RESUMO
Electron transfer activities of metal clusters are fundamentally significant and have promising potential in catalysis, charge or energy storage, sensing, biomedicine and other applications. Strong resonance coupling between the metal core energy states and the ligand molecular orbitals has not been established experimentally, albeit exciting progress has been achieved in the composition and structure determination of these types of nanomaterials recently. In this report, the coupling between core and ligand energy states is demonstrated by the rich electron transfer activities of Au130 clusters. Quantized electron transfers to the core and multi-electron transfers involving the durene-dithiolate ligands were observed at lower and higher potentials, respectively, in voltammetric studies. After a facile multi-electron oxidation from +1.34 to +1.40 V, several reversal reduction processes at more negative potentials, i.e. +0.91 V, +0.18 V and -0.34 V, were observed in an electrochemically irreversible fashion or with sluggish kinetics. The number of electrons and the shifts of the respective reduction potentials in the reversal process were attributed to the electronic coupling or energy relaxation processes. The electron transfer activities and subsequent relaxation processes are drastically reduced at lower temperatures. The time- and temperature-dependent relaxation, involving multiple energy states in the reversal reduction processes upon the oxidation of ligands, reveals the coupling between core and ligand energy states.
RESUMO
The structure of the recently discovered Au130-thiolate and -dithiolate clusters is explored in a combined experiment-theory approach. Rapid electron diffraction in scanning/transmission electron microscopy (STEM) enables atomic-resolution imaging of the gold core and the comparison with density functional theory (DFT)-optimized realistic structure models. The results are consistent with a 105-atom truncated-decahedral core protected by 25 short staple motifs, incorporating disulfide bridges linking the dithiolate ligands. The optimized structure also accounts, via time-dependent DFT (TD-DFT) simulation, for the distinctive optical absorption spectrum, and rationalizes the special stability underlying the selective formation of the Au130 cluster in high yield. The structure is distinct from, yet shares some features with, each of the known Au102 and Au144/Au146 systems.
RESUMO
A detail study on different aspects of biomolecule immobilization techniques on conducting polymers (CP) for applications in biosensors is described. Comparative studies are conducted in between the different mode of biomolecule immobilization techniques, viz. physical, covalent and electrochemical immobilization onto the conducting polymer films for the fabrication of electrochemical biosensors for clinical, food and environmental monitoring applications. This review focuses on the current status of biomolecule immobilization techniques on CP and their applications in the development of amperometric biosensors.
Assuntos
Materiais Biocompatíveis/química , Técnicas Biossensoriais , Eletroquímica/métodos , Enzimas Imobilizadas/química , Polímeros/química , Adsorção , Animais , Bioquímica/métodos , Físico-Química/métodos , Condutividade Elétrica , Humanos , Modelos Químicos , Nanotecnologia/métodosRESUMO
Rich and tunable physicochemical properties make noble metal clusters promising candidates as novel nanomolecules for a variety of applications. Spectroelectrochemistry analysis is employed to resolve previously inaccessible electronic transitions in Au130 clusters stabilized by a monolayer of di- and monothiolate ligands. Well-defined quantized double-layer charging of the Au core and oxidizable ligands make this Au130 nanocluster unique among others and enable selective electrolysis to different core and ligand charge states. Subsequent analysis of the corresponding absorption changes reveals that different absorption bands originate from different electronic transitions involving both metal core energy states and ligand molecular orbitals. Besides the four discrete absorption bands in the steady-state UV-visible-near-IR absorption spectrum, additional transitions otherwise not detectable are resolved upon selective addition/removal of electrons at cores and ligand energy states, respectively, upon electrolysis. An energy diagram is proposed that successfully explains the major features observed in electrochemistry and absorption spectroscopy. Those assignments are believed applicable and effective to explain similar transitions observed in some other Au thiolate clusters.
RESUMO
A five-to-ten fold enhancement, up to ca. 5-10% quantum efficiency, of near IR luminescence from monothiolate protected gold nanoclusters was achieved by heating in the presence of excess ligand thiols. An emission maximum in the 700-900 nm range makes these Au nanoclusters superior for bioimaging applications over other emissions centered below 650 nm due to reduced background interference, albeit visible emissions could have higher quantum efficiency. The heating procedure is shown to be effective to improve the luminescence of Au nanoclusters synthesized under a variety of conditions using two types of monothiols: mercaptosuccinic acid and tiopronin. Therefore, this heating method is believed to be a generalizable approach to improve the near IR luminescence of aqueous soluble Au nanoclusters, which enables better bioimaging applications. The high quantum yield is found relatively stable over a wide pH range. PEGylation of the Au nanoclusters reduces their quantum efficiency but improves their permeation into the cytoplasm. Interestingly, z-stack confocal analysis clearly reveals the presence of Au nanoclusters inside the cell nucleus in single cell imaging. The finding addresses controversial literature reports and demonstrates the internalization and heterogeneous subcellular distributions, particularly inside the nucleus. The high luminescence intensity, small overall dimension, cell and nuclear distribution, chemical stability and low-to-non toxicity make these Au nanoclusters promising probes for broad cell dynamics and imaging applications.
Assuntos
Ouro/química , Nanoestruturas/química , Compostos de Sulfidrila/química , Células HEK293 , Humanos , Microscopia Confocal , Tamanho da Partícula , Polietilenoglicóis/química , Teoria Quântica , Tiomalatos/química , Tiopronina/químicaRESUMO
As a result of rapid industrialization several chemical forms of organic and inorganic mercury are constantly introduced to the environment and affect humans and animals directly. All forms of mercury have toxic effects; therefore accurate measurement of mercury is of prime importance especially in suspended particulate matter (SPM) collected through high volume sampler (HVS). In the quantification of mercury in SPM samples several steps are involved from sampling to final result. The quality, reliability and confidence level of the analyzed data depends upon the measurement uncertainty of the whole process. Evaluation of measurement uncertainty of results is one of the requirements of the standard ISO/IEC 17025:2005 (European Standard EN IS/ISO/IEC 17025:2005, issue1:1-28, 2006). In the presented study the uncertainty estimation in mercury determination in suspended particulate matter (SPM) has been carried out using cold vapor Atomic Absorption Spectrometer-Hydride Generator (AAS-HG) technique followed by wet chemical digestion process. For the calculation of uncertainty, we have considered many general potential sources of uncertainty. After the analysis of data of seven diverse sites of Delhi, it has been concluded that the mercury concentration varies from 1.59 ± 0.37 to 14.5 ± 2.9 ng/m(3) with 95% confidence level (k = 2).
RESUMO
The impacts of Au-thiolate bonding on the near infrared (IR) luminescence of Au nanoclusters are studied by designing two types of monolayer reactions. Firstly, 1,4-dithiol durene (durene-DT) is reacted with Au(25) monolayer protected clusters (MPCs) stabilized by phenylethanethiolate (PhC2S) ligands. Upon the addition of durene-DT, the near IR luminescence of Au MPCs intensifies while the well-defined absorbance bands diminish. The optical transition is associated with the ligand exchange process monitored by proton NMR. In the second approach, PhC2S monothiols are reacted with durene-DT stabilized Au nanoclusters (DTCs). The addition of PhC2S to the Au DTCs induces the gradual decrease of the near IR luminescence. Mass spectrometry and NMR analysis reveal similar final products of mixed thiolate Au nanoclusters from both reactions. The results suggest that the 1,4-dithiolate-Au bonding interaction is a promising factor to further enhance the near IR luminescence of Au nanoclusters for biomedical applications.
RESUMO
A novel synthesis of the production of luminescent zinc oxide (ZnO), either in its intrinsic, metal, non-metal-doped or composite forms with high yield has been developed by parallel iterative techniques, within a combinatorial library prepared by the reduction of nitroarenes. The reduction of nitroarenes by aluminium/zinc dusts in alkaline medium (pH 10±2) forms azoxy compounds, whereas in acidic medium (pH 4.9±0.2) forms phenyl hydroxylamine and zinc/aluminium dust gets oxidised into respective hydroxide. Here, we demonstrate the reduction of nitroarenes at neutral pH (7.0±0.2), which forms intrinsic as well as doped ZnO at 50±5°C using zinc dust alone or mixtures of salts of several transition and non-transition metals in presence of 1:10 ratio of solvent and water. Interestingly, it is observed that the photoluminescence emission could be tuned in a wide range from 390 to 615 nm useful for many display related devices.
RESUMO
Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM) is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India) for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG). In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31st Jan. 2008 to 7th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m3 with 95% confidence level (k = 2).