and stability of nanoscale electrocatalysts in general.

Molybdenum nitrides as oxygen reduction reaction catalysts: structural and electrochemical studies.

Monometallic (δ-MoN, Mo5N6, and Mo2N) and bimetallic molybdenum nitrides (Co0.6Mo1.4N2) were investigated as electrocatalysts for the oxygen reduction reaction (ORR), which is a key half-reaction in hydrogen fuel cells. Monometallic hexagonal molybdenum nitrides are found to exhibit improved activities over rock salt type molybdenum nitride (γ-Mo2N), suggesting that improvements are due to either the higher molybdenum valence or a more favorable coordination environment in the hexagonal structures. Further enhancements in activity were found for hexagonal bimetallic cobalt molybdenum nitride (Co0.6Mo1.4N2), resulting in a modest onset potential of 0.713 V versus reversible hydrogen electrode (RHE). Co0.6Mo1.4N2 exhibits good stability in acidic environments, and in the potential range lower than 0.5 V versus RHE, the ORR appears to proceed via a four-electron mechanism based on the analysis of rotating disc electrode results. A redetermination of the structures of the binary molybdenum nitrides was carried out using neutron diffraction data, which is far more sensitive to nitrogen site positions than X-ray diffraction data. The revised monometallic hexagonal nitride structures all share many common features with the Co0.6Mo1.4N2 structure, which has alternating layers of cations in octahedral and trigonal prismatic coordination, and are thus not limited to only trigonal prismatic Mo environments (as was originally postulated for δ-MoN).

Ternary electrocatalysts for oxidizing ethanol to carbon dioxide: making ir capable of splitting C-C bond.

Splitting the C-C bond is the main obstacle to electrooxidation of ethanol (EOR) to CO(2). We recently demonstrated that the ternary PtRhSnO(2) electrocatalyst can accomplish that reaction at room temperature with Rh having a unique capability to split the C-C bond. In this article, we report the finding that Ir can be induced to split the C-C bond as a component of the ternary catalyst. We characterized and compared the properties of several carbon-supported nanoparticle (NP) electrocatalysts comprising a SnO(2) NP core decorated with multimetallic nanoislands (MM' = PtIr, PtRh, IrRh, PtIrRh) prepared using a seeded growth approach. An array of characterization techniques were employed to establish the composition and architecture of the synthesized MM'/SnO(2) NPs, while electrochemical and in situ infrared reflection absorption spectroscopy studies elucidated trends in activity and the nature of the reaction intermediates and products. Both EOR reactivity and selectivity toward CO(2) formation of several of these MM'/SnO(2)/C electrocatalysts are significantly higher compared to conventional Pt/C and Pt/SnO(2)/C catalysts. We demonstrate that the PtIr/SnO(2)/C catalyst with high Ir content shows outstanding catalytic properties with the most negative EOR onset potential and reasonably good selectivity toward ethanol complete oxidation to CO(2).

Mixed close-packed cobalt molybdenum nitrides as non-noble metal electrocatalysts for the hydrogen evolution reaction.

A two-step solid-state reaction for preparing cobalt molybdenum nitride with a nanoscale morphology has been used to produce a highly active and stable electrocatalyst for the hydrogen evolution reaction (HER) under acidic conditions that achieves an iR-corrected current density of 10 mA cm(-2) at -0.20 V vs RHE at low catalyst loadings of 0.24 mg/cm(2) in rotating disk experiments under a H2 atmosphere. Neutron powder diffraction and pair distribution function (PDF) studies have been used to overcome the insensitivity of X-ray diffraction data to different transition-metal nitride structural polytypes and show that this cobalt molybdenum nitride crystallizes in space group P63/mmc with lattice parameters of a = 2.85176(2) Å and c = 10.9862(3) Å and a formula of Co0.6Mo1.4N2. This space group results from the four-layered stacking sequence of a mixed close-packed structure with alternating layers of transition metals in octahedral and trigonal prismatic coordination and is a structure type for which HER activity has not previously been reported. Based on the accurate bond distances obtained from time-of-flight neutron diffraction data, it is determined that the octahedral sites contain a mixture of divalent Co and trivalent Mo, while the trigonal prismatic sites contain Mo in a higher oxidation state. X-ray photoelectron spectroscopy (XPS) studies confirm that at the sample surface nitrogen is present and N-H moieties are abundant.

Design of Pt-Pd binary superlattices exploiting shape effects and synergistic effects for oxygen reduction reactions.

Large-area icosahedral-AB(13)-type Pt-Pd binary superlattices (BNSLs) are fabricated through self-assembly of 6 nm Pd nanocrystals (NCs) and 13 nm Pt octahedra at a liquid-air interface. The Pt-Pd BNSLs enable a high activity toward electrocatalysis of oxygen reduction reaction (ORR) by successfully exploiting the shape effects of Pt NCs and synergistic effects of Pt-Pd into a single crystalline nanostructure. The Pt-Pd BNSLs are promising catalysts for the oxygen electrode of fuel cells.

Heterogeneous catalysts need not be so "heterogeneous": monodisperse Pt nanocrystals by combining shape-controlled synthesis and purification by colloidal recrystallization.

Well-defined surfaces of Pt have been extensively studied for various catalytic processes. However, industrial catalysts are mostly composed of fine particles (e.g., nanocrystals), due to the desire for a high surface to volume ratio. Therefore, it is very important to explore and understand the catalytic processes both at nanoscale and on extended surfaces. In this report, a general synthetic method is described to prepare Pt nanocrystals with various morphologies. The synthesized Pt nanocrystals are further purified by exploiting the "self-cleaning" effect which results from the "colloidal recrystallization" of Pt supercrystals. The resulting high-purity nanocrystals enable the direct comparison of the reactivity of the {111} and {100} facets for important catalytic reactions. With these high-purity Pt nanocrystals, we have made several observations: Pt octahedra show higher poisoning tolerance in the electrooxidation of formic acid than Pt cubes; the oxidation of CO on Pt nanocrystals is structure insensitive when the partial pressure ratio p(O2)/p(CO) is close to or less than 0.5, while it is structure sensitive in the O(2)-rich environment; Pt octahedra have a lower activation energy than Pt cubes when catalyzing the electron transfer reaction between hexacyanoferrate (III) and thiosulfate ions. Through electrocatalysis, gas-phase-catalysis of CO oxidation, and a liquid-phase-catalysis of electron transfer reaction, we demonstrate that high quality Pt nanocrystals which have {111} and {100} facets selectively expose are ideal model materials to study catalysis at nanoscale.

Nitride stabilized PtNi core-shell nanocatalyst for high oxygen reduction activity.

We describe a route to the development of novel PtNiN core-shell catalysts with low Pt content shell and inexpensive NiN core having high activity and stability for the oxygen reduction reaction (ORR). The PtNiN synthesis involves nitriding Ni nanoparticles and simultaneously encapsulating it by 2-4 monolayer-thick Pt shell. The experimental data and the density functional theory calculations indicate nitride has the bifunctional effect that facilitates formation of the core-shell structures and improves the performance of the Pt shell by inducing both geometric and electronic effects. Synthesis of inexpensive NiN cores opens up possibilities for designing of various transition metal nitride based core-shell nanoparticles for a wide range of applications in energy conversion processes.

Highly enhanced electrocatalytic oxygen reduction performance observed in bimetallic palladium-based nanowires prepared under ambient, surfactantless conditions.

We have employed an ambient, template-based technique that is simple, efficient, and surfactantless to generate a series of bimetallic Pd(1-x)Au(x) and Pd(1-x)Pt(x) nanowires with control over composition and size. Our as-prepared nanowires maintain significantly enhanced activity toward oxygen reduction as compared with commercial Pt nanoparticles and other 1D nanostructures, as a result of their homogeneous alloyed structure. Specifically, Pd(9)Au and Pd(4)Pt nanowires possess oxygen reduction reaction (ORR) activities of 0.49 and 0.79 mA/cm(2), respectively, which are larger than the analogous value for commercial Pt nanoparticles (0.21 mA/cm(2)). In addition, core-shell Pt~Pd(9)Au nanowires have been prepared by electrodepositing a Pt monolayer shell and the corresponding specific, platinum mass, and platinum group metal mass activities were found to be 0.95 mA/cm(2), 2.08 A/mg(Pt), and 0.16 A/mg(PGM), respectively. The increased activity and catalytic performance is accompanied by improved durability toward ORR.

Mixed-metal Pt monolayer electrocatalysts with improved CO tolerance.

Using a combination of periodic, self-consistent, density functional theory (DFT) calculations and CO-stripping voltammetry experiments, we have designed a new class of Pt-M bimetallic monolayer catalysts supported on a non-Pt metal, which exhibit improved stability against CO poisoning and might be suitable for proton-exchange membrane fuel cell anodes. These surfaces help in reducing the overpotential associated with anodic CO oxidation and minimize the amount of Pt used, thereby reducing materials cost. DFT calculations predict highly repulsive interactions between adsorbed CO molecules on these surfaces, leading to weaker binding and lower coverage of CO than on pure Pt, which in turn facilitates oxidative removal of CO from these catalytic surfaces.

Enhanced electrocatalytic performance of processed, ultrathin, supported Pd-Pt core-shell nanowire catalysts for the oxygen reduction reaction.

We report on the synthesis, characterization, and electrochemical performance of novel, ultrathin Pt monolayer shell-Pd nanowire core catalysts. Initially, ultrathin Pd nanowires with diameters of 2.0 ± 0.5 nm were generated, and a method has been developed to achieve highly uniform distributions of these catalysts onto the Vulcan XC-72 carbon support. As-prepared wires are activated by the use of two distinctive treatment protocols followed by selective CO adsorption in order to selectively remove undesirable organic residues. Subsequently, the desired nanowire core-Pt monolayer shell motif was reliably achieved by Cu underpotential deposition followed by galvanic displacement of the Cu adatoms. The surface area and mass activity of the acid and ozone-treated nanowires were assessed, and the ozone-treated nanowires were found to maintain outstanding area and mass specific activities of 0.77 mA/cm(2) and 1.83 A/mg(Pt), respectively, which were significantly enhanced as compared with conventional commercial Pt nanoparticles, core-shell nanoparticles, and acid-treated nanowires. The ozone-treated nanowires also maintained excellent electrochemical durability under accelerated half-cell testing, and it was found that the area-specific activity increased by ~1.5 fold after a simulated catalyst lifetime.

Truncated ditetragonal gold prisms as nanofacet activators of catalytic platinum.

We report a facile, seed-mediated method to synthesize nanoscale gold truncated ditetragonal nanoprisms (TDPs) enclosed by 12 high-index {310} facets. The method leads to the formation of nanoparticles with high size and shape monodispersity and allows for easy surfactant removal. The dependence of particle shape on the synergetic contribution of metallic ions, halide ions, and surfactant adsorbates during synthesis is described. The resulting high-index nanoparticle facets were demonstrated as efficient activators of a supported catalytic material (platinum). A Pt monolayer deposited onto the Au TDP nanofacets with sharp electrochemical signatures exhibits an enhanced catalytic activity.

Kirkendall effect and lattice contraction in nanocatalysts: a new strategy to enhance sustainable activity.

Core-shell nanoparticles increasingly are found to be effective in enhancing catalytic performance through the favorable influence of the core materials on the active components at the surface. Yet, sustaining high activities under operating conditions often has proven challenging. Here we explain how differences in the components' diffusivity affect the formation and stability of the core-shell and hollow nanostructures, which we ascribe to the Kirkendall effect. Using Ni nanoparticles as the templates, we fabricated compact and smooth Pt hollow nanocrystals that exhibit a sustained enhancement in Pt mass activity for oxygen reduction in acid fuel cells. This is achieved by the hollow-induced lattice contraction, high surface area per mass, and oxidation-resistant surface morphology--a new route for enhancing both the catalysts' activity and durability. The results indicate challenges and opportunities brought by the nanoscale Kirkendall effect for designing, at the atomic level, nanostructures with a wide range of novel properties.

Low-coordination sites in oxygen-reduction electrocatalysis: their roles and methods for removal.

Low-coordination sites, including edges, kinks, and defects, play an important role in oxygen-reduction electrocatalysis. Their role was studied experimentally and theoretically for various Pt surfaces. However, the roughness effect on similar-sized nanoparticles that could elucidate the role of low-coordination sites has attracted much less attention, with no studies on Pd nanoparticles. Here, using Br- adsorption/desorption, we introduce an effective approach to reduce surface roughness, yielding Pd nanoparticles with smoother surfaces and an increased number of (111)-oriented facets. The resulting nanoparticles have a slightly contracted structure and narrow size distribution. Pt monolayer catalysts that contain such nanoparticles as the cores showed a 1.5-fold enhancement in specific and Pt mass activities for the oxygen reduction reaction compared with untreated ones. Furthermore, a dramatic increase in durability was observed with bromide-treated Pd(3)Co cores. These results demonstrate a simple approach to preparing nanoparticles with smooth surfaces and confirm the adverse effect of low-coordination sites on the kinetics of the oxygen-reduction reaction.

Size-dependent enhancement of electrocatalytic performance in relatively defect-free, processed ultrathin platinum nanowires.

We report on the synthesis, characterization, and electrocatalytic performance of ultrathin Pt nanowires with a diameter of less than 2 nm. An acid-wash protocol was employed in order to yield highly exfoliated, crystalline nanowires with a diameter of 1.3 +/- 0.4 nm. The electrocatalytic activity of these nanowires toward the oxygen reduction reaction was studied in relation to the activity of both supported and unsupported Pt nanoparticles as well as with previously synthesized Pt nanotubes. Our ultrathin, acid-treated, unsupported nanowires displayed an electrochemical surface area activity of 1.45 mA/cm(2), which was nearly 4 times greater than that of analogous, unsupported platinum nanotubes and 7 times greater than that of commercial supported platinum nanoparticles.