RESUMO
INTRODUCTION: The human rib provides a vital role in the protection of thoracic contents. Rib fractures are linked to injuries and health complications that can be fatal. Current clinical methods to assess fracture risk and bone quality are insufficient to quantify intra-element differences in bone mineral density (BMD) or to identify at-risk populations. Utilizing quantitative computed tomography (QCT) provides accurate measures of volumetric BMD (vBMD) along the length of the rib which can help delineate factors influencing differential fracture risk. METHODOLOGY: One mid-level rib was obtained from 54 post-mortem human subjects (PMHS) and scanned using QCT. Volumes of interest (VOIs) were created for sites at 30%, 50%, and 75% of rib total curve length. Mean Hounsfield units (HU) from each VOI were converted to vBMD using a scan-specific cortical phantom calibration curve. Additionally, rib and lumbar areal BMD (aBMD) were obtained from a sub-sample of 33 PMHS. RESULTS: Significant differences in vBMD were found between all sites within the rib (p<0.01). When analyzed by sex, vBMD between the 30% and 50% site were no longer different in either males or females (p>0.05). Separating the sample into discrete age groups demonstrated the relative differences in vBMD between sites diminished with age. Further, age as a continuous variable significantly predicted rib vBMD at all sites (p<0.05), but with little practical or clinical utility (R2, 14.7- 22.8%). Similarly, only small amounts of variation in rib vBMD were explained from DXA lumbar and rib aBMD (R2 , 1.1-21.8%). CONCLUSIONS: vBMD significantly decreased from the posterior (30%) site to the anterior (75%) site within the rib which may represent adaptation to localized mechanical loading. These differences could result in differential fracture risk across the rib. As thoracic injury can be fatal, using comprehensive assessments of bone quality that accounts for variation within the rib may provide more accurate identification of at-risk populations.
Assuntos
Densidade Óssea , Fraturas Ósseas , Masculino , Feminino , Humanos , Absorciometria de Fóton/métodos , Cadáver , Costelas/diagnóstico por imagemRESUMO
The objective of this study was to develop an analytical model using strain-force relationships from individual rib and eviscerated thorax impacts to predict bony thoracic response. Experimental eviscerated thorax forces were assumed to have two distinct responses: an initial inertial response and subsequently, the main response. A second-order mass-spring-damper model was used to characterize the initial inertial response of eviscerated thorax force using impactor kinematics. For the main response, equivalent strains in rib levels 4-7 were mapped at each time point and a strain-based summed force model was constructed using individual rib tests and the same ribs in the eviscerated thorax test. A piecewise approach was developed to join the two components of the curve and solve for mass, damping, stiffness parameters in the initial response, transition point, and scale factor of the strain-based summed force model. The final piecewise model was compared to the overall experimental eviscerated thorax forces for each postmortem human subjects (PMHS) (n = 5) and resulted in R2 values of 0.87-0.96. A bootstrapping approach was utilized to validate the model. Final model predictions for the validation subjects were compared with the corridors constructed for the eviscerated thorax tests. Biofidelity ranking system score (BRSS) values were approximately 0.71 indicating that this approach can predict eviscerated responses within one standard deviation from the mean response. This model can be expanded to other tissue states by quantifying soft tissue and visceral contributions, therefore successfully establishing a link between individual rib tests and whole thoracic response.
Assuntos
Fraturas das Costelas , Acidentes de Trânsito , Fenômenos Biomecânicos , Cadáver , Humanos , Costelas , Tórax/fisiologiaRESUMO
Skeletal fractures, a common injury in physically abused children, often go undetected and untreated for significant lengths of time and are sometimes incidentally discovered radiographically. Our objective was to review current literature for scientific studies of pediatric fracture healing with associated timelines. We conducted a search of Embase, EBSCOhost, MEDLINE (PubMed), and Web of Science for literature published from the earliest available up to August 2018. We evaluated the included articles for quality, with consideration for use in clinical and forensic settings. Of a total of 313 full-text articles evaluated, 10 met study inclusion criteria. The patient age range among studies was 0-17 years, with children younger than 1 year included in the majority of studies. The fracture locations included in studies were primarily fractures of the upper limb and pectoral girdle, followed by fractures of the lower limb. The radiographic features of healing varied greatly among the studies. Timelines of common fracture healing variables differed significantly among studies. Scientific, radiographic studies of pediatric fracture healing are limited. Gaps in knowledge regarding fracture healing highlight the need for future research and validation studies. Fracture healing timelines derived from existing timelines should be used with caution.
Assuntos
Consolidação da Fratura , Fraturas Ósseas/diagnóstico por imagem , Criança , Maus-Tratos Infantis , Medicina Legal , Fraturas Ósseas/etiologia , Humanos , Achados Incidentais , Fatores de TempoRESUMO
Here we present detailed regional bone thickness and cross-sectional measurements from full adult ribs using high resolution CT scans processed with a cortical bone mapping technique. Sixth ribs from 33 subjects ranging from 24 to 99 years of age were used to produce average cortical bone thickness maps and to provide average ± 1SD corridors for expected cross-section properties (cross-sectional areas and inertial moments) as a function of rib length. Results obtained from CT data were validated at specific rib locations using direct measurements from cut sections. Individual thickness measurements from CT had an accuracy (mean error) and precision (SD error) of -0.013 ± 0.167 mm (R2 coefficient of determination of 0.84). CT-based measurement errors for rib cross-sectional geometry were -0.1 ± 13.1% (cortical bone cross-sectional area) and 4.7 ± 1.8% (total cross-sectional area). Rib cortical bone thickness maps show the expected regional variation across a typical rib's surface. The local mid-rib maxima in cortical thickness along the pleural rib aspect ranged from range 0.9 to 2.6 mm across the study population with an average map maximum of 1.4 mm. Along the cutaneous aspect, rib cortical bone thickness ranged from 0.7 to 1.9 mm with an average map thickness of 0.9 mm. Average cross-sectional properties show a steady reduction in total cortical bone area from 10% along the rib's length through to the sternal end, whereas overall cross-sectional area remains relatively constant along the majority of the rib's length before rising steeply towards the sternal end. On average, male ribs contained more cortical bone within a given cross-section than was seen for female ribs. Importantly, however, this difference was driven by male ribs having larger overall cross-sectional areas, rather than by sex differences in the bone thickness observed at specific local cortex sites. The cortical bone thickness results here can be used directly to improve the accuracy of current human body and rib models. Furthermore, the measurement corridors obtained from adult subjects across a wide age range can be used to validate future measurements from more widely available image sources such as clinical CT where gold standard reference measures (e.g. such as direct measurements obtained from cut sections) are otherwise unobtainable.
Assuntos
Osso Cortical/anatomia & histologia , Costelas/anatomia & histologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Osso Cortical/diagnóstico por imagem , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Modelos Anatômicos , Tamanho do Órgão/fisiologia , Costelas/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Adulto JovemRESUMO
A major part of histologic studies is the use of high resolution imaging for data collection and analysis. ImageJ, a freely available software from the NIH designed for image analysis, has many features that are not well-known among bone histologists and can be incredibly beneficial in terms of stream-lining data collection and maximizing limited resources. The aims of this technical note are twofold: (a) to describe methods for image annotation and measurement using region of interest overlays in ImageJ, and (b) to present a new code for a semi-automated method of measuring cortical bone areas from high resolution cross-sectional images also using ImageJ.
Assuntos
Osso Cortical/diagnóstico por imagem , Técnicas Histológicas/métodos , Processamento de Imagem Assistida por Computador/métodos , Antropologia Física , Bases de Dados Factuais , Modelos Biológicos , SoftwareRESUMO
Intracortical remodeling, and the osteons it produces, is one aspect of the bone microstructure that is influenced by and, in turn, can influence its mechanical properties. Previous research examining the spatial distribution of intracortical remodeling density across the femoral midshaft has been limited to either considering only small regions of the cortex or, when looking at the entirety of the cortex, considering only a single individual. This study examined the spatial distribution of all remodeling events (intact osteons, fragmentary osteons, and resorptive bays) across the entirety of the femoral midshaft in a sample of 30 modern cadaveric donors. The sample consisted of 15 males and 15 females, aged 21-97 years at time of death. Using geographic information systems software, the femoral cortex was subdivided radially into thirds and circumferentially into octants, and the spatial location of all remodeling events was marked. Density maps and calculation of osteon population density in cortical regions of interest revealed that remodeling density is typically highest in the periosteal third of the bone, particularly in the lateral and anterolateral regions of the cortex. Due to modeling drift, this area of the midshaft femur has some of the youngest primary tissue, which consequently reveals that the lateral and anterolateral regions of the femoral midshaft have higher remodeling rates than elsewhere in the cortex. This is likely the result of tension/shear forces and/or greater strain magnitudes acting upon the anterolateral femur, which results in a greater amount of microdamage in need of repair than is seen in the medial and posterior regions of the femoral midshaft, which are more subject to compressive forces and/or lesser strain magnitudes.
Assuntos
Adaptação Fisiológica/fisiologia , Remodelação Óssea/fisiologia , Ósteon/anatomia & histologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Fêmur/anatomia & histologia , Humanos , Processamento de Imagem Assistida por Computador , Masculino , Pessoa de Meia-Idade , Estresse Mecânico , Adulto JovemRESUMO
Adult stature variation is commonly attributed to differential stress-levels during development. However, due to selective mortality and heterogeneous frailty, a population's tall stature may be more indicative of high selective pressures than of positive life conditions. This article examines stature in a biocultural context and draws parallels between bioarchaeological and living populations to explore the multidimensionality of stature variation in the past. This study investigates: 1) stature differences between archaeological populations exposed to low or high stress (inferred from skeletal indicators); 2) similarities in growth retardation patterns between archaeological and living groups; and 3) the apportionment of variance in growth outcomes at the regional level in archaeological and living populations. Anatomical stature estimates were examined in relation to skeletal stress indicators (cribra orbitalia, porotic hyperostosis, linear enamel hypoplasia) in two medieval bioarchaeological populations. Stature and biocultural information were gathered for comparative living samples from South America. Results indicate 1) significant (P < 0.01) differences in stature between groups exposed to different levels of skeletal stress; 2) greater prevalence of stunting among living groups, with similar patterns in socially stratified archaeological and modern groups; and 3) a degree of regional variance in growth outcomes consistent with that observed for highly selected traits. The relationship between early stress and growth is confounded by several factors-including catch-up growth, cultural buffering, and social inequality. The interpretations of early life conditions based on the relationship between stress and stature should be advanced with caution.
Assuntos
Antropologia Física , Arqueologia , Estatura/fisiologia , Adolescente , Adulto , Idoso , Feminino , História Medieval , Humanos , Indígenas Sul-Americanos/estatística & dados numéricos , Itália , Masculino , Pessoa de Meia-Idade , Polônia , Valores de Referência , Classe Social , América do Sul , Estresse Fisiológico , População Branca/estatística & dados numéricos , Adulto JovemRESUMO
OBJECTIVES: This study characterizes sexual dimorphism in skeletal markers of upper limb mechanical loading due to lateralization as evidence of division of labor in medieval Giecz, Poland. METHODS: Twenty-six dimensions for paired humeri, clavicles, and radii representing adult males (n = 89) and females (n = 53) were collected from a skeletal sample from the cemetery site Gz4. Percent directional asymmetry (DA) and absolute asymmetry (AA) for each dimension were compared among bones, osteometric subcategories, and sex. Additionally, side bias and sex differences were assessed in degenerative joint disease (DJD) and entheseal changes (ECs). RESULTS: Nearly all measurements revealed significant asymmetry favoring the right side. Asymmetry was most pronounced in midshaft dimensions with few sex differences. There were more correlations among dimensions within elements than between elements, mainly in the midshaft. No laterality in DJD frequencies was noted for either sex, but females demonstrated significantly lower odds of having DJD than males in most joints. Most ECs demonstrated a right-bias and association with DA with no sex-specific patterns except the biceps brachii insertion, where females were ~5 times more likely to be scored "right" than males. DISCUSSION: The general lack of sex differences in asymmetry and ECs suggests similarly demanding workloads for females and males, with the exception of sex-specific functional loading differences in the forearm. Further, DJD data suggest males engaged in more intensive activities involving the upper limb. These results enhance understanding of workload in this important historical period and provide a comparison for asymmetry in past populations.
Assuntos
Caracteres Sexuais , Carga de Trabalho , Humanos , Masculino , Feminino , Polônia , Extremidade Superior , ÚmeroRESUMO
OBJECTIVE: This study aims to establish best practices and guidelines to ensure that experimental research utilizing Postmortem Human Subjects (PMHS) for injury prevention adheres to relevant ethical principles, which are also commonly accepted in research involving human tissues and living subjects. Furthermore, it reviews existing literature to underscore the pivotal role of PMHS testing in evaluating the efficacy of safety systems, with a particular focus on airbag performance. METHODS: This paper conducts an examination of the primary ethical principles governing human subject research as outlined in the Declaration of Helsinki (1965) and traces their evolution up to the latest framework proposed by the Council for International Organizations of Medical Sciences (CIOMS) in 2002. Input was solicited from international experts and laboratories experienced in PMHS testing to understand how these ethical principles are implemented in practice. This is complemented by a comprehensive review of literature that assesses the contribution of PMHS testing to airbag performance enhancements in frontal impacts. RESULTS: The findings underscore the importance of informed consent from donors or their next-of-kin, as highlighted in CIOMS declarations, to ensure the ethical integrity of the donation process in line with international standards. The study also finds it customary for an independent review board to evaluate the research methodology and the necessity of employing PMHS tissue over alternative methods, such as computational models or crash test dummies. Despite various national regulations on human subject participation and living tissue research, no specific legal framework governing PMHS tissue use was identified. The systematic literature review revealed that PMHS testing has been crucial in identifying potential injury mechanisms not detected by Anthropomorphic Test Devices (ATD), significantly contributing to the enhancement of computer human body models and the biofidelity of crash test dummies. CONCLUSION: The International Council on the Biomechanics of Injury (IRCOBI) recognizes the need to provide guidance for research involving human cadaveric tissue to be conducted with the highest ethical standards. This study proposes five recommendations to ensure adherence to these ethical principles in PMHS testing, highlighting the paramount importance of obtaining informed consent and securing independent committee approval. Moreover, IRCOBI emphasizes that until a thorough understanding of tissue damage tolerance levels is achieved and human surrogates, such as ATDs or Human Body Models (HBM), reach full biofidelity, the use of human cadavers remains indispensable for developing effective injury prevention strategies and measures.
RESUMO
The material and morphometric properties of trabecular bone have been studied extensively in bones bearing significant weight, such as the appendicular long bones and spine. Less attention has been devoted to the ribs, where quantification of material properties is vital to understanding thoracic injury. The objective of this study was to quantify the compressive material properties of human rib trabecular bone and assess the effects of loading rate, age, and morphology on the material properties. Material properties were quantified via uniaxial compression tests performed on trabecular bone samples at two loading rates: 0.005 s-1 and 0.5 s-1. Morphometric parameters of each sample were quantified before testing using micro-computed tomography. Rib trabecular bone material properties were lower on average compared to trabecular bone from other anatomical locations. Morphometric parameters indicated an anisotropic structure with low connectivity and a sparser density of trabeculae in the rib compared to other locations. No significant differences in material properties were observed between the tested loading rates. Material properties were only significantly correlated with age at the 0.005 s-1 loading rate, and no morphometric parameter was significantly correlated with age. Trabecular separation and thickness were most strongly correlated with the material properties, indicating the sparser trabecular matrix likely contributed to the lower material property values compared to other sites. The novel trabecular bone material properties reported in this study can be used to improve the thoracic response and injury prediction of computational models.
Assuntos
Osso Esponjoso , Coluna Vertebral , Humanos , Microtomografia por Raio-X , Osso Esponjoso/diagnóstico por imagem , Costelas/diagnóstico por imagem , Pressão , Densidade ÓsseaRESUMO
OBJECTIVE: The purpose of this study was to generate biomechanical response corridors of the small female thorax during a frontal hub impact and evaluate scaled corridors that have been used to assess biofidelity of small female anthropomorphic test devices (ATDs) and human body models (HBMs). METHODS: Three small female postmortem human subjects (PMHS) were tested under identical conditions, in which the thorax was impacted using a 14.0 kg pneumatic impactor at an impact velocity of 4.3 m/s. Impact forces to PMHS thoraces were measured using a load cell installed behind a circular impactor face with a 15.2 cm diameter. Thoracic deflections were quantified using a chestband positioned at mid-sternum. Strain gages installed on the ribs and sternum identified fracture timing. Biomechanical response corridors (force-deflection) were generated and compared to scaled small female thoracic corridors using a traditional scaling method (TSM) and rib response-based scaling method (RRSM). A BioRank System Score (BRSS) was used to quantify differences between the small female PMHS data and both scaled corridors. RESULTS: Coefficients of variation from the three small female PMHS responses were less than 2% for peak force and 7% for peak deflection. Overall, the scaled corridor means determined from the TSM and RRSM were less than two standard deviations away from the mean small female PMHS corridors (BRSS < 2.0). The RRSM resulted in smaller deviation (BRSS = 1.1) from the PMHS corridors than the TSM (BRSS = 1.7), suggesting the RRSM is an appropriate scaling method. CONCLUSIONS: New small female PMHS force-deflection data are provided in this study. Scaled corridors from the TSM, which have been used to optimize current safety tools, were comparable to the small female PMHS corridors. The RRSM, which has the great benefit of using rib structural properties instead of requiring whole PMHS data, resulted in better agreement with the small female PMHS data than the TSM and deserves further investigation to identify scaling factors for other population demographics.
Assuntos
Acidentes de Trânsito , Fraturas das Costelas , Humanos , Feminino , Cadáver , Fenômenos Biomecânicos/fisiologia , Tórax/fisiologiaRESUMO
OBJECTIVE: In 2020, 17% of all crash fatalities were individuals aged 65 years or older. Crash data also revealed that for older occupants, thoracic related injuries are among the leading causes of fatality. Historically, the majority of near-side impact postmortem human subjects (PMHS) studies used a generic load wall to capture external loads that were applied to PMHS. While these data were helpful in documenting biofidelity, they did not represent a realistic response an occupant would undergo in a near-side crash. The objective of this research was to test small, elderly female PMHS in a repeatable, realistic near-side impact crash scenario to investigate current injury criteria as they relate to this vulnerable population. METHOD: Ten small, elderly PMHS were subjected to a realistic near-side impact loading condition. The PMHS were targeted to be elderly females age 60+, approximately 5th percentile in height and weight, with osteopenic areal bone mineral density. Each subject was seated on a mass-production seat, equipped with a side airbag and standard three-point restraint with a pretensioner. Other boundary conditions included an intruding driver's side door. PMHS instrumentation included strain gages on ribs 3-10 bilaterally to identify fracture timing. Two chestbands were used to measure chest deflection, one at the level of the axilla and one at the level of the xiphoid process. RESULTS: Injuries observed included rib fractures, particularly on the struck side, and in multiple cases a flail chest was observed. Eight of ten subjects resulted in AIS3+ thoracic injuries, despite previously tested ATDs predicting less than a 10% chance of AIS3+ injury. Subjects crossed the threshold for AIS3 injury in the range of only 1% - 9% chest compression. Additionally, mechanisms of injury varied, as some injuries were incurred by door interactions while others came during airbag interactions. CONCLUSIONS: This research points to two areas of concern that likely require further analysis: (1) the appropriateness of potentially oversimplified PMHS testing to establish injury thresholds and define injury criteria for complicated crash scenarios; (2) the importance of identifying the precise timing of injuries to better understand the effect of current passive restraint systems.
Assuntos
Air Bags , Fraturas das Costelas , Traumatismos Torácicos , Idoso , Feminino , Humanos , Acidentes de Trânsito , Air Bags/efeitos adversos , Fenômenos Biomecânicos , Cadáver , Fraturas das Costelas/epidemiologia , Fraturas das Costelas/etiologia , Traumatismos Torácicos/epidemiologia , Traumatismos Torácicos/etiologia , Pessoa de Meia-IdadeRESUMO
Objective: One potential nonstandard seating configuration for vehicles with automated driving systems (ADS) is a reclined seat that is rear-facing when in a frontal collision. There are limited biomechanical response and injury data for this seating configuration during high-speed collisions. The main objective of this study was to investigate thoracic biomechanical responses and injuries to male postmortem human subjects (PMHS) in a rear-facing scenario with varying boundary conditions.Method: Fourteen rear-facing male PMHS tests (10 previously published and 4 newly tested) were conducted at two different recline angles (25-degree and 45-degree) in 56 km/h frontal impacts. PMHS were seated in two different seats; one used a Fixed D-Ring (FDR) seat belt assembly and one used an All Belts To Seat (ABTS) restraint. For thoracic instrumentation, strain gages were attached to ribs to quantify strain and fracture timing. A chestband was installed at the mid-sternum level to quantify anterior-posterior (AP) chest deflections. Data from the thorax instrumentation were analyzed to investigate injury mechanisms.Results: The PMHS sustained a greater number of rib fractures (NRF) in the 45-degree recline condition (12 ± 7 NRF for ABTS45 and 25 ± 18 NRF for FDR45) than the 25-degree condition (6 ± 4 NRF for ABTS25 and 12 ± 8 NRF for FDR25), despite AP chest compressions in the 45-degree condition (-23.7 ± 9.4 mm for ABTS45 and -39.6 ± 11.9 mm for FDR45) being smaller than the 25-degree condition (-38.9 ± 16.9 mm for ABTS25 and -55.0 ± 4.4 mm for FDR25). The rib fractures from the ABTS condition were not as symmetric as the FDR condition in the 25-degree recline angle due to a belt retractor structure located at one side of the seatback frame. Average peak AP chest compression occurred at 45.7 ± 3.4 ms for ABTS45, 45.6 ± 3.1 ms for FDR45, 46.7 ± 1.9 ms for ABTS25, and 46.9 ± 2.3 ms for FDR25. Average peak seatback resultant force occurred at 43.9 ± 0.9 ms for ABTS45, 44.6 ± 0.8 ms for FDR45, 42.5 ± 0.2 ms for ABTS25, and 41.5 ± 0.5 ms for FDR25. The majority of rib fractures occurred after peak AP chest compression and peak seatback resultant force likely due to the ramping motion of the PMHS, which might create a combined loading (e.g., AP deflection and upward deflection) to the thorax. Although NRF in the 45-degree reclined condition was greater than the 25-degree recline condition, similar magnitudes of rib strains were observed regardless of seat and restraint types, while strain modes varied.Conclusions: The majority of rib fractures occurred after peak AP chest compression and peak seatback force, especially in FDR25, ABTS45, and FDR45, while the PMHS ramped up along the seatback. AP chest compression, seatback load, and strain measured along the rib could not explain the greater NRF in the 45-degree recline conditions. A complex combination of AP chest deflection with upward deflection was discovered as a possible mechanism for rib fractures in PMHS subjected to rear-facing frontal impacts in this study.
Assuntos
Fraturas das Costelas , Traumatismos Torácicos , Humanos , Masculino , Fraturas das Costelas/etiologia , Acidentes de Trânsito , Traumatismos Torácicos/etiologia , Cadáver , Fenômenos BiomecânicosRESUMO
Osteoporosis is a major health concern in modern society and is continually being evaluated in past populations by quantifying bone loss. Cortical area measures are commonly used in anthropological analyses to assess bone loss in the ribs, but these values are typically based on endosteal expansion and do not account for intracortical bone loss. The objective of this study is to evaluate the effectiveness of using absolute cortical area, compared to traditional cortical area measures to describe global bone loss in elderly ribs. Transverse sections were prepared from sixth ribs of ten elderly subjects, and bone area measurements were made from 100× magnification composites of each rib for calculation of cortical area (Ct.Ar) and percent cortical area (% C/T). In addition, all areas of intracortical porosity were measured and percent porosity area (% Po.Ar) calculated. Absolute cortical area (Ct.Ar(A)) was calculated by subtracting porosity area from cortical area, and a percent absolute cortical area (% C(A)/T) calculated. ANOVA results reveal significant interindividual variation in percent porosity area (% Po.Ar). Percent cortical area and percent absolute cortical area values were compared and results show a mean difference of 4.08% exists across all subjects, with a range of 1.19-11.73%. This suggests that intracortical porosity is variable and does play a role in age-associated bone loss in the rib. All future investigations of osteoporosis should account for intracortical porosity in bone loss.
Assuntos
Osteoporose/patologia , Costelas/patologia , Idoso , Idoso de 80 Anos ou mais , Análise de Variância , Densidade Óssea , Feminino , Humanos , Masculino , Microscopia , PorosidadeRESUMO
The intricate link between load environment and skeletal health is exemplified by the severe osteopenia that accompanies prolonged periods of immobilization, frequently referred to as disuse osteoporosis. Investigating the effects disuse has on the structural properties of bone provides a unique opportunity to better understand how mechanical loads influence the adaptation and maintenance of skeletal tissue. Here, we report results from an examination of multiple indicators of bone metabolism (e.g., mean osteon density, mean osteon size, bone mass, and bone area distribution) within the major long bones of individuals with distinct activity level differences. Results are based on a sample comprising two subjects that suffered from long-term quadriplegia and 28 individuals of comparable age that had full limb mobility. Although limited in sample size, our findings suggest bones associated with long-term disuse have lower osteon densities and larger osteon areas compared to individuals of normal mobility, reflecting dramatically lower remodeling rates potentially related to reduced strain levels. Moreover, immobilized skeletal elements demonstrate a reduced percentage of cortical area present resulting from endosteal resorption. Differences between mobility groups in the percentage of cortical area present and bone distribution of all skeletal elements, suggests bone modeling activity is negligible in the unloaded adult skeleton. Additional histomorphometric comparisons reveal potential intraskeletal differences in bone turnover rates suggesting remodeling rates are highest within the humeri and femora. Addition of more immobilized individuals in the future will allow for quantitative statistical analyses and greater consideration of human variation within and between individuals.
Assuntos
Densidade Óssea/fisiologia , Osso e Ossos/fisiologia , Quadriplegia/fisiopatologia , Idoso , Fenômenos Biomecânicos , Remodelação Óssea , Osso e Ossos/anatomia & histologia , Estudos de Casos e Controles , Interpretação Estatística de Dados , Feminino , Histocitoquímica , Humanos , Hipocinesia , Imobilização , Masculino , Pessoa de Meia-Idade , Osteoporose/fisiopatologiaRESUMO
Geographic information systems (GIS) software is typically used for analyzing geographically distributed data, allowing users to annotate points or areas on a map and attach data for spatial analyses. While traditional GIS-based research involves geo-referenced data (points tied to geographic locations), the use of this technology has other constructive applications for physical anthropologists. The use of GIS software for the study of bone histology offers a novel opportunity to analyze the distribution of bone nano- and microstructures, relative to macrostructure and in comparison to other variables of interest, such as biomechanical loading history. This approach allows for the examination of characteristics of single histological features while considering their role at the macroscopic level. Such research has immediate promise in examining the load history of bone by surveying the functional relationship between collagen fiber orientation (CFO) and strain mode. The diversity of GIS applications that may be utilized in bone histology research is just beginning to be explored. The goal of this study is to introduce a reliable methodology for such investigation and our objective is to quantify the heterogeneity of bone microstructure over an entire cross-section of bone using ArcGIS v 9.3 (ESRI). This was accomplished by identifying the distribution of remodeling units in a human metatarsal relative to bending axes. One biomechanical hypothesis suggests that CFO, manifested by patterns of birefringence, is indicative of mode of strain during formation. This study demonstrates that GIS can be used to investigate, describe, and compare such patterns through histological mapping.
Assuntos
Osso e Ossos/ultraestrutura , Técnicas Histológicas/métodos , Processamento de Imagem Assistida por Computador/métodos , Software , Antropologia Física/métodos , Feminino , Sistemas de Informação Geográfica , HumanosRESUMO
Rib fractures are common traumatic injuries, with links to increased morbidity and mortality. Finite element ribs from human body models have struggled to predict the force-displacement response, force and displacement at fracture, and the fracture location for isolated rib tests. In the current study, the sensitivity of a human body model rib with updated anisotropic and asymmetric material models to changes in boundary conditions, material properties, and geometry was investigated systematically to quantify contributions to response. The updated material models using uncalibrated average material properties from literature improved the force-displacement response of the model, whereas the cross-sectional geometry was the only parameter to effect fracture location. The resulting uncalibrated model with improved material models and cross-sectional geometry closely predicted experimental average force-displacement response and fracture location.
Assuntos
Modelos Biológicos , Fraturas das Costelas , Humanos , Fenômenos Biomecânicos , Acidentes de Trânsito , Costelas/fisiologia , Análise de Elementos FinitosRESUMO
The objectives of this study were to develop novel methods for quantifying human rib cortical bone material properties in compression and to compare the compressive material property data to existing tensile data for matched subjects. Cylindrical coupons were obtained from the rib cortical bone of 30 subjects (M = 19, F = 11) ranging from 18 to 95 years of age (Avg. = 48.5 ± 24.3). Two coupons were obtained from each subject. One coupon was tested in compression at 0.005 strain/s, while the other coupon was tested in compression at 0.5 strain/s. Load and displacement data were recorded so that the elastic modulus, yield stress, yield strain, ultimate stress, ultimate strain, elastic strain energy density (SED), plastic SED, and total SED could be calculated. All compressive material properties were significantly different between the two loading rates. An ANOVA revealed that sex alone had no significant effect on the compressive material properties. The interaction between sex and age was significant for some material properties, but this may have been a consequence of the lack of older females in the subject pool. None of the compressive material properties were significantly correlated with age, but were more correlated with sample density. This finding differed for the tensile material properties, which showed stronger correlations with age. When comparing between tension and compression, significant differences were observed for all material properties except for the total SED, once the effects of loading rate and age had been accounted for. This was the first study to quantify the material properties of human rib cortical bone in compression. The results of this study demonstrated that rib and thorax finite element models should consider the effects of loading rate, loading mode, and age when incorporating material properties published in the literature.
Assuntos
Osso Cortical , Costelas , Força Compressiva , Módulo de Elasticidade , Feminino , Humanos , Estresse Mecânico , TóraxRESUMO
Rib fractures are common thoracic injuries in motor vehicle crashes. Several human finite element (FE) human models have been created to numerically assess thoracic injury risks. However, the accurate prediction of rib biomechanical response has shown to be challenging due to human variation and modeling approaches. The main objective of this study was to better understand the role of modeling approaches on the biomechanical response of human ribs in anterior-posterior bending. Since the development of subject specific rib models is a time-consuming process, the second objective of this study was to develop an accurate morphing approach to quickly generate high quality subject specific rib meshes. The exterior geometries and cortical-trabecular boundaries of five human 6th-level ribs were extracted from CT-images. One rib mesh was developed in a parametric fashion and the other four ribs were developed with an in-house morphing algorithm. The morphing algorithm automatically defined landmarks on both the periosteal and endosteal boundaries of the cortical layer, which were used to morph the template nodes to target geometries. Three different cortical bone material models were defined based on the stress-strain data obtained from subject-specific tensile coupon tests for each rib. Full rib anterior-posterior bending tests were simulated based on data recorded in testing. The results showed similar trends to test data with some sensitivity relative to the material modeling approach. Additionally, the FE models were substantially more resistant to failure, highlighting the need for better techniques to model rib fracture. Overall, the results of this work can be used to improve the biofidelity of human rib finite element models.
Assuntos
Fraturas das Costelas , Costelas , Acidentes de Trânsito , Fenômenos Biomecânicos , Osso Cortical , Análise de Elementos Finitos , Humanos , Modelos BiológicosRESUMO
Thorax injuries mainly due to rib fractures have been associated with high rates of morbidity and mortality in motor vehicle crashes. Thoracic biomechanics has been studied extensively, but there are no robust biomechanical response targets for ribs that consider age, sex, body size, and vulnerability factors. The objective of this study was to generate biomechanical targets for human rib response with respect to age, sex, and body size. Two-hundred sixty-one ribs from 171 individuals were dynamically loaded to failure in anterior-posterior bending. Force and displacement at the time of fracture in young adults were greater than in older adults (p < 0.0001). Sex differences were found in those over 40 years old (p < 0.0001). Fracture force from 5th percentile female ribs was lower than 50th and 95th male (p < 0.005). Vulnerable ribs were successfully identified by examining the percentile of both force and displacement at the time of fracture in the proposed samples. The biomechanical targets generated in this study will have useful applications to computational thorax and rib models to aid in injury prevention measures.